Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-31 06:09:56 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/arch/arm64/boot/dts/ti
History
Hrushikesh Salunke 974e6cfd8d arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances 
In AM69 SoC there are 4 instances of the 4 lane SERDES. So in
"serdes_ln_ctrl" node there are total 16 entries in "mux-reg-mask"
property. But "idle-states" is defined only for the lanes of first two
SERDES instances. SERDES lane mapping is left at its reset state of
"zero" for all four lanes of SERDES2 and SERDES4. The reset state of
"zero" corresponds to the following configuration:

Lanes 0 and 1 of SERDES2 are unused
CPSW MAC Ports 1 and 2 mapped to lanes 2 and 3 of SERDES2
EDP Lanes 0, 1, 2 and 3 mapped to lanes 0, 1, 2 and 3 of SERDES4

For completeness, define the "idle-states" for the lanes of remaining
SERDES instances.

Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250708113942.4137917-1-h-salunke@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2025-07-11 10:09:15 +05:30
..
k3-am6xx-phycore-disable-eth-phy.dtso arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy 2024-06-19 22:40:55 +05:30
k3-am6xx-phycore-disable-rtc.dtso arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc 2024-06-19 22:40:55 +05:30
k3-am6xx-phycore-disable-spi-nor.dtso arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable spi nor 2024-06-19 22:40:55 +05:30
k3-am6xx-phycore-qspi-nor.dtso arm64: dts: ti: k3-am6xx-phycore-qspi-nor: Add overlay to enable QSPI NOR 2024-07-01 21:36:06 +05:30
k3-am62-lp-sk-nand.dtso arm64: dts: ti: am62-lp-sk: Add overlay for NAND expansion card 2024-07-01 21:36:06 +05:30
k3-am62-lp-sk.dts arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file 2025-07-09 11:37:13 +05:30
k3-am62-main.dtsi arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support 2025-07-09 11:37:13 +05:30
k3-am62-mcu.dtsi arm64: dts: ti: k3-am62: Add M4F remoteproc node 2024-10-20 22:02:07 +05:30
k3-am62-phycore-som.dtsi arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors 2025-05-09 06:20:25 -05:00
k3-am62-pocketbeagle2.dts arm64: dts: ti: Add k3-am62-pocketbeagle2 2025-04-18 13:30:03 -05:00
k3-am62-thermal.dtsi arm64: dts: ti: k3-am62: Enable CPU freq throttling on thermal alert 2024-08-24 14:41:42 -05:00
k3-am62-verdin-dahlia.dtsi arm64: dts: ti: k3-am625-verdin: Add EEPROM compatible fallback 2025-04-18 13:28:13 -05:00
k3-am62-verdin-dev.dtsi arm64: dts: k3-am625-verdin: enable nau8822 pll 2024-07-01 21:36:06 +05:30
k3-am62-verdin-ivy.dtsi arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board 2024-11-03 11:29:57 +05:30
k3-am62-verdin-mallow.dtsi arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog 2024-04-09 19:29:15 -05:00
k3-am62-verdin-nonwifi.dtsi
k3-am62-verdin-wifi.dtsi arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs 2024-02-19 12:02:47 +05:30
k3-am62-verdin-yavia.dtsi arm64: dts: ti: k3-am625-verdin: Add EEPROM compatible fallback 2025-04-18 13:28:13 -05:00
k3-am62-verdin.dtsi arm64: dts: ti: k3-am62-verdin: Enable pull-ups on I2C buses 2025-06-21 22:17:47 +05:30
k3-am62-wakeup.dtsi arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node 2025-05-06 07:29:51 -05:00
k3-am62.dtsi arm64: dts: ti: k3-am62: Add ATCM and BTCM cbass ranges 2025-05-06 07:29:51 -05:00
k3-am62a7-phyboard-lyra-rdk.dts arm64: dts: ti: k3-am62a7-phyboard-lyra-rdk: Update ethernet internal delay 2024-10-20 22:43:44 +05:30
k3-am62a7-sk.dts arm64: dts: ti: k3-am62a7-sk: add boot phase tags 2025-07-11 10:08:56 +05:30
k3-am62a7.dtsi arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert 2025-05-09 06:18:30 -05:00
k3-am62a-main.dtsi arm64: dts: ti: Add bootph property to nodes at source for am62a 2025-07-10 09:49:13 +05:30
k3-am62a-mcu.dtsi arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node 2025-05-06 07:29:51 -05:00
k3-am62a-phycore-som.dtsi arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP 2025-05-09 06:20:25 -05:00
k3-am62a-thermal.dtsi arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert 2025-05-09 06:18:30 -05:00
k3-am62a-wakeup.dtsi arm64: dts: ti: Add bootph property to nodes at source for am62a 2025-07-10 09:49:13 +05:30
k3-am62a.dtsi arm64: dts: ti: k3-am62a: Add E5010 JPEG Encoder 2024-08-28 12:31:45 -05:00
k3-am62d2-evm.dts arm64: dts: ti: Add support for AM62D2-EVM 2025-07-10 09:49:13 +05:30
k3-am62d2.dtsi arm64: dts: ti: Add support for AM62D2-EVM 2025-07-10 09:49:13 +05:30
k3-am62p5-sk.dts arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot 2025-07-10 09:50:14 +05:30
k3-am62p5-verdin-nonwifi-dahlia.dts arm64: dts: ti: am62p-verdin: Add dahlia 2025-05-02 08:30:07 -05:00
k3-am62p5-verdin-nonwifi-dev.dts arm64: dts: ti: Add Toradex Verdin AM62P 2025-05-02 08:30:04 -05:00
k3-am62p5-verdin-nonwifi-ivy.dts arm64: dts: ti: am62p-verdin: Add ivy 2025-05-02 08:30:50 -05:00
k3-am62p5-verdin-nonwifi-mallow.dts arm64: dts: ti: am62p-verdin: Add mallow 2025-05-02 08:30:20 -05:00
k3-am62p5-verdin-nonwifi-yavia.dts arm64: dts: ti: am62p-verdin: Add yavia 2025-05-02 08:30:24 -05:00
k3-am62p5-verdin-wifi-dahlia.dts arm64: dts: ti: am62p-verdin: Add dahlia 2025-05-02 08:30:07 -05:00
k3-am62p5-verdin-wifi-dev.dts arm64: dts: ti: Add Toradex Verdin AM62P 2025-05-02 08:30:04 -05:00
k3-am62p5-verdin-wifi-ivy.dts arm64: dts: ti: am62p-verdin: Add ivy 2025-05-02 08:30:50 -05:00
k3-am62p5-verdin-wifi-mallow.dts arm64: dts: ti: am62p-verdin: Add mallow 2025-05-02 08:30:20 -05:00
k3-am62p5-verdin-wifi-yavia.dts arm64: dts: ti: am62p-verdin: Add yavia 2025-05-02 08:30:24 -05:00
k3-am62p5.dtsi arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert 2025-07-09 16:08:24 +05:30
k3-am62p-j722s-common-main.dtsi arm64: dts: ti: k3-am62p-j722s: fix pinctrl-single size 2025-06-21 22:17:47 +05:30
k3-am62p-j722s-common-mcu.dtsi arm64: dts: ti: k3-am62p: fix pinctrl settings 2025-03-05 09:46:09 +05:30
k3-am62p-j722s-common-thermal.dtsi arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert 2025-07-09 16:08:24 +05:30
k3-am62p-j722s-common-wakeup.dtsi arm64: dts: ti: k3-am62p-j722s-common-wakeup: Configure ti-sysc for wkup_uart0 2025-03-02 18:43:33 +05:30
k3-am62p-main.dtsi arm64: dts: ti: k3-am62p: fix pinctrl settings 2025-03-05 09:46:09 +05:30
k3-am62p-verdin-dahlia.dtsi arm64: dts: ti: am62p-verdin: Add dahlia 2025-05-02 08:30:07 -05:00
k3-am62p-verdin-dev.dtsi arm64: dts: ti: Add Toradex Verdin AM62P 2025-05-02 08:30:04 -05:00
k3-am62p-verdin-ivy.dtsi arm64: dts: ti: am62p-verdin: Add ivy 2025-05-02 08:30:50 -05:00
k3-am62p-verdin-mallow.dtsi arm64: dts: ti: am62p-verdin: Add mallow 2025-05-02 08:30:20 -05:00
k3-am62p-verdin-nonwifi.dtsi arm64: dts: ti: Add Toradex Verdin AM62P 2025-05-02 08:30:04 -05:00
k3-am62p-verdin-wifi.dtsi arm64: dts: ti: Add Toradex Verdin AM62P 2025-05-02 08:30:04 -05:00
k3-am62p-verdin-yavia.dtsi arm64: dts: ti: am62p-verdin: Add yavia 2025-05-02 08:30:24 -05:00
k3-am62p-verdin.dtsi arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points 2025-07-09 16:08:25 +05:30
k3-am62p.dtsi arm64: dts: ti: k3-am62p-j722s: Move AM62P specific USB1 to am62p-main.dtsi 2024-06-19 22:44:43 +05:30
k3-am62x-phyboard-lyra-gpio-fan.dtso arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps 2025-05-09 06:18:30 -05:00
k3-am62x-phyboard-lyra.dtsi arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags 2025-03-07 18:48:05 +05:30
k3-am62x-sk-common.dtsi arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file 2025-07-09 11:37:13 +05:30
k3-am62x-sk-csi2-imx219.dtso arm64: dts: ti: k3-am62x: Add required voltage supplies for IMX219 2025-05-06 07:27:06 -05:00
k3-am62x-sk-csi2-ov5640.dtso arm64: dts: ti: k3-am62x: Add required voltage supplies for OV5640 2025-05-06 07:27:06 -05:00
k3-am62x-sk-csi2-tevi-ov5640.dtso arm64: dts: ti: k3-am62x: Add required voltage supplies for TEVI-OV5640 2025-05-06 07:27:06 -05:00
k3-am62x-sk-hdmi-audio.dtso arm64: dts: ti: k3-am625: Add MIT license along with GPL-2.0 2024-02-06 18:20:42 +05:30
k3-am64-main.dtsi arm64: dts: ti: k3-am64-main: Switch to 64-bit address space for PCIe0 2025-05-02 08:29:18 -05:00
k3-am64-mcu.dtsi arm64: dts: ti: k3-am64: Add M4F remoteproc node 2024-10-20 22:02:07 +05:30
k3-am64-phycore-som.dtsi arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style 2025-03-07 18:48:05 +05:30
k3-am64-thermal.dtsi arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso arm64: dts: ti: k3-am64-tqma64xxl: relicense to GPL-2.0-only OR MIT 2024-07-01 21:36:06 +05:30
k3-am64-tqma64xxl-mbax4xxl-wlan.dtso arm64: dts: ti: k3-am64-tqma64xxl: relicense to GPL-2.0-only OR MIT 2024-07-01 21:36:06 +05:30
k3-am64.dtsi arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am65-iot2050-arduino-connector.dtsi arm64: dts: ti: iot2050: Factor out arduino connector bits 2024-02-15 19:43:25 +05:30
k3-am65-iot2050-common-pg1.dtsi arm64: dts: ti: iot2050: Add IEP interrupts for SR1.0 devices 2024-06-19 10:56:10 +01:00
k3-am65-iot2050-common-pg2.dtsi arm64: dts: ti: iot2050: Disable lock-step for all iot2050 boards 2024-08-28 12:30:52 -05:00
k3-am65-iot2050-common.dtsi arm64: dts: ti: iot2050: Declare Ethernet PHY leds 2024-09-01 14:02:20 -05:00
k3-am65-iot2050-dp.dtsi arm64: dts: ti: iot2050: Factor out DP related bits 2024-02-15 19:43:25 +05:30
k3-am65-iot2050-usb3.dtsi arm64: dts: ti: iot2050: Factor out enabling of USB3 support 2024-02-15 19:43:25 +05:30
k3-am65-main.dtsi arm64: dts: ti: k3-am65: add boot phase tags 2025-07-11 10:08:48 +05:30
k3-am65-mcu.dtsi arm64: dts: ti: k3-am65: Add ESM nodes 2024-09-01 14:02:20 -05:00
k3-am65-wakeup.dtsi arm64: dts: ti: k3-am65: add boot phase tags 2025-07-11 10:08:48 +05:30
k3-am65.dtsi arm64: dts: ti: k3-am65: Include entire FSS region in ranges 2024-09-01 13:37:41 -05:00
k3-am67a-beagley-ai.dts arm64: dts: ti: k3-am67a-beagley-ai: Add bootph for main_gpio1 2025-04-21 07:55:44 -05:00
k3-am68-phyboard-izar.dts arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x 2025-04-25 15:57:15 -05:00
k3-am68-phycore-som.dtsi arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x 2025-04-25 15:57:15 -05:00
k3-am68-sk-base-board-pcie1-ep.dtso arm64: dts: ti: k3-j721s2: Add PCIe ctrl node to scm_conf region 2025-04-18 13:28:12 -05:00
k3-am68-sk-base-board.dts arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot 2025-07-10 09:50:14 +05:30
k3-am68-sk-som.dtsi arm64: dts: ti: k3-am68-sk*: Add bootph-* properties 2024-10-28 20:47:23 +05:30
k3-am69-sk-pcie0-ep.dtso arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode 2025-01-08 09:22:00 -06:00
k3-am69-sk.dts arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances 2025-07-11 10:09:15 +05:30
k3-am625-beagleplay-csi2-ov5640.dtso arm64: dts: ti: k3-am625-beagleplay: Add required voltage supplies for OV5640 2025-05-06 07:27:44 -05:00
k3-am625-beagleplay-csi2-tevi-ov5640.dtso arm64: dts: ti: k3-am625-beagleplay: Add required voltage supplies for TEVI-OV5640 2025-05-06 07:27:44 -05:00
k3-am625-beagleplay.dts arm64: dts: ti: k3-am6*: Remove disable-wp for eMMC 2025-05-02 08:14:05 -05:00
k3-am625-phyboard-lyra-rdk.dts arm64: dts: ti: Add am62x-phyboard-lyra carrier board 2024-07-01 21:36:06 +05:30
k3-am625-sk.dts arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file 2025-07-09 11:37:13 +05:30
k3-am625-verdin-nonwifi-dahlia.dts
k3-am625-verdin-nonwifi-dev.dts
k3-am625-verdin-nonwifi-ivy.dts arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board 2024-11-03 11:29:57 +05:30
k3-am625-verdin-nonwifi-mallow.dts
k3-am625-verdin-nonwifi-yavia.dts
k3-am625-verdin-wifi-dahlia.dts
k3-am625-verdin-wifi-dev.dts
k3-am625-verdin-wifi-ivy.dts arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board 2024-11-03 11:29:57 +05:30
k3-am625-verdin-wifi-mallow.dts
k3-am625-verdin-wifi-yavia.dts
k3-am625.dtsi arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon 2024-11-04 18:56:35 +05:30
k3-am642-evm-icssg1-dualemac-mii.dtso arm64: dts: ti: k3-am642-evm-icssg1-dualemac: add overlay for mii mode 2024-06-12 21:31:28 +05:30
k3-am642-evm-icssg1-dualemac.dtso arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port 2024-02-19 14:12:18 +05:30
k3-am642-evm-nand.dtso arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names 2024-09-01 13:39:00 -05:00
k3-am642-evm-pcie0-ep.dtso arm64: dts: ti: k3-am642-evm-pcie0-ep: Add boot phase tag to "pcie0_ep" 2025-06-21 22:17:48 +05:30
k3-am642-evm.dts arm64: dts: ti: k3-am64: Reserve timers used by MCU FW 2025-05-06 07:29:51 -05:00
k3-am642-hummingboard-t-pcie.dts arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts 2025-01-08 09:23:23 -06:00
k3-am642-hummingboard-t-usb3.dts arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts 2025-01-08 09:23:23 -06:00
k3-am642-hummingboard-t.dts arm64: dts: ti: k3-am642-hummingboard-t: correct rs485 rts polarity 2024-06-12 21:31:27 +05:30
k3-am642-phyboard-electra-gpio-fan.dtso arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan 2024-04-29 14:35:29 -05:00
k3-am642-phyboard-electra-pcie-usb2.dtso arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe 2024-06-19 22:40:55 +05:30
k3-am642-phyboard-electra-rdk.dts arm64: dts: ti: k3-am642-phyboard-electra: Fix PRU-ICSSG Ethernet ports 2025-06-21 22:17:28 +05:30
k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector 2025-03-05 09:46:09 +05:30
k3-am642-sk.dts arm64: dts: ti: k3-am64: Reserve timers used by MCU FW 2025-05-06 07:29:51 -05:00
k3-am642-sr-som.dtsi arm64: dts: ti: k3-am64*: Disable ethernet by default at SoC level 2024-08-28 12:17:37 -05:00
k3-am642-tqma64xxl-mbax4xxl.dts arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties 2024-12-26 14:03:39 -06:00
k3-am642-tqma64xxl.dtsi arm64: dts: ti: k3-am64-tqma64xxl: relicense to GPL-2.0-only OR MIT 2024-07-01 21:36:06 +05:30
k3-am642.dtsi arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am652.dtsi arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am654-base-board-rocktech-rk101-panel.dtso arm64: dts: ti: am65x: Add missing power-supply for Rocktech-rk101 panel 2025-04-25 15:47:22 -05:00
k3-am654-base-board.dts arm64: dts: ti: k3-am654-base-board: add boot phase tags 2025-07-11 10:08:56 +05:30
k3-am654-icssg2.dtso arm64: dts: ti: k3-am654-icssg2: Add ti,pa-stats property 2024-10-20 22:44:54 +05:30
k3-am654-idk.dtso arm64: dts: ti: k3-am654-icssg2: Add ti,pa-stats property 2024-10-20 22:44:54 +05:30
k3-am654-industrial-thermal.dtsi arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am654-pcie-usb2.dtso arm64: dts: ti: k3-am654-base-board: add boot phase tags 2025-07-11 10:08:56 +05:30
k3-am654-pcie-usb3.dtso arm64: dts: ti: k3-am654-base-board: add boot phase tags 2025-07-11 10:08:56 +05:30
k3-am654.dtsi arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-am6528-iot2050-basic-common.dtsi arm64: dts: ti: iot2050: Factor out arduino connector bits 2024-02-15 19:43:25 +05:30
k3-am6528-iot2050-basic-pg2.dts arm64: dts: ti: iot2050: Factor out DP related bits 2024-02-15 19:43:25 +05:30
k3-am6528-iot2050-basic.dts arm64: dts: ti: iot2050: Disable lock-step for all iot2050 boards 2024-08-28 12:30:52 -05:00
k3-am6548-iot2050-advanced-common.dtsi arm64: dts: ti: k3-am6*: Remove disable-wp for eMMC 2025-05-02 08:14:05 -05:00
k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso arm64: dts: ti: iot2050: Add overlays for M.2 used by firmware 2024-08-28 12:30:56 -05:00
k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso arm64: dts: ti: iot2050: Add overlays for M.2 used by firmware 2024-08-28 12:30:56 -05:00
k3-am6548-iot2050-advanced-m2.dts arm64: dts: ti: iot2050: Factor out DP related bits 2024-02-15 19:43:25 +05:30
k3-am6548-iot2050-advanced-pg2.dts arm64: dts: ti: iot2050: Factor out DP related bits 2024-02-15 19:43:25 +05:30
k3-am6548-iot2050-advanced-sm.dts arm64: dts: ti: iot2050: Support IOT2050-SM variant 2024-02-15 19:43:25 +05:30
k3-am6548-iot2050-advanced.dts arm64: dts: ti: iot2050: Factor out arduino connector bits 2024-02-15 19:43:25 +05:30
k3-j721e-beagleboneai64.dts arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations 2024-08-28 12:14:06 -05:00
k3-j721e-common-proc-board-infotainment.dtso arm64: dts: ti: k3-j721e-common-proc-board-infotainment: Update to comply with device tree schema 2025-04-25 15:45:46 -05:00
k3-j721e-common-proc-board.dts arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E 2025-05-09 06:18:13 -05:00
k3-j721e-evm-gesi-exp-board.dtso arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j721e-evm-pcie0-ep.dtso arm64: dts: ti: k3-j721e: Add PCIe ctrl node to scm_conf region 2025-04-18 13:28:12 -05:00
k3-j721e-evm-pcie1-ep.dtso arm64: dts: ti: k3-j721e: Add PCIe ctrl node to scm_conf region 2025-04-18 13:28:12 -05:00
k3-j721e-evm-quad-port-eth-exp.dtso arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j721e-main.dtsi arm64: dts: ti: k3-j721e-main: Switch to 64-bit address space for PCIe0 and PCIe1 2025-05-02 08:29:34 -05:00
k3-j721e-mcu-wakeup.dtsi arm64: dts: ti: k3-j721e: Fix clock IDs for MCSPI instances 2024-10-28 20:50:40 +05:30
k3-j721e-sk-csi2-dual-imx219.dtso arm64: dts: ti: k3-j721e-sk: Add requiried voltage supplies for IMX219 2025-04-18 13:28:12 -05:00
k3-j721e-sk.dts arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators 2025-04-18 13:27:58 -05:00
k3-j721e-som-p0.dtsi arm64: dts: ti: k3-j721e-evm*: Add bootph-* properties 2024-10-28 20:47:24 +05:30
k3-j721e-thermal.dtsi arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j721e.dtsi arm64: dts: ti: k3-j721e: Add ranges for PCIe0 DAT1 and PCIe1 DAT1 2025-05-02 08:29:30 -05:00
k3-j721s2-common-proc-board.dts arm64: dts: ti: k3-j721s2-evm*: Add bootph-* properties 2024-10-28 20:47:23 +05:30
k3-j721s2-evm-gesi-exp-board.dtso arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name 2024-09-01 13:39:29 -05:00
k3-j721s2-evm-pcie1-ep.dtso arm64: dts: ti: k3-j721s2: Add PCIe ctrl node to scm_conf region 2025-04-18 13:28:12 -05:00
k3-j721s2-main.dtsi arm64: dts: ti: k3-j721s2-main: Add McASP nodes 2025-06-21 22:17:47 +05:30
k3-j721s2-mcu-wakeup.dtsi arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances 2024-10-28 20:50:40 +05:30
k3-j721s2-som-p0.dtsi arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details 2025-03-02 18:43:33 +05:30
k3-j721s2-thermal.dtsi arm64: dts: ti: k3-j721s2: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j721s2.dtsi arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges 2024-09-01 13:37:51 -05:00
k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219 2025-05-09 06:21:57 -05:00
k3-j722s-evm-csi2-quad-tevi-ov5640.dtso arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640 2025-05-09 06:21:57 -05:00
k3-j722s-evm.dts arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot 2025-07-10 09:50:14 +05:30
k3-j722s-main.dtsi arm64: dts: ti: k3-j722s-main: Add audio-refclk0 node 2025-06-21 22:17:47 +05:30
k3-j722s.dtsi arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert 2025-07-09 16:08:24 +05:30
k3-j742s2-evm.dts arm64: dts: ti: Add support for J742S2 EVM board 2024-10-13 03:33:25 +05:30
k3-j742s2-main.dtsi arm64: dts: ti: Introduce J742S2 SoC family 2024-10-13 03:33:25 +05:30
k3-j742s2.dtsi arm64: dts: ti: Introduce J742S2 SoC family 2024-10-13 03:33:25 +05:30
k3-j784s4-evm-pcie0-pcie1-ep.dtso arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode 2024-06-12 21:39:40 +05:30
k3-j784s4-evm-quad-port-eth-exp1.dtso arm64: dts: ti: k3-j784s4-evm-quad-port-eth-exp1: Remove duplicate hogs 2025-02-24 15:43:30 +05:30
k3-j784s4-evm-usxgmii-exp1-exp2.dtso arm64: dts: ti: k3-j784s4-evm-usxgmii-exp1-exp2: drop pinctrl-names 2025-04-18 13:13:57 -05:00
k3-j784s4-evm.dts arm64: dts: ti: Refactor J784s4-evm to a common file 2024-10-13 03:33:24 +05:30
k3-j784s4-j742s2-common.dtsi arm64: dts: ti: Refactor J784s4 SoC files to a common file 2024-10-13 03:33:24 +05:30
k3-j784s4-j742s2-evm-common.dtsi arm64: dts: ti: k3-j784s4-j742s2-evm-common: Enable ACSPCIE0 output for PCIe1 2025-05-02 08:29:57 -05:00
k3-j784s4-j742s2-evm-usb0-type-a.dtso arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A 2025-04-21 07:55:50 -05:00
k3-j784s4-j742s2-main-common.dtsi arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node 2025-07-09 11:37:13 +05:30
k3-j784s4-j742s2-mcu-wakeup-common.dtsi arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible 2025-01-02 10:18:51 -06:00
k3-j784s4-j742s2-thermal-common.dtsi arm64: dts: ti: Refactor J784s4 SoC files to a common file 2024-10-13 03:33:24 +05:30
k3-j784s4-main.dtsi arm64: dts: ti: Refactor J784s4 SoC files to a common file 2024-10-13 03:33:24 +05:30
k3-j784s4.dtsi arm64: dts: ti: Refactor J784s4 SoC files to a common file 2024-10-13 03:33:24 +05:30
k3-j7200-common-proc-board.dts arm64: dts: ti: k3-j7200: Add node to disable loopback connection 2025-01-02 10:19:59 -06:00
k3-j7200-evm-pcie1-ep.dtso arm64: dts: ti: k3-j7200: Add PCIe ctrl node to scm_conf region 2025-04-18 13:28:12 -05:00
k3-j7200-evm-quad-port-eth-exp.dtso arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j7200-main.dtsi arm64: dts: ti: k3-j7200-main: Switch to 64-bit address space for PCIe1 2025-05-02 08:29:25 -05:00
k3-j7200-mcu-wakeup.dtsi arm64: dts: ti: k3-j7200: Add node to disable loopback connection 2025-01-02 10:19:59 -06:00
k3-j7200-som-p0.dtsi arm64: dts: ti: k3-j7200-evm*: Add bootph-* properties 2024-10-28 20:47:24 +05:30
k3-j7200-thermal.dtsi arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-j7200.dtsi arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0 2024-02-06 18:20:43 +05:30
k3-pinctrl.h arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs 2025-07-10 09:49:13 +05:30
k3-serdes.h arm64: dts: ti: k3-serdes: Add SERDES0/SERDES1 lane-muxing macros for J722S 2024-06-19 22:44:43 +05:30
Makefile arm64: dts: ti: Add support for AM62D2-EVM 2025-07-10 09:49:13 +05:30