IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add LDOA2 regulator from MP5496 to support SDCC voltage scaling.
Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-6-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the labels of mp5496 regulator from ipq6018 to mp5496.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250210070122.208842-5-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some IPQ60xx SoCs don't come with the mp5496 pmic chip. The mp5496
pmic was never part of the IPQ60xx SoC, it's optional, so we moved
it out of the soc dtsi.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-4-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The early version of IPQ6000 (SoC id: IPQ6018, SBL version:
BOOT.XF.0.3-00077-IPQ60xxLZB-2) and IPQ6005 SoCs can reach
a max frequency of 1.5GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-3-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The final version of IPQ6000 (SoC id: IPQ6000, SBL version:
BOOT.XF.0.3-00086-IPQ60xxLZB-1) has a max design frequency
of 1.2GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sa8775p-ride platform uses the QCA6698 Bluetooth chip. While the
QCA6698 shares the same IP core as the WCN6855, it has different RF
components and RAM sizes, requiring new firmware files. Use the
firmware-name property to specify the NVM and rampatch firmware to load.
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250110063914.28001-2-quic_chejiang@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make this USB controller consistent with the others on this platform.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250109205232.92336-1-kettenis@openbsd.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB5 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-2-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB3 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-1-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Link: https://lore.kernel.org/r/20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMU node for WCN6750 present on the qcs6490-rb3gen2
board and assign its power outputs to the Bluetooth module.
In WCN6750 module sw_ctrl and wifi-enable pins are handled
in the wifi controller firmware. Therefore, it is not required
to have those pins' entries in the PMU node.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250221171014.120946-2-quic_janathot@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OPP tables for each CPU clusters (cpu0-1, cpu2-3-4, cpu5-6 & cpu7)
to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
frequency by aggregating bandwidth requests of all CPU core with referenc
to the current OPP they are configured in by the LMH/EPSS hardware.
The effect is a proper caches & DDR frequency scaling when CPU cores
changes frequency.
The OPP tables were built using the downstream memlat ddr, llcc & l3
tables for each cluster types with the actual EPSS cpufreq LUT tables
from running HDK and QRD devices.
The cpu2 and cpu5 tables are similar but must be kept separate to
take in account that they define OPP for shared CPUs of two different
clusters that can scale separately, thus vote different bandwidths.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-3-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the interconnect entry for each cpu, with 3 different paths:
- CPU to Last Level Cache Controller (LLCC)
- Last Level Cache Controller (LLCC) to DDR
- L3 Cache from CPU to DDR interface
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-2-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite implements Server Base System Architecture (SBSA) specification
compliant generic watchdog.
Describe it.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250212-x1e80100-add-watchdog-v2-1-a73897f0dad5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for vadc and adc-tm channels which are used for
monitoring thermistors present on the platform.
- Add the necessary includes for qcom,spmi-adc7-pm7325 and
qcom,spmi-adc7-pmk8350.
- Add thermal zones for quiet-thermal, sdm-skin-thermal, and
xo-thermal, and define their polling delays and thermal sensors.
- Configure the pm7325_temp_alarm node to use the pmk8350_vadc
channel for thermal monitoring.
- Configure the pmk8350_adc_tm node to enable its thermal sensors
and define their registers and settings.
- Configure the pmk8350_vadc node to define its channels and settings
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212113342.873086-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.
Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).
example:
Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
Method (_PSV, 0, NotSerialized) // _PSV: Passive Temperature
{
Return (\_SB.TZ15.TPSV)
}
Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
Method (_CRT, 0, NotSerialized) // _CRT: Critical Temperature
{
Return (\_SB.TZ15.TCRT)
}
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250111083209.262269-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the binding for qcom,spmi-pmic-arb, the cell 1 should be
slave id, the slave id of pmc8280_2 is 3.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111083209.262269-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no use wasting power on keeping the links between the CPU and
something else online when the CPUs are online. Change the interconnect
tag for such paths, so that RPMh is requested to automatically
clock-gate those when possible.
Keeping these paths online is also a potential power collapse blocker,
however this commit alone doesn't magically fix all the remaining
TODOs related to suspend.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-2-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We see the addition of eleven new SoCs, including a total of sixx arm64
chips from Qualcomm alone. Overall, the Qualcomm platforms once again
make up the majority of all changes, after a couple of quieter releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of
the V4H (R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips
using Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial
IOT platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that
only need new devicetree files. Two additional SoCs in new
families are part of a separate branch.
There are 48 new machines in total, including six arm32 ones based
on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores,
and a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek,
Qualcomm, Renesas and Rockchips and cover development boards, phones,
laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features.
-----BEGIN PGP SIGNATURE-----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=vdmR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
Other x1e machines use _dtbs.elf for these firmwares, which matches the
filenames shipped by Windows.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250108124500.44011-1-joel@jms.id.au
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Samsung S6E88A0-AMS427AP24 panel to the device tree for the
Samsung Galaxy S4 Mini Value Edition. By default the panel displays
everything horizontally flipped, so add "flip-horizontal" to the panel
node to correct that.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Co-developed-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114220718.12248-1-jahau@rocketmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-3-4049cfccd073@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-2-4049cfccd073@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove properties which are both unused in the kernel and undocumented.
Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241115193435.3618831-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMI8950 LAB-IBB regulator nodes, with the
PMI8998 compatible as fallback.
The LAB-IBB regulators are used as panels supplies
on existing phones or tablets.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241115-topic-sdm450-upstream-lab-ibb-v1-1-8a8e74befbfe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable support for download mode to collect RAM dumps in case
of system crash, facilitating post mortem analysis.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204141416.1352545-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sm8250 SoC.
Fixes: 30325603b9 ("arm64: dts: qcom: sm8250: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sdm845 SoC.
Fixes: d48a6698a6 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the CAMSS device tree node for sc8280xp SoC.
Fixes: 5994dd6075 ("arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241127122950.885982-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable primary USB controller on QCS8300 Ride platform. The primary USB
controller is made "peripheral", as this is intended to be connected to
a host for debugging use cases.
For using the controller in host mode, changing the dr_mode and adding
appropriate pinctrl nodes to provide vbus would be sufficient.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For both the controller instances, size of the 'addr_space' region should
be 0x1fe00000 as per the hardware memory layout.
Otherwise, endpoint drivers cannot request even reasonable BAR size of 1MB.
Cc: stable@vger.kernel.org # 6.11
Fixes: c5f5de8434 ("arm64: dts: qcom: sa8775p: Add ep pcie1 controller node")
Fixes: 1924f55182 ("arm64: dts: qcom: sa8775p: Add ep pcie0 controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241231130224.38206-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPQ5424 SoC has both USB2.0 and USB3.0 controllers. The USB3.0
can connect to either of USB2.0 or USB3.0 phy and operate in the
respective mode.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241118052839.382431-7-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a DT node for Last level cache (aka. system cache) controller
which provides control over the last level cache present on
IPQ5424 SoCs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-4-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.
On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.
Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Lenovo ThinkPad T14s, the fingerprint reader placed in the power
button is connected via the usb_2 controller. The controller has only
a USB 2.0 PHY which is then connected via a NXP PTN3222 eUSB2 repeater,
which in turn is connected to the Goodix fingerprint reader.
So enable all the usb_2 controller and PHY nodes, set dual-role mode to
host and describe the eUSB2 repeater in order to get the fingerprint
reader discovered.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-t14-enable-fingerprint-sensor-v1-1-8fd911d39ad1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add following coresight components for x1e80100 platform.
It includes CTI, dummy sink, dynamic Funnel, Replicator, STM,
TPDM, TPDA and TMC ETF.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Yushan Li <quic_yushli@quicinc.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Link: https://lore.kernel.org/r/20241205054904.535465-1-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the SerDes PHY on qcs8300-ride. Add the MDC and MDIO pin functions
for ethernet0 on qcs8300-ride. Enable the ethernet port on qcs8300-ride.
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241206-dts_qcs8300-v5-2-422e4fda292d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the node for the first ethernet interface on qcs8300 platform.
Add the internal SGMII/SerDes PHY node as well.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Link: https://lore.kernel.org/r/20241206-dts_qcs8300-v5-1-422e4fda292d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "capacity-dmips-mhz" and "dynamic-power-coefficient" are used to
build Energy Model which in turn is used by EAS to take placement
decisions. So add it to QCS8300 SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241206-qcs8300_dpc-v1-1-af2e8e6d3da9@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add "capacity-dmips-mhz" and "dynamic-power-coefficient" to the QCS615 SoC.
They are used to build the energy model, which in turn is used by EAS to
take placement decisions.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241211-add_cpu_capacity_and_dpc_properties-v1-1-03aaee023a77@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now that the FSUSB42 USB switches are described, enable support for DP on
the three USB-C ports of the X1E80100 QCP. It supports up to 4 lanes, but
for now we need to limit this to 2 lanes due to limitations in the USB/DP
combo PHY driver. The same limitation also exists on other boards upstream.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241212-x1e80100-qcp-dp-v1-3-37cb362a0dfe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike most X1E boards, the QCP does not have Parade PS8830 retimers on the
three USB-C ports. Instead, there are FSUSB42 USB switches for each port
that handle orientation switching for the SBU lines. The overall setup is
similar to the gpio-sbu-mux defined for sc8280xp-crd and the ThinkPad X13s.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241212-x1e80100-qcp-dp-v1-2-37cb362a0dfe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make sure the remoteproc reg ranges reflect the entire register space
they refer to.
Since they're unused by the driver, there's no functional change.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241212-topic-8280_rproc_reg-v1-1-bd1c696e91b0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0a40_0000 with length of 0x4040.
0x0ab0_0000, value used so far, is the SSC_QUPV3 block, so entierly
unrelated.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-23-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x4040. Value of 0x100000 covers
entire Touring/CDSP memory block seems to big here.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-22-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x100 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-21-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 41c72f36b2 ("arm64: dts: qcom: sdx75: Add remoteproc node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-20-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0608_0000 with length of 0x10000.
0x0600_0000, value used so far, is the main region of Modem.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Fixes: 31cc61104f ("arm64: dts: qcom: sm6375: Add modem nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-19-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0b30_0000 with length of 0x10000.
0x0b00_0000, value used so far, is the main region of CDSP.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-18-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP (Peripheral Authentication Service) remoteproc
node should point to the QDSP PUB address space (QDSP6...SS_PUB) which
has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-17-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 489be59b63 ("arm64: dts: qcom: sm6350: Add MPSS nodes")
Cc: stable@vger.kernel.org
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-16-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP (Peripheral Authentication Service) remoteproc
node should point to the QDSP PUB address space (QDSP6...SS_PUB) which
has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: efc33c969f ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Cc: stable@vger.kernel.org
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-15-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 5f2a9cd4b1 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-14-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP and was
simply copied from other/older DTS.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 5f2a9cd4b1 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-13-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-12-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-11-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream
DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite
different and points to unused area.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-10-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-9-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-8-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream
DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite
different and points to unused area.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-7-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-6-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-5-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches
downstream DTS. 0x3000_0000, value used so far, was in datasheet is the
region of CDSP.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-4-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-3-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0a30_0000 with length of 0x10000. 0x9890_0000,
value used so far, was copied from downstream DTS, is in the middle of
RAM/DDR space and downstream DTS describes the PIL loader, which is a
bit different interface. Datasheet says that one of the main CDSP
address spaces is 0x0980_0000, which is oddly similar to 0x9890_0000,
but quite different.
Assume existing value (thus downstream DTS) is not really describing the
intended CDSP PAS region.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-2-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000. 0x1730_0000,
value used so far, was copied from downstream DTS, is in the middle of
unused space and downstream DTS describes the PIL loader, which is a bit
different interface.
Assume existing value (thus downstream DTS) is not really describing the
intended ADSP PAS region.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-1-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241217101017.2933587-2-quic_yuanjiey@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The camera clock controller on SDM670 controls the clocks that drive the
camera subsystem. The clocks are the same as on SDM845. Add the camera
clock controller for SDM670.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241218231729.270137-11-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the gpio-ranges for the QCS8300 TLMM pin controller to include
GPIOs 0-132 and the UFS_RESET pin for primary UFS memory reset.
Fixes: 7be190e4bd ("arm64: dts: qcom: add QCS8300 platform")
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241219-correct_gpio_ranges-v2-6-19af8588dbd0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the gpio-ranges for the QCS615 TLMM pin controller to include
GPIOs 0-122 and the UFS_RESET pin for primary UFS memory reset.
Fixes: 8e266654a2 ("arm64: dts: qcom: add QCS615 platform")
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241219-correct_gpio_ranges-v2-5-19af8588dbd0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
RNG hardware versions greater than 3.0 are Truly Random Number
Generators (TRNG). In IPQ5332, the RNGblock is a TRNG.
This patch corrects the compatible property which correctly describes
the hardware without making any functional changes
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20241226114500.2623804-5-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
RNG hardware versions greater than 3.0 are Truly Random Number
Generators (TRNG). In IPQ9574, the RNGblock is a TRNG.
This patch corrects the compatible property which correctly describes
the hardware without making any functional changes
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20241226114500.2623804-4-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add TRNG (Truly Random Number Generator) node for ipq5424
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20241226114500.2623804-3-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the EEPROMs which are found on the different camera sensors on
this device.
The pull-up regulator for these I2C busses is vreg_l6p, the same supply
that powers VCC of all the EEPROMs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103-fp5-cam-eeprom-v1-5-88dee1b36f8e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the common vreg_ prefix to the labels of the regulator-fixed. Also
make sure the nodes are sorted alphabetically.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103-fp5-cam-eeprom-v1-4-88dee1b36f8e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Serial engines 4 and 5 on the IPQ5424 support SPI. Serial engine 4 is
exclusively dedicated to SPI, whereas serial engine 5 is firmware based
and supports SPI, I2C, and UART.
The SPI instance operates on serial engine 4, designated as spi0, and on
serial engine 5, designated as spi1. Add both the spi0 and spi1 nodes.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103063708.3256467-2-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
xo_board_clk is fixed to 24 MHZ, which is routed from WiFi output clock
48 MHZ (also being the reference clock of CMN PLL) divided 2 by analog
block routing channel.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-5-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMN PLL clock controller allows selection of an input clock rate
from a defined set of input clock rates. It in-turn supplies fixed
rate output clocks to the hardware blocks that provide the ethernet
functions such as PPE (Packet Process Engine) and connected switch or
PHY, and to GCC.
The reference clock of CMN PLL is routed from XO to the CMN PLL through
the internal WiFi block.
.XO (48 MHZ or 96 MHZ)-->WiFi (multiplier/divider)-->48 MHZ to CMN PLL.
The reference input clock from WiFi to CMN PLL is fully controlled by
the bootstrap pins which select the XO frequency (48 MHZ or 96 MHZ).
Based on this frequency, the divider in the internal Wi-Fi block is
automatically configured by hardware (1 for 48 MHZ, 2 for 96 MHZ), to
ensure output clock to CMN PLL is 48 MHZ.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-4-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the psci power domain node names to match the bindings.
This Fixes:
sc7180-acer-aspire1.dts: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6', 'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241230-topic-misc-dt-fixes-v4-5-1e6880e9dda3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the 5v-choke thermal zone to satisfy the bindings.
This fixes:
sc7180-trogdor-pompom-r2-lte.dts: thermal-zones: '5v-choke-thermal' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241230-topic-misc-dt-fixes-v4-4-1e6880e9dda3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ov7251node has bindings check errors in the endpoint, and the
camera node was disabled since the beginning. Even when switching the
node to okay, the endpoint description to the csiphy is missing along
with the csiphy parameters.
Drop the ov7251 camera entirely until it's properly described.
This obviously fixes:
sdm845-db845c-navigation-mezzanine.dtso: camera@60: port:endpoint:data-lanes: [0, 1] is too long
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241230-topic-misc-dt-fixes-v4-2-1e6880e9dda3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-18-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-17-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-16-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-15-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-14-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-13-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
3. On targets like SDX75, intermittent disconnects were observed
with certain cables due to impedence variations.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-12-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-11-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-10-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-9-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On QCS6490-Rb3Gen2 Vision kit, ADB connection is heavily unstable
when U1/U2 is enabled. Often when link enters U2, there is a re-
enumeration seen and device is unusable for many use cases.
3. On QCS8300/QCS9100, it is observed that when Link enters U2, when
the cable is disconnected and reconnected to host PC in HS, there
is no link status change interrupt seen and the plug-in in HS doesn't
show up a bus reset and enumeration failure happens.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-8-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-7-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-6-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-5-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-4-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-3-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable U1 and U2 power-saving states to improve stability of USB.
These low-power link states, designed to reduce power consumption
during idle periods, can cause issues in latency-sensitive or high
throughput use cases. Over the years, some of the issues seen are
as follows:
1. In device mode of operation, when UVC is active, enabling U1/U2
is sometimes causing packets drops due to delay in entry/exit of
intermittent these low power states. These packet drops are often
reflected as missed isochronous transfers, as the controller wasn't
able to send packet in that microframe interval and hence glitches
are seen on the final transmitted video output.
2. On older targets like SM8150/SM8250/SM8350, there have been
throughput issues seen during tethering use cases.
Disabling these intermittent power states enhances device stability
without affecting power usage.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241231081115.3149850-2-quic_prashk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CPU-to-SDHC interconnect path for the SDHC_2 needs to have the
active-only tags. The tags are missing entirely on for the SDHC_4
controller interconnect paths.
Fix all tags for both controllers.
Fixes: ffb21c1e19 ("arm64: dts: qcom: x1e80100: Describe the SDHC controllers")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-x1e80100-qcp-sdhc-fixes-v1-1-cd971f7f0955@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add sound node and dsp-related piece to enable HDMI audio
playback support on Qualcomm QRB4210 RB2 board. That is the
only sound output supported for now.
The audio playback is verified using the following commands:
amixer -c0 cset iface=MIXER,name='SEC_MI2S_RX Audio Mixer MultiMedia1' 1
aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241112025306.712122-5-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node required for audio subsystem on Qualcomm
QRB4210 RB2. QRB4210 is based on sm4250 which has a slightly different
lpass pin controller comparing to sm6115.
While at this, also add description of lpi_i2s2 pins (active state)
required for audio playback via HDMI.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241112025306.712122-4-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is a mismatch between 'reg' property and unit address for last
there CDSP compute context banks. Current values were taken as-is from
downstream source. Considering that 'reg' is used by Linux driver as
SID of context bank and that least significant bytes of IOMMU value
match the 'reg', assume the unit-address is wrong and needs fixing.
This also won't have any practical impact, except adhering to Devicetree
spec.
Fixes: dae8cdb0a9 ("arm64: dts: qcom: sm8650: Add three missing fastrpc-compute-cb nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241104144204.114279-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QDU1000 and QRU1000 devices define XO and clocks completely in the
board files, despite qdu1000.dtsi file referencing them directly. Follow
the example of other platforms and move clock definitions to the
qdu1000.dtsi file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-21-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SDM670 devices define XO and clocks completely in the
board files, despite sdm670.dtsi file referencing them directly. Follow
the example of other platforms and move clock definitions to the
sdm670.dtsi file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-20-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
sc8180x.dtsi already defines 38.4 MHz clock frequency for the XO clock.
Drop duplicate overrides from Primus and Lenovo Flex 5G DT files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-19-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X1E80100 platform uses PMK8550 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-18-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8450 platform uses PMK8350 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 5188049c9b ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-15-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8350 platform uses PMK8350 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: b7e8f433a6 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-14-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8250 platform uses PM8150 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 9ff8b0591f ("arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-13-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM6375 platform uses PM6125 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 59d34ca97f ("arm64: dts: qcom: Add initial device tree for SM6375")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-12-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM6125 platform uses PM6125 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-11-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM4450 platform uses PM4450 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 7a1fd03e74 ("arm64: dts: qcom: Adds base SM4450 DTSI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-10-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SDX75 platform uses PMK8550 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 9181bb9399 ("arm64: dts: qcom: Add SDX75 platform and IDP board support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-9-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC7280 platform uses PMK8350 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 7a1f4e7f74 ("arm64: dts: qcom: sc7280: Add basic dts/dtsi files for sc7280 soc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-8-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SAR2130P platform uses PM8150 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: be9115bfe5 ("arm64: dts: qcom: sar2130p: add support for SAR2130P")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-7-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm RB2 board uses PM6125 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 8d58a8c0d9 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-6-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Q[DR]U1000 platforms use PM8150 to provide sleep clock. According to
the documentation, that clock has 32.7645 kHz frequency. Correct the
sleep clock definition.
Fixes: d1f2cfe2f6 ("arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-5-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS40x platforms use PMS405 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 9181bb9399 ("arm64: dts: qcom: Add SDX75 platform and IDP board support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-4-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MSM8994 platform uses PM8994/6 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: feeaf56ac7 ("arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-3-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MSM8939 platform uses PM8916 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-2-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MSM8916 platform uses PM8916 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: f4fb6aeafa ("arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-1-e9b08fbeadd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM8650 lists two interconnects for the display subsystem, mdp0-mem
(between MDP and LLCC) and mdp1-mem (between LLCC and EBI, memory).
The second interconnect is a misuse. mdpN-mem paths should be used for
several outboud MDP interconnects rather than the path between LLCC and
memory. This kind of misuse can result in bandwidth underflows, possibly
degrading picture quality as the required memory bandwidth is divided
between all mdpN-mem paths (and LLCC-EBI should not be a part of such
division).
Drop the second path and use direct MDP-EBI path for mdp0-mem until we
support separate MDP-LLCC and LLCC-EBI paths.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241026-fix-sm8x50-mdp-icc-v2-2-fd8ddf755acc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM8550 lists two interconnects for the display subsystem, mdp0-mem
(between MDP and LLCC) and mdp1-mem (between LLCC and EBI, memory).
The second interconnect is a misuse. mdpN-mem paths should be used for
several outboud MDP interconnects rather than the path between LLCC and
memory. This kind of misuse can result in bandwidth underflows, possibly
degrading picture quality as the required memory bandwidth is divided
between all mdpN-mem paths (and LLCC-EBI should not be a part of such
division).
Drop the second path and use direct MDP-EBI path for mdp0-mem until we
support separate MDP-LLCC and LLCC-EBI paths.
Fixes: d7da51db5b ("arm64: dts: qcom: sm8550: add display hardware devices")
Cc: stable@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-fix-sm8x50-mdp-icc-v2-1-fd8ddf755acc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Last Level Cache Controller node on the QCS8300 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241031-qcs8300_llcc-v3-3-bb56952cb83b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each GPU OPP requires a specific peak DDR bandwidth, let's add
those to each OPP and also the related interconnect path.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241217-topic-sm8x50-gpu-bw-vote-v6-7-1adaf97e7310@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each GPU OPP requires a specific peak DDR bandwidth, let's add
those to each OPP and also the related interconnect path.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241217-topic-sm8x50-gpu-bw-vote-v6-6-1adaf97e7310@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable secondary USB controller on QCS615 Ride platform. The secondary
USB controller is made "host", as it is a Type-A port.
Secondary USB controller of QCS615 Ride has Type-A port exposed for
connecting peripheral. The VBUS to the peripheral is provided by
TPS2549IRTERQ1 regulator connected to the port. The regulator has an
enable pin controlled by PM8150. Model it as fixed regulator and keep it
Always-On at boot, since the regulator is GPIO controlled regulator.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Co-developed-by: Song Xue <quic_songxue@quicinc.com>
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241218-add_usb_host_mode_for_qcs615-v3-2-d9d29fe39a4b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for secondary USB controller and its high-speed phy
on QCS615.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Co-developed-by: Song Xue <quic_songxue@quicinc.com>
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Link: https://lore.kernel.org/r/20241218-add_usb_host_mode_for_qcs615-v3-1-d9d29fe39a4b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ID 434 is for SM6350 while 459 is for SM7225. Fairphone 4 is only
SM7225, so drop the unused 434 entry.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-fp4-msm-id-v1-1-2b75af02032a@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an initial devicetree for the Huawei Matebook E Go, which is based on
sc8280xp.
There are 3 variants, Huawei released first 2 at the same time.
Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3.
Huawei Matebook E Go 2023(sc8280xp@2.69GHz).
We add support for the latter two variants.
This work started by Tianyu Gao and Xuecong Chen, they made the
devicetree based on existing work(i.e. the Lenovo X13s and the
Qualcomm CRD), it can boot with framebuffer.
Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts
Later, I got my device, I continue their work.
Supported features:
- adsp
- bluetooth (connect issue)
- charge (with a lower power)
- framebuffer
- gpu
- keyboard (via internal USB)
- pcie devices (wifi and nvme, no modem)
- speakers and microphones
- tablet mode switch
- touchscreen
- usb
- volume key and power key
Some key features not supported yet:
- battery and charger information report (EC driver required)
- built-in display (cannot enable backlight yet)
- charging thresholds control (EC driver required)
- camera
- LID switch detection (EC driver required)
- USB Type-C altmode (EC driver required)
- USB Type-C PD (EC driver required)
I have finished the EC driver, once this series are upstreamed,
I will submit a series of patches to enable EC support.
Co-developed-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Co-developed-by: Xuecong Chen <chenxuecong2009@outlook.com>
Signed-off-by: Xuecong Chen <chenxuecong2009@outlook.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20241220160530.444864-4-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PM8937 features integrated peripherals like ADC, GPIO controller,
MPPs, PON keys and others.
Add the device tree so that any boards with this PMIC can use it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241221-msm8917-v11-1-901a74db4805@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 QCP, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Cc: stable@vger.kernel.org
Fixes: 20676f7819 ("arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-8-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-microsoft-romulus mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-7-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-lenovo-yoga-slim7x mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-6-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-dell-xps13-9345 mostly just mirrors the power supplies from
the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-5-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Cc: stable@vger.kernel.org
Fixes: ae5cee8e73 ("arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-4-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-asus-vivobook-s15 mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-3-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e78100-lenovo-thinkpad-t14s mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-2-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e001de-devkit mostly just mirrors the power supplies from the
x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-1-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Asus vivobook s15 uses the ATNA56AC03 panel.
This panel is controlled by the atna33xc20 driver instead of the generic
edp-panel driver
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20241204-asus_qcom_display-v6-1-91079cd8234e@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce device tree for the HP Omnibook X Laptop 14-fe0750ng
(hp-omnibook-x14). It is a Laptop based on the Qualcomm Snapdragon
X Elite SoC. There seem to be other SKUs, some with Wifi-7 (WCN7850)
instead of Wifi-6E (WCN6855). This dt explicitly supports WCN6855,
I haven't found a good way yet to describe both.
PDF link: https://www8.hp.com/h20195/V2/GetPDF.aspx/c08989140
Supported features:
- Keyboard (no function keys though)
- Display
- PWM brightness control (works via brightnessctl)
- Touchpad
- Touchscreen
- PCIe ports (pcie4, pcie6a)
- USB type-c, type-a
- WCN6855 Wifi-6E
- WCN6855 Bluetooth
- ADSP and CDSP
- X1 GPU
- GPIO Keys (Lid switch)
- Audio definition (works via USB)
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241202-hp-omnibook-x14-v3-3-0fcd96483723@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the uart14 instance for X1E80100 (typically used for Bluetooth).
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241007-x1e80100-pwrseq-qcp-v1-2-f7166510ab17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the power domains and OPP tables to all the QUP-related UART/I2C/SPI
nodes to ensure that we vote for the necessary performance states. Similar
to sm8350.dtsi, the OPPs depend on the QUP instance. The first two
instances in each geniqup group need &rpmhpd_opp_svs starting at 120MHz,
the others already starting at 100MHz. I2C always runs at a lower clock
frequency and therefore uses a fixed vote.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241007-x1e80100-pwrseq-qcp-v1-1-f7166510ab17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reboot modes were originally managed by PMIC pon driver on mobile/IoT
platforms, such as sm8150,sm8250,qdu1000... But recently, QCS615 is
going to adopt PSCI to manage linux reboot modes, which involves firm
wares to co-work with. In this case, reboot-modes should be removed
from pon dts node to avoid conflicting. This implies that reboot modes
go with devices rather than PMICs as well.
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202-adds-spmi-pmic-peripherals-for-qcs615-v6-2-bdd306b4940d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite QCP board has 3 USB-A ports. The ones labed as USB3 and
USB4/6 are both connected to the multiport controller, each one via a
separate NXP PTN3222 eUSB2-to-USB2 redriver to the eUSB2 PHY for
High-Speed support, with a dedicated QMP PHY for SuperSpeed support.
Describe these two redrivers and enable each pair of PHYs along with the
USB controller, all in order to enable support for these 2 USB-A ports.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241202-x1e80100-qcp-t14-enable-usb-type-a-ports-v2-2-7360ed65c769@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Thinkpad T14s has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.
Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241202-x1e80100-qcp-t14-enable-usb-type-a-ports-v2-1-7360ed65c769@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing interrupt lines and fix qusb2_phy being an impostor
of hs_phy_irq.
This happens to also fix warnings such as:
usb@6af8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq'] is too short
Fixes: 4753492de9 ("arm64: dts: qcom: msm8996: Add usb3 interrupts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-qcom_usb_dtb_fixup-v1-3-cba24120c058@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add following coresight components for QCS8300 platform.
It includes CTI, dummy sink, dynamic Funnel, Replicator, STM,
TPDM, TPDA and TMC ETF.
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241219024208.3462358-1-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for audio on Lenovo T14s laptop, coming with two speakers,
audio jack and two digital microphones.
This is very early work, not yet complete:
1. 2x speakers: work OK.
2. 2x digital microphones: work OK.
3. Headset (audio jack) recording: does not work.
4. Headphones playback (audio jack): channels are intermixed.
[krzysztof: correct DMIC routing and vamacro pinctrl, re-order nodes,
add commit msg]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241203111229.48967-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Although the HDK has no radio, the IPA part is still perfectly usable
(altough it doesn't register any real networking devices). Enable it to
make it possible to test IPA on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230310203438.1585701-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bluetooth node and this bluetooth module is connected to uart.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20241201135716.141691-3-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add qca6390-pmu node, which is used to manage power supply sequence for wifi and
bluetooth on sm8250 soc based devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20241201135716.141691-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As pointed out by Intel's robot, the node name doesn't adhere to
dt-bindings.
Fix errors like this one:
qcs9100-ride.dtb: qcom,gpi-dma@800000: $nodename:0: 'qcom,gpi-dma@800000' does not match '^dma-controller(@.*)?$'
Fixes: 34d17ccb5d ("arm64: dts: qcom: sa8775p: Add GPI configuration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411080206.vFLRjIBZ-lkp@intel.com/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241107-topic-sa8775_dma-v1-1-eb633e07b007@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss. edp0 and edp1 correspond to the DP controllers of
mdss0, whereas edp2 and edp3 correspond to the DP controllers of
mdss1. This change enables only the DP controllers, DPTX0 and DPTX1
alongside their corresponding PHYs of mdss0, which have been
validated.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241125105747.6595-3-quic_mukhopad@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree nodes for the DPTX0 and DPTX1 controllers
with their corresponding PHYs found on Qualcomm SA8775P SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Link: https://lore.kernel.org/r/20241125105747.6595-2-quic_mukhopad@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcs8300 SoC has a True Random Number Generator, add the node with
the correct compatible set.
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241125064317.1748451-3-quic_yrangana@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 4f79d0deae ("arm64: dts: qcom: sa8775p: add CPU idle states")
already added cpu and cluster idle-states but have not added CPU devices
to psci power domain without which idle states do not get detected.
Add CPUs to psci power domain.
Fixes: 4f79d0deae ("arm64: dts: qcom: sa8775p: add CPU idle states")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241112-sa8775p_cpuidle-v1-1-66ff3ba72464@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Pixel 3a has two identical flash LEDs. Add them together.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241112024050.669578-9-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The commit adding these nodes did not use a SoC-specific node, fix that
to comply with bindings guidelines.
Fixes: 34d17ccb5d ("arm64: dts: qcom: sa8775p: Add GPI configuration")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241108-topic-sa8775_dma2-v1-2-1d3b0d08d153@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for video, camera, display0 and display1 clock controllers
on SA8775P. The dispcc1 will be enabled based on board requirements.
Reviewed-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-sa8775p-mm-v4-resend-patches-v6-2-329a2cac09ae@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UFS driver expects to be able to set load (and by extension, mode)
on its supply regulators. Add the necessary properties to make that
possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Link: https://lore.kernel.org/r/20241017122858.3664474-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LP5562 led@1 reg property should likely be set to 1 to match
the unit. Fix it.
Fixes: 4ac46b3682 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241006022012.366601-1-marex@denx.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
RB3 Gen2 has a trio of LEDs connected to the PM8350C's Light Pulse
Generator. Describe them.
Use the "red channel" as a panic indicator by default.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
[bjorn: Corrected colors]
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241004-rb3gen2-leds-v1-2-437cdbb4f6c0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The downstream tree described more SDAM slices on the PMIC. Some of
them are actually required by other peripherals, whereas other are nice
to add for hardware description purposes.
Add them in.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241004-rb3gen2-leds-v1-1-437cdbb4f6c0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The secure device(fused) cannot bootup with TPDM_DCC device. So
disable it in DT.
Fixes: 6596118ccd ("arm64: dts: qcom: Add coresight nodes for SA8775p")
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241219025216.3463527-1-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the lid switch for the Lenovo Yoga Slim 7x.
Other x1e80100 laptops use the GPIO pin 92 only, however on the Yoga
Slim 7x this pin seems to be bridged with the pin 71. By default, the
pin 71 is set as output-high, which blocks any event on pin 92.
This patch sets the pin 71 as output-disable and sets the LID switch on
pin 92. This is aligned with how they're configured on Windows:
GPIO 71 | 0xf147000 | in | func0 | hi | pull up | 16 mA
GPIO 92 | 0xf15c000 | in | func0 | lo | no pull | 2 mA
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://lore.kernel.org/r/20241219-patch-lenovo-yoga-v3-1-9c4a79068141@mailbox.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The path MASTER_QUP_0 to SLAVE_EBI_CH0 would be qup-memory path and not
qup-config. Since the qup-memory path is not part of the qcom,geni-uart
bindings, just replace that path with the correct path for qup-config.
Fixes: b179f35b88 ("arm64: dts: qcom: sm6350: add uart1 node")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-uart1-icc-v1-1-f4f10fd91adf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SD card slot found on the X1E001DE Snapdragon Devkit for windows
board is controlled by SDC2 instance, so enable it.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025123551.3528206-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One of the SD card slots found on the X Elite QCP board is
controlled by the SDC2.
Enable it and describe the board specific resources.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241212-x1e80100-qcp-sdhc-v4-2-a74c48ee68a3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite platform features two SDHC v5 controllers.
Describe the controllers along with the pin configuration in TLMM
for the SDC2, since they are hardwired and cannot be muxed to any
other function. The SDC4 pin configuration can be muxed to different
functions, so leave those to board specific dts.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241212-x1e80100-qcp-sdhc-v4-1-a74c48ee68a3@linaro.org
[bjorn: Replaced 0s with QCOM_ICC_TAG_ALWAYS]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CPU and LLCC BWMON nodes and their corresponding opp tables to
support bandwidth monitoring on QCS615 SoC. This is necessary to enable
power management and optimize system performance from the perspective of
dynamically changing LLCC and DDR frequencies.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241218-add_bwmon_support_for_qcs615-v1-2-680d798a19e5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit f042bc234c.
A recent change enabling role switching for the x1e80100 USB-C
controllers breaks UCSI and DisplayPort Alternate Mode when the
controllers are in host mode:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init failed, stop trying
As enabling OTG mode currently breaks SuperSpeed hotplug and suspend,
and with retimer (and orientation detection) support not even merged
yet, let's revert at least until we have stable host mode in mainline.
Fixes: f042bc234c ("arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/all/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef
Link: https://lore.kernel.org/lkml/Z1gbyXk-SktGjL6-@hovoldconsulting.com/
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210111444.26240-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit 2dd3250191.
A recent change enabling OTG mode on the x1e81000 CRD breaks suspend.
Specifically, the device hard resets during resume if suspended with all
controllers in device mode (i.e. no USB device connected).
The corresponding change on the T14s also led to SuperSpeed hotplugs not
being detected.
With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.
Fixes: 2dd3250191 ("arm64: dts: qcom: x1e80100-crd: enable otg on usb ports")
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210111444.26240-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As per memory map table, the region for PCIe6a is 64MByte. Hence, set the
size of 32 bit non-prefetchable memory region beginning on address
0x70300000 as 0x3d00000 so that BAR space assigned to BAR registers can be
allocated from 0x70300000 to 0x74000000.
Fixes: 7af1418500 ("arm64: dts: qcom: x1e80100: Fix up BAR spaces")
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241113080508.3458849-1-quic_qianyu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit 1a48dd7b9a.
A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C
ports can break SuperSpeed device hotplugging. The host controller is
enumerated, but the device is not:
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.5.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x000080a000000810
xhci-hcd xhci-hcd.5.auto: irq 247, io mem 0x0a800000
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Once this happens on either of the two ports, no amount of disconnecting
and reconnecting makes the SuperSpeed device be enumerated, while
FullSpeed device enumeration still works.
With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.
Fixes: 1a48dd7b9a ("arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports")
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241206172402.20724-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At the moment, x1e80100-pmics.dtsi enables two of the SMB2360 PMICs by
default and leaves the other two disabled. The third one was originally
also enabled by default, but then disabled in commit a237b8da41 ("arm64:
dts: qcom: x1e80100: Disable SMB2360_2 by default"). This is inconsistent
and confusing. Some laptops will even need SMB2360_1 disabled by default if
they just have a single USB-C port.
Make this consistent by keeping all SMB2360 disabled in x1e80100-pmics.dtsi
and enable them separately for all boards where needed. That way it is
always clear which ones are available and avoids accidentally trying to
read/write from missing chips when some of the PMICs are not present.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-disable-smb2360-v2-1-2449be2eca29@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
UFS and booting to shell with uart console.
Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
(added ufs, adsp and gpdsp nodes).
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241203-qcs8300_initial_dtsi-v4-4-d7c953484024@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial DTSI for QCS8300 SoC.
Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- GCC and RPMHCC
- TLMM
- Interconnect
- QuP with uart
- SMMU
- QFPROM
- Rpmhpd power controller
- UFS
- Inter-Processor Communication Controller
- SRAM
- Remoteprocs including ADSP,CDSP and GPDSP
- BWMONs
Written with help from Zhenhua Huang(added the smmu node), Xin Liu(added
ufs, adsp and gpdsp nodes), Tingguo Cheng(added the rpmhpd node), Kyle
Deng(added the aoss_qmp node), Raviteja Laggyshetty(added interconnect
nodes) and Cong Zhang(added the INTID of EL2 non-secure physical timer).
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241203-qcs8300_initial_dtsi-v4-3-d7c953484024@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable primary USB controller on QCS615 Ride platform. The primary USB
controller is made "peripheral", as this is intended to be connected to
a host for debugging use cases.
For using the controller in host mode, changing the dr_mode and adding
appropriate pinctrl nodes to provide vbus would be sufficient.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241121063007.2737908-3-quic_kriskura@quicinc.com
[bjorn: Fixed subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for primary USB controller and its PHYs on
QCS615.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241121063007.2737908-2-quic_kriskura@quicinc.com
[bjorn: Fixed subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the APPS SMMU node for QCS615 platform. Add the dma-ranges
to limit DMA address range to 36bit width to align with system
architecture.
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241105032107.9552-4-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the SCM node for QCS615 platform. It is an interface to
communicate to the secure firmware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Link: https://lore.kernel.org/r/20241105032107.9552-3-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS615 platform has LLCC(Last Level Cache Controller) as the system
cache controller. It includes 1 LLCC instance and 1 LLCC broadcast
interface.
Add LLCC node support for the QCS615 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Link: https://lore.kernel.org/r/20241031-add_llcc_dts_node_for_qcs615-v2-1-205766a607ca@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Always-On Subsystem Qualcomm Message Protocol(AOSS_QMP) node for
QCS615 SoC. The AOSS_QMP enables the system to send and receive messages
on the SoC and uses the same hardware version as sdm845.
Signed-off-by: Kyle Deng <quic_chunkaid@quicinc.com>
Link: https://lore.kernel.org/r/20241018073417.2338864-4-quic_chunkaid@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with uart console.
Written with help from Tingguo Cheng (added regulator nodes).
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-4-9dde8d7b80b0@quicinc.com
[bjorn: Fix subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial DTSI for QCS615 SoC.
Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- QFPROM
- TLMM
- Watchdog
- RPMH controller
- Sleep stats driver
- Rpmhpd power controller
- Interconnect
- GCC and Rpmhcc
- QUP with Uart serial support
Written with help from Tingguo Cheng (added rpmhpd power controller nodes)
Taniya Das (added clocks nodes), and Raviteja Laggyshetty (added
interconnect nodes).
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-3-9dde8d7b80b0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For both the controller instances, size of the 'addr_space' region should
be 0x1fe00000 as per the hardware memory layout.
Otherwise, endpoint drivers cannot request even reasonable BAR size of 1MB.
Cc: stable@vger.kernel.org # 6.11
Fixes: c5f5de8434 ("arm64: dts: qcom: sa8775p: Add ep pcie1 controller node")
Fixes: 1924f55182 ("arm64: dts: qcom: sa8775p: Add ep pcie0 controller node")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241128145147.145618-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Laptop 7 features two USB-C ports, each one sporting a PS8830 USB-C
retimer/mux. Wire them up.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-3-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Surface Laptops have a Realtek RTS5261 SD Card reader connected
over a Gen1x1 link to the PCIe3 host. Set up the necessary bits to
make it functional.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-2-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Laptop 7 features a single pair of speakers and an equal amount of
digital mics.
Add the required nodes to support audio playback and recording.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-1-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the arm64-for-6.13 branch into arm64-for-6.14, to carry forward
the commits that were picked up late in the cycle but didn't make it
into a pull request.
- Add virtual cpufreq driver for guest kernels (David Dai).
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can).
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin
Ian King).
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela).
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=aB0d
-----END PGP SIGNATURE-----
Merge tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These mostly are updates of cpufreq drivers used on ARM platforms plus
one new DT-based cpufreq driver for virtualized guests and two cpuidle
changes that should not make any difference on systems currently in
the field, but will be needed for future development:
- Add virtual cpufreq driver for guest kernels (David Dai)
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can)
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
(Colin Ian King)
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela)
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki)"
* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
cpufreq: sun50i: add a100 cpufreq support
cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cpufreq: loongson3: Check for error code from devm_mutex_init() call
cpufreq: scmi: Fix cleanup path when boost enablement fails
cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
cpufreq: add virtual-cpufreq driver
dt-bindings: cpufreq: add virtual cpufreq device
cpufreq: loongson2: Unregister platform_driver on failure
cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
cppc_cpufreq: Remove HiSilicon CPPC workaround
...
This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc92V4ACgkQYKtH/8kJ
Uie7+xAA5BIu2fSl+cCCOLdWvNulgYJBZfgOC+1vay3A3zykTR5Hd/X4/GOetqb6
uhCJ7MER0md2PBCdffN0JDuDnvBGdOEbHghsY3iqqwP4ad+bk4+Ib/dxgM0uid3t
W2NykLvmXmjFJiwjvMKE4aSPi+lCskLehPC05IIJvM/DplGflIoq7Rf+q5WIvStT
K5kpluJBD81oQkfBn7FwVJWeM6OZ1CZg413m0PNMoojd6SzyPVNGnd004qEHfwkv
Ra1w9cHM2+zagPrkTrFp0bpxfUYwoXiP8uPq9crXrhgeq4JmQBHuTR0ek+mMC2nI
aRgi91za8YPgC8APXks64BBqXCxHVse9n228MpldMAabURez5wMkufNFfQc6yLks
AhQxD2joVFS+i/pE8WyFlS3/aopNUzIbqVyIhpYiYBLz8xQBSv7KjqySRufrBEhP
lMA548uDQK5p1TRnl8L6cDXdHTN9MbqtREIozBeO20iolHJtqLBcw4erZFhwnJsP
2QQVN9P8AXOE/U/RZcV8Wfm7kUoU4FI29G3XlmUnpBmCHQd3Ql2Xv56gaDaAtb3s
hF83uTA8bKjby9Xu0c9JQREeNsLEmI/WwuUWlSEcn1cGBZ5ahg8FMta55H8tpX8O
OizWoPviwUar7HFASA/ZvN0KoPgq/a8HWRXT+Q+/xBBqnHshtLk=
=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
Comply with bindings guidelines and get rid of errors such as:
cpufreq@18323000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,cpufreq-hw'] is too short
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Describe x2 Parade PS8830 retimers for left and right USB Type-C ports
respectively. Adjust graphs between connectors and the PHYs accordingly,
add the voltage regulators. Dell XPS 13" 9345's DSDT describes 3rd
retimer, but its not actually present.
Regulators are _assumed_ to be correct, since:
* tlmm pins match DSDT definition.
* tlmm and pmic gpios were tested and confirmed to be powering
off/resetting respective retimers.
* USB3.0 now works correctly in both orientation, pre and post suspend.
Derived from:
arm64: dts: qcom: x1e80100-t14s: Add external DP support
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241030182153.16256-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The smem is necessary for the socinfo driver. Additionally
smem requires the tcsr_mutex node. Therefore add both the nodes.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241016151528.2893599-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm Snapdragon X Elite Devkit for Windows has the same
configuration as the CRD variant i.e. all 3 of the type C ports
support external DP altmode. Add all the nodes needed to enable
them.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241025123551.3528206-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The x1e001de devkit devices are expected to ship without external
speaker/mic connected, so just enable headphone jack on it.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241025123551.3528206-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bring a range of PCIe fixes across the X Elite platform, as well as
marking the NVMe power supply boot-on to avoid glitching the power
supply during boot.
The X Elite CRD audio configuration sees a spelling mistake corrected.
On SM8450 the PCIe 1 PIPE clock definition is corrected, to fix a
regression where this isn't able to acquire it's clocks.
-----BEGIN PGP SIGNATURE-----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=gD69
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1j8j
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD
More Qualcomm Arm64 DeviceTree fixes for v6.12
Bring a range of PCIe fixes across the X Elite platform, as well as
marking the NVMe power supply boot-on to avoid glitching the power
supply during boot.
The X Elite CRD audio configuration sees a spelling mistake corrected.
On SM8450 the PCIe 1 PIPE clock definition is corrected, to fix a
regression where this isn't able to acquire it's clocks.
* tag 'qcom-arm64-fixes-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-vivobook-s15: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-crd: fix nvme regulator boot glitch
arm64: dts: qcom: x1e78100-t14s: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-crd Rename "Twitter" to "Tweeter"
arm64: dts: qcom: x1e80100: Fix PCIe 6a lanes description
arm64: dts: qcom: sm8450 fix PIPE clock specification for pcie1
arm64: dts: qcom: x1e80100: Add Broadcast_AND region in LLCC block
arm64: dts: qcom: x1e80100: fix PCIe5 PHY clocks
arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks
Link: https://lore.kernel.org/r/20241101143206.738617-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts the conversion to use the mailbox binding for RPM IPC
interrupts, as this broke boot on msm8939.
-----BEGIN PGP SIGNATURE-----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=89/8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmck728ACgkQYKtH/8kJ
Uif5ZQ//eyis5itkdmCTsa01zYNPyLSNi/6id2BVXjUY80hRk3hzcFzsNzSzSvR2
OjkNW+CdSPc3vuud6d/XVE14tckCXlUeE7IiOxZaczaFBis6sBpcLvrF1iiskbgM
F7BcgpoxUjbCi/wFKXrUhNR6FC9pvOLQJZQrTD5DfvS7T/8MSIhrnK/FlTa9DNQZ
rKGBQ3e2pS0dXb7FXswe+2EJShAc87J3s8UsU0al7Wxzfl7TTVwsrwpa8JoYoOn0
ehkACbsvZmh1vkYNGL4SbwbrZ1KFjPyHNLvtYNuHD22HvdMFqlx88jC7/UVsT+XU
j6vz8f3ej2W/aYsvyTVRG46CVbA+EGLsfkHtk26lNbxI6yHRusTkgZIS3y2APpJi
hEGrBoqbrEcxbedlFiSGIXiT98nCgjVM09Nr7iBs1m2Ef/d4u5S89PuE1Ha1iyMS
vKPjTnLWA1053sdL2pnkmkWmtcTXmOPULfm4j1ENGI18zH60LiO3B7Vj0B5/edKf
Kt46aAe8/fgELDHK1O9cF4EOj/JHOVq2hrxXwv/mTJinAXNWYiLEP/oHFUtr16G9
8wHh7B1+mQ8RnmyEvgXfE6l94gw8vNSaw39oT0JtiNvyQkWSreEJAKhfRrD4OzKF
vfybOlNksyg4CC3HiYUkgwNpWVMl7XvmKkgp8J1XaQtRCF6eGa0=
=+1Nf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD
Qualcomm Arm64 DeviceTree fix for v6.12
This reverts the conversion to use the mailbox binding for RPM IPC
interrupts, as this broke boot on msm8939.
* tag 'qcom-arm64-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM
Link: https://lore.kernel.org/r/20241101142414.737828-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
libcamera softisp requires a linux,cma heap export in order to support
user-space debayering, 3a and export to other system components such as
pipewire, Firefox/Chromium - Hangouts, Zoom etc.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-6-cdff2f1a5792@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
libcamera softisp requires a linux,cma heap export in order to support
user-space debayering, 3a and export to other system components such as
pipewire, Firefox/Chromium - Hangouts, Zoom etc.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-5-cdff2f1a5792@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / address / cell size change needs to
be applied to convert.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb3
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-2-cdff2f1a5792@linaro.org
[bjorn: Corrected up makefile syntax, added missing cells for cci_i2c1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / address / cell size change needs to
be applied to convert.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb5
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-1-cdff2f1a5792@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for the WCN6855 PMU, the WLAN and BT modules and relevant
regulators and pin functions to fully describe how the wifi is actually
wired on this platform.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-6-8da8310d9564@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
and bluetooth nodes to consume the PMU's outputs.
With this we can drop the regulator-always-on properties from vreg_s11b
and vreg_s12b as they will now be enabled by the power sequencing
driver.
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-5-8da8310d9564@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the bluetooth node for sc8280xp-crd and make it consume the outputs
from the PMU as per the new DT bindings contract.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-4-8da8310d9564@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for the WCN6855 PMU, the WLAN module and relevant regulators
and pin functions to fully describe how the wifi is actually wired on
this platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-3-8da8310d9564@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The
QCS9100 is a variant of the SA8775p, and they are fully compatible with
each other. The QCS9100 Ride/Ride Rev3 board is essentially the same as
the SA8775p Ride/Ride Rev3 board, with the QCS9100 SoC mounted instead
of the SA8775p.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing HID supplies to avoid relying on other consumers to keep
them on.
This also avoids the following warnings on boot:
i2c_hid_of 0-0010: supply vdd not found, using dummy regulator
i2c_hid_of 0-0010: supply vddl not found, using dummy regulator
i2c_hid_of 1-0015: supply vdd not found, using dummy regulator
i2c_hid_of 1-0015: supply vddl not found, using dummy regulator
i2c_hid_of 1-003a: supply vdd not found, using dummy regulator
i2c_hid_of 1-003a: supply vddl not found, using dummy regulator
Note that VREG_MISC_3P3 is also used for things like the fingerprint
reader which are not yet fully described so mark the regulator as always
on for now.
Fixes: d7e03cce04 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241029075258.19642-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As most other board Miix uses board-id = 0xff, so define calibration
variant to distinguish it from other devices with the same chip_id.
qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240723-miix630-support-v2-5-7d98f6047a17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable two other DSP instances on this platofm, aDSP and SLPI.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240723-miix630-support-v2-2-7d98f6047a17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no point in keeping touchscreen disabled, enable corresponding
i2c-hid device.
04F3:2608 Touchscreen as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input1
04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input2
04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input3
04F3:2608 Stylus as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input4
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240723-miix630-support-v2-1-7d98f6047a17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The fifth PCIe controller is connected to the PCIe North ANoC.
Fix the corresponding interconnect property so that the OS manages the
right path.
Fixes: 62ab23e155 ("arm64: dts: qcom: x1e80100: add PCIe5 nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241024131101.13587-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The fourth PCIe controller is connected to the PCIe North ANoC.
Fix the corresponding interconnect property so that the OS manages the
right path.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241024131101.13587-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 32-bit BAR spaces are reaching outside their assigned register
regions. Shrink them to match their actual sizes.
This resolves an issue where the regions overlap and one of the
controllers won't come up, which can be seen in the log as:
qcom-pcie 1c08000.pci: resource collision: [mem 0x7c300000-0x7fffffff] conflicts with 1c00000.pci dbi [mem 0x7e000000-0x7e000f1c]
While at it, unify the style.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240710-topic-barman-v1-1-5f63fca8d0fc@linaro.org
[bjorn: Added note about overlapping resource regions]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PCIe1 controller and its corresponding PHY nodes on
qcs6490-rb3g2 platform.
SMMU v2 has limited SID's to assign dynamic SID's with the existing
logic. For now, use static iommu-map table assigning unique SID's for
each port as dynamic approach needs boarder community discussions.
PCIe switch connected to this board has 3 downstream ports and
to the one of the downstream an embedded ethernet is connected.
Assign unique SID for each downstream port and to embedded ethernet,
and also reserve a SID for the endpoints which are going to be
connected to the other two downstream ports.
As this PCIe switch is present in this platform only update iommu-map
in this platform only as other board variants might have different
PCIe topology and might need different mapping.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20241024-enable_pcie-v2-1-e5a6f5da74e4@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
tlmm 74 was experimentally found to be panel enable pin, which shall be
high for panel (both low-res IPS, OLED) to work. Define it as such.
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20241016202253.9677-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: eb57cbe730 ("arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources")
Cc: stable@vger.kernel.org # 6.11
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Cc: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Cc: stable@vger.kernel.org # 6.11
Cc: Xilin Wu <wuxilin123@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: eb57cbe730 ("arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources")
Cc: stable@vger.kernel.org # 6.11
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Devicetree binding has documented the node name for UFS controllers as
'ufshc'. So let's use it instead of 'ufs' which is for the UFS devices.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240514-ufs-nodename-fix-v1-2-4c55483ac401@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-17-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-16-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-15-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-14-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-13-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-12-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-11-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-10-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-9-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-8-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-7-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-6-0505bc7d2c56@linaro.org
[bjorn: Update sm7325 references to match the updated case]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-4-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-2-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-1-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-12-263a385fbbcb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.
Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SA8775P SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-9-263a385fbbcb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable download mode for sa8775p which can help collect
ramdump for this SoC.
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240830133908.2246139-2-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011041939.2916179-1-quic_miaoqing@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This makes the name consistent with both other x1e80100 devices and the
dictionary. A UCM fix was merged already and is required in order for
sound to work after this commit.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241019190214.3337-2-maccraft123mc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Snapdragon 778G (SM7325) / 778G+ (SM7325-AE) / 782G (SM7325-AF)
is software-wise very similar to the Snapdragon 7c+ Gen 3 (SC7280).
It uses the Kryo670.
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241020205615.211256-4-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
I2C and SPI geni driver also supports the GSI node based
on client requirements. Currently, in the DTSI, the GSI mode
configuration is not added.
Therefore, add GPI DT nodes for QUPV_0/1/2/3 for I2C and SPI
for the SA8775.
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20241021102815.12079-1-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Resize the GICR register region as it currently seeps into the CPU Control
Processor mailbox RX region.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20240612124056.39230-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix the description and compatible for PCIe 6a, as it is in fact a
4-lanes controller and PHY, but it can also be used in 2-lanes mode. For
4-lanes mode, it uses the lanes provided by PCIe 6b. For 2-lanes mode,
PCIe 6a uses 2 lanes and then PCIe 6b uses the other 2 lanes. The number
of lanes in which the PHY should be configured depends on a TCSR register
value on each individual board.
Cc: stable+noautosel@kernel.org # Depends on pcie-qcom 16.0 GT/s support
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009-x1e80100-dts-fixes-pcie6a-v3-1-14a1163e691b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the x1e80100 vph-pwr regulator nodes to use "regulator" as a
prefix for consistency with the other fixed regulators.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241015122601.16127-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The full register range for ICE on sm8550 is 0x18000 so update the
crypto node.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Co-developed-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241007-wrapped-keys-dts-v8-2-05ee041f2fc1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The full register range for ICE on sm8650 is 0x18000 so update the
crypto node.
Reviewed-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Co-developed-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241007-wrapped-keys-dts-v8-1-05ee041f2fc1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, UART configuration is populated for only a few SEs
(Serial Engines) in the sa8775p DTSI file. Since every SE can
support the UART protocol, usecase or client should have the flexibility
to enable required SE for UART depending on the specific board version.
Hence, populate UART configurations for the remaining SEs in the
sa8775p SoC.
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20241007091407.13798-1-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For historical reasons on SM8450 the second PCIe host (pcie1) also keeps
a reference to the PIPE clock coming from the PHY. Commit e768628406
("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc") has
updated the PHY to use #clock-cells = <1>, making just <&pcie1_phy>
clock specification invalid. Update corresponding clock entry in the
PCIe1 host node.
/soc@0/pcie@1c08000: Failed to get clk index: 2 ret: -22
qcom-pcie 1c08000.pcie: Failed to get clocks
qcom-pcie 1c08000.pcie: probe with driver qcom-pcie failed with error -22
Fixes: e768628406 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241006-fix-sm8450-pcie1-v1-1-4f227c9082ed@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Trackpad HID device on T14s could be found on two possible slave addresses
(hid@15 and hid@2c) on i2c0 instance.
With the current state of DT boot, there is no way to patch the device
tree at runtime during boot. This, however results in non-functional
trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
slave address.
This patch adds hid@2c device along with hid@15 to get it working on
both the variants. This should work as i2c-hid driver will stop
probing the device if there is nothing on the slave address, we can
actually keep both devices enabled in DT, and i2c-hid driver will
only probe the existing one.
The only problem is that we cannot setup pinctrl in both device nodes,
as two devices with the same pinctrl will cause pin conflict that makes
the second device fail to probe. Let's move the pinctrl state up to
parent node along with the parent pinctrl to solve this problem.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241004130849.2944-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
on X1E80100.
Working:
* Touchpad
* Keyboard (only post suspend&resume, i2c-hid patch required [1])
* Touchscreen
* eDP (low-res IPS, OLED) with brightness control
* NVME
* USB Type-C ports in USB2/USB3 (one orientation)
* WiFi
* GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
* Lid switch
* Sleep/suspend, nothing visibly broken on resume
Not working:
* Speakers (WIP, pin guessing, x4 WSA8845)
* Microphones (WIP, pin guessing, dual array)
* Fingerprint Reader (WIP, USB MP with ptn3222)
* USB as DP/USB3 (WIP, PS8830 based)
* Camera (Likely OV01A10)
* EC over i2c
Should be working, but cannot be tested due to lack of hw:
* higher res IPS panel
[1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@gmail.com/
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Link: https://lore.kernel.org/r/20241003211139.9296-4-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 2 USB-C ports on x1e78100-t14s are OTG-capable, remove the dr_mode
override to enable OTG.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-3-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 3 USB ports on x1e80100-crd are OTG-capable, remove the dr_mode
override to enable OTG.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-2-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These 3 controllers support OTG and the driver requires the usb-role-switch
property to enable OTG. Add the property to enable OTG by default.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing Broadcast_AND region to the LLCC block for x1e80100,
as the LLCC version on this platform is 4.1 and it provides the region.
This also fixes the following error caused by the missing region:
[ 3.797768] qcom-llcc 25000000.system-cache-controller: error -EINVAL: invalid resource (null)
This error started showing up only after the new regmap region called
Broadcast_AND that has been added to the llcc-qcom driver.
Cc: stable@vger.kernel.org # 6.11: 055afc34fd: soc: qcom: llcc: Add regmap for Broadcast_AND region
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241014-x1e80100-dts-llcc-add-broadcastand_region-v2-1-5ee6ac128627@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
"idle-state-name" is not a valid property for "domain-idle-state"
binding, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241014161631.1527918-2-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A642L (speedbin 0x81) uses index 4, so this commit sets the fourth bit
for A642L supported opps.
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20241014194825.44406-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DWC PCIe controller can be used with its internal MSI controller or
with an external one such as the GICv3 Interrupt Translation Service
(ITS).
Add the msi-map properties needed to use the GIC ITS. This will also
make Linux switch to the ITS implementation, which allows for assigning
affinity to individual MSIs. This specifically allows NVMe and Wi-Fi
interrupts to be processed on all cores (and not just on CPU0).
Note that using the GIC ITS on x1e80100 will cause Advanced Error
Reporting (AER) interrupts to be received on errors unlike when using
the internal MSI controller. Consequently, notifications about
(correctable) errors may now be logged for errors that previously went
unnoticed.
Also note that PCIe5 (and PCIe3) can currently only be used with the
internal MSI controller due to a platform (firmware) limitation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241009161715.14994-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
RB3Gen2 has three tiny buttons located under the blue USB-A ports.
They're all connected through the various PMICs and are used for
volume and power.
Describe them.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-rb3gen2-pwr-vol-keys-v1-1-4b1859c7cc4f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Per the binding, omitting the clock frequency from a Geni I2C controller
node defaults the bus to 100Khz. But at least in Linux, a friendly info
print highlights the lack of explicitly defined frequency in the
DeviceTree.
Specify the frequency, to give it an explicit value, and to silence the
log print in Linux.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-i2c1-frequency-v1-1-77a359015d54@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now as the arm-smmu-qcom driver gained workarounds for the A2NOC and
LPASS SMMU devices, enable those two devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-5-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
L10A, being a fixed regulator, should have min_voltage = max_voltage,
otherwise fixed rulator fails to probe. Fix the max_voltage range to be
equal to minimum.
Fixes: 4edbcf264f ("arm64: dts: qcom: sda660-ifc6560: document missing USB PHY supplies")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-4-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable Adreno GPU on the Inforce IFC6560 SBC. It requires the Zap shader
binary that was provided by the vendor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-3-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now as the arm-smmu-qcom driver gained workarounds for the Adreno SMMU,
it becomes possible to safely enable GPU on the devices. Enable GPU SMMU
and GPU clock controller. GPU should be enabled for target devices that
have ZAP shader blob.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-2-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the ADC and thermal zone for the thermistor next to the
UFS+RAM chip which is connected to GPIO_12 of PM7250B. It is used to
measure the temperature of that area of the PCB.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241002-fp5-ufs-therm-v1-1-1d2d8c1f08b5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.
It enables the support for Wi-Fi, NVMe, the two USB Type-C ports,
Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets
or USB audio), external display via DisplayPort over Type-C (only
the bottom USB Type-C port is working so far), charging, the Surface
Aggregator Module (SAM) to get keyboard and touchpad working with
Surface Type Cover accessories.
Some key features not supported yet:
- built-in display (but software fallback is working with efifb
when blacklisting the msm module)
- built-in display touchscreen
- external display with the top USB Type-C port
- speakers and microphones
- physical volume up and down keys
- LID switch detection
This devicetree is based on the other SC8280XP ones, for the Lenovo
ThinkPad X13s and the Qualcomm CRD.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-6-jerome.debretagne@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-4-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Functional impact checked with comparing before/after DTBs with dtx_diff
and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-3-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB MP controller is wired up to the USB-A port on the left side
and to the Surface Connector on the right side. Configure it.
While at it, remove a stray double \n.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240902-topic-sl7_updates-v1-2-3ee667e6652d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One of the best parts of having a laptop is being able to close the lid
and go on with your day. Enable this feature by defining the lid switch.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240902-topic-sl7_updates-v1-1-3ee667e6652d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC7280, SM7325, and QCM6490 platforms feature an 8-core setup
consisting of:
- 1x Kryo 670 Prime (Cortex-A78) / Kryo 670 Gold Plus (Cortex-A78)
- 3x Kryo 670 Gold (Cortex-A78)
- 4x Kryo 670 Silver (Cortex-A55)
(The CPU cores in the SC7280 are simply called Kryo, but are
nevertheless based on the same Cortex A78 and A55).
Use the correct compatibility.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240818192905.120477-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the TCSR download mode register to enable download mode
control.
This specifically allows the OS to disable download mode in case the
boot firmware has left it enabled to avoid entering the crash dump mode
after a hypervisor reset by default.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241002100122.18809-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing clkref enable and pipediv2 clocks to the PCIe4 and
PCIe6a PHYs.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240916082307.29393-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the venus node on Qualcomm Rb3gen2 so that the
video decoder will start working.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240917-venus_rb3_gen2-v1-1-8fea70733592@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-11-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-10-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-9-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-8-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-7-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-6-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-5-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-4-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-3-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-2-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-1-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-QRD board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-10-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-MTP board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-9-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-HDK board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-8-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling display clock controller for all Qualcomm SM8450
powered board by default there is no more need to set a status property
of dispcc on SM8450-HDK board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450 powered
Sony Xperia phones.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450-QRD board
only.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the description of dispcc device tree node from sm8350.dtsi
there is no need to set a status property value to enable the display clock
controller.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SC7280 and derivative platforms GPU by default requires a signed
binary, a660_zap.mbn. Disable GPU by default and enable it only when
the binary is actually available (QCM6490-IDP, RB3gen2). ChromeOS
devices do not use TrustZone, so GPU can be enabled by default in
sc7280-chrome-common.dtsi. FairPhone5 and SHIFTphone8 DTS already
enable GPU (even though it wasn't required beforehand).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-2-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.
Fixes: ac6d35b9b7 ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-1-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the last
one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to
many new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both
on the consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very
low number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom
and renesas chips.
-----BEGIN PGP SIGNATURE-----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=r07W
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
Commit 22e4e43484 ("arm64: dts: qcom: msm8939: Use mboxes
properties for APCS") broke the boot on msm8939 platforms.
The issue comes from the SMD driver failing to request the mbox
channel because of circular dependencies:
1. rpm -> apcs1_mbox -> rpmcc (RPM_SMD_XO_CLK_SRC) -> rpm.
2. rpm -> apcs1_mbox -> gcc -> rpmcc (RPM_SMD_XO_CLK_SRC) -> rpm
3. rpm -> apcs1_mbox -> apcs2 -> gcc -> rpmcc (RPM_SMD_XO_CLK_SRC) -> rpm
To fix this issue let's switch back to using the deprecated
qcom,ipc property for the RPM node.
Fixes: 22e4e43484 ("arm64: dts: qcom: msm8939: Use mboxes properties for APCS")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20240904-msm8939-rpm-apcs-fix-v1-1-b608e7e48fe1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The actual PHY used by MDSS DP2 is the USB SS2 QMP one. So switch to it
instead. This is needed to get external DP support on boards like CRD
where the 3rd Type-C USB port (right-hand side) is connected to DP2.
Fixes: 1940c25eaa ("arm64: dts: qcom: x1e80100: Add display nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240829-x1e80100-dts-dp2-use-qmpphy-ss2-v1-1-9ba3dca61ccc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All three USB SS combo QMP PHYs need to power off, deinit, then init and
power on again on every plug in event. This is done by forwarding the
orientation from the retimer/mux to the PHY. All is needed is the
orientation-switch property in each such PHY devicetree node. So add
them.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240829-x1e80100-combo-qmpphys-add-orientation-switch-v1-1-5c61ea1794da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for Surface Laptop 7 machines, based on X1E80100.
The feature status is mostly on par with other X Elite machines,
notably lacking:
- USB-A and probably USB-over-Surface-connector (pending NXP retimer
support)
- SD card reader (Realtek RTS5261 connected over PCIe)
- Touchscreen and touchpad support (hid-over-SPI [1])
- Audio (a quick look suggests the setup is very close to the one in
X1E CRD)
The two Surface Laptop 7 SKUs (13.8" and 15") only have very minor
differences, amounting close to none on the software side. Even the
MBN firmware files and ACPI tables are shared between the two machines.
With that in mind, support is added for both, although only the larger
one was physically tested. Display differences will be taken care of
through fused-in EDID and other matters should be solved within the
EC and boot firmware.
[1] https://www.microsoft.com/en-us/download/details.aspx?id=103325
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-5-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GENI SE2 within QUP0 is used as UART on some devices, describe it.
While at it, rewrite the adjacent UART21 pins node to make it more
easily modifiable.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-4-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8150 MTP board does not have magically different GPU than the
SM8150, so it cannot use amd,imageon compatible, also pointed by
dtbs_check:
sm8150-mtp.dtb: gpu@2c00000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,adreno-640.1', 'qcom,adreno', 'amd,imageon'] is too long
'qcom,adreno-640.1' does not match '^qcom,adreno-[0-9a-f]{8}$'
'qcom,adreno-640.1' does not match '^amd,imageon-200\\.[0-1]$'
'amd,imageon' was expected
The incorrect amd,imageon compatible was added in commit f30ac26def
("arm64: dts: qcom: add sm8150 GPU nodes") to the SM8150 and later moved
to the SM8150 MTP board in commit 1642ab96ef ("arm64: dts: qcom:
sm8150: Don't start Adreno in headless mode") with an intention to allow
headless mode. This should be solved via proper driver quirks, not fake
compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821140116.436441-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1E80100 has a multiport controller with 2 HS (eUSB) and 2 SS PHYs
attached to it. It's commonly used for USB-A ports and internally
routed devices. Configure it to support such functionality.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240820-topic-h_mp-v2-2-d88518066372@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The fastrpc driver uses the label to determine the domain ID and create
the device nodes. It should be "cdsp1" as this is the engine we use here.
Fixes: df54dcb34f ("arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes")
Reported-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816102345.16481-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.
Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks. Change USB to use the icc-clk framework for the iface
clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-6-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move lpass codecs va and wsa macros to use the clks directly from
AFE clock controller instead of going via gfm mux like other codec macros
and SoCs.
This makes it more align with the other SoCs and codec macros in this SoC
which take AFE clocks directly. This will also avoid an extra clk mux layer,
provides consistency and avoids the buggy mux driver which will be removed.
This should also fix RB5 audio.
Remove the gfm mux drivers for both audiocc and aoncc.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240815170542.20754-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the LPASS (Q6) SMMU and keep it disabled as this is
used only when the audio DSP is present and used, which is not
mandatory to have.
It is expected for board-specific device-trees to enable this node
if supported.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Link: https://lore.kernel.org/r/20240814-lpass-v1-3-a5bb8f9dfa8b@freebox.fr
[bjorn: s/iface/bus in clock-names, to match binding]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a pshold restart node what can be found in downstream for
enable to perform restart operations.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240807-pshold-v1-1-0fa7927e99ce@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the correct panel compatible, and wire up enable-gpio. It is wired
up in the same way as the x1e80100-crd.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240806202218.9060-1-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the main RGB sensor on the Lenovo x13s a five megapixel 2 lane DPHY
MIPI sensor connected to cisphy0.
With the pm8008 patches recently applied to the x13s dtsi we can now also
enable the RGB sensor. Once done we have all upstream support necessary for
the RGB sensor on x13s.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240806-b4-linux-next-24-07-31-camss-sc8280xp-lenovo-rgb-v2-v3-1-199767fb193d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-6-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3
SM-J320YZ smartphone released in 2016.
Add a device tree for SM-J320YZ with initial support for:
- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5703 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- Touchscreen
- Accelerometer
There are different variants of J3, with some differences in MUIC, sensor,
NFC and touch key I2C buses.
The common parts are shared in msm8916-samsung-j3-common.dtsi to reduce
duplication.
Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Link: https://lore.kernel.org/r/20240804065854.42437-3-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8350 platform the DSI internally is using the refgen regulator. Add
corresponding device node and link it as a supply to the DSI node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-10-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Aside from the MDSS<->MEM interconnect, display devices have separate
interconnect for register access. Add this interconnect to the display
node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-9-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC7180/SM7125 SoCs have a special pin for UFS reset. Generally, this
pin is the same for all devices on the same SoC because it is hardcoded
in the pinctrl driver. Therefore, it might seem appropriate to add this
pin configuration in sc7180.dtsi. However, this pin is defined in the
device-specific DTS files instead of the SoC-level DTS files in all
Qualcomm DTS. To maintain consistency with this approach, we will follow
the same style.
Add reset-gpios to ufs_mem_hc.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240731182412.27966-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CPU and LLCC BWMON nodes and their corresponding opp tables for
SA8775p SoC.
SA8775p has two cpu clusters, with each cluster having a set of
CPU-to-LLCC BWMON registers. Consequently, there are two sets of
CPU-to-LLCC registers.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240730-add_sa8775p_bwmon-v1-2-f4f878da29ae@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The phone has a Silergy SY7802 flash LED controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20240729-sy7802-v6-1-86bb9083e40b@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GPU on X1E80100 requires ZAP 'shader' file to be useful. Since the
file is signed by the OEM keys and might be not available by default,
disable the GPU node and drop the firmware name from the x1e80100.dtsi
file. Devices not being fused to use OEM keys can specify generic
location at `qcom/x1e80100/gen70500_zap.mbn` while enabling the GPU.
The CRD and QCP were lucky enough to work with the default settings, so
reenable the GPU on those platforms and provide correct firmware-name
(including the SoC subdir).
Fixes: 721e38301b ("arm64: dts: qcom: x1e80100: Add gpu support")
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20240715-x1e8-zap-name-v3-1-e7a5258c3c2e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename qdss@88800000 memory region as qlink_logging memory region
and add qdss_mem memory region at address of 0x88500000,
qlink_logging is being added at the memory region at the address
of 0x88800000 as the region is being used by modem firmware.
Since different DSM region size is required for different modem
firmware, split mpss_dsmharq_mem region into 2 separate regions.
This would provide the flexibility to remove the region which is
not required for a particular platform. Based on the modem firmware
either both the regions have to be used or only mpss_dsm_mem has
to be used. Also, reduce the size of mpssadsp_mem region.
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-4-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The multiport USB controller in the SA8295P ADP is connected to four USB
Type-A ports. VBUS for each of these ports are provided by a
TPS2559QWDRCTQ1 regulator, controlled from PMIC GPIOs.
Add the necessary regulators and GPIO configuration to power these.
It seems reasonable that these regulators should be referenced as vbus
supply of usb-a-connector nodes and controlled by e.g. dwc3, but as this
is not supported in Linux today the regulators are left always-on for
now.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240707085624.3411961-1-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.
Without this fix only one speaker in a pair of speakers will function.
After this fix along with WSA codec changes both the speakers starts
working.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240626-port-map-v2-6-6cc1c5608cdd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.
Without this fix only one speaker in a pair of speakers will function.
After this fix along with WSA codec changes both the speakers starts
working.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240626-port-map-v2-5-6cc1c5608cdd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Soundwire controllers (WSA, WSA2, RX, TX) require reset lines to enable
switching clock control from hardware to software.
Add them along with the reset control providers.
Without this reset we might hit fifo under/over run when we try to write to
soundwire device registers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624-x1e-swr-reset-v2-3-8bc677fcfa64@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm SM8650 SoC has three CCI controllers with two I2C busses
connected to each of them.
The CCI controllers on SM8650 are compatible with the ones found on
many other older generations of Qualcomm SoCs.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240612215835.1149199-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm SM8550 SoC contains 3 Camera Control Interface controllers
very similar to the ones found on other Qualcomm SoCs.
One noticeable difference is that cci@ac16000 controller provides only
one I2C bus and has an additional control over AON CCI pins gpio208
and gpio209, but this feature is not yet supported in the CCI driver.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240612215835.1149199-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
No input events are generated from the pressing of the power key on
either Primus or Flex 5G, because the device node isn't enabled.
Give the power key node a label and enable this for the two devices.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20240812-sc8180x-pwrkey-enable-v1-1-2bcc22133774@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the HW model in sm8650-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240709-hci_qca_refactor-v3-6-5f48ca001fed@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.
Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
Link: https://lore.kernel.org/r/20240731111951.6999-1-quic_anshar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add pm8950 resin node as a feature of the PMIC it should be declared
in pm8950.dtsi, disabled by default. Like all other optional components
it can then by enabled and configured in the board-specific device tree
part.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240730-pm8950_resin-v1-1-26de4d933f95@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo Flex 5G has a camera attached to the multiport USB
controller, enable the controller and the four phys to enable this.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-7-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC8180X Primus comes with an AUX card with two USB ports, fed by the
two multiport ports.
Enable the involved nodes and define two always-on regulators to enable
VBUS for these ports.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-6-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC8180X platform comes with a multiport DWC3 controller with two
ports, each connected to a pair of HighSpeed and QMP SuperSpeed PHYs.
Describe these blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-5-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pwr_event interrupt and rearrange the order of the other
interrupts to match the binding.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-4-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC8180X comes with two PMC8180 PMICs, with the GPIO block being used
to control VBUS supply of the second USB multiport port.
Rename the GPIO controller in the first PMC8180 to match the schematics
and define this second controller.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-3-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling
touch screen VDD/VDDIO and keyboard's caps lock LED.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-2-b945527fa5d2@riseup.net
[bjorn: Dropped unnecessary comment in i2c1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
