mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
arm64: dts: qcom: Add SM8550 Xperia 1 V
Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part
of the SoMC SM8550 Yodo platform.
This commit brings support for:
* Remoteprocs (sans modem for now)
* Flash LED (the notification LED is gone :((((()
* SD Card
* USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a replug
with an cable flip sometimes..)
* Most regulators
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)
Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.
To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\
yodo-pdx234.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 2 \
-o boot.img-sony-xperia-pdx234
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img
fastboot flash boot boot.img-sony-xperia-pdx234
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot erase init_boot // ? I don't remember if it's necessary, sorry
fastboot continue
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-7-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Konrad Dybcio
Bjorn Andersson
parent
6e4f7e5399
commit
39c596304e
@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
|
||||
|
||||
779
arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
Normal file
779
arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
Normal file
@ -0,0 +1,779 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023, Linaro Limited
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/firmware/qcom,scm.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/sound/cs35l45.h>
|
||||
#include "sm8550.dtsi"
|
||||
#include "pm8010.dtsi"
|
||||
#include "pm8550.dtsi"
|
||||
#include "pm8550b.dtsi"
|
||||
#define PMK8550VE_SID 5
|
||||
#include "pm8550ve.dtsi"
|
||||
#include "pm8550vs.dtsi"
|
||||
#include "pmk8550.dtsi"
|
||||
/* TODO: Only one SID of PMR735D seems accessible? */
|
||||
|
||||
/delete-node/ &hwfence_shbuf;
|
||||
/delete-node/ &mpss_mem;
|
||||
/delete-node/ &rmtfs_mem;
|
||||
/ {
|
||||
model = "Sony Xperia 1 V";
|
||||
compatible = "sony,pdx234", "qcom,sm8550";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c4 = &i2c4;
|
||||
i2c10 = &i2c10;
|
||||
i2c11 = &i2c11;
|
||||
i2c16 = &i2c_hub_2;
|
||||
serial0 = &uart7;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
label = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-camera-focus {
|
||||
label = "Camera Focus";
|
||||
linux,code = <KEY_CAMERA_FOCUS>;
|
||||
gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
key-camera-snapshot {
|
||||
label = "Camera Snapshot";
|
||||
gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_CAMERA>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
key-volume-down {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
pmic-glink {
|
||||
compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
|
||||
orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
connector@0 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <0>;
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_ss_in: endpoint {
|
||||
remote-endpoint = <&usb_dp_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
mpss_mem: mpss-region@89800000 {
|
||||
reg = <0x0 0x89800000 0x0 0x10800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
splash@b8000000 {
|
||||
reg = <0x0 0xb8000000 0x0 0x2b00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
hwfence_shbuf: hwfence-shbuf-region@e6440000 {
|
||||
reg = <0x0 0xe6440000 0x0 0x2dd000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rmtfs_mem: memory@f8b00000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0x0 0xf8b00000 0x0 0x280000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
|
||||
};
|
||||
|
||||
ramoops@ffd00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xffd00000 0x0 0xc0000>;
|
||||
console-size = <0x40000>;
|
||||
record-size = <0x1000>;
|
||||
pmsg-size = <0x40000>;
|
||||
ecc-size = <16>;
|
||||
};
|
||||
|
||||
rdtag-store-region@ffdc0000 {
|
||||
reg = <0x0 0xffdc0000 0x0 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8550-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
pm8550_bob1: bob1 {
|
||||
regulator-name = "pm8550_bob1";
|
||||
regulator-min-microvolt = <3416000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
|
||||
|
||||
pm8550_l1: ldo1 {
|
||||
regulator-name = "pm8550_l1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l2: ldo2 {
|
||||
regulator-name = "pm8550_l2";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L4 exists in cmd-db, but the board seems to crash on access */
|
||||
|
||||
pm8550_l5: ldo5 {
|
||||
regulator-name = "pm8550_l5";
|
||||
regulator-min-microvolt = <3104000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l6: ldo6 {
|
||||
regulator-name = "pm8550_l6";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l7: ldo7 {
|
||||
regulator-name = "pm8550_l7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l8: ldo8 {
|
||||
regulator-name = "pm8550_l8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l9: ldo9 {
|
||||
regulator-name = "pm8550_l9";
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l10: ldo10 {
|
||||
regulator-name = "pm8550_l10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l11: ldo11 {
|
||||
regulator-name = "pm8550_l11";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1504000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l12: ldo12 {
|
||||
regulator-name = "pm8550_l12";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l13: ldo13 {
|
||||
regulator-name = "pm8550_l13";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l14: ldo14 {
|
||||
regulator-name = "pm8550_l14";
|
||||
regulator-min-microvolt = <3304000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l15: ldo15 {
|
||||
regulator-name = "pm8550_l15";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l16: ldo16 {
|
||||
regulator-name = "pm8550_l16";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550_l17: ldo17 {
|
||||
regulator-name = "pm8550_l17";
|
||||
regulator-min-microvolt = <2504000>;
|
||||
regulator-max-microvolt = <2504000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8550vs-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
pm8550vs_0_l1: ldo1 {
|
||||
regulator-name = "pm8550vs_0_l1";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_0_l3: ldo3 {
|
||||
regulator-name = "pm8550vs_0_l3";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pm8550vs-rpmh-regulators";
|
||||
qcom,pmic-id = "d";
|
||||
|
||||
pm8550vs_1_l1: ldo1 {
|
||||
regulator-name = "pm8550vs_1_l1";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L3 exists in cmd-db, but the board seems to crash on access */
|
||||
};
|
||||
|
||||
regulators-3 {
|
||||
compatible = "qcom,pm8550vs-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
|
||||
pm8550vs_2_s4: smps4 {
|
||||
regulator-name = "pm8550vs_2_s4";
|
||||
regulator-min-microvolt = <904000>;
|
||||
regulator-max-microvolt = <984000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_2_s5: smps5 {
|
||||
regulator-name = "pm8550vs_2_s5";
|
||||
regulator-min-microvolt = <1010000>;
|
||||
regulator-max-microvolt = <1120000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_2_l1: ldo1 {
|
||||
regulator-name = "pm8550vs_2_l1";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_2_l2: ldo2 {
|
||||
regulator-name = "pm8550vs_2_l2";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <968000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_2_l3: ldo3 {
|
||||
regulator-name = "pm8550vs_2_l3";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-4 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
pm8550ve_s4: smps4 {
|
||||
regulator-name = "pm8550ve_s4";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <700000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550ve_l1: ldo1 {
|
||||
regulator-name = "pm8550ve_l1";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550ve_l2: ldo2 {
|
||||
regulator-name = "pm8550ve_l2";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550ve_l3: ldo3 {
|
||||
regulator-name = "pm8550ve_l3";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-5 {
|
||||
compatible = "qcom,pm8550vs-rpmh-regulators";
|
||||
qcom,pmic-id = "g";
|
||||
|
||||
pm8550vs_3_s1: smps1 {
|
||||
regulator-name = "pm8550vs_3_s1";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_s2: smps2 {
|
||||
regulator-name = "pm8550vs_3_s2";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1036000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_s3: smps3 {
|
||||
regulator-name = "pm8550vs_3_s3";
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1004000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_s4: smps4 {
|
||||
regulator-name = "pm8550vs_3_s4";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_s5: smps5 {
|
||||
regulator-name = "pm8550vs_3_s5";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1004000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_s6: smps6 {
|
||||
regulator-name = "pm8550vs_3_s6";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_l1: ldo1 {
|
||||
regulator-name = "pm8550vs_3_l1";
|
||||
regulator-min-microvolt = <1144000>;
|
||||
regulator-max-microvolt = <1256000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_l2: ldo2 {
|
||||
regulator-name = "pm8550vs_3_l2";
|
||||
regulator-min-microvolt = <1104000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
pm8550vs_3_l3: ldo3 {
|
||||
regulator-name = "pm8550vs_3_l3";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c_hub_2 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
pmic@75 {
|
||||
compatible = "dlg,slg51000";
|
||||
reg = <0x75>;
|
||||
dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&cam_pwr_a_cs>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulators {
|
||||
slg51000_a_ldo1: ldo1 {
|
||||
regulator-name = "slg51000_a_ldo1";
|
||||
regulator-min-microvolt = <2400000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo2: ldo2 {
|
||||
regulator-name = "slg51000_a_ldo2";
|
||||
regulator-min-microvolt = <2400000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo3: ldo3 {
|
||||
regulator-name = "slg51000_a_ldo3";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo4: ldo4 {
|
||||
regulator-name = "slg51000_a_ldo4";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo5: ldo5 {
|
||||
regulator-name = "slg51000_a_ldo5";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo6: ldo6 {
|
||||
regulator-name = "slg51000_a_ldo6";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
slg51000_a_ldo7: ldo7 {
|
||||
regulator-name = "slg51000_a_ldo7";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_master_hub_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <1000000>;
|
||||
status = "okay";
|
||||
|
||||
/* NXP NFC @ 28 */
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* LX Semi SW82907 touchscreen @ 28 */
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
clock-frequency = <1000000>;
|
||||
status = "okay";
|
||||
|
||||
/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
clock-frequency = <1000000>;
|
||||
status = "okay";
|
||||
|
||||
cs35l41_l: speaker-amp@30 {
|
||||
compatible = "cirrus,cs35l45";
|
||||
reg = <0x30>;
|
||||
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
|
||||
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
|
||||
#sound-dai-cells = <1>;
|
||||
|
||||
cirrus,gpio-ctrl2 {
|
||||
gpio-ctrl = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
cs35l41_r: speaker-amp@31 {
|
||||
compatible = "cirrus,cs35l45";
|
||||
reg = <0x31>;
|
||||
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
|
||||
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
|
||||
#sound-dai-cells = <1>;
|
||||
|
||||
cirrus,gpio-ctrl2 {
|
||||
gpio-ctrl = <0x2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
||||
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&pcie0_default_state>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0_phy {
|
||||
vdda-phy-supply = <&pm8550vs_2_l1>;
|
||||
vdda-pll-supply = <&pm8550vs_2_l3>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8550_flash {
|
||||
status = "okay";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-sources = <1>, <4>;
|
||||
led-max-microamp = <500000>;
|
||||
flash-max-microamp = <1000000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
function-enumerator = <0>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
led-sources = <2>, <3>;
|
||||
led-max-microamp = <500000>;
|
||||
flash-max-microamp = <1000000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
function-enumerator = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8550_gpios {
|
||||
vol_down_n: volume-down-n-state {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
power-source = <1>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
sdc2_card_det_n: sd-card-det-n-state {
|
||||
pins = "gpio12";
|
||||
function = "normal";
|
||||
power-source = <1>;
|
||||
bias-pull-down;
|
||||
output-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8550b_gpios {
|
||||
snapshot_n: snapshot-n-state {
|
||||
pins = "gpio7";
|
||||
function = "normal";
|
||||
power-source = <1>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
focus_n: focus-n-state {
|
||||
pins = "gpio8";
|
||||
function = "normal";
|
||||
power-source = <1>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8550vs_g_gpios {
|
||||
cam_pwr_a_cs: cam-pwr-a-cs-state {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
power-source = <0x01>;
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8550b_eusb2_repeater {
|
||||
qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
|
||||
qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
|
||||
qcom,tune-usb2-preem = /bits/ 8 <0x7>;
|
||||
vdd18-supply = <&pm8550_l15>;
|
||||
vdd3-supply = <&pm8550_l5>;
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
|
||||
"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
|
||||
"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
|
||||
pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
vmmc-supply = <&pm8550_l9>;
|
||||
vqmmc-supply = <&pm8550_l8>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <32 8>;
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "otg";
|
||||
usb-role-switch;
|
||||
};
|
||||
|
||||
&usb_1_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_dwc3_ss {
|
||||
remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&pm8550vs_2_l1>;
|
||||
vdda12-supply = <&pm8550vs_2_l3>;
|
||||
phys = <&pm8550b_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dp_qmpphy {
|
||||
vdda-phy-supply = <&pm8550vs_2_l3>;
|
||||
vdda-pll-supply = <&pm8550ve_l3>;
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dp_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_ss_in>;
|
||||
};
|
||||
|
||||
&usb_dp_qmpphy_usb_ss_in {
|
||||
remote-endpoint = <&usb_1_dwc3_ss>;
|
||||
};
|
||||
|
||||
&xo_board {
|
||||
clock-frequency = <76800000>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user