mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-03 17:51:23 +00:00
arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345
Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based on X1E80100. Working: * Touchpad * Keyboard (only post suspend&resume, i2c-hid patch required [1]) * Touchscreen * eDP (low-res IPS, OLED) with brightness control * NVME * USB Type-C ports in USB2/USB3 (one orientation) * WiFi * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) * Lid switch * Sleep/suspend, nothing visibly broken on resume Not working: * Speakers (WIP, pin guessing, x4 WSA8845) * Microphones (WIP, pin guessing, dual array) * Fingerprint Reader (WIP, USB MP with ptn3222) * USB as DP/USB3 (WIP, PS8830 based) * Camera (Likely OV01A10) * EC over i2c Should be working, but cannot be tested due to lack of hw: * higher res IPS panel [1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@gmail.com/ Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> Link: https://lore.kernel.org/r/20241003211139.9296-4-alex.vinarskis@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Aleksandrs Vinarskis
Bjorn Andersson
parent
1aa50217d7
commit
f5b788d0e8
@ -272,6 +272,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb
|
||||
|
||||
863
arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
Normal file
863
arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
Normal file
@ -0,0 +1,863 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
* Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
|
||||
#include "x1e80100.dtsi"
|
||||
#include "x1e80100-pmics.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Dell XPS 13 9345";
|
||||
compatible = "dell,xps13-9345", "qcom,x1e80100";
|
||||
chassis-type = "laptop";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart21;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&hall_int_n_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
switch-lid {
|
||||
gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
wakeup-source;
|
||||
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_indicator_en>;
|
||||
|
||||
led-camera-indicator {
|
||||
label = "white:camera-indicator";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
/* Reuse as a panic indicator until we get a "camera on" trigger */
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
pmic-glink {
|
||||
compatible = "qcom,x1e80100-pmic-glink",
|
||||
"qcom,sm8550-pmic-glink",
|
||||
"qcom,pmic-glink";
|
||||
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
|
||||
<&tlmm 123 GPIO_ACTIVE_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Right-side USB Type-C port */
|
||||
connector@0 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <0>;
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_ss0_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_ss0_ss_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Left-side USB Type-C port */
|
||||
connector@1 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <1>;
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_ss1_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_ss1_ss_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
size = <0x0 0x8000000>;
|
||||
reusable;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
vreg_edp_3p3: regulator-edp-3p3 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "VREG_EDP_3P3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&edp_reg_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_nvme: regulator-nvme {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "VREG_NVME_3P3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&nvme_reg_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vreg_vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8550-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
vdd-bob1-supply = <&vreg_vph_pwr>;
|
||||
vdd-bob2-supply = <&vreg_vph_pwr>;
|
||||
vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l2-l13-l14-supply = <&vreg_bob1>;
|
||||
vdd-l5-l16-supply = <&vreg_bob1>;
|
||||
vdd-l6-l7-supply = <&vreg_bob2>;
|
||||
vdd-l8-l9-supply = <&vreg_bob1>;
|
||||
vdd-l12-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l15-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l17-supply = <&vreg_bob2>;
|
||||
|
||||
vreg_bob1: bob1 {
|
||||
regulator-name = "vreg_bob1";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob2: bob2 {
|
||||
regulator-name = "vreg_bob2";
|
||||
regulator-min-microvolt = <2504000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2b_3p0: ldo2 {
|
||||
regulator-name = "vreg_l2b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4b_1p8: ldo4 {
|
||||
regulator-name = "vreg_l4b_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6b_1p8: ldo6 {
|
||||
regulator-name = "vreg_l6b_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8b_3p0: ldo8 {
|
||||
regulator-name = "vreg_l8b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9b_2p9: ldo9 {
|
||||
regulator-name = "vreg_l9b_2p9";
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12b_1p2: ldo12 {
|
||||
regulator-name = "vreg_l12b_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13b_3p0: ldo13 {
|
||||
regulator-name = "vreg_l13b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14b_3p0: ldo14 {
|
||||
regulator-name = "vreg_l14b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15b_1p8: ldo15 {
|
||||
regulator-name = "vreg_l15b_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17b_2p5: ldo17 {
|
||||
regulator-name = "vreg_l17b_2p5";
|
||||
regulator-min-microvolt = <2504000>;
|
||||
regulator-max-microvolt = <2504000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
vdd-l1-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
|
||||
vreg_s4c_1p8: smps4 {
|
||||
regulator-name = "vreg_s4c_1p8";
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1c_1p2: ldo1 {
|
||||
regulator-name = "vreg_l1c_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2c_0p8: ldo2 {
|
||||
regulator-name = "vreg_l2c_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3c_0p9: ldo3 {
|
||||
regulator-name = "vreg_l3c_0p9";
|
||||
regulator-min-microvolt = <920000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "d";
|
||||
vdd-l1-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s4c_1p8>;
|
||||
vdd-s1-supply = <&vreg_vph_pwr>;
|
||||
|
||||
vreg_l1d_0p8: ldo1 {
|
||||
regulator-name = "vreg_l1d_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2d_0p9: ldo2 {
|
||||
regulator-name = "vreg_l2d_0p9";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3d_1p8: ldo3 {
|
||||
regulator-name = "vreg_l3d_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-3 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s5j_1p2>;
|
||||
|
||||
vreg_l2e_0p8: ldo2 {
|
||||
regulator-name = "vreg_l2e_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3e_1p2: ldo3 {
|
||||
regulator-name = "vreg_l3e_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-4 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
vdd-l1-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s5j_1p2>;
|
||||
vdd-s1-supply = <&vreg_vph_pwr>;
|
||||
|
||||
vreg_s1f_0p7: smps1 {
|
||||
regulator-name = "vreg_s1f_0p7";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-6 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "i";
|
||||
vdd-l1-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s1-supply = <&vreg_vph_pwr>;
|
||||
vdd-s2-supply = <&vreg_vph_pwr>;
|
||||
|
||||
vreg_s1i_0p9: smps1 {
|
||||
regulator-name = "vreg_s1i_0p9";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s2i_1p0: smps2 {
|
||||
regulator-name = "vreg_s2i_1p0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1i_1p8: ldo1 {
|
||||
regulator-name = "vreg_l1i_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2i_1p2: ldo2 {
|
||||
regulator-name = "vreg_l2i_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3i_0p8: ldo3 {
|
||||
regulator-name = "vreg_l3i_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-7 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "j";
|
||||
vdd-l1-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s5-supply = <&vreg_vph_pwr>;
|
||||
|
||||
vreg_s5j_1p2: smps5 {
|
||||
regulator-name = "vreg_s5j_1p2";
|
||||
regulator-min-microvolt = <1256000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1j_0p9: ldo1 {
|
||||
regulator-name = "vreg_l1j_0p9";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2j_1p2: ldo2 {
|
||||
regulator-name = "vreg_l2j_1p2";
|
||||
regulator-min-microvolt = <1256000>;
|
||||
regulator-max-microvolt = <1256000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3j_0p8: ldo3 {
|
||||
regulator-name = "vreg_l3j_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
keyboard@5 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x5>;
|
||||
|
||||
hid-descr-addr = <0x20>;
|
||||
interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&kybd_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
status = "disabled";
|
||||
/* PS8830 Retimer @0x8 */
|
||||
/* Unknown device @0x9 */
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
/* EC @0x3b */
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <400000>;
|
||||
status = "disabled";
|
||||
/* PS8830 Retimer @0x8 */
|
||||
/* Unknown device @0x9 */
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchscreen@10 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x10>;
|
||||
|
||||
hid-descr-addr = <0x1>;
|
||||
interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&ts0_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
clock-frequency = <400000>;
|
||||
status = "disabled";
|
||||
/* USB3 retimer device @0x4f */
|
||||
};
|
||||
|
||||
&i2c17 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
|
||||
hid-descr-addr = <0x20>;
|
||||
interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&tpad_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dp3 {
|
||||
/delete-property/ #sound-dai-cells;
|
||||
|
||||
status = "okay";
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
/* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */
|
||||
compatible = "edp-panel";
|
||||
power-supply = <&vreg_edp_3p3>;
|
||||
|
||||
port {
|
||||
edp_panel_in: endpoint {
|
||||
remote-endpoint = <&mdss_dp3_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
mdss_dp3_out: endpoint {
|
||||
data-lanes = <0 1 2 3>;
|
||||
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
|
||||
|
||||
remote-endpoint = <&edp_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss_dp3_phy {
|
||||
vdda-phy-supply = <&vreg_l3j_0p8>;
|
||||
vdda-pll-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4 {
|
||||
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&pcie4_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4_phy {
|
||||
vdda-phy-supply = <&vreg_l3i_0p8>;
|
||||
vdda-pll-supply = <&vreg_l3e_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie6a {
|
||||
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vddpe-3v3-supply = <&vreg_nvme>;
|
||||
|
||||
pinctrl-0 = <&pcie6a_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie6a_phy {
|
||||
vdda-phy-supply = <&vreg_l1d_0p8>;
|
||||
vdda-pll-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
firmware-name = "qcom/x1e80100/dell/xps13-9345/qcadsp8380.mbn",
|
||||
"qcom/x1e80100/dell/xps13-9345/adsp_dtbs.elf";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
firmware-name = "qcom/x1e80100/dell/xps13-9345/qccdsp8380.mbn",
|
||||
"qcom/x1e80100/dell/xps13-9345/cdsp_dtbs.elf";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&smb2360_0_eusb2_repeater {
|
||||
vdd18-supply = <&vreg_l3d_1p8>;
|
||||
vdd3-supply = <&vreg_l2b_3p0>;
|
||||
};
|
||||
|
||||
&smb2360_1_eusb2_repeater {
|
||||
vdd18-supply = <&vreg_l3d_1p8>;
|
||||
vdd3-supply = <&vreg_l14b_3p0>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */
|
||||
<76 4>, /* SPI19 (TZ Protected) */
|
||||
<238 1>; /* UFS Reset */
|
||||
|
||||
cam_indicator_en: cam-indicator-en-state {
|
||||
pins = "gpio110";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
edp_reg_en: edp-reg-en-state {
|
||||
pins = "gpio70";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
hall_int_n_default: hall-int-n-state {
|
||||
pins = "gpio92";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
kybd_default: kybd-default-state {
|
||||
pins = "gpio67";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nvme_reg_en: nvme-reg-en-state {
|
||||
pins = "gpio18";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie4_default: pcie4-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio147";
|
||||
function = "pcie4_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
perst-n-pins {
|
||||
pins = "gpio146";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio148";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
pcie6a_default: pcie6a-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio153";
|
||||
function = "pcie6a_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
perst-n-pins {
|
||||
pins = "gpio152";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio154";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
tpad_default: tpad-default-state {
|
||||
disable-pins {
|
||||
pins = "gpio38";
|
||||
function = "gpio";
|
||||
output-high;
|
||||
};
|
||||
|
||||
int-n-pins {
|
||||
pins = "gpio3";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio52";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ts0_default: ts0-default-state {
|
||||
disable-pins {
|
||||
pins = "gpio75";
|
||||
function = "gpio";
|
||||
output-high;
|
||||
};
|
||||
|
||||
int-n-pins {
|
||||
pins = "gpio51";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
/* Technically should be High-Z input */
|
||||
pins = "gpio48";
|
||||
function = "gpio";
|
||||
output-low;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart21 {
|
||||
compatible = "qcom,geni-debug-uart";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0_hsphy {
|
||||
vdd-supply = <&vreg_l3j_0p8>;
|
||||
vdda12-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
phys = <&smb2360_0_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3e_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1j_0p9>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_ss0_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_ss0_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss0_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_ss0_ss_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss1_hsphy {
|
||||
vdd-supply = <&vreg_l3j_0p8>;
|
||||
vdda12-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
phys = <&smb2360_1_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3e_1p2>;
|
||||
vdda-pll-supply = <&vreg_l2d_0p9>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_ss1_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_ss1_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss1_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_ss1_ss_in>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user