Config for -
1. Preventing fragmentation via user configured EAD RTs
2. Limiting the number of EVIs per-fragment if EAD fragmentation is needed
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
*BSD has some special struggles associated with the graceful
restart code in zebra. Add a bit of documentation to outline
this problem and how it is solved.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem Statement:
=================
This commit is to add document support for OSPF6 authentication
trailer feature, which is adding support for RFC7166.
RCA:
====
NA
Fix:
====
To add detailed description for feature support.
This document caputres
Configuration CLI
Show commands
Debug commands
Clear command
That are added as part of the feature with examples.
Risk:
=====
Low
Tests Executed:
===============
NA
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
`show ip pim assert` shows S,G ifchannel information even when
there is no information available about the assert process.
Fix the code to not dump non-interesting cases.
Fixes: 10462
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While going through the doc, found some commands are missing in the doc.
Also correcting few mistakes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
New Constaint Shortest Path First algorithm has been introduce in FRR library.
Add a new 'show sharp cspf' command as example of how to use these
CSPF algorithm.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Here "new" is very puzzling. If new parameters with default values on peer
configuration node are set, they will not be used yet.
So just clarify it:
Only "non-default" values on peer configuration node are set, they can override
the conrresponding values from profile.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Instead of referring to the draft of IP Prefix Advertisement in
Ethernet VPN let's point to the recently published RFC9136.
Signed-off-by: Marlin Cremers <marlin@cbws.nl>
On lower CPU with lots of static routes, it will cost more than 2
minutes.
2 minutes is the default timeout value, we can adjust it by configure:
./configure --with-service-timeout=<digit>
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Using with LLGR, this should be allowed setting GR restart-time timer to 0,
to immediately start LLGR timers.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
rfc7196 recommends:
In addition, BGP implementations have an internal constant, which we
will call the 'maximum penalty', and the current computed penalty may
not exceed it.
Router Maximum Penalty: The internal constant for the maximum
penalty value MUST be raised to at least 50,000.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The following subcodes are defined for the Cease NOTIFICATION
message:
Subcode Symbolic Name
1 Maximum Number of Prefixes Reached
2 Administrative Shutdown
3 Peer De-configured
4 Administrative Reset
5 Connection Rejected
6 Other Configuration Change
7 Connection Collision Resolution
8 Out of Resources
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Updating babel default configuration parameters rtt-min and
max-rtt-penalty according to the actual implementation.
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem:
=======
Generate query once cli is generating IGMPv2 report for IGMPv3 enabled interface
Description:
===========
If the version is not specified in the cli, it was taking version 2 as default
Fix:
===
If the version is not specified in the cli along with ip igmp generate-query-once,
the default will be the version enabled on that interface.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
Add Link State TED features to isis_te.c and new CLI to export LS TED and
show LS TED to IS-IS.
IS-IS LSPs are parse each time a new LSP event occurs in order to update
accordingly the Link State Traffic Engineering Database. LS TED could be
exported through the ZAPI Opaque message (see sharpd as example).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The `neighbor <peer> version <X>` command does not
exist. I am unable to find it going back to version
2.0 of FRR. So this command has been not in the system
for a very long time.
In any event bgp already supports version 4 of bgp and
it auto-negotiates this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability to specify the router-id/area-id when deleting the debug
ospf6 configuration.
The new commands are as follow:
no debug ospf6 border-routers router-id [A.B.C.D]
no debug ospf6 border-routers area-id [A.B.C.D]
Update the doc as well.
Signed-off-by: Ahmad Caracalli <ahmad.caracalli@6wind.com>
Implement NSSA address ranges as specified by RFC 3101:
NSSA border routers may be configured with Type-7 address ranges.
Each Type-7 address range is defined as an [address,mask] pair. Many
separate Type-7 networks may fall into a single Type-7 address range,
just as a subnetted network is composed of many separate subnets.
NSSA border routers may aggregate Type-7 routes by advertising a
single Type-5 LSA for each Type-7 address range. The Type-5 LSA
resulting from a Type-7 address range match will be distributed to
all Type-5 capable areas.
Syntax:
area A.B.C.D nssa range X:X::X:X/M [<not-advertise|cost (0-16777215)>]
Example:
router ospf6
ospf6 router-id 1.1.1.1
area 1 nssa
area 1 nssa range 2001:db8:1000::/64
area 1 nssa range 2001:db8:2000::/64
!
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Extend the pathd documentation with more configuration examples, more
detailed and some graphics to help understand what pathd supports.
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Start a deprecation cycle of one year before removing the original
command
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Because vrf backend may be based on namespaces, each vrf can
use in the [16-(2^32-1)] range table identifier for daemons that
request it. Extend the table manager to be hosted by vrf.
That possibility is disabled in the case the vrf backend is vrflite.
In that case, all vrf context use the same table manager instance.
Add a configuration command to be able to configure the wished
range of tables to use. This is a solution that permits to give
chunks to bgp daemon when it works with bgp flowspec entries and
wants to use specific iptables that do not override vrf tables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Issue #9535 describes how the export-list/import-list commands work
differently on ospfd and ospf6d.
In short:
* On ospfd, "area A.B.C.D export-list" filters which internal
routes an ABR exports to other areas. On ospf6d, instead, that
command filters which inter-area routes an ABR exports to the
configured area (which is quite counter-intuitive). In other words,
both commands do the same but in opposite directions.
* On ospfd, "area A.B.C.D import-list" filters which inter-area
routes an ABR imports into the configured area. On ospf6d, that
command filters which inter-area routes an interior router accepts.
* On both daemons, "area A.B.C.D filter-list prefix NAME <in|out>"
works exactly the same as import/export lists, but using prefix-lists
instead of ACLs.
The inconsistency on how those commands work is undesirable. This
PR proposes to adapt the ospf6d commands to behave like they do
in ospfd.
These changes are obviously backward incompatible and this PR doesn't
propose any mitigation strategy other than warning users about the
changes in the next release notes. Since these ospf6d commands are
undocumented and work in such a peculiar way, it's unlikely many
users will be affected (if any at all).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Added references to some other sysctl knobs that influence behavior
significant to routers, e.g. arp_accept, arp_ignore, bc_forwarding.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Received user feedback that it was unclear how to get into the FRR
shell. Adding a snippet to the basic setup page to help clarify.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Currently the source IP parameter must be entered between destination IP
and destination port parameters. This is not obviously understandable
when you read such config so let's move the source parameter to the end
of the command line, after the whole list of destination parameters. We
can do this without any deprecation cycle as the parameter was introduced
just recently and isn't in any public release yet.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add a knob to turn a NSSA area into a totally stub area. In this
configuration a Type-3 default summary route is generated by default.
Syntax: `area A.B.C.D nssa no-summary`.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the ability to configure the source address of rpki
connection. Proposed vty command is to add below parameter:
rpki cache <address> source <bindaddr> <port> preference <pref>
rpki cache <address> source <bindaddr> <port> <usernamessh> ...
This works for both tcp and ssh connections. In case the source
address is not available yet, the rpki retry interval will retry
in a defined amount of time.
Rtrlib library is the library in charge of the binding of the
tcp/ssh connection, and applies the getaddrinfo() and bind()
operations to the passed parameter bindaddr to the respective
tcp_config/ssh_config structures.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the "metric" and "metric-type" options to the "redistribute"
command.
This is a small commit since the logic of setting the metric
value and type of external routes was already present due to the
implementation of the "default-information originate" command months
ago. This commit merely extends the "redistribute" command to
leverage that functionality.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Currently the NSSA support is a separate section, but it should actually
be a description of the corresponding CLI command.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently the debugging section is placed in the middle of the section
with various configuration commands.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
1. This check is absolutely useless. Nothing keeps user from deleting
the address right after this check.
2. This check prevents zebra from correctly reading the user config with
"set src" because of a race with interface startup (see #4249).
3. NO OPERATIONAL DATA USAGE ON VALIDATION STAGE.
Fixes#7319.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Replaces next-hop-self keyword "all" with "force" to match the CLI.
Also mentions third-party next-hops will be bypassed by next-hop-self.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Adds a knob that sets the time between loc-rib scans for conditional
advertisement.
I chose the range (5-240) because 1 second seems dumb and too easy to
hurt yourself at even moderate scale, 5 seconds you can still hurt
yourself but I could see a use case for it, and 4 minutes should be
enough for anyone (tm)
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
While we do have `show ip prefix-list NAME A.B.C.D/M`, that doesn't
actually run the prefix list matching code. While the result would
hopefully be the same anyway, let's have a way to call the actual prefix
list match code and get a result.
(As an aside, this might be useful for scripting to do a quick "is this
prefix in that prefix list" check.)
Signed-off-by: David Lamparter <equinox@diac24.net>
RFC 3623 specifies the Graceful Restart enhancement to the OSPF
routing protocol. This PR implements support for the restarting mode,
whereas the helper mode was implemented by #6811.
This work is based on #6782, which implemented the pre-restart part
and settled the foundations for the post-restart part (behavioral
changes, GR exit conditions, and on-exit actions).
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ospf`
EXEC-level command needs to be issued before restarting the ospfd
daemon (there's no specific requirement on how the daemon should
be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospfd is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
domainname is a merge conflict: it is duplicated, so delete it.
bgp content is a compille warning and wrongly display, so fix it.
Signed-off-by: anlancs <anlan_cs@tom.com>
Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
`log-filter WORD` was giving me a serious headache since it also matches
`log WORD` due to the way the CLI token handling works. This meant that
a mistyped `log something` command would silently be interpreted as a
filter string, causing me serious headscratching and WTFs until I
figured what was going on.
Remove this UX pitfall so noone else falls into it. (Since the command
was never saved to config, renaming it shouldn't cause trouble.)
[Also I apparently forgot to update the docs when I transferred this
over to the new zlog bits...]
TODO for a rainy day: since we collect all the CLI commands anyway, we
should warn somewhere for "2nd level ambiguous" commands like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
These names are saved in current vtysh's memory, can't and needn't be saved into
configure file by watchfrr's 'vtysh -w`.
Signed-off-by: anlancs <anlan_cs@tom.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
similarly to what was done for IS-IS in commit 01d43141, combine
the SRGB and SRLB commands for OSPF-SR, so that we can replace
overlapping ranges in one sweep change.
Also allow the range configuration to be stored before SR is enabled.
There is no reason why we should not - in fact that constraint meant
that we were always requesting the default label ranges regardless
of what we actually wanted to use.
Finally, update the topotests now that we do not need to refresh
the SRGB/SRLB/MSD after disabling SR. Note that the prefix-sid still
needs to be re-added.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Modify VRF/view display in show bgp summary:
- to be more concise
- to display on which VRF/view no neighbor was found
Before patch:
ubuntu# show bgp vrf all summary
Instance default:
IPv4 Unicast Summary:
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary:
Instance private:
IPv4 Unicast Summary:
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found
% No BGP neighbors found
After patch:
ubuntu# show bgp vrf all summary
IPv4 Unicast Summary (VRF default):
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary (VRF default):
(...)
IPv4 Unicast Summary (VRF private):
(...)
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found in VRF default
% No BGP neighbors found in VRF private
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
"ip nht resolve-via-default" is currently placed in "Link Parameters
Commands" section. Add a separate section and missing IPv6 counterpart.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add ability to filter session on show bgp summary by neighbor or
remote AS:
ubuntu# show bgp summary ?
neighbor Show only the specified neighbor session
remote-as Show only the specified remote AS session
ubuntu# show bgp summary neighbor ?
A.B.C.D Neighbor to display information about
WORD Neighbor on BGP configured interface
X:X::X:X Neighbor to display information about
ubuntu# show bgp summary remote-as ?
(1-4294967295) AS number
external External (eBGP) AS sessions
internal Internal (iBGP) AS sessions
This patch includes the documentation and the topotest.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
- As an example of pathd and igp (ospfd) config:
! igp ospfv2 snippet
interface eth0
ip ospf network point-to-point
!
router ospf$
mpls-te on
mpls-te export
...
!pathd snippet
segment-routing
traffic-eng
mpls-te on
mpls-te import ospfv2
segment-list sl-1
index 10 nai adjacency 10.1.2.11 10.1.2.1
index 20 nai adjacency 10.1.20.1 10.1.20.2
index 30 nai adjacency 10.2.5.2 10.2.5.5
!
policy color 5 endpoint 10.10.10.5
name five
binding-sid 5555
candidate-path preference 600 name cp51 explicit segment-list sl-1
candidate-path preference 500 name cp52-dyn dynamic
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
Description:
Added a new show command("show ip zebra route dump") to dump all routes
with detailed information including nexthops,flags, status ..etc.
This helps for dubugging and added to support_bundle_command.conf.
Defined this command as a hidden command.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Currently we have a "route-map optimization" command which is entered
from inside the route-map entry but actually applies to the whole
route-map. In addition, this command is not shown in the running-config
and not stored to the startup-config during "write".
Let's add a new command on the config node level to control this setting
and show it in the running-config to make possible to save it during
"write".
The old command is saved for the backward compatibility but hidden and
marked as deprecated.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
increase the maximum number of neighbors in a bgp group.
Set the maximum value to 50000 instead of 5000.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add docs for commands to display BGP table per-RD.
Also update commands to mention flowspec, routes,
advertised-routes, and received-routes.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Description:
OSPF does not have an option to control the maximum multiple
equal cost paths to reach a destination/route(ECMP).
Currently, it is using the system specific max multiple paths.
But Somtimes, It requires to control the multiple paths from ospf.
This cli helps to configure the max number multiple paths in ospf.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Before the transition of prefix-lists to northbound, this setting
controlled whether sequence numbers were displayed in the config.
After the transition, sequence numbers are always displayed in the
configuration, and this command only controls the output of the show
commands, which is not very useful. This command is not even shown in
the config anymore.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
