mirror of
https://git.proxmox.com/git/mirror_frr
synced 2025-04-28 13:20:12 +00:00
*: remove *.conf.sample files
Most of these are many, many years out of date. All of them vary randomly in quality. They show up by default in packages where they aren't really useful now that we use integrated config. Remove them. The useful ones have been moved to the docs. Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This commit is contained in:
Quentin Young
parent
ed0c871ecf
commit
b832909b42
1
babeld/.gitignore
vendored
1
babeld/.gitignore
vendored
@ -4,5 +4,4 @@
|
||||
!LICENCE
|
||||
!Makefile
|
||||
!subdir.am
|
||||
!babeld.conf.sample
|
||||
!.gitignore
|
||||
|
||||
@ -1,30 +0,0 @@
|
||||
debug babel common
|
||||
!debug babel kernel
|
||||
!debug babel filter
|
||||
!debug babel timeout
|
||||
!debug babel interface
|
||||
!debug babel route
|
||||
!debug babel all
|
||||
|
||||
router babel
|
||||
! network wlan0
|
||||
! network eth0
|
||||
! redistribute ipv4 kernel
|
||||
! no redistribute ipv6 static
|
||||
|
||||
! The defaults are fine for a wireless interface
|
||||
|
||||
!interface wlan0
|
||||
|
||||
! A few optimisation tweaks are optional but recommended on a wired interface
|
||||
! Disable link quality estimation, enable split horizon processing, and
|
||||
! increase the hello and update intervals.
|
||||
|
||||
!interface eth0
|
||||
! babel wired
|
||||
! babel split-horizon
|
||||
! babel hello-interval 12000
|
||||
! babel update-interval 36000
|
||||
|
||||
! log file /var/log/quagga/babeld.log
|
||||
log stdout
|
||||
@ -5,7 +5,6 @@
|
||||
if BABELD
|
||||
noinst_LIBRARIES += babeld/libbabel.a
|
||||
sbin_PROGRAMS += babeld/babeld
|
||||
dist_examples_DATA += babeld/babeld.conf.sample
|
||||
vtysh_scan += \
|
||||
babeld/babel_interface.c \
|
||||
babeld/babel_zebra.c \
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
password zebra
|
||||
!
|
||||
log stdout
|
||||
!
|
||||
line vty
|
||||
@ -5,7 +5,6 @@
|
||||
if BFDD
|
||||
noinst_LIBRARIES += bfdd/libbfd.a
|
||||
sbin_PROGRAMS += bfdd/bfdd
|
||||
dist_examples_DATA += bfdd/bfdd.conf.sample
|
||||
vtysh_scan += bfdd/bfdd_vty.c
|
||||
vtysh_scan += bfdd/bfdd_cli.c
|
||||
vtysh_daemons += bfdd
|
||||
|
||||
@ -1,31 +0,0 @@
|
||||
! -*- bgp -*-
|
||||
!
|
||||
! BGPd sample configuration file
|
||||
!
|
||||
! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
|
||||
!
|
||||
hostname bgpd
|
||||
password zebra
|
||||
!enable password please-set-at-here
|
||||
!
|
||||
!
|
||||
router bgp 7675
|
||||
! bgp router-id 10.0.0.1
|
||||
! network 10.0.0.0/8
|
||||
! neighbor 10.0.0.2 remote-as 7675
|
||||
! neighbor 10.0.0.2 ebgp-multihop
|
||||
!
|
||||
! address-family ipv4 unicast
|
||||
! neighbor 10.0.0.2 route-map set-nexthop out
|
||||
! neighbor 10.0.0.2 next-hop-self
|
||||
! exit-address-family
|
||||
!
|
||||
! access-list all permit any
|
||||
!
|
||||
!route-map set-nexthop permit 10
|
||||
! match ip address all
|
||||
! set ip next-hop 10.0.0.1
|
||||
!
|
||||
!log file bgpd.log
|
||||
!
|
||||
log stdout
|
||||
@ -1,91 +0,0 @@
|
||||
hostname H192.1.1.1
|
||||
password zebra
|
||||
#enable password zebra
|
||||
log stdout notifications
|
||||
log monitor notifications
|
||||
#debug bgp
|
||||
|
||||
line vty
|
||||
exec-timeout 1000
|
||||
exit
|
||||
|
||||
|
||||
router bgp 64512
|
||||
|
||||
# Must set a router-id if no zebra (default 0.0.0.0)
|
||||
bgp router-id 192.1.1.1
|
||||
|
||||
neighbor 192.1.1.2 remote-as 64512
|
||||
neighbor 192.1.1.2 description H192.1.1.2
|
||||
neighbor 192.1.1.2 update-source 192.1.1.1
|
||||
neighbor 192.1.1.2 advertisement-interval 1
|
||||
|
||||
neighbor 192.1.1.3 remote-as 64512
|
||||
neighbor 192.1.1.3 description H192.1.1.3
|
||||
neighbor 192.1.1.3 update-source 192.1.1.1
|
||||
neighbor 192.1.1.3 advertisement-interval 1
|
||||
|
||||
address-family ipv4 unicast
|
||||
no neighbor 192.1.1.2 activate
|
||||
no neighbor 192.1.1.3 activate
|
||||
|
||||
address-family vpnv4
|
||||
neighbor 192.1.1.2 activate
|
||||
neighbor 192.1.1.3 activate
|
||||
exit-address-family
|
||||
|
||||
address-family vpnv6
|
||||
neighbor 192.1.1.2 activate
|
||||
neighbor 192.1.1.3 activate
|
||||
exit-address-family
|
||||
|
||||
vnc defaults
|
||||
rd auto:vn:5226
|
||||
response-lifetime 45
|
||||
rt both 1000:1 1000:2
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group group1
|
||||
prefix vn 172.16.0.0/16
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group red
|
||||
prefix vn 10.0.0.0/8
|
||||
rd auto:vn:10
|
||||
rt both 1000:10
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group blue
|
||||
prefix vn 20.0.0.0/8
|
||||
rd auto:vn:20
|
||||
rt both 1000:20
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group green
|
||||
prefix vn 30.0.0.0/8
|
||||
rd auto:vn:20
|
||||
rt both 1000:30
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group rfc4291v6c
|
||||
prefix vn ::ac10:0/112
|
||||
rd auto:vn:5227
|
||||
rt both 2000:1
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group rfc4291v6m
|
||||
prefix vn ::ffff:ac10:0/112
|
||||
rd auto:vn:5528
|
||||
rt both 3000:1
|
||||
exit-vnc
|
||||
|
||||
vnc nve-group rfc6052v6
|
||||
prefix vn 64:ff9b::ac10:0/112
|
||||
rd auto:vn:5529
|
||||
rt both 4000:1
|
||||
exit-vnc
|
||||
|
||||
exit
|
||||
|
||||
|
||||
|
||||
@ -6,11 +6,6 @@ if BGPD
|
||||
noinst_LIBRARIES += bgpd/libbgp.a
|
||||
sbin_PROGRAMS += bgpd/bgpd
|
||||
noinst_PROGRAMS += bgpd/bgp_btoa
|
||||
dist_examples_DATA += \
|
||||
bgpd/bgpd.conf.sample \
|
||||
bgpd/bgpd.conf.sample2 \
|
||||
bgpd/bgpd.conf.vnc.sample \
|
||||
# end
|
||||
vtysh_scan += \
|
||||
bgpd/bgp_bfd.c \
|
||||
bgpd/bgp_debug.c \
|
||||
|
||||
1
debian/frr.dirs
vendored
1
debian/frr.dirs
vendored
@ -2,7 +2,6 @@ etc/frr/
|
||||
etc/iproute2/rt_protos.d/
|
||||
etc/logrotate.d/
|
||||
usr/share/doc/frr/
|
||||
usr/share/doc/frr/examples/
|
||||
usr/share/lintian/overrides/
|
||||
usr/share/yang/
|
||||
var/log/frr/
|
||||
|
||||
1
debian/frr.install
vendored
1
debian/frr.install
vendored
@ -16,6 +16,5 @@ usr/lib/frr/*.sh
|
||||
usr/lib/frr/*d
|
||||
usr/lib/frr/watchfrr
|
||||
usr/lib/frr/zebra
|
||||
usr/share/doc/frr/examples
|
||||
usr/share/man/
|
||||
usr/share/yang/
|
||||
|
||||
3
debian/rules
vendored
3
debian/rules
vendored
@ -43,7 +43,6 @@ export PYTHON=python3
|
||||
override_dh_auto_configure:
|
||||
$(shell dpkg-buildflags --export=sh); \
|
||||
dh_auto_configure -- \
|
||||
--enable-exampledir=/usr/share/doc/frr/examples/ \
|
||||
--localstatedir=/var/run/frr \
|
||||
--sbindir=/usr/lib/frr \
|
||||
--sysconfdir=/etc/frr \
|
||||
@ -92,8 +91,6 @@ endif
|
||||
cp -r tools/etc/* debian/tmp/etc/
|
||||
-rm debian/tmp/etc/frr/daemons.conf
|
||||
|
||||
sed -e 's#^!log file #!log file /var/log/frr/#' -i debian/tmp/usr/share/doc/frr/examples/*sample*
|
||||
|
||||
# drop dev-only files
|
||||
find debian/tmp -name '*.la' -o -name '*.a' -o -name 'lib*.so' | xargs rm -f
|
||||
rm -rf debian/tmp/usr/include
|
||||
|
||||
@ -85,8 +85,6 @@ startup. To configure by hand:
|
||||
|
||||
docker exec -it frr /bin/sh
|
||||
vi /etc/frr/daemons
|
||||
cp /etc/frr/zebra.conf.sample /etc/frr/zebra.conf
|
||||
vi /etc/frr/zebra.conf
|
||||
/etc/init.d/frr start
|
||||
|
||||
Or, to configure the daemons using /etc/frr from a host volume, put the
|
||||
|
||||
@ -233,3 +233,41 @@ Babel debugging commands
|
||||
.. note::
|
||||
If you have compiled with the ``NO_DEBUG`` flag, then these commands aren't
|
||||
available.
|
||||
|
||||
|
||||
Babel sample configuration file
|
||||
===============================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
debug babel common
|
||||
!debug babel kernel
|
||||
!debug babel filter
|
||||
!debug babel timeout
|
||||
!debug babel interface
|
||||
!debug babel route
|
||||
!debug babel all
|
||||
|
||||
router babel
|
||||
! network wlan0
|
||||
! network eth0
|
||||
! redistribute ipv4 kernel
|
||||
! no redistribute ipv6 static
|
||||
|
||||
! The defaults are fine for a wireless interface
|
||||
|
||||
!interface wlan0
|
||||
|
||||
! A few optimisation tweaks are optional but recommended on a wired interface
|
||||
! Disable link quality estimation, enable split horizon processing, and
|
||||
! increase the hello and update intervals.
|
||||
|
||||
!interface eth0
|
||||
! babel wired
|
||||
! babel split-horizon
|
||||
! babel hello-interval 12000
|
||||
! babel update-interval 36000
|
||||
|
||||
! log file /var/log/quagga/babeld.log
|
||||
log stdout
|
||||
|
||||
|
||||
@ -183,3 +183,18 @@ Debug for EIGRP protocol.
|
||||
``show debugging eigrp`` will show all information currently set for eigrpd
|
||||
debug.
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
hostname eigrpd
|
||||
password zebra
|
||||
enable password please-set-at-here
|
||||
!
|
||||
router eigrp 4453
|
||||
network 192.168.1.0/24
|
||||
!
|
||||
log stdout
|
||||
|
||||
|
||||
@ -60,7 +60,6 @@ in the configuration:
|
||||
|
||||
.. clicmd:: set-overload-bit
|
||||
|
||||
|
||||
Set overload bit to avoid any transit traffic.
|
||||
|
||||
.. clicmd:: purge-originator
|
||||
@ -256,9 +255,8 @@ Debugging OpenFabric
|
||||
|
||||
Print which OpenFabric debug levels are active.
|
||||
|
||||
|
||||
OpenFabric configuration example
|
||||
================================
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
A simple example:
|
||||
|
||||
@ -281,3 +279,26 @@ A simple example:
|
||||
!
|
||||
router openfabric 1
|
||||
net 49.0000.0000.0001.00
|
||||
|
||||
|
||||
Alternative example:
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
hostname fabricd
|
||||
|
||||
router openfabric DEAD
|
||||
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
|
||||
lsp-lifetime 65535
|
||||
|
||||
hostname isisd-router
|
||||
domain-password foobar
|
||||
|
||||
interface eth0
|
||||
ip router openfabric DEAD
|
||||
openfabric hello-interval 5
|
||||
openfabric lsp-interval 1000
|
||||
|
||||
! -- optional
|
||||
openfabric retransmit-interval 10
|
||||
openfabric retransmit-throttle-interval
|
||||
|
||||
@ -242,8 +242,9 @@ LDP debugging commands
|
||||
- ``messages``
|
||||
- ``zebra``
|
||||
|
||||
LDP Example Configuration
|
||||
=========================
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
Below configuration gives a typical MPLS configuration of a device located in a
|
||||
MPLS backbone. LDP is enabled on two interfaces and will attempt to peer with
|
||||
@ -306,3 +307,45 @@ that traffic to that destination will be applied.
|
||||
O>* 10.200.0.0/24 [110/210] via 10.115.0.1, eth2, label 17, 00:00:15
|
||||
north-vm#
|
||||
|
||||
|
||||
Additional example demonstrating use of some miscellaneous config options:
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
interface eth0
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
interface lo
|
||||
!
|
||||
mpls ldp
|
||||
dual-stack cisco-interop
|
||||
neighbor 10.0.1.5 password opensourcerouting
|
||||
neighbor 172.16.0.1 password opensourcerouting
|
||||
!
|
||||
address-family ipv4
|
||||
discovery transport-address 10.0.1.1
|
||||
label local advertise explicit-null
|
||||
!
|
||||
interface eth0
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
!
|
||||
address-family ipv6
|
||||
discovery transport-address 2001:db8::1
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
!
|
||||
!
|
||||
l2vpn ENG type vpls
|
||||
bridge br0
|
||||
member interface eth2
|
||||
!
|
||||
member pseudowire mpw0
|
||||
neighbor lsr-id 1.1.1.1
|
||||
pw-id 100
|
||||
!
|
||||
!
|
||||
|
||||
|
||||
@ -243,8 +243,9 @@ Showing OSPF6 information
|
||||
JSON object, with each router having "cost", "isLeafNode" and "children" as
|
||||
arguments.
|
||||
|
||||
OSPF6 Configuration Examples
|
||||
============================
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
Example of ospf6d configured on one interface and area:
|
||||
|
||||
@ -258,3 +259,53 @@ Example of ospf6d configured on one interface and area:
|
||||
area 0.0.0.0 range 2001:770:105:2::/64
|
||||
interface eth0 area 0.0.0.0
|
||||
!
|
||||
|
||||
|
||||
Larger example with policy and various options set:
|
||||
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
debug ospf6 neighbor state
|
||||
!
|
||||
interface fxp0
|
||||
ipv6 ospf6 cost 1
|
||||
ipv6 ospf6 hello-interval 10
|
||||
ipv6 ospf6 dead-interval 40
|
||||
ipv6 ospf6 retransmit-interval 5
|
||||
ipv6 ospf6 priority 0
|
||||
ipv6 ospf6 transmit-delay 1
|
||||
ipv6 ospf6 instance-id 0
|
||||
!
|
||||
interface lo0
|
||||
ipv6 ospf6 cost 1
|
||||
ipv6 ospf6 hello-interval 10
|
||||
ipv6 ospf6 dead-interval 40
|
||||
ipv6 ospf6 retransmit-interval 5
|
||||
ipv6 ospf6 priority 1
|
||||
ipv6 ospf6 transmit-delay 1
|
||||
ipv6 ospf6 instance-id 0
|
||||
!
|
||||
router ospf6
|
||||
router-id 255.1.1.1
|
||||
redistribute static route-map static-ospf6
|
||||
interface fxp0 area 0.0.0.0
|
||||
!
|
||||
access-list access4 permit 127.0.0.1/32
|
||||
!
|
||||
ipv6 access-list access6 permit 3ffe:501::/32
|
||||
ipv6 access-list access6 permit 2001:200::/48
|
||||
ipv6 access-list access6 permit ::1/128
|
||||
!
|
||||
ipv6 prefix-list test-prefix seq 1000 deny any
|
||||
!
|
||||
route-map static-ospf6 permit 10
|
||||
match ipv6 address prefix-list test-prefix
|
||||
set metric-type type-2
|
||||
set metric 2000
|
||||
!
|
||||
line vty
|
||||
access-class access4
|
||||
ipv6 access-class access6
|
||||
exec-timeout 0 0
|
||||
!
|
||||
|
||||
@ -280,7 +280,7 @@ To start OSPF process you have to specify the OSPF router.
|
||||
|
||||
This command enables or disables sending ARP requests to update neighbor
|
||||
table entries. It speeds up convergence for /32 networks on a P2P
|
||||
connection.
|
||||
connection.
|
||||
|
||||
This feature is enabled by default.
|
||||
|
||||
@ -1089,8 +1089,9 @@ Debugging OSPF
|
||||
|
||||
Debug commnd to enable/disable external route summarisation specific debugs.
|
||||
|
||||
OSPF Configuration Examples
|
||||
===========================
|
||||
|
||||
Sample Configuration
|
||||
====================
|
||||
|
||||
A simple example, with MD5 authentication enabled:
|
||||
|
||||
|
||||
@ -395,3 +395,52 @@ learned through BGP using route-maps:
|
||||
!
|
||||
|
||||
In this case, the SR Policy with color `1` and endpoint `1.1.1.1` is selected.
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
! Default pathd configuration sample
|
||||
!
|
||||
password frr
|
||||
log stdout
|
||||
|
||||
segment-routing
|
||||
traffic-eng
|
||||
segment-list test1
|
||||
index 10 mpls label 123
|
||||
index 20 mpls label 456
|
||||
!
|
||||
segment-list test2
|
||||
index 10 mpls label 321
|
||||
index 20 mpls label 654
|
||||
!
|
||||
policy color 1 endpoint 1.1.1.1
|
||||
name one
|
||||
binding-sid 100
|
||||
candidate-path preference 100 name test1 explicit segment-list test1
|
||||
candidate-path preference 200 name test2 explicit segment-list test2
|
||||
!
|
||||
policy color 2 endpoint 2.2.2.2
|
||||
name two
|
||||
binding-sid 101
|
||||
candidate-path preference 100 name def explicit segment-list test2
|
||||
candidate-path preference 200 name dyn dynamic
|
||||
bandwidth 12345
|
||||
metric bound abc 16 required
|
||||
metric te 10
|
||||
!
|
||||
!
|
||||
pcep
|
||||
pcc-peer PCE1
|
||||
address ip 127.0.0.1
|
||||
sr-draft07
|
||||
!
|
||||
pcc
|
||||
peer PCE1
|
||||
!
|
||||
!
|
||||
!
|
||||
|
||||
|
||||
@ -290,3 +290,22 @@ kernel that points to a table to use for forwarding once the rule matches.
|
||||
The creation of a nexthop or nexthop-group is translated to a default route in a
|
||||
table with the nexthops specified as the nexthops for the default route.
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
nexthop-group TEST
|
||||
nexthop 4.5.6.7
|
||||
nexthop 5.6.7.8
|
||||
!
|
||||
pbr-map BLUE seq 100
|
||||
match dst-ip 9.9.9.0/24
|
||||
match src-ip 10.10.10.0/24
|
||||
set nexthop-group TEST
|
||||
!
|
||||
int swp1
|
||||
pbr-policy BLUE
|
||||
|
||||
|
||||
|
||||
@ -656,3 +656,34 @@ setup. This is existing PIM configuration:
|
||||
- Enable pim on the underlay L3 interface via the "ip pim" command.
|
||||
- Configure RPs for the BUM multicast group range.
|
||||
- Ensure the PIM is enabled on the lo of the VTEPs and the RP.
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
debug igmp
|
||||
debug pim
|
||||
debug pim zebra
|
||||
|
||||
! You may want to enable ssmpingd for troubleshooting
|
||||
! See http://www.venaas.no/multicast/ssmping/
|
||||
!
|
||||
ip ssmpingd 1.1.1.1
|
||||
ip ssmpingd 2.2.2.2
|
||||
|
||||
! HINTS:
|
||||
! - Enable "ip pim ssm" on the interface directly attached to the
|
||||
! multicast source host (if this is the first-hop router)
|
||||
! - Enable "ip pim ssm" on pim-routers-facing interfaces
|
||||
! - Enable "ip igmp" on IGMPv3-hosts-facing interfaces
|
||||
! - In order to inject IGMPv3 local membership information in the
|
||||
! PIM protocol state, enable both "ip pim ssm" and "ip igmp" on
|
||||
! the same interface; otherwise PIM won't advertise
|
||||
! IGMPv3-learned membership to other PIM routers
|
||||
|
||||
interface eth0
|
||||
ip pim ssm
|
||||
ip igmp
|
||||
|
||||
|
||||
@ -539,3 +539,21 @@ Debug for RIP protocol.
|
||||
|
||||
Shows all information currently set for ripd debug.
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
|
||||
debug rip events
|
||||
debug rip packet
|
||||
|
||||
router rip
|
||||
network 11.0.0.0/8
|
||||
network eth0
|
||||
route 10.0.0.0/8
|
||||
distribute-list private-only in eth0
|
||||
|
||||
access-list private-only permit 10.0.0.0/8
|
||||
access-list private-only deny any
|
||||
|
||||
@ -71,3 +71,19 @@ ripngd Filtering Commands
|
||||
|
||||
distribute-list local-only out sit1
|
||||
|
||||
|
||||
Sample configuration
|
||||
====================
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
debug ripng events
|
||||
debug ripng packet
|
||||
|
||||
router ripng
|
||||
network sit1
|
||||
route 3ffe:506::0/32
|
||||
distribute-list local-only out sit1
|
||||
|
||||
ipv6 access-list local-only permit 3ffe:506::0/32
|
||||
ipv6 access-list local-only deny any
|
||||
|
||||
@ -1,13 +0,0 @@
|
||||
! -*- eigrpd -*-
|
||||
!
|
||||
! EIGRPDd sample configuration file
|
||||
!
|
||||
!
|
||||
hostname eigrpd
|
||||
password zebra
|
||||
!enable password please-set-at-here
|
||||
!
|
||||
!router eigrp 4453
|
||||
! network 192.168.1.0/24
|
||||
!
|
||||
log stdout
|
||||
@ -5,7 +5,6 @@
|
||||
if EIGRPD
|
||||
noinst_LIBRARIES += eigrpd/libeigrp.a
|
||||
sbin_PROGRAMS += eigrpd/eigrpd
|
||||
dist_examples_DATA += eigrpd/eigrpd.conf.sample
|
||||
vtysh_scan += \
|
||||
eigrpd/eigrp_cli.c \
|
||||
eigrpd/eigrp_dump.c \
|
||||
|
||||
@ -1,27 +0,0 @@
|
||||
! -*- openfabric -*-
|
||||
!
|
||||
! fabricd sample configuration file
|
||||
!
|
||||
hostname fabricd
|
||||
password foo
|
||||
enable password foo
|
||||
log stdout
|
||||
!log file /tmp/fabricd.log
|
||||
!
|
||||
!
|
||||
router openfabric DEAD
|
||||
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
|
||||
! lsp-lifetime 65535
|
||||
|
||||
! hostname isisd-router
|
||||
! domain-password foobar
|
||||
|
||||
interface eth0
|
||||
ip router openfabric DEAD
|
||||
! openfabric hello-interval 5
|
||||
! openfabric lsp-interval 1000
|
||||
|
||||
! -- optional
|
||||
! openfabric retransmit-interval 10
|
||||
! openfabric retransmit-throttle-interval
|
||||
!
|
||||
@ -1,39 +0,0 @@
|
||||
! -*- isis -*-
|
||||
!
|
||||
! ISISd sample configuration file
|
||||
!
|
||||
hostname isisd
|
||||
password foo
|
||||
enable password foo
|
||||
log stdout
|
||||
!log file /tmp/isisd.log
|
||||
!
|
||||
!
|
||||
router isis DEAD
|
||||
net 47.0023.0000.0003.0300.0100.0102.0304.0506.00
|
||||
! is-type level-1
|
||||
|
||||
! -- set the lifetime either for level-1, level-2 or both
|
||||
! lsp-lifetime level-1 65535
|
||||
! lsp-lifetime level-2 65535
|
||||
! lsp-lifetime 65535
|
||||
|
||||
! hostname isisd-router
|
||||
! area-password foobar
|
||||
! domain-password foobar
|
||||
|
||||
interface eth0
|
||||
ip router isis DEAD
|
||||
! isis hello-interval 5
|
||||
! isis lsp-interval 1000
|
||||
|
||||
! -- optional
|
||||
! isis circuit-type level-1
|
||||
! isis password lallaa level-1
|
||||
! isis metric 1 level-1
|
||||
! isis csnp-interval 5 level-1
|
||||
! isis retransmit-interval 10
|
||||
! isis retransmit-throttle-interval
|
||||
! isis hello-multiplier 2 level-1
|
||||
! isis priority 64
|
||||
!
|
||||
@ -5,7 +5,6 @@
|
||||
if ISISD
|
||||
noinst_LIBRARIES += isisd/libisis.a
|
||||
sbin_PROGRAMS += isisd/isisd
|
||||
dist_examples_DATA += isisd/isisd.conf.sample
|
||||
vtysh_scan += \
|
||||
isisd/isis_cli.c \
|
||||
isisd/isis_ldp_sync.c \
|
||||
@ -26,7 +25,6 @@ endif
|
||||
if FABRICD
|
||||
noinst_LIBRARIES += isisd/libfabric.a
|
||||
sbin_PROGRAMS += isisd/fabricd
|
||||
dist_examples_DATA += isisd/fabricd.conf.sample
|
||||
if !ISISD
|
||||
vtysh_scan += \
|
||||
isisd/isis_cli.c \
|
||||
|
||||
@ -1,46 +0,0 @@
|
||||
! -*- ldp -*-
|
||||
!
|
||||
! LDPd sample configuration file
|
||||
!
|
||||
hostname ldpd
|
||||
password zebra
|
||||
log stdout
|
||||
!
|
||||
interface eth0
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
interface lo
|
||||
!
|
||||
mpls ldp
|
||||
dual-stack cisco-interop
|
||||
neighbor 10.0.1.5 password opensourcerouting
|
||||
neighbor 172.16.0.1 password opensourcerouting
|
||||
!
|
||||
address-family ipv4
|
||||
discovery transport-address 10.0.1.1
|
||||
label local advertise explicit-null
|
||||
!
|
||||
interface eth0
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
!
|
||||
address-family ipv6
|
||||
discovery transport-address 2001:db8::1
|
||||
!
|
||||
interface eth1
|
||||
!
|
||||
!
|
||||
!
|
||||
l2vpn ENG type vpls
|
||||
bridge br0
|
||||
member interface eth2
|
||||
!
|
||||
member pseudowire mpw0
|
||||
neighbor lsr-id 1.1.1.1
|
||||
pw-id 100
|
||||
!
|
||||
!
|
||||
line vty
|
||||
!
|
||||
@ -5,7 +5,6 @@
|
||||
if LDPD
|
||||
noinst_LIBRARIES += ldpd/libldp.a
|
||||
sbin_PROGRAMS += ldpd/ldpd
|
||||
dist_examples_DATA += ldpd/ldpd.conf.sample
|
||||
vtysh_scan += ldpd/ldp_vty_cmds.c
|
||||
vtysh_daemons += ldpd
|
||||
man8 += $(MANBUILD)/frr-ldpd.8
|
||||
|
||||
@ -1,52 +0,0 @@
|
||||
!
|
||||
! Zebra configuration saved from vty
|
||||
! 2003/11/28 00:49:49
|
||||
!
|
||||
hostname ospf6d@plant
|
||||
password zebra
|
||||
log stdout
|
||||
service advanced-vty
|
||||
!
|
||||
debug ospf6 neighbor state
|
||||
!
|
||||
interface fxp0
|
||||
ipv6 ospf6 cost 1
|
||||
ipv6 ospf6 hello-interval 10
|
||||
ipv6 ospf6 dead-interval 40
|
||||
ipv6 ospf6 retransmit-interval 5
|
||||
ipv6 ospf6 priority 0
|
||||
ipv6 ospf6 transmit-delay 1
|
||||
ipv6 ospf6 instance-id 0
|
||||
!
|
||||
interface lo0
|
||||
ipv6 ospf6 cost 1
|
||||
ipv6 ospf6 hello-interval 10
|
||||
ipv6 ospf6 dead-interval 40
|
||||
ipv6 ospf6 retransmit-interval 5
|
||||
ipv6 ospf6 priority 1
|
||||
ipv6 ospf6 transmit-delay 1
|
||||
ipv6 ospf6 instance-id 0
|
||||
!
|
||||
router ospf6
|
||||
router-id 255.1.1.1
|
||||
redistribute static route-map static-ospf6
|
||||
interface fxp0 area 0.0.0.0
|
||||
!
|
||||
access-list access4 permit 127.0.0.1/32
|
||||
!
|
||||
ipv6 access-list access6 permit 3ffe:501::/32
|
||||
ipv6 access-list access6 permit 2001:200::/48
|
||||
ipv6 access-list access6 permit ::1/128
|
||||
!
|
||||
ipv6 prefix-list test-prefix seq 1000 deny any
|
||||
!
|
||||
route-map static-ospf6 permit 10
|
||||
match ipv6 address prefix-list test-prefix
|
||||
set metric-type type-2
|
||||
set metric 2000
|
||||
!
|
||||
line vty
|
||||
access-class access4
|
||||
ipv6 access-class access6
|
||||
exec-timeout 0 0
|
||||
!
|
||||
@ -5,7 +5,6 @@
|
||||
if OSPF6D
|
||||
noinst_LIBRARIES += ospf6d/libospf6.a
|
||||
sbin_PROGRAMS += ospf6d/ospf6d
|
||||
dist_examples_DATA += ospf6d/ospf6d.conf.sample
|
||||
vtysh_scan += \
|
||||
ospf6d/ospf6_abr.c \
|
||||
ospf6d/ospf6_asbr.c \
|
||||
|
||||
@ -1,13 +0,0 @@
|
||||
! -*- ospf -*-
|
||||
!
|
||||
! OSPFd sample configuration file
|
||||
!
|
||||
!
|
||||
hostname ospfd
|
||||
password zebra
|
||||
!enable password please-set-at-here
|
||||
!
|
||||
!router ospf
|
||||
! network 192.168.1.0/24 area 0
|
||||
!
|
||||
log stdout
|
||||
@ -5,7 +5,6 @@
|
||||
if OSPFD
|
||||
noinst_LIBRARIES += ospfd/libfrrospf.a
|
||||
sbin_PROGRAMS += ospfd/ospfd
|
||||
dist_examples_DATA += ospfd/ospfd.conf.sample
|
||||
vtysh_scan += \
|
||||
ospfd/ospf_bfd.c \
|
||||
ospfd/ospf_dump.c \
|
||||
|
||||
@ -1,41 +0,0 @@
|
||||
! Default pathd configuration sample
|
||||
!
|
||||
password frr
|
||||
log stdout
|
||||
|
||||
segment-routing
|
||||
traffic-eng
|
||||
segment-list test1
|
||||
index 10 mpls label 123
|
||||
index 20 mpls label 456
|
||||
!
|
||||
segment-list test2
|
||||
index 10 mpls label 321
|
||||
index 20 mpls label 654
|
||||
!
|
||||
policy color 1 endpoint 1.1.1.1
|
||||
name one
|
||||
binding-sid 100
|
||||
candidate-path preference 100 name test1 explicit segment-list test1
|
||||
candidate-path preference 200 name test2 explicit segment-list test2
|
||||
!
|
||||
policy color 2 endpoint 2.2.2.2
|
||||
name two
|
||||
binding-sid 101
|
||||
candidate-path preference 100 name def explicit segment-list test2
|
||||
candidate-path preference 200 name dyn dynamic
|
||||
bandwidth 12345
|
||||
metric bound abc 16 required
|
||||
metric te 10
|
||||
!
|
||||
!
|
||||
pcep
|
||||
pcc-peer PCE1
|
||||
address ip 127.0.0.1
|
||||
sr-draft07
|
||||
!
|
||||
pcc
|
||||
peer PCE1
|
||||
!
|
||||
!
|
||||
!
|
||||
@ -5,7 +5,6 @@
|
||||
if PATHD
|
||||
noinst_LIBRARIES += pathd/libpath.a
|
||||
sbin_PROGRAMS += pathd/pathd
|
||||
dist_examples_DATA += pathd/pathd.conf.sample
|
||||
vtysh_scan += $(top_srcdir)/pathd/path_cli.c
|
||||
vtysh_daemons += pathd
|
||||
# TODO add man page
|
||||
|
||||
@ -1,19 +0,0 @@
|
||||
! Sample pbrd configuration file
|
||||
!
|
||||
! A quick example of what a pbr configuration might look like
|
||||
!
|
||||
!
|
||||
log stdout
|
||||
!
|
||||
! nexthop-group TEST
|
||||
! nexthop 4.5.6.7
|
||||
! nexthop 5.6.7.8
|
||||
! !
|
||||
! pbr-map BLUE seq 100
|
||||
! match dst-ip 9.9.9.0/24
|
||||
! match src-ip 10.10.10.0/24
|
||||
! set nexthop-group TEST
|
||||
! !
|
||||
! int swp1
|
||||
! pbr-policy BLUE
|
||||
!
|
||||
@ -5,7 +5,6 @@
|
||||
if PBRD
|
||||
noinst_LIBRARIES += pbrd/libpbr.a
|
||||
sbin_PROGRAMS += pbrd/pbrd
|
||||
dist_examples_DATA += pbrd/pbrd.conf.sample
|
||||
vtysh_scan += \
|
||||
pbrd/pbr_vty.c \
|
||||
pbrd/pbr_debug.c \
|
||||
|
||||
@ -1,40 +0,0 @@
|
||||
!
|
||||
! pimd sample configuration file
|
||||
!
|
||||
hostname quagga-pimd-router
|
||||
password zebra
|
||||
!enable password zebra
|
||||
!
|
||||
!log file pimd.log
|
||||
log stdout
|
||||
!
|
||||
line vty
|
||||
exec-timeout 60
|
||||
!
|
||||
!debug igmp
|
||||
!debug pim
|
||||
!debug pim zebra
|
||||
!
|
||||
ip multicast-routing
|
||||
!
|
||||
! ! You may want to enable ssmpingd for troubleshooting
|
||||
! ! See http://www.venaas.no/multicast/ssmping/
|
||||
! !
|
||||
! ip ssmpingd 1.1.1.1
|
||||
! ip ssmpingd 2.2.2.2
|
||||
!
|
||||
! ! HINTS:
|
||||
! ! - Enable "ip pim ssm" on the interface directly attached to the
|
||||
! ! multicast source host (if this is the first-hop router)
|
||||
! ! - Enable "ip pim ssm" on pim-routers-facing interfaces
|
||||
! ! - Enable "ip igmp" on IGMPv3-hosts-facing interfaces
|
||||
! ! - In order to inject IGMPv3 local membership information in the
|
||||
! ! PIM protocol state, enable both "ip pim ssm" and "ip igmp" on
|
||||
! ! the same interface; otherwise PIM won't advertise
|
||||
! ! IGMPv3-learned membership to other PIM routers
|
||||
!
|
||||
interface eth0
|
||||
ip pim ssm
|
||||
ip igmp
|
||||
|
||||
! -x-
|
||||
@ -7,7 +7,6 @@ noinst_LIBRARIES += pimd/libpim.a
|
||||
sbin_PROGRAMS += pimd/pimd
|
||||
bin_PROGRAMS += pimd/mtracebis
|
||||
noinst_PROGRAMS += pimd/test_igmpv3_join
|
||||
dist_examples_DATA += pimd/pimd.conf.sample
|
||||
vtysh_scan += pimd/pim_cmd.c
|
||||
vtysh_daemons += pimd
|
||||
man8 += $(MANBUILD)/frr-pimd.8
|
||||
|
||||
@ -642,7 +642,7 @@ fi
|
||||
|
||||
|
||||
%files
|
||||
%doc */*.sample* COPYING
|
||||
%doc COPYING
|
||||
%doc doc/mpls
|
||||
%doc README.md
|
||||
/usr/share/yang/*.yang
|
||||
@ -655,9 +655,6 @@ fi
|
||||
%dir %attr(750,root,root) %{_localstatedir}/log/frr
|
||||
%dir %attr(750,root,root) %{rundir}
|
||||
%endif
|
||||
%if 0%{?vty_group:1}
|
||||
%attr(750,%{frr_user},%{vty_group}) %{configdir}/vtysh.conf.sample
|
||||
%endif
|
||||
%{_infodir}/frr.info.gz
|
||||
%{_mandir}/man*/*
|
||||
%{_sbindir}/zebra
|
||||
|
||||
@ -1,22 +0,0 @@
|
||||
! -*- rip -*-
|
||||
!
|
||||
! RIPd sample configuration file
|
||||
!
|
||||
hostname ripd
|
||||
password zebra
|
||||
!
|
||||
! debug rip events
|
||||
! debug rip packet
|
||||
!
|
||||
router rip
|
||||
! network 11.0.0.0/8
|
||||
! network eth0
|
||||
! route 10.0.0.0/8
|
||||
! distribute-list private-only in eth0
|
||||
!
|
||||
!access-list private-only permit 10.0.0.0/8
|
||||
!access-list private-only deny any
|
||||
!
|
||||
!log file ripd.log
|
||||
!
|
||||
log stdout
|
||||
@ -5,7 +5,6 @@
|
||||
if RIPD
|
||||
noinst_LIBRARIES += ripd/librip.a
|
||||
sbin_PROGRAMS += ripd/ripd
|
||||
dist_examples_DATA += ripd/ripd.conf.sample
|
||||
vtysh_scan += \
|
||||
ripd/rip_cli.c \
|
||||
ripd/rip_debug.c \
|
||||
|
||||
@ -1,20 +0,0 @@
|
||||
! -*- rip -*-
|
||||
!
|
||||
! RIPngd sample configuration file
|
||||
!
|
||||
hostname ripngd
|
||||
password zebra
|
||||
!
|
||||
! debug ripng events
|
||||
! debug ripng packet
|
||||
!
|
||||
!
|
||||
router ripng
|
||||
! network sit1
|
||||
! route 3ffe:506::0/32
|
||||
! distribute-list local-only out sit1
|
||||
!
|
||||
!ipv6 access-list local-only permit 3ffe:506::0/32
|
||||
!ipv6 access-list local-only deny any
|
||||
!
|
||||
log stdout
|
||||
@ -50,5 +50,3 @@ ripngd_ripngd_SOURCES = \
|
||||
nodist_ripngd_ripngd_SOURCES = \
|
||||
yang/frr-ripngd.yang.c \
|
||||
# end
|
||||
|
||||
dist_examples_DATA += ripngd/ripngd.conf.sample
|
||||
|
||||
@ -1,6 +0,0 @@
|
||||
! Default sharpd configuration sample
|
||||
!
|
||||
! There are no `default` configuration commands for sharpd
|
||||
! all commands are at the view or enable level.
|
||||
!
|
||||
log stdout
|
||||
@ -5,7 +5,6 @@
|
||||
if SHARPD
|
||||
noinst_LIBRARIES += sharpd/libsharp.a
|
||||
sbin_PROGRAMS += sharpd/sharpd
|
||||
dist_examples_DATA += sharpd/sharpd.conf.sample
|
||||
vtysh_scan += sharpd/sharp_vty.c
|
||||
vtysh_daemons += sharpd
|
||||
man8 += $(MANBUILD)/frr-sharpd.8
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
! Default staticd configuration sample
|
||||
!
|
||||
log stdout
|
||||
!
|
||||
! ip route 4.5.6.7/32 10.10.10.10
|
||||
@ -5,7 +5,6 @@
|
||||
if STATICD
|
||||
noinst_LIBRARIES += staticd/libstatic.a
|
||||
sbin_PROGRAMS += staticd/staticd
|
||||
dist_examples_DATA += staticd/staticd.conf.sample
|
||||
vtysh_scan += staticd/static_vty.c
|
||||
vtysh_daemons += staticd
|
||||
man8 += $(MANBUILD)/frr-staticd.8
|
||||
|
||||
@ -5,7 +5,6 @@
|
||||
if VRRPD
|
||||
noinst_LIBRARIES += vrrpd/libvrrp.a
|
||||
sbin_PROGRAMS += vrrpd/vrrpd
|
||||
# dist_examples_DATA += staticd/staticd.conf.sample
|
||||
vtysh_scan += vrrpd/vrrp_vty.c
|
||||
vtysh_daemons += vrrpd
|
||||
man8 += $(MANBUILD)/frr-vrrpd.8
|
||||
|
||||
@ -4,7 +4,6 @@
|
||||
|
||||
if VTYSH
|
||||
bin_PROGRAMS += vtysh/vtysh
|
||||
dist_examples_DATA += vtysh/vtysh.conf.sample
|
||||
man1 += $(MANBUILD)/vtysh.1
|
||||
endif
|
||||
|
||||
|
||||
@ -1,7 +0,0 @@
|
||||
!
|
||||
! Sample configuration file for vtysh.
|
||||
!
|
||||
!service integrated-vtysh-config
|
||||
!hostname quagga-router
|
||||
!username root nopassword
|
||||
!
|
||||
@ -4,7 +4,6 @@
|
||||
|
||||
if ZEBRA
|
||||
sbin_PROGRAMS += zebra/zebra
|
||||
dist_examples_DATA += zebra/zebra.conf.sample
|
||||
vtysh_scan += \
|
||||
zebra/debug.c \
|
||||
zebra/interface.c \
|
||||
|
||||
@ -1,23 +0,0 @@
|
||||
! -*- zebra -*-
|
||||
!
|
||||
! zebra sample configuration file
|
||||
!
|
||||
hostname Router
|
||||
password zebra
|
||||
enable password zebra
|
||||
!
|
||||
! Interface's description.
|
||||
!
|
||||
!interface lo
|
||||
! description test of desc.
|
||||
!
|
||||
!interface sit0
|
||||
! multicast
|
||||
|
||||
!
|
||||
! Static default route sample.
|
||||
!
|
||||
!ip route 0.0.0.0/0 203.181.89.241
|
||||
!
|
||||
|
||||
!log file zebra.log
|
||||
Loading…
Reference in New Issue
Block a user