doc: Document the maximum-paths command for bgp

This was apparently missing from our documentation.
Let's add it in.

Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit is contained in:
Donald Sharp 2021-07-15 08:10:10 -04:00
parent a95ba7a7c8
commit 4a09f22f3d

View File

@ -401,6 +401,22 @@ Route Selection
paths learned from any of eBGP, iBGP, or confederation neighbors will
be multipath if they are otherwise considered equal cost.
.. clicmd:: maximum-paths (1-128)
Sets the maximum-paths value used for ecmp calculations for this
bgp instance in EBGP. The maximum value listed, 128, can be limited by
the ecmp cli for bgp or if the daemon was compiled with a lower
ecmp value. This value can also be set in ipv4/ipv6 unicast/labeled
unicast to only affect those particular afi/safi's.
.. clicmd:: maximum-paths ibgp (1-128) [equal-cluster-length]
Sets the maximum-paths value used for ecmp calculations for this
bgp instance in IBGP. The maximum value listed, 128, can be limited by
the ecmp cli for bgp or if the daemon was compiled with a lower
ecmp value. This value can also be set in ipv4/ipv6 unicast/labeled
unicast to only affect those particular afi/safi's.
.. _bgp-distance:
Administrative Distance Metrics