frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
- Remove incorrect requirement for `service integrated-vtysh-config`
when producing a delta.
- Add `--test-reset` option which suppresses non-parseable lines from the
produced delta
- Use new features in common_config.py
Signed-off-by: Christian Hopps <chopps@labn.net>
TMUX and Screen support when running topotests inside docker. This
allows the gdb, shell and vtysh features to correctly work even when
running the tests inside docker.
Add options:
--asan-abort :: aborts the process on ASAN errors
--strace-daemons :: strace some or all daemons
Signed-off-by: Christian Hopps <chopps@labn.net>
Some BGP updates received by BGP invite local router to
install a route through itself. The system will not do it, and
the route should be considered as not valid at the earliest.
This case is detected on the zebra, and this detection prevents
from trying to install this route to the local system. However,
the nexthop tracking mechanism is called, and acts as if the route
was valid, which is not the case.
By detecting in BGP that use case, we avoid installing the invalid
routes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Since the common CLI code calls nb_init, allow specifying some modules
to load by overriding test_yang_models.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a new topotest that features a topology with seven routers spread
across four OSPF areas:
* 1 backbone area;
* 1 regular non-backbone area (0.0.0.1);
* 1 stub area (0.0.0.2);
* 1 NSSA area (0.0.0.3).
All routers have both GR and GR helper functionality enabled in
the configuration. The test consists of restarting each router,
one at time, and checking that all forwarding planes (and LSDBs)
are kept intact during those restarts.
A successful run takes about three minutes to finish.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Using "write memory" to save the daemons' configurations before
restarting them can cause log files to stop working correctly. Add
a new "save_config" to the kill_router_daemons() function to prevent
that from happening when saving the configurations isn't necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Speedup (large topo): OLD: ~6 minutes NEW: ~1 second
(when paired with generate_support_bundle.py changes)
- Collect from each node in parallel
Bug fixes:
- sub-directory test name was the same internal pytest function name
for any test, and not the actual test name.
Signed-off-by: Christian Hopps <chopps@labn.net>
On a loaded machine running FRR with ASAN I've got the following result:
INFO: waiting MSDP connection from peer 10.254.254.3 on router r1
INFO: 'router_json_cmp' polling started (interval 1 secs, maximum 30 tries)
INFO: 'router_json_cmp' succeeded after 22.53 seconds
Which is very close to the limit, so lets bump the value 4x to avoid a
test false positive.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This python fixture was way too complex for what is needed.
Eliminate gratuitous options/over-engineering:
- Change from non-deterministic `wait` and `attempts` to a single
`retry_timeout` value. This is both more deterministic, as well as
what the user should actually be thinking about.
- Use a fixed 2 second pause between executing the wrapped function
rather than a bunch of arbitrary choices of 2, 3 and 4 seconds
spread all over the test code.
- Get rid of the multiple variables for determining what "Positive" and
"Negative" results are. Instead just implement what all the user code
already wants, i.e., boolean False or a str (errormsg) means
"Negative" result otherwise it's a "Positive" result.
- As part of the above the inversion logic is much more comprehensible
in the fixture code (and more correct to boot).
Signed-off-by: Christian Hopps <chopps@labn.net>
Pylint cleanup in commit 914faab594 removed a crucial function
parameter that inverted the logic of verify function calls.
Signed-off-by: Christian Hopps <chopps@labn.net>
Modify both the default and vrf ospf6 topologies to include a test
where write-multiplier is configured to a non-default value and
the ospf6 neighbors are reset then checked.
Run black on both test files.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Currently, the dynamic hostname cache is global. It is incorrect because
neighbors in different VRFs may have the same system ID and different
hostnames.
This also fixes a memory leak - when the instance is deleted, the cache
must be cleaned up and the cleanup thread must be cancelled.
Fixes#8832.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
ospf6d (and all other daemons except zebra) doesn't correctly process
`interface X vrf Y`, because it doesn't know existing VRFs at the time
of configuration file reading. Therefore it doesn't apply configuration
provided in the interface node.
Fix the problem by removing `vrf Y` part, having just an interface name
is enough.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When filtering sessions on show bgp summary with failed, established,
neighbor and remote-as options, add a counter of displayed neighbors
in addition to the total number of neighbor :
"Displayed neighbors X"
ubuntu# show bgp summary failed remote-as external
IPv4 Unicast Summary (VRF default):
Neighbor EstdCnt DropCnt ResetTime Reason
10.200.200.2 0 0 never Waiting for NHT
172.16.29.2 0 0 never Waiting for NHT
10.22.1.2 0 0 never Waiting for NHT
Displayed neighbors 3
Total number of neighbors 5
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display on which VRF/view the neighbor was not found. Useful when
selecting "vrf all".
Before patch:
No such neighbor in this view/vrf
After patch:
No such neighbor in VRF default
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Issue: There was an error reported by Pylint regarding "expected" keyword:
Unexpected keyword argument 'expected' in function call (unexpected-keyword-arg)
Fix: We have defined expected keyword in all topojson APIs.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Following functionality is covered:
+--------+ BGP +--------+ BGP +--------+ +--------+
SN1 | | IPv4/v6 | | EVPN | | | |
======+ Host1 +---------+ PE1 +------+ PE2 +------+ Host2 +
| | | | | | | |
+--------+ +--------+ +--------+ +--------+
Host1 is connected to PE1 and host2 is connected to PE2
Host1 and PE1 have IPv4/v6 BGP sessions.
PE1 and PE2 gave EVPN session.
Host1 advertises IPv4/v6 prefixes to PE1.
PE1 advertises these prefixes to PE2 as EVPN type-5 routes.
Gateway IP for these EVPN type-5 routes is host1 IP.
Host1 MAC/IP is advertised by PE1 as EVPN type-2 route
Following testcases are covered:
TC_1:
Check BGP and zebra states for above topology at PE1 and PE2.
TC_2:
Stop advertising prefixes from host1. It should withdraw type-5 routes. Check
states at PE1 and PE2
Advertise the prefixes again. Check states.
TC_3:
Shut down VxLAN interface at PE1. This should withdraw type-2 routes. Check
states at PE1 and PE2.
Enable VxLAN interface again. Check states.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
To start we use 10k static route config. This test goes along with
recent batching changes it will fail w/o them (b/c some operations w/o
batching take 100 times as long).
This test should be added to over time for other large config
items (e.g., acl, policy, etc)
Signed-off-by: Christian Hopps <chopps@labn.net>
Test uses staticd which required some C++ header protections.
Additionally, the test also runs in the ubuntu20 docker container as
grpc is supported there by the packaging system.
Signed-off-by: Christian Hopps <chopps@labn.net>
similarly to what was done for IS-IS in commit 01d43141, combine
the SRGB and SRLB commands for OSPF-SR, so that we can replace
overlapping ranges in one sweep change.
Also allow the range configuration to be stored before SR is enabled.
There is no reason why we should not - in fact that constraint meant
that we were always requesting the default label ranges regardless
of what we actually wanted to use.
Finally, update the topotests now that we do not need to refresh
the SRGB/SRLB/MSD after disabling SR. Note that the prefix-sid still
needs to be re-added.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Modify VRF/view display in show bgp summary:
- to be more concise
- to display on which VRF/view no neighbor was found
Before patch:
ubuntu# show bgp vrf all summary
Instance default:
IPv4 Unicast Summary:
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary:
Instance private:
IPv4 Unicast Summary:
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found
% No BGP neighbors found
After patch:
ubuntu# show bgp vrf all summary
IPv4 Unicast Summary (VRF default):
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary (VRF default):
(...)
IPv4 Unicast Summary (VRF private):
(...)
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found in VRF default
% No BGP neighbors found in VRF private
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
New OSPFv3 NSSA test:
* When a static route is redistributed to an NSSA router it should be
type 7 and should show up in OSPFv3 route database.
* Test LSA Type 7 and route removal.
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
https://github.com/FRRouting/frr/pull/5865#discussion_r597670225
As this comment says. ZEBRA_FLAG_XXX should not have been used.
To communicate SRv6 Route Information. A simple Nexthop Flag would
have been sufficient for SRv6 information. And I fixed the whole
thing that way.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The "show sharp segment-routing srv6" command was a
json output command, but it did not follow the common
practice of the other commands.
It follows the review and outputs the json format by
using the json keyword. Otherwise, it produces human
readable output.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit fix bgpd's prefix-sid type4,5 feature which has
miss implementation from https://github.com/FRRouting/frr/pull/5653
was merged. Due to some nessesary lines are not presented.
When bgpd receives multi update message with same service-sid on
prefix-sid type-5 attribute, bgpd will crash arround path-attribute's
values object reference count.
And also, this commit add a topotest to check that feature work fine.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works.
This commit add new topotest to verify SRv6-manager's functionality.
Following tests are performed on this topotest.
- check that SRv6-locator is set correctly
- check that default SRv6-function locator is set correctly
- check that SRv6-function is installed as ipv6 route correctly
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit checks seg6local route configuration via ZAPI is
working fine.
SRv6 feature is little young feature as kernel feature so netlink
interface may be changed/updated in the future. And this ZAPI extention
is something to support new routing paradigm, so it should be checked by
topotests until srv6 feature of linux kernel will be well stable.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
There are two possible use-cases for the `vrf_bind` function:
- bind socket to an interface in a vrf
- bind socket to a vrf device
For the former case, there's one problem - success is returned when the
interface is not found. In that case, the socket is left unbound without
throwing an error.
For the latter case, there are multiple possible problems:
- If the name is not set, then the socket is left unbound (zebra, vrrp).
- If the name is "default" and there's an interface with that name in the
default VRF, then the socket is bound to that interface.
- In most daemons, if the router is configured before the VRF is actually
created, we're trying to open and bind the socket right after the
daemon receives a VRF registration from zebra. We may not receive the
VRF-interface registration from zebra yet at that point. Therefore,
`if_lookup_by_name` fails, and the socket is left unbound.
This commit fixes all the issues and updates the function description.
Suggested-by: Pat Ruddy <pat@voltanet.io>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add ability to filter session on show bgp summary by neighbor or
remote AS:
ubuntu# show bgp summary ?
neighbor Show only the specified neighbor session
remote-as Show only the specified remote AS session
ubuntu# show bgp summary neighbor ?
A.B.C.D Neighbor to display information about
WORD Neighbor on BGP configured interface
X:X::X:X Neighbor to display information about
ubuntu# show bgp summary remote-as ?
(1-4294967295) AS number
external External (eBGP) AS sessions
internal Internal (iBGP) AS sessions
This patch includes the documentation and the topotest.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Test case test_verify_mroute_when_5_different_receiver_joining_same_sources_p0
is failing intermittently in master. Fixed the issue.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Automated test cases to verify BGP Graceful Shutdown community functionality,
with 2 different topologies.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
We only need an instance when we have at least one area configured in a
VRF. Currently we have the following issues:
- instance for the default VRF is always created
- instance is not removed after the last area config is removed
This commit fixes both issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When the redistribution is configured in non-default VRF, isisd should
redistribute routes from this VRF instead of default.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Change every `-` to `_` in directory names. This is to avoid mixing _ and -.
Just for consistency and directory sorting properly.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
There is a rare case where with prefix peers the peer is
completely absent from the json output when checking the
peer state resulting in a python key error. Check key exists
before checking the state.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
parse_topology function doesn't correctly process vertex types with
spaces. Therefore the reference topology files are completely messed up,
we have values in incorrect fields - types in metrics, metrics in
parents, etc.
This commit fixes the parsing function and the reference files.
The same fix was done for isis-topo1-vrf in #8365.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Not having scapy in the docker image leads to very obtuse failures in
the pim bsm tests (obtuse, as in, it just fails without any hint as to
why...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The previous method, using zassert.h and hoping nothing includes
assert.h (which, on glibc at least, just does "#undef assert" and puts
its own definition in...) was fragile - and actually broke undetected.
Just provide our own assert.h and control overriding by putting it in a
separate directory to add to the include path (or not.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Individual tests must not depend on each other. In particular, a test
can't be sure that the previous test config is applied or cleared.
It is definitely not true when a single test is executed, for example:
`test_bgp_auth.py::test_prefix_peer_remove_passwords`.
This commit makes all tests independent of each other. It also adds a
call to check_all_peers_established at the start of "remove_passwords"
tests to make sure that we not only block new peers with an incorrect
password, but also clean the existing peers.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
YANG model and CLI commands allow user to configure LDP-sync per area.
But the actual implementation is incorrect - all commands are changing
the config for the whole VRF instead of a single area. This commit fixes
this issue by actually implementing per area configuration.
Fixes#8578.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we don't allow to configure the interface before the area is
configured. This approach has the following issues:
1. The area config can be deleted even when we have an interface config
relying on it. The code is not ready for that - we'll have a whole
bunch of stale pointers if user does that.
2. The code doesn't correctly process the event of changing the VRF for
an interface. There is no mechanism to ensure that the area exists
in the new VRF so currently the circuit still stays in the old VRF.
This commit allows an arbitrary order of area/interface configuration.
There is no more need to configure the area before configuring the
interface.
This change fixes both the issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
DR information is missing under "show ip ospf interface [json]".
Added DR infomation to display in "show ip ospf interface".
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
The current log prints maximum wait time which is not actually correct,
because it doesn't include the command execution time. We usually have
"failed after X seconds" log with X being far longer than this maximum.
Let's print the maximum number of tries instead.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This test is completely incorrect on test_bfd_loss_intermediate step.
It shuts down the interface and then "waiting" for the BGP session to
fail. But instead of the actual wait it compares the output of "show bfd
peers" with the "up" state. As it does this comparison right after the
interface shutdown, the BFD session has not yet failed and the comparison
is always successful except very rare cases when the command takes a lot
of time to execute (due to the heavy load on CI system I suppose).
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This function kills all processes that happen to have the same
name to frr processes and it was only ever used in the setup.
Setup should not be used to kill old runs. That should be a
separate process.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This test establishes a binding between nbma ip of a spoke and its
protocol address. This information is pushed to hub.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Just another round of trying to add pytest.mark.bgpd. Not finished yet just
what I could stand doing for a few minutes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fixes:
/usr/lib/python3.9/site-packages/_pytest/config/__init__.py:1463: in getoption
val = getattr(self.option, name)
E AttributeError: 'Namespace' object has no attribute 'topology_only'
The above exception was the direct cause of the following exception:
/usr/lib/python3.9/site-packages/pluggy/manager.py:127: in register
hook._maybe_apply_history(hookimpl)
/usr/lib/python3.9/site-packages/pluggy/hooks.py:333: in _maybe_apply_history
res = self._hookexec(self, [method], kwargs)
/usr/lib/python3.9/site-packages/pluggy/manager.py:93: in _hookexec
return self._inner_hookexec(hook, methods, kwargs)
/usr/lib/python3.9/site-packages/pluggy/manager.py:84: in <lambda>
self._inner_hookexec = lambda hook, methods, kwargs: hook.multicall(
tests/topotests/conftest.py:62: in pytest_configure
if config.getoption("--topology-only"):
/usr/lib/python3.9/site-packages/_pytest/config/__init__.py:1474: in getoption
raise ValueError(f"no option named {name!r}") from e
E ValueError: no option named 'topology_only'
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Description:
BGP session not established for ipv6 link local address with vrf config
Problem Description/Summary :
BGP session not established for ipv6 link local address with vrf configyy
1.Configure ipv6 link-local address fe80::1234/64 on dut1 and fe80::4567/64 on dut2
2.Configure BGP neighbors for ipv6 link-local on both dut1 and dut2
3.Verify BGP session is UP over link-local ipv6 address
4.Observed that bgp session not established for ipv6 link local address
Expected Behavior :
BGP session should be established for ipv6 link local address with vrf config
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
These are for string quoting (`%pSQ`) and string escaping (`%pSE`); the
sets / escape methods are currently rather "basic" and might be extended
in the future.
Signed-off-by: David Lamparter <equinox@diac24.net>
Analogous to Linux kernel `%pV` (but our mechanism expects 2 specifier
chars and `%pVA` is clearer anyway.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... to suppress the warnings when using something that isn't quite ISO C
compatible and would otherwise cause compiler warnings from `-Wformat`.
Signed-off-by: David Lamparter <equinox@diac24.net>
Three new tests:
- OSPFv3 convergence using 'ipv6 ospf6 neighbor json'
- Default route functionality:
* Check that the LSA is present
* Check that the route was installed
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This replaces `%n` with a safe, out-of-band option that simply records
the start and end offset of the output produced for each `%...`
specifier.
The old `%n` code is removed.
Signed-off-by: David Lamparter <equinox@diac24.net>
Allowing printfrr extensions to directly write to the output buffer has
a few advantages:
- there is no arbitrary length limit imposed (previously 64)
- the output doesn't need to be copied another time
- the extension can directly use bprintfrr() to put together pieces
The downside is that the theoretical length (regardless of available
buffer space) must be computed correctly.
Extended unit tests to test these paths a bit more thoroughly.
Signed-off-by: David Lamparter <equinox@diac24.net>
When "bgp bestpath peer-type multipath-relax" is enabled, multipaths
with both eBGP and iBGP learned routes may exist. It is not desirable
for the iBGP next hops to be discarded from the FIB because they are not
directly connected. When publishing a nexthop group to zebra, the
ZEBRA_FLAG_ALLOW_RECURSION flag is normally not set when the best path
is eBGP; when "bgp bestpath aspath multipath-relax" is configured, the
flag will now be set if any paths are from iBGP peers. This leaves
all-eBGP multipaths still requiring nexthops over connected routes.
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
This new BGP configuration is akin to "bgp bestpath aspath
multipath-relax". When applied, paths learned from different peer types
will be eligible to be considered for multipath (ECMP). Paths from all
of eBGP, iBGP, and confederation peers may be included in multipaths
if they are otherwise equal cost.
This change preserves the existing bestpath behavior of step 10's result
being returned, not the result from steps 8 and 9, in the case where
both 8+9 and 10 determine a winner.
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
This new test launches a small network composed by 4 OSPF routers with
Traffic Engineering and Segment Routing configuration. To assess the Link
State Traffic Engineering feature, the TED of each router is compared
against the reference TED which corresponds to the network topology.
Then a series of 6 steps, where Link, TE & SR configurations are modified
up to r4 shutwdown, are used to verify that the TED is correctly updated
on the 4 routers.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Changes:
- Decrease hello interval to avoid packet loss slow downs
- Decrease dead interval to converge faster
- Remove previous 'Full' state check that wasn't checking for all
peers (only one per router)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The previous, more complex mechanism failed to take into account that
git worktrees only have a stub .git file & copying the worktree itself
is not enough. Just extract a file list beforehand & don't bother with
git inside the container.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
The following error is shown when running the OSPFv3 tests
2021-03-16 23:37:44,792 INFO: Function returned global name 'data_rid' is not defined
2021-03-16 23:37:44,792 INFO: Retry [#1] after sleeping for 2s
2021-03-16 23:37:46,794 INFO: Verifying OSPF6 neighborship on router r1:
2021-03-16 23:37:46,993 INFO: Output for command [ show ipv6 ospf6 neighbor ] on router r1:
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
2.2.2.2 1 00:00:03 Full/PointToPoint 00:00:01 r1-r2-eth0[PointToPoint]
Fix the "data_rid" warning by using the correct variable
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Currently there is a single interval for both RX and TX echo functions.
This commit introduces separate RX and TX timers for echo packets.
The main advantage is to be able to set the receive interval to zero
when we don't want to receive echo packets from the remote system.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Additional example usage of iproute2_is_vrf_capable check in
isis-topo1-vrf topotest.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Example usage of iproute2_is_vrf_capable check in bgp_multi_vrf_topo1
and bgp_multi_vrf_topo2 topotests.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
The test has been failing often recently and it is causing some false
positives for unrelated PRs.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We version the tests with the source code so we should no longer attempt
to support old versions in development branch.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The new ospf-sr-topo2 tests are much broader and detailed,
hence it makes no sense to keep the old ospf-sr-topo1
tests.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
1. Improved error meesage logging.
2. No functionality changes only put some meaningfull error messages.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Avoid undocumented topotest dependency on installing en_US locale.
With this change dependency is removed.
Signed-off-by: Christian Hopps <chopps@labn.net>
Didn't test this but it's already randomly broken so cant be worse
Hopefully fixes:
raise InvalidCLIError("%s" % output)
InvalidCLIError: line 2: % Command incomplete[4]: bgp
large-community-list standard Test1 permit
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Pass the topogen 'tgen' object into the startRouterDaemons()
method. it can be used to start a debug cli immediately after
starting a daemon, and that can be handy.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Sleeping when convergence is not guaranteed in 60 seconds
and then testing the rib to see if it has the data is
not a great way to have a test complete all the time.
Modify the code so that we check for convergence
and if we have converged then look in the rib.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. There were few tests where routes were configured with blackhole and
non-blackhole nexthops simultaneously, enhanced tests accordingly and
verified in master branch and with PR #8158 changes.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Add some pytest.mark.bgpd. This is about all I could stomach doing
in one patch. I'll do another pass at another time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the last SID in the TI-LFA repair list is an Adj-SID from the
penultimate hop router towards the final hop, the No-PHP flag of the
original Prefix-SID must be honored in the repair list itself since
the penultimate hop router won't have a chance to process that SID
and pop it if necessary.
Reported-by: Fredi Raspall <fredi@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There are two fixes to handle slow convergence on ARM -
1. Ping on every re-try attempt to account for initial packet loss
2. Handle incomplete show outputs gracefully
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The changes add the "jsoncmp_pass" and the "jsoncmp_fail" commands to
compare VTY shell's JSON output to an expected JSON object during
topotests using the LabN testing framework. This helps to eliminate
false negative test results (i.e. due to routes beeing out of order
after convergence or cosmetic changes in VTY shell's text output).
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
When parsing the output of "ip -6 address", allow arbitrary base interface
names (the part after "@" in the interface name), not just "if0-9". Without
this, link-local addresses sometimes are attributed to the wrong interface
because we're not matching the interface name but still handle the
interface's addresses.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Make the generate-support-bundle script and interactions more
python3-friendly, and use python3 explicitly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Modify the timers on the bgp_blackhole_community test to
be more aggressive so our test system will recover faster
when we drop packets.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add pytest marking for ospfd. This commit also has some other test markings
because I do not want to have to go through the same test multiple times.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have a ospfd.conf file in the r2 directory but the
ldp-sync-isis-topo1 test does not use ospf. Let's remove it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Only one of the four reference files was present; add the missing
three. The test just silently passed if a ref file was missing:
change that to a failure.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a test for the infinite recursion case fixed
with 0c4dbb5f8fe8fb188fa0e0aa8ce04764e893b79b
See that commit for details of the problem. This test uses a simpler
version of the repro found there as the test.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This test relied on the default addition of SVI MAC in zebra
now this has been fixed the test needs to be updated to work
with the new behaviour.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
In test_converge_protocols() use sed to match the "show ip(v6) route"
header and strip it, rather than using tail which requires hardcoding
the expected length of the header (which is subject to change).
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
