mirror of
https://git.proxmox.com/git/mirror_frr
synced 2025-05-01 23:29:38 +00:00
pathd. TED support . Topotest - [part 3/4]
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
This commit is contained in:
Javier Garcia
parent
f2b9485d6f
commit
f008db919d
23
tests/topotests/ospf-sr-te-topo1/dst/zebra.conf
Normal file
23
tests/topotests/ospf-sr-te-topo1/dst/zebra.conf
Normal file
@ -0,0 +1,23 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname dst
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 9.9.9.2/32
|
||||
ipv6 address 2001:db8:1066::2/128
|
||||
!
|
||||
interface eth-rt6
|
||||
ip address 10.0.11.2/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
16
tests/topotests/ospf-sr-te-topo1/rt1/bgpd.conf
Normal file
16
tests/topotests/ospf-sr-te-topo1/rt1/bgpd.conf
Normal file
@ -0,0 +1,16 @@
|
||||
log file bgpd.log
|
||||
!
|
||||
router bgp 1
|
||||
bgp router-id 1.1.1.1
|
||||
neighbor 6.6.6.6 remote-as 1
|
||||
neighbor 6.6.6.6 update-source lo
|
||||
!
|
||||
address-family ipv4 unicast
|
||||
redistribute static
|
||||
neighbor 6.6.6.6 next-hop-self
|
||||
neighbor 6.6.6.6 route-map SET_SR_POLICY in
|
||||
exit-address-family
|
||||
!
|
||||
route-map SET_SR_POLICY permit 10
|
||||
set sr-te color 1
|
||||
!
|
||||
36
tests/topotests/ospf-sr-te-topo1/rt1/ospfd.conf
Normal file
36
tests/topotests/ospf-sr-te-topo1/rt1/ospfd.conf
Normal file
@ -0,0 +1,36 @@
|
||||
password 1
|
||||
hostname rt1
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-sw1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 1.1.1.1
|
||||
network 1.1.1.1/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
!ospf opaque-lsa
|
||||
mpls-te on
|
||||
mpls-te export
|
||||
mpls-te router-address 1.1.1.1
|
||||
router-info area 0.0.0.0
|
||||
passive-interface lo
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
!segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 1.1.1.1/32 index 10
|
||||
!
|
||||
27
tests/topotests/ospf-sr-te-topo1/rt1/pathd.conf
Normal file
27
tests/topotests/ospf-sr-te-topo1/rt1/pathd.conf
Normal file
@ -0,0 +1,27 @@
|
||||
log file pathd.log
|
||||
!
|
||||
hostname rt1
|
||||
!
|
||||
segment-routing
|
||||
traffic-eng
|
||||
mpls-te on
|
||||
mpls-te import ospfv2
|
||||
segment-list default
|
||||
index 10 nai adjacency 10.0.1.1 10.0.1.2
|
||||
index 20 nai adjacency 10.0.2.2 10.0.2.4
|
||||
index 30 nai adjacency 10.0.7.4 10.0.7.6
|
||||
|
||||
|
||||
!
|
||||
segment-list test
|
||||
index 10 nai adjacency 10.0.1.1 10.0.1.2
|
||||
index 20 nai adjacency 10.0.2.2 10.0.2.4
|
||||
index 30 nai adjacency 10.0.6.4 10.0.6.5
|
||||
index 40 nai adjacency 10.0.8.5 10.0.8.6
|
||||
!
|
||||
policy color 1 endpoint 6.6.6.6
|
||||
name default
|
||||
binding-sid 1111
|
||||
!
|
||||
!
|
||||
!
|
||||
@ -0,0 +1,13 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "6.6.6.6",
|
||||
"is-operational": false
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,20 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "6.6.6.6",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"discriminator": "*",
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,20 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "6.6.6.6",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"discriminator": "*",
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,25 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "6.6.6.6",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"discriminator": "*",
|
||||
"is-best-candidate-path": false
|
||||
},
|
||||
{
|
||||
"preference": 200,
|
||||
"discriminator": "*",
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
21
tests/topotests/ospf-sr-te-topo1/rt1/zebra.conf
Normal file
21
tests/topotests/ospf-sr-te-topo1/rt1/zebra.conf
Normal file
@ -0,0 +1,21 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt1
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 1.1.1.1/32
|
||||
!
|
||||
interface eth-sw1
|
||||
ip address 10.0.1.1/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
47
tests/topotests/ospf-sr-te-topo1/rt2/ospfd.conf
Normal file
47
tests/topotests/ospf-sr-te-topo1/rt2/ospfd.conf
Normal file
@ -0,0 +1,47 @@
|
||||
hostname rt2
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-sw1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt4-1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt4-2
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 2.2.2.2
|
||||
network 2.2.2.2/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
!ospf opaque-lsa
|
||||
mpls-te on
|
||||
!mpls-te export
|
||||
mpls-te router-address 2.2.2.2
|
||||
router-info area 0.0.0.0
|
||||
passive-interface lo
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
!segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 2.2.2.2/32 index 20
|
||||
!
|
||||
35
tests/topotests/ospf-sr-te-topo1/rt2/zebra.conf
Normal file
35
tests/topotests/ospf-sr-te-topo1/rt2/zebra.conf
Normal file
@ -0,0 +1,35 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt2
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 2.2.2.2/32
|
||||
!
|
||||
interface eth-sw1
|
||||
ip address 10.0.1.2/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!
|
||||
interface eth-rt4-1
|
||||
ip address 10.0.2.2/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!
|
||||
!
|
||||
interface eth-rt4-2
|
||||
ip address 10.0.3.2/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
46
tests/topotests/ospf-sr-te-topo1/rt3/ospfd.conf
Normal file
46
tests/topotests/ospf-sr-te-topo1/rt3/ospfd.conf
Normal file
@ -0,0 +1,46 @@
|
||||
hostname rt3
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-sw1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt5-1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt5-2
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 3.3.3.3
|
||||
network 3.3.3.3/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
!ospf opaque-lsa
|
||||
mpls-te on
|
||||
!mpls-te export
|
||||
mpls-te router-address 3.3.3.3
|
||||
router-info area 0.0.0.0
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
!segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 3.3.3.3/32 index 30
|
||||
!
|
||||
33
tests/topotests/ospf-sr-te-topo1/rt3/zebra.conf
Normal file
33
tests/topotests/ospf-sr-te-topo1/rt3/zebra.conf
Normal file
@ -0,0 +1,33 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt3
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 3.3.3.3/32
|
||||
!
|
||||
interface eth-sw1
|
||||
ip address 10.0.1.3/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
interface eth-rt5-1
|
||||
ip address 10.0.4.3/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
interface eth-rt5-2
|
||||
ip address 10.0.5.3/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
53
tests/topotests/ospf-sr-te-topo1/rt4/ospfd.conf
Normal file
53
tests/topotests/ospf-sr-te-topo1/rt4/ospfd.conf
Normal file
@ -0,0 +1,53 @@
|
||||
hostname rt4
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt2-1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt2-2
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt5
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt6
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 4.4.4.4
|
||||
network 4.4.4.4/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
!ospf opaque-lsa
|
||||
mpls-te on
|
||||
!mpls-te export
|
||||
mpls-te router-address 4.4.4.4
|
||||
router-info area 0.0.0.0
|
||||
passive-interface lo
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
!segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 4.4.4.4/32 index 40
|
||||
!
|
||||
43
tests/topotests/ospf-sr-te-topo1/rt4/zebra.conf
Normal file
43
tests/topotests/ospf-sr-te-topo1/rt4/zebra.conf
Normal file
@ -0,0 +1,43 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt4
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 4.4.4.4/32
|
||||
!
|
||||
interface eth-rt2-1
|
||||
ip address 10.0.2.4/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt2-2
|
||||
ip address 10.0.3.4/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt5
|
||||
ip address 10.0.6.4/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt6
|
||||
ip address 10.0.7.4/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
53
tests/topotests/ospf-sr-te-topo1/rt5/ospfd.conf
Normal file
53
tests/topotests/ospf-sr-te-topo1/rt5/ospfd.conf
Normal file
@ -0,0 +1,53 @@
|
||||
hostname rt5
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt3-1
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt3-2
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt4
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt6
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 5.5.5.5
|
||||
network 5.5.5.5/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
! ospf opaque-lsa
|
||||
mpls-te on
|
||||
! mpls-te export
|
||||
mpls-te router-address 5.5.5.5
|
||||
router-info area 0.0.0.0
|
||||
passive-interface lo
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
! segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 5.5.5.5/32 index 50
|
||||
!
|
||||
43
tests/topotests/ospf-sr-te-topo1/rt5/zebra.conf
Normal file
43
tests/topotests/ospf-sr-te-topo1/rt5/zebra.conf
Normal file
@ -0,0 +1,43 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt5
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 5.5.5.5/32
|
||||
!
|
||||
interface eth-rt3-1
|
||||
ip address 10.0.4.5/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt3-2
|
||||
ip address 10.0.5.5/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt4
|
||||
ip address 10.0.6.5/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt6
|
||||
ip address 10.0.8.5/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
line vty
|
||||
!
|
||||
12
tests/topotests/ospf-sr-te-topo1/rt6/bgpd.conf
Normal file
12
tests/topotests/ospf-sr-te-topo1/rt6/bgpd.conf
Normal file
@ -0,0 +1,12 @@
|
||||
log file bgpd.log
|
||||
!
|
||||
router bgp 1
|
||||
bgp router-id 6.6.6.6
|
||||
neighbor 1.1.1.1 remote-as 1
|
||||
neighbor 1.1.1.1 update-source lo
|
||||
!
|
||||
address-family ipv4 unicast
|
||||
redistribute static
|
||||
neighbor 1.1.1.1 next-hop-self
|
||||
exit-address-family
|
||||
!
|
||||
41
tests/topotests/ospf-sr-te-topo1/rt6/ospfd.conf
Normal file
41
tests/topotests/ospf-sr-te-topo1/rt6/ospfd.conf
Normal file
@ -0,0 +1,41 @@
|
||||
hostname rt6
|
||||
log file ospfd.log
|
||||
!
|
||||
debug ospf sr
|
||||
debug ospf te
|
||||
debug ospf event
|
||||
debug ospf lsa
|
||||
debug ospf zebra
|
||||
!
|
||||
interface lo
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt4
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
interface eth-rt5
|
||||
ip ospf network point-to-point
|
||||
ip ospf hello-interval 2
|
||||
ip ospf dead-interval 10
|
||||
ip ospf area 0.0.0.0
|
||||
!
|
||||
router ospf
|
||||
ospf router-id 6.6.6.6
|
||||
network 6.6.6.6/32 area 0.0.0.0
|
||||
network 10.0.0.0/16 area 0.0.0.0
|
||||
capability opaque
|
||||
! ospf opaque-lsa
|
||||
mpls-te on
|
||||
mpls-te export
|
||||
mpls-te router-address 6.6.6.6
|
||||
router-info area 0.0.0.0
|
||||
passive-interface lo
|
||||
segment-routing on
|
||||
segment-routing global-block 16000 23999
|
||||
! segment-routing local-block 15000 15999
|
||||
segment-routing node-msd 8
|
||||
segment-routing prefix 6.6.6.6/32 index 60
|
||||
!
|
||||
25
tests/topotests/ospf-sr-te-topo1/rt6/pathd.conf
Normal file
25
tests/topotests/ospf-sr-te-topo1/rt6/pathd.conf
Normal file
@ -0,0 +1,25 @@
|
||||
log file pathd.log
|
||||
!
|
||||
hostname rt6
|
||||
!
|
||||
segment-routing
|
||||
traffic-eng
|
||||
mpls-te on
|
||||
mpls-te import ospfv2
|
||||
segment-list default
|
||||
index 10 nai adjacency 10.0.7.6 10.0.7.4
|
||||
index 20 nai adjacency 10.0.2.4 10.0.2.2
|
||||
index 30 nai adjacency 10.0.1.2 10.0.1.1
|
||||
!
|
||||
segment-list test
|
||||
index 10 nai adjacency 10.0.8.6 10.0.8.5
|
||||
index 20 nai adjacency 10.0.6.5 10.0.6.4
|
||||
index 30 nai adjacency 10.0.2.4 10.0.2.2
|
||||
index 40 nai adjacency 10.0.1.2 10.0.1.1
|
||||
!
|
||||
policy color 1 endpoint 1.1.1.1
|
||||
name default
|
||||
binding-sid 6666
|
||||
!
|
||||
!
|
||||
!
|
||||
@ -0,0 +1,13 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "1.1.1.1",
|
||||
"is-operational": false
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,19 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "1.1.1.1",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,19 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "1.1.1.1",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,23 @@
|
||||
{
|
||||
"frr-pathd:pathd": {
|
||||
"srte": {
|
||||
"policy": [
|
||||
{
|
||||
"color": 1,
|
||||
"endpoint": "1.1.1.1",
|
||||
"is-operational": true,
|
||||
"candidate-path": [
|
||||
{
|
||||
"preference": 100,
|
||||
"is-best-candidate-path": false
|
||||
},
|
||||
{
|
||||
"preference": 200,
|
||||
"is-best-candidate-path": true
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
38
tests/topotests/ospf-sr-te-topo1/rt6/zebra.conf
Normal file
38
tests/topotests/ospf-sr-te-topo1/rt6/zebra.conf
Normal file
@ -0,0 +1,38 @@
|
||||
log file zebra.log
|
||||
!
|
||||
hostname rt6
|
||||
!
|
||||
debug zebra kernel
|
||||
debug zebra packet
|
||||
debug zebra mpls
|
||||
!
|
||||
interface lo
|
||||
ip address 6.6.6.6/32
|
||||
!
|
||||
interface eth-rt4
|
||||
ip address 10.0.7.6/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-rt5
|
||||
ip address 10.0.8.6/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
interface eth-dst
|
||||
ip address 10.0.11.1/24
|
||||
link-params
|
||||
enable
|
||||
exit-link-params
|
||||
!!
|
||||
!
|
||||
ip forwarding
|
||||
!
|
||||
ip route 9.9.9.2/32 10.0.11.2
|
||||
!
|
||||
line vty
|
||||
!
|
||||
640
tests/topotests/ospf-sr-te-topo1/test_ospf_sr_te_topo1.py
Executable file
640
tests/topotests/ospf-sr-te-topo1/test_ospf_sr_te_topo1.py
Executable file
@ -0,0 +1,640 @@
|
||||
#!/usr/bin/env python
|
||||
|
||||
#
|
||||
# test_ospf_sr_te_topo1.py
|
||||
#
|
||||
# Copyright (c) 2021 by
|
||||
# Volta Networks
|
||||
#
|
||||
# Permission to use, copy, modify, and/or distribute this software
|
||||
# for any purpose with or without fee is hereby granted, provided
|
||||
# that the above copyright notice and this permission notice appear
|
||||
# in all copies.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS" AND NETDEF DISCLAIMS ALL WARRANTIES
|
||||
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NETDEF BE LIABLE FOR
|
||||
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
|
||||
# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
|
||||
# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
|
||||
# OF THIS SOFTWARE.
|
||||
#
|
||||
|
||||
"""
|
||||
test_ospf_sr_te_topo1.py:
|
||||
|
||||
+---------+
|
||||
| |
|
||||
| RT1 |
|
||||
| 1.1.1.1 |
|
||||
| |
|
||||
+---------+
|
||||
|eth-sw1
|
||||
|
|
||||
|
|
||||
|
|
||||
+---------+ | +---------+
|
||||
| | | | |
|
||||
| RT2 |eth-sw1 | eth-sw1| RT3 |
|
||||
| 2.2.2.2 +----------+ + 3.3.3.3 |
|
||||
| | 10.0.1.0/24 | |
|
||||
+---------+ +---------+
|
||||
eth-rt4-1| eth-rt5-1| |eth-rt5-2
|
||||
| | |
|
||||
10.0.2.0/24| 10.0.4.0/24| |10.0.5.0/24
|
||||
| | |
|
||||
eth-rt2-1| eth-rt3-1| |eth-rt3-2
|
||||
+---------+ +---------+
|
||||
| | | |
|
||||
| RT4 | 10.0.6.0/24 | RT5 |
|
||||
| 4.4.4.4 +---------------------+ 5.5.5.5 |
|
||||
| |eth-rt5 eth-rt4| |
|
||||
+---------+ +---------+
|
||||
eth-rt6| |eth-rt6
|
||||
| |
|
||||
10.0.7.0/24| |10.0.8.0/24
|
||||
| +---------+ |
|
||||
| | | |
|
||||
| | RT6 | |
|
||||
+----------+ 6.6.6.6 +-----------+
|
||||
eth-rt4| |eth-rt5
|
||||
+---------+
|
||||
|eth-dst (.1)
|
||||
|
|
||||
|10.0.11.0/24
|
||||
|
|
||||
|eth-rt6 (.2)
|
||||
+---------+
|
||||
| |
|
||||
| DST |
|
||||
| 9.9.9.2 |
|
||||
| |
|
||||
+---------+
|
||||
|
||||
"""
|
||||
|
||||
import os
|
||||
import sys
|
||||
import pytest
|
||||
import json
|
||||
import re
|
||||
from time import sleep
|
||||
from functools import partial
|
||||
|
||||
# Save the Current Working Directory to find configuration files.
|
||||
CWD = os.path.dirname(os.path.realpath(__file__))
|
||||
sys.path.append(os.path.join(CWD, "../"))
|
||||
|
||||
# pylint: disable=C0413
|
||||
# Import topogen and topotest helpers
|
||||
from lib import topotest
|
||||
from lib.topogen import Topogen, TopoRouter, get_topogen
|
||||
from lib.topolog import logger
|
||||
|
||||
# Required to instantiate the topology builder class.
|
||||
from mininet.topo import Topo
|
||||
|
||||
pytestmark = [pytest.mark.bgpd, pytest.mark.ospfd, pytest.mark.pathd]
|
||||
|
||||
|
||||
class TemplateTopo(Topo):
|
||||
"Test topology builder"
|
||||
|
||||
def build(self, *_args, **_opts):
|
||||
"Build function"
|
||||
tgen = get_topogen(self)
|
||||
|
||||
#
|
||||
# Define FRR Routers
|
||||
#
|
||||
for router in ["rt1", "rt2", "rt3", "rt4", "rt5", "rt6", "dst"]:
|
||||
tgen.add_router(router)
|
||||
|
||||
#
|
||||
# Define connections
|
||||
#
|
||||
switch = tgen.add_switch("s1")
|
||||
switch.add_link(tgen.gears["rt1"], nodeif="eth-sw1")
|
||||
switch.add_link(tgen.gears["rt2"], nodeif="eth-sw1")
|
||||
#switch.add_link(tgen.gears["rt3"], nodeif="eth-sw1")
|
||||
|
||||
switch = tgen.add_switch("s2")
|
||||
switch.add_link(tgen.gears["rt2"], nodeif="eth-rt4-1")
|
||||
switch.add_link(tgen.gears["rt4"], nodeif="eth-rt2-1")
|
||||
|
||||
#switch = tgen.add_switch("s3")
|
||||
#switch.add_link(tgen.gears["rt2"], nodeif="eth-rt4-2")
|
||||
#switch.add_link(tgen.gears["rt4"], nodeif="eth-rt2-2")
|
||||
|
||||
switch = tgen.add_switch("s4")
|
||||
switch.add_link(tgen.gears["rt3"], nodeif="eth-rt5-1")
|
||||
switch.add_link(tgen.gears["rt5"], nodeif="eth-rt3-1")
|
||||
|
||||
switch = tgen.add_switch("s5")
|
||||
switch.add_link(tgen.gears["rt3"], nodeif="eth-rt5-2")
|
||||
switch.add_link(tgen.gears["rt5"], nodeif="eth-rt3-2")
|
||||
|
||||
switch = tgen.add_switch("s6")
|
||||
switch.add_link(tgen.gears["rt4"], nodeif="eth-rt5")
|
||||
switch.add_link(tgen.gears["rt5"], nodeif="eth-rt4")
|
||||
|
||||
switch = tgen.add_switch("s7")
|
||||
switch.add_link(tgen.gears["rt4"], nodeif="eth-rt6")
|
||||
switch.add_link(tgen.gears["rt6"], nodeif="eth-rt4")
|
||||
|
||||
switch = tgen.add_switch("s8")
|
||||
switch.add_link(tgen.gears["rt5"], nodeif="eth-rt6")
|
||||
switch.add_link(tgen.gears["rt6"], nodeif="eth-rt5")
|
||||
|
||||
switch = tgen.add_switch("s9")
|
||||
switch.add_link(tgen.gears["rt6"], nodeif="eth-dst")
|
||||
switch.add_link(tgen.gears["dst"], nodeif="eth-rt6")
|
||||
|
||||
|
||||
def setup_module(mod):
|
||||
"Sets up the pytest environment"
|
||||
|
||||
tgen = Topogen(TemplateTopo, mod.__name__)
|
||||
|
||||
frrdir = tgen.config.get(tgen.CONFIG_SECTION, "frrdir")
|
||||
if not os.path.isfile(os.path.join(frrdir, "pathd")):
|
||||
pytest.skip("pathd daemon wasn't built in:"+frrdir)
|
||||
|
||||
tgen.start_topology()
|
||||
|
||||
router_list = tgen.routers()
|
||||
|
||||
# For all registered routers, load the zebra configuration file
|
||||
for rname, router in router_list.items():
|
||||
router.load_config(
|
||||
TopoRouter.RD_ZEBRA, os.path.join(CWD, "{}/zebra.conf".format(rname))
|
||||
)
|
||||
router.load_config(
|
||||
TopoRouter.RD_OSPF, os.path.join(CWD, "{}/ospfd.conf".format(rname))
|
||||
)
|
||||
router.load_config(
|
||||
TopoRouter.RD_PATH, os.path.join(CWD, "{}/pathd.conf".format(rname))
|
||||
)
|
||||
router.load_config(
|
||||
TopoRouter.RD_BGP, os.path.join(CWD, "{}/bgpd.conf".format(rname))
|
||||
)
|
||||
|
||||
tgen.start_router()
|
||||
|
||||
|
||||
def teardown_module(mod):
|
||||
"Teardown the pytest environment"
|
||||
tgen = get_topogen()
|
||||
|
||||
# This function tears down the whole topology.
|
||||
tgen.stop_topology()
|
||||
|
||||
|
||||
def setup_testcase(msg):
|
||||
logger.info(msg)
|
||||
tgen = get_topogen()
|
||||
|
||||
# Skip if previous fatal error condition is raised
|
||||
if tgen.routers_have_failure():
|
||||
pytest.skip(tgen.errors)
|
||||
|
||||
return tgen
|
||||
|
||||
|
||||
def print_cmd_result(rname, command):
|
||||
print(get_topogen().gears[rname].vtysh_cmd(command, isjson=False))
|
||||
|
||||
|
||||
def compare_json_test(router, command, reference, exact):
|
||||
output = router.vtysh_cmd(command, isjson=True)
|
||||
result = topotest.json_cmp(output, reference)
|
||||
|
||||
# Note: topotest.json_cmp() just checks on inclusion of keys.
|
||||
# For exact matching also compare the other way around.
|
||||
if not result and exact:
|
||||
return topotest.json_cmp(reference, output)
|
||||
else:
|
||||
return result
|
||||
|
||||
|
||||
def cmp_json_output(rname, command, reference, exact=False):
|
||||
"Compare router JSON output"
|
||||
|
||||
logger.info('Comparing router "%s" "%s" output', rname, command)
|
||||
|
||||
tgen = get_topogen()
|
||||
filename = "{}/{}/{}".format(CWD, rname, reference)
|
||||
expected = json.loads(open(filename).read())
|
||||
|
||||
# Run test function until we get an result. Wait at most 60 seconds.
|
||||
test_func = partial(compare_json_test, tgen.gears[rname], command, expected, exact)
|
||||
_, diff = topotest.run_and_expect(test_func, None, count=60, wait=0.5)
|
||||
assertmsg = '"{}" JSON output mismatches the expected result'.format(rname)
|
||||
assert diff is None, assertmsg
|
||||
|
||||
|
||||
def cmp_json_output_exact(rname, command, reference):
|
||||
return cmp_json_output(rname, command, reference, True)
|
||||
|
||||
|
||||
def add_candidate_path(rname, endpoint, pref, name, segment_list="default"):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "policy color 1 endpoint """
|
||||
+ endpoint
|
||||
+ """" \
|
||||
-c "candidate-path preference """
|
||||
+ str(pref)
|
||||
+ """ name """
|
||||
+ name
|
||||
+ """ explicit segment-list """
|
||||
+ segment_list
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def delete_candidate_path(rname, endpoint, pref):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "policy color 1 endpoint """
|
||||
+ endpoint
|
||||
+ """" \
|
||||
-c "no candidate-path preference """
|
||||
+ str(pref)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def add_segment(rname, name, index, label):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "segment-list """
|
||||
+ name
|
||||
+ """" \
|
||||
-c "index """
|
||||
+ str(index)
|
||||
+ """ mpls label """
|
||||
+ str(label)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def delete_segment(rname, name, index):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "segment-list """
|
||||
+ name
|
||||
+ """" \
|
||||
-c "no index """
|
||||
+ str(index)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def add_segment_adj(rname, name, index, src, dst):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "segment-list """
|
||||
+ name
|
||||
+ """" \
|
||||
-c "index """
|
||||
+ str(index)
|
||||
+ """ nai adjacency """
|
||||
+ str(src)
|
||||
+ """ """
|
||||
+ str(dst)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def create_sr_policy(rname, endpoint, bsid):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "policy color 1 endpoint """
|
||||
+ endpoint
|
||||
+ """" \
|
||||
-c "name default" \
|
||||
-c "binding-sid """
|
||||
+ str(bsid)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def delete_sr_policy(rname, endpoint):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "segment-routing" \
|
||||
-c "traffic-eng" \
|
||||
-c "no policy color 1 endpoint """
|
||||
+ endpoint
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def create_prefix_sid(rname, prefix, sid):
|
||||
get_topogen().net[rname].cmd(
|
||||
""" \
|
||||
vtysh -c "conf t" \
|
||||
-c "router ospf " \
|
||||
-c "segment-routing prefix """
|
||||
+ prefix
|
||||
+ " index "
|
||||
+ str(sid)
|
||||
+ '''"'''
|
||||
)
|
||||
|
||||
|
||||
def delete_prefix_sid(rname, prefix):
|
||||
get_topogen().net[rname].cmd(
|
||||
''' \
|
||||
vtysh -c "conf t" \
|
||||
-c "router ospf " \
|
||||
-c "no segment-routing prefix "'''
|
||||
+ prefix
|
||||
)
|
||||
|
||||
|
||||
def check_bsid(rt, bsid, fn_name, positive):
|
||||
"""
|
||||
Search for a bsid in rt1 and rt6
|
||||
Positive means that check is true is bsid is found
|
||||
Positive="False" means that check is true is bsid is NOT found
|
||||
"""
|
||||
|
||||
logger.info('Checking "%s" bsid "%s" for router "%s" ', positive, bsid, rt)
|
||||
|
||||
count = 0
|
||||
candidate_key = bsid
|
||||
candidate_output = ""
|
||||
# First wait for convergence
|
||||
tgen = get_topogen()
|
||||
while count < 30:
|
||||
matched = False
|
||||
matched_key = False
|
||||
sleep(1)
|
||||
count += 1
|
||||
router = tgen.gears[rt]
|
||||
candidate_output = router.vtysh_cmd("show mpls table json")
|
||||
candidate_output_json = json.loads(candidate_output)
|
||||
for item in candidate_output_json.items():
|
||||
# logger.info('item "%s"', item)
|
||||
if item[0] == candidate_key:
|
||||
matched_key = True
|
||||
if positive:
|
||||
break
|
||||
if positive:
|
||||
if matched_key:
|
||||
matched = True
|
||||
assertmsg = "{} don't has entry {} but is was expected".format(
|
||||
router.name, candidate_key)
|
||||
else:
|
||||
if not matched_key:
|
||||
matched = True
|
||||
assertmsg = "{} has entry {} but is wans't expected".format(
|
||||
router.name, candidate_key)
|
||||
if matched:
|
||||
logger.info('Success "%s" in "%s"', router.name, fn_name)
|
||||
return
|
||||
assert matched, assertmsg
|
||||
|
||||
|
||||
#
|
||||
# Step 1
|
||||
#
|
||||
# Checking the MPLS table using a single SR Policy and a single Candidate Path
|
||||
# Segment list are base in adjacency that query TED
|
||||
#
|
||||
def test_srte_init_step1():
|
||||
setup_testcase("Test (step 1): wait OSPF convergence / label distribution")
|
||||
|
||||
check_bsid("rt1", "1111", test_srte_init_step1.__name__, False)
|
||||
check_bsid("rt6", "6666", test_srte_init_step1.__name__, False)
|
||||
|
||||
|
||||
def test_srte_add_candidate_check_mpls_table_step1():
|
||||
setup_testcase("Test (step 1): check MPLS table regarding the added Candidate Path")
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
|
||||
|
||||
def test_srte_reinstall_sr_policy_check_mpls_table_step1():
|
||||
setup_testcase(
|
||||
"Test (step 1): check MPLS table after the SR Policy was removed and reinstalled"
|
||||
)
|
||||
|
||||
for rname, endpoint, bsid in [("rt1", "6.6.6.6", 1111), ("rt6", "1.1.1.1", 6666)]:
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
delete_sr_policy(rname, endpoint)
|
||||
check_bsid(rname, bsid, test_srte_init_step1.__name__, False)
|
||||
create_sr_policy(rname, endpoint, bsid)
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
|
||||
|
||||
#
|
||||
# Step 2
|
||||
#
|
||||
# Checking pathd operational data using a single SR Policy and a single Candidate Path
|
||||
# Segment list are base in adjacency that query TED
|
||||
#
|
||||
def test_srte_bare_policy_step2():
|
||||
setup_testcase("Test (step 2): bare SR Policy should not be operational")
|
||||
|
||||
for rname in ["rt1", "rt6"]:
|
||||
cmp_json_output_exact(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step2/show_operational_data.ref",
|
||||
)
|
||||
|
||||
|
||||
def test_srte_add_candidate_check_operational_data_step2():
|
||||
setup_testcase(
|
||||
"Test (step 2): add single Candidate Path, SR Policy should be operational"
|
||||
)
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
cmp_json_output(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step2/show_operational_data_with_candidate.ref",
|
||||
)
|
||||
|
||||
|
||||
def test_srte_config_remove_candidate_check_operational_data_step2():
|
||||
setup_testcase(
|
||||
"Test (step 2): remove single Candidate Path, SR Policy should not be operational anymore"
|
||||
)
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
cmp_json_output_exact(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step2/show_operational_data.ref",
|
||||
)
|
||||
|
||||
|
||||
#
|
||||
# Step 3
|
||||
#
|
||||
# Testing the Candidate Path selection
|
||||
# Segment list are based in adjacencies resolved by query TED
|
||||
#
|
||||
def test_srte_add_two_candidates_step3():
|
||||
setup_testcase("Test (step 3): second Candidate Path has higher Priority")
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
for pref, cand_name in [("100", "first"), ("200", "second")]:
|
||||
add_candidate_path(rname, endpoint, pref, cand_name)
|
||||
cmp_json_output(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step3/show_operational_data_with_two_candidates.ref",
|
||||
)
|
||||
|
||||
# cleanup
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
for pref in ["100", "200"]:
|
||||
delete_candidate_path(rname, endpoint, pref)
|
||||
|
||||
|
||||
def test_srte_add_two_candidates_with_reverse_priority_step3():
|
||||
setup_testcase("Test (step 3): second Candidate Path has lower Priority")
|
||||
|
||||
# Use reversed priorities here
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
for pref, cand_name in [("200", "first"), ("100", "second")]:
|
||||
add_candidate_path(rname, endpoint, pref, cand_name)
|
||||
cmp_json_output(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step3/show_operational_data_with_two_candidates.ref",
|
||||
)
|
||||
|
||||
# cleanup
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
for pref in ["100", "200"]:
|
||||
delete_candidate_path(rname, endpoint, pref)
|
||||
|
||||
|
||||
def test_srte_remove_best_candidate_step3():
|
||||
setup_testcase("Test (step 3): delete the Candidate Path with higher priority")
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
for pref, cand_name in [("100", "first"), ("200", "second")]:
|
||||
add_candidate_path(rname, endpoint, pref, cand_name)
|
||||
|
||||
# Delete candidate with higher priority
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
delete_candidate_path(rname, endpoint, 200)
|
||||
|
||||
# Candidate with lower priority should get active now
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
cmp_json_output(
|
||||
rname,
|
||||
"show yang operational-data /frr-pathd:pathd pathd",
|
||||
"step3/show_operational_data_with_single_candidate.ref",
|
||||
)
|
||||
# cleanup
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
|
||||
|
||||
#
|
||||
# Step 4
|
||||
#
|
||||
# Checking MPLS table with a single SR Policy and a Candidate Path with different Segment Lists and other modifications
|
||||
# Segment list are base in adjacency that query TED
|
||||
#
|
||||
def test_srte_change_segment_list_check_mpls_table_step4():
|
||||
setup_testcase("Test (step 4): check MPLS table for changed Segment List")
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
# now change the segment list name
|
||||
add_candidate_path(rname, endpoint, 100, "default", "test")
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_segment(rname, "test", 10)
|
||||
delete_segment(rname, "test", 20)
|
||||
delete_segment(rname, "test", 30)
|
||||
delete_segment(rname, "test", 40)
|
||||
if rname == "rt1":
|
||||
add_segment_adj(rname, "test", 10, "10.0.1.1", "10.0.1.2")
|
||||
add_segment_adj(rname, "test", 20, "10.0.2.2", "10.0.2.4")
|
||||
add_segment_adj(rname, "test", 30, "10.0.6.4", "10.0.6.5")
|
||||
add_segment_adj(rname, "test", 40, "10.0.8.5", "10.0.8.6")
|
||||
else:
|
||||
add_segment_adj(rname, "test", 10, "10.0.8.6", "10.0.8.5")
|
||||
add_segment_adj(rname, "test", 20, "10.0.6.5", "10.0.6.4")
|
||||
add_segment_adj(rname, "test", 30, "10.0.2.4", "10.0.2.2")
|
||||
add_segment_adj(rname, "test", 40, "10.0.1.2", "10.0.1.1")
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
|
||||
|
||||
def test_srte_change_sl_priority_error_ted_check_mpls_table_step4():
|
||||
setup_testcase("Test (step 4): check MPLS table keeps low prio sl")
|
||||
|
||||
for rname, endpoint in [("rt1", "6.6.6.6"), ("rt6", "1.1.1.1")]:
|
||||
add_candidate_path(rname, endpoint, 100, "default")
|
||||
# now change the segment list name
|
||||
add_candidate_path(rname, endpoint, 200, "test", "test")
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_segment(rname, "test", 10)
|
||||
delete_segment(rname, "test", 20)
|
||||
delete_segment(rname, "test", 30)
|
||||
delete_segment(rname, "test", 40)
|
||||
# These won't resolv
|
||||
if rname == "rt1":
|
||||
add_segment_adj(rname, "test", 10, "10.0.1.99", "10.0.1.99")
|
||||
add_segment_adj(rname, "test", 20, "10.0.2.99", "10.0.2.99")
|
||||
add_segment_adj(rname, "test", 30, "10.0.6.99", "10.0.6.99")
|
||||
add_segment_adj(rname, "test", 40, "10.0.8.99", "10.0.8.99")
|
||||
else:
|
||||
add_segment_adj(rname, "test", 10, "10.0.8.99", "10.0.8.99")
|
||||
add_segment_adj(rname, "test", 20, "10.0.6.99", "10.0.6.99")
|
||||
add_segment_adj(rname, "test", 30, "10.0.2.99", "10.0.2.99")
|
||||
add_segment_adj(rname, "test", 40, "10.0.1.99", "10.0.1.99")
|
||||
# So policy sticks with default sl even higher prio
|
||||
check_bsid(rname, "1111" if rname == "rt1" else "6666", test_srte_init_step1.__name__, True)
|
||||
delete_candidate_path(rname, endpoint, 100)
|
||||
|
||||
|
||||
# Memory leak test template
|
||||
def test_memory_leak():
|
||||
"Run the memory leak test and report results."
|
||||
tgen = get_topogen()
|
||||
if not tgen.is_memleak_enabled():
|
||||
pytest.skip("Memory leak test/report is disabled")
|
||||
|
||||
tgen.report_memory_leaks()
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
args = ["-s"] + sys.argv[1:]
|
||||
sys.exit(pytest.main(args))
|
||||
Loading…
Reference in New Issue
Block a user