Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-12-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-11-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-10-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-9-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-8-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-7-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-6-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-5-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-4-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-3-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the tag for MDP interconnects to QCOM_ICC_TAG_ALWAYS, so that if
CPUSS collapses, the display may stay on.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-2-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
Fixes: cf85e9aee2 ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415130101.1429281-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "spin-table" enable-method requires "cpu-release-addr" property,
so add a dummy entry. It is assumed the bootloader will fill in the
correct values.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-6-63d7dc9ddd0a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "spin-table" enable-method requires "cpu-release-addr" property,
so add a dummy entry. It is assumed the bootloader will fill in the
correct values.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-5-63d7dc9ddd0a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The correct property name is 'qcom,freq-domain', not
'qcom,freq-domains'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-4-63d7dc9ddd0a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since commit 6fd8d2d275 ("ASoC: qcom: qdsp6: Move frontend AIFs to
q6asm-dai") from over 4 years ago the audio routes beween MM_DL* +
MultiMedia* Playback and MultiMedia* Capture + MM_UL* are not necessary
anymore and can be removed from the dts files. It also helps to stop
anyone copying these into new dts files.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250411-cleanup-mm-routes-v1-1-ba98f653aa69@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Particular device comes without headset combo jack, hence does not
feature wcd codec IC. In such cases, DMICs are powered from vreg_l1b.
Describe all 4 microphones in the audio routing. vdd-micb is defined
for lpass-macro already.
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250412124956.20562-1-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The RGMII interface is designed for speeds up to 1G. Phylink already
imposes the design limits for MII interfaces, and additional
specification is unnecessary. Therefore, we can remove this property
without any effect.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1u3bkm-000Epw-QU@rmk-PC.armlinux.org.uk
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-24-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-23-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-22-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-21-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-20-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-19-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-18-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-17-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-16-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-15-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-14-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-13-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-12-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-11-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-10-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-9-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-8-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-7-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-6-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-5-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-4-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the header with DSI phy clock IDs to make code more readable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-3-73b482a6dd02@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Changes queued for v6.15 would have had the potential to break
bisectability and was therefor not accepted. Merge the whole set towards
v6.16, as this is no longer a concern.
Highlights:
- alienware-wmi: Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities: Support for mic & audio mute LEDs
- samsung-galaxybook: Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl: RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Add a state container for LED control feature
- Add a state container for thermal control methods
- Add alienware-wmi.h
- Add WMI Drivers
- Refactor hdmi, amplifier, deepslp methods
- Refactor LED control methods
- Refactor thermal control methods
- Rename alienware-wmi.c
- Split DMI table
- Split the alienware-wmi driver
- Update alienware-wmi config entries
- Update header and module information
amd/pmc:
- fix leak in probe()
- Move macros and structures to the PMC header file
- Notify user when platform does not support s0ix transition
- Remove unnecessary line breaks
- Use managed APIs for mutex
amd/pmf:
- convert timeouts to secs_to_jiffies()
amd:
- Use *-y instead of *-objs in Makefiles
arm64:
- add Huawei Matebook E Go EC driver
arm64: dts: qcom: gaokun3:
- Add Embedded Controller node
compal-laptop:
- Do not include <linux/fb.h>
dell-ddv:
- Fix temperature calculation
- Use devm_battery_hook_register
- Use the power supply extension mechanism
dell: dell-wmi-sysman:
- Use *-y instead of *-objs in Makefile
dell:
- Modify Makefile alignment
- Use *-y instead of *-objs in Makefile
dell-uart-backlight:
- Make dell_uart_bl_serdev_driver static
dt-bindings: platform:
- Add Huawei Matebook E Go EC
hp-bioscfg:
- Replace deprecated strncpy() with strscpy()
- Use wmi_instance_count()
hp:
- Use *-y instead of *-objs in Makefile
hwmon:
- (hp-wmi-sensors) Use the WMI bus API when accessing sensors
ideapad-laptop:
- use dev_groups to register attribute groups
int3472:
- Call "func" "con_id" instead
intel/pmc:
- Add Arrow Lake U/H support to intel_pmc_core driver
- Add Panther Lake support to intel_pmc_core
- Create generic_core_init() for all platforms
- Make tgl_core_generic_init() static
- Move arch specific action to init function
- Remove duplicate enum
- Remove simple init functions
- Remove unnecessary declarations in header
- Remove unneeded extern keyword in header
intel:
- Use *-y instead of *-objs in Makefile
irqdomain: platform/x86:
- Switch to irq_domain_create_linear()
lenovo-wmi-hotkey-utilities.c:
- Support for mic and audio mute LEDs
lenovo-yoga-tab2-pro-1380-fastcharger:
- Make symbol static
MAINTAINERS:
- Add documentation reference for Mellanox platform
- Update ALIENWARE WMI DRIVER entry
mellanox:
- Relocate mlx-platform driver
mlxbf-bootctl:
- Support sysfs entries for RTC battery status
mlx-platform:
- Change register name
- Cosmetic changes
samsung-galaxybook:
- Add samsung-galaxybook driver
- Fix block_recording not supported logic
sonypi:
- Use str_on_off() helper in sonypi_display_info()
think-lmi:
- Use ACPI object when extracting strings
- Use WMI bus API when accessing BIOS settings
thinkpad_acpi:
- check the return value of devm_mutex_init()
- convert timeouts to secs_to_jiffies()
- Do not include <linux/fb.h>
- Move HWMON initialization to tpacpi_hwmon_pdriver's probe
- Move subdriver initialization to tpacpi_pdriver's probe.
tools/power/x86/intel-speed-select:
- Die ID for IO dies
- Fix the condition to check multi die system
- Prefix header search path with sysroot
- Prevent increasing MAX_DIE_PER_PACKAGE
- v1.22 release
wmi:
- Call WCxx methods when setting data blocks
- Rework WCxx/WExx ACPI method handling
- Update documentation regarding the GUID-based API
- Use devres to disable the WMI device
x86-android-tablets:
- Add select POWER_SUPPLY to Kconfig
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+QJyQAKCRBZrE9hU+XO
MUPYAP4sjtB8DKTIHgiQqado7PJZmdgpeJfAplitwKGe4BOcEQEA1mhuqMA5n6S+
jvbTtRF+jiKxis/5zAtAdChScM/pIgo=
=W+gy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
The ps8830 retimer reset is active low.
Fix up the retimer nodes which were based on an early version of the
driver which inverted the polarity.
Fixes: 019e1ee32f ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250318074907.13903-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add RPMh stats to read low power statistics for various subsystem
and SoC sleep modes.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250317-add_qcom_stats-v1-1-016ae05ac4b0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the nss clock controller found on ipq9574 based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-6-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On X1E based Windows on Arm machines the offset is stored in a Qualcomm
specific UEFI variable.
Unlike on previous platforms the alarm registers are also unaccessible
on X1E as they are owned by the ADSP.
Assume all X1E machines use similar firmware and enable the RTC in the
PMIC dtsi for now.
Based on a patch by Jonathan Marek. [1]
Link: https://lore.kernel.org/r/20241015004945.3676-4-jonathan@marek.ca # [1]
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Sebastian Reichel <sre@kernel.org> # Lenovo T14s Gen6
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219134118.31017-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
Switch to using the Qualcomm specific UEFI variable that is used by the
UEFI firmware (and Windows) to store the RTC offset.
This specifically means that the RTC time will be synchronised between
the UEFI firmware setup (or UEFI shell), Windows and Linux.
Note however that Windows stores the RTC time in local time by default,
while Linux typically uses UTC (i.e. as on X86).
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219134118.31017-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8650 the CPUs 0-1 are "silver" (Cortex-A520), CPU 2-6 are "gold"
(Cortex-A720) and CPU 7 is "gold-plus" (Cortex-X4).
So reference the correct "gold" idle-state for CPU core 2.
Fixes: d235037799 ("arm64: dts: qcom: add initial SM8650 dtsi")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250314-sm8650-cpu2-sleep-v1-1-31d5c7c87a5d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for wlan-2g LED on GPIO 42 and wps buttons on GPIO 19.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250120064508.2722341-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
USB phys in ipq9574 use the 'L5' regulator. The commit ec4f047679
("arm64: dts: qcom: ipq9574: Enable USB") incorrectly specified it as
'L2'. Because of this when the phy module turns off/on its regulators,
the wrong regulator is turned off/on resulting in 2 issues, namely the
correct regulator related to the USB phy is not turned off/on and the
module powered by the incorrect regulator is affected.
Fixes: ec4f047679 ("arm64: dts: qcom: ipq9574: Enable USB")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250207073545.1768990-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing HID supplies to avoid relying on other consumers to keep
them on.
This also avoids the following warnings on boot:
i2c_hid_of 0-0010: supply vdd not found, using dummy regulator
i2c_hid_of 0-0010: supply vddl not found, using dummy regulator
i2c_hid_of 1-0015: supply vdd not found, using dummy regulator
i2c_hid_of 1-002c: supply vdd not found, using dummy regulator
i2c_hid_of 1-0015: supply vddl not found, using dummy regulator
i2c_hid_of 1-002c: supply vddl not found, using dummy regulator
i2c_hid_of 1-003a: supply vdd not found, using dummy regulator
i2c_hid_of 1-003a: supply vddl not found, using dummy regulator
Note that VCC3B is also used for things like the modem which are not yet
described so mark the regulator as always-on for now.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: stable@vger.kernel.org # 6.12
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Cc: stable@vger.kernel.org # 6.8
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 6f18b8d414 ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Note that these supplies currently have no consumers described in
mainline.
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Cc: stable@vger.kernel.org # 6.13
Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Cc: stable@vger.kernel.org # 6.14
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: stable@vger.kernel.org # 6.12
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: bd50b1f5b6 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device")
Cc: stable@vger.kernel.org # 6.8
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the keypad volume-up key on the debug extension board.
This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250307171036.7276-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the X1E80100 CRD currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 4442a67eed ("arm64: dts: qcom: x1e80100-crd: add sound card")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-2-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the ThinkPad X13s currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 2e498f35c3 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since the Lenovo Thinkpad T14s Gen6 is available with an OLED, add
dedicated a dedicated dts for it.
This is needed because the backlight is handled differently for OLED
panels when compared to LCD ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-4-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to the fact that Lenovo Thinkpad T14s Gen6 is available with both
OLED and LCD, the backlight control differs HW-wise. For the LCD variant,
the panel's backlight is controlled via one of the PWMs provided by the
PMK8550 PMIC. For the OLED variant, the backlight is internal to the
panel and therefore it is not described in devicetree.
For this reason, create a generic dtsi for the T14s by renaming the
existing dts. While at it, add a node name to panel and drop the enable
gpio and pinctrl properties from the panel node. Then add the LCD variant
dts file with the old name and describe all backlight related nodes.
So the existing dts will now be used for LCD variant while for OLED new
dts will be added.
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-3-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the GT9897 touchscreen found on this smartphone connected
via SPI.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250312-fp5-touchscreen-v2-1-4bed270e0065@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the clocks property for the uart14 node to fix UART functionality
on QUP2_SE6. The current failure is due to an incorrect clocks assignment.
Change the clocks property to GCC_QUPV3_WRAP2_S6_CLK to resolve the issue.
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 068c3d3c83 ("arm64: dts: qcom: Add base SM8750 dtsi")
Link: https://lore.kernel.org/r/20250312104358.2558-1-quic_jseerapu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In IPQ5424, the bootloader collects the system RAM contents upon a crash
for post-morterm analysis. If we don't reserve the memory region used by
the bootloader, linux will consume it. Upon the next boot after a crash,
the bootloader will be loaded in the same region, which could lead to the
loss of some data. sometimes, we may miss out critical information.
Therefore, let's reserve the region used by the bootloader.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250312094948.3376126-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable secondary USB controller on QCS8300 Ride platform. Since it is a
Type-A port, the dr_mode has been set to "host". The VBUS to connected
peripherals is provided by TPS2559QWDRCTQ1 regulator connected to the
port. The regulator has an enable pin controlled by PMM8650. Model it as
fixed regulator and keep it Always-On at boot, since the regulator is
GPIO controlled regulator.
Co-developed-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Manish Nagar <quic_mnagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250310104743.976265-1-quic_mnagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a gpio-keys label for the lid-switch for consistency and to separate
it from the volume-up key (e.g. in /proc/interrupts).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250307171222.7470-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the keypad volume-up key on the debug extension board.
This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250307171222.7470-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The preemptively-merged node contains a property absent from the final
bindings. Remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: b16ee3d0cd ("arm64: dts: qcom: x1e80100-romulus: Set up PS8830s")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-10-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-8-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c300000: '#power-domain-cells' is a required property
Fixes: 0775021783 ("arm64: dts: qcom: qcs615: add AOSS_QMP node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-7-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 91f767eb69 ("arm64: dts: qcom: sdx75: Add AOSS node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-6-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
reworked the dt-bindings to accurately represent the hardware.
Execute the second half of the cleanup by wiring up the missing
pwr_event IRQ and adjusting the entry order.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-5-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC.
Defined features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- SD card
- SMD RPM regulators
- Volume Up, Down and Power buttons
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Link: https://lore.kernel.org/r/20250311003353.8250-3-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Decoder and encoder nodes are already deprecated from bindings. Update
the venus node to align with bindings. The nodes were deprecated with
commit 459997e899 ("media: dt-bindings: qcom-venus: Deprecate
video-decoder and video-encoder where applicable") and is part of
v6.14-rc1 and onwards.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250303-b4-media-v2-1-893651a4b1c7@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CTCU and ETR nodes in DT to enable related functionalities.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-11-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Audio DSP supports compressed playback on this SoC. It is required
to add compressed DAI and separate MultimeMedia DAI link to enable this.
Fcplay or cplay tools from tinycompress can playback, say, mp3 files:
fcplay -c 0 -d 3 test.mp3
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250228162308.388818-1-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PMUs shares the same per-cpu (PPI) interrupt, so declare the proper
interrupt partition maps and use the 4th interrupt cell to pass the
partition phandle for each ARM PMU node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-2-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ARM PMUs shares the same per-cpu (PPI) interrupt, so we need to switch
to interrupt-cells = <4> in the GIC node to allow adding an interrupt
partition map phandle as the 4th cell value for GIC_PPI interrupts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-1-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcs615 SoC has a True Random Number Generator, add the node
with the correct compatible set.
Signed-off-by: Abhinaba Rakshit <quic_arakshit@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250228-enable-trng-for-qcs615-v2-2-017aa858576e@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM8750 have two different clusters. cluster0 have CPU 0-5 as child and
cluster1 have CPU 6-7 as child. Each cluster requires its own idle state
and power domain in order to achieve complete domain sleep state.
However only single cluster idle state is added mapping CPU 0-7 to the
same power domain. Fix this by correctly mapping each CPU to respective
cluster power domain and make cluster1 power domain use same domain idle
state as cluster0 since both use same idle state parameters.
Fixes: 068c3d3c83 ("arm64: dts: qcom: Add base SM8750 dtsi")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226-sm8750_cluster_idle-v2-1-ef0ac81e242f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the Qualcomm SM8450 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-8-61a0fdfb75b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the Qualcomm AR2 Gen1 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-7-61a0fdfb75b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The `tx-sched-sp` property was removed in commit aed6864035 ("net:
stmmac: platform: Delete a redundant condition branch").
Therefore, it can be safely removed from the device tree.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250218125157.412701-1-prabhakar.csengg@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add PWM/LPG node to the PM8937 dtsi so devices
which use this block can enable them.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213-pm8937-pwm-v2-2-49ea59801a33@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MSI interrupt numbers of the PCIe3 controller are incorrect. Due
to this, the functional bring up of the QDSP6 processor on the PCIe
endpoint has failed. Correct the MSI interrupt numbers to properly
bring up the QDSP6 processor on the PCIe endpoint.
Fixes: d80c7fbfa9 ("arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313071422.510-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When num-channels and qcom,num-ees is not provided in devicetree, the
driver will try to read these values from the registers during probe but
this fails if the interconnect is not on and then crashes the system.
So we can provide these properties in devicetree (queried after patching
BAM driver to enable the necessary interconnect) so we can probe
cryptobam without reading registers and then also use the QCE as
expected.
Fixes: 4d29db2043 ("arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot")
Fixes: f1040a7fe8 ("arm64: dts: qcom: sm8350: Add Crypto Engine support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-1-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for the CDSP and its SMP2P. These are compatible with earlier
SM8650 with difference in one more interrupt.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-b4-sm8750-cdsp-v4-1-4925d607cea6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add LPASS macro codecs and LPASS TLMM pin controller on Qualcomm SM8750
for proper sound support. These are fully compatible with earlier SM8550.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-2-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for IPCC mailbox, SMP2P for ADSP, AOSS and the ADSP remoteproc
PAS loader (compatible with SM8550).
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-1-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. Firmware for boards here is not yet in
linux-firmware, but if it gets accepted it will be MBN, not MDT.
Change might affect users of DTS which rely on manually placed firmware
files, not coming from linux-firmware package.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250108120530.156928-1-krzysztof.kozlowski@linaro.org
[bjorn: Updated subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.
Fixes: d711b22eee ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-3-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.
Fixes: d711b22eee ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Fixes: d711b22eee ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-2-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo ThinkPad T14s Gen6 provides external DisplayPort on all
2 USB Type-C ports. Each one of this ports is connected to a dedicated
DisplayPort controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable the first and second DisplayPort controllers and limit their
data lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-4-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo ThinkPad T14s Gen6 laptop comes with 3 Parade PS8830 retimers,
one for each Type-C port. These handle the orientation and altmode
switching and are controlled over I2C. In the connection chain, they sit
between the USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out
endpoints.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-3-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite CRD provides external DisplayPort on all 3 USB Type-C ports.
Each one of this ports is connected to a dedicated DisplayPort
controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable all 3 remaining DisplayPort controllers and limit their data
lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-2-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each
Type-C port. These handle the orientation and altmode switching and are
controlled over I2C. In the connection chain, they sit between the
USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-1-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These regulators power some electronic components onboard. They're
most likely kept online by other pieces of firmware, but you can never
be sure enough.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250304-topic-sl7_vregs_aon-v1-1-b2dc706e4157@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Only CPU0 Embedded Trace Extension (ETE) was added, but there's one
for all 8 CPUs, so add the missing ones.
Fixes: 256e6937e4 ("arm64: dts: qcom: sm8650: Add coresight nodes")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250227-topic-sm8650-upstream-add-all-coresight-cpus-v3-1-48ae516be0d5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
combo chip using the new power sequencing bindings. All voltages are
derived from chained fixed regulators controlled using a single GPIO.
The same setup also works for CRD (and likely most of the other X1E80100
laptops). However, unlike the QCP they use soldered or removable M.2 cards
supplied by a single 3.3V fixed regulator. The other necessary voltages are
then derived inside the M.2 card. Describing this properly requires
new bindings, so this commit only adds QCP for now.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250217-x1e80100-pwrseq-qcp-v3-1-a0525cc01666@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add RPMh stats to read low power statistics for various subsystem
and SoC sleep modes.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # 8750 QRD
Link: https://lore.kernel.org/r/20250218-sm8750_stats-v1-1-8902e213f82d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There should be exactly one space before and after '=', and one space
before '{'. No functional impact. Verified with comparing decompiled
DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set the paths where the device-specific firmware can be found for this
device.
Fairphone 3 was shipped with secure-boot off so any testkey-signed
firmware is accepted.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-3-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Command DB is a database in the shared memory of QCOM SoCs, that
provides a mapping between resource key and the resource address for a
system resource managed by a remote processor. The data is stored in a
shared memory region and is loaded by the remote processor. Therefore,
enabling Command DB ensures that those resources function properly.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250221-add_command_db_support-v1-1-d60acbf913aa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-13-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-12-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-11-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-10-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-9-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-8-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-7-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-6-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-5-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-4-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-3-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-2-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-5-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-4-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Particular laptops comes with two USB Type-C ports, both supporting DP
alt mode. Enable output on both of them. Explicitly list supported
frequencies including HBR3/8.1Gbps for all external DisplayPort(s).
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
Derived from:
arm64: dts: qcom: x1e80100-t14s: Add external DP support
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initially added, the cma heap was supposed to help with libcamera swisp,
however a mistake was made such that the node was never applied as part
of the overlay since the change was added to the overlay root ("/") and
not with a reference to the target dtb root ("&{/}"). Moveover libcamera
doesn't require CMA heap on Qualcomm platforms anymore as it can now use
UDMA buffers instead.
Drop the CMA heap node. This change has no effect on the final dtb.
This reverts commit d40fd02c1f.
Fixes: d40fd02c1f ("arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support")
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250227-qcom-nonroot-overlays-v2-2-bde44f708cbe@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initially added, the cma heap was supposed to help with libcamera swisp,
however a mistake was made such that the node was never applied as part
of the overlay since the change was added to the overlay root ("/") and
not with a reference to the target dtb root ("&{/}"). Moveover libcamera
doesn't require CMA heap on Qualcomm platforms anymore as it can now use
UDMA buffers instead.
Drop the CMA heap node. This change has no effect on the final dtb.
This reverts commit 99d557cfe4.
Fixes: 99d557cfe4 ("arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support")
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250227-qcom-nonroot-overlays-v2-1-bde44f708cbe@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are currently two passive trip points defined for the CPU, but no
cooling devices are attached to the thermal zones. We don't have support
for cpufreq upstream yet, but actually this is redundant anyway because the
CPU is throttled automatically when reaching high temperatures.
Drop the passive trip points and keep just the critical shutdown as safety
measure in case the throttling fails.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-4-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures. With certain high GPU loads it is possible to
reach the critical hardware shutdown temperature of 120°C, endangering the
hardware and making it impossible to run certain applications.
Set up GPU cooling similar to the ACPI tables, by throttling the GPU speed
when reaching 95°C and polling every 200ms.
Cc: stable@vger.kernel.org
Fixes: 721e38301b ("arm64: dts: qcom: x1e80100: Add gpu support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-3-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The firmware configures the TSENS controller with a maximum temperature of
120°C. When reaching that temperature, the hardware automatically triggers
a reset of the entire platform. Some of the thermal zones in x1e80100.dtsi
use a critical trip point of 125°C. It's impossible to reach those.
It's preferable to shut down the system cleanly before reaching the
hardware trip point. Make the critical temperature trip points consistent
by setting all of them to 115°C and apply a consistent hysteresis.
The ACPI tables also specify 115°C as critical shutdown temperature.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-2-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A passive trip point at 125°C is pretty high, this is usually the
temperature for the critical shutdown trip point. Also, we don't have any
passive cooling devices attached to the video thermal zone.
Change this to be a critical trip point, and add a "hot" trip point at
90°C for consistency with the other thermal zones.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-1-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The bindings requires the mdp0-mem and the cpu-cfg interconnect path,
add the missing cpu-cfg path to fix the dtbs check error and also to ensure
that MDSS has enough bandwidth to let HLOS write config registers.
Fixes: 9fa33cbca3 ("arm64: dts: qcom: sm8650: correct MDSS interconnects")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250227-topic-sm8x50-mdss-interconnect-bindings-fix-v5-2-bf6233c6ebe5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The bindings requires the mdp0-mem and the cpu-cfg interconnect path,
add the missing cpu-cfg path to fix the dtbs check error and also to ensure
that MDSS has enough bandwidth to let HLOS write config registers.
Fixes: b8591df49c ("arm64: dts: qcom: sm8550: correct MDSS interconnects")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250227-topic-sm8x50-mdss-interconnect-bindings-fix-v5-1-bf6233c6ebe5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Embedded Controller in the Huawei Matebook E Go is accessible on &i2c15
and provides battery and adapter status, port orientation status, as well
as HPD event notifications for two USB Type-C port, etc.
Add the EC to the device tree and describe the relationship among
the type-c connectors, role switches, orientation switches and the QMP
combo PHY.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250214180656.28599-4-mitltlatltl@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is no such property as qcom,ath12k-calibration-variant: neither in
the bindings nor in the driver. See dtbs_check:
x1e80100-lenovo-yoga-slim7x.dtb: wifi@0: 'qcom,ath12k-calibration-variant' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225093051.58406-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Partially revert commit a86d844099 ("arm64: dts: qcom: qcs8300: add
QCrypto nodes") by dropping the untested QCE device node. Devicetree
bindings test failures were reported on mailing list on 16th of January
and after two weeks still no fixes:
qcs8300-ride.dtb: crypto@1dfa000: compatible: 'oneOf' conditional failed, one must be fixed:
...
'qcom,qcs8300-qce' is not one of ['qcom,ipq4019-qce', 'qcom,sm8150-qce']
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqL0HzzGXnCD+z4GASeXNsBxrdw8-qyfHj8S+C2ucK6EPQ@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250128115333.95021-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Partially revert commit 7ff3da43ef ("arm64: dts: qcom: sa8775p: add
QCrypto nodes") by dropping the untested QCE device node. Devicetree
bindings test failures were reported on mailing list on 16th of January
and after two weeks still no fixes:
sa8775p-ride.dtb: crypto@1dfa000: compatible: 'oneOf' conditional failed, one must be fixed:
...
'qcom,sa8775p-qce' is not one of ['qcom,ipq4019-qce', 'qcom,sm8150-qce']
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqJG_w9jyWjVR=QnPuJganG4uj9+9cEXZ__UAiCw2ZYZZA@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250128115333.95021-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add resets to eMMC/SD card blocks so linux can properly reset
them during initialization.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203063427.358327-4-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Swich to an OPP table for the UFS frequency scaling instead of
the deprecated freq-table-hz property.
The Operating Point table will also provide the associated
power domain level.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-10-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QUP Serial Engines requires different power domain level
depending on their working frequency, add the required OPP
table with the level associated with all possible frequencies.
For the "I2C Hub" serial engines, sinse they only support a
single Operating Point, only add a single power domain level
property.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-9-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe bus interconnect path can be scaled depending on the
PCIe link established, add the OPP table with all the possible
link speeds and the associated power domain level.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-8-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In all interconnect paths involving the cpu (MASTER_APPSS_PROC), use
the QCOM_ICC_TAG_ACTIVE_ONLY which will only retain the vote if
the CPU is online, leaving the firmware disabling the path when the
CPUs goes in suspend-idle.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-6-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QUP Serial Engines requires different power domain level
depending on their working frequency, add the required OPP
table with the level associated with all possible frequencies.
For the "I2C Hub" serial engines, sinse they only support a
single Operating Point, only add a single power domain level
property.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-4-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe bus interconnect path can be scaled depending on the
PCIe link established, add the OPP table with all the possible
link speeds and the associated power domain level.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-3-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In all interconnect paths involving the cpu (MASTER_APPSS_PROC), use
the QCOM_ICC_TAG_ACTIVE_ONLY which will only retain the vote if
the CPU is online, leaving the firmware disabling the path when the
CPUs goes in suspend-idle.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-2-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the proper QCOM_ICC_TAG_ define instead of passing 0 in all
interconnect paths phandle third argument.
Use QCOM_ICC_TAG_ALWAYS which is the fallback mask if 0 is used
as third phandle argument.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250115-topic-sm8x50-upstream-dt-icc-update-v1-1-eaa8b10e2af7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the MDSS nodes for the phone and add the panel node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20250202-fp5-display-v1-1-f52bf546e38f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the EEPROMs which are found on the different camera sensors on
this device.
The pull-up regulator for these I2C busses is vreg_cam_vio_1p8, the same
supply that powers VCC of all the EEPROMs.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20250203111429.22062-5-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Two regulators (GPIO 72 & 107) for the IMX766 sensor are missing here.
Without a driver, it's unclear if they're extra supplies or pwdn/power
GPIOs (labeled "custom" in the downstream kernel).
So add only those fixed regulators that are currently predictable for
camera sensors, camera EEPROMs and camera actuators.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20250203111429.22062-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove the remaining polling-delay-passive properties from
thermal nodes without a passive trip point.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-4-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While the CPUs thermal is handled by the LMH, and GPU has a passive
cooldowm via the HLOS DCVS, all the other thermal blocks only have
hot and critical and no passive/active trip points.
Passive or active thermal management for those blocks should
be either defined if somehow we can express those in DT or
in the board definition if there's an active cooling device
available.
The tsens MAX_THRESHOLD is set to 120C on those platforms, so set
the hot to 110C to leave a chance to HLOS to react and critical to
115C to avoid the monitor thermal shutdown.
In the case a passive or active cooling device would be
available, the downstream reference implementation uses
the 95C "tj" trip point, as we already use for the
gpuss thermal blocks.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-3-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the SM8650, the dynamic clock and voltage scaling (DCVS) for the GPU
is done from the HLOS, but the GPU can achieve a much higher temperature
before failing according the reference downstream implementation.
Set higher temperatures in the GPU trip points corresponding to
the temperatures provided by Qualcomm in the dowstream source, much
closer to the junction temperature and with a higher critical
temperature trip in the case the HLOS DCVS cannot handle the
temperature surge.
The tsens MAX_THRESHOLD is set to 120C on those platforms, so set
the hot to 110C to leave a chance to HLOS to react and critical to
115C to avoid the monitor thermal shutdown.
Fixes: 497624ed55 ("arm64: dts: qcom: sm8650: Throttle the GPU when overheating")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-2-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the SM8650, the dynamic clock and voltage scaling (DCVS) is done in an
hardware controlled loop using the LMH and EPSS blocks with constraints and
OPPs programmed in the board firmware.
Since the Hardware does a better job at maintaining the CPUs temperature
in an acceptable range by taking in account more parameters like the die
characteristics or other factory fused values, it makes no sense to try
and reproduce a similar set of constraints with the Linux cpufreq thermal
core.
In addition, the tsens IP is responsible for monitoring the temperature
across the SoC and the current settings will heavily trigger the tsens
UP/LOW interrupts if the CPU temperatures reaches the hardware thermal
constraints which are currently defined in the DT. And since the CPUs
are not hooked in the thermal trip points, the potential interrupts and
calculations are a waste of system resources.
Drop the current passive trip points and only leave the critical trip
point that will trigger a software system reboot before an hardware
thermal shutdown in the allmost impossible case the hardware DCVS cannot
handle the temperature surge.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-1-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X1 family is split into two parts: the 10- and 12-core parts are
variants of the same silicon with different fusing, whereas the 8-core
ones are a separate design. Thankfully, the software interface is only
barely different, letting us reuse much of the existing X1 work.
Introduce support for the X1P42100 SoC and the CRD based on it, through
overlaying some bits. Everything we already support on X1E80100 and
friends, minus the GPU, should work as-is.
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-6-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Asserting the NOCSR reset line keeps the PHY registers in tact.
This allows us to avoid programming long tables of magic values in the
operating system.
Wire up these resets to PCIe PHY4 and 5 (it's there on the others).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-4-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are reports that the pagetable walker cache coherency is not a
given across the spectrum of SDM845/850 devices, leading to lock-ups
and resets. It works fine on some devices (like the Dragonboard 845c,
but not so much on the Lenovo Yoga C630).
This unfortunately looks like a fluke in firmware development, where
likely somewhere in the vast hypervisor stack, a change to accommodate
for this was only introduced after the initial software release (which
often serves as a baseline for products).
Revert the change to avoid additional guesswork around crashes.
This reverts commit 6b31a9744b.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://lore.kernel.org/linux-arm-msm/20250215-yoga-dma-coherent-v1-1-2419ee184a81@linaro.org/
Fixes: 6b31a9744b ("arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-topic-845_smmu_not_coherent-v1-1-98ca9d17471c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add LDOA2 regulator from MP5496 to support SDCC voltage scaling.
Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-6-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the labels of mp5496 regulator from ipq6018 to mp5496.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250210070122.208842-5-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some IPQ60xx SoCs don't come with the mp5496 pmic chip. The mp5496
pmic was never part of the IPQ60xx SoC, it's optional, so we moved
it out of the soc dtsi.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-4-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The early version of IPQ6000 (SoC id: IPQ6018, SBL version:
BOOT.XF.0.3-00077-IPQ60xxLZB-2) and IPQ6005 SoCs can reach
a max frequency of 1.5GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-3-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The final version of IPQ6000 (SoC id: IPQ6000, SBL version:
BOOT.XF.0.3-00086-IPQ60xxLZB-1) has a max design frequency
of 1.2GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sa8775p-ride platform uses the QCA6698 Bluetooth chip. While the
QCA6698 shares the same IP core as the WCN6855, it has different RF
components and RAM sizes, requiring new firmware files. Use the
firmware-name property to specify the NVM and rampatch firmware to load.
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250110063914.28001-2-quic_chejiang@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make this USB controller consistent with the others on this platform.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250109205232.92336-1-kettenis@openbsd.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB5 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-2-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB3 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-1-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Link: https://lore.kernel.org/r/20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMU node for WCN6750 present on the qcs6490-rb3gen2
board and assign its power outputs to the Bluetooth module.
In WCN6750 module sw_ctrl and wifi-enable pins are handled
in the wifi controller firmware. Therefore, it is not required
to have those pins' entries in the PMU node.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250221171014.120946-2-quic_janathot@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OPP tables for each CPU clusters (cpu0-1, cpu2-3-4, cpu5-6 & cpu7)
to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
frequency by aggregating bandwidth requests of all CPU core with referenc
to the current OPP they are configured in by the LMH/EPSS hardware.
The effect is a proper caches & DDR frequency scaling when CPU cores
changes frequency.
The OPP tables were built using the downstream memlat ddr, llcc & l3
tables for each cluster types with the actual EPSS cpufreq LUT tables
from running HDK and QRD devices.
The cpu2 and cpu5 tables are similar but must be kept separate to
take in account that they define OPP for shared CPUs of two different
clusters that can scale separately, thus vote different bandwidths.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-3-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the interconnect entry for each cpu, with 3 different paths:
- CPU to Last Level Cache Controller (LLCC)
- Last Level Cache Controller (LLCC) to DDR
- L3 Cache from CPU to DDR interface
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-2-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite implements Server Base System Architecture (SBSA) specification
compliant generic watchdog.
Describe it.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250212-x1e80100-add-watchdog-v2-1-a73897f0dad5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for vadc and adc-tm channels which are used for
monitoring thermistors present on the platform.
- Add the necessary includes for qcom,spmi-adc7-pm7325 and
qcom,spmi-adc7-pmk8350.
- Add thermal zones for quiet-thermal, sdm-skin-thermal, and
xo-thermal, and define their polling delays and thermal sensors.
- Configure the pm7325_temp_alarm node to use the pmk8350_vadc
channel for thermal monitoring.
- Configure the pmk8350_adc_tm node to enable its thermal sensors
and define their registers and settings.
- Configure the pmk8350_vadc node to define its channels and settings
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212113342.873086-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.
Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).
example:
Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
Method (_PSV, 0, NotSerialized) // _PSV: Passive Temperature
{
Return (\_SB.TZ15.TPSV)
}
Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
Method (_CRT, 0, NotSerialized) // _CRT: Critical Temperature
{
Return (\_SB.TZ15.TCRT)
}
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250111083209.262269-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the binding for qcom,spmi-pmic-arb, the cell 1 should be
slave id, the slave id of pmc8280_2 is 3.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111083209.262269-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no use wasting power on keeping the links between the CPU and
something else online when the CPUs are online. Change the interconnect
tag for such paths, so that RPMh is requested to automatically
clock-gate those when possible.
Keeping these paths online is also a potential power collapse blocker,
however this commit alone doesn't magically fix all the remaining
TODOs related to suspend.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-2-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We see the addition of eleven new SoCs, including a total of sixx arm64
chips from Qualcomm alone. Overall, the Qualcomm platforms once again
make up the majority of all changes, after a couple of quieter releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of
the V4H (R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips
using Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial
IOT platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that
only need new devicetree files. Two additional SoCs in new
families are part of a separate branch.
There are 48 new machines in total, including six arm32 ones based
on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores,
and a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek,
Qualcomm, Renesas and Rockchips and cover development boards, phones,
laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features.
-----BEGIN PGP SIGNATURE-----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=vdmR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
Other x1e machines use _dtbs.elf for these firmwares, which matches the
filenames shipped by Windows.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250108124500.44011-1-joel@jms.id.au
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Samsung S6E88A0-AMS427AP24 panel to the device tree for the
Samsung Galaxy S4 Mini Value Edition. By default the panel displays
everything horizontally flipped, so add "flip-horizontal" to the panel
node to correct that.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Co-developed-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114220718.12248-1-jahau@rocketmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-3-4049cfccd073@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-2-4049cfccd073@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove properties which are both unused in the kernel and undocumented.
Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241115193435.3618831-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMI8950 LAB-IBB regulator nodes, with the
PMI8998 compatible as fallback.
The LAB-IBB regulators are used as panels supplies
on existing phones or tablets.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241115-topic-sdm450-upstream-lab-ibb-v1-1-8a8e74befbfe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable support for download mode to collect RAM dumps in case
of system crash, facilitating post mortem analysis.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204141416.1352545-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sm8250 SoC.
Fixes: 30325603b9 ("arm64: dts: qcom: sm8250: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sdm845 SoC.
Fixes: d48a6698a6 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the CAMSS device tree node for sc8280xp SoC.
Fixes: 5994dd6075 ("arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241127122950.885982-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable primary USB controller on QCS8300 Ride platform. The primary USB
controller is made "peripheral", as this is intended to be connected to
a host for debugging use cases.
For using the controller in host mode, changing the dr_mode and adding
appropriate pinctrl nodes to provide vbus would be sufficient.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For both the controller instances, size of the 'addr_space' region should
be 0x1fe00000 as per the hardware memory layout.
Otherwise, endpoint drivers cannot request even reasonable BAR size of 1MB.
Cc: stable@vger.kernel.org # 6.11
Fixes: c5f5de8434 ("arm64: dts: qcom: sa8775p: Add ep pcie1 controller node")
Fixes: 1924f55182 ("arm64: dts: qcom: sa8775p: Add ep pcie0 controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241231130224.38206-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPQ5424 SoC has both USB2.0 and USB3.0 controllers. The USB3.0
can connect to either of USB2.0 or USB3.0 phy and operate in the
respective mode.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241118052839.382431-7-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a DT node for Last level cache (aka. system cache) controller
which provides control over the last level cache present on
IPQ5424 SoCs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-4-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.
On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.
Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Lenovo ThinkPad T14s, the fingerprint reader placed in the power
button is connected via the usb_2 controller. The controller has only
a USB 2.0 PHY which is then connected via a NXP PTN3222 eUSB2 repeater,
which in turn is connected to the Goodix fingerprint reader.
So enable all the usb_2 controller and PHY nodes, set dual-role mode to
host and describe the eUSB2 repeater in order to get the fingerprint
reader discovered.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-t14-enable-fingerprint-sensor-v1-1-8fd911d39ad1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
