An IRS supports Logical Peripheral Interrupts (LPIs) and implement
Linux IPIs on top of it.
LPIs are used for interrupt signals that are translated by a
GICv5 ITS (Interrupt Translation Service) but also for software
generated IRQs - namely interrupts that are not driven by a HW
signal, ie IPIs.
LPIs rely on memory storage for interrupt routing and state.
LPIs state and routing information is kept in the Interrupt
State Table (IST).
IRSes provide support for 1- or 2-level IST tables configured
to support a maximum number of interrupts that depend on the
OS configuration and the HW capabilities.
On systems that provide 2-level IST support, always allow
the maximum number of LPIs; On systems with only 1-level
support, limit the number of LPIs to 2^12 to prevent
wasting memory (presumably a system that supports a 1-level
only IST is not expecting a large number of interrupts).
On a 2-level IST system, L2 entries are allocated on
demand.
The IST table memory is allocated using the kmalloc() interface;
the allocation required may be smaller than a page and must be
made up of contiguous physical pages if larger than a page.
On systems where the IRS is not cache-coherent with the CPUs,
cache mainteinance operations are executed to clean and
invalidate the allocated memory to the point of coherency
making it visible to the IRS components.
On GICv5 systems, IPIs are implemented using LPIs.
Add an LPI IRQ domain and implement an IPI-specific IRQ domain created
as a child/subdomain of the LPI domain to allocate the required number
of LPIs needed to implement the IPIs.
IPIs are backed by LPIs, add LPIs allocation/de-allocation
functions.
The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs.
Associate an IPI irqchip with IPI IRQ descriptors to provide
core code with the irqchip.ipi_send_single() method required
to raise an IPI.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 Interrupt Routing Service (IRS) component implements
interrupt management and routing in the GICv5 architecture.
A GICv5 system comprises one or more IRSes, that together
handle the interrupt routing and state for the system.
An IRS supports Shared Peripheral Interrupts (SPIs), that are
interrupt sources directly connected to the IRS; they do not
rely on memory for storage. The number of supported SPIs is
fixed for a given implementation and can be probed through IRS
IDR registers.
SPI interrupt state and routing are managed through GICv5
instructions.
Each core (PE in GICv5 terms) in a GICv5 system is identified with
an Interrupt AFFinity ID (IAFFID).
An IRS manages a set of cores that are connected to it.
Firmware provides a topology description that the driver uses
to detect to which IRS a CPU (ie an IAFFID) is associated with.
Use probeable information and firmware description to initialize
the IRSes and implement GICv5 IRS SPIs support through an
SPI-specific IRQ domain.
The GICv5 IRS driver:
- Probes IRSes in the system to detect SPI ranges
- Associates an IRS with a set of cores connected to it
- Adds an IRQchip structure for SPI handling
SPIs priority is set to a value corresponding to the lowest
permissible priority in the system (taking into account the
implemented priority bits of the IRS and CPU interface).
Since all IRQs are set to the same priority value, the value
itself does not matter as long as it is a valid one.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 CPU interface implements support for PE-Private Peripheral
Interrupts (PPI), that are handled (enabled/prioritized/delivered)
entirely within the CPU interface hardware.
To enable PPI interrupts, implement the baseline GICv5 host kernel
driver infrastructure required to handle interrupts on a GICv5 system.
Add the exception handling code path and definitions for GICv5
instructions.
Add GICv5 PPI handling code as a specific IRQ domain to:
- Set-up PPI priority
- Manage PPI configuration and state
- Manage IRQ flow handler
- IRQs allocation/free
- Hook-up a PPI specific IRQchip to provide the relevant methods
PPI IRQ priority is chosen as the minimum allowed priority by the
system design (after probing the number of priority bits implemented
by the CPU interface).
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-20-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture introduces two barriers instructions
(GSB SYS, GSB ACK) that are used to manage interrupt effects.
Rework macro used to emit the SB barrier instruction and implement
the GSB barriers on top of it.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-19-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The arm64 arch has relied so far on GIC architectural software
generated interrupt (SGIs) to handle IPIs. Those are per-cpu
software generated interrupts.
arm64 architecture code that allocates the IPIs virtual IRQs and
IRQ descriptors was written accordingly.
On GICv5 systems, IPIs are implemented using LPIs that are not
per-cpu interrupts - they are just normal routable IRQs.
Add arch code to set-up IPIs on systems where they are handled
using normal routable IRQs.
For those systems, force the IRQ affinity (and make it immutable)
to the cpu a given IRQ was assigned to.
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
[lpieralisi: changed affinity set-up, log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-18-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implement the GCIE capability as a strict boot cpu capability to
detect whether architectural GICv5 support is available in HW.
Plug it in with a naming consistent with the existing GICv3
CPU interface capability.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-17-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for adding a GICv5 CPU interface capability,
rework the existing GICv3 CPUIF capability - change its name and
description so that the subsequent GICv5 CPUIF capability
can be added with a more consistent naming on top.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-16-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
GICv5 trap configuration registers value is UNKNOWN at reset.
Initialize GICv5 EL2 trap configuration registers to prevent
trapping GICv5 instruction/register access upon entering the
kernel.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-15-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add field reporting the GCIE feature to ID_AA64PFR2_EL1 sysreg.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-2-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Fix the compatible string, node label and pinmux function name to match
what the datasheets use. A change to the device tree binding is sent
separately.
Fixes: 56766ca6c4 ("arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC")
Fixes: acca163f3f ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Link: https://patch.msgid.link/20250628054438.2864220-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
While BRBE can record branches within guests, the host recording
branches in guests is not supported by perf (though events are).
Support for BRBE in guests will supported by providing direct access
to BRBE within the guests. That is how x86 LBR works for guests.
Therefore, BRBE needs to be disabled on guest entry and restored on
exit.
For nVHE, this requires explicit handling for guests. Before
entering a guest, save the BRBE state and disable the it. When
returning to the host, restore the state.
For VHE, it is not necessary. We initialize
BRBCR_EL1.{E1BRE,E0BRE}=={0,0} at boot time, and HCR_EL2.TGE==1 while
running in the host. We configure BRBCR_EL2.{E2BRE,E0HBRE} to enable
branch recording in the host. When entering the guest, we set
HCR_EL2.TGE==0 which means BRBCR_EL1 is used instead of BRBCR_EL2.
Consequently for VHE, BRBE recording is disabled at EL1 and EL0 when
running a guest.
Should recording in guests (by the host) ever be desired, the perf ABI
will need to be extended to distinguish guest addresses (struct
perf_branch_entry.priv) for starters. BRBE records would also need to be
invalidated on guest entry/exit as guest/host EL1 and EL0 records can't
be distinguished.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-3-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
To use the Branch Record Buffer Extension (BRBE), some configuration is
necessary at EL3 and EL2. This patch documents the requirements and adds
the initial EL2 setup code, which largely consists of configuring the
fine-grained traps and initializing a couple of BRBE control registers.
Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and
HDFGWTR_EL2 with the same value, relying on the read/write trap controls
for a register occupying the same bit position in either register. The
'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit
59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds.
To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit
layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and
HDFGWTR_EL2 control bits separately. While making this change the
open-coded value (1 << 62) is replaced with
HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK.
The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special
initialisation: even though they are subject to E2H renaming, both have
an effect regardless of HCR_EL2.TGE, even when running at EL2. So we
must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled
in __init_el2_brbe() with a comment to explain the situation.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Mark: rewrite commit message, fix typo in comment]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds definitions related to the Branch Record Buffer Extension
(BRBE) as per ARM DDI 0487K.a. These will be used by KVM and a BRBE driver
in subsequent patches.
Some existing BRBE definitions in asm/sysreg.h are replaced with equivalent
generated definitions.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-1-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
[1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions
Fixes: 757b435aaa ("efi: arm64: Add vmlinux debug link to the Image binary")
Fixes: a050910972 ("efi/libstub: implement generic EFI zboot")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from entry handling in arch/arm64/kernel/entry-common.c and
arch/arm64/kernel/entry.S.
This change unconditionally includes the bad stack handling and overflow
detection logic, simplifying the code and reflecting the mandatory use of
VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-8-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all
CONFIG_VMAP_STACK conditionals from SDEI stack allocation and
initialization in arch/arm64/kernel/sdei.c.
This change unconditionally defines the SDEI stack pointers and replaces
runtime checks with BUILD_BUG_ON() assertions, ensuring that the code is
only built when VMAP_STACK is enabled. This simplifies the logic and
reflects the mandatory use of VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-7-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from overflow stack handling in stacktrace code.
This change unconditionally defines the per-CPU overflow_stack and
stackinfo_get_overflow() helper in arch/arm64/include/asm/stacktrace.h,
and always includes the overflow stack in the stack_info array in
arch/arm64/kernel/stacktrace.c. Also, drop redundant CONFIG_VMAP_STACK
checks from SDEI stack declarations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-6-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove the
CONFIG_VMAP_STACK checks from overflow stack definitions and related
code in arch/arm64/kernel/traps.c. The overflow_stack and
panic_bad_stack() logic are now unconditionally included, simplifying
the source and matching the mandatory stack model.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-5-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK always enabled on arm64, drop the CONFIG_VMAP_STACK
checks and legacy irq stack allocation from arch/arm64/kernel/irq.c. The
code now unconditionally uses the VMAP_STACK path for irq stack
initialization, simplifying the logic.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-4-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that VMAP_STACK is always enabled on arm64, remove the
CONFIG_VMAP_STACK conditional logic from the definitions of THREAD_SHIFT
and THREAD_ALIGN in arch/arm64/include/asm/memory.h. This simplifies the
code by unconditionally setting THREAD_ALIGN to (2 * THREAD_SIZE) and
adjusting the THREAD_SHIFT definition to only depend on MIN_THREAD_SHIFT
and PAGE_SHIFT.
This change reflects the updated arm64 stack model, where all kernel
threads use virtually mapped stacks with guard pages, and ensures
alignment and stack sizing are consistently handled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-3-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Remove the CONFIG_VMAP_STACK check in arm64_efi_rt_init() since
VMAP_STACK is now always enabled on arm64.
The arch_alloc_vmap_stack() call will fail to build if VMAP_STACK
is not set, providing sufficient protection without the explicit
runtime check.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-2-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
On arm64, VMAP_STACK has been enabled by default for a while now, and
the only reason to disable it was a historical lack of support for
KASAN_VMALLOC. Today there's no good reason to disable VMAP_STACK.
Mandate VMAP_STACK, which will allow code to be simplified in
subsequent patches.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-1-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that debug exceptions are handled individually and without the need
for dynamic registration, remove the unused registration infrastructure.
This removes the external caller for `debug_exception_enter()` and
`debug_exception_exit()`.
Make them static again and remove them from the header.
Remove `early_brk64()` as it has been made redundant by
(arm64: debug: split brk64 exception entry) and is not used anymore.
Note : in `early_brk64()` `bug_brk_handler()` is called unconditionally
as a fall-through, but now `call_break_hook()` only calls it if the
immediate matches.
This does not change the behaviour in early boot, as if
`bug_brk_handler()` was called on a non-BUG immediate it would return
DBG_HOOK_ERROR anyway, which `call_break_hook()` will do if no immediate
matches.
Remove `trap_init()`, as it would be empty and a weak definition already
exists in `init/main.c`.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-14-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The BKPT32 exception can only be triggered by a BKPT instruction. Thus,
we know that the PC is a legitimate address and isn't being used to train
a branch predictor with a bogus address : we don't need to call
`arm64_apply_bp_hardening()`.
The handler for this exception only pends a signal and doesn't depend
on any per-CPU state : we don't need to inhibit preemption, nor do we
need to keep the DAIF exceptions masked, so we can unmask them earlier.
Split the BKPT32 exception entry and adjust function signatures and its
behaviour to match its relaxed constraints compared to other
debug exceptions.
We can also remove `NOKRPOBE_SYMBOL`, as this cannot lead to a kprobe
recursion.
This replaces the last usage of `el0_dbg()`, so remove it.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-13-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The BRK64 instruction can only be triggered by a BRK instruction. Thus,
we know that the PC is a legitimate address and isn't being used to train
a branch predictor with a bogus address : we don't need to call
`arm64_apply_bp_hardening()`.
We do not need to handle the Cortex-A76 erratum #1463225 either, as it
only relevant for single stepping at EL1.
BRK64 does not write FAR_EL1 either, as only hardware watchpoints do so.
Split the BRK64 exception entry, adjust the function signature, and its
behaviour to match the lack of needed mitigations.
Further, as the EL0 and EL1 code paths are cleanly separated, we can split
`do_brk64()` into `do_el0_brk64()` and `do_el1_brk64()`, and call them
directly from the relevant entry paths.
Use `die()` directly for the EL1 error path, as in `do_el1_bti()` and
`do_el1_undef()`.
We can also remove `NOKRPOBE_SYMBOL` for the EL0 path, as it cannot
lead to a kprobe recursion.
When taking a BRK64 exception from EL0, the exception handling is safely
preemptible : the only possible handler is `uprobe_brk_handler()`.
It only operates on task-local data and properly checks its validity,
then raises a Thread Information Flag, processed before returning
to userspace in `do_notify_resume()`, which is already preemptible.
Thus we can safely unmask interrupts and enable preemption before
handling the break itself, fixing a PREEMPT_RT issue where the handler
could call a sleeping function with preemption disabled.
Given that the break hook registration is handled statically in
`call_break_hook` since
(arm64: debug: call software break handlers statically)
and that we now bypass the exception handler registration, this change
renders `early_brk64` redundant : its functionality is now handled through
the post-init path.
This also removes the last usage of `el1_dbg()`.
This also removes the last usage of `el0_dbg()` without `CONFIG_COMPAT`.
Mark it `__maybe_unused`, to prevent a warning when building this patch
without `CONFIG_COMPAT`, as the following patch removes `el0_dbg()`.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-12-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
Hardware watchpoints are the only debug exceptions that will write
FAR_EL1, so we need to preserve it and pass it down.
However, they cannot be used to maliciously train branch predictors, so
we can omit calling `arm64_bp_hardening()`, nor do they need to handle
the Cortex-A76 erratum #1463225, as it only applies to single stepping
exceptions.
As the hardware watchpoint handler only returns 0 and never triggers
the call to `arm64_notify_die()`, we can call it directly from
`entry-common.c`.
Split the hardware watchpoint exception entry and adjust the behaviour
to match the lack of needed mitigations.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-11-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The single stepping exception has the most constraints : it can be
exploited to train branch predictors and it needs special handling at EL1
for the Cortex-A76 erratum #1463225. We need to conserve all those
mitigations.
However, it does not write an address at FAR_EL1, as only hardware
watchpoints do so.
The single-step handler does its own signaling if it needs to and only
returns 0, so we can call it directly from `entry-common.c`.
Split the single stepping exception entry, adjust the function signature,
keep the security mitigation and erratum handling.
Further, as the EL0 and EL1 code paths are cleanly separated, we can split
`do_softstep()` into `do_el0_softstep()` and `do_el1_softstep()` and
call them directly from the relevant entry paths.
We can also remove `NOKPROBE_SYMBOL` for the EL0 path, as it cannot
lead to a kprobe recursion.
Move the call to `arm64_apply_bp_hardening()` to `entry-common.c` so that
we can do it as early as possible, and only for the exceptions coming
from EL0, where it is needed.
This is safe to do as it is `noinstr`, as are all the functions it
may call. `el0_ia()` and `el0_pc()` already call it this way.
When taking a soft-step exception from EL0, most of the single stepping
handling is safely preemptible : the only possible handler is
`uprobe_single_step_handler()`. It only operates on task-local data and
properly checks its validity, then raises a Thread Information Flag,
processed before returning to userspace in `do_notify_resume()`, which
is already preemptible.
However, the soft-step handler first calls `reinstall_suspended_bps()`
to check if there is any hardware breakpoint or watchpoint pending
or already stepped through.
This cannot be preempted as it manipulates the hardware breakpoint and
watchpoint registers.
Move the call to `try_step_suspended_breakpoints()` to `entry-common.c`
and adjust the relevant comments.
We can now safely unmask interrupts before handling the step itself,
fixing a PREEMPT_RT issue where the handler could call a sleeping function
with preemption disabled.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/Z6YW_Kx4S2tmj2BP@uudg.org/
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-10-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
`reinstall_suspended_bps()` plays a key part in the stepping process
when we have hardware breakpoints and watchpoints enabled.
It checks if we need to step one, will re-enable it if it has
been handled and will return whether or not we need to proceed with
a single-step.
However, the current naming and return values make it harder to understand
the logic and goal of the function.
Rename it `try_step_suspended_breakpoints()` and change the return value
to a boolean, aligning it with similar functions used in
`do_el0_undef()` like `try_emulate_mrs()`, and making its behaviour
more obvious.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-9-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
Hardware breakpoints exceptions are generated by the hardware after user
configuration. As such, they can be exploited when training branch
predictors outside of the userspace VA range: they still need to call
`arm64_apply_bp_hardening()` if needed to mitigate against this attack.
However, they do not need to handle the Cortex-A76 erratum #1463225 as
it only applies to single stepping exceptions.
It does not set an address in FAR_EL1 either, only the hardware
watchpoint does.
As the hardware breakpoint handler only returns 0 and never triggers
the call to `arm64_notify_die()`, we can call it directly from
`entry-common.c`.
Split the hardware breakpoint exception entry, adjust
the function signature, and handling of the Cortex-A76 erratum to fit
the behaviour of the exception.
Move the call to `arm64_apply_bp_hardening()` to `entry-common.c` so that
we can do it as early as possible, and only for the exceptions coming
from EL0, where it is needed.
This is safe to do as it is `noinstr`, as are all the functions it
may call. `el0_ia()` and `el0_pc()` already call it this way.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-8-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move the `debug_exception_enter()` and `debug_exception_exit()`
functions from mm/fault.c, as they are needed to split
the debug exceptions entry paths from the current unified one.
Make them externally visible in include/asm/exception.h until
the caller in mm/fault.c is cleaned up.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-7-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove all infrastructure for the dynamic registration previously used by
software breakpoints and stepping handlers.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-6-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software stepping checks for the correct handler by iterating over a list
of dynamically registered handlers and calling all of them until one
handles the exception.
This is the only generic way to handle software stepping handlers in arm64
as the exception does not provide an immediate that could be checked,
contrary to software breakpoints.
However, the registration mechanism is not exported and has only
two current users : the KGDB stepping handler, and the uprobe single step
handler.
Given that one comes from user mode and the other from kernel mode, call
the appropriate one by checking the source EL of the exception.
Add a stand-in that returns DBG_HOOK_ERROR when the configuration
options are not enabled.
Remove `arch_init_uprobes()` as it is not useful anymore and is
specific to arm64.
Unify the naming of the handler to XXX_single_step_handler(), making it
clear they are related.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-5-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software breakpoints pass an immediate value in ESR ("comment") that can
be used to call a specialized handler (KGDB, KASAN...).
We do so in two different ways :
- During early boot, `early_brk64` statically checks against known
immediates and calls the corresponding handler,
- During init, handlers are dynamically registered into a list. When
called, the generic software breakpoint handler will iterate over
the list to find the appropriate handler.
The dynamic registration does not provide any benefit here as it is not
exported and all its uses are within the arm64 tree. It also depends on an
RCU list, whose safe access currently relies on the non-preemptible state
of `do_debug_exception`.
Replace the list iteration logic in `call_break_hooks` to call
the breakpoint handlers statically if they are enabled, like in
`early_brk64`.
Expose the handlers in their respective headers to be reachable from
`arch/arm64/kernel/debug-monitors.c` at link time.
Unify the naming of the software breakpoint handlers to XXX_brk_handler(),
making it clear they are related and to differentiate from the
hardware breakpoints.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-4-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
`aarch32_break_handler()` is called in `do_el0_undef()` when we
are trying to handle an exception whose Exception Syndrome is unknown.
It checks if the instruction hit might be a 32-bit arm break (be it
A32 or T2), and sends a SIGTRAP to userspace if it is so that it can
be handled.
However, this is badly represented in the naming of the function, and
is not consistent with the other functions called with the same logic
in `do_el0_undef()`.
Rename it `try_handle_aarch32_break()` and change the return value to
a boolean to align with the logic of the other tentative handlers in
`do_el0_undef()`, the previous error code being ignored anyway.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-3-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove the unnecessary boolean which always checks if the handler was found
and return early instead.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-2-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
RZ/G3E SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.
The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce a new KVM capability to expose to the userspace whether
cacheable mapping of PFNMAP is supported.
The ability to safely do the cacheable mapping of PFNMAP is contingent
on S2FWB and ARM64_HAS_CACHE_DIC. S2FWB allows KVM to avoid flushing
the D cache, ARM64_HAS_CACHE_DIC allows KVM to avoid flushing the icache
and turns icache_inval_pou() into a NOP. The cap would be false if
those requirements are missing and is checked by making use of
kvm_arch_supports_cacheable_pfnmap.
This capability would allow userspace to discover the support.
It could for instance be used by userspace to prevent live-migration
across FWB and non-FWB hosts.
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Oliver Upton <oliver.upton@linux.dev>
CC: David Hildenbrand <david@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-7-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM currently forces non-cacheable memory attributes (either Normal-NC
or Device-nGnRE) for a region based on pfn_is_map_memory(), i.e. whether
or not the kernel has a cacheable alias for it. This is necessary in
situations where KVM needs to perform CMOs on the region but is
unnecessarily restrictive when hardware obviates the need for CMOs.
KVM doesn't need to perform any CMOs on hardware with FEAT_S2FWB and
CTR_EL0.DIC. As luck would have it, there are implementations in the
wild that need to map regions of a device with cacheable attributes to
function properly. An example of this is Nvidia's Grace Hopper/Blackwell
systems where GPU memory is interchangeable with DDR and retains
properties such as cacheability, unaligned accesses, atomics and
handling of executable faults. Of course, for this to work in a VM the
GPU memory needs to have a cacheable mapping at stage-2.
Allow cacheable stage-2 mappings to be created on supporting hardware
when the VMA has cacheable memory attributes. Check these preconditions
during memslot creation (in addition to fault handling) to potentially
'fail-fast' as a courtesy to userspace.
CC: Oliver Upton <oliver.upton@linux.dev>
CC: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-6-ankita@nvidia.com
[ Oliver: refine changelog, squash kvm_supports_cacheable_pfnmap() patch ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fixes a security bug due to mismatched attributes between S1 and
S2 mapping.
Currently, it is possible for a region to be cacheable in the userspace
VMA, but mapped non cached in S2. This creates a potential issue where
the VMM may sanitize cacheable memory across VMs using cacheable stores,
ensuring it is zeroed. However, if KVM subsequently assigns this memory
to a VM as uncached, the VM could end up accessing stale, non-zeroed data
from a previous VM, leading to unintended data exposure. This is a security
risk.
Block such mismatch attributes case by returning EINVAL when userspace
try to map PFNMAP cacheable. Only allow NORMAL_NC and DEVICE_*.
CC: Oliver Upton <oliver.upton@linux.dev>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-4-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Despite its name, kvm_is_device_pfn() is actually used to determine if a
given PFN has a kernel mapping that can be used to perform cache
maintenance, as it calls pfn_is_map_memory() internally.
Expand the helper into its single callsite and further condition the
check on the VMA having either VM_PFNMAP or VM_MIXEDMAP set. VMAs that
set neither of these flags must always contain Normal, struct page
backed memory with valid aliases in the kernel address space.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-3-ankita@nvidia.com
[ Oliver: fixed typos, refined changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
To perform cache maintenance on a region of memory, KVM/arm64 relies on
that region having a cacheable alias in the kernel's address space which
can be used with CMO instructions.
The 'device' variable is somewhat of a misnomer, as it actually
indicates whether or not the stage-2 alias is allowed to have cacheable
memory attributes. The resulting stage-2 memory attributes are further
modified by VM_ALLOW_ANY_UNCACHED, selecting between Normal-NC or
Device-nGnRE depending on what the endpoint supports.
Rename the to s2_force_noncacheable such that its purpose is a bit more
obvious.
CC: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-2-ankita@nvidia.com
[ Oliver: addressed typos, wound up rewriting changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add in mt8395-genio-1200-evk devicetree file a sub node in pmic for
the mt6359-keys compatible to add the Power and Home MT6359 PMIC keys
support.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-3-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 has a green and a blue led which can be switched by gpio.
Green led is for running state so default on.
Green led also shares pin with eeprom writeprotect where led off allows
writing to eeprom.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-14-linux@fw-web.de
[Angelo: Fixed missing dt-bindings/leds/common.h header inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Pins were moved from SoC dtsi to Board level dtsi without cleaning up
to needed ones. Drop the unused pins now.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
CCI requires proc-supply. Add it on board level.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cci devicetree node for cpu frequency scaling.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Introduce ethernet controller nodes to EN7581 SoC and EN7581 evaluation
board.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250520-en7581-net-v1-1-5317f8e829ad@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Different Spherion variants use different trackpads on the same I2C2
bus. Instead of enabling all of them by default, mark them as
"fail-needs-probe" and let the implementation determine which one is
actually present.
Additionally, move the trackpad pinctrl entry back to the individual
trackpad nodes.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250318102259.189289-3-laura.nao@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a device tree for the MT8186 based Squirtle Chromebooks, also known
as the Acer Chromebook Spin 311 (R724T). The device is a 2-in-1
convertible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate device trees.
Merge the two device trees together and simplify the compatible string
list. The dtsi is still kept separate since there is an incoming device
that shares the same design, but with slightly difference components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Steelix design has two possible trackpad component sources. Currently
they are all marked as available, along with having workarounds for
shared pinctrl muxing and GPIOs.
Instead, mark them all as "fail-needs-probe" and have the implementation
try to probe which one is present.
Also remove the shared resource workaround by moving the pinctrl entry
for the trackpad interrupt line back into the individual trackpad nodes.
Cc: stable+noautosel@kernel.org # Needs accompanying new driver to work
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438e ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.
The board has the following features:
- Allwinner T527 SoC
- AXP717B + AXP323 PMICs
- Up to 4GB LPDDR4 DRAM
- micro SD slot
- optional eMMC module
- M.2 slot for PCIe 2.0 x1
- 16 MB SPI-NOR flash
- 4x USB 2.0 type-A ports (one can be used in gadget mode)
- 1x Gigabit ethernet w/ Motorcomm PHY (through yet to be supported GMAC200)
- 3.5mm audio jack via internal audio codec
- HDMI 2.0 output
- eDP, MIPI CSI (2-lane and 4-lane) and MIPI DSI (4-lane) connectors
- USB type-C port purely for power
- AP6256 (Broadcom BCM4345) WiFi 5.0 + BT 5.0
- unsoldered headers for ADC and an additional USB 2.0 host port
- 40-pin GPIO header
Add a device tree for it, enabling all peripherals currently supported.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
UART1 is normally used to connect to the Bluetooth side of a Broadcom
WiFi+BT combo chip. The connection uses 4 pins.
Add pinmux nodes for UART1, one for the RX/TX pins, and one for the
RTS/CTS pins.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Nodes are supposed to be sorted by address, or if no addresses
apply, by node name. The rgmii0 pins are out of order, possibly
due to multiple patches adding pin mux settings conflicting.
Move the rgmii0 pins to the correct location.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When the mmc nodes were added to the dtsi file, they were inserted in
the incorrect position.
Move them to the correct place.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-3-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-2-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In gadget mode, USB connections are sluggish. The device won't send
packets to the host unless the host sends packets to the device. For
instance, SSH-ing through the USB network would apparently not work
unless you're flood-pinging the device's IP.
Add the property snps,usb2-gadget-lpm-disable to the dwc3 node, which
seems to solve this issue.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-1-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register X0 contains PIE_E1_ASM and should not be written into REG_TCR2_EL1
which could have an adverse impact otherwise. This has remained undetected
till now probably because current value for PIE_E1_ASM (0xcc880e0ac0800000)
clears TCR2_EL1 which again gets set subsequently with 'tcr2' after testing
for FEAT_TCR2.
Drop this unwarranted 'msr' which is a stray change from an earlier commit.
This line got re-introduced when rebasing on top of the commit 926b66e2eb
("arm64: setup: name 'tcr2' register").
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 7052e808c4 ("arm64/sysreg: Get rid of the TCR2_EL1x SysregFields")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250704063812.298914-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We do not currently issue an ISB after updating POR_EL0 when
context-switching it, for instance. The rationale is that if the old
value of POR_EL0 is more restrictive and causes a fault during
uaccess, the access will be retried [1]. In other words, we are
trading an ISB on every context-switching for the (unlikely)
possibility of a spurious fault. We may also miss faults if the new
value of POR_EL0 is more restrictive, but that's considered
acceptable.
However, as things stand, a spurious Overlay fault results in
uaccess failing right away since it causes fault_from_pkey() to
return true. If an Overlay fault is reported, we therefore need to
double check POR_EL0 against vma_pkey(vma) - this is what
arch_vma_access_permitted() already does.
As it turns out, we already perform that explicit check if no
Overlay fault is reported, and we need to keep that check (see
comment added in fault_from_pkey()). Net result: the Overlay ISS2
bit isn't of much help to decide whether a pkey fault occurred.
Remove the check for the Overlay bit from fault_from_pkey() and
add a comment to try and explain the situation. While at it, also
add a comment to permission_overlay_switch() in case anyone gets
surprised by the lack of ISB.
[1] https://lore.kernel.org/linux-arm-kernel/ZtYNGBrcE-j35fpw@arm.com/
Fixes: 160a8e13de ("arm64: context switch POR_EL0 register")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250619160042.2499290-2-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We have a number of hwcaps for various SME subfeatures enumerated via
ID_AA64SMFR0_EL1. Currently we advertise these without cross checking
against the main SME feature, advertised in ID_AA64PFR1_EL1.SME which
means that if the two are out of sync userspace can see a confusing
situation where SME subfeatures are advertised without the base SME
hwcap. This can be readily triggered by using the arm64.nosme override
which only masks out ID_AA64PFR1_EL1.SME, and there have also been
reports of VMMs which do the same thing.
Fix this as we did previously for SVE in 064737920b ("arm64: Filter
out SVE hwcaps when FEAT_SVE isn't implemented") by filtering out the
SME subfeature hwcaps when FEAT_SME is not present.
Fixes: 5e64b862c4 ("arm64/sme: Basic enumeration support")
Reported-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250620-arm64-sme-filter-hwcaps-v1-1-02b9d3c2d8ef@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For really large values of CONFIG_NR_CPUS, a CPU mask value should
not be put on the stack:
arch/arm64/kernel/smp.c:1188:1: error: the frame size of 8544 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This could be achieved using alloc_cpumask_var(), which makes it
depend on CONFIG_CPUMASK_OFFSTACK, but as this function is already
serialized and can only run on one CPU, making the variable 'static'
is easier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250620111045.3364827-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
During EL2 setup if GCS is advertised in the ID registers we will reset the
GCS control registers GCSCR_EL1 and GCSCRE0_EL1 to known values in order to
ensure it is disabled. This is done without taking into account overrides
supplied on the command line, meaning that if the user has configured
arm64.nogcs we will still access these GCS specific registers. If this was
done because EL3 does not enable GCS this results in traps to EL3 and a
failed boot which is not what users would expect from having set that
parameter.
Move the writes to these registers to finalise_el2_state where we can pay
attention to the command line overrides. For simplicity we leave the
updates to the traps in HCRX_EL2 and the FGT registers in place since these
should only be relevant for KVM guests and KVM will manage them itself for
guests. This follows the existing practice for other similar traps for
overridable features such as those for TPIDR2_EL0 and SMPRI_EL1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250619-arm64-fix-nogcs-v1-1-febf2973672e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC,
with a board design that is very close to the Q20x development boards.
The MMC max-frequency properties are copied from the downstream device
tree.
https://ugoos.com/ugoos-am3-16g
The following functionality has been tested and is known to work:
- debug serial port
- "update" button inside the case
- USB host mode, on all three ports
- HDMI video/audio output
- eMMC, MicroSD, and SDIO WLAN
- S/PDIF audio output
- Ethernet
- Infrared remote control input
The following functionality doesn't seem to work:
- USB role switching and device mode on the "OTG" port
- case LED
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-2-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
meson-gxm-rbox-pro.dtb: brcmf@1: $nodename:0: 'brcmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250424084721.105113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Aneesh reports that his kernel fails to boot in nVHE mode with
KVM's protected mode enabled. Further investigation by Mostafa
reveals that this fails because CONFIG_JUMP_LABEL=n and that
we have static keys shared between EL1 and EL2.
While this can be worked around, it is obvious that we have long
relied on having CONFIG_JUMP_LABEL enabled at all times, as all
supported compilers now have 'asm goto' (which is the basic block
for jump labels).
Let's simplify our lives once and for all by mandating jump labels.
It's not like anyone else is testing anything without them, and
we already rely on them for other things (kfence, xfs, preempt).
Link: https://lore.kernel.org/r/yq5ah60pkq03.fsf@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250613141936.2219895-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
KASAN reports invalid accesses during arch_stack_walk() for EFI runtime
services due to vmalloc tagging[1]. The EFI runtime stack must be allocated
with KASAN tags reset to avoid false positives.
This patch uses arch_alloc_vmap_stack() instead of __vmalloc_node() for
EFI stack allocation, which internally calls kasan_reset_tag()
The changes ensure EFI runtime stacks are properly sanitized for KASAN
while maintaining functional consistency.
Link: https://lore.kernel.org/all/aFVVEgD0236LdrL6@gmail.com/ [1]
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250704-arm_kasan-v2-1-32ebb4fd7607@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
arm64 depends on the cpufreq driver to gain the maximum cpu frequency
to convert the watchdog_thresh to perf event period. cpufreq drivers
like cppc_cpufreq will be initialized lately after the initializing of
the hard lockup detector so just use a safe cpufreq which will be
inaccurency. Use a cpufreq notifier to adjust the event's period to
a more accurate one.
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Enable the STM32 timer drivers: MFD, counter, PWM and trigger as module.
These drivers can be used on STM32MP25.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-6-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Configure timer nodes on stm32mp257f-ev1:
- Timer3 CH2 is available on mikroBUS connector for PWM
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector.
Timers are kept disabled by default, so the pins can be used for any
other purpose (and the timers can be assigned to any of the processors).
Arbitrary choice is to use all these timers as PWM (or counter on
internal clock signal), except for timer10 that is configured with
CH1 as an input (for capture).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-9-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add timer pins available on stm32mp257f-ev1, configured for PWM:
- timer3 CH2 is available on mikroBUS connector
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector
Arbitrary define all these pins to be used as PWM (output) channels,
except for timer10 CH1, to be used as counter input.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-8-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add timers support on STM32MP25 SoC. Use dedicated compatible to handle
new features and instances introduced with this SoC. STM32MP25 SoC has
various timer flavours, each group has its own specific feature list:
- Advanced-control timers (TIM1/TIM8/TIM20)
- General-purpose timers (TIM2/TIM3/TIM4/TIM5)
- Basic timers (TIM6/TIM7)
- General-purpose timers (TIM10/TIM11/TIM12/TIM13/TIM14)
- General purpose timers (TIM15/TIM16/TIM17)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-7-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
the following:
- Andrea updates the defconfig to enable the RP1 misc, clock and gpio
drivers as as well as turn on CONFIG_OF_OVERLAY which is necessary to
apply the RP1 overlay file
-----BEGIN PGP SIGNATURE-----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=1iLu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=eRjS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.17/defconfig-arm64' of https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains ARM64 defconfig updates for 6.17, please pull
the following:
- Andrea updates the defconfig to enable the RP1 misc, clock and gpio
drivers as as well as turn on CONFIG_OF_OVERLAY which is necessary to
apply the RP1 overlay file
* tag 'arm-soc/for-6.17/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable OF_OVERLAY option
arm64: defconfig: Enable RP1 misc/clock/gpio drivers
Link: https://lore.kernel.org/r/20250630190216.1518354-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable modular support for Renesas RZ/V2H USB2PHY Port Reset Control
in the ARM64 defconfig,
- Refresh shmobile_defconfig for v6.16-rc2.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaF6CTAAKCRCKwlD9ZEnx
cHxAAP9usbO4+B4nfTB404OuuNdpHQNmXlrEC0w2wCEJxTvIrAEArYzTlPBHBQRx
Ike8sbnPWrgBOjLrlRSnuvmMEYRsaQ0=
=Rt4V
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W89q
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.17
- Enable modular support for Renesas RZ/V2H USB2PHY Port Reset Control
in the ARM64 defconfig,
- Refresh shmobile_defconfig for v6.16-rc2.
* tag 'renesas-arm-defconfig-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v6.16-rc2
arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver
Link: https://lore.kernel.org/r/cover.1751026659.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add internal pull-up to the SD_1 card detect signal, without this the CD
signal is floating and spurious detects events can happen.
Fixes: 87f95ea316 ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250701081643.71406-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This commit optimizes the contpte_ptep_get and contpte_ptep_get_lockless
function by adding early termination logic. It checks if the dirty and
young bits of orig_pte are already set and skips redundant bit-setting
operations during the loop. This reduces unnecessary iterations and
improves performance.
In order to verify the optimization performance, a test function has been
designed. The function's execution time and instruction statistics have
been traced using perf, and the following are the operation results on a
certain Qualcomm mobile phone chip:
Test Code:
#include <stdlib.h>
#include <sys/mman.h>
#include <stdio.h>
#define PAGE_SIZE 4096
#define CONT_PTES 16
#define TEST_SIZE (4096* CONT_PTES * PAGE_SIZE)
#define YOUNG_BIT 8
void rwdata(char *buf)
{
for (size_t i = 0; i < TEST_SIZE; i += PAGE_SIZE) {
buf[i] = 'a';
volatile char c = buf[i];
}
}
void clear_young_dirty(char *buf)
{
if (madvise(buf, TEST_SIZE, MADV_FREE) == -1) {
perror("madvise free failed");
free(buf);
exit(EXIT_FAILURE);
}
if (madvise(buf, TEST_SIZE, MADV_COLD) == -1) {
perror("madvise free failed");
free(buf);
exit(EXIT_FAILURE);
}
}
void set_one_young(char *buf)
{
for (size_t i = 0; i < TEST_SIZE; i += CONT_PTES * PAGE_SIZE) {
volatile char c = buf[i + YOUNG_BIT * PAGE_SIZE];
}
}
void test_contpte_perf() {
char *buf;
int ret = posix_memalign((void **)&buf, CONT_PTES * PAGE_SIZE,
TEST_SIZE);
if ((ret != 0) || ((unsigned long)buf % CONT_PTES * PAGE_SIZE)) {
perror("posix_memalign failed");
exit(EXIT_FAILURE);
}
rwdata(buf);
#if TEST_CASE2 || TEST_CASE3
clear_young_dirty(buf);
#endif
#if TEST_CASE2
set_one_young(buf);
#endif
for (int j = 0; j < 500; j++) {
mlock(buf, TEST_SIZE);
munlock(buf, TEST_SIZE);
}
free(buf);
}
int main(void)
{
test_contpte_perf();
return 0;
}
Descriptions of three test scenarios
Scenario 1
The data of all 16 PTEs are both dirty and young.
#define TEST_CASE2 0
#define TEST_CASE3 0
Scenario 2
Among the 16 PTEs, only the 8th one is young, and there are no dirty ones.
#define TEST_CASE2 1
#define TEST_CASE3 0
Scenario 3
Among the 16 PTEs, there are neither young nor dirty ones.
#define TEST_CASE2 0
#define TEST_CASE3 1
Test results
|Scenario 1 | Original| Optimized|
|-------------------|---------------|----------------|
|instructions | 37912436160| 18731580031|
|test time | 4.2797| 2.2949|
|overhead of | | |
|contpte_ptep_get() | 21.31%| 4.80%|
|Scenario 2 | Original| Optimized|
|-------------------|---------------|----------------|
|instructions | 36701270862| 36115790086|
|test time | 3.2335| 3.0874|
|Overhead of | | |
|contpte_ptep_get() | 32.26%| 33.57%|
|Scenario 3 | Original| Optimized|
|-------------------|---------------|----------------|
|instructions | 36706279735| 36750881878|
|test time | 3.2008| 3.1249|
|Overhead of | | |
|contpte_ptep_get() | 31.94%| 34.59%|
For Scenario 1, optimized code can achieve an instruction benefit of 50.59%
and a time benefit of 46.38%.
For Scenario 2, optimized code can achieve an instruction count benefit of
1.6% and a time benefit of 4.5%.
For Scenario 3, since all the PTEs have neither the young nor the dirty
flag, the branches taken by optimized code should be the same as those of
the original code. In fact, the test results of optimized code seem to be
closer to those of the original code.
Ryan re-ran these tests on Apple M2 with 4K base pages + 64K mTHP.
Scenario 1: reduced to 56% of baseline execution time
Scenario 2: reduced to 89% of baseline execution time
Scenario 3: reduced to 91% of baseline execution time
It can be proven through test function that the optimization for
contpte_ptep_get is effective. Since the logic of contpte_ptep_get_lockless
is similar to that of contpte_ptep_get, the same optimization scheme is
also adopted for it.
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Xavier Xia <xavier.qyxia@gmail.com>
Link: https://lore.kernel.org/r/20250624152549.2647828-1-xavier.qyxia@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MDSCR_EL1 has already been defined in tools sysreg format and hence can be
used in all debug monitor related call paths. But using generated sysreg
definitions causes build warnings because there is a mismatch between mdscr
variable (u32) and GENMASK() based masks (long unsigned int). Convert all
variables handling MDSCR_EL1 register as u64 which also reflects its true
width as well.
--------------------------------------------------------------------------
arch/arm64/kernel/debug-monitors.c: In function ‘disable_debug_monitors’:
arch/arm64/kernel/debug-monitors.c:108:13: warning: conversion from ‘long
unsigned int’ to ‘u32’ {aka ‘unsigned int’} changes value from
‘18446744073709518847’ to ‘4294934527’ [-Woverflow]
108 | disable = ~MDSCR_EL1_MDE;
| ^
--------------------------------------------------------------------------
While here, replace an open encoding with MDSCR_EL1_TDCC in __cpu_setup().
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250613023646.1215700-2-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
-----BEGIN PGP SIGNATURE-----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=kzjH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XReT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
* tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"
arm64: dts: broadcom: Add overlay for RP1 device
arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
arm64: dts: rp1: Add support for RaspberryPi's RP1 device
dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
ARM64: dts: bcm63158: Add BCMBCA peripherals
ARM64: dts: bcm6858: Add BCMBCA peripherals
ARM64: dts: bcm6856: Add BCMBCA peripherals
ARM64: dts: bcm4908: Add BCMBCA peripherals
Link: https://lore.kernel.org/r/20250630190216.1518354-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
Thunder2 SoC is missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609215706.3009692-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
LG131x SoCs are missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-2-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The LG1312 and LG1313 DT are almost identical with the exception of the
ethernet node. Refactor the common parts into a separate .dtsi file and
include it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-1-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One devicetree fix for a dtbs_warning that's been present for a while:
- Rename the PCIe BCM4377 node to conform to the devicetree binding
schema
Two devicetree fixes for W=1 warnings that have been introduced recently:
- Drop {address,size}-cells from SPI NOR which doesn't have any child
nodes such that these don't make sense
- Move touchbar mipi {address,size}-cells from the dtsi file where the
node is disabled and has no children to the dts file where it's
enabled and its children are declared
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaFbl7AAKCRBEEX0kKnUe
6XsbAQDadDedhUPUJmAzlXvNI+TYA87lijy93dnJAyYCKgWaMwEA4rZRtrCGYhR3
oQOmoE+YVIrgOdpN4gzNlUjIF7mEqAw=
=8+H3
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into arm/fixes
Apple SoC fixes for 6.16
One devicetree fix for a dtbs_warning that's been present for a while:
- Rename the PCIe BCM4377 node to conform to the devicetree binding
schema
Two devicetree fixes for W=1 warnings that have been introduced recently:
- Drop {address,size}-cells from SPI NOR which doesn't have any child
nodes such that these don't make sense
- Move touchbar mipi {address,size}-cells from the dtsi file where the
node is disabled and has no children to the dts file where it's
enabled and its children are declared
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Move touchbar mipi {address,size}-cells from dtsi to dts
arm64: dts: apple: Drop {address,size}-cells from SPI NOR
arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
-----BEGIN PGP SIGNATURE-----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=5+or
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung SoC fixes for v6.16
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
* tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
Historically KVM hyp code saved the host's FPSIMD state into the hosts's
fpsimd_state memory, and so it was necessary to map this into the hyp
Stage-1 mappings before running a vCPU.
This is no longer necessary as of commits:
* fbc7e61195 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
* 8eca7f6d51 ("KVM: arm64: Remove host FPSIMD saving for non-protected KVM")
Since those commits, we eagerly save the host's FPSIMD state before
calling into hyp to run a vCPU, and hyp code never reads nor writes the
host's fpsimd_state memory. There's no longer any need to map the host's
fpsimd_state memory into the hyp Stage-1, and kvm_arch_vcpu_run_map_fp()
is unnecessary but benign.
Remove kvm_arch_vcpu_run_map_fp(). Currently there is no code to perform
a corresponding unmap, and we never mapped the host's SVE or SME state
into the hyp Stage-1, so no other code needs to be removed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: kvmarm@lists.linux.dev
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250619134817.4075340-1-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Booting an EL2 guest on a system only supporting a subset of the
possible page sizes leads to interesting situations.
For example, on a system that only supports 4kB and 64kB, and is
booted with a 4kB kernel, we end-up advertising 16kB support at
stage-2, which is pretty weird.
That's because we consider that any S2 bigger than our base granule
is fair game, irrespective of what the HW actually supports. While this
is not impossible to support (KVM would happily handle it), it is likely
to be confusing for the guest.
Add new checks that will verify that this granule size is actually
supported before publishing it to the guest.
Fixes: e7ef6ed458 ("KVM: arm64: Enforce NV limits on a per-idregs basis")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce device tree overlays for supporting the eMMC (RTK0EF0186B02000BJ)
and microSD (RTK0EF0186B01000BJ) sub-boards connected via the CN15
connector on the RZ/V2H and RZ/V2N evaluation kits.
These overlays enable SDHI0 with appropriate pin control settings, power
regulators, and GPIO handling. Both sub-boards are supported using shared
overlay files that can be applied to either EVK due to their identical
connector layout and interface support.
To support this, new DT overlay files are added:
- `rzv2-evk-cn15-emmc.dtso` for eMMC
- `rzv2-evk-cn15-sd.dtso` for microSD
Additionally, the base DTS files for both EVKs are updated to include a
fixed 1.8V regulator (`reg_1p8v`) needed by the eMMC sub-board and
potential future use cases such as HDMI output.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250627193742.110818-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag
check fault on store operation only.
add MTE_STORE_ONLY hwcaps so that user can use this feature.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250618092957.2069907-5-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Introduce new flag -- MTE_CTRL_STORE_ONLY used to set store-only tag check.
This flag isn't overridden by prefered tcf flag setting but set together
with prefered setting of way to report tag check fault.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-4-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag
check fault on store operation only.
add MTE_STORE_ONLY feature.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-2-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If FEAT_MTE_TAGGED_FAR (Armv8.9) is supported, bits 63:60 of the fault address
are preserved in response to synchronous tag check faults (SEGV_MTESERR).
This patch modifies below to support this feature:
- Use the original FAR_EL1 value when an MTE tag check fault occurs,
if ARM64_MTE_FAR is supported so that not only logical tag
(bits 59:56) but also address tag (bits 63:60] being reported too.
- Add HWCAP for mtefar to let user know bits 63:60 includes
address tag information when when FEAT_MTE_TAGGED_FAR is supported.
Applications that require this information should install
a signal handler with the SA_EXPOSE_TAGBITS flag.
While this introduces a minor ABI change,
most applications do not set this flag and therefore will not be affected.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250618084513.1761345-3-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add FEAT_MTE_TAGGED_FAR cpucap which makes FAR_ELx report
all non-address bits on a synchronous MTE tag check fault since Armv8.9
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20250618084513.1761345-2-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Allocate a task flag used to represent the patch pending state for the
task. When a livepatch is being loaded or unloaded, the livepatch code
uses this flag to select the proper version of a being patched kernel
functions to use for current task.
In arch/arm64/Kconfig, select HAVE_LIVEPATCH and include proper Kconfig.
This is largely based on [1] by Suraj Jitindar Singh.
[1] https://lore.kernel.org/all/20210604235930.603-1-surajjs@amazon.com/
Cc: Suraj Jitindar Singh <surajjs@amazon.com>
Cc: Torsten Duwe <duwe@suse.de>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Breno Leitao <leitao@debian.org>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250630174502.842486-1-song@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Remove the duplicated pinctrl_lpi2c3 node.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reduce the driving strength of all Ethernet RGMII R/TXC pads according to
hardware signal measurement result.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The realtek phy CLKOUT signal is not used. Disable it to save power.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add usdhc3 and lpuart5 for imx93-9x9-qsb, imx93-11x11-evk and
imx93-14x14-evk, which connect to onboard wifi/bt module.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "eee-broken-1000t" was added on 8mm for FEC to avoid issue of ptp sync.
EQoS haven't such issue. So, remove this for EQoS phys.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX93 9x9 qsb has a ST LSM6DSO connected to I2C, which a is 6-axis
IMU (inertial measurement unit = accelerometer & gyroscope). So add the
missing parts to the DTS file.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the EQoS Ethernet controller on the i.MX8MP VAR-SOM with the
integrated Maxlinear MXL86110 PHY. The PHY is connected to the EQOS
MDIO bus at address 4.
This patch adds:
- EQOS controller configuration with RGMII interface.
- Proper reset timings.
- PHY power supply regulators.
- RGMII pinmux configuration for all data, control and clock signals.
- LED configuration for link status indication via the LED subsystem
under /sys/class/leds/, leveraging the support implemented in the.
mxl86110 PHY driver (drivers/net/phy/mxl-86110.c).
Two LEDs are defined to match the LED configuration on the Variscite
VAR-SOM Carrier Boards:
* LED@0: Yellow, netdev trigger.
* LED@1: Green, netdev trigger.
The RGMII TX/RX delays are implemented in SOM via PCB passive
delays, so no software delay configuration is required.
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add system controller watchdog support for i.MX8QM.
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct the DMA interrupter number of pcie0_ep from 317 to 311.
Fixes: 3b1d5deb29 ("arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The kernel currently alway prints:
"Use ACPI SPCR as default console: No/Yes "
even on systems that lack an SPCR table. This can
mislead users into thinking the SPCR table exists
on the machines without SPCR.
With this change, the "Yes" is only printed if
the SPCR table is present, parsed and !param_acpi_nospcr.
This avoids user confusion on SPCR-less systems.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250620131309.126555-3-me@linux.beauty
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The driver strength is too high for SDR104 mode. Change the driver strength
to x3 according to hardware recommendation.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB3 PHY tuning properties for imx95-15x15-evk and imx95-19x19-evk
boards according to signal measurement results.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 tpm3 netc_timer and related phys
regulators pinmux and related child nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Variscite has updated the Ethernet PHY on the VAR-SOM-MX93 from the
ADIN1300BCPZ to the MaxLinear MXL86110, as documented in the
August 2023 revision changelog.
Link: https://variwiki.com/index.php?title=VAR-SOM-MX93_rev_changelog
Update the device tree accordingly:
- Drop the regulator node used to power the previously PHY.
- Add support for the reset line using GPIO1_IO07 with proper timings.
- Configure the PHY LEDs via the LED subsystem under /sys/class/leds/,
leveraging the support implemented in the mxl86110 PHY driver
(drivers/net/phy/mxl-86110.c).
Two LEDs are defined to match the LED configuration on the Variscite
VAR-SOM Carrier Boards:
* LED@0: Yellow, netdev trigger.
* LED@1: Green, netdev trigger.
- Adjust the RGMII clock pad control settings to match the updated PHY
requirements.
These changes ensure proper PHY initialization and LED status indication
for the new MaxLinear MXL86110, improving board compatibility with the
latest hardware revision.
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW74xx D revision has added a M2SKT_WDIS2# GPIO which routes to the
W_DISABLE2# pin of the M.2 socket. Update the gpio name for consistency.
Fixes: 6a5d95b06d ("arm64: dts: imx8mp-venice-gw74xx: add M2SKT_GPIO10 gpio configuration")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although the bootloader should fixup with real memory size,
add memory node here with smallest assembled size for
readability.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move configuration for ADC voltage reference from board DTS to a SoM
include file. The SoC ADC reference voltage is connected to a "VDDA_1V8"
voltage node and supplied by the PMIC's BUCK5 regulator. The reference
voltage is thus defined by the SoM and cannot be changed by the carrier
board design and as such belongs into the SoM include file.
Moreover, with this in place, customers designing own carrier boards can
simply include imx93-phycore-som.dtsi and enable adc1 in their own DTS
without the need to define dummy ADC vref regulator themselves anymore.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
%.pi.o files are built as prerequisites of other objects.
There is no need to use extra-y, which is planned for deprecation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20250602180937.528459-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When converting a region via contpte_convert() to use mTHP, we have two
different goals. We have to mark each entry as contiguous, and we would
like to smear the dirty and young (access) bits across all entries in
the contiguous block. Currently, we do this by first accumulating the
dirty and young bits in the block, using an atomic
__ptep_get_and_clear() and the relevant pte_{dirty,young}() calls,
performing a tlbi, and finally smearing the correct bits across the
block using __set_ptes().
This approach works fine for BBM level 0, but with support for BBM level
2 we are allowed to reorder the tlbi to after setting the pagetable
entries. We expect the time cost of a tlbi to be much greater than the
cost of clearing and resetting the PTEs. As such, this reordering of the
tlbi outside the window where our PTEs are invalid greatly reduces the
duration the PTE are visibly invalid for other threads. This reduces the
likelyhood of a concurrent page walk finding an invalid PTE, reducing
the likelyhood of a fault in other threads, and improving performance
(more so when there are more threads).
Because we support via allowlist only bbml2 implementations that never
raise conflict aborts and instead invalidate the tlb entries
automatically in hardware, we can avoid the final flush altogether.
However, avoiding the intermediate tlbi+dsb must be carefully considered
to ensure that we remain both correct and performant. We document our
reasoning and the expected interactions further in the contpte_convert()
source. To do so we rely on the aarch64 spec (DDI 0487L.a D8.7.1.1)
requirements RNGLXZ and RJQQTC to provide guarantees that the elision is
correct.
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250625113435.26849-5-miko.lenczewski@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Break-Before-Make cpu feature supports multiple levels (levels 0-2),
and this commit adds a dedicated BBML2 cpufeature to test against
support for.
To support BBML2 in as wide a range of contexts as we can, we want not
only the architectural guarantees that BBML2 makes, but additionally
want BBML2 to not create TLB conflict aborts. Not causing aborts avoids
us having to prove that no recursive faults can be induced in any path
that uses BBML2, allowing its use for arbitrary kernel mappings.
This feature builds on the previous ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE,
as all early cpus must support BBML2 for us to enable it (and any later
cpus must also support it to be onlined).
Not onlining late cpus that do not support BBML2 is unavoidable, as we
might currently be using BBML2 semantics for kernel memory regions. This
could cause faults in the late cpus, and would be difficult to unwind,
so let us avoid the case altogether.
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250625113435.26849-3-miko.lenczewski@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For system-wide capabilities, the kernel has the SCOPE_SYSTEM type. Such
capabilities are checked once the SMP boot has completed using the
sanitised ID registers. However, there is a need for a new capability
type similar in scope to the system one but with checking performed
locally on each CPU during boot (e.g. based on MIDR_EL1 which is not a
sanitised register).
Introduce ARM64_CPUCAP_MATCH_ALL_EARLY_CPUS which, together with
ARM64_CPUCAP_SCOPE_LOCAL_CPU, ensures that such capability is enabled
only if all early CPUs have it. For ease of use, define
ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE which combines SCOPE_LOCAL_CPU,
PERMITTED_FOR_LATE_CPUS and MATCH_ALL_EARLY_CPUS.
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Reviewed-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Link: https://lore.kernel.org/r/20250625113435.26849-2-miko.lenczewski@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Move the arm64-optimized CRC code from arch/arm64/lib/crc* into its new
location in lib/crc/arm64/, and wire it up in the new way. This new way
of organizing the CRC code eliminates the need to artificially split the
code for each CRC variant into separate arch and generic modules,
enabling better inlining and dead code elimination. For more details,
see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/".
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the contents of arch/arm64/lib/crypto/ into lib/crypto/arm64/.
The new code organization makes a lot more sense for how this code
actually works and is developed. In particular, it makes it possible to
build each algorithm as a single module, with better inlining and dead
code elimination. For a more detailed explanation, see the patchset
which did this for the CRC library code:
https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/.
Also see the patchset which did this for SHA-512:
https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/
This is just a preparatory commit, which does the move to get the files
into their new location but keeps them building the same way as before.
Later commits will make the actual improvements to the way the
arch-optimized code is integrated for each algorithm.
Add a gitignore entry for the removed directory arch/arm64/lib/crypto/
so that people don't accidentally commit leftover generated files.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20250619191908.134235-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SHA-512 code via arm64-specific
crypto_shash algorithms, instead just implement the sha512_blocks()
library function. This is much simpler, it makes the SHA-512 (and
SHA-384) library functions be arm64-optimized, and it fixes the
longstanding issue where the arm64-optimized SHA-512 code was disabled
by default. SHA-512 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
To match sha512_blocks(), change the type of the nblocks parameter of
the assembly functions from int or 'unsigned int' to size_t. Update the
ARMv8 CE assembly function accordingly. The scalar assembly function
actually already treated it as size_t.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename existing functions and structs in architecture-optimized SHA-512
code that had names conflicting with the upcoming library interface
which will be added to <crypto/sha2.h>: sha384_init, sha512_init,
sha512_update, sha384, and sha512.
Note: all affected code will be superseded by later commits that migrate
the arch-optimized SHA-512 code into the library. This commit simply
keeps the kernel building for the initial introduction of the library.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
eMMC HS200 mode (1.8V I/O) is supported by the MMC host controller on
RK3528 and works with the optional on-board eMMC module on Radxa E20C.
Be explicit about HS200 support in the device tree for Radxa E20C.
Fixes: 3a01b5f14a ("arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250621165832.2226160-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ArmSoM Sige7 has onboard AP6275P Wi-Fi6 (PCIe) and BT5 (UART) module
which is similar with Khadas Edge2. This commit enables bluetooth
at uart6.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250621135319.61766-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RADXA ROCK 4D board has a PCIe controller connected to a flat flex
connector, compatible with the one the RPi5 uses.
Enable the associated combphy and pcie controller node, as well as add
the remaining pinctrl definition for the reset.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250621-rk3576-rock4d-pcie-v1-1-2b33c9f12955@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since commit c871a311ed ("phy: rockchip: samsung-hdptx: Setup TMDS
char rate via phy_configure_opts_hdmi"), the workaround of passing the
rate from DW HDMI QP bridge driver via phy_set_bus_width() became
partially broken, as it cannot reliably handle mode switches anymore.
Attempting to fix this up at PHY level would not only introduce
additional hacks, but it would also fail to adequately resolve the
display issues that are a consequence of the system CRU limitations.
Instead, proceed with the solution already implemented for RK3588: make
use of the HDMI PHY PLL as a better suited DCLK source for VOP2. This
will not only address the aforementioned problem, but it should also
facilitate the proper operation of display modes up to 4K@60Hz.
It's worth noting that anything above 4K@30Hz still requires high TMDS
clock ratio and scrambling support, which hasn't been mainlined yet.
Fixes: d74b842cab ("arm64: dts: rockchip: Add vop for rk3576")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-By: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-3-4b11007d8675@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As with the RK3588 SoC, the HDMI PHY PLL on RK3576 can be used as a more
accurate pixel clock source for VOP2, which is actually mandatory to
ensure proper support for display modes handling.
Add the missing #clock-cells property to allow using the clock provider
functionality of HDMI PHY.
Fixes: ad0ea230ab ("arm64: dts: rockchip: Add hdmi for rk3576")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-2-4b11007d8675@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the rockchip-dfi driver as a module, which is used on RK3588 as
well as RK3568 and RK3399 to measure memory bandwidth. For this, we also
enable PM_DEVFREQ_EVENT, which is a requirement for this driver.
Also enable the rockchip-rga driver as a module, which is used on
various Rockchip SoCs, including RK3588 and RK3399, to provide 2d
accelerated image transformations through a V4L2 interface.
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250626-rk3588-defconfig-v2-1-ae6720964b01@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Quartz 64 Model-A Schematic from 20210427 on page 7 shows that the
fan's power supply is provided by VCC12V_DCIN.
This fixes the following warning:
gpio-fan gpio_fan: supply fan not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250628142843.839150-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Hardware CS has a very slow rise time of about 6us,
causing transmission errors when CS does not reach
high between transaction.
It looks like it's not driven actively when transitioning
from low to high but switched to input, so only the CPU
pull-up pulls it high, slowly. Transitions from high to low
are fast. On the oscilloscope, CS looks like an irregular sawtooth
pattern like this:
_____
^ / |
^ /| / |
/| / | / |
/ | / | / |
___/ |___/ |_____/ |___
With cs-gpios we have a CS rise time of about 20ns, as it should be,
and CS looks rectangular.
This fixes the data errors when running a flashcp loop against a
m25p40 spi flash.
With the Rockchip 6.1 kernel we see the same slow rise time, but
for some reason CS is always high for long enough to reach a solid
high.
The RK3399 and RK3588 SoCs use the same SPI driver, so we also
checked our "Puma" (RK3399) and "Tiger" (RK3588) boards.
They do not have this problem. Hardware CS rise time is good.
Fixes: c484cf93f6 ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20250627131715.1074308-1-jakob.unterwurzacher@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
gs101 (Google Pixel 6 and Pixel 6 Pro) supports cold- and warm-reboot.
Cold-reset is useful because it is more secure, e.g. wiping all RAM
contents, while the warm-reboot allows RAM contents to be retained
across the reboot, e.g. to collect potential crash information.
Add the required DT changes to switch to the gs101-specific reboot
method, which knows how to issue either reset as requested by the OS.
The PMIC plays a role in this as well, so mark it as
'system-power-controller', which in this case ensures that the device
will wake up again after a cold-reboot, ensuring the full power-cycle
is successful.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-3-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a Samsung S2MPG10 is used as main PMIC, which
contains the following functional blocks:
* common / speedy interface
* regulators
* 3 clock outputs
* RTC
* power meters
* GPIO interfaces
This change enables the PMIC itself and the RTC. We're still working on
the remaining parts or waiting for bindings to be merged, hence only a
small subset of the functional is being enabled.
The regulators fall into the same category (still being finalised), but
since the binding requires a 'regulators' node, an empty node is being
added to avoid validation errors at this stage.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-2-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable the Samsung s2mpg1x driver as this is used by the gs101-oriole
and gs101-raven (Google Pixel 6 and Pixel 6 Pro) boards.
It communicates over ACPM instead of I2C, hence the additional
defconfig item.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-1-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ufs-exynos driver configures the sysreg shareability as
cacheable for gs101 so we need to set the dma-coherent
property so the descriptors are also allocated cacheable.
This fixes the UFS stability issues we have seen with
the upstream UFS driver on gs101.
Fixes: 4c65d7054b ("arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes")
Cc: stable@vger.kernel.org
Suggested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250314-ufs-dma-coherent-v1-1-bdf9f9be2919@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Watchdog doesn't work on NXP ls1046ardb board because in commit
7c8ffc5555cb("arm64: dts: layerscape: remove big-endian for mmc nodes"),
it intended to remove the big-endian from mmc node, but the big-endian of
watchdog node is also removed by accident. So, add watchdog big-endian
property back.
In addition, add compatible string fsl,ls1046a-wdt, which allow big-endian
property.
Fixes: 7c8ffc5555 ("arm64: dts: layerscape: remove big-endian for mmc nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The overshoot of MDIO, MDC, ENET1_TDx and ENET2_TDx is too high, so
reduce the drive strength of these pins.
Fixes: e3e8b199af ("arm64: dts: imx95: Add imx95-15x15-evk support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The overshoot of MDIO, MDC and ENET1_TDx is too high, so reduce the drive
strength these pins.
Fixes: 025cf78938 ("arm64: dts: imx95-19x19-evk: add ENETC 0 support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone and convert
the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add WM8962 codec connected to SAI1 interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add i2c io expander support for imx943 evk board.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add lpi2c and i2c-mux support for imx943 evk board.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add micfil and mqs device nodes
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On gs101, the boot mode is stored both in a syscon register, and in
nvmem.
Add the dm-verity-device-corrupted reboot mode to the syscon-reboot-
based boot mode as well, as both (nvmem & syscon) modes should be in
sync.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-4-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the 'nvmem-reboot-mode' which is used to communicate a requested
boot mode to the boot loader.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-3-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a MAX77759 companion PMIC for USB Type-C
applications is used, which contains four functional blocks (at
distinct I2C addresses):
* top (including GPIO & NVMEM)
* charger
* fuel gauge
* TCPCi
This change adds the PMIC and the subnodes for the GPIO expander and
NVMEM, and defines the NVMEM layout.
The NVMEM layout is declared such that it matches downstream's
open-coded configuration [1].
Note:
The pinctrl nodes are kept sorted by the 'samsung,pins' property rather
than node name, as I think that makes it easier to look at and to add
new nodes unambiguously in the future. Its label is prefixed with 'if'
(for interface), because there are three PMICs in total in use on
Pixel 6 (Pro).
Link: https://android.googlesource.com/kernel/google-modules/bms/+/96e729a83817/max77759_maxq.c#67 [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-2-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable the Maxim max77759 as this is used by the gs101-oriole and
gs101-raven (Google Pixel 6 and Pixel 6 Pro) boards,
The child devices' defaults are based on this MFD driver's state, so
this commit enables those implicitly as well.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-1-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Works:
* Both speakers
* Both MICs
* Headphones jack, L/R channels
* Headphones jack, MIC
Now working/untested:
* Sound over DisplayPort
* Sound over HDMI
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250623113709.21184-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It appears not the latest version of the patch was merged. Align with
latest upstreamed version by correcting GPU enable location and typo
in GPU firmware path for x1p42100 variant.
Fixes: 6516961352 ("arm64: dts: qcom: Add support for X1-based Asus Zenbook A14")
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623113709.21184-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e7 ("perf: Fix the throttle error of some clock events")
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rename "regulator0" to "regulator-0p8v" and "regulator1" to
"regulator-3p3v" for consistency as done in the RZ/V2N EVK.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250620121045.56114-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the Renesas RAA215300 PMIC to the RZ/V2N EVK. The PMIC is
connected to I2C8 and uses a 32.768kHz fixed clock source (x6).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250619135539.207828-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the Renesas RAA215300 PMIC to the RZ/V2H EVK. The PMIC is
connected to I2C8 and uses a 32.768kHz fixed clock source (x6).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250619135539.207828-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Marc reported that enabling protected mode on a device with GICv2
doesn't fail gracefully as one would expect, and leads to a host
kernel crash.
As it turns out, the first half of pKVM init happens before the vgic
probe, and so by the time we find out we have a GICv2 we're already
committed to keeping the pKVM vectors installed at EL2 -- pKVM rejects
stub HVCs for obvious security reasons. However, the error path on KVM
init leads to teardown_hyp_mode() which unconditionally frees hypervisor
allocations (including the EL2 stacks and per-cpu pages) under the
assumption that a previous cpu_hyp_uninit() execution has reset the
vectors back to the stubs, which is false with pKVM.
Interestingly, host stage-2 protection is not enabled yet at this point,
so this use-after-free may go unnoticed for a while. The issue becomes
more obvious after the finalize_pkvm() call.
Fix this by keeping track of the CPUs on which pKVM is initialized in
the kvm_hyp_initialized per-cpu variable, and use it from
teardown_hyp_mode() to skip freeing pages that are in fact used.
Fixes: a770ee80e6 ("KVM: arm64: pkvm: Disable GICv2 support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250626101014.1519345-1-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ACSPCIE1 module on TI's J784S4 SoC is capable of driving the reference
clock required by the PCIe Endpoint device. It is an alternative to on-
board and external reference clock generators.
Add the device-tree node for the same.
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Link: https://lore.kernel.org/r/20250513152155.1590689-1-parth105105@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
According to the "GPIO Expander Map / Table" section of the J722S EVM
Schematic within the Evaluation Module Design Files package [0], the
GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled
down to select the Type-C interface. Since commit under Fixes claims to
enable the Type-C interface, update the property within "p05-hog" from
"output-high" to "output-low", thereby switching from the Type-A
interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org
Fixes: 485705df5d ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
host_stage2_adjust_range() tries to find the largest block mapping that
fits within a memory or mmio region (represented by a kvm_mem_range in
this function) during host stage-2 faults under pKVM. To do so, it walks
the host stage-2 page-table, finds the faulting PTE and its level, and
then progressively increments the level until it finds a granule of the
appropriate size. However, the condition in the loop implementing the
above is broken as it checks kvm_level_supports_block_mapping() for the
next level instead of the current, so pKVM may attempt to map a region
larger than can be covered with a single block.
This is not a security problem and is quite rare in practice (the
kvm_mem_range check usually forces host_stage2_adjust_range() to choose a
smaller granule), but this is clearly not the expected behaviour.
Refactor the loop to fix the bug and improve readability.
Fixes: c4f0935e4d ("KVM: arm64: Optimize host memory aborts")
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250625105548.984572-1-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The state of the vcpu's MI line should be asserted when its
ICH_HCR_EL2.En is set and ICH_MISR_EL2 is non-zero. Using bitwise AND
(&=) directly for this calculation will not give us the correct result
when the LSB of the vcpu's ICH_MISR_EL2 isn't set. Correct this by
directly computing the line level with a logical AND operation.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250625084709.3968844-1-r09922117@csie.ntu.edu.tw
[maz: drop the level check from the original code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
We should not rely on the bootloader to set up the pinmux of the debug
UART port. Let's add pin definitions for uart4 to tlmm and bind them to
the relevant device node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250625152839.193672-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
$nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'amplifier@31' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (3 controllers) for simplicity and
obviousness, even if the SoC I2C controller is not enabled on given
board. The names anyway would not conflict with SoC ones because of
unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612095549.77954-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fold kvm_arch_irqfd_route_changed() into kvm_arch_update_irqfd_routing().
Calling arch code to know whether or not to call arch code is absurd.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't bother WARNing if updating an IRTE route fails now that vendor code
provides much more precise WARNs. The generic WARN doesn't provide enough
information to actually debug the problem, and has obviously done nothing
to surface the myriad bugs in KVM x86's implementation.
Drop all of the associated return code plumbing that existed just so that
common KVM could WARN.
Link: https://lore.kernel.org/r/20250611224604.313496-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace. This was
delayed because the spec lacked a way for userspace to deny supporting
these calls; the new exit code is now approved.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhXq3YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM6JAf/YG2NrLK22eZuNILBu6lwf4+yrUfU
vKcQLHjyX477xRIDZOiAqFOw6JVfqUj7gHbPM+wiVIAg3JT931TkeaZQFuOnMg+k
HalkddeSa9oupd9nhmogcRfGovOXmBQFOleJ+h3GcSeMT/w+6JtgXmgC6/l29f3X
xswi9Lb6yRbcnd2E8XOnJ+ZBqA3ABguuM+0vcmN2xH6EIBaRzjuDPPHV3NGf2aBK
BTAylYzU5P4tZYEHiH/9WlCM19gaeIb2A1LSPDNASpUufvw4VIpmU9MwLDa5LtNB
kVIQxotgFHEoO9qnTX8sGsBrNuStHOuzZA17Z8O6OzTYISK5a7CdworR1w==
=upFj
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace.
This was delayed because the spec lacked a way for userspace to
deny supporting these calls; the new exit code is now approved"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: TDX: Exit to userspace for GetTdVmCallInfo
KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs
KVM: arm64: VHE: Centralize ISBs when returning to host
KVM: arm64: Remove cpacr_clear_set()
KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()
KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()
KVM: arm64: Reorganise CPTR trap manipulation
KVM: arm64: VHE: Synchronize CPTR trap deactivation
KVM: arm64: VHE: Synchronize restore of host debug registers
KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_cases
KVM: arm64: Explicitly treat routing entry type changes as changes
KVM: arm64: nv: Fix tracking of shadow list registers
RISC-V: KVM: Don't treat SBI HFENCE calls as NOPs
RISC-V: KVM: Fix the size parameter check in SBI SFENCE calls
The Firefly ROC-RK3588S-PC is a SBC based on the Rockchip RK3588s SoC.
Link: https://wiki.t-firefly.com/en/Station-M3/index.html
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- Realtek USB WiFi 5/BT
- NVME 2242 socket
- 4 or 8GB of RAM
- RTL8211 GbE
- USB 3.0 port
- USB 2.0 port
- HDMI port
Signed-off-by: Hsun Lai <i@chainsx.cn>
Link: https://lore.kernel.org/r/20250609113044.8846-3-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
AM64X SoC has one instance of PCIe which is PCIe0. To support PCIe boot
on AM64X SoC, PCIe0 needs to be in endpoint mode and it needs to be
functional at all stages of PCIe boot process. Thus add the
"bootph-all" boot phase tag to "pcie0_ep" device tree node.
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250610054920.2395509-1-h-salunke@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Pinmux registers ends at 0x000f42ac (including). Thus, the size argument
of the pinctrl-single node has to be 0x2b0. Fix it.
This will fix the following error:
pinctrl-single f4000.pinctrl: mux offset out of range: 0x2ac (0x2ac)
Fixes: 29075cc09f ("arm64: dts: ti: Introduce AM62P5 family of SoCs")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250618065239.1904953-1-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Describe the octal SPI NAND available on the low-power starter kit.
The pinctrl configuration comes from TI fork.
With the current mainline tree, we currently get the following
performances:
eraseblock write speed is 7507 KiB/s
eraseblock read speed is 15802 KiB/s
page write speed is 7551 KiB/s
page read speed is 15609 KiB/s
2 page write speed is 7551 KiB/s
2 page read speed is 15609 KiB/s
erase speed is 284444 KiB/s
2x multi-block erase speed is 512000 KiB/s
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250613182356.1272642-1-miquel.raynal@bootlin.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add McASP 0-4 instances and keep them disabled because several
required properties are missing as they are board specific.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250604104656.38752-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.
Fixes: 87f95ea316 ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250529102601.452859-1-ghidoliemanuele@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable internal bias pull-ups on the SoC-side I2C buses that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.
Cc: stable@vger.kernel.org
Fixes: 316b80246b ("arm64: dts: ti: add verdin am62")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250528110741.262336-1-ghidoliemanuele@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
For the ICSSG PHYs to operate correctly, a 25 MHz reference clock must
be supplied on CLKOUT0. Previously, our bootloader configured this
clock, which is why the PRU Ethernet ports appeared to work, but the
change never made it into the device tree.
Add clock properties to make EXT_REFCLK1.CLKOUT0 output a 25MHz clock.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Fixes: 87adfd1ab0 ("arm64: dts: ti: am642-phyboard-electra: Add PRU-ICSSG nodes")
Link: https://lore.kernel.org/r/20250521053339.1751844-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
When updating IRTEs in response to a GSI routing or IRQ bypass change,
pass the new/current routing information along with the associated irqfd.
This will allow KVM x86 to harden, simplify, and deduplicate its code.
Since adding/removing a bypass producer is now conveniently protected with
irqfds.lock, i.e. can't run concurrently with kvm_irq_routing_update(),
use the routing information cached in the irqfd instead of looking up
the information in the current GSI routing tables.
Opportunistically convert an existing printk() to pr_info() and put its
string onto a single line (old code that strictly adhered to 80 chars).
Link: https://lore.kernel.org/r/20250611224604.313496-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When unmapping a vLPI, WARN if nullifying vCPU affinity fails, not just if
failure occurs when freeing an ITE. If undoing vCPU affinity fails, then
odds are very good that vLPI state tracking has has gotten out of whack,
i.e. that KVM and the GIC disagree on the state of an IRQ/vLPI. At best,
inconsistent state means there is a lurking bug/flaw somewhere. At worst,
the inconsistency could eventually be fatal to the host, e.g. if an ITS
command fails because KVM's view of things doesn't match reality/hardware.
Note, only the call from kvm_arch_irq_bypass_del_producer() by way of
kvm_vgic_v4_unset_forwarding() doesn't already WARN. Common KVM's
kvm_irq_routing_update() WARNs if kvm_arch_update_irqfd_routing() fails.
For that path, if its_unmap_vlpi() fails in kvm_vgic_v4_unset_forwarding(),
the only possible causes are that the GIC doesn't have a v4 ITS (from
its_irq_set_vcpu_affinity()):
/* Need a v4 ITS */
if (!is_v4(its_dev->its))
return -EINVAL;
guard(raw_spinlock)(&its_dev->event_map.vlpi_lock);
/* Unmap request? */
if (!info)
return its_vlpi_unmap(d);
or that KVM has gotten out of sync with the GIC/ITS (from its_vlpi_unmap()):
if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d))
return -EINVAL;
All of the above failure scenarios are warnable offences, as they should
never occur absent a kernel/KVM bug.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/all/aFWY2LTVIxz5rfhh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Suppress KASAN false positive in stack unwinding code.
- Drop redundant reset of the GCS state on exec().
- Don't try to descend into a !present PMD when creating a huge vmap()
entry at the PUD level.
- Fix a small typo in the arm64 booting Documentation.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmhUDbUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNHmfB/9jJazW5qioi/pAQ2tOFilRBB8miRHmXjUt
iaChiFa7cPSuqiv4IVRaY66CPkqgp22kTMb4y0Vc4E7WEdzUG21e5F52yhhZlwBB
CuH0NSOclJ6vnqACyDOLYn7WWgiP+jachcvJlvMp+XiB2dE0z1UyQkwk59j7I/oT
MHJLfNeIXpUb2k/LkJXAIWEGuNcg4pOREzKlbyl8iGwxvtC7+MjAfYuWSrKTIfLX
0ixyaqfUY2wFrRsFLowJH/unIDW3Iv1HItCWEtz+j2n3Hh1sJaIo3YcWfG3/AVaO
eg1atu7ZUYEr9sLaBqJH9JY8lN8UnsnkZ+iUQzciSUTwPJxSARXv
=L3s/
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's nothing major (even the vmalloc one is just suppressing a
potential warning) but all worth having, nonetheless.
- Suppress KASAN false positive in stack unwinding code
- Drop redundant reset of the GCS state on exec()
- Don't try to descend into a !present PMD when creating a huge
vmap() entry at the PUD level
- Fix a small typo in the arm64 booting Documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
Add a new gpu node in mt8370.dtsi to enable support for the
ARM Mali G57 MC2 GPU (Valhall-JM) found on the MT8370 SoC, using the
Panfrost driver.
On a Mediatek Genio 510 EVK board, the panfrost driver probed with the
following message:
```
panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, issues: 00000003,
80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x5 l2_present=0x1
[drm] Initialized panfrost 1.3.0 for 13000000.gpu on minor 0
```
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-5-2833888cb1d3@collabora.com
Add arch_stack_walk_reliable(), which will be used during kernel live
patching to detect when threads have completed executing old versions of
functions.
Note that arch_stack_walk_reliable() only needs to guarantee that it
returns an error code when it cannot provide a reliable stacktrace. It
is not required to provide a reliable stacktrace in all scenarios so
long as it returns said error code.
At present we can only reliably unwind up to an exception boundary. In
future we should be able to improve this with additional data from the
compiler (e.g. sframe).
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250320171559.3423224-2-song@kernel.org
[ Mark: Simplify logic, clarify commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If kretprobe_find_ret_addr() fails to find the original return address,
it returns 0. Check for this case so that a reliable stacktrace won't
silently ignore it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable late module patching, livepatch modules need to be able to
apply some of their relocations well after being loaded. In this
scenario however, the livepatch module text and data is already RX-only,
so special treatment is needed to make the late relocations possible. To
do this, use the text-poking API for these late relocations.
This patch is partially based off commit 88fc078a7a ("x86/module: Use
text_poke() for late relocations").
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250603223417.3700218-1-dylanbhatch@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Haikou Video Demo adapter has a proprietary connector for a camera
module which has an OV5675 camera sensor and a companion DW9714 focus
lens driver.
This adds support for the camera module on PX30 Ringneck module fitted
on a Haikou devkit with the Haikou Video Demo adapter.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-3-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This will make it slightly easier for Device Trees (and Overlays) to
link the ISP controller to a video input such as a CSI camera while also
bringing it closer to what's been done already for the DSI controller.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-2-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
dtc complains with the following message for DTSes which use the ISP:
arch/arm64/boot/dts/rockchip/px30.dtsi:1272.19-1276.6: Warning (graph_child_address): /isp@ff4a0000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Typically, it is expected from the device DTS(I) to update the SoC DTSI
nodes if they have more than one endpoint, so let's assume there's only
one endpoint in port@0 by default, instead of forcing board DTS(I)s to
/delete-property/ address-cells and size-cells to make dtc happy.
Because PX30 PP1516/EVB's endpoint@0 is the only endpoint and
considering its parent node now has no address-cells property, dtc
complains (same messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#size-cells' is -1, must be 0
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (graph_child_address): Failed prerequisite 'graph_endpoint'
so we fix that by removing the reg property. dtc still complains (same
messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-450.6: Warning (unit_address_vs_reg): /isp@ff4a0000/ports/port@0/endpoint@0: node has a unit name, but no reg or ranges property
so we also remove the @0 suffix off the node name.
Fixes: 8df7b4537d ("arm64: dts: rockchip: add isp node for px30")
Fixes: 474a77395b ("arm64: dts: rockchip: hook up camera on px30-evb")
Fixes: 56198acdbf ("arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-1-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RTC module on S32G2/S32G3 based SoCs is used as a wakeup source from
system suspend.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
S32G3 and S32G2 have the same 6 SPI devices, add the DT entries. Devices
are all the same except spi0 has 8 chip selects instead of 5. Clock
settings for the chip rely on ATF Firmware [1].
[1]: https://github.com/nxp-auto-linux/arm-trusted-firmware
Co-developed-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set ethernet1 alias to EQOS interface on phyBOARD-Segin-i.MX93 marking
it the secondary networking interface. The primary ethernet0 interface
is already set by the SoM include file (imx93-phycore-som.dtsi).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move alias for ethernet0 interface to the phyCORE-i.MX93 SoM include
file. The reason behind it is that the physical location of the PHY chip
connected to FEC interface is on the SoM itself and alias thus belongs
into the SoM device-tree. Consequently, it can be used by all boards
based on the phyCORE-i.MX93 SoM (phyBOARD-Segin and phyBOARD-Nash).
This also enables us to mark FEC interface as the primary / first for
networking in the bootloader and systemd (predictable interface names).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable EASRC support in tlv320aic32x4 sound card.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable EASRC support in tlv320aic32x4 sound card.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the BOE av123z7m-n17 variant of the Moduline Display, this variant
comes with a 12.3" 1920x720 display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the BOE av101hdt-a10 variant of the Moduline Display, this variant
comes with a 10.1 1280x720 display with a touchscreen (not working in
mainline).
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Moduline Display platform is a part of the wider GOcontroll Moduline
ecosystem. These are embedded controllers that focus on modularity with
their swappable IO modules.
The base Moduline Display board includes a board-to-board connector with
various busses to enable adding new display types required by the
application. It includes 2 Moduline IO module slots, a simple mono
codec/amplifier, a four channel adc, 2 CAN busses, an RTC and optional
wifi/bluetooth.
busses to the display adapter include:
- 4 lane LVDS
- 4 lane MIPI-DSI
- 4 lane MIPI-CSI
- HDMI 2.0a
- USB 2.0
- I2S
- I2C
- SPI
Also a couple of GPIO and PWM pins for controlling various ICs on the
display adapter board.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Ka-Ro Electronics tx8p-ml81 is a COM based on the imx8mp SOC. It has
2 GB of ram and 8 GB of eMMC storage on board.
Add it to enable boards based on this Module
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently to configure each IOMUXC_SW_PAD_CTL_PAD the raw value of this
register is written in the dts, these values are not obvious. Add defines
which describe the fields of this register which can be or-ed together to
produce readable settings.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add power-domain nodes for the power controller on RK3528.
Only PD_GPU can fully be powered down. PD_RKVDEC, PD_RKVENC, PD_VO and
PD_VPU are idle only power domains used by miscellaneous devices.
Because multiple of the miscellaneous device types currently complain
about the use of a power-domains prop, only PD_GPU is enabled.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250518220707.669515-5-jonas@kwiboo.se
[changed to using numeric values, until the next merge-window]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ArmSoM Sige5 has several USB ports: a Type-A USB 3 port (USB2 lines
going through a hub), a Type-A USB 2.0 port (also going through a hub),
a Type-C DC input port that has absolutely no USB data connection and a
Type-C port with USB3.2 Gen1x1 that's also the maskrom programming port.
Enable these ports, and set the device role to be host for the host
ports.
The data capable Type-C USB port uses a fusb302 for data role switching.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250619-rk3576-sige5-usb-v5-2-9069a7e750e1@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
List both CPU supply regulators which drive the little and big CPU
clusters, respectively, so that cpufreq can pick them up.
Without this patch the cpufreq governor attempts to raise the big CPU
frequency under high load, while its supply voltage stays at 850000 uV.
This causes system instability and, in my case, random reboots.
With this patch, supply voltages are adjusted in step with frequency
changes from 700000-737000 uV in idle to 950000 uV under full load,
and the system appears to be stable.
While at this, list all CPU supplies for completeness.
Cc: stable@vger.kernel.org
Fixes: 40f742b07a ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-1-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the Broadcom based WiFi/Bluetooth module (BW3752-50B1)
found in ArmSoM Sige5 boards version 1.2. This includes SDIO connected
WiFi with OOB interrupt support, as well as UART connected Bluetooth
with its respective interrupts.
PCM support for Bluetooth SCO audio is left out for now. It is connected
to SAI2 in M0 pin mode in case someone needs to enable it.
Note that v1.1 boards used a Realtek based module which is incompatible
with these DT nodes, so v1.1 would need a different overlay.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-4-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ArmSoM Sige5 uses a soldered-on WiFi/BT module with WiFi on SDIO and BT
on UART. However, board v1.1 uses a Realtek based BL-M8852BS2, while
v1.2 uses a Broadcom based BW3752-50B1. They use the same pins and
controllers, but require different DT properties to enable.
Thankfully, the WiFi part at least works without explicitly listing it in
the device tree, albeit without OOB interrupt functionality.
Add required device tree nodes that do not depend on the board version so
that at least the WiFi module can appear on the SDIO bus.
WiFi OOB interrupt and Bluetooth function support are not enabled here, as
they require module specific properties.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-3-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3576 has one more SD/MMC controller than are currently listed in its
.dtsi, with the missing one intended as an SDIO controller. Add the
missing node (tested with the onboard WiFi module on ArmSoM Sige5 v1.2)
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-2-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix a few issues in the panel section of the PinePhone Pro DTS:
- add the second part of the Himax HX8394 LCD panel controller
compatible
- as proposed by Diederik de Haas, reuse the mipi_out and ports
definitions from rk3399-base.dtsi instead of redefining them
- add a pinctrl for the LCD_RST signal for LCD1, derived from
LCD1_RST, which is on GPIO4_D1, as documented on pages 11
and 16 of the PinePhone Pro schematic
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250619-dtb_fixes-v3-1-9cb02ddd8ce4@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add bootph-all property to sysinfo EEPROM on Renesas R-Car Gen3
Salvator-X(S), ULCB, Condor, Ebisu, Draak boards. The sysinfo
EEPROM is used by U-Boot early on, mark it using the bootph-all
property. No functional change for the Linux kernel, this only
reduces the divergence of DTs between U-Boot and Linux.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250608215212.1619182-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot. For example usage, refer to the Sparrow
Hawk board.
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/20250607194541.79176-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/V2N (R9A09G056) SoC features a single-channel USB2.0
interface with host and peripheral (function) support.
Add the ECHI, OHCI, USB2.0 PHY and reset control nodes for USB2.0
channel in R9A09G056 SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250528140453.181851-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the `CONFIG_RESET_RZV2H_USB2PHY` option in the arm64 defconfig to
support the USB2 PHY controller reset driver on the Renesas RZ/V2H(P)
SoC, as used on the RZ/V2H EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513125858.251064-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The VHE hyp code has recently gained a few ISBs. Simplify this to one
unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary
ISB from the kvm_call_hyp_ret() macro.
While kvm_call_hyp_ret() is also used to invoke
__vgic_v3_get_gic_config(), but no ISB is necessary in that case either.
For the moment, an ISB is left in kvm_call_hyp(), as there are many more
users, and removing the ISB would require a more thorough audit.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We no longer use cpacr_clear_set().
Remove cpacr_clear_set() and its helper functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hyp code FPSIMD/SVE/SME trap handling logic has some rather messy
open-coded manipulation of CPTR/CPACR. This is benign for non-nested
guests, but broken for nested guests, as the guest hypervisor's CPTR
configuration is not taken into account.
Consider the case where L0 provides FPSIMD+SVE to an L1 guest
hypervisor, and the L1 guest hypervisor only provides FPSIMD to an L2
guest (with L1 configuring CPTR/CPACR to trap SVE usage from L2). If the
L2 guest triggers an FPSIMD trap to the L0 hypervisor,
kvm_hyp_handle_fpsimd() will see that the vCPU supports FPSIMD+SVE, and
will configure CPTR/CPACR to NOT trap FPSIMD+SVE before returning to the
L2 guest. Consequently the L2 guest would be able to manipulate SVE
state even though the L1 hypervisor had configured CPTR/CPACR to forbid
this.
Clean this up, and fix the nested virt issue by always using
__deactivate_cptr_traps() and __activate_cptr_traps() to manage the CPTR
traps. This removes the need for the ad-hoc fixup in
kvm_hyp_save_fpsimd_host(), and ensures that any guest hypervisor
configuration of CPTR/CPACR is taken into account.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
There's no need for fpsimd_sve_sync() to write to CPTR/CPACR. All
relevant traps are always disabled earlier within __kvm_vcpu_run(), when
__deactivate_cptr_traps() configures CPTR/CPACR.
With irrelevant details elided, the flow is:
handle___kvm_vcpu_run(...)
{
flush_hyp_vcpu(...) {
fpsimd_sve_flush(...);
}
__kvm_vcpu_run(...) {
__activate_traps(...) {
__activate_cptr_traps(...);
}
do {
__guest_enter(...);
} while (...);
__deactivate_traps(....) {
__deactivate_cptr_traps(...);
}
}
sync_hyp_vcpu(...) {
fpsimd_sve_sync(...);
}
}
Remove the unnecessary write to CPTR/CPACR. An ISB is still necessary,
so a comment is added to describe this requirement.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The NVHE/HVHE and VHE modes have separate implementations of
__activate_cptr_traps() and __deactivate_cptr_traps() in their
respective switch.c files. There's some duplication of logic, and it's
not currently possible to reuse this logic elsewhere.
Move the logic into the common switch.h header so that it can be reused,
and de-duplicate the common logic.
This rework changes the way SVE traps are deactivated in VHE mode,
aligning it with NVHE/HVHE modes:
* Before this patch, VHE's __deactivate_cptr_traps() would
unconditionally enable SVE for host EL2 (but not EL0), regardless of
whether the ARM64_SVE cpucap was set.
* After this patch, VHE's __deactivate_cptr_traps() will take the
ARM64_SVE cpucap into account. When ARM64_SVE is not set, SVE will be
trapped from EL2 and below.
The old and new behaviour are both benign:
* When ARM64_SVE is not set, the host will not touch SVE state, and will
not reconfigure SVE traps. Host EL0 access to SVE will be trapped as
expected.
* When ARM64_SVE is set, the host will configure EL0 SVE traps before
returning to EL0 as part of reloading the EL0 FPSIMD/SVE/SME state.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently there is no ISB between __deactivate_cptr_traps() disabling
traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating
registers potentially affected by CPTR traps.
When NV is not in use, this is safe because the relevant registers are
only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this
also implies that SVE traps affecting EL2 have been deactivated prior to
__guest_entry().
When NV is in use, a guest hypervisor may have configured SVE traps for
a nested context, and so it is necessary to have an ISB between
__deactivate_cptr_traps() and fpsimd_lazy_switch_to_host().
Due to the current lack of an ISB, when a guest hypervisor enables SVE
traps in CPTR, the host can take an unexpected SVE trap from within
fpsimd_lazy_switch_to_host(), e.g.
| Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kvm_vcpu_run+0x6f4/0x844
| lr : __kvm_vcpu_run+0x150/0x844
| sp : ffff800083903a60
| x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000
| x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0
| x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000
| x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70
| x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000
| x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000
| Kernel panic - not syncing: Unhandled exception
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| panic+0x168/0x360
| __panic_unhandled+0x68/0x74
| el1h_64_irq_handler+0x0/0x24
| el1h_64_sync+0x6c/0x70
| __kvm_vcpu_run+0x6f4/0x844 (P)
| kvm_arm_vcpu_enter_exit+0x64/0xa0
| kvm_arch_vcpu_ioctl_run+0x21c/0x870
| kvm_vcpu_ioctl+0x1a8/0x9d0
| __arm64_sys_ioctl+0xb4/0xf4
| invoke_syscall+0x48/0x104
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x30/0xcc
| el0t_64_sync_handler+0x10c/0x138
| el0t_64_sync+0x198/0x19c
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0000,000002c0,02df4fb9,97ee773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---
Fix this by adding an ISB between __deactivate_traps() and
fpsimd_lazy_switch_to_host().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When KVM runs in non-protected VHE mode, there's no context
synchronization event between __debug_switch_to_host() restoring the
host debug registers and __kvm_vcpu_run() unmasking debug exceptions.
Due to this, it's theoretically possible for the host to take an
unexpected debug exception due to the stale guest configuration.
This cannot happen in NVHE/HVHE mode as debug exceptions are masked in
the hyp code, and the exception return to the host will provide the
necessary context synchronization before debug exceptions can be taken.
For now, avoid the problem by adding an ISB after VHE hyp code restores
the host debug registers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250617133718.4014181-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-
Note, the same bug was fixed in x86 by commit bcda70c56f ("KVM: x86:
Explicitly treat routing entry type changes as changes").
Fixes: 4bf3693d36 ("KVM: arm64: Unmap vLPIs affected by changes to GSI routing information")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-3-seanjc@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Wei-Lin reports that the tracking of shadow list registers is
majorly broken when resync'ing the L2 state after a run, as
we confuse the guest's LR index with the host's, potentially
losing the interrupt state.
While this could be fixed by adding yet another side index to
track it (Wei-Lin's fix), it may be better to refactor this
code to avoid having a side index altogether, limiting the
risk to introduce this class of bugs.
A key observation is that the shadow index is always the number
of bits in the lr_map bitmap. With that, the parallel indexing
scheme can be completely dropped.
While doing this, introduce a couple of helpers that abstract
the index conversion and some of the LR repainting, making the
whole exercise much simpler.
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250614145721.2504524-1-r09922117@csie.ntu.edu.tw
Link: https://lore.kernel.org/r/86qzzkc5xa.wl-maz@kernel.org
The RTC hardware module present on S32G based SoCs tracks clock time
during system suspend and it is used as a wakeup source on S32G2/S32G3
architecture.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IMX8MPDS Table 37 [1] shows that the max SPI master read frequency
depends on the pins the interface is muxed behind with ECSPI2
muxed behind ECSPI2 supporting up to 25MHz.
Adjust the spi-max-frequency based on these findings.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPIEC
Fixes: 531936b218 ("arm64: dts: imx8mp-venice-gw74xx: update to revB PCB")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IMX8MPDS Table 37 [1] shows that the max SPI master read frequency
depends on the pins the interface is muxed behind with ECSPI2
muxed behind ECSPI2 supporting up to 25MHz.
Adjust the spi-max-frequency based on these findings.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPIEC
Fixes: 2b3ab9d81a ("arm64: dts: imx8mp-venice-gw73xx: add TPM device")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IMX8MPDS Table 37 [1] shows that the max SPI master read frequency
depends on the pins the interface is muxed behind with ECSPI2
muxed behind ECSPI2 supporting up to 25MHz.
Adjust the spi-max-frequency based on these findings.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPIEC
Fixes: 5016f22028 ("arm64: dts: imx8mp-venice-gw72xx: add TPM device")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit da5dd31efd ("gpio: vf610: Switch to gpio-mmio"),
the vf610 GPIO driver no longer uses the static number 32 for
gc->ngpio. This allows users to configure the number of GPIOs
per port.
And some gpio controllers did have less pads. So add 'ngpios' here,
this can save some memory when request bitmap, and also show user
more accurate information when use gpio tools.
Besides, some gpio controllers have hole in the gpio ranges, so use
'gpio-reserved-ranges' to cover that, then the gpioinfo tool show the
correct result.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT entries for the sm8650 iris decoder.
Since the firmware is required to be signed, only enable
on Qualcomm development boards where the firmware is
available.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250613-topic-sm8x50-upstream-iris-8650-dt-v4-1-35ea7952f2d2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix a regression in the arm64 Poly1305 code
- Fix a couple compiler warnings
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaFMXvhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1wvAP4mnXzTFhaGjaz/ZXwnD++H69s/rKH+
EKrNpcqYiwnn2wD/RLREXAnkrU2WRZCSI4H1D2J9NbQe+X9xZ7ieJpsPNgM=
=AXpO
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a regression in the arm64 Poly1305 code
- Fix a couple compiler warnings
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto/poly1305: Fix arm64's poly1305_blocks_arch()
lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older
lib/crypto: Annotate crypto strings with nonstring
This dts adds support for BQ Aquaris X5 Plus (Longcheer L9360) released
in 2016.
Add a device tree with initial support for:
- GPIO keys
- NFC
- SDHCI
- Status LED
- Touchscreen
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250615-bqx5plus-v2-4-72b45c84237d@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 and qcom,sps-dma@7ac4000 [1] so adding
"qcom,controlled-remotely" upstream matches the behavior of the
downstream/vendor kernel.
Adding this fixes booting Longcheer L9360.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.3.7.c26/arch/arm/boot/dts/qcom/msm8976.dtsi#L1149-1163
Fixes: 0484d3ce09 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250615-bqx5plus-v2-1-72b45c84237d@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In preparation for switching to the architected timer as the primary
clockevents device, mark the cpuidle nodes with the 'local-timer-stop'
property to indicate that an alternative clockevents device must be
used for waking up from the "c2" idle state.
Signed-off-by: Will Deacon <willdeacon@google.com>
[Original commit from a896fd9863]
Signed-off-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Youngmin Nam <youngmin.nam@samsung.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Fixes: ea89fdf24f ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250611-gs101-cpuidle-v2-1-4fa811ec404d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Universal Serial Interface (USI) supports three serial protocol
like uart, i2c and spi. ExynosAutov920 has 18 instances of USI.
Add spi nodes for all the instances.
Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Link: https://lore.kernel.org/r/20250613062208.978641-1-faraz.ata@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add ability to build pinctrl for stm32mp257 as a kernel module.
Add kernel-doc to the exported symbols.
Signed-off-by: Stephane Danieau <stephane.danieau@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/20250610143042.295376-5-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the camera subsystem on the SM8550 Qualcomm SoC. This
includes bringing up the CSIPHY, CSID, VFE/RDI interfaces.
SM8550 provides
- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 8 x CSI PHY
Co-developed-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250612-sm8550-camss-v2-1-ed370124075e@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the CTI device of the camera block to prevent potential NoC errors
during AMBA bus device matching.
The clocks for the Qualcomm Debug Subsystem (QDSS) are managed by aoss_qmp
through a mailbox. However, the camera block resides outside the AP domain,
meaning its QDSS clock cannot be controlled via aoss_qmp.
Fixes: bf46963055 ("arm64: dts: qcom: qcs615: Add coresight nodes")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611030003.3801-1-jie.gan@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable all remoteproc nodes on the qcs615-ride board and point to the
appropriate firmware files to allow proper functioning of the remote
processors.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250526-add_qcs615_remoteproc_support-v4-6-06a7d8bed0b5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a simple-mfd representing IMEM on QCS615 and define the PIL
relocation info region as its child. The PIL region in IMEM is used to
communicate load addresses of remoteproc to post mortem debug tools, so
that these tools can collect ramdumps.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250526-add_qcs615_remoteproc_support-v4-4-06a7d8bed0b5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Shared Memory Point to Point (SMP2P) protocol facilitates
communication of a single 32-bit value between two processors.
Add these two nodes for remoteproc enablement on QCS615 SoC.
Signed-off-by: Kyle Deng <quic_chunkaid@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250526-add_qcs615_remoteproc_support-v4-3-06a7d8bed0b5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initial support for Asus Zenbook A14. Particular moddel exists
in X1-26-100, X1P-42-100 (UX3407QA) and X1E-78-100 (UX3407RA).
Mostly similar to other X1-based laptops. Notable differences are:
* Wifi/Bluetooth combo being Qualcomm FastConnect 6900 on UX3407QA
and Qualcomm FastConnect 7800 on UX3407RA
* USB Type-C retimers are Parade PS8833, appear to behave identical
to Parade PS8830
* gpio90 is TZ protected
Working:
* Keyboard
* Touchpad
* NVME
* Lid switch
* Camera LED
* eDP (FHD OLED, SDC420D) with brightness control
* Bluetooth, WiFi (WCN6855)
* USB Type-A port
* USB Type-C ports in USB2/USB3/DP (both orientations)
* aDSP/cDPS firmware loading, battery info
* Sleep/suspend, nothing visibly broken on resume
Out of scope of this series:
* Audio (Speakers/microphones/headphone jack)
* Camera (OmniVision OV02C10)
* HDMI (Parade PS185HDM)
* EC
Add dtsi and create two configurations for UX3407QA, UX3407RA.
Tested on UX3407QA with X1-26-100.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250523131605.6624-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We need more than what is currently described, expand the region to its
actual boundaries.
Fixes: ede638c42c ("arm64: dts: qcom: sc7180: Add IMEM and pil info regions")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523-topic-ipa_mem_dts-v1-3-f7aa94fac1ab@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We need more than what is currently described, expand the region to its
actual boundaries.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 948f6161c6 ("arm64: dts: qcom: sdm845: Add IMEM and PIL info region")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523-topic-ipa_mem_dts-v1-2-f7aa94fac1ab@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
An infinite loop has been created by the Coresight devices. When only a
source device is enabled, the coresight_find_activated_sysfs_sink function
is recursively invoked in an attempt to locate an active sink device,
ultimately leading to a stack overflow and system crash. Therefore, disable
the replicator1 to break the infinite loop and prevent a potential stack
overflow.
replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out
| |
replicator1_in replicator_swao_in
| |
replicator0_out1 replicator_swao_out0
| |
replicator0_in funnel_in1_in3
| |
tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out
[call trace]
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
panic+0x340/0x3b0
nmi_panic+0x94/0xa0
panic_bad_stack+0x114/0x138
handle_bad_stack+0x34/0xb8
__bad_stack+0x78/0x80
coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
...
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_enable_sysfs+0x80/0x2a0 [coresight]
side effect after the change:
Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks.
Fixes: bf46963055 ("arm64: dts: qcom: qcs615: Add coresight nodes")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250522005016.2148-1-jie.gan@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the APR node and its associated services required for audio on
the SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250321-sm6350-apr-v1-1-7805ce7b4dcf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable video nodes on the sa8775p-ride board and point to the
appropriate firmware files.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/20250421-dtbinding-v5-3-363c1c05bc80@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add OPP tables required to scale DDR and L3 per freq-domain
on SA8775P platform.
If a single OPP table is used for both CPU domains, then
_allocate_opp_table() won't be invoked for CPU4 but instead
CPU4 will be added as device under the CPU0 OPP table. Due
to this, dev_pm_opp_of_find_icc_paths() won't be invoked for
CPU4 device and hence CPU4 won't be able to independently scale
it's interconnects. Both CPU0 and CPU4 devices will scale the
same ICC path which can lead to one device overwriting the BW
vote placed by other device. Hence CPU0 and CPU4 require separate
OPP tables to allow independent scaling of DDR and L3 frequencies
for each CPU domain, with the final DDR and L3 frequencies being
an aggregate of both.
Co-developed-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415095343.32125-8-quic_rlaggysh@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Epoch Subsystem (EPSS) L3 interconnect provider node on SA8775P
SoCs. L3 instances on this SoC are same as SM8250 and SC7280 SoCs.
These SoCs use EPSS_L3_PERF register instead of REG_L3_VOTE register for
programming the perf level. This is taken care in the data associated
with the target specific compatible. Since, the HW is same in the all
SoCs with EPSS support, using the same generic compatible for all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20250415095343.32125-7-quic_rlaggysh@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the example of the recently added apq8016-sbc-usb-host.dtso and
convert apq8016-sbc-d3-camera-mezzanine.dts to a DT overlay that can be
applied on top of the apq8016-sbc.dtb. This makes it more clear that
this is not a special type of DB410c but just an addon board that can
be added on top.
Functionally there should not be any difference since
apq8016-sbc-d3-camera-mezzanine.dtb is still generated as before
(but now by applying the overlay on top of apq8016-sbc.dtb).
Since dtc does not know that there are default #address/size-cells in
msm8916.dtsi, repeat those in the overlay to avoid dtc warnings because
it expects the wrong amount of address/size-cells.
It would be nice to have a generic overlay for the D3 camera mezzanine
(that can be applied to all 96Boards) but that's much more complicated
than providing a board-specific DT overlay as intermediate step.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250408-apq8016-sbc-camera-dtso-v1-1-cdf1cd41bda6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the WiFi/BT nodes for XPS and describe the regulators for the WCN7850
combo chip using the new power sequencing bindings. All voltages are
derived from chained fixed regulators controlled using a single GPIO.
Based on the commit d09ab685a8 ("arm64: dts: qcom: x1e80100-qcp: Add
WiFi/BT pwrseq").
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor1@dell.com>
Link: https://lore.kernel.org/r/20250331204610.526672-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add QMP handle which is used to send QMP command to always on processor
to populate DDR stats. Add QMP handle for SM8450/SM8550/SM8650/SM8750.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611-ddr_stats_-v5-3-24b16dd67c9c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling camera clock controller for all Qualcomm SM8250
boards the explicit control of the clock controller status can be removed
from the RB5 vision mezzanine dts overlay file.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable camera clock controller on all Qualcomm SM8250 derived boards
by default due to the established agreement of having all clock
controllers enabled.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For some reason arm64's Poly1305 code got changed to ignore the padbit
argument. As a result, the output is incorrect when the message length
is not a multiple of 16 (which is not reached with the standard
ChaCha20Poly1305, but bcachefs could reach this). Fix this.
Fixes: a59e5468a9 ("crypto: arm64/poly1305 - Add block-only interface")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20250616010654.367302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
SND_SOC_ES8328 is selected by SND_SOC_ES8328_I2C. SND_SOC_WCD939X is
selected by SND_SOC_WCD939X. None of these are user-visible options so
their presence in defconfig is redundant.
Link: https://lore.kernel.org/r/20250612134421.95782-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Sound drivers are not essential to boot boards or mount rootfs,
therefore in effort to reduce the size of kernel image (and boot images)
switch the ASoC drivers to modules to decrease the size:
vmlinux: 154528 kB -> 152864 kB
Image: 39391 kB -> 39067 kB
No difference in resulting include/generated/autoconf.h, except making
modules: SND_SOC_SAMSUNG, SND_SOC_SDCA_OPTIONAL, SND_SOC_APPLE_MCA,
SND_TIMER, SND_COMPRESS_OFFLOAD, SND_PCM, SND_SOC_SOF_OF and
SND_DMAENGINE_PCM.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612134421.95782-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to pass
only the "untouched" addresses and flipping the shared/private bit
in the implementation.
- Disable SEV-SNP support on initialization failure
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhMVEQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCYwgAoqYz+RTcIx6EwHD/kN/9maUcQVl1
MMmXqfF2jQYmTvk7ocEW1qwx/SV0kB+H9LOThV8SWTvVxDbNqAaUWRDz+wcz3zaO
6/sUwz4dtU4XaTgxYhhB82lsPtJHyM+FM+bNL4rFFnrA1tZ93wRsMEeryZ5h960V
C1Bc+PLBdpj+S3gQGvxeMxnG/n0oOAcecUqQa3ViIOKSfZEc/11+BjjvfvkYqExq
s206faKSqor8xVXUbgtOk3LZreIExj/mD+pwMiUBvG0H0g4wnaG7Arc41QCFMowF
4l4sQVMWFZiKQvQZSfdQOeNsXcepWw0qISK7UeoWpLnpM78uUfCS6iG1rA==
=Hc3G
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
pass only the "untouched" addresses and flipping the shared/private
bit in the implementation.
- Disable SEV-SNP support on initialization failure
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
KVM: SEV: Disable SEV-SNP support on initialization failure
KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
KVM: arm64: Add RMW specific sysreg accessor
KVM: arm64: Add assignment-specific sysreg accessor
Move the {address,size}-cells property from the (disabled) touchbar screen
mipi node inside the dtsi file to the model-specific dts file where it's
enabled to fix the following W=1 warnings:
t8103.dtsi:404.34-433.5: Warning (avoid_unnecessary_addr_size): /soc/dsi@228600000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
t8112.dtsi:419.34-448.5: Warning (avoid_unnecessary_addr_size): /soc/dsi@228600000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
Fixes: 7275e795e5 ("arm64: dts: apple: Add touchbar screen nodes")
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250611-display-pipe-mipi-warning-v1-1-bd80ba2c0eea@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
Fix the following warning by dropping #{address,size}-cells from the SPI
NOR node which only has a single child node without reg property:
spi1-nvram.dtsi:19.10-38.4: Warning (avoid_unnecessary_addr_size): /soc/spi@235104000/flash@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
Fixes: 3febe9de5c ("arm64: dts: apple: Add SPI NOR nvram partition to all devices")
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250610-apple-dts-warnings-v1-1-70b53e8108a0@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
Starting with commit e6ef4f8ede ("gpio: vf610: make irq_chip immutable")
gpio-vf610 supports locking GPIO being used for IRQ. This already prevents
configuring the GPIO as output, so there is no need for a GPIO hog.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa9352 is only using LPDDR4X, so the BUCK2 regulator should be fixed
at 600MV.
Fixes: d2858e6bd3 ("arm64: dts: freescale: imx93-tqma9352: Add PMIC node")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently we call gcs_free() during flush_gcs() to reset the thread
state for GCS. This includes unmapping any kernel allocated GCS, but
this is redundant when doing a flush_thread() since we are
reinitialising the thread memory too. Inline the reinitialisation of the
thread struct.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250611-arm64-gcs-flush-thread-v1-1-cc26feeddabd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add required dt node for CMU_HSI2 block, which
provides clocks to ufs and ethernet IPs
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250529112640.1646740-5-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Commit 9c006972c3 ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3 ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()")
Cc: stable@vger.kernel.org
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Samsung Galaxy S22+ (SM-S906B), codenamed g0s, is a mobile phone from
2022. It features 8GB RAM, 128/256GB UFS 3.1, Exynos 2200 SoC and a
1080x2340 Dynamic AMOLED display.
This device has an issue where cpu2 and cpu3 fail to come up
consistently, which leads to a hang later in the boot process. Disable
them until the problem is figured out.
This initial device tree configures simple-framebuffer, volume-up key and
usb.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos 2200 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy S22
(r0s), S22+ (g0s), S22 Ultra (b0s) Add minimal support for that SoC,
including psci, pmu, chipid, architecture timer and mct, pinctrl,
clocks and usb.
The devices using this SoC suffer from an issue caused by the stock
Samsung bootloader, as it doesn't configure CNTFRQ_EL0. Hence it's
needed to hardcode the adequate frequency in the timer node,
otherwise the kernel panics.
Further platform support will be added over time.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Make pte_swp_exclusive return bool instead of int. This will better
reflect how pte_swp_exclusive is actually used in the code.
This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not
returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper
32-bits of PTE (like on alpha).
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/
Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/
[ Applied as the 'sed' script Al suggested - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 8-core SKUs of the X1 family have a different sensor configuration.
Override it to expose what the sensors really measure.
Fixes: f08edb5299 ("arm64: dts: qcom: Add X1P42100 SoC and CRD")
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250520-topic-x1p4_tsens-v2-1-9687b789a4fb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device nodes for most of the sound support - WSA884x smart speakers,
WCD9395 audio codec (headset) and sound card - which allows sound
playback via speakers and recording via AMIC microphones. Changes bring
necessary foundation for headset playback/recording via USB, but that
part is not yet ready.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-3-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device nodes for most of the sound support - WSA883x smart speakers,
WCD9395 audio codec (headset) and sound card - which allows sound
playback via speakers and recording via DMIC microphones. Changes bring
necessary foundation for headset playback/recording via USB, but that
part is not yet ready.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-2-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
-----BEGIN PGP SIGNATURE-----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=OMHL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
At least from Linux, these buses are not in use. Remove them from the dt.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-hp-x14-v3-2-35d5b50efae0@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The usb_1_1 port doesn't have the PS8830 repeater, but apparently some
MUX for DP altmode control. After a suggestion from sgerhold on
'#aarch64-laptops' I added gpio-sbu-mux nodes from the x1e80100-QCP
tree, and this appears to work well. It is still guesswork, but
working guesswork.
Added and rewired for usb_1_1
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20250610-hp-x14-v3-1-35d5b50efae0@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the drivers for camera clock controllers on Qualcomm SM8550 and
SM8650 SoC (enabled in all DTS files like SM8550-HDK or SM8650-HDK) and
video clock controllers on Qualcomm SM8450 SoC (enabled in SM8450-HDK
DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605173608.217495-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add in the mt8395-genio-1200-evk devicetree the memory regions for the
Audio DSP (ADSP) and Audio Front-End (AFE), and a sound card node
configured to use the ADSP.
This enables audio output through the 3.5mm headphone jacks (speaker or
earphone), available on the board.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250526-mt8395-genio-1200-evk-sound-v1-1-142fb15292c5@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some MediaTek platforms already reserve a small block of memory for the
audio frontend. These platforms reserve it at a fixed address, though it
is unclear if that is due to hardware access restrictions or simply
compacting the reserved memory blocks together.
Reserve the same size of memory on the MT8192 Asurada family as well, to
align with the other MediaTek-based ChromeOS platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250424102509.1083185-14-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some MediaTek platforms already reserve a small block of memory for the
audio frontend. These platforms reserve it at a fixed address, though it
is unclear if that is due to hardware access restrictions or simply
compacting the reserved memory blocks together.
Reserve the same size of memory on the MT8186 Corsola family as well, to
align with the other MediaTek-based ChromeOS platforms. This also helps
with memory starvation as these devices sometimes end up in low memory
conditions.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250424102509.1083185-13-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some MediaTek platforms already reserve a small block of memory for the
audio frontend. These platforms reserve it at a fixed address, though it
is unclear if that is due to hardware access restrictions or simply
compacting the reserved memory blocks together.
Reserve the same size of memory on the MT8183 Kukui & Jacuzzi families
as well, to align with the other MediaTek-based ChromeOS platforms. This
also helps with memory starvation as these devices commonly end up in
low memory conditions.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250424102509.1083185-12-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some MediaTek platforms already reserve a small block of memory for the
audio frontend. These platforms reserve it at a fixed address, though it
is unclear if that is due to hardware access restrictions or simply
compacting the reserved memory blocks together.
Reserve the same size of memory on the MT8173 as well, to align with the
other platforms. This also helps with memory starvation as these devices
commonly end up in low memory conditions.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250424102509.1083185-11-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Hook up the gpu as a passive cooling device to the thermal zones' alert
trip point just like the cpu.
The gpu here consists of 3D GPU, 2D GPU and NPU.
One way to test would be to set one "alert" trip point low enough
and watch the cooling device state increase:
echo 10000 > /sys/class/thermal/thermal_zone0/trip_point_0_temp
watch cat /sys/class/thermal/cooling_device*/cur_state
And of course set the trip point back to its original value and watch
the cooling device states jump to 0 again.
Signed-off-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I.MX95 I3C only need two clocks so add clock fix. Add "nxp,imx95-i3c"
compatible string for all imx95 i3c nodes.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the IRIS video-codec node on QCS8300 platform to support video
functionality.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250501-qcs8300_iris-v7-4-b229d5347990@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree nodes for the DSI0 and DSI1 controllers
with their corresponding PHYs found on Qualcomm SA8775P SoC.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250604071851.1438612-2-quic_amakhija@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The default interrupt parent is a parent node containing
"#interrupt-cells", so an explicit "interrupt-parent" is not necessary.
Fixes these dtschema warnings:
(arm,gic-400): v2m@70000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@60000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@50000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@40000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@30000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@20000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@10000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@0: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609203705.2852500-1-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-23-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-22-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-21-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-10-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-8-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
