mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 06:09:56 +00:00
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
PP1516 are Touchscreen devices built around the PX30 SoC and companion devices to PX30-Cobra, again with multiple display options. The devices feature an EMMC, OTG port and a 720x1280 display with a touchscreen and camera Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20250514150745.2437804-7-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Heiko Stuebner
Heiko Stuebner
parent
b8310e4d39
commit
56198acdbf
@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3146w-a2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3148w.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-video-demo.dtbo
|
||||
|
||||
39
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
Normal file
39
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
Normal file
@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-pp1516.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems PP-1516 with LTK050H3146W-A2 Display";
|
||||
compatible = "tsd,px30-pp1516-ltk050h3146w-a2", "tsd,px30-pp1516", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3146w-a2";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
39
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
Normal file
39
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
Normal file
@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-pp1516.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems PP-1516 with LTK050H3148W Display";
|
||||
compatible = "tsd,px30-pp1516-ltk050h3148w", "tsd,px30-pp1516", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3148w";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
602
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
Normal file
602
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
Normal file
@ -0,0 +1,602 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "px30.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &emmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial5:115200n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm1 0 1000 0>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
pinctrl-0 = <&emmc_reset>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&debug_led_pin>, <&heartbeat_led_pin>;
|
||||
|
||||
/*
|
||||
* LED2 on the PCB, left of the USB-C connector.
|
||||
* Typically NOT populated.
|
||||
*/
|
||||
debug: led-0 {
|
||||
label = "debug";
|
||||
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
};
|
||||
|
||||
/*
|
||||
* LED14 on the PCB, left of the PX30 SoC.
|
||||
* Typically NOT populated.
|
||||
*/
|
||||
heartbeat: led-1 {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_cam_avdd: regulator-vcc-cam-avdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_avdd";
|
||||
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_avdd_en>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
vin-supply = <&vcc_2v8>;
|
||||
};
|
||||
|
||||
vcc_cam_dovdd: regulator-vcc-cam-dovdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_dovdd";
|
||||
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_dovdd_en>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc_cam_dvdd: regulator-vcc-cam-dvdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_dvdd";
|
||||
gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_dvdd_en>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vcc_lens_afvdd: regulator-vcc-lens-afvdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_lens_afvdd";
|
||||
gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_afvdd_en>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
vin-supply = <&vcc_2v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&csi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
/*
|
||||
* For hs200 support, U-Boot would have to set the RK809 DCDC4
|
||||
* rail to 1.8V from the default of 3.0V. It doesn't do that on
|
||||
* devices out in the field, so disable hs200.
|
||||
* mmc-hs200-1_8v;
|
||||
*/
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* I2C0 = PMIC, Touchscreen */
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@14 {
|
||||
compatible = "goodix,gt911";
|
||||
reg = <0x14>;
|
||||
AVDD28-supply = <&vcc_2v8>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
|
||||
irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tch_int &tch_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
VDDIO-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xin32k";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc_3v3>;
|
||||
vcc6-supply = <&vcc_3v3>;
|
||||
vcc7-supply = <&vcc_3v3>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v0_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: DCDC_REG5 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v0: LDO_REG3 {
|
||||
regulator-name = "vcc_1v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v8: LDO_REG4 {
|
||||
regulator-name = "vcc_2v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG6 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: LDO_REG7 {
|
||||
regulator-name = "vcc_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_lcd: LDO_REG8 {
|
||||
regulator-name = "vcc_1v8_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG9 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* I2C2 = Accelerometer + Camera */
|
||||
&i2c2 {
|
||||
/* MEMSIC MXC4005 accelerometer is rated for I2C Fast Mode (<=400KHz) */
|
||||
/* OmniVision OV5675 camera is rated for I2C Fast Mode (<=400KHz) */
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
focus: focus@c {
|
||||
compatible = "dongwoon,dw9714";
|
||||
reg = <0xc>;
|
||||
vcc-supply = <&vcc_lens_afvdd>;
|
||||
};
|
||||
|
||||
accel@15 {
|
||||
compatible = "memsic,mxc4005";
|
||||
reg = <0x15>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&accel_int>;
|
||||
};
|
||||
|
||||
camera@36 {
|
||||
compatible = "ovti,ov5675";
|
||||
reg = <0x36>;
|
||||
clocks = <&cru SCLK_CIF_OUT>;
|
||||
assigned-clocks = <&cru SCLK_CIF_OUT>;
|
||||
assigned-clock-rates = <19200000>;
|
||||
avdd-supply = <&vcc_cam_avdd>;
|
||||
dvdd-supply = <&vcc_cam_dvdd>;
|
||||
dovdd-supply = <&vcc_cam_dovdd>;
|
||||
lens-focus = <&focus>;
|
||||
orientation = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cif_clkout_m0 &cam_pwdn>;
|
||||
reset-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
rotation = <0>;
|
||||
|
||||
port {
|
||||
ucam_out: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam>;
|
||||
data-lanes = <1 2>;
|
||||
link-frequencies = /bits/ 64 <450000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio1-supply = <&vcc_sdio>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_1v8>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
mipi_in_ucam: endpoint@0 {
|
||||
reg = <0>;
|
||||
data-lanes = <1 2>;
|
||||
remote-endpoint = <&ucam_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&isp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
accel {
|
||||
accel_int: accel-int {
|
||||
rockchip,pins =
|
||||
<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
camera {
|
||||
cam_afvdd_en: cam-afvdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_avdd_en: cam-avdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_dovdd_en: cam-dovdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_dvdd_en: cam-dvdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_pwdn: cam-pwdn {
|
||||
rockchip,pins =
|
||||
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
rockchip,pins =
|
||||
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
debug_led_pin: debug-led-pin {
|
||||
rockchip,pins =
|
||||
<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
heartbeat_led_pin: heartbeat-led-pin {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
dsp_rst: dsp-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
tch_int: tch-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
tch_rst: tch-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc_3v3>;
|
||||
pmuio2-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-0 = <&uart5_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user