Add overlay to enable the PCIE1 instance of PCIe on AM68-SK-Base-Board in
Endpoint mode of operation. PCIE1 on AM68-SK-Base-Board supports x2 Lane
operation unlike its counterpart on J721S2-EVM which supports x1 Lane.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add overlay to enable the PCIE1 instance of PCIe on J721E-EVM in Endpoint
mode of operation. Additionally, in order to support both PCIE0 and PCIE1
in Endpoint Mode of operation, enable applying device-tree overlays on
"k3-j721e-evm-pcie0-ep.dtb", thereby allowing the overlay for PCIE1 in
Endpoint mode to be applied on the aforementioned DTB.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The list of "dtbs" should contain the resultant "dtb" formed by applying
the "dtbo" overlay on the base "dtb", rather than the "dtbo" itself.
Hence, change "k3-j7200-evm-pcie1-ep.dtbo" to "k3-j7200-evm-pcie1-ep.dtb"
in the list of "dtbs".
Fixes: f43ec89bbc ("arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
CTRLMMR_MCU_SPI1_CTRL register controls if MCU_SPI1 is directly
connected to SPI3 in the MAIN Domain (default) or if MCU_SPI1
and SPI3 are independently pinned out. By default, the field
SPI1_LINKDIS (Bit 0) is set to 0h. In order to disable the direct
connection, the SPI1_LINKDIS (Bit 0) needs to be set to 1h. Model
this functionality as a "reg-mux" device and based on the idle-state
property, enable/disable the connection bewtween MCU_SPI1 and MAIN_SPI3.
The register field description has been referred from J7200 TRM [1]
(Table 5-517. CTRLMMR_MCU_SPI1_CTRL Register Field Descriptions).
[1] https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://lore.kernel.org/r/20241127075644.210759-1-a-dutta@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the "bootph-all" property to the "usb0" device-tree node. This is
required for the USB0 instance of USB to be functional at all stages
of USB DFU boot.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241220054550.153360-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The GIC Redistributor control range is mapped twice. Remove the extra
entry from the reg range.
Fixes: 5fc6b1b626 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Reported-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20241210-am62-gic-fixup-v1-2-758b4d5b4a0a@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The GIC Redistributor control register range is mapped twice. Remove
the extra entry from the reg range.
Fixes: f1d17330a5 ("arm64: dts: ti: Introduce base support for AM62x SoC")
Reported-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20241210-am62-gic-fixup-v1-1-758b4d5b4a0a@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add nodes for the R5F and C7x cores on the SoC. This includes the mailbox
and memory carveouts used by these remote cores.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241203174114.94751-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Mailbox nodes defined in the top-level J722s/AM62p SoC dtsi files are
incomplete and may not be functional unless they are extended with a
chosen interrupt and connection to a remote processor.
Disable the Mailbox nodes in the dtsi files and only enable the ones
that are actually used on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241203174114.94751-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This node is already defined in the included k3-am62x-sk-common.dtsi.
Remove this redefinition.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241203164031.20211-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable support for mcu_i2c0 and add pinmux required to bring out the
mcu_i2c0 signals on 40-pin RPi expansion header on the J722S EVM.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Shreyash Sinha <s-sinha@ti.com>
Reviewed-by: Prasanth Babu Mantena <p-mantena@ti.com>
Link: https://lore.kernel.org/r/20241105091224.23453-1-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Ethernet boot requires CPSW node to be present starting from R5 SPL stage.
Add bootph-all property in CPSW MAC's eFuse node cpsw_mac_syscon to enable
this node during SPL stage along with later boot stages so that CPSW port
will get static MAC address.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20241114165331.1279065-1-c-vankar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove "ti,(rx|tx)-fifo-depth" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
There are similar properties, but DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
represents the default value so adding them is not necessary.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241115193359.3618020-1-robh@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
ICSSG has 7 available clocks per instance. Add all the cloks to ICSSG
nodes. ICSSG currently uses ICSSG_ICLK (clk id 20) which operates at
250MHz. Switch ICSSG clock to ICSSG_CORE clock (clk id 0) which operates at
333MHz.
ICSSG_CORE clock will help get the most out of ICSSG as more cycles are
needed to fully support all ICSSG features.
This commit also changes assigned-clock-parents of coreclk-mux to
ICSSG_CORE clock from ICSSG_ICLK.
Performance update in dual mac mode
With ICSSG_CORE Clk @ 333MHz
Tx throughput - 934 Mbps
Rx throughput - 914 Mbps,
With ICSSG_ICLK clk @ 250MHz,
Tx throughput - 920 Mbps
Rx throughput - 706 Mbps
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241113110955.3876045-3-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
In order for the MCU domain to access this PMIC, a regulator
needs to be marked appropriately otherwise it is not seen by SPL and
therefore not configured.
This is necessary if the MCU domain is to program the TPS6594 MCU ESM
state machine, which is required to wire up the watchdog in a manner
that will reset the board.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Enric Balletbo i Serra <eballetb@redhat.com>
Link: https://lore.kernel.org/r/20241113-b4-j784s4-tps6594-bootph-v4-2-102ddaa1bdc6@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
In order for the MCU domain to access this PMIC, a regulator
needs to be marked appropriately otherwise it is not seen by SPL and
therefore not configured.
This is necessary if the MCU domain is to program the TPS6594 MCU ESM
state machine, which is required to wire up the watchdog in a manner
that will reset the board.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Enric Balletbo i Serra <eballetb@redhat.com>
Link: https://lore.kernel.org/r/20241113-b4-j784s4-tps6594-bootph-v4-1-102ddaa1bdc6@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
After the SoC has entered the Deep Sleep mode, USB1 can be used to wakeup
the SoC based on USB events triggered by USB devices. This requires that
the pin corresponding to the Type-A connector remains pulled up even after
the SoC has entered the Deep Sleep mode. Hence, enable Deep Sleep pullup /
pulldown selection for the USB1_DRVVBUS pin and set its Deep Sleep state to
PULL_UP.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205120134.754664-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The behavior of pins in deep sleep mode can be configured by programming
the corresponding bits in the respective Pad Configuration register. Add
macros to support this.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205120134.754664-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the missing vcc-supply property to the EEPROM node which resolves
the following warning:
at24 1-0051: supply vcc not found, using dummy regulator
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241101131427.3815341-4-w.egorov@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Specify the regulator for the EEPROM supply voltage and associate it
with the EEPROM device. This resolves the following warning:
at24 0-0050: supply vcc not found, using dummy regulator
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241101131427.3815341-3-w.egorov@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Specify I/0 voltage & core supply regulators used by the SII902x
HDMI bridge and make them known to the bridge.
This resolves the following warning:
sii902x 1-0039: supply iovcc not found, using dummy regulator
sii902x 1-0039: supply cvcc12 not found, using dummy regulator
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241101131427.3815341-2-w.egorov@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The phyBOARD-Lyra connects only 16 pins to the SII902x HDMI bridge's RGB
input. The default 24-bit setting causes incorrect color output. Update
to 16-bit to match the hardware configuration.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241101131427.3815341-1-w.egorov@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Add another entry in the wkup_conf for the syscon node, and then use
that for the syscon in opp-table.
Marking entire wkup_conf as "syscon", "simple-mfd" is wrong and needs to
be addressed similar to how other child-nodes in wkup_conf are implemented
in the same file.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241104063707.3604302-1-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62Px reference board is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
6.6 of the SoC's data sheet[0] . Append the 1.4Ghz entry to the OPP
table to enable this frequency
[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241008132052.407994-5-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)
The OPPs available for the Cortex-A53s on the AM62Px can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
the OPP entries the SoC supports. A table of all these variants can be
found in its data sheet[0] for the AM62Px processor family.
Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.
[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241008132052.407994-4-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62Ax reference board is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
to enable this OPP
[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241008132052.407994-3-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)
The OPPs available for the Cortex-A53s on the AM62Ax can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
to only OPP entries the variant supports. A table of all these variants
can be found in it's data sheet[0] for the AM62Ax family.
Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.
[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241008132052.407994-2-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add Toradex Verdin Ivy carrier board support. One notable feature of Ivy
is the analog inputs. These inputs are multiplexed, allowing the same
input to measure either voltage or current. For current measurements,
a GPIO switch enables or disables the shunt resistor. This process is
automatically managed by the Linux kernel using the IIO and MUX
subsystems. Voltage measurement is always enabled, but the voltage
measured by the ADC is scaled by a cascade voltage divider. In the
device tree, the equivalent gain of the voltage divider is used, which
can be calculated as follows:
------------
+ |
.-.
R1=30K | |
| |
'-'
|-------------------
Analog Input (AIN) | |
.-. .-.
R2=10K | | R3=30K | |
| | | |
'-' '-'
| |
| |--------
| .-. +
| R4=10K | |
| | | ADC Input (Channels 0 and 1)
| '-'
- | | -
-----------| |--------
=== ===
GND GND
Vin = Analog Input (AIN)
Vout = ADC Input
Rth = Thevenin Equiv. Resistance
Vth = Thevenin Equiv. Voltage
RL = Load Resistor
R1 = 30K, R2 = 10K, R3 = 30K, R4 = 10K
RL = R4 = 10K
Rth = (R1 // R2) + R3 = 37500 Ohms
Vth = (Vin * R2) / (R1 + R2) = Vin/4;
Vout = (Vth * RL)/ (Rth + RL) = Vth/4.75 = Vin/19
Gain = Vout/Vin = 1/19
https://www.toradex.com/products/carrier-board/ivy-carrier-board
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240924120044.130913-4-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add a label to ti-ads1015 node to make it easier to reference it
from other nodes.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240924120044.130913-3-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Be default, R511 iand D19 are not populated on our phyBOARD-Electra.
This resistor and diode connect VCC_3V3_SW with VBAT and permanently
charge the RTC battery.
Enable trickle charge to charge the battery through the RTC.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240911124251.702590-3-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240911124251.702590-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240911124251.702590-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The bus-width property was moved to k3-am64-main.dtsi.
See commit 0ae3113a46 ("arm64: dts: ti: k3-am6*: Fix bus-width property
in MMC nodes")
Signed-off-by: John Ma <jma@phytec.com>
Link: https://lore.kernel.org/r/20240926184918.3342719-2-jma@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The bus-width property was moved to k3-am64-main.dtsi.
See commit 0ae3113a46 ("arm64: dts: ti: k3-am6*: Fix bus-width property
in MMC nodes")
Signed-off-by: John Ma <jma@phytec.com>
Link: https://lore.kernel.org/r/20240926184918.3342719-1-jma@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add overlay to enable the PCIe0 instance of PCIe on AM642-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240930103413.3085689-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add overlay to enable the PCIE1 instance of PCIe on J7200-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241001093426.3401765-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 316b80246b ("arm64: dts: ti: add verdin am62")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20241024130628.49650-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Fix Verdin AM62 on-SOM ADC compatible. Currently the hardware is not
correctly described in the DT, use the correct TI TLA2024 compatible that
matches what is assembled on the board.
The "ti,tla2024" compatible was introduced in Linux v5.19 and Verdin AM62
support was introduced in Linux v6.5.
The new DTB will not work on kernel older than v5.19, but this seems
unlikely to happen. U-Boot does not use the ADC node and a known Android 14
out-of-tree port uses a Linux Kernel 6.1.
With that said, despite this being a breaking change, it seems fair to
to not expect any regression because of it.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Link: https://lore.kernel.org/r/20241015113334.246110-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The clock IDs for multiple MCSPI instances across wakeup as
well as main domain in J7200 are incorrect when compared with
documentation [1]. This results in kernel crashes when the said
instances are enabled. Fix the clock ids to their appropriate
values.
[1]https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
Fixes: 8f6c475f4c ("arm64: dts: ti: k3-j7200: Add MCSPI nodes")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Link: https://lore.kernel.org/r/20241023104532.3438851-2-a-dutta@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Commit 0d0a0b4413 ("arm64: dts: ti: k3-j7200: fix main pinmux
range") split the main_pmx0 into two nodes: main_pmx0 and main_pmx1
due to a non-addressable region, but incorrectly represented the
ranges. As a result, the memory map for the pinctrl is incorrect. Fix
this by introducing the correct ranges.
The ranges are taken from the J7200 TRM [1] (Table 5-695. CTRL_MMR0
Registers).
Padconfig starting addresses and ranges:
- 0 to 66: 0x11c000, 0x10c
- 68: 0x11c110, 0x004
- 71 to 73: 0x11c11c, 0x00c
- 89 to 90: 0x11c164, 0x008
The datasheet [2] doesn't contain PADCONFIG63 (Table 6-106. Pin
Multiplexing), but the pin is necessary for enabling the MMC1 CLKLP
pad loopback and should be included in the pinmux register map.
Due to the change in pinmux node addresses, change the pinmux node for
the USB0_DRVVBUS pin to main_pmx2. The offset has not changed since the
new main_pmx2 node has the same base address and range as the original
main_pmx1 node. All other pinmuxing done within J7200 dts or dtso files
only uses main_pmx0 which has not changed.
[1] https://www.ti.com/lit/pdf/spruiu1
[2] https://www.ti.com/lit/gpn/dra821u
Fixes: 0d0a0b4413 ("arm64: dts: ti: k3-j7200: fix main pinmux range")
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20240926102533.398139-1-a-limaye@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to:
- pmic regulator for enabling AVS Support
- main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc0, mmc1, usb0, ospi0, hbmc for enabling various bootmodes.
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-12-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to:
- main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc1, usb0, usb1, ospi0 for enabling various bootmodes.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-11-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to:
- main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc0, mmc1, usb0, ospi0, ospi1, hbmc for enabling various bootmodes.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-10-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to:
- main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc1, ospi0 for enabling various bootmodes.
- eeprom for board detection
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-9-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to:
- pmic regulator for enabling AVS Support
- main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc0, mmc1, usb0, ospi0, ospi1 for enabling various bootmodes.
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-8-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adding bootph properties on leaf nodes imply that they are applicable to
the parent nodes as well. Bootloaders can derive the parent nodes when
bootph is available in the leaf nodes.
Remove the bootph-* properties from parent nodes as they are redundant.
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-7-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- hbmc_mux for enabling Hyperflash support
- ESM nodes for enabling ESM support.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-6-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- hbmc_mux for enabling Hyperflash support
- ESM nodes for enabling ESM support.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-5-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-4-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The following nodes are being used in the bootloaders. Adds bootph-*
properties to the leaf nodes to enable bootloaders to utilise them.
Following adds bootph-* to
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-3-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adding bootph properties on leaf nodes imply that they are applicable to
the parent nodes as well. Bootloaders can derive the parent nodes when
bootph is available in the leaf nodes.
Remove the bootph-* properties from parent nodes as they are redundant.
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-2-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add ti,pa-stats phandles to k3-am64x-evm.dts. This is a phandle to
PA_STATS syscon regmap and will be used to dump IET related statistics
for ICSSG Driver
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241014074527.1121613-5-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add pa-stats nodes to k3-am64-main.dtsi for all ICSSG instances.
This is needed to dump IET related statistics for ICSSG Driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241014074527.1121613-4-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add ti,pa-stats phandles to AM65x device trees. This is a phandle to
PA_STATS syscon regmap and will be used to dump IET related statistics
for ICSSG Driver
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20241014074527.1121613-3-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add pa-stats nodes to k3-am65-main.dtsi for all ICSSG instances.
This is needed to dump IET related statistics for ICSSG Driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241014074527.1121613-2-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Update the RGMII delay to 2.5ns to improve performance. We use an
additional mapper board for the am62a7 phyBOARD Lyra which makes this
delay necessary.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241004221049.1155022-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Drop the McASP AFIFOs for better audio latency. This adds back a
change that was lost while refactoring the device tree.
Fixes: 554dd562a5 ("arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Drop McASP AFIFOs")
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241002224754.2917895-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
There are 3 instances of eQEP on AM64x. Only EQEP0 signals
can be routed to the user expansion so enable only EQEP0
in k3-am642-sk.dts.
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240924220700.886313-6-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241003170118.24932-6-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241003170118.24932-5-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed.
Disable by default as this node is not complete until mailbox data
is provided in the board level DT.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241003170118.24932-4-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241003170118.24932-3-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed.
Disable by default as this node is not complete until mailbox data
is provided in the board level DT.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241003170118.24932-2-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
We now configure the a53_opp_table to include a 1.4 GHz node and set our
VDD_CORE to 0.85v in the k3-am62-phycore-som.dtsi. This change is to
match our PMIC which is now set to output 0.85v by default.
This reverts commit 7a5775a3da.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Link: https://lore.kernel.org/r/20241001071916.1362213-3-ggiordano@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
from 0.75V to 0.85V. Here we add a 1.4 GHz node to the a53_opp_table and
increase the VDD_CORE voltage accordingly.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241001071916.1362213-2-ggiordano@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This device is a subset of J784S4 and shares the same memory map and
thus the nodes are being reused from J784S4 to avoid duplication.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
( Refer Table 2-1 for Device comparison with J7AHP )
Link: https://www.ti.com/lit/pdf/spruje3 (TRM)
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-4-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Refactor J784s4-evm to a common file which uses the
superset device to allow reuse in j742s2-evm which uses the subset part.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-2-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Refactor J784s4 SoC files to a common file which uses the
superset device to allow reuse in j742s2-evm which uses the subset part.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-1-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
Add bootloader-backdoor-gpios which is required for enabling bootloader
backdoor for flashing firmware to cc1352p7.
Also fix the incorrect reset-gpio.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240903-beagleplay_fw_upgrade-v4-2-526fc62204a7@beagleboard.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The K3 J722S-EVM platform is based on the J722S SoC which has one
single-core Arm Cortex-R5F processor in each of the WAKEUP, MCU and MAIN
voltage domain, and two C71x DSP subsystems in MAIN voltage domain.
The Inter-Processor communication between the A53 cores and these R5F
and DSP remote cores is achieved through shared memory and Mailboxes.
Thus, add the memory carveouts and enable the mailbox clusters required
for communication.
Also, The remoteproc firmware like of R5F and DSPs in the MAIN voltage
domain use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash during booting of remotecores. Usage is
described as below:
+===================+=============+
| Remoteproc Node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer0 |
+-------------------+-------------+
| c7x_0 | main_timer1 |
+-------------------+-------------+
| c7x_1 | main_timer2 |
+-------------------+-------------+
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240830161742.925145-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The K3 J722S SoCs have one single-core Arm Cortex-R5F processor in each
of the WAKEUP, MCU and MAIN voltage domain, and two C71x DSP subsystems
in MAIN voltage domain. Add the DT nodes to support Inter-Processor
Communication.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
[ refactoring changes to k3-j722s-main.dtsi ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240830161742.925145-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit 73f1f26e2e ("arm64: dts: ti: k3-am68-sk-som: Add support
for OSPI flash") introduced the flash node with discontinuous
partitions. Updating the partition offset to be continuous from
the previous partition to maintain linearity.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
Link: https://lore.kernel.org/r/20240828060830.555733-1-p-mantena@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
BeagleBoard.org BeagleY-AI is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM67A,
which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose
digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA),
GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5
cores for low-power, low-latency GPIO control.
https://beagley-ai.org/https://openbeagle.org/beagley-ai/beagley-ai
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240829213929.48540-2-robertcnelson@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Each Ethernet PHY on IOT2050 platforms drives 3 LEDs whose triggers
can be configured to signal link properties such as connection status
or speed.
Declare the LEDs, exposing their trigger controls to userspace.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/r/20240829-ivo-iot2050_leds-v1-1-792a512b2178@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add Error Signaling Module (ESM) instances in MCU and MAIN domains,
set ESM interrupt sources for rti as per TRM [0] 9.4 Interrupt
Sources.
There are no ESM0_ESM_INT* events routed to MCU ESM, so it is not
possible to reset the CPU using watchdog and ESM0 configuration.
However add ESM instances for device completion.
Add comments to describe what interrupt sources are routed to ESM
modules.
[0] http://www.ti.com/lit/pdf/spruid7
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-7-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add Error Signaling Module (ESM) instances in MCU and MAIN domains,
set ESM interrupt sources for rti as per TRM [0] 10.4 Interrupt
Sources.
Add comments to describe what interrupt sources are routed to ESM
modules.
[0] https://www.ti.com/lit/pdf/spruj16
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add comments to describe what interrupt sources are routed to ESM
modules.
There is no functional change.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-5-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix interrupt sources for rti routed to the ESM0 as per [0], in 10.4
Interrupt Sources
Add comments to describe what interrupt sources are routed to ESM
modules.
[0] https://www.ti.com/lit/pdf/spruj83
Fixes: b5080c7c1f ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove 'reserved' status for MCU ESM node. Watchdog reset is
propagated through ESM0 to MCU ESM to reset the CPU, so enable MCU ESM
to reset the CPU with watchdog timeout.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix the gpio hog node name to p15-hog to match up with gpio-hog
convention. This fixes dtbs_check warning:
p15: $nodename:0: 'p15' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Acked-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240830102822.3970269-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Rename the pin mux and gpio-hog node names to match up with binding
rules. This fixes dtbs_check warnings:
'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+'
'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
While at it, change the phandle name to be consistent with the pinctrl
naming.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240830113137.3986091-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-5-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
USB on AM64 is the same peripheral as on J721E. It has a specific
compatible for potential integration details. Express this
relationship, matching what the dt-bindings indicate.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240726-s2r-cdns-v5-12-8664bfb032ac@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This adds node for E5010 JPEG Encoder which is a stateful JPEG Encoder
present in AM62A SoC [1], supporting baseline encoding of semiplanar based
YUV420 and YUV422 raw video formats to JPEG encoding, with resolutions
supported from 64x64 to 8kx8k.
E5010 JPEG Encoder IP is present in main domain, so this also adds address
range for core and mmu regions of E5010 IP in cbass_main node.
Link: https://www.ti.com/lit/pdf/spruj16 [1]
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240826162250.380005-2-devarsht@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
CAN instances 0 and 1 in the mcu domain and 0 in the main domain are
brought on the evm through headers J5, J8 and J10 respectively. Thus,
add their respective transceiver's 0, 1 and 2 dt nodes as well as
add the required pinmux to add support for these CAN instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
System firmware uses main_uart5 in J722S EVM for trace data.
Thus, describe it in device tree for completeness,
adding the pinmux and mark it as reserved.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
wkup_uart0 is a reserved node that is used by Device Manager firmware.
Only TX and RX pins are required for the firmware and enabling pinctrl
for CTS and RTS breaks the wakeup functionality of wkup_uart0. Drop the
conflicting muxes.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240826-am62p-v1-1-b713b48628d1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware of R5F in the MAIN voltage domain use timers.
Therefore, change the status of the timer nodes to "reserved" to avoid
any clash. Usage is described as below:
+===================+==========================+
| Remoteproc node | Timer Node |
+===================+==========================+
| main_r5fss0_core0 | main_timer0, main_timer2 |
+-------------------+--------------------------+
| main_r5fss0_core1 | main_timer1 |
+-------------------+--------------------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
To allow firmware to pick up all DTs from here, move the overlays that
are normally applied during DT fixup to the kernel source as well. Hook
then into the build nevertheless to ensure that regular checks are
performed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/91f8b825467651ebd51a4051f153ab136eeb1849.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PG1 A variant of the iot2050 series has been identified which
partially lacks support for lock-step mode. This implies that all
iot2050 boards can't support this mode. As a result, lock-step mode has
been disabled across all iot2050 boards for consistency and to avoid
potential issues.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d1f5f84db7a1597cd29628a0b503e578367b7b40.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI AM69 SK board has three R5F clusters in the MAIN domain, and all
of these are configured for LockStep mode at the moment. Switch all of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-8-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J784S4 EVM board has three R5F clusters in the MAIN domain, and
all of these are configured for LockStep mode at the moment. Switch
all of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-7-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI AM68 SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721S2 EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721E SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721E EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J7200 EVM board has one R5F cluster in the MAIN domain, and it is
configured for LockStep mode at the moment. Switch the MAIN R5F cluster
to Split mode by default to maximize the number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
External interfaces should be disabled at the SoC DTSI level, since
the node is incomplete. Disable Ethernet switch and ports in SoC DTSI
and enable them in the board DTS. If the board DTS includes a SoM DTSI
that completes the node description, enable the Ethernet switch and
ports in SoM DTSI.
Reflect this change in SoM DTSIs by removing ethernet port disable.
Signed-off-by: Logan Bristol <logan.bristol@utexas.edu>
Acked-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240809135753.1186-1-logan.bristol@utexas.edu
Signed-off-by: Nishanth Menon <nm@ti.com>
assigned-clock sets DEV_RTIx_RTI_CLK(id:0) whereas clocks sets
DEV_RTIx_RTI_CLK_PARENT_GLUELOGIC_HFOSC0_CLKOUT(id:1)[1]. This does not
look right, the timers in the driver assume a max frequency of 32kHz for
the heartbeat (HFOSC0 is 19.2MHz on j784s4-evm).
With this change, WDIOC_GETTIMELEFT return coherent time left
(DEFAULT_HEARTBEAT=60, reports 60s upon opening the cdev).
[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html#clocks-for-rti0-device
Fixes: caae599de8 ("arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances")
Suggested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240805174330.2132717-2-echanude@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: fae14a1cb8 ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: f46d16cf5b ("arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable throttling down the CPU frequency when an alert temperature
threshold (lower than the critical threshold) is reached.
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://lore.kernel.org/r/20240814214328.14155-1-alessandro.zini@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit ed07d82f9e ("arm64: dts: ti: k3-am62p-j722s: Move
SoC-specific node properties") introduced the main_gpio1 node
and included the ti,ngpio property, but did not include the
gpio-reserved-ranges property. As a result, the user could try
to access gpios that do not exist. Fix this by introducing the
gpio-reserved-ranges property.
The non-existent gpios are found in the am67x datasheet [1] in Table
5-27.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am67.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit 29075cc09f ("arm64: dts: ti: Introduce AM62P5 family of
SoCs") introduced the main_gpio1 node and included the ti,ngpio
property, but did not include the gpio-reserved-ranges property. As a
result, the user could try to access gpios that do not exist. Fix this
by introducing the gpio-reserved-ranges property.
The non-existent gpios are found in the am62p datasheet [1] in Table
5-24.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
mmc1 is not functional and needs clock loopback so that it can
create sampling clock from this for high speed SDIO operations.
Thus, add clklb pin mux to get mmc1 working.
Fixes: a266c180b3 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240809072231.2931206-1-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 instance of the PCIe controller on J784S4 SoC supports up to 4
lanes. Additionally, all 4 lanes of PCIe0 can be utilized on J784S4-EVM
via SERDES1. Since SERDES1 is not being used by any peripheral apart
from PCIe0, use all 4 lanes of SERDES1 for PCIe0.
Fixes: 27ce26fe52 ("arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240720110455.3043327-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There are 2 mux-controller nodes in J7200 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: da23e8d112 ("arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There are 2 mux-controller nodes in J721S2 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: 98f3b667e1 ("arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit 5e5c50964e ("arm64: dts: ti: k3-j722s: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: 5e5c50964e ("arm64: dts: ti: k3-j722s: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-4-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed introducing the range description for the mcu_gpio node. As a
result, automatic mapping of GPIO to pin control for mcu gpios is
broken. Fix this by introducing the proper ranges.
Fixes: d72d73a44c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This reverts commit 3935fbc87d.
CTRL_SLEEP_MOCI# is a signal that is defined for all the SoM
implementing the Verdin family specification, this signal is supposed to
control the power enable in the carrier board when the system is in deep
sleep mode. However this is not possible with Texas Instruments AM62
SoC, IOs output buffer is disabled in deep sleep and IOs are in
tri-state mode.
Given that we cannot properly control this pin, force it to be always
high to minimize potential issues.
Fixes: 3935fbc87d ("arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci")
Cc: <stable@vger.kernel.org>
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1361669/am625-gpio-output-state-in-deep-sleep/5244802
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240731054804.6061-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
First patch fixes warning splat seen on J784S4 due to overlapping
serdes0 lane. Second patch cleans up the serdes0 references for readability
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmaVYl4QHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW48GRCAC5u0MKtI+/BZZVlqmgtL0glWYcFBUKxAFU
iRTKIJAEsfR42R6vGFolujtfvb2RDLxgUFhpt8A5X5SiVWk3DC/txAMgIkaFsndu
FeHCgwr6jLtZ2Cg3iiD3+/NxEHQ3GKA/CJZYJwAM8ED8UWKENA0JkTwz5H47D+OF
Ijc/MyM/HNp2LbfdGN23hcK4Vw2BGZFtRJUkjWNNZcvwG6d66a/3Z/sSOlAL9rB3
a1ypEX2X71O3I7Fdp25v4ukbW8+E+pVEpXQEg8tf8fkPYuRZqUMxbWzHrPAvx6u6
RM+V7iQIxr61rwL31OWDlPnweSUv6cUQH3aADQOok16Chvt/u37N
=thvO
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.11-part2' into ti-k3-dts-next
Late fixes towards v6.11-rc1
First patch fixes warning splat seen on J784S4 due to overlapping
serdes0 lane. Second patch cleans up the serdes0 references for readability
Signed-off-by: Nishanth Menon <nm@ti.com>
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Subnodes were added to serdes0 in two different spots (due to independent
development of their consumer usage). Let's go ahead and combine those
into one reference for readability's sake.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240710-k3-j784s4-evm-serdes0-cleanup-v1-2-03850fe33922@redhat.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Currently PCIe1 is setup to use SERDES0 lanes 0 thru 3, and USB0 is
setup to use SERDES0 lane 3 as well.
This overlap in lanes causes the following reset related lane splat:
[ 4.846266] WARNING: CPU: 4 PID: 308 at drivers/reset/core.c:792 __reset_control_get_internal+0x128/0x160
...
[ 4.846405] Call trace:
[ 4.846407] __reset_control_get_internal+0x128/0x160
[ 4.846413] __of_reset_control_get+0x4e0/0x528
[ 4.846418] of_reset_control_array_get+0xa4/0x1f8
[ 4.846423] cdns_torrent_phy_probe+0xbc8/0x1068 [phy_cadence_torrent]
[ 4.846445] platform_probe+0xb4/0xe8
...
[ 4.846577] cdns-torrent-phy 5060000.serdes: phy@0: failed to get reset
Let's limit the PCIe1 SERDES0 lanes to 0 and 1 to avoid overlap here.
This works since PCIe1 operates in x2 mode and doesn't need 4 SERDES0
lanes.
Fixes: 27ce26fe52 ("arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode")
Suggested-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240710-k3-j784s4-evm-serdes0-cleanup-v1-1-03850fe33922@redhat.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reserve 576MiB of CMA as global CMA pool starting after initial 1GiB of
DDR.
AM62ax has different multimedia components such as Camera, Display, H.264
VPU and JPEG Encoder which use CMA for buffer allocations.
The 12x 720x480 realtime VPU decode use-case requires 544MiB of CMA,
additional 32MiB is kept as buffer in case some other peripheral also
require it while VPU is running.
The reason to choose latter 1GiB is to not overlap with existing memory map
which is utilizing initial 1GiB for remoteproc firmwares as shared here
[1].
Also some drivers such as JPEG require 32bit addressing so not allocating
from higher DDR address.
Link: https://lore.kernel.org/all/20240605124859.3034-5-hnagalla@ti.com [1]
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Link: https://lore.kernel.org/r/20240613150902.2173582-3-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reserve 128MiB of global CMA which is also marked as re-usable
so that OS can also use the same if peripheral drivers are not using the
same.
AM62x supports multimedia components such as GPU, dual Display and Camera.
Assuming the worst-case scenario where all 3 are run in parallel below
is the calculation :
1) OV5640 camera sensor supports 1920x1080 resolution
-> 1920 width x 1080 height x 2 bytesperpixel x 8 buffers
(default in yavta) : 32MiB
2) 1920x1200 Microtips LVDS panel supported
-> 1920 width x 1080 height x 4 bytesperpixel x 2 buffers :
16 MiB
3) 1920x1080 HDMI display supported
-> 1920 width x 1080 height x 4 bytesperpixel x 2 buffers :
15.82 MiB which is ~16 MiB
4) IMG GPU shares with display allocated buffers while rendering
but in case some dedicated operation viz color conversion,
keeping same window of ~16 MiB for GPU too.
Total is 80 MiB and adding 32 MiB for other peripherals and extra
16 MiB to keep as buffer for fragmentation thus rounding total to 128
MiB.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Link: https://lore.kernel.org/r/20240613150902.2173582-2-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Fix the following warnings when compiling dtbs with W=1:
../arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi:343.10-353.6: Warning (graph_child_address): /bus@f0000/i2c@20000000/tps6598x@3f/connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
../arch/arm64/boot/dts/ti/k3-am62-main.dtsi:633.22-643.5: Warning (graph_child_address): /bus@f0000/dwc3-usb@f900000/usb@31000000: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240626101520.1782320-3-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Fix the following warnings that are thrown when building dtbs with W=1:
../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:367.10-376.6: Warning (graph_child_address): /bus@f0000/i2c@20000000/usb-power-controller@3f/connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
../arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi:647.22-657.5: Warning (graph_child_address): /bus@f0000/usb@f900000/usb@31000000: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
also defined at ../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:517.7-528.3
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240626101520.1782320-2-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM67A/J722S/TDA4AEN platform is a derivative of AM62P platform
and we have no single 1:1 relation regarding index of GPIO and pin
controller. The GPIOs and pin controller registers have mapping and
holes in the map. These have been extracted from the J722S data
sheet. The MCU mapping is carried forward as is with J722S, however the
main GPIO block has differences that needs to be accounted for.
Mux mode input is selected as it is bi-directional. In case a specific
pull type or a specific pin level drive setting is desired, the board
device tree files will have to explicitly mux those pins for the GPIO
with the desired setting.
Ref: J722S Data sheet https://www.ti.com/lit/gpn/tda4aen-q1
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240627162539.691223-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
On the AM62P platform we have no single 1:1 relation regarding index
of GPIO and pin controller. The GPIOs and pin controller registers
have mapping and holes in the map. These have been extracted from the
AM62P data sheet.
MCU pinctrl definition is shared as it is common between AM62P and
J722S, but that is not the case for main domain.
Ref: AM62P Data sheet https://www.ti.com/lit/gpn/am62p
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240627162539.691223-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Introduce a GPIO mux mode macro for easier readability. All K3 devices
use mux mode 7 to switch to GPIO mux and this allows the gpio-ranges to
be defined for pinctrl-single clearly.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240627162539.691223-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The WKUP system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-8-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The WKUP system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-7-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The MCU system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-6-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The MCU system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-5-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The MCU system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-4-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The MCU system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-3-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The MCU system controller address region contains an eFuse block with
MAC addresses to be used by the Ethernet controller. The property
“ti,syscon-efuse” contains a phandle to a syscon region and an offset
into this region where the MAC addresses can be found. Currently
"ti,syscon-efuse" points to the entire system controller address space
node with an offset to the eFuse IP address.
Instead add a cpsw-mac-efuse node to describe the exact eFuse area. Then
point the Ethernet controller directly to this region, no offset needed.
This makes it so the system controller memory area does not need to be one
big syscon area, describe this bus address area as the simple-bus it is.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240628151518.40100-2-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The phyCORE-AM62Ax [1] is a SoM (System on Module) featuring TI's AM62Ax SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM62Ax family.
A development Kit, called phyBOARD-Lyra [2] is used as a carrier board
reference design with a mapper board being used to allow the phyCORE-AM62Ax
to fit the phyBOARD-Lyra.
Supported features:
* Debug UART
* SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* GPIO Expander
* LEDs
* USB
* HDMI
* USB-C
* Audio
For more details, see:
[1] Product page SoM: https://www.phytec.com/product/phycore-am62a
[2] Product page CB: https://www.phytec.com/product/phyboard-am62a
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240626155244.3311436-4-ggiordano@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
PHYTECs phyBOARD-Lyra carrier board is able to accomidate multiple SoMs.
Refactor k3-am625-phyboard-lyra-rdk.dts into an include file so it can
be reused in combination with our phyCORE-AM62Ax SoM.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240626155244.3311436-2-ggiordano@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The audio support on J784S4-EVM is using PCM3168A[0] codec
connected to McASP0 serializers.
- Add the nodes for sound-card, audio codec, MAIN_I2C3 and
McASP0.
- Add pinmux for I2C3, McASP0 and AUDIO_EXT_REFCLK1.
- Add necessary GPIO hogs to route the MAIN_I2C3 lines and
McASP serializer.
- Add idle-state as 1 in mux1 to route McASP clock signals.
[0]: <https://www.ti.com/lit/gpn/pcm3168a>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240626101645.36764-4-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
On J784S4 SoC, the AUDIO_REFCLK1 can be used as input to external
peripherals when configured through CTRL_MMR.
Add audio_refclk1 node which would be used as system clock for
audio codec PCM3168A.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240626101645.36764-3-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add McASP 0-4 instances and keep them disabled because several
required properties are missing as they are board specific.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240626101645.36764-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The NAND expansion card (PROC143E1) connects over the User/MCU/PRU
Expansion port on the am62-lp-sk EVM.
The following pins are shared between McASP1 and GPMC-NAND so
both cannot work simultaneously.
Pin name McASP1 function GPMC function
======== =============== =============
J17 MCASP1_AXR0 GPMC0_WEN
P21 MCASP1_AFSX GPMC0_WAIT0
K17 MCASP1_ACLKX GPMC0_BE0N_CLE
K20 MCASP1_AXR2 GPMC0_ADVN_ALE
The factory default sets the pins for McASP1 use. (i.e.
Resistor Array RA1 installed, RA4 not installed).
For NAND use, RA1 has to be removed and RA4 must be
installed.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240622-am62lp-sk-nand-v1-2-caee496eaf42@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The audio support on J722S-EVM is using TLV320AIC3106[0] codec
connected to McASP1 serializers.
- Add the nodes for sound-card, audio codec and McASP1.
- Add hog for TRC_MUX_SEL to select between McASP and TRACE signals
- Add hogs for GPIO_AUD_RSTn and MCASP1_FET_SEL which is used to
switch between HDMI audio and codec audio.
- Add pinmux for MCASP1 and AUDIO_EXT_REFCLK1.
[0]: <https://www.ti.com/lit/gpn/TLV320AIC3106>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240625113301.217369-3-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
On J722S SoC, the AUDIO_REFCLK1 can be used as input to external
peripherals when configured through CTRL_MMR.
Add audio_refclk1 node which would be used as system clock for the
audio codec TLV320AIC3106.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240625113301.217369-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
AM68 SK has an OSPI NOR flash on its SOM connected to OSPI0 instance.
Enable support for the same. Also, describe the OSPI flash partition
information through the device tree, according to the offsets in the
bootloader.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240622161835.3610348-1-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to change from the default OSPI NOR to QSPI NOR
for all am6xx-phycore-som boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an ospi nor, but if qspi nor is populated, the EEPROM will
indicate that change and we can use this overlay to cleanly change to
qspi nor.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240621233143.2077941-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
MIT license was added to the AM64x SoC DTSIs in commit 6248b20e32
("arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0"). Apply
the same license change to the TQMa64xxL SoM and MBaX4XxL baseboard
Device Trees.
The copyright year is updated to indicate the license change.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240625110244.9881-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I2C1 controller controls io-expander which provides power to voltage
regulator vdd_mmc1 for MMC SD using a gpio line.
Add bootph-all to the pinmux node for this instance, as this is used during
SPL stage too by the bootloader while using SD boot mode as without this
the SD boot mode fails with below error when using this device-tree in
u-boot:
"Timed out in wait_for_event: status=0000
Check if pads/pull-ups of bus are properly configured
Timed out in wait_for_event: status=0000
Check if pads/pull-ups of bus are properly configured
"
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240614123532.203983-1-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Certain device-tree node properties of shared device-tree nodes are
different between the AM62P and J722S SoCs. To avoid overriding the
properties and to avoid redefining the nodes in the k3-{soc}-main.dtsi
having such SoC specific properties, move the properties to the SoC
specific k3-{soc}-main.dtsi files.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-9-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable PCIe0 instance of PCIe in Root Complex mode of operation with Lane 0
of the SERDES1 instance of SERDES. Also enable USB0 instance of USB to
interface with the Type-C port via the USB hub, by configuring the pin P05
of the GPIO expander on the EVM. Enable USB1 instance of USB in SuperSpeed
mode of operation with Lane 0 of the SERDES0 instance of SERDES.
Co-developed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-8-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J722S SoC has two instances of SERDES namely SERDES0 and SERDES1 and one
instance of PCIe namely PCIe0. Both SERDES0 and SERDES1 are single lane
SERDES. The PCIe0 instance of PCIe is a Gen3 single lane PCIe controller.
Since SERDES and PCIe are not present on AM62P SoC, add the device-tree
nodes corresponding to them in the J722S SoC specific "k3-j722s-main.dtsi"
file.
Co-developed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-7-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The SERDES0 and SERDES1 instances of SERDES on J722S are single lane
SERDES which are individually muxed across different peripherals.
LANE0 of SERDES0 is muxed between USB and CPSW while LANE0 of SERDES1 is
muxed between PCIe and CPSW.
Define the lane-muxing macros to be used as the idle state values.
Co-developed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-6-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Update "k3-j722s.dtsi" to include "k3-am62p-j722s-common-{}".dtsi files in
order to reuse the nodes shared with AM62P. Also include the J722S specific
"k3-j722s-main.dtsi".
Since the J7 family of SoCs has the k3-{soc}.dtsi file organized as:
k3-{soc}.dtsi = CPU + Cache + CBASS-Ranges + "Peripheral-Includes"
switch the "k3-j722s.dtsi" file to the same convention.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-5-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Introduce the "k3-j722s-main.dtsi" file to contain main domain peripherals
that are specific to J722S SoC and are not shared with AM62P. The USB1
instance of the USB controller on J722S is different from that on AM62P.
Thus, add the USB1 node in "k3-j722s-main.dtsi".
Co-developed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-4-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The USB1 instance of USB controller on AM62P is different from the USB1
instance of USB controller on J722S. Thus, move the USB1 instance from
the shared "k3-am62p-j722s-common-main.dtsi" file to the AM62p specific
"k3-am62p-main.dtsi" file. Include "k3-am62p-main.dtsi" in "k3-am62p.dtsi".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-3-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62P and J722S SoCs share most of the peripherals. With the aim of
reusing the existing k3-am62p-{mcu,main,thermal,wakeup}.dtsi files for
J722S SoC, rename them to indicate that they are shared with the J722S SoC.
The peripherals that are not shared will be moved in the upcoming patches
to the respective k3-{soc}-{mcu,main,wakeup}.dtsi files without "common" in
the filename, emphasizing that they are not shared.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-2-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The NAND expansion card plugs in over the HSE (High Speed Expansion)
connector. Add support for it.
We add the ranges property to the GPMC node instead of the NAND
overlay file to prevent below warnings.
/fragment@3/__overlay__: Relying on default #address-cells value
/fragment@3/__overlay__: Relying on default #size-cells value
As GPMC is dedicated for NAND use on this board, it should be OK.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240614-am642-evm-nand-v5-1-acf760896239@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to disable the spi nor for all am6xx-phycore-som
boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an ospi nor, but if no nor is populated, the EEPROM will indicate
that change and we can use this overlay to cleanly disable the
spi nor.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240613230759.1984966-5-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to disable the rtc for all am6xx-phycore-som boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an rtc, but if no rtc is populated, the EEPROM will indicate that
change and we can use this overlay to cleanly disable the rtc.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240613230759.1984966-4-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to disable the eth phy for all am6xx-phycore-som
boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an ethernet phy, but if no ethernet phy is populated, the EEPROM
will indicate that change and we can use this overlay to cleanly
disable the ethernet phy.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240613230759.1984966-3-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Label the spi nor as serial_flash. This allows us to disable the
flash with an overlay common to all am6xx-phycore-som boards.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Link: https://lore.kernel.org/r/20240613230759.1984966-2-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721E common processor board can be interfaced with the infotainment
expansion board[0] to enable the following audio/video interfaces in
addition to the peripherals provided by the common processor board:
- Two Audio codecs each with three Stereo Inputs and four Stereo Outputs
- Audio input over FPD Link III
- Digital Audio Interface TX/RX
- HDMI/FPD LINK III Display out
- LI/OV Camera input
Add support for TFP410 HDMI bridge located on the Infotainment Expansion
Board (connected to J46 & J51).
Add a HDMI connector node and connect the endpoints as below:
DSS => TFP410 bridge => HDMI connector
Also add the pinmux data and board muxes for DPI.
Rest of the peripherals are not added as of now.
[0]: <https://www.ti.com/lit/ug/spruit0a/spruit0a.pdf>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[j-choudhary@ti.com: minor cleanup]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240613093706.480700-1-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to enable PCIe on the am642-phyboard-electra. The
serdes is muxed from USB to PCIe, so we are restricted to USB2 while
using this overlay.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240613195012.1925920-3-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Remove pinmuxing for PCIe so that we can add it in an overlay.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240613195012.1925920-2-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add the interrupts needed for PTP Hardware Clock support via IEP
in SR1.0 devices.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
