This commit is a part of #5853 works.
This commit add new topotest to verify SRv6-manager's functionality.
Following tests are performed on this topotest.
- check that SRv6-locator is set correctly
- check that default SRv6-function locator is set correctly
- check that SRv6-function is installed as ipv6 route correctly
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit checks seg6local route configuration via ZAPI is
working fine.
SRv6 feature is little young feature as kernel feature so netlink
interface may be changed/updated in the future. And this ZAPI extention
is something to support new routing paradigm, so it should be checked by
topotests until srv6 feature of linux kernel will be well stable.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
There are two possible use-cases for the `vrf_bind` function:
- bind socket to an interface in a vrf
- bind socket to a vrf device
For the former case, there's one problem - success is returned when the
interface is not found. In that case, the socket is left unbound without
throwing an error.
For the latter case, there are multiple possible problems:
- If the name is not set, then the socket is left unbound (zebra, vrrp).
- If the name is "default" and there's an interface with that name in the
default VRF, then the socket is bound to that interface.
- In most daemons, if the router is configured before the VRF is actually
created, we're trying to open and bind the socket right after the
daemon receives a VRF registration from zebra. We may not receive the
VRF-interface registration from zebra yet at that point. Therefore,
`if_lookup_by_name` fails, and the socket is left unbound.
This commit fixes all the issues and updates the function description.
Suggested-by: Pat Ruddy <pat@voltanet.io>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add ability to filter session on show bgp summary by neighbor or
remote AS:
ubuntu# show bgp summary ?
neighbor Show only the specified neighbor session
remote-as Show only the specified remote AS session
ubuntu# show bgp summary neighbor ?
A.B.C.D Neighbor to display information about
WORD Neighbor on BGP configured interface
X:X::X:X Neighbor to display information about
ubuntu# show bgp summary remote-as ?
(1-4294967295) AS number
external External (eBGP) AS sessions
internal Internal (iBGP) AS sessions
This patch includes the documentation and the topotest.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Test case test_verify_mroute_when_5_different_receiver_joining_same_sources_p0
is failing intermittently in master. Fixed the issue.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Automated test cases to verify BGP Graceful Shutdown community functionality,
with 2 different topologies.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
We only need an instance when we have at least one area configured in a
VRF. Currently we have the following issues:
- instance for the default VRF is always created
- instance is not removed after the last area config is removed
This commit fixes both issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When the redistribution is configured in non-default VRF, isisd should
redistribute routes from this VRF instead of default.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Change every `-` to `_` in directory names. This is to avoid mixing _ and -.
Just for consistency and directory sorting properly.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
There is a rare case where with prefix peers the peer is
completely absent from the json output when checking the
peer state resulting in a python key error. Check key exists
before checking the state.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
parse_topology function doesn't correctly process vertex types with
spaces. Therefore the reference topology files are completely messed up,
we have values in incorrect fields - types in metrics, metrics in
parents, etc.
This commit fixes the parsing function and the reference files.
The same fix was done for isis-topo1-vrf in #8365.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Not having scapy in the docker image leads to very obtuse failures in
the pim bsm tests (obtuse, as in, it just fails without any hint as to
why...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The previous method, using zassert.h and hoping nothing includes
assert.h (which, on glibc at least, just does "#undef assert" and puts
its own definition in...) was fragile - and actually broke undetected.
Just provide our own assert.h and control overriding by putting it in a
separate directory to add to the include path (or not.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Individual tests must not depend on each other. In particular, a test
can't be sure that the previous test config is applied or cleared.
It is definitely not true when a single test is executed, for example:
`test_bgp_auth.py::test_prefix_peer_remove_passwords`.
This commit makes all tests independent of each other. It also adds a
call to check_all_peers_established at the start of "remove_passwords"
tests to make sure that we not only block new peers with an incorrect
password, but also clean the existing peers.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
YANG model and CLI commands allow user to configure LDP-sync per area.
But the actual implementation is incorrect - all commands are changing
the config for the whole VRF instead of a single area. This commit fixes
this issue by actually implementing per area configuration.
Fixes#8578.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we don't allow to configure the interface before the area is
configured. This approach has the following issues:
1. The area config can be deleted even when we have an interface config
relying on it. The code is not ready for that - we'll have a whole
bunch of stale pointers if user does that.
2. The code doesn't correctly process the event of changing the VRF for
an interface. There is no mechanism to ensure that the area exists
in the new VRF so currently the circuit still stays in the old VRF.
This commit allows an arbitrary order of area/interface configuration.
There is no more need to configure the area before configuring the
interface.
This change fixes both the issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
DR information is missing under "show ip ospf interface [json]".
Added DR infomation to display in "show ip ospf interface".
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
The current log prints maximum wait time which is not actually correct,
because it doesn't include the command execution time. We usually have
"failed after X seconds" log with X being far longer than this maximum.
Let's print the maximum number of tries instead.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This test is completely incorrect on test_bfd_loss_intermediate step.
It shuts down the interface and then "waiting" for the BGP session to
fail. But instead of the actual wait it compares the output of "show bfd
peers" with the "up" state. As it does this comparison right after the
interface shutdown, the BFD session has not yet failed and the comparison
is always successful except very rare cases when the command takes a lot
of time to execute (due to the heavy load on CI system I suppose).
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This function kills all processes that happen to have the same
name to frr processes and it was only ever used in the setup.
Setup should not be used to kill old runs. That should be a
separate process.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This test establishes a binding between nbma ip of a spoke and its
protocol address. This information is pushed to hub.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Just another round of trying to add pytest.mark.bgpd. Not finished yet just
what I could stand doing for a few minutes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
