RFC 8665 defines a Segment Routing Local Block for Adjacency SID.
This patch provides the possibility to modify the SRLB as well as
reserved the block range from the Label Manager.
- Introduce new CLI 'segment-routing local-block'
- Add local block to SRDB structure
- Parse / Serialize SRLB in Router Information LSA
- Update OSPF-SR topotest
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Give the FRR users some examples of gRPC usage in scripts to let them
start experimenting with the new configuration interface provided by
YANG/northbound.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It's time to say good bye to libyang 0.16.105. The recently
released libyang 1.0.184 includes numerous bug fixes and performance
improvements that we need.
Despite the major version bump from 0.x to 1.x, the libyang API is
the same except for a single backward-incompatible change in the
user types interface (which we're currently not using). Hence no
code changes were necessary to adapt FRR to libyang 1.x.
This commit also reintroduces some leafrefs that needed to be
removed from our YANG modules due to a bug that was present on
libyang 0.16.105.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add note blocks to the topotest and topotest-json dev docs to
emphasize the need for generous BGP retry/convergence timers.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Last patch sent in on the mailing list was in July 2018. If someone
sends a patch we can still pick it up, but practiced reality is quite
clearly PRs on github.
Signed-off-by: David Lamparter <equinox@diac24.net>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Fix the table that shows the mapping between ip network cli
tokens and the data struct that the cli handler will see.
Optional network/subnet types appear as a pointer to an
all-zeroes struct, not a NULL pointer.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a couple breadcrumbs to get people up and running
with lua when they are trying to develop for it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
Update the workflow.rst file to outline new requirement for
features to include automated testing of some sort.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some doc to let developers know about the `-s` flag
with `git commit`.
We were seeing some people writing the sign-off manually.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
As per weekly meeting this is an attempt to document about
how we as a community will work together on development
branches.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the `--enable-address-sanitizer` option instead of the manual
version using environment flags.
This also avoids the problem of having to remember to skip clippy with
the custom flags:
```
make -C lib CFLAGS="-g -O2" LDFLAGS="-g" clippy
```
The snippet above is not needed with `--enable-address-sanitizer`!
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The asm-code was interpreted inconsistently for different platforms.
In particular for AArch64 this caused UB, if multiple static MTYPEs
where defined in one file. All static MTYPE_* could point to the same
memory location (namely the first defined MTYPE) OR to their respective
(correct) locations depending on the context of their usage.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
All FRR Linux packages are built using libcap-dev (or libcap-devel)
installed in the system. Update the build instructions to suggest
FRR developers to do the same. The main motivation for this is that
the seteuid() system call is too expensive and overall less secure
compared to using the Linux capabilities framework.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
pytest intends to deprecate users not having python 2 on the system.
in order to make topotest work, just use an older pytest version.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
After ~4 months of deprecation period [1], drop support for older
libyang versions that don't support embedded extensions.
In addition to support for embedded extensions, libyang 0.16-r3
contains several bug fixes and performance improvements compared
to libyang-0.16-r1. It was about time to update.
Fixes:
* Issue #3273
* Issue #3971
[1] See commit 68626e08.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "static struct mtype * const MTYPE_FOO" doesn't quite make a
"constant" that is usable for initializers. An 1-element array works
better.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a note in the fedora build guide on how to disable
firewalld and clear iptables that come by default.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
People have been complaining our major version number increases to
fast and/or in a meaningless way...
Signed-off-by: David Lamparter <equinox@diac24.net>
The lists documentation had not been updated to represent
the for_eachXXX to frr_eachXXX changes. Make it so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an 8-ary heap (cacheline optimized.) It works as a semi-sorted
kind of middle ground between unsorted and sorted datastructures; pop()
always returns the lowest item but ordering is only loosely enforced.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turns out we need one of these. Same API as DECLARE_LIST, but deleting
random items is much faster.
Signed-off-by: David Lamparter <equinox@diac24.net>
The mpls-route module may be missing from Ubuntu 18.4. Provide info on
what pkg to install plus what directory py.test needs to be run from.
Signed-off-by: nikos <ntriantafillis@gmail.com>
Noticed during attempts at usage that the documentation
needed a couple small updates:
1) Tell the user which header to include
2) Some functions want the address of the data structure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Noticed during attempts at usage that the documentation
needed a couple small updates:
1) Tell the user which header to include
2) Some functions want the address of the data structure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ralph has kindly granted us GPLv2+ license to use this documentation,
and requests that we keep a reference to his name. Add these facts to
the documentation.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Reflow to 80 columns
* Improve markup
* Add --apiserver option to example ospfd invocations
* Add note on requirement of this option to use api server
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
libyang defaults CMAKE_BUILD_TYPE to "Debug", which disables compiler
optimizations. We should instruct our users to build libyang in the
"Release" mode so that compiler optimizations are enabled and they
can benefit from the associated performance improvements.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove the following:
* gawk
* dejagnu
Add the following for FreeBSD 9 and OpenBSD 6:
* libexecinfo
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Update build package list
* Update ./configure options
* Fix some RST syntax errors
* Use monolithic config examples
* Use compile include snippet
* Reorganize a bit
Tested on Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Use compile include snippet
* Move daemons enable section to end
* Fix a couple syntax errors
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We're going to use this same snippet across every build doc so let's
just pull it into its own include file now.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Tested these on Fedora 24 and 28, so they should be true for all
versions in-between as well as Fedora 29 and all upcoming versions.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Upstream libyang now works with FRR; use it
* Install libyang to system library directories to satisfy pkg-config
* Remove warnings about ABI version
* Remove outdated binary package links
* Cleanup formatting
Validated that these instructions work on:
- Fedora 24
- Fedora 28.
- Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
it is possible to do some ponctual backporting of bug fixes, on older
than the 2 last maintenance releases.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add build-essential and, for platforms with systemd, libsystemd-dev to
the package list for builds
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
The modules.rst documents how to create a module, let's update
it a bit to reflect what an end user needs to do a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately the first version of the FreeBSD libyang port contained
a bug in which the libyang pkginfo file wasn't being installed
correctly in the system, and this prevented the FRR build system from
detecting the library. This bug was already fixed months ago but some
FreeBSD package repositories still have the old bugged version of the
port. This means we can't suggest people to install libyang using
"pkg install" since this causes problems for most people. In this
case, suggest FreeBSD users to build and install libyang manually
as we suggest for other BSD platforms.
This commit should be reverted once all FreeBSD package repositories
are updated with the new version of the libyang port.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
explain why GPLv3 must be permitted, and explicitly mention that code
not compatible with GPLv3 is prohibited.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Add full version history with header diagrams
* Update field descriptions
* Update overview section
* Update list of protocol commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The --with-yangmodelsdir and --with-libyang-pluginsdir build-time options
pertain to FRR so they shouldn't be placed along with the libyang build
instructions. Move these instructions to where they belong to avoid
confusion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These instructions are intended to be temporary until we have libyang
packages available for all supported platforms.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The script simplifies the relatively lengthy procedure.
It should be invoked from the top level source directory, for example:
./tools/build-debian-package.sh
Signed-off-by: Daniil Baturin <daniil@baturin.org>
In some places we were using `frrvt` instead of `frrvty`. Make it consistent
with every other place and use frrvty.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sphinx actually does work with a parallel build, if the doctree creation
is a separate step (which the other builds will then just read
unmodified.) This can be done with the "dummy" target.
This also adds "-j6" to sphinx-build and adds a "--disable-doc-html"
switch on ./configure to turn on/off building HTML docs separately.
Also, HTML docs are now installed by "make install" to
/usr/share/doc/frr/html.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This roughly outlines when to use which logging function. It's
certainly something to have to point people to, so they get things nice
and right - and so we get at least somewhat consistent behaviour for the
user.
Signed-off-by: David Lamparter <equinox@diac24.net>
* Sphinx numbered lists use 1. not 1)
* Indents are three spaces
* Blocks under lists should be indented along with the rest of the list
content
* Sphinx converts :: to : when used as a code block marker
* Apply some preformatted markup to things that should be preformatted
* Remove trailing whitespace
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrap lines to 80 characters
* Update some portions to reflect current practices
* Clean up some formatting (indent, markup, etc)
* Reorganize sections on patch submission
* Remove link to nonexistent github wiki page
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Apparently Automake has some undocumented logic somewhere that makes it
so any Makefile generated from an Automake Makefile.am is removed from
its secret list of things to delete that it deletes when performing a
recursive distclean before actually performing the recursive distclean
and since the secret list is automatically generated from the list of
things that Autoconf should generate in configure.ac we can't remove the
Makefile from that list or it will break Automake's list of things to
automatically generate that it generates from Autoconf's list of things
to automatically generate.
Thus, to prevent Automake from deleting Makefiles and then immediately
trying to use the Makefiles it just deleted to delete said Makefiles, we
must remove ourselves from the secret list, which is accomplished by
changing the file extension to '.am' instead of '.in'.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The required packages list should be easier to parse. Updated the style so it's more similar to the ``./configure`` style later in the document.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
Names of the MPLS kernel modules changed slightly in recent kernel. Uses underscore instead of dash.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
Updated the doc to cross-reference build documentation as well and
reformatted to RST. Removed stub section on how to configure daemons and
whatnot, as that's the domain of the user docs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Documentation was not fully using Automake / Autoconf and therefore needs
modifications to support black magic VPATH builds.
* Convert Makefile's to Autoconf-controlled Makefile.in's
* Tweak loading of pygments lexer to handle runtime paths
* Update .gitignore's as necessary
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The docs extract various configuration values from config.status and
substitute them into placeholders throughout the docs. Add the ability
to build the docs with some reasonable defaults set instead of failing
when config.status doesn't exist.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Pygments 2.2+ has `load_lexer_from_file`, but it looks like some of our
build platforms are on an older version.
Also gotta include the new file in dist tarball.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Currently, we just package the frr daemons, but we don't run
them. This is fine for basic tests, but it is inconvenient to
orchestrate the daemons from downstream test environments.
Here, we follow the redhat and debianpkg formats more closely,
putting the daemons in /usr/lib/frr and including the frr user
and groups in the package. We also include a docker specific
startup script and a sysvinit link in /etc/init.d/frr for
openrc based alpine installs.
Testing done:
Built packages, built base images, everything seems to work fine.
Uninstalled the package, all the daemons stopped.
Issue: https://github.com/FRRouting/frr/issues/2030
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Vincent Bernat has written a small Pygments lexer for IOS / Quagga
config files that works just as well on FRR stuff. Pulled that into our
docs with his blessing.
Also changed the background color on our code blocks away from that
kinda ugly green to gray, which looks way better with the syntax
highlighting changes that are about to happen in the next commit.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use the proper section markup as defined in workflow.rst.
This helps Sphinx organize sections properly.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Currently, we tar up the git repo before building alpine packages.
This ensures that the packages we're building are exactly what is
checked in. But, in practice, this restriction causes us to not
be able to build off of git contexts, which is a convenient feature
especially when using docker-compose.
So, here, we build the alpine packages directly from the contents
of the current directory and we install the packages into a base
image to ease downstream consumption. There is still work to be
done in that area, as we need to package up the daemons, frr user
and all the rest, but that's for later...
Testing-done:
Built directly from the git repo, built from a reference to the
git repo and built using docker-compose, all seemed to work. Also,
tested by @leleobhz and seems to build fine.
Thanks to Leonardo Amaral (@leleobhz) for reporting the issue and for
the original idea for a fix.
Issue: https://github.com/FRRouting/frr/issues/2024
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
* Document modes & nodes
* Document walkup behavior
* Document struct cmd_node
* Add graph of node relationships
* Reorder sections to make more logical sense
* Rewrap sections to 80 lines
* Fix code block indent
* Specify language for code blocks in order to get syntax highlighting
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Ubuntu 18.04 build doc was not included in its toctree
* Duplicate definition of the same CLI command removed
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Checkpatch.pl now checks for nonstandard integral types
* Add shell script to replace all nonstandard types with their standard
counterparts in C source files
* Document usage of types, mention conversion script
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
add note that author's shouldn't remove a comment or review.
also add a note that automatically generated comments can
be deleted by authors and others when such comments are not
the most results from that automated comment source.
Signed-off-by: Lou Berger <lberger@labn.net>
The default theme has a css rule that limits the body element width to
800px, which results in sizeable chunk of empty space to the right of
the docs. Add a small css override to remove this limit (like the Python
docs do).
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Translate plaintext stub documenting bgpd preprocessor constants for
attributes into a RST file and include it in the doctree
* Remove the Markdown version of the OSPF-API document, as I've already
translated it into RST
* Remove the Markdown version of the modules document, as I've already
translated it into RST
* Rename the various "Building_FRR_*" documents to match standard RST
file conventions
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
LaTeX doesn't know how to typeset SVG images, so use a png. Sphinx has a
plugin to automatically convert images to the right format for every
builder but it depends on imagemagick and God only knows what plugin
support is like on Centos 6...
Also correct the name of the BGP typecodes doc in its index file.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Translate plaintext stub documenting bgpd preprocessor constants for
attributes into a RST file and include it in the doctree
* Remove the Markdown version of the OSPF-API document, as I've already
translated it into RST
* Remove the Markdown version of the modules document, as I've already
translated it into RST
* Rename the various "Building_FRR_*" documents to match standard RST
file conventions
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Building alpine packages in a "standard" distro can be
complicated due to the limited scope of the distro (embedded
and small docker images). Building in a VM is one possibility,
but docker support for alpine is very good (default docker images
come in alpine due to the very small size).
Here, we want to package up the current git repo into apk packages
that can be easily installed in alpine linux using the apk tool.
This support is not intended to package released versions of
apk packages, that, if it comes to be, should be done here:
git://git.alpinelinux.org/aports
We're content here to build packages that can be used by developers
to try out frr in docker and other alpine environments.
This is a very minimal environment, we don't support importing
keys (so, installing the packages with apk requires the
--allow-untrusted option). In addition, we can't use the
git commit id in hex as version tag, as alpine doesn't support hex
digits in the version string. So, we need to convert the git hash
to decimal before tagging the package with the extra version.
This is yucky, but I can't think of another way to get a
unique version per package. The alpine way (using a numeric date),
only works for released packages, not for dev packages.
Issue: https://github.com/FRRouting/frr/issues/1859
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Iron out all of the glitches with recursive Automake, 3rd-party
autogenerated Sphinx makefiles, building and installing 3 different
document formats under different targets, and handling clean.
* Implement all Automake-required targets for 3rd-party Makefiles
* Setup subdirectories for 3rd-party Makefiles
* Override implicit Automake document targets
* Clean up explicit targets for developer docs
* Move Sphinx-generated Makefile to an include file
* Update targets for debian packaging
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Unconditional automake subdirectory flag = 'man' causes manpages to
always be built regardless of target, which is undesirable for `clean`.
Remove unconditional flag and override automake targets that need to
build manpages instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- Added warning for CentOS 6 support to be limited
- Added instructions for installing sphinx27-build manually
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Error message for missing sphinx-build wasn't clear enough when
explaining how to change the path to the sphinx-build binary as it said
'environment variable' instead of 'make variable'
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* New manpage: mtracebis.rst
* Makefile.am includes mtracebis.rst
* configure.ac lines removed
* Debian packaging files updated
* Fixed up manpage |seealso-programs| in the process
* Centos7 build package list updated to include systemd-devel
* New paragraph on netns vrf support in zebra manpage
Conflicts:
configure.ac
debianpkg/backports/ubuntu14.04/debian/frr.install
debianpkg/frr.install
doc/Makefile.am
doc/developer/Building_FRR_on_CentOS7.rst
doc/zebra.8.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
BSD systems need gmake to build FRR, hence why we use $(MAKE) instead of
directly invoking make. It looks like Sphinx generated makefiles
understand this, but contain a bug where the target for info files
hardcodes make instead of using $(MAKE). Fix this.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some platforms (actually just Centos6, again, of course) call
"sphinx-build" as "sphinx-1.0-build", and so to work around this
apparently useless name, fall back to sphinx-1.0-build when we can't
find sphinx-build before displaying an error message. I am not doing in
this the configure script because the sphinx makefiles are not Automake
files and the less Automake in tree the better.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
