The debuild command fails when we are doing source package only build
because it expects the arch-dependent .changes file to be present. Thus
in the instructions we switch to using dpkg-buildpackage directly and
add a note about using debuild in more complicated scenarios.
Signed-off-by: Ondřej Surý <ondrej@sury.org>
In the CI, it's better to build the source package only once and then
instead of checking out the whole repository, only distribute the source
packages to the individual jobs.
Signed-off-by: Ondřej Surý <ondrej@sury.org>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Also
- update info about new packages needed as libcares.
- create proper links to libyang so ld can find the lib.
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Update workflow.rst to state that commit messages consisting solely of
program output, or that otherwise fail to adequately summarize the
changes being made, are unacceptable.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Analogous to Linux kernel `%pV` (but our mechanism expects 2 specifier
chars and `%pVA` is clearer anyway.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Add new status for Vertex, Edge and Subnet to manage their
respective states in the data base.
Add new functions:
- to register/unregister server and client
- to show content of the Database (VTY and Json output)
- to update and compare subnets
- to clean vertex and ted from ORPHAN elements
- to convert message or stream into a Link State Element and update
Link State Database accordingly to message event
Change Edge and Vertex key computation by using the host order systematically.
This impact mostly key based on IPv4 addresses where `ntohl()` function must
be used when searching a Vertex or Edge by key.
Update the documentation accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add some extra notes to the dev doc section about writing new
topotests: check for OS/kernel support if necessary; avoid
volatile or unstable data like ifindices or link-locals.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Signed-off-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
Script by the current link doesn't work with Python 2 anymore:
```
ERROR: This script does not work on Python 2.7 The minimum supported Python version is 3.6.
Please use https://bootstrap.pypa.io/2.7/get-pip.py instead.
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- Don't document 'no' commands
- Don't use .. index:: for clicmds
- Don't document all possible variants
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Wrote a little guide for cross-compiling FRR, gleaned from notes I took
while compiling for a RPi 3B+ on a Gentoo x86_64 system.
Care was taken to keep this documentation as generic as possible so
these steps could be applied to any cross-compile targeting a supported
architecture.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
gcc fucks up global variables with section attributes when they're used
in templated C++ code. The template instantiation "magic" kinda breaks
down (it's implemented through COMDAT in the linker, which clashes with
the section attribute.)
The workaround provides full runtime functionality, but the xref
extraction tool (xrelfo.py) won't work on C++ code compiled by GCC.
FWIW, clang gets this right.
Signed-off-by: David Lamparter <equinox@diac24.net>
1. We are using iperf to send IGMP join and traffic for multicast suites. Iperf must be
used to run all multicast suite
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
1. Scapy, is a python tool, which would be used in multicast-pim-bsm-topo1
suite automation. We have some BSM raw packets captured and saved in
JSON file, these packets would be sent using scapy on tests demands.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Define new models for Link State Database a.k.a TED
and functions to manipulate the new database as well as exchange Link State
information through ZAPI Opaque message.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This new dynamic module makes pathd behave as a PCC for dynamic candidate path
using the external library pcpelib https://github.com/volta-networks/pceplib .
The candidate paths defined as dynamic will trigger computation requests to the
configured PCE, and the PCE response will be used to update the policy.
It supports multiple PCE. The one with smaller precedence will be elected
as the master PCE, and only if the connection repeatedly fails, the PCC will
switch to another PCE.
Example of configuration:
segment-routing
traffic-eng
pcep
pce-config CONF
source-address ip 10.10.10.10
sr-draft07
!
pce PCE1
config CONF
address ip 1.1.1.1
!
pce PCE2
config CONF
address ip 2.2.2.2
!
pcc
peer PCE1 precedence 10
peer PCE2 precedence 20
!
!
!
!
Co-authored-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
With the change of Solaris going from Supported -> UnSupported
the documentation needed to be updated to reflect the reality
on the ground.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC 8665 defines a Segment Routing Local Block for Adjacency SID.
This patch provides the possibility to modify the SRLB as well as
reserved the block range from the Label Manager.
- Introduce new CLI 'segment-routing local-block'
- Add local block to SRDB structure
- Parse / Serialize SRLB in Router Information LSA
- Update OSPF-SR topotest
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Give the FRR users some examples of gRPC usage in scripts to let them
start experimenting with the new configuration interface provided by
YANG/northbound.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It's time to say good bye to libyang 0.16.105. The recently
released libyang 1.0.184 includes numerous bug fixes and performance
improvements that we need.
Despite the major version bump from 0.x to 1.x, the libyang API is
the same except for a single backward-incompatible change in the
user types interface (which we're currently not using). Hence no
code changes were necessary to adapt FRR to libyang 1.x.
This commit also reintroduces some leafrefs that needed to be
removed from our YANG modules due to a bug that was present on
libyang 0.16.105.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add note blocks to the topotest and topotest-json dev docs to
emphasize the need for generous BGP retry/convergence timers.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Last patch sent in on the mailing list was in July 2018. If someone
sends a patch we can still pick it up, but practiced reality is quite
clearly PRs on github.
Signed-off-by: David Lamparter <equinox@diac24.net>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Fix the table that shows the mapping between ip network cli
tokens and the data struct that the cli handler will see.
Optional network/subnet types appear as a pointer to an
all-zeroes struct, not a NULL pointer.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a couple breadcrumbs to get people up and running
with lua when they are trying to develop for it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
Update the workflow.rst file to outline new requirement for
features to include automated testing of some sort.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some doc to let developers know about the `-s` flag
with `git commit`.
We were seeing some people writing the sign-off manually.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
As per weekly meeting this is an attempt to document about
how we as a community will work together on development
branches.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the `--enable-address-sanitizer` option instead of the manual
version using environment flags.
This also avoids the problem of having to remember to skip clippy with
the custom flags:
```
make -C lib CFLAGS="-g -O2" LDFLAGS="-g" clippy
```
The snippet above is not needed with `--enable-address-sanitizer`!
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The asm-code was interpreted inconsistently for different platforms.
In particular for AArch64 this caused UB, if multiple static MTYPEs
where defined in one file. All static MTYPE_* could point to the same
memory location (namely the first defined MTYPE) OR to their respective
(correct) locations depending on the context of their usage.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
All FRR Linux packages are built using libcap-dev (or libcap-devel)
installed in the system. Update the build instructions to suggest
FRR developers to do the same. The main motivation for this is that
the seteuid() system call is too expensive and overall less secure
compared to using the Linux capabilities framework.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
pytest intends to deprecate users not having python 2 on the system.
in order to make topotest work, just use an older pytest version.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
After ~4 months of deprecation period [1], drop support for older
libyang versions that don't support embedded extensions.
In addition to support for embedded extensions, libyang 0.16-r3
contains several bug fixes and performance improvements compared
to libyang-0.16-r1. It was about time to update.
Fixes:
* Issue #3273
* Issue #3971
[1] See commit 68626e08.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "static struct mtype * const MTYPE_FOO" doesn't quite make a
"constant" that is usable for initializers. An 1-element array works
better.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a note in the fedora build guide on how to disable
firewalld and clear iptables that come by default.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
People have been complaining our major version number increases to
fast and/or in a meaningless way...
Signed-off-by: David Lamparter <equinox@diac24.net>
