Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When entering a interface name and you fat-finger it
actually display some useful information about the vrf
we are in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the "call" CLI is executed from with-in a route-map that is already in use,
there is a need to get the route-map clients to re-evalute the clauses defined
by both the parent route-map, as well as the child route-map.
The existing callbacks, add_hook() and delete_hook() can be used by the lib to
inform the clients when the "call" is configured and unconfigured.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Redundant parentheses surrounding declarator removed.
Can be detected via static analysis with e.g.
./configure CFLAGS=-Wredundant-parens CC=clang
Signed-off-by: F. Aragon <paco@voltanet.io>
OS-level yield is generally a bad and possibly dangerous idea. If the
thread should be suspended, there should always be something to wait on,
or it turns into busy waiting. And if it's "just giving something else
the chance to run" - that's the kernel's job to determine, and the
kernel will do so while considering priorities, cgroups, and whatnot.
Let it do its job.
Signed-off-by: David Lamparter <equinox@diac24.net>
All I can see is an unneccessary complication. If there's some purpose
here it needs to be documented...
Signed-off-by: David Lamparter <equinox@diac24.net>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
Allow at timer wheel creation time the ability to specify a
name for what we want the 'show thread cpu' to show up as.
Modify pim to note this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify a run name for display in
'show thread cpu' that is different than the function
name we are calling.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FreeBSD supports pthread_set_name_np() too. Also, pthread_set_name_np()
returns void. And NetBSD has pthread_setname_np() with an extra arg...
Signed-off-by: David Lamparter <equinox@diac24.net>
Need this to get CMSG_SPACE/CMSG_LEN on Solaris.
Also, AC_GNU_SOURCE is deprecated, AC_USE_SYSTEM_EXTENSIONS does that.
Signed-off-by: David Lamparter <equinox@diac24.net>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
ASAN/MSAN/TSAN flags need to be in CFLAGS and LDFLAGS; the latter links
the correct compiler-dependent library. Also, the configure switch was
broken (--disable-... would enable the sanitizer.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Clang was thinking the random level could be negative. (And, no, I
couldn't figure that out by reading its output... trial and error this
was.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a TAILQ_POP_FIRST so Clang understands it's the same item that is
getting removed from the list.
Signed-off-by: David Lamparter <equinox@diac24.net>
Auto-detect if pthread_condattr_setclock is available and if
it is not allow the code to compile around the issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vty_prefix_list_install function was modifying the prefix to match the
specified prefix length and warning in the log file. Modify
code to use zlog_info as that a warn implies that something has
gone terribly wrong. Additionally display to the terminal as
well so that user can get immediate feedback from something
that they can correct.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Solution :
The following procedures would be performed :
1. Verify if the pid file for each daemon is present or not. If the file is not present, that means the
daemon is getting instantiated for the first time. So let it go ahead.
If the file is present proceed to point ‘2’.
2. Try fetching the properties of the pid file.
3. If it has RW lock, that means one instance of this the daemon is already running.
So stop moving ahead and do exit() else let it go ahead. Please note all above procedure happen at
the initial state of daemon’s instantiation, much before it starts any session with other
process/allocates resources etc.. and this verification do not have any impact of any
operations done later, if the verification succeeds.
Signed-off-by: bisdhdh sadhub@vmware.com
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The ZEBRA_IPV4_ROUTE_IPV6_NEXTHOP_ADD zapi message has no creators and
no handlers. Let's just remove.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move the aggregate pointer from the route_node into agg_node
so that people using struct route_node will see a savings
in data size.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a abstraction for `struct route_node` and `struct route_table`
such that we can have an aggregate route_node and table. This
is because only bgp/rfapi and ripng use the aggregate data pointer
in `struct route_node`. For full route tables other routing
protocols and tables are paying a 8 byte overhead per node.
A full bgp table ends up being ~1.2 million routes in bgp
and zebra. This is not an insiginificant amount of data.
So create the data structures for this replacement, but
do not replace the aggregate pointer yet. This is because
later commits will convert rfapi and ripng over to this
new data, and finally we'll move the aggregate pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix CLANG warning:
Report for if.c | 2 issues
===============================================
< WARNING: else is not generally useful after a break or return
< #390: FILE: /tmp/f1-28557/if.c:390:
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This crash occurs only with netns implementation.
vrf meaning is different regarging its implementation (netns or
vrf-lite)
- With vrf-lite implementation vrf is a property of the interface that
can be changed as the speed or the state (iproute2 command: "ip link
set dev IF_NAME master VRF_NAME"). All interfaces of the system are in
the same netns and so interface name is unique.
- With netns implementation vrf is a characteristic of the interface
that CANNOT be changed: it is the id of the netns where the interface
is located. To change the vrf of an interface (iproute2 command to
move an interface "ip netns exec VRF_NAME1 ip link set dev IF_NAME
netns VRF_NAME2") the interface is deleted from the old vrf and
created in the new vrf.
Interface name is not unique, the same name can be present in the
different netns (typically the lo interface) and search of interface
must be done by the tuple (interface name, netns id).
Current tests on the vrf implementation (vrf-lite or netns) are not
sufficient. In some cases (for example when an interface is moved from
a vrf X to the default vrf and then move back to VRF X) we can have a
corruption message and then a crash of zebra.
To avoid this corruption test on the vrf implementation, needed when an
interface changes, has been rewritten:
- For all interface changes except deletion the if_get_by_name function,
that checks if an interface exists and creates or updates it if
needed, is changed:
* The vrf-lite implementation is unchanged: search of the interface
is based only on the name and update the vrf-id if needed.
* The netns implementation search of the interface is based on the
(name, vrf-id) tuple and interface is created if not found, the
vrf-id is never updated.
- deletion of an interface (reception of a RTM_DELLINK netlink message):
* The vrf-lite implementation is unchanged: the interface
information are cleared and the interface is moved to the default
vrf if it does not belong to (to allow vrf deletion)
* The netns implementation is changed: only the interface
information are cleared and the interface stays in its vrf to
avoid conflict with interface with the same name in the default
vrf.
This implementation reverts (partially or totally):
commit 393ec5424e ("zebra: fix missing node attribute set in ifp")
commit e9e9b1150f ("lib: create interface even if name is the same")
commit 9373219c67 ("zebra: improve logs when replacing interface to an
other netns")
Fixes: b53686c52a ("zebra: delete interface that disappeared")
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To correct potential crash with netns implementation of vrf (see next
commit) it is necessary to allow any daemons to know the vrf
implementation whatever the vrf.
With current implementation the daemons do not know the vrf
implementation for the default vrf. For this vrf the returned vrf
implementation is always vrf-lite.
To solve this issue a netns name is set to the default vrf to just test
is presence to know the used implementation.
For zebra a netns name (if needed) is set in the vrf_init function just
before enabling the vrf. So this information is propagated to the other
daemons thanks the zapi message called when the vrf is enable at zebra
layer and override the default configuration (vrf-lite) of the daemon.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Sphinx actually does work with a parallel build, if the doctree creation
is a separate step (which the other builds will then just read
unmodified.) This can be done with the "dummy" target.
This also adds "-j6" to sphinx-build and adds a "--disable-doc-html"
switch on ./configure to turn on/off building HTML docs separately.
Also, HTML docs are now installed by "make install" to
/usr/share/doc/frr/html.
Signed-off-by: David Lamparter <equinox@diac24.net>
stdatomic.h does not have aliases for all of the useful gcc
atomic primitives; add them in for that path through
frratomic.h.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We have the fetch_and_xxx apis, which return the _old_ value;
adding the xxx_and_fetch versions, which return the new value.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If default VRF is used, with standard naming convention,
memory allocation can be avoided.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Prevent from creating vrf, if the default vrf name is the same as the
vrf to be created.
Also, prevent at startup from creating default vrf with a name already
used in vrf list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For the daemons that do not use vrf_init(), the call to the define
will return a default vrf if no other values has been overriden.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The get API is used each time the VRF_DEFAULT_NAME macro is used.
The set API is not yet used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Linux 2.6.0 was released in December of 2003... I'm pretty sure we don't
need this Linux 2.4 support anymore.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Memory sizes of the vrf bit-map was insane for a system
with a moderate number of data on it:
Zebra:
VRF bit-map : 601 65536 39391944
Having a full 32bit integer bit space is problematically large,
switch over to a hash to store bit data. We do not need to waste
so much space.
VRF bit-map : 13 8 312
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The master->unused list was unbounded during normal operation.
A full BGP feed on my machine left 11k threads on the unused
list, taking up over 2mb of data. This seemed a bit excessive,
reduce to a limit of 10.
Also fix a crash that this exposed where we assumed that a thread
structure was not deleted.
Future committers can make this configurable? or modify
the value to something better for their system. I am
dubious of the value of this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This debug should be moved to an error situation since it's a
developmental escape that needs to be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are using a enum to drive a switch statement and we have
a default case statement that can never be entered because
we know all the enum states have been covered. Remove it
from the code as that it cannot happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zlog_warn was being used to inform user of impossible situations
or for normal operations. Remove these from the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The smux.c code has not been able to compile for 2+ years
and no-one has noticed. Additionally net-snmp has marked
smux integration as deprecated for quite some time as well.
Since no-one has noticed and it's been broken and smux integration
is deprecated let's just remove this from the code base.
From looking at the code, it sure looks like SNMP could use
a decent cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were storing Poll data for the read and write
memory information in MTYPE_THREAD, so a show run
would not be able to show actual amount of memory
associated with the `struct thread`.
Remove unnecessary NULL checks on malloc.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify stream.c to have stream_new call one malloc call
instead of two. Also change stream_resize_orig to
use stream_resize_inplace and to send an error
to the developer to switch over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start setup for handling of stream_resize into old
and new functions.
Create a stream_resize_inplace function that takes
a double pointer to allow for a realloc operation
to return the possibly moved pointer.
Add a CONFDATE for removal as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make the wart slightly less bad... also there is still a possible write
after free here. This needs to be fixed again, properly, by some
structure changes.
Signed-off-by: David Lamparter <equinox@diac24.net>
show error all was displaying 0 value for code, whereas real code value
was not displayed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The hash_get function when called and the alloc_func returns
a NULL value, we do not create a backet nor do we insert
anything into the hash. As such backet->data must always
be non-NULL.
Modify the description in hash_get to inform of this.
Additionally indicate that hash_walk and hash_iterate
cannot have a NULL backet->data value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The CMSG_FIRSTHDR was broken on solaris pre version 9. Version 9
was released in May of 2002 and EOL'ed in 2014. Version 8 EOL'ed
in 2012. Remove special case code for a little used platform
that has not seen the light of day in a very long time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Used as:
frr_elevate_privs(&my_privs) {
... code ...
}
and handles privilege raise/lower automatically in conjunction with the
C expression block. This makes it impossible to accidentally exit a
function with privileges raised (and then running a whole bunch of other
code with privs.)
Signed-off-by: David Lamparter <equinox@diac24.net>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The clippy code does not need to log the error messages
as errors as that it is only run as part of the build
itself and as long as we see the notifications we are good.
So convert zlog_err to zlog_notice so that we do not think
we have any zlog_err's in lib anymore
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes a error state is detected when we have added
new code to FRR, but not updated all the places that
we should have. Consider this a developmental escape
that needs to be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a new error code LIB_ERR_SYSTEM_CALL to the ferr subsystem.
Additionally convert LIB_ERR_VRF_SOCKET to a more generic
LIB_ERR_SOCKET.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are logging a commands via the `log commands`
cli, use zlog_notice instead of zlog_err, since that
this is not an actual error situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Add code to auto-create the ferr infrastructure as well as add
some initial error handling for vrf.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Simplify addition of new messages to the system by allow passage of
arrays of data, instead of one at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Add zlog_* function to log with a reference code
* Add ability to track reference cards for errors to ferr.[ch]
* Assign some reference code ranges
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Only zebra and pimd call vrf_cmd_init(), so these are the only daemons
that should receive VRF commands from vtysh;
* "netns NAME" and "no netns NAME" are available only in zebra, write
custom DEFSHs in vtysh to make it aware of that;
* Remove the "no vrf NAME" definition from vtysh.c and expose the
original command to vtysh by converting the DEFUN_NOSH to a simple
DEFUN. This command doesn't change the vty node so there's no need to
special case it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When `bfdd` is enabled - which it is by default - re-route the PTM-BFD
messages to the FRR's internal BFD daemon instead of the external
PTM daemon.
This will help the migration of BFD implementations and avoid
duplicating code.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If malloc_usable_size() or malloc_size() are available, we can count
total usage of a particular MTYPE. (Without the functions, we don't
know how much to subtract on free.)
Signed-off-by: David Lamparter <equinox@diac24.net>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Modify stream_new in this way:
1) ALLOC allocations do not fail, they cause a crash so remove
if tests for it.
2) Modify usage of XCALLOC to XMALLOC and then hand set all the
relevant data in the stream pointer.
With this modification stream allocation of 10000000 streams at
10k bytes each reduced from on average 1.43 seconds to 0.65 seconds.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we issue this command, we are getting:
robot# show ip route vrf green json
{}
% VRF green not found
robot# show ip route vrf green
% VRF green not found
% VRF green not found
robot#
Fix the command so it only displays one line of output
for json or non-json output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix ripd crash of null pointer.
when authenticate a rip packet,
the key pointer or the key string pointer may be null,
the code have to return then.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
The `type` parameter was not being compared with `cmsg_type`, so the
result of this function was always a pointer to the first header
matching the level.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When we read in a backup file, we should save the original
host.config so that we can put it back to the correct original
location after we read in the backup config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
Modify the unlock code for a route_node to return NULL on
pointer freed or to return the node itself again.
We'll need to go through the code and fix this pattern,
but this is a problem for another day. Get this fix in
place and we can make it a low hanging problem to fix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some parameter names to functions in table.h to give a
clue as to what we expect people to pass in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On old compilers CPP_NOTICE should be a macro evaluating to an empty
statement, instead of being undefined.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This function should be called with a known vrf_id. All other cases, the
other API should be called.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Sometimes, the file under /var/run/netns may not be authorised to be
read ( because it is not read permission for frr user, for instance).
so it is good to know what happened.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some values for icmp type/code can not be encoded like port source or
port destination. This is the case of 0 value that is authorized for
icmp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The flowspec fragment attribute is taken into account to be pushed in
BGP policy routing entries. Valid values are enumerate list of 1, 2, 4,
or 8 values. no combined value is supported yet.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The packet length can be injected from fs entry with an enumerate list;
the negation of the value is also taken into account.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those flags can be shared between BGP and Zebra. That is why
those flags are moved to common pbr.h header file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When in a dev build add a bit of code to track max
depth of a fifo and to allow zebra to report on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Previous correction (2c2d5cb397) was not enough,
so now it is ensured that the argument shift is not negative nor zero.
Signed-off-by: F. Aragon <paco@voltanet.io>
If your daemon does not need any special privileges
and you are compiling with HAVE_CAPABILIES, the
zprivs->change pointer will end up NULL due
to the way zprivs_caps_init. So as a check
let's add a NULL check for zprivs->change
and set it to a function that will do nothing.
This change prevents a crash if you raise privileges
when your daemon needs no special privileges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_clear_updated is only used by routemap.c,
don't expose it too be used by the outside world.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to specify the designated log level at startup.
--log-level <emergencies|alerts|critical|errors|warnings|notifications|informational|debugging>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the special case code to use syslog for Cumulus.
They can specify this via startup now instead of having
a special compile flag for this option.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are starting a daemon, allow the user to specify:
--log <stdout|syslog|file:file_name>
This can be used on early startup to put the log files
where the end user wants them to show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The read in of cli was happening prior to thread
event handling for non-integrated configs. This
is interesting for 2 reasons:
1) Read-in of integrated configs was after thread
event loop startup, so we had a difference of behavior
2) Read-in can cause a series of events that cause
us to attempt to communicate with zebra. The zebra
zapi connection only happens after the thread event
loop has been started. This can cause data that
is being written down to zebra to be lost and
no real way to notice that this has happened and
to recover gracefully.
Modify the code to create a thread event for read
in of client config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we fail to read in the config file and we have
specified a backup of the backup, attempt to
read that information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When reading the config file add an ability to know
if we have properly read in anything. So that a daemon
can make fallback plans.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are iterating through the hash, keep count of how many
we've called and if we have finished calling the hash->size
iterator times, then short-circuit and stop looping over
the entire array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately user CFLAGS causes #define conflicts with #defines in
Python development headers, which causes build failures under certain
platforms when using -Werror.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
