Track whether or not we have received an answer from
our query to do nexthop tracking. This allows us to
go straight to doing a synchronous query for our
RPF.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the separation of tracking a Destination from the act
of looking it up. The cojoining of these two concepts led
to a bunch of code that had to think about both problems leading
to weird situations and code paths. Simplify the code by making
pim_ecmp_nexthop_search a static function and we only ever
call pim_ecmp_nexthop_lookup when we need to do a RPF().
pim_ecmp_nexthop_lookup will now attempt to find a stored pnc
and if it finds one it will report on the answer from it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When creating new RP information from a `ip pim rp A.B.C.D/M A.B.C.D`
we should determine if we are the RP even if we can or cannot
determine if we have a path to the RP via RPF.
This is because we should determine if we are the RP based upon a
connected ip address match not whether or not we have a path to
the RPF. We would normally think this is not important but
RPF is inherently asynchronous and we can have a state where
we have registered for nht but have not received the actual
path back yet from zebra.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When staticd receives notification that a vrf that it is using
is back up into a state that can be used, go through and
mark all the si data structures nexthops as not installed.
This will allow us to complete the loop and reinstall routes
that need to be fully resolved.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move &rpki_cmd from VIEW to ENABLE. A non-enabled session could
enter into the rpki command node and exit into glocalb config mode
without having to enable.
Move &show_rpki* from ENABLE to VIEW. Allow non-enabled user to
view cache state and prefix table state.
Signed-off-by: David Teach <dteach@routeviews.org>
Avoid tracking 0.0.0.0/32 nexthop with RIB.
When routes are aggregated,
the originate of the route becomes self.
Do not track nexthop self (0.0.0.0) with rib.
Ticket: CM-24248
Testing Done:
Before fix-
tor-11# show ip nht vrf all
VRF blue:
0.0.0.0
unresolved
Client list: bgp(fd 16)
VRF default:
VRF green:
VRF magenta:
0.0.0.0
unresolved
Client list: bgp(fd 16)
After fix-
tor-11# show ip nht vrf all
VRF blue:
VRF default:
VRF green:
VRF magenta:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When you add a static route like:
ip route 10.0.0.0/24 Null0
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
all routes after this command will be ignored by staticd and are not inserted in RIB.
This is the cause of return instead of continue in the for loop in static_nht_update_safi() function that is stopping the search in the routes list and is returning in the previous function without calling static_zebra_route_add() function.
This patch is fixing this issue.
Signed-off-by: Adrian Ban <bugs@abtelcom.ro>
Adjust the nexthop comparison api so that it calls the label-
comparison api. Adjust the label-comp api so that "no labels"
is "equal".
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The current reverse logic led to this code construct
if (!pim_nexthop_lookup(...)) {
//Do something successfull
}
This is backwards and will cause logic errors when people
use this code. Fix to use true/false for success/failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a new pim neighbor comes up, we need to go through and
mark nexthops that we have received from zebra for reachability
tracking so we can refigure stuff. If we pass in the new neighbor
we can limit the search to those nexthops out the interface that
the new neighbor has come up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_resolve_upstream_nh function call is no longer being used
let's remove it from the code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: (*,G) mroute uptime is not updated in mroute table,
after deleting and adding the RP
Root cause: When RP gets deleted or becomes not reachable, then
we un-install the entry from the kernel, but still maintains the
entry in the stack. When RP gets re-configured or becomes reachable,
"show ip mroute" shows the uptime, when the channel_oil gets created.
Fix: Introduce a new time mroute_creation in the channel_oil, gets
updated when mroute gets installed in the kernel.
Signed-off-by: Sarita Patra <saritap@vmware.com>
In order to iterate over MPLS VPN routes, it's necessary to use
two nested loops (the outer loop iterates over the MPLS VPN RDs,
and the inner loop iterates over the VPN routes from that RD).
The bgp_table_stats_walker() function wasn't giving this special
treatment to the MPLS VPN safi as it should, which was leading to
crashes and malfunctioning. Fix this.
Signed-off-by: Renato Westphal <renatowestphal@gmail.com>
pinum (renamed from rinum) was never used for anything useful since
the initial revision ~17 years ago. Get rid of it.
Signed-off-by: Renato Westphal <renatowestphal@gmail.com>
Remove the following:
* gawk
* dejagnu
Add the following for FreeBSD 9 and OpenBSD 6:
* libexecinfo
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
