watchfrr_enable is ignored, watchfrr_options is unneeded and the
valgrind options have been replaced with daemon_wrap/all_wrap.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add build-essential and, for platforms with systemd, libsystemd-dev to
the package list for builds
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When you are using the install/remove routes command, the
output goes to a log file. This command allows for ease
of dump of timing information from the vty or vtysh.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
The modules.rst documents how to create a module, let's update
it a bit to reflect what an end user needs to do a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately the first version of the FreeBSD libyang port contained
a bug in which the libyang pkginfo file wasn't being installed
correctly in the system, and this prevented the FRR build system from
detecting the library. This bug was already fixed months ago but some
FreeBSD package repositories still have the old bugged version of the
port. This means we can't suggest people to install libyang using
"pkg install" since this causes problems for most people. In this
case, suggest FreeBSD users to build and install libyang manually
as we suggest for other BSD platforms.
This commit should be reverted once all FreeBSD package repositories
are updated with the new version of the libyang port.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This doc is .. include::'d in snmp.rst and needs to be ignored as part
of the main toctree build. This patch squashes a Sphinx build warning.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
explain why GPLv3 must be permitted, and explicitly mention that code
not compatible with GPLv3 is prohibited.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Add full version history with header diagrams
* Update field descriptions
* Update overview section
* Update list of protocol commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Router Information needs to specify the area ID when flooding scope is set to
AREA. However, this authorize only one AREA. Thus, Area Border Router (ABR) are
unable to flood Router Information Opaque LSA in all areas they are belongs to.
The path implies that the area ID is no more necessary for the command
'router-info area'. It remains suported for compatibility, but mark as
deprecated. Documentation has been updated accordingly.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The --with-yangmodelsdir and --with-libyang-pluginsdir build-time options
pertain to FRR so they shouldn't be placed along with the libyang build
instructions. Move these instructions to where they belong to avoid
confusion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These instructions are intended to be temporary until we have libyang
packages available for all supported platforms.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with Sysrepo,
a YANG-based configuration and operational state data store.
The plugin is linked to the libsysrepo library and communicates with
the sysrepod daemon using GPB (Google Protocol Buffers) over AF_UNIX
sockets. The integration consists mostly of glue code that calls the
appropriate FRR northbound callbacks in response to events triggered
by the sysrepod daemon (e.g. request to change the configuration or to
fetch operational data).
To build the sysrepo plugin, provide the --enable-sysrepo option to the
configure script while building FRR (the libsysrepo library needs to be
installed in the system).
When installed, the sysrepo plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: bgpd -M sysrepo.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with the ConfD
management agent.
The plugin is linked to the libconfd library and communicates with the
confd daemon using local TCP sockets. The integration consists mostly
of glue code that calls the appropriate FRR northbound callbacks in
response to events triggered by the confd daemon (e.g. request to change
the configuration or to fetch operational data).
By integrating FRR with the libconfd library, FRR can be managed using
all northbound interfaces provided by ConfD, including NETCONF, RESTCONF
and their Web API.
The ConfD CDB API is used to handle configuration changes and the ConfD
Data Provider API is used to provide operational data, process RPCs and
send notifications. Support for configuration management using the ConfD
Data Provider API is not available at this point.
The ConfD optional 'get_object()' and 'get_next_object()' callbacks were
implemented for optimal performance when fetching operational data.
This plugins requires ConfD 6.5 or later since it uses the new leaf-list
API introduced in ConfD 6.5.
To install the plugin, the --enable-confd option should be given to the
configure script, specifying the location where ConfD is installed.
Example: ./configure --enable-confd=/root/confd-6.6
When installed, the confd plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: zebra -M confd.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We weren't cleaning up some files (a whole lot of python foobar) and had
some files in the dist tarball that don't quite belong there.
Signed-off-by: David Lamparter <equinox@diac24.net>
For some reason, automake was "randomizing" the order of these few lines
in the generated output Makefile.in.
I have absolutely no clue what's going on, but it's the only thing
preventing me from building reproducible source tarballs (i.e.
bit-exactly identical), so... just slightly "rephrase" this.
Should behave exactly the same as before.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some draft ietf are not handle by :rfc: keyword. A workaround is
proposed, like it has been done for flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This corrects the route map documentation to add the missing "prefix-list"
keyword, which is necessary when matching against a prefix list (as opposed to
an access list).
Additionally, change hyphens for underscores in the variables the user is
supposed to substitute in those commands, to prevent any confusion with the
"prefix-list" keyword itself, and also to make it more consistent with the
other documented commands (which are already using underscores).
Signed-off-by: Tore Anderson <tore@redpill-linpro.com>
Documentation on how to use multiple autonomous systems was inaccurate
and a bit scattered. Clarify usage of VRFs with multiple autonomous
systems, how to configure them, and their distinction from views. Also
moves a block on L3VPN VRFs out of the 'Basic Concepts' section.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The script simplifies the relatively lengthy procedure.
It should be invoked from the top level source directory, for example:
./tools/build-debian-package.sh
Signed-off-by: Daniil Baturin <daniil@baturin.org>
Sphinx always runs, even in the `make install` stage. When `make install`
is run as root and then another `make` is run by a nonprivileged user,
some versions of `mv` prompt like this:
mv: replace 'doc/manpages/_build/man/man.stamp',
overriding mode 0644 (rw-r--r--)?
Add -f to `mv` to avoid this. As `-f` is part of Posix, this should be
portable enough.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
In some places we were using `frrvt` instead of `frrvty`. Make it consistent
with every other place and use frrvty.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The sphinx 'text' writer apparently doesn't support these, and the
'dummy' writer is only available on recent versions, and all of this
makes the build a bit annoying...
Signed-off-by: David Lamparter <equinox@diac24.net>
Sphinx actually does work with a parallel build, if the doctree creation
is a separate step (which the other builds will then just read
unmodified.) This can be done with the "dummy" target.
This also adds "-j6" to sphinx-build and adds a "--disable-doc-html"
switch on ./configure to turn on/off building HTML docs separately.
Also, HTML docs are now installed by "make install" to
/usr/share/doc/frr/html.
Signed-off-by: David Lamparter <equinox@diac24.net>
It is possible to dynamically change default VRF name, if vrf backend is
a netns backend. By creating a link to the default netns in
/var/run/netns folder, then the file name will be used to name the
default VRF. If no backend netns is chosen, it is explained that it is
still possible to statically configure the default vrf name to new
define.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Coded as part of #2684 and most code written while participating at
BornHack@2018.
bgp.rst: Explain what the communities does and a summarized edition of
the communities purpose.
Signed-off-by: Christoffer <netravnen@gmail.com>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The smux.c code has not been able to compile for 2+ years
and no-one has noticed. Additionally net-snmp has marked
smux integration as deprecated for quite some time as well.
Since no-one has noticed and it's been broken and smux integration
is deprecated let's just remove this from the code base.
From looking at the code, it sure looks like SNMP could use
a decent cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This roughly outlines when to use which logging function. It's
certainly something to have to point people to, so they get things nice
and right - and so we get at least somewhat consistent behaviour for the
user.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we removed --enable-tcp-zebra cleanup the last
remaining vestiges of that code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Improvements:
* Show command line as code, to avoid confusion about single dash (`-`)
and double dash;
* Tell the user where the BGP BFD commands can be found;
* Document OSPF/OSPF6/PIM BFD commands;
* Document JSON commands;
* Tell about session counters;
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Options must be documented before they can be cross-referenced, and the
scope for configure options is not present in rpki.rst. Remove the
option role tag from the `-M` option to remove the build warning.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Remove the ip route specific sections from zebra documenation and
create a specific one for the new staticd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The parameter was missing in that vty command. Then it is being added.
Also some documentation is refreshed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It has not been properly documented yet how to enable the RPKI module with BGP when having installed FRR with RPKI support. This PR seeks to add a section to the user documentation about this. So users will not have to resolve to searching the internet and looking through the FROG mailing list threads for answers.
* Sphinx numbered lists use 1. not 1)
* Indents are three spaces
* Blocks under lists should be indented along with the rest of the list
content
* Sphinx converts :: to : when used as a code block marker
* Apply some preformatted markup to things that should be preformatted
* Remove trailing whitespace
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit gathers some basic information on how to configure and setup
Ldp, as well as depict some main principles for that protocol.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add some information to inform the user that one can either display ipv4
or ipv6 routing table, with the above commands.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Currently, make check runs the unit tests and reports pass/fail,
but we have no way to guage how much of the code is covered by
these tests. gcov provides those statistics on a per source
file basis, but requires special CFLAGS and LDFLAGS. Here, we
add the --enable-gcov configure option to setup those options
correctly. We also add a make target called check-coverage,
which runs the unit tests, runs gcov and uploads the data to
the codecov.io cloud service for display.
Finally, we include a Dockerfile-coverage which creates a
container image in alpine linux to run the tests. To create
the image:
$ docker build \
--build-arg commit=`git rev-parse HEAD` \
--build-arg token=<upload token from codecov.io> \
-t frr-gcov:latest \
-f docker/alpine/Dockerfile-coverage .
and to create and upload the report:
$ docker run -it --rm frr-gcov:latest
Testing done:
Created and uploaded a report from my fork using alpine linux 3.7.
Non-coverage alpine 3.7 build still works.
Issue: https://github.com/FRRouting/frr/issues/2442
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
* Fix broken citations
* Remove trailing whitespace
* Rewrap to 80 lines
* Tweak capitalization of section headers
* Clean up a few indented blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrap lines to 80 characters
* Update some portions to reflect current practices
* Clean up some formatting (indent, markup, etc)
* Reorganize sections on patch submission
* Remove link to nonexistent github wiki page
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Older versions of Sphinx don't support toctree captions, so we can't use
them yet unfortunately.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Update the list of protocol daemons from 5 to the current 13
* Rewrap and clean up formatting for lots of miscellaneous code blocks
* Improve English in various spots
* Update architecture description and diagram
* Remove duplicate information on reporting bugs
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This doc needed (and still needs) a lot of love.
* Reorganize doc into logical sections
* Clean up lots of grammatical mistakes and misspellings
* Clean up lots of bad formatting
* Remove non-existent configuration options and commands
* Mark deprecated configuration options as deprecated
* Fix all cross-references to follow a standard format
* Fix capitalization on section and subsection titles
* Fix section and subsection level underlines
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
PIM documantation was missing commands relevant to PIM protocol
that were documented in COMMANDS file of pimd directory.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
Note that these commands:
bgp config-type cisco
no bgp multiple-instance
are now deprecated and will be removed in a future version of FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Keeping the config intact might be misunderstood. I say that even if VRF
netns is automatically discovered, it is possible for administrator to
save the netns information in the config file, to bring more clarity (
hence the config commands available).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To avoid some confusions, it is precised in the documentation that
the configuration not done from zebra will not be injected in the
configuration context. As consequence, the config file will not be
impacted by underlying network context. But also, this will not be
possible for *Zebra* to attempt to modify outside networking objects.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit brings some information about BGP VRF case with peering
using multiple VRF instances.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Apparently Automake has some undocumented logic somewhere that makes it
so any Makefile generated from an Automake Makefile.am is removed from
its secret list of things to delete that it deletes when performing a
recursive distclean before actually performing the recursive distclean
and since the secret list is automatically generated from the list of
things that Autoconf should generate in configure.ac we can't remove the
Makefile from that list or it will break Automake's list of things to
automatically generate that it generates from Autoconf's list of things
to automatically generate.
Thus, to prevent Automake from deleting Makefiles and then immediately
trying to use the Makefiles it just deleted to delete said Makefiles, we
must remove ourselves from the secret list, which is accomplished by
changing the file extension to '.am' instead of '.in'.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the documentation for match source-instance.
I also noticed that 'match source-protocol' was missing
add that in too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Kernel 2.2 was released in 1999, I'm pretty sure everybody has it by
now. Plus these links don't even exist anymore.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
While we have docs on various pieces of the build system we don't have
any docs on how to actually get FRR running once it's installed, nor do
we have comprehensive documentation on the basic procedure for building
from source. This patch remedies both of those.
Also updated the services list in the docs and removed the SERVICES file
from the project root.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The required packages list should be easier to parse. Updated the style so it's more similar to the ``./configure`` style later in the document.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
Names of the MPLS kernel modules changed slightly in recent kernel. Uses underscore instead of dash.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
The pull request #1545 from @donaldsharp introduced the command 'no
password' to remove an existing terminal connection password.
Additionally, warnings have been added to both 'no password' and 'no
enable password' to make the user aware of any security implications.
It seems that this specific pull request was never merged against master
and got lost. This commit is a cherry-pick of d4961273cb with fixed
conflicts and updated documentation.
Thanks to @donaldsharp and @pogojotz for the original PR.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Updated the doc to cross-reference build documentation as well and
reformatted to RST. Removed stub section on how to configure daemons and
whatnot, as that's the domain of the user docs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
As there are subtle differences between VRF-lite and VRF-netns,
some information is given to the operator on what can be/ can not be
done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Explain the --enable-ecmp=X configure option as well as
modify the zebra user doc to explain the -e X option.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Documentation was not fully using Automake / Autoconf and therefore needs
modifications to support black magic VPATH builds.
* Convert Makefile's to Autoconf-controlled Makefile.in's
* Tweak loading of pygments lexer to handle runtime paths
* Update .gitignore's as necessary
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Adding to mtracebis querying with group address. Same change
to vtysh mtrace command. Support for querying (S,G) and (*,G)
state in mtrace router code. Further improvments to mtrace router
code with closer complience to IETF draft. More references in
comments to the draft. Man page has been updated accordingly.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
* Run sphinxcontrib-spelling over docs
* Correct spelling errors
* Compile a dictionary for future spellchecking efforts
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The docs extract various configuration values from config.status and
substitute them into placeholders throughout the docs. Add the ability
to build the docs with some reasonable defaults set instead of failing
when config.status doesn't exist.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Pygments 2.2+ has `load_lexer_from_file`, but it looks like some of our
build platforms are on an older version.
Also gotta include the new file in dist tarball.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Currently, we just package the frr daemons, but we don't run
them. This is fine for basic tests, but it is inconvenient to
orchestrate the daemons from downstream test environments.
Here, we follow the redhat and debianpkg formats more closely,
putting the daemons in /usr/lib/frr and including the frr user
and groups in the package. We also include a docker specific
startup script and a sysvinit link in /etc/init.d/frr for
openrc based alpine installs.
Testing done:
Built packages, built base images, everything seems to work fine.
Uninstalled the package, all the daemons stopped.
Issue: https://github.com/FRRouting/frr/issues/2030
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Vincent Bernat has written a small Pygments lexer for IOS / Quagga
config files that works just as well on FRR stuff. Pulled that into our
docs with his blessing.
Also changed the background color on our code blocks away from that
kinda ugly green to gray, which looks way better with the syntax
highlighting changes that are about to happen in the next commit.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use the proper section markup as defined in workflow.rst.
This helps Sphinx organize sections properly.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Short and long form options can be written on the same line, Sphinx
understands how to cross-reference using either one of them. Also
replace some - with _ where appropriate.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Currently, we tar up the git repo before building alpine packages.
This ensures that the packages we're building are exactly what is
checked in. But, in practice, this restriction causes us to not
be able to build off of git contexts, which is a convenient feature
especially when using docker-compose.
So, here, we build the alpine packages directly from the contents
of the current directory and we install the packages into a base
image to ease downstream consumption. There is still work to be
done in that area, as we need to package up the daemons, frr user
and all the rest, but that's for later...
Testing-done:
Built directly from the git repo, built from a reference to the
git repo and built using docker-compose, all seemed to work. Also,
tested by @leleobhz and seems to build fine.
Thanks to Leonardo Amaral (@leleobhz) for reporting the issue and for
the original idea for a fix.
Issue: https://github.com/FRRouting/frr/issues/2024
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
* Document modes & nodes
* Document walkup behavior
* Document struct cmd_node
* Add graph of node relationships
* Reorder sections to make more logical sense
* Rewrap sections to 80 lines
* Fix code block indent
* Specify language for code blocks in order to get syntax highlighting
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Adds support for V4 GoAway flag as described in
https://www.ietf.org/id/draft-bz-v4goawayflag-00.txt
This option allows advertising neighbors to indicate to recipients that
they should disable IPv4 on the link.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Ubuntu 18.04 build doc was not included in its toctree
* Duplicate definition of the same CLI command removed
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the documentation for 'remote-as [internal|external]`
Cleanup some old obsolete information
Specify that interfaces can be used as a peer in bgp
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Checkpatch.pl now checks for nonstandard integral types
* Add shell script to replace all nonstandard types with their standard
counterparts in C source files
* Document usage of types, mention conversion script
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
add note that author's shouldn't remove a comment or review.
also add a note that automatically generated comments can
be deleted by authors and others when such comments are not
the most results from that automated comment source.
Signed-off-by: Lou Berger <lberger@labn.net>
The default theme has a css rule that limits the body element width to
800px, which results in sizeable chunk of empty space to the right of
the docs. Add a small css override to remove this limit (like the Python
docs do).
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Translate plaintext stub documenting bgpd preprocessor constants for
attributes into a RST file and include it in the doctree
* Remove the Markdown version of the OSPF-API document, as I've already
translated it into RST
* Remove the Markdown version of the modules document, as I've already
translated it into RST
* Rename the various "Building_FRR_*" documents to match standard RST
file conventions
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
LaTeX doesn't know how to typeset SVG images, so use a png. Sphinx has a
plugin to automatically convert images to the right format for every
builder but it depends on imagemagick and God only knows what plugin
support is like on Centos 6...
Also correct the name of the BGP typecodes doc in its index file.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Translate plaintext stub documenting bgpd preprocessor constants for
attributes into a RST file and include it in the doctree
* Remove the Markdown version of the OSPF-API document, as I've already
translated it into RST
* Remove the Markdown version of the modules document, as I've already
translated it into RST
* Rename the various "Building_FRR_*" documents to match standard RST
file conventions
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
