doc: cleanup rpki.rst

Previous commit on this file introduced formatting issues.

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is contained in:
Quentin Young 2018-07-18 19:22:14 +00:00
parent bf03267495
commit 1e18601b07

View File

@ -60,7 +60,8 @@ Enabling RPKI
This command enables the RPKI configuration mode. Most commands that start
with *rpki* can only be used in this mode.
When it is used in a telnet session, leaving of this mode cause rpki to be initialized.
When it is used in a telnet session, leaving of this mode cause rpki to be
initialized.
Executing this command alone does not activate prefix validation. You need
to configure at least one reachable cache server. See section
@ -70,29 +71,30 @@ Enabling RPKI
.. index:: daemons.conf
When first installing FRR with RPKI support from the pre-packaged binaries. Remember
to append '-M rpki' in the /etc/frr/daemons.conf file to the bgpd_options.
bgpd_options=" --daemon -A 127.0.0.1 -M rpki"
instead of the default setting
bgpd_options=" --daemon -A 127.0.0.1"
When first installing FRR with RPKI support from the pre-packaged binaries.
Remember to append :option:`-M rpki` in the :file:`/etc/frr/daemons.conf`
file to ``bgpd_options``, like so::
Else you will encounter an error when trying to enter RPKI configuration mode. Because
the rpki module is not loaded when the BGP daemon is initialized.
bgpd_options=" --daemon -A 127.0.0.1 -M rpki"
Examples of the error:
instead of the default setting::
router(config)# debug rpki
% [BGP] Unknown command: debug rpki
router(config)# rpki
% [BGP] Unknown command: rpki
Note that the rpki commands will be available in vtysh when running 'find rpki'.
Even if the RPKI module is NOT loaded.
The RPKI commands will be unavailable if you try running the same command in the
cli specific to the BGP daemon.
bgpd_options=" --daemon -A 127.0.0.1"
Otherwise you will encounter an error when trying to enter RPKI
configuration mode due to the ``rpki`` module not being loaded when the BGP
daemon is initialized.
Examples of the error::
router(config)# debug rpki
% [BGP] Unknown command: debug rpki
router(config)# rpki
% [BGP] Unknown command: rpki
Note that the RPKI commands will be available in vtysh when running ``find
rpki`` regardless of whether the module is loaded.
Configuring RPKI/RTR Cache Servers
----------------------------------