Allow to modify/cancel timers/watches without having to retrieve
the code interface.
This will make sure that you are not using the wrong interface.
Simplify code to deal with timers/watches.
Remove the requirement to have the core interface available
for removing timers/watches.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Put more event loop code in event-loop.c.
This is a preparation patch for the next one.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
The buffer could change inside smartcard_read_buf_prepare.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Using coverage utility exercise more code paths:
- message from channel with wrong type;
- remove message from channel with already removed reader;
- init message from channel (ignored);
- data from devices, ADPU;
- error from device;
- messages split in different ways;
- invalid reader_id values.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Create Smardcard device.
Connect to it and test some messages are parsed and processed
as expected.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Allows to reuse code for emulating a character device.
It will be used for Smardcard test.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This patch handles the scenario when a single read to guest device
brings multiple requests to be handled. When this happens, we will
iterate till all requests are handled and no more requests can be read
from guest device.
If the remaining buffer contains a full request we don't need to read
other bytes (note that there could be no bytes left), just parse the
request.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Use memmove instead of memcpy as the buffer can overlap if the second
request if bigger than the first.
"buf_pos" points to the point of the buffer after we read, if we want
the first part of the next request is "buf_pos - remaining".
Same consideration setting "buf_pos" for the next iteration.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Avoid client to trigger crash. The value of smartcard_readers_get
is checked for NULL so returning it it's not an issue.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
More coherent. Also it's not good for a library to output on
standard output.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
red_channel_client_handle_message is called after parsing the
message so it's not necessary to check it again or parse manually.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
As base messages require parsing better channels should always use
the generated parser.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
The generated code handle possible endianess mismatch and check
for message format.
The copy back to "write_buf" allows to use that buffer to send
data back to device.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
"name" parameter of smartcard_channel_client_add_reader it's not
used.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
"self-tokens" property is 64 bit and must be passed as 64 bit on
32 bit machines to avoid memory corruptions.
This was introduced by 01de3b8922 ("spicevmc: Avoids DoS if
guest device is not able to get data faster enough"), detected by CI.
It caused this error (split into multiple lines):
(./test-leaks:15879): GLib-GObject-CRITICAL **: 14:03:59.650: \
g_object_new_is_valid_property: object class 'RedCharDeviceSpiceVmc' has \
no property named '\xb0/@\xf3\u0001'
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This fix half (one direction) of
https://gitlab.freedesktop.org/spice/spice/issues/29.
Specifically if you have attempt to transfer a file from the client
using WebDAV.
Previously the queue to the device was unbound. If device was not
getting data fast enough the server started queuing data.
To easily test this you can suspend the WebDAV daemon while transferring
a big file from the client.
To simplify the code and reduce the changes server buffers are
used. This as client token implementation is written with agent
in mind. While when we exhaust server tokens RedCharDevice doesn't
close the client when we exhaust client tokens RedCharDevice closes
the client which in this case it's not wanted.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
If the client is keeping sending data while we can't handle them
(for instance because we need to forward to a device but the
device is not fast enough to receive that amount of data) allows
to stop RedChannelClient to read data.
This after a bit will stop the client sending data as its output
buffer will become full.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This fix half (one direction) of
https://gitlab.freedesktop.org/spice/spice/issues/29.
Specifically if you have attempt to transfer a file to the client
using WebDAV.
Previously the queue to the client was unbound. If client was not
getting data fast enough the server started queuing data.
To easily test this you can use a tool to limit bandwidth and
transfer a big file (I used a "dd if=/dev/zero bs=1M of=test") from
the guest.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
As we don't use any token there's no reason to not queue directly instead
of passing through RedCharDevice.
This will make easier to limit the queue which currently is unlimited.
RedCharDevice flow control has some problems:
- it's really designed with VDI in mind. This for SpiceVMC would cause
code implementation to be confusing having to satisfy the agent token
handling;
- it's using items as unit not allowing counting bytes;
- it duplicates some queue management between RedChannelClient;
- it's broken (see comments in char-device.h);
- it forces "clients" to behave in some way not altering for instance the
queued items (which is very useful if items can be collapsed together);
- it replicates the token handling on the device queue too. This could
seems right but is not that if you have a network card going @ 1 GBit/s
you are able to upload more than 1 Gbit/s just using multiple
connections. The kernel will use a single queue for the network interface
limiting and sharing de facto the various buffers between the multiple
connections.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
It does not make sense to have a graphic card without a monitor.
In spice_qxl_set_max_monitors we prevent to set 0 monitors, do
the same in spice_qxl_set_device_info.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1691721.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
As now is an opaque type for RedCharDevice use the type that
better suits us.
This avoid useless conversions or look ups.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
RedClient was an opaque structure for RedCharDevice.
It started to be used when RedsState started to contain all
the global state.
Make it opaque again using a new RedCharDeviceClientOpaque.
The RedCharDeviceClientOpaque define in the header allows users
of the class to override the type to get a more safe type
than RedClient.
The define at the beginning of C file is to make sure we don't
use the opaque type as a specific one.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
No much reason for not inlining it, it's quite small and do
not reduce readability.
Note that spice_server_migrate_switch is deprecated and not
used by Qemu since commit 67be6726b6459472103ee87ceaf2e8e97c154965
(cfr "spice: raise requirement to 0.12" September 2012).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This patch enables the SPICE_DISPLAY_CAP_PREF_VIDEO_CODEC_TYPE
capability for the stream-channel.
video_stream_parse_preferred_codecs: new function for parsing the
SPICE protocol message. This code used to in inside
dcc_handle_preferred_video_codec_type.
struct StreamChannelClient::client_preferred_video_codecs: new field.
Signed-off-by: Kevin Pouget <kpouget@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
spice_assert is a macro and covscan reports that:
Argument "++twice_remove_called" of spice_assert() has a side effect.
Doesn't matter if there is a side effects or not,
it's a good practice and it makes covscan happy, so
increment the variable one line above.
Signed-off-by: Uri Lublin <uril@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
There may to be another function (cache_alt_names) between
gnutls_x509_ext_import_subject_alt_names and
gnutls_x509_crt_import
cache_alt_names is a static function in gnutls/lib/x509/x509.c
used only in gnutls_x509_crt_import and may be inlined by
the compiler.
Signed-off-by: Uri Lublin <uril@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This is currently more style patch as the "value" field is the
first field of SpiceStatNode structure, so has offset 0. However
to compute the containing structure it better to use the proper
macro to avoid confusion.
If the offset won't be 0 the subtraction would compute the
wrong pointer as the offset is expressed in bytes but the
element size are uint64_t.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
spice_server_migrate_client_state was removed by
commit 3c6b4e415f
Author: Marc-André Lureau <marcandre.lureau@gmail.com>
Date: Fri Oct 24 17:16:35 2014 +0200
Remove spice-experimental
Remove unneded symbols that nobody should be using anyway.
ABI is modified with this patch, but the library version is not bumped.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Uri Lublin <uril@redhat.com>
The GLZ code is basically LZ code (in spice-common) sharing image
segments between multiple images.
The code for RLE check in LZ (common/lz_compress_tmpl.c) is dealing
with both RLE and dictionary matches being:
if (!distance) {
/* zero distance means a run */
PIXEL x = *ref;
while ((ip < ip_bound) && (ref < ref_limit)) { // TODO: maybe separate a run from
// the same seg or from different
// ones in order to spare
// ref < ref_limit
in GLZ that part was copied to RLE part removing the need for the
second segment ("ref"). However the comment and setting ref variables
were not removed. Remove the old code to avoid confusions.
This also remove a Covscan warning as ref_limit was set not not used
(reported by Uri Lublin).
The warning was:
CLANG warning: "Value stored to 'ref_limit' is never read"
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Uri Lublin <uril@redhat.com>
On LLP64 platforms (like Windows) a virtual address cannot be
represented by a "unsigned long" type, so use uintptr_t which is
defined as an integral type large like a pointer.
"address_delta" and "addr_delta" are a difference of pointers so use
same type size.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Snir Sheriber <ssheribe@redhat.com>
On 32 systems pointers are 32 bit while QXLPHYSICAL is always
64 bit.
Using pointer -> intptr_t -> QXLPHYSICAL conversion cause pointers
to have higher 32 bit set to 1 if the address is >= 0x80000000.
This is possible depending on address space.
The QXLPHYSICAL is split in 3 sections:
- slot ID;
- generation;
- virtual address.
Current utility using record file (spice-server-replay) set slot ID
and generation to 0 so if the higher bits become all 1 slot ID and
generation won't be 0 causing the utility to fail.
Use pointer -> uintptr_t -> QXLPHYSICAL conversion to avoid this
issue.
Note that for opposite conversion (QXLPHYSICAL_TO_PTR) the conversion
does not change, type is changed just for consistency.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Snir Sheriber <ssheribe@redhat.com>
Threads are joined by spice_server_destroy, just need to release
last resources.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Snir Sheriber <ssheribe@redhat.com>
There are no much data other than the buffer, reduce the
allocations.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Just a style change, return earlier to avoid some indentation.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Instead of having to manually register the file descriptor and
than need to call dispatcher_handle_recv_read just provide a single
API to create the watch.
This has some advantage:
- replace 2 API with 1;
- code reuse for handling the event (removed 2 functions);
- avoid the caller to use the file descriptor;
- avoid the caller to register wrong events.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
The 2 callers red_char_device_send_to_client_tokens_set and
red_char_device_send_to_client_tokens_add are doing mostly
the same thing so put common code to
red_char_device_send_to_client_tokens_absorb.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
The function is called only by red_channel_pipes_new_add.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Unused.
Also the devices should be able to release themselves.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
In some configuration _GNU_SOURCE is defined by the compiler
and defining again cause a warning.
Do not define again to avoid the warning.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
