Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
[ TL: extend subject and use more specific build-dir glob ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
While there already is a warning from QEMU proper, that one is not
visible as a task warning and it's not straightforward to make it be
one, because QEMU is started inside a run_fork(). It's also more
future-proof to have the detection explicit on our side and the
documentation can be referenced.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
by remembering the 'forcemachine' parameter that's passed along when
starting the target instance.
In preparation to introduce a call to get_current_qemu_machine after
starting a VM to check for machine version deprecation.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
by adding a comment and grouping the code better. See the PVE QEMU
patch "PVE: Allow version code in machine type" for reference. The way
the code was written previously made it look like a bug where
$pve_version might be overwritten multiple times.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This can seemingly need a bit longer than expected, and better than
erroring out on migration is to wait a bit longer.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
As the ha-manager accessed rather internal details before that
version, and the memory property changing to a format-string with sub
properties in 7f8c808 ("add memory parser") breaks that access, so
ensure the installed ha-manager is using the newer
get_derived_property method to access that information cleanly.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The vCPUs are passed as devices with specific id only when CPU
hot-plug is enable at cold start.
So, we can't enable/disable allow-hotplug online as then vCPU hotplug
API will thrown errors not finding core id.
Not enforcing this could also lead to migration failure, as the QEMU
command line for the target VM could be made different than the one it
was actually running with, causing a crash of the target as Fiona
observed [0].
[0]: https://lists.proxmox.com/pipermail/pve-devel/2023-October/059434.html
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
[ TL: Reflowed & expanded commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by including the errno. Might make it clearer what the issue is in
cases like: https://forum.proxmox.com/threads/135261/
Also add the missing newlines, the missing "to" in the second message,
switch to the more common "or die" and avoid line bloat while at it.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Fix races with ACPI-suspended VMs which could wake up during migration
or during a suspend-mode backup.
Revert prevention, of ACPI-suspended VMs automatically resuming after
migration, introduced by 7ba974a682. The commit introduced a
potential problem that causes a suspended VM that wakes up during
migration to remain paused after the migration finishes.
This can be fixed once QEMU preserves the 'suspended' runstate during
migration (current patch on the qemu-devel list [0]) by checking for
the 'suspended' runstate on the target after migration.
Furthermore the commit increased the race window during the
preparation of a suspend-mode backup, when a suspended VM wakes up
between the vm_is_paused check in PVE::VZDump::QemuServer::prepare and
PVE::VZDump::QemuServer::qga_fs_freeze. This causes the code to skip
fs-freeze even if the VM has woken up, potentially leaving the file
system in an inconsistent state.
To prevent this, do not treat the suspended runstate as paused when
migrating or archiving a VM.
[0]: https://lists.nongnu.org/archive/html/qemu-devel/2023-08/msg05260.html
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
[ TL: massage in Fiona's extra info into commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since commit 2dc0eb61 ("qm: assume correct VNC setup in 'vncproxy',
disallow passwordless"), 'qm vncproxy' will just fail when the
LC_PVE_TICKET environment variable is not set. Since it is not only
required in combination with websocket, drop that conditional.
For the non-serial case, this was the last remaining effect of the
'websocket' parameter, so update the parameter description.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Since commit 3e7567e0 ("do not use novnc wsproxy"), the websocket
upgrade is done via the HTTP server.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Add checks for "suspended" and "prelaunch" runstates when checking
whether a VM is paused.
This fixes the following issues:
* ACPI-suspended VMs automatically resuming after migration
* Shutdown and reboot commands timing out instead of failing
immediately on suspended VMs
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
The default VM startup timeout is `max(30, VM memory in GiB)` seconds.
Multiple reports in the forum [0] [1] and the bug tracker [2] suggest
this is too short when using PCI passthrough with a large amount of VM
memory, since QEMU needs to map the whole memory during startup (see
comment #2 in [2]). As a result, VM startup fails with "got timeout".
To work around this, set a larger default timeout if at least one PCI
device is passed through. The question remains how to choose an
appropriate timeout. Users reported the following startup times:
ref | RAM | time | ratio (s/GiB)
---------------------------------
[1] | 60G | 135s | 2.25
[1] | 70G | 157s | 2.24
[1] | 80G | 277s | 3.46
[2] | 65G | 213s | 3.28
[2] | 96G | >290s | >3.02
The data does not really indicate any simple (e.g. linear)
relationship between RAM and startup time (even data from the same
source). However, to keep the heuristic simple, assume linear growth
and multiply the default timeout by 4 if at least one `hostpci[n]`
option is present, obtaining `4 * max(30, VM memory in GiB)`. This
covers all cases above, and should still leave some headroom.
[0]: https://forum.proxmox.com/threads/83765/post-552071
[1]: https://forum.proxmox.com/threads/126398/post-592826
[2]: https://bugzilla.proxmox.com/show_bug.cgi?id=3502
Suggested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
In preparation to add more properties to the memory configuration like
maximum hotpluggable memory and whether virtio-mem devices should be
used.
This also allows to get rid of the cyclic include of PVE::QemuServer
in the memory module.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
[FE: also convert new usage in get_derived_property
remove cyclic include of PVE::QemuServer
add commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
moving qemu_{device,object}{add,del} helpers there for now.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module and generally for better modularity in the future.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
PVE::QemuServer::check_running() does both
PVE::QemuConfig::assert_config_exists_on_node()
PVE::QemuServer::Helpers::vm_running_locally()
The former one isn't needed here when doing hotplug, because the API
already assert that the VM config exists. It also would introduce a
new cyclic dependency between PVE::QemuServer::Memory <->
PVE::QemuConfig with the proposed virtio-mem patch set.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
which is the only user of the parse_numa() helper. While at it, avoid
the duplication of MAX_NUMA.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
10 minutes is not long enough when disks are large and/or network
storages are used when preallocation is not disabled. The default is
metadata preallocation for qcow2, so there are still reports of the
issue [0][1]. If allocation really does not finish like the comment
describing the timeout feared, just let the user cancel it.
Also note that when restoring a PBS backup, there is no timeout for
disk allocation, and there don't seem to be any user complaints yet.
The 5 second timeout for receiving the config from vma is kept,
because certain corruptions in the VMA header can lead to the
operation hanging there.
There is no need for the $tmp variable before setting back the old
timeout, because that is at least one second, so we'll always be able
to set the $oldtimeout variable to undef in time in practice.
Currently, there shouldn't even be an outer timeout in the first
place, because the only call path leading to here is via the create
API (also used by qmrestore), both of which don't set a timeout.
[0]: https://forum.proxmox.com/threads/126825/
[1]: https://forum.proxmox.com/threads/128093/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In preparation to turn the 'machine' parameter into a property string.
parse_property_string checks for the regex, therefore the test-cases
with 'somemachine' and 'someothermachine' would fail.
To avoid that, replace 'somemachine' and 'someothermachine' with 'q35'
and 'pc' with sed:
sed -i 's/somemachine/q35/g'
sed -i 's/someothermachine/pc/g'
Signed-off-by: Markus Frank <m.frank@proxmox.com>
[FE: improve wording in commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Skip the software TPM startup when starting a template VM for performing
a backup. This fixes an error that occurs when the TPM state disk is
write-protected.
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
Quoting from QEMU commit 4271f40383 ("virtio-net: correctly report
maximum tx_queue_size value"):
> Maximum value for tx_queue_size depends on the backend type.
> 1024 for vDPA/vhost-user, 256 for all the others.
> So the parameter is silently ignored and ethtool reports a different
> value than the one provided by the user.
Indeed, for a non-vDPA/vhost-user netdev, the guest will see TX: 256
instead of the specified 1024 here. With the mentioned QEMU commit (in
master and will be part of 8.1), using 1024 will be a hard error:
> Invalid tx_queue_size (= 1024), must be a power of 2 between 256 and 256
Since neither vhost-user, nor vhost-vdpa netdev types are exposed by
Proxmox VE, just changing the limit to the correct 256 should be fine.
No obvious issue during live-migration found.
Fixes: 620d6b32 ("virtio-net: increase defaults rx|tx-queue-size to 1024")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While the comment sated
> # order of precedence, filtered by whether storage supports it:
> # 1. explicit requested format
> # 2. format of current volume
> # 3. default format of storage
the code did not fall back to the default format in the case of remote
migration, because the format was already set and the code used
> $format //= $defFormat;
This made remote migration from dir with qcow2 to e.g. LVM-thin fail.
Move extracting the format from the volume name to the call side for
local migration. This allows the logic here to be much simpler.
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Previously, qemu_img_format() was called with the target storage's
$scfg and the source storage's volume name.
This mismatch should only be relevant for certain special kinds of
storage plugins:
- no path, but does support an additional QEMU image format besides
'raw', in short NPAF.
- no path, volume name can match QEMU_FORMAT_RE, in short NPVM.
Note that all integrated plugins are neither NPAF nor NPVM.
Note that for NPAF plugins, qemu_img_format() already always returns
'raw' because there is no path. It's a bit unlikely such a plugin
exists, because there were no bug reports about qemu_img_format()
misbehaving there yet.
Let's go through the cases:
- If source and target storage both have or don't have a path,
qemu_img_format($scfg, $volname) returns the same for both $scfg's.
- If source storage has a path, but target storage does not, the
format hint was previously 'raw', but can only be more correct now
(being what the source image actually is):
- For non-NPAF targets, since we know there is no path, it follows
that 'raw' is the only supported QEMU image format.
- For NPAF targets, the format will be preserved now (if actually
supported).
- If source storage does not have a path, but target storage does, the
format hint will be 'raw' now.
- For non-NPVM sources, QEMU_FORMAT_RE didn't match when
qemu_img_format() was called with the target storage's $scfg, so
the hint also was 'raw' before this commit.
- For NPVM sources, qemu_img_format() might've guessed a format from
the source volume name when called with the target's $scfg before
this commit. If the target storage supports the previously guessed
format, it was preserved before this commit, but will not be
anymore. In theory, the guess might've also been wrong, and in
this case, this commit avoids the wrong guess.
To summarize, there is only one edge case with an exotic kind of third
party storage plugin where format preservation would be lost and in
another edge case, format preservation is gained.
In preparation to simplify the format fallback logic implementation.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Trying to regenerate a cloudinit drive as a non-root user via the API
currently throws a Perl error, as reported in the forum [1]. This is
due to a type mismatch in the permission check, where a string is
passed but an array is expected.
[1] https://forum.proxmox.com/threads/regenerate-cloudinit-by-put-api-return-500.124099/
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
The new ciupgrade option was missing in $cloudinitoptions in
PVE::API2::Qemu, so $check_vm_modify_config_perm defaulted to
requiring root@pam for modifying the option. To fix this, add
ciupgrade to $cloudinitoptions. This also fixes an issue where
ciupgrade was missing in the output of `qm cloudinit pending`,
as it also relies on $cloudinitoptions.
This issue was originally reported in the forum [0].
Also add a comment to avoid similar issues when adding new options in
the future.
[0]: https://forum.proxmox.com/threads/131043/
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
Only unit 0 for IDE is supported with machine type q35. Currently,
QEMU will fail startup with machine type q35 with an error like
> Can't create IDE unit 1, bus supports only 1 units
when ide1 or ide3 is configured.
Make sure to keep backwards compat form migration by leaving ide0 and
ide2 fixed. Since starting with ide1 or ide3 never worked, they can be
moved to a controller with a higher ID without issue.
Reported in the community forum:
https://forum.proxmox.com/threads/124615/post-543127https://forum.proxmox.com/threads/130815/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
None of the configured test storages support the content type iso
right now, just add it to cifs-store.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While such entries shuoldn't exist in practice without manually
messing around, it's not hard to imagine, and there's still a good
chance the actual VMID can still be found.
It's still unexpected to encounter such entries so keep the log line.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
by also expecting the ".scope" part and trying the next entry if it is
not present instead of immediately failing.
It's still unexpected to encounter such entries, so keep the log line.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
On a hybrid cgroup system, the /proc/<PID>/cgroup file looks like
> 13:pids:/qemu.slice/110.scope
> 12:perf_event:/
> 11:devices:/qemu.slice
> 10:misc:/
> 9:hugetlb:/
> 8:freezer:/
> 7:cpu,cpuacct:/qemu.slice/110.scope
> 6:memory:/qemu.slice/110.scope
> 5:rdma:/
> 4:cpuset:/
> 3:blkio:/qemu.slice
> 2:net_cls,net_prio:/
> 1:name=systemd:/qemu.slice/110.scope
> 0::/qemu.slice/110.scope
but the order doesn't seem to be deterministic, so it can happen that
an entry like '11:devices:/qemu.slice' is the first to match the
'/qemu.slice' part, which previously made the code expect to find the
VMID.
To improve detection, as a first step, match the trailing slash too.
Reported in the community forum:
https://forum.proxmox.com/threads/129320/post-571654
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
factor the common checks for disk-less and "normal" backups out into
its own helper, avoiding code duplication and ensuring that the
messages and checks stay in sync.
The use sites for key and master key are a bit clearer, as it all
just depends on them being defined or not.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
.. and make it use a warn level, which can then also mark the whole
task as potentially problematic as with a new enough pve-guest-common
the REST environment worker warn counters are then increased.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
