[WHY]
SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent
mode after reading LTTPR Capability registers on HPD.
The wording of the SCR is somewhat ambiguous as to whether
Transparent mode must be set explicity, or is implicitly set on LTTPR
capability read. Explicitly setting Transparent mode after LTTPR
capability read should cover all
cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 requires that LTTPR caps be read first on hotplug.
For the sake of consistency, this should also be the case on bootup.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want LTTPR capabilities to be readable from more places than just
retrieve_link_cap
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing
read from DPCD upon hotplug.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improve the maintain/read abilities of dm code.
[How]
Create amdgpu_dm_psr.c/h files.
Move psr function from amdgpu_dm.c
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixed:
- LTTPR improvements
- Backlight improvements
- eDP hotplug detection
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To change the swizzle visual confirm reference pipe from top pipe to
bottom pipe due to bottom pipe information would be more important
for multiple overlay case.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move mst start top mgr in dc_link_detect layer.
Remove unused same_dpcd variable.
Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY
to the proper header for defining dc link internal constant.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Tune backlight ramping profiles for each Vari-Bright level to suit
customer preferences
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some custom platforms use eDP hotplug events to notify panel
capability changes that should be reported
[How]
Add a DC config option that unblocks eDP hotplug events
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Ability to triage DMCUB is improved with availability of certain
dmub registers not currently captured in crash dump diagnostic data.
[HOW]
Add dmub registers to diagnostic data collection.
Thanks Nicholas Kazlauskas for awesome input on this!
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.
v2: squash in unused variable removal.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a gcc '-Wunused-const-variable' warning:
drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:152:23: warning:
'hyperv_modifiers' defined but not used [-Wunused-const-variable=]
while the variable should be used in drm_simple_display_pipe_init()
as suggested by Thomas, let's fix it.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615031401.231751-1-pulehui@huawei.com
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GECC and G6 mem training are mutually exclusive
functionalities. VBIOS/PSP will set the flag
(BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in
runtime database to indicate whether dram memory
training need to be disabled or not.
For Navi1x families, two stage mem training is always
enabled.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime boot_cfg_bitmask carries various psp bl
feature bit mask that can be used by driver. Cache
it in sw_init for further usage.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP will dump various boot up information into a
portion of local frame buffer, called runtime database.
The helper function is used for driver to query those
shared information.
v2: init ret and check !ret to exit loop as soon as
found the entry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime database is used to share various
boot up information with driver.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dynamic GECC allows user to specify GECC enablement
status, which will take effect in next boot cycle.
v2: initialize boot_cfg to 0xFF
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More boot configs need to be supported via
BOOTCFG_CMD_SET
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp_gfx_uresp_bootcfg is used to inform driver
bootcfg settings maintained by tOS
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CoherentHostAccess flag support has moved from HSA_MEMORYPROPERTY
to HSA_CAPABILITY struct. Proper changes have made also at the thunk
to support this change.
CoherentHostAccess: whether or not device memory can be coherently
accessed by the host CPU.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
PG registers are absent in beige goby, so programming these registers
generate call trace. Fix this by adding a dummy function in dcn303
initialization function which prevents writing to non existant registers.
Fixes: cd6d421e3d ("drm/amd/display: Initial DC support for Beige Goby")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on yellow_carp
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on renoir.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to fix a failure for SDMA updating PTEs.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use adev_to_drm() to get to the drm_device pointer.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
psp ring wptr is not initialized properly in ring_create,
which would lead to psp failure after several gpu reset.
[How]
Set ring_wptr to zero in psp_ring_create.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On aldebaran, only primary die fetches valid power data. Show
power/energy values as 0 on secondary die. Also, power limit should not
be set through secondary die.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.
V2: add support for out-of-band of other ASICs
align cached current power limit with OOB imposed
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs.
However, for certain IP block (VCN for example), it may have 2 instances and
both of them have the same hw_id, BUT they have different revision number (0 and 1).
In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects
the result and returns false information
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For BACO scenario, PMFW will handle the dpm features disablement
and interaction with RLC properly. Driver involvement is unnecessary
and error prone.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some ASICs, the real dpm feature disablement job is handled by
PMFW during baco reset and custom pptable loading. Cached dpm feature
status need to be updated to pair that.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To correctly kick into BACO state, the audio dev's D-state
transition(D0->D3) needs to be PMFW-aware. So, if the audio
dev entered D3 state prior to our driver, we need to bring
it back to D0 state and make sure there will be a D-state
transition on runpm suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Via the fSMC_MSG_ArmD3 message, PMFW can properly act on the
Dstate change. Driver involvement for determining the timing for
BACO enter/exit is not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to
be incomplete. Another fix(see link below) has been sent out.
Link: https://lore.kernel.org/linux-pci/20210602021255.939090-1-evan.quan@amd.com/
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The application should be programming the application ID, not
the kernel, as there can be several options to choose from,
and setting the application ID multiple times can cause issues.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
-----BEGIN PGP SIGNATURE-----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=tY/d
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
UAPI Changes:
- Disable mmap ioctl for gen12+ (excl. TGL-LP)
- Start enabling HuC loading by default for upcoming Gen12+
platforms (excludes TGL and RKL)
Core Changes:
- Backmerge of drm-next
Driver Changes:
- Revert "i915: use io_mapping_map_user" (Eero, Matt A)
- Initialize the TTM device and memory managers (Thomas)
- Major rework to the GuC submission backend to prepare
for enabling on new platforms (Michal Wa., Daniele,
Matt B, Rodrigo)
- Fix i915_sg_page_sizes to record dma segments rather
than physical pages (Thomas)
- Locking rework to prep for TTM conversion (Thomas)
- Replace IS_GEN and friends with GRAPHICS_VER (Lucas)
- Use DEVICE_ATTR_RO macro (Yue)
- Static code checker fixes (Zhihao)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMHeDxg9VLiFtyn3@jlahtine-mobl.ger.corp.intel.com
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
to deal with usage counter. pm_runtime_get_sync() increases the
usage counter even when it failed, which makes callers to forget
to decrease the usage counter and resulted in reference leak.
pm_runtime_resume_and_get() function decreases the usage counter
when it failed internally so it can avoid the reference leak.
Changelog v1:
- Fix an build error reported by kernel test robot of Intel.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reported-by: kernel test robot <lkp@intel.com>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle to avoid continuing to increase the refcount
when pm_runtime_get_sync fails.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
amd-drm-fixes-5.13-2021-06-09:
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
radeon:
- memcpy_to/from_io fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610035631.3943-1-alexander.deucher@amd.com
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMJI5gAKCRDj7w1vZxhR
xcsYAP4wuNYRR+xk96UWrR/pdgxjwUVas6LW3DMlS+VL5sKhyAD+P0Jhapz/O2jy
xv5rdKBy91roau+8ZIln6Z1CFsOC3AI=
=/iun
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix for snu4i that prevents it from probing, two locking fixes for
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
3539:12-42: duplicated argument to && or ||
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
5677:87-123: duplicated argument to && or ||
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an
element.
Clean up the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/core/dc_resource.c:448:47-48: WARNING:
Use ARRAY_SIZE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c: clk_mgr.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for aldebaran.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for renoir.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for vangogh.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for sienna cichlid.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for navi1x.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for arcturus.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines smu_cmn_get_indep_throttler_status which performs ASIC
independent translation given a corresponding lookup table.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new defines for thermal throttle status bits which are ASIC
independent. This bit field will be visible to userspace via
gpu_metrics alongside the previous ASIC dependent bit fields. Seperated
into four types: power throttlers (16 bits), current throttlers (16
bits), temperature (24 bits), other (8 bits).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch set adds support for a new ASIC independant u64 throttler
status field (indep_throttle_status). Piggybacks off the
gpu_metrics_v1_3 bump and similarly bumps gpu_metrics_v2 version (to
v2_2) to add field.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case with xgmi connected to cpu load alternate psp fw
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes handling when page tables are in system memory.
v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.
After commit 001d8dc338 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.
Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.
For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 001d8dc338 ("drm/msm/dsi: remove temp data from global pll structure")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is the 3D GPU found on the i.MX8MP SoC. The feature bits are
taken from the NXP downstream kernel driver 6.4.3.p1.305572.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
This fixes 32-bit arm build due to lack of 64-bit divides.
Fixes: cb1c81467a ("drm/ttm: flip the switch for driver allocated resources v2")
Link: https://patchwork.freedesktop.org/patch/438442/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drop disabling of gfxoff during VCN use. This allows gfxoff
to kick in and potentially save power if the user is not using
gfx for color space conversion or scaling.
VCN1.0 had a bug which prevented it from working properly with
gfxoff, so we disabled it while using VCN. That said, most apps
today use gfx for scaling and color space conversion rather than
overlay planes so it was generally in use anyway. This was fixed
on VCN2+, but since we mostly use gfx for color space conversion
and scaling and rapidly powering up/down gfx can negate the
advantages of gfxoff, we left gfxoff disabled. As more
applications use overlay planes for color space conversion
and scaling, this starts to be a win, so go ahead and leave
gfxoff enabled.
Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and
vcn_v1_0_ring_begin_use() so they are not affected by this
patch.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The meaning of 'default' for the enable_guc module parameter has been
updated to accurately reflect what is supported on current platforms.
So start using the defaults instead of forcing everything off.
Although, note that right now, the default is for everything to be off
anyway. So this is not a change for current platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164812.19045-2-matthew.brost@intel.com
We currently treat same slice mask as a same DBuf state and skip
updating the Dbuf slices, if we detect that.
This is wrong as if we have a multi to single pipe change or
vice versa, that would be treated as a same Dbuf state and thus
no changes required, so we don't get Mbus updated, causing issues.
Solution: check also mbus_join, in addition to slices mask.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527110106.21434-1-stanislav.lisovskiy@intel.com
CDCLK crawl feature allows to change CDCLK frequency
without disabling the actual PLL and doesn't require
a full modeset.
v2: - Added has_cdclk_crawl as a feature flag to
intel_device_info(Matt Roper)
- s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/
(Matt Roper)
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603065038.7298-1-stanislav.lisovskiy@intel.com
The calclulation of how many bytes we stuff into the
DSI pipeline for video mode panels is off by three
orders of magnitude because we did not account for the
fact that the DRM mode clock is in kilohertz rather
than hertz.
This used to be:
drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal
which would become for example for s6e63m0:
60 x 514 x 831 = 25628040 Hz, but mode->clock is
25628 as it is in kHz.
This affects only the Samsung GT-I8190 "Golden" phone
right now since it is the only MCDE device with a video
mode display.
Curiously some specimen work with this code and wild
settings in the EOL and empty packets at the end of the
display, but I have noticed an eeire flicker until now.
Others were not so lucky and got black screens.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 920dd1b142 ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.
v2: Fix formatting
v3: Fix the typo (Mansi)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3 ("drm/msm/a6xx: Clear shadow on suspend")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd ("drm/msm/a6xx: set ubwc config for A640 and A650")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg]
Signed-off-by: Rob Clark <robdclark@chromium.org>
I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.
As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.
BTW, amdgpu has already done it in:
commit ba0b2275a6 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different
offsets for Sienna Cichlid
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_err meant broken user space could spam dmesg.
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.
Call Trace:
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x32/0xb0
kmalloc_order_trace+0x1e/0x80
__kmalloc+0x249/0x2d0
amdgpu_bo_create+0x102/0x500 [amdgpu]
? xas_create+0x264/0x3e0
amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AUX logic is often clocked from cdclk. Disable PSR to make sure
there are no hw initiated AUX transactions in flight while we
change the cdclk frequency.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-2-gwan-gyeong.mun@intel.com
This introduces the following function that can exit and activate a psr
source when intel_psr is already enabled.
- intel_psr_pause(): Pause current PSR. It deactivates current psr state.
- intel_psr_resume(): Resume paused PSR. It activates paused psr state.
v2: Address Jose's review comment.
- Remove unneeded changes around the intel_psr_enable().
- Add intel_psr_post_exit() which processes waiting until PSR is idle
and WA for SelectiveFetch.
v3: Address Jose's review comment.
- Rename intel_psr_post_exit() to intel_psr_wait_exit_locked().
- Move WA_1408330847 to intel_psr_disable_locked()
- If the PSR is paused by an explicit intel_psr_paused() call, make the
intel_psr_flush() not to activate PSR.
v4: Address Jose's review comment.
- In order to avoid the scenario of PSR is not active but there is a
scheduled psr->work, it changes the check routine of intel_psr_pause()
for PSR's enablement from "psr->active" to "psr->enable".
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-1-gwan-gyeong.mun@intel.com
There is not much value in the extra conversion step, the calculations
required for the LTDC IP are different than what is used in the
drm_display_mode_to_videomode(), so just do the right ones in the LTDC
driver right away.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
This is similar to IH_RB_CNTL programming in
navi10_ih_toggle_ring_interrupts
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support a new visual confirm mode: swizzle to show the specific
color at the screen border according to different surface swizzle mode.
Currently we only support the Linear mode with red color.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.
[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is an assert in cases where transition from ODM 2:1
to ODM 1:1 (bypass)
[How]
Remove assert since this case is now valid.
Update diags tests for ODM transitions.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found a use case (IPKVM) that DP-VGA active dongle does
not return any EDID and the mentioned commit broke it.
[How]
This reverts "Disconnect non-DP with no EDID"
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.
[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at
index num_states.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when
changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HW has handed down a new sequence that requires access to these
registers.
v2: squash in DCN3.1 fixes (Alex)
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HW has handed down a new sequence which requires access to the FIFO
ERRDET SW Override register.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Rearranging pipes with multiple displays and multiple planes cannot be
done atomically and requires a much improved sequence to deal with it.
[How]
To workaround such issues, prefer avoid pipe-split policy for
multidisplay scenarios.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.
[how]
Retaining sink object to be reused by SST link and
releasing MST resources.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allow specifying which panel to take PSR Residency
measurements from.
[how]
Pass panel instance to DMUB through GPINT in the upper
8 bits of the parameter.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Add call to get the last used VTOTAL from DC
Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
SET_CONFIG transactions with DMUB is not used and removed.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.
[How]
Perform scaling settings update on modeset.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add support for transmitting training pattern sequences for links whose
encoders have been dynamically assigned.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add functionality useful for DP equalization phase of link training to
public interface.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change was found to break some high-refresh modes. Reverting
to unblock mainline.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently there is no way to visually identify if there is one or more
layers presented fullscreen on the display
[HOW]
Add new visual confirm colors in get_surface_visual_confirm_color for
planes with layer_index > 0
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.
An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.
To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.
Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
[Why + How]
Visual confirm has no asic-specific logic,
so we can refactor and unify these functions
that are currently spread out across multiple
dcn files.
Add a new hw sequencer interface update_visual_confirm_color,
and a new mpc function pointer set_bg_color.
This will allow visual confirm to updated independently
of MPCC blending updates.
v2: squash in DCN3.1 fixes
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This disablement would be specific for Nav10 and shouldn’t be propagated to the other programs.
[How]
Power gating is controlled by driver.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DSCCLK validation is not necessary because DSCCLK is derrived from
DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too.
Doing DSCLK validation in addition to DISPCLK leads to modes being
wrongly rejected when DSCCLK was incorrectly set outside of DML.
[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DPRX will issue CP_IRQ when user disconnects a display
that has been authenticated.
Since display is being disconnecting dpcd read will fail.
This will cause us to attempt HDCP retry on disconnection.
We are adding a 100ms delay before retry.
So we will only start retry if within 100ms there is no disconnection call
to HDCP module.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating PSR interfaces to allow PSR enablement
per eDP panel.
[how]
- Copying PSR command structures to DC
- Changing function interfaces to pass panel instance
- Communicating with DMUB per link instead of assuming
to use a single one
-Iterating through all PSR capable panels when enabling/disabling
all
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DCC on/off, stutter period is calculated before DCC has fully transitioned.
This results in incorrect stutter period calculation.
[How]
Trigger a full update when DCC changes between on/off.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp added new feature to check fw buffer address for sriov vf. the
address range must be in vf fb.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to load xgmi ta for aldebaran sriov vf.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed mmhub system aperture and fb location for vf, no
need to program in guest side.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed the gfxhub fb location for vf, no need to
program in guest side.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed fb location registers for vf, no need to
check anymore.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel test robot throws warning ->
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:483:2:
warning: variable 'member_type' is used uninitialized whenever switch
default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:487:47:
note: uninitialized use occurs here
return yellow_carp_get_smu_metrics_data(smu, member_type, value);
^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:465:2:
note: variable 'member_type' is declared here
MetricsMember_t member_type;
^
1 warning generated.
Fix this warning by return errno when the clk type is unsupported.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create shadow BOs only for no-compute VM context and only for dGPU.
The existing if-condition would create shadow bo for compute context
on dGPU which not what we wanted.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match the order of definition to the structure's declaration to
help with locating included and missing functions of the API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and
attempt to wait on any channels which are still in use. When we iterate
over the CRTCs, we have:
* `i` - the index of the CRTC
* `channel` - the channel a CRTC is using
When we check the channel state, we consult:
old_hvs_state->fifo_state[channel].in_use
... but when we wait for the channel, we erroneously wait on:
old_hvs_state->fifo_state[i].pending_commit
... rather than:
old_hvs_state->fifo_state[channel].pending_commit
... and this bogus access has been observed to result in boot-time hangs
on some arm64 configurations, and can be detected using KASAN. FIx this
by using the correct index.
I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.
Trimmed KASAN splat:
| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
| dump_backtrace+0x0/0x2b4
| show_stack+0x1c/0x30
| dump_stack+0xfc/0x168
| print_address_description.constprop.0+0x2c/0x2c0
| kasan_report+0x1dc/0x240
| __asan_load8+0x98/0xd4
| vc4_atomic_commit_tail+0x1cc/0x910
| commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
| kasan_save_stack+0x2c/0x60
| __kasan_kmalloc+0x90/0xb4
| vc4_hvs_channels_duplicate_state+0x60/0x1a0
| drm_atomic_get_private_obj_state+0x144/0x230
| vc4_atomic_check+0x40/0x73c
| drm_atomic_check_only+0x998/0xe60
| drm_atomic_commit+0x34/0x94
| drm_client_modeset_commit_atomic+0x2f4/0x3a0
| drm_client_modeset_commit_locked+0x8c/0x230
| drm_client_modeset_commit+0x38/0x60
| drm_fb_helper_set_par+0x104/0x17c
| fbcon_init+0x43c/0x970
| visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
| which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
| 128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
| ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
| ^
| ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com
Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Will Deacon <will@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com
We need to grab the resv lock first before doing that check.
v2 (chk): simplify the change for -fixes
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130041.1683-1-christian.koenig@amd.com
Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c
CHECKs, no functional change. This is the same modification done
to V7 of the original patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608095322.23644-1-marex@denx.de
We discussed if that is really the right approach for quite a while now, but
digging deeper into a bug report on arm turned out that this is actually
horrible broken right now.
The reason for this is that vmf_insert_mixed_prot() always tries to grab
a reference to the underlaying page on architectures without
ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP.
So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead.
Also make sure to reject mappings without VM_SHARED.
v2: reject COW mappings, merge function with only caller
v3: adjust comment as suggested by Thomas
Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/amd/-/issues/1606#note_936174
Link: https://patchwork.freedesktop.org/patch/msgid/20210607135830.8574-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are
always derived from DSI clock lane, which is the usual mode of operation.
Support for clock from external oscillator is not implemented, but it is
easy to add if ever needed. Only RGB888 pixel format is implemented, the
LVDS666 is not supported, but could be added if needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
There are two spelling mistakes in dml_print messages, fix these and
clear up checkpatch warning on overly wide line length.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/than/then/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:
dce110_hw_sequencer.h is included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the parameter table_freed description on function description.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_svm.h is included duplicately in commit 42de677f79
("drm/amdkfd: register svm range").
After checking possible related header files,
remove the former one to make the code format more reasonable.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GTT allocations with a GART address the res contains the VMID0
addresses and can't be used for VM handling.
So ignore the res when the pages array is given or we fill the page
tables with nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The NV12 and VEGA10 share the same interface W/RREG32_SOC15*,
the callback functions in these macros may not be defined,
so NULL pointer must be checked but not in
macro __WREG32_SOC15_RLC__, fixing the lock of NULL pointer check.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable support on APU
Reviewed-by: Changfeng <Changfeng.Zhu@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow the same apporach as GFX to handle SDMA
poison consumption. Send SIGBUS to application
when receives SDMA_ECC interrupt and issue gpu
reset either mode 2 or mode 1 to get the engine
back
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange->offset is for VRAM range mm_nodes, if multiple ranges share same
mm_nodes, migrate range back to VRAM will reuse the VRAM at offset of
the same mm_nodes. For system memory pages_addr array, the offset is
always 0, otherwise, update GPU mapping will use incorrect system memory
page, and cause system memory corruption.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV environment, KMD should access SDMA registers
through RLCG if GC indirect access flag enabled.
Using _SOC15 read/write macros ensures that they go
through RLC when the flag is enabled.
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
intel_dp_set_infoframes() call in intel_ddi_post_disable_dp() will
take care to disable all enabled infoframes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-4-jose.souza@intel.com
When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.
So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
Commit 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.
So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.
There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com
Virtual device inform if screen update is needed or not with
SYNTHVID_FEATURE_CHANGE message. Handle this message to set dirt_needed
flag.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-2-drawat.floss@gmail.com
DRM driver for hyperv synthetic video device, based on hyperv_fb
framebuffer driver. Also added config option "DRM_HYPERV" to enabled
this driver.
v2:
- Add support for gen2 VM
- Fixed review comments
v3:
- Split into multiple files as suggested by Thomas Zimmermann
- Fixed hibernation issue as suggested by Dexuan Cui
- Use ioremap_cache as suggested by Dexuan Cui
- Incorporated other review comments
v4:
- Fix bitrotted code
- Review comments
- Updated the copyright and license to match hyperv_fb
v5:
- Address review comments and rebased with drm-misc-next
v6:
- Minor code/comment improvement as suggested by Dexuan Cui
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-1-drawat.floss@gmail.com
We are calling the eviction_valuable driver callback at eviction time to
determine whether we actually can evict a buffer object.
The upcoming i915 TTM backend needs the same functionality for swapout,
and that might actually be beneficial to other drivers as well.
Add an eviction_valuable call also in the swapout path. Try to keep the
current behaviour for all drivers by returning true if the buffer object
is already in the TTM_PL_SYSTEM placement. We change behaviour for the
case where a buffer object is in a TT backed placement when swapped out,
in which case the drivers normal eviction_valuable path is run.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-8-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-8-thomas.hellstrom@linux.intel.com
If the bo is idle when calling ttm_bo_pipeline_gutting(), we unnecessarily
create a ghost object and push it out to delayed destroy.
Fix this by adding a path for idle, and document the function.
Also avoid having the bo end up in a bad state vulnerable to user-space
triggered kernel BUGs if the call to ttm_tt_create() fails.
Finally reuse ttm_bo_pipeline_gutting() in ttm_bo_evict().
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-7-thomas.hellstrom@linux.intel.com
Reading out of write-combining mapped memory is typically very slow
since the CPU doesn't prefetch. However some archs have special
instructions to do this.
So add a best-effort memcpy_from_wc taking dma-buf-map pointer
arguments that attempts to use a fast prefetching memcpy and
otherwise falls back to ordinary memcopies, taking the iomem tagging
into account.
The code is largely copied from i915_memcpy_from_wc.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20210602083818.241793-5-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-5-thomas.hellstrom@linux.intel.com
The internal ttm_bo_util memcpy uses ioremap functionality, and while it
probably might be possible to use it for copying in- and out of
sglist represented io memory, using io_mem_reserve() / io_mem_free()
callbacks, that would cause problems with fault().
Instead, implement a method mapping page-by-page using kmap_local()
semantics. As an additional benefit we then avoid the occasional global
TLB flushes of ioremap() and consuming ioremap space, elimination of a
critical point of failure and with a slight change of semantics we could
also push the memcpy out async for testing and async driver development
purposes.
A special linear iomem iterator is introduced internally to mimic the
old ioremap behaviour for code-paths that can't immediately be ported
over. This adds to the code size and should be considered a temporary
solution.
Looking at the code we have a lot of checks for iomap tagged pointers.
Ideally we should extend the core memremap functions to also accept
uncached memory and kmap_local functionality. Then we could strip a
lot of code.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-4-thomas.hellstrom@linux.intel.com
Fix the following coccicheck warning:
./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28:
duplicated argument to & or |
This commit fixes duplicate argument. It might be a typo.
But what I can do is to remove it now.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605032209.16111-1-wanjiabing@vivo.com
On sunxi boards that use HDMI output, HDMI device probe keeps being
avoided indefinitely with these repeated messages in dmesg:
platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy
not ready
There's a fwnode_link being created with fw_devlink=on between hdmi
and hdmi-phy nodes, because both nodes have 'compatible' property set.
Fw_devlink code assumes that nodes that have compatible property
set will also have a device associated with them by some driver
eventually. This is not the case with the current sun8i-hdmi
driver.
This commit makes sun8i-hdmi-phy into a proper platform device
and fixes the display pipeline probe on sunxi boards that use HDMI.
More context: https://lkml.org/lkml/2021/5/16/203
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
Currently only linear formats are supported in sun4i-drm driver, but
SoCs like H6 supports AFBC variant of some of them in multiple cores
(GPU, VPU, DE3). Panfrost already implements AFBC compression and is
sometimes confused what should be default choice (linear, AFBC) if DRM
driver is not explicit about modifier support (MiniMyth2 distro with
MythTV app).
After some discussion with Daniel Stone on #panfrost IRC, it was decided
to make modifiers in sun4i-drm explicit, to avoid any kind of guessing,
not just in panfrost, but everywhere. In fact, long term idea is to make
modifier parameter in drm_universal_plane_init() mandatory (non NULL).
Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605073534.3786194-1-jernej.skrabec@gmail.com
The new gpiod interface takes care of parsing the GPIO flags and to
return the logical value when accessing an active-low GPIO, so switching
to it simplifies a lot the driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-2-maxime@cerno.tech
If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to
the err_unprepare_hsm label. That label will then call
pm_runtime_disable and put_device on the DDC device.
We just retrieved the DDC device, so the latter is definitely justified.
However at that point we still haven't called pm_runtime_enable, so the
call to pm_runtime_disable is not supposed to be there.
Fixes: 10ee275cb1 ("drm/vc4: prepare for CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-1-maxime@cerno.tech
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-2-lucas.demarchi@intel.com
The functions can be called both in _rcu context as well
as while holding the lock.
v2: add some kerneldoc as suggested by Daniel
v3: fix indentation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-7-christian.koenig@amd.com
When the comment needs to state explicitly that this is doesn't get a reference
to the object then the function is named rather badly.
Rename the function and use it in even more places.
v2: use dma_resv_shared_list as new name
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-5-christian.koenig@amd.com
When the comment needs to state explicitly that this
doesn't get a reference to the object then the function
is named rather badly.
Rename the function and use rcu_dereference_check(), this
way it can be used from both rcu as well as lock protected
critical sections.
v2: improve kerneldoc as suggested by Daniel
v3: use dma_resv_excl_fence as function name
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-4-christian.koenig@amd.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-4-lucas.demarchi@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-5-lucas.demarchi@intel.com
Port the necessary changes from previous DCN versions.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable output on real display instead of virtual.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable compiling and using DCN3.1 ASICs with physical output.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To detect DCN3.1 ASICs and to enable the appropriate number of CRTCs,
pick the right validation paths for display formats and to use the
right DC interfaces.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Container for hardware resources and blocks for DCN3.1, also adds
new DC debug flags used with DCN3.1.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCUB has a deferred z10 restore process that needs signalling from
driver to occur. This needs to be done on any interface that programs
the hardware state or sequences where we expect to have the same
hardware state as before.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN3.1 specific hardware sequence programming - extending off of
our existing DCN3/DCN2 support.
Extend stream hardware sequencing to include new DCCG programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated interfaces for multiple eDP backlight caps.
Added support for interpreting the new BIOS command tables on DCN3.1.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New DTM interface is V3 and we need to extend our existing support
to enable HDCP on DCN3.1.
Version the helpers and fallback to the older versions on failure
in the new interfaces.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PANEL block handles embedded panel power and backlight programming.
This programming and sequencing is now owned by DMCUB and driver will
call into the interface for backlight status and programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU-B (Display Micro-Controller Unit B) is a display microcontroller
used for shared display functionality with BIOS and for advanced
power saving display features.
Extends the command header to include new DCN3.1 functionality.
Adds new interfaces to DC dmub interface as well for z-state support.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extends off of DCN3.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML (Display mode library) is used for calculating watermarks, bandwidth
and for validating display configurations.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for programming the DCN3.1 OPTC (Output Timing Controller)
HW Blocks:
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
There are no changes to OPP or MPC for DCN3.1, so the diagram will
include them in this patch.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the DIO (Display IO) block of DCN3.1 which controls
legacy HDMI/DP stream/link encoding.
HW Blocks:
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Includes some updates to core logic for link encoder assignment and
future support for new high bandwidth output.
v2: squash in unused variable fix (Alex)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds support for clock requests for the various parts of the DCN3.1 IP
and the interfaces and definitions for sending messages to SMU/PMFW.
Includes new support for z9/10, detecting SMU timeout and p-state
support enablement.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To determine whether the chip is yellow carp or not and which revision
it is.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We'll need these in driver for phy tuning in DCN3.1.
Multiple eDP support also requires understanding which LCD the backlight
curve in atombios is for.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add video_codecs query support for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW provides specific messages for setting fclk freq range thus adjust
the power level. There's misusing of these messages when setting
dpm mclk. Since actually mclk could adjust automatically complying with
fclk, remove standalone support for mclk dpm level setting.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds mode2 reset support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables editing sysfs file power_dpm_force_performance_level
for yellow carp. User could thus adjust the dpm forced level.
v2: enable fine grain control of GFXCLK only when in manual performance
level mode. In other mode, the min/max range of GFXCLK will be reset to
corresponding values.
Ex: To enable min 300MHz / max 600MHz gfx clocks
1) echo manual > /sys/bus/pci/devices/.../power_dpm_force_performance_level
2) echo s 0 300 > /sys/bus/pci/devices/.../pp_od_clk_voltage
3) echo s 1 600 > /sys/bus/pci/devices/.../pp_od_clk_voltage
4) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip disabled sa to correct the cu_info and active_rbs for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Suggested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register callback in gfxhub functions to program the bypass groups in
gc_utcl2 corresponding to harvested SA.
v2: update comments (Alex)
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add the interface to dump smu metrics table for yellow
carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the sysfs API for getting/setting pp_power_profile_mode for
yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function to get the hard frequency range of a clock domain
for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add get_vbios_bootup_values function to get the bootup values for yellow
carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add TA firmware to module firmware list for yellow carp and call
psp_init_ta_microcode to parse the TA firmware for HDCP support.
Cc: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver needs to notify the PMFW when the RLC is disabled.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the sysfs API to set a range of allowed DPM levels for
specific clock domain.
v2: return error directly if the specified clock type not supported
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the feature_enabled and feature_supported bitmap for yellow
carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement function to check if DPM is running for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the sysfs API for getting values of pp dpm
clocks(pp_dpm_socclk/mclk/fclk/vclk/dclk) for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the pp_od_clk_voltage sysfs file to configure the min and max value
of gfx clock frequency or to restore the default values.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should be
limited in the safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the
system only after the commit command, the setting target values
by "s" command will take effect
Example:
1) check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 600Mhz
OD_RANGE:
SCLK: 200MHz 600MHz
2) use "s" -- set command to configure the min or max sclk frequency
$ echo "s 0 300" > pp_od_clk_voltage
$ echo "s 1 500" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 300Mhz
1: 500Mhz
OD_RANGE:
SCLK: 200MHz 600MHz
3) use "r" -- reset command to restore the min and max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 600Mhz
OD_RANGE:
SCLK: 200MHz 600MHz
v2: modify the description of reset command usage - need to do "commit"
after set the restore command
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function set_watermarks_table for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function read_sensor for yellow carp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows software to query HW counters to timestamp submissions.
This patch can address KFDPerfCountersTest.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: chen gong <curry.gong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC_PG_DELAY_3 is to make RLC in safe mode to
prevent any misalignment or conflict in middle of any power
feature entry/exit sequence when CGPG feature is enabled.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add smu_post_init support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN 3.0 PG and CG for Yellow Carp by setting up flags.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable vcn dpg mode on yellow carp.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable vcn/jpeg IP on yellow carp.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn firmware support for yellow carp
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register CC_UVD_HARVESTING is obsolete on CHIP_YELLOW_CARP.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vcn/jepg enable functions to power up/down them
with smu messages. VCN/JEPG are poweroff by default.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH CG need to be enabled by driver.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ATHUB MGCG/MGLS is enabled by default.
Adding ATHUB MGCG/MGLS flag to ensure athub mgcg/ls enabled.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDP MGCG is enabled by default.
Adding AMD_CG_SUPPORT_HDP_MGCG to ensure hdp mgcg enabled.
HDP MGLS need to be enabled by driver.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gfx_off in smu_late_init for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable smu_hw_init for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds set_driver_table_location implementation for yellow
carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For yellow carp, SMU firmware just only supports get_pp_feature.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables psp_v13 for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds psp_v13 support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IP discovery enabled, the reserved buffer has been alloacted.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some ASICs such as Yellow Carp needs to reserve a region of video memory
to avoid access from driver. So this patch is to introduce a stolen
reserved buffer to protect specific buffer region.
v2: free this buffer in amdgpu_ttm_fini.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-and-Tested-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add gfx golden settings for yellow carp post si.
v2: squash in updates (Alex)
v3: squash in LDS update (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to partially enable swSMU for yellow carp for the moment.
V2: rename smu_v13_0 to smu_v13_0_1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For supporting yellow carp, we need to add smu13 ip
support for the moment.
V2: add smu_v13_0_1.c|h dedicated for apu.
V3: cleanup code.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v13.0.1 smc header for yellow carp.
v2: squash in updates (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v13.0.1 firmware header for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v13 driver interface header for yellow carp.
v2: squash in updates (Alex)
v3: squash in v69.29.0 update (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds nbio_7_2_1 support yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add GFX10 based Yellow Carp KFD support.
We will bypass IOMMU v2.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable ip blocks for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the sdma v5.2 support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets fw load type as direct with fw_load_type=0 for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx memory controller support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the support for yellow carp ih block.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds common ip support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds yellow_carp_reg_base_init function to init the register
base for yellow carp.
v2: squash in updates (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds yellow carp support for gpu_info firmware and ip
block setting.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds yellow carp to amd_asic_type enum and amdgpu_asic_name[].
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add yellow carp asic header files.
v2: squash in updates (Alex)
v3: squash in DCN updates (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.
As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.
BTW, amdgpu has already done it in:
commit ba0b2275a6 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also fix some coding issues reported from sparse.
Signed-off-by: Chen Li <chenli@uniontech.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1726:2-3: Unneeded semicolon
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV environment, KMD should access GC registers
with RLCG if GC indirect access flag enabled.
Using _SOC15 read/write macros ensures that they go
through RLC when flag is enabled.
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable this only for Sienna Cichild
since only Navi12 and Sienna Cichlid support SRIOV
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different
offsets for Sienna Cichlid
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integrate two generic functions to determine if HDP
flush is needed for all Asics.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove ASIC specific functions for BACO support check. Use generic smu11
function instead.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For smuv11, check for VF also during BACO check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid reading BIF STRAP each time for BACO capability. Read the STRAP
value while checking BACO capability in PPTable.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BACO/MACO is not applicable for aldebaran. Remove the redundant check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing on AMD Carizzo with DCE-11.0 display engine showed that
it doesn't like a 36 bpp linebuffer very much. The display just
showed a solid green.
Testing on RavenRidge DCN-1.0, Polaris11 with DCE-11.2 and Kabini
with DCE-8.3 did not expose any problems, so for now only revert
to 30 bpp linebuffer depth on asics with DCE-11.0 display engine.
Fixes: a316db7209 ("drm/amd/display: Increase linebuffer pixel depth to 36bpp.")
Reported-by: Tom StDenis <Tom.StDenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable active_disp is being initialized with a value that
is never read, it is being re-assigned immediately afterwards.
Clean up the code by removing the need for variable active_disp.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable k is being assigned a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to optimize memory mapping latency, and also aviod
a page fault in a corner case of changing valid PDE into
PTE.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to pass the flag to KFD, and optimize table_freed in
amdgpu_vm_bo_update_mapping.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is a part of memory mapping optimization.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to provide more tlb flush types option for different
case scenario.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_err meant broken user space could spam dmesg.
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.
Call Trace:
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x32/0xb0
kmalloc_order_trace+0x1e/0x80
__kmalloc+0x249/0x2d0
amdgpu_bo_create+0x102/0x500 [amdgpu]
? xas_create+0x264/0x3e0
amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV, driver should only access register through RLC in runtime
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add sysfs attrs to read smartshift APU and DGPU power share.
document the sysfs device attributes.
V2: change variable/macro name for stapm power limit (Lijo)
V3: files to be exposed as sysfs device attributes (Alex)
V4: check ret value of sysfs create and remove only if created.
V5: add ss attrs in amdgpu_device_attrs and use attr_update (Lijo)
V6: all checks for ss support to be in if else if statements. (Lijo)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value of the AFBC_FEATURES register is required by userspace to
determine AFBC support on Bifrost. A user on our IRC channel (#panfrost)
reported a workload that raised a fault on one system's Mali G31 but
worked flawlessly with another system's Mali G31. We determined the
cause to be missing AFBC support on one vendor's Mali implementation --
it turns out AFBC is optional on Bifrost!
Whether AFBC is supported or not is exposed in the AFBC_FEATURES
register on Bifrost, which reads back as 0 on Midgard. A zero value
indicates AFBC is fully supported, provided the architecture itself
supports AFBC, allowing backwards-compatibility with Midgard. Bits 0 and
15 indicate that AFBC support is absent for texturing and rendering
respectively.
The user experiencing the fault reports that AFBC_FEATURES reads back
0x10001 on their system, confirming the architectural lack of AFBC.
Userspace needs this parameter to know to disable AFBC on that
chip, and perhaps others.
v2: Fix typo from copy-paste fail.
v3: Bump the UABI version. This commit was cherry-picked from another
series so chalking this up to a rebase fail.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604130011.3203-1-alyssa.rosenzweig@collabora.com
Instead of both driver and TTM allocating memory finalize embedding the
ttm_resource object as base into the driver backends.
v2: fix typo in vmwgfx grid mgr and double init in amdgpu_vram_mgr.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602100914.46246-10-christian.koenig@amd.com
Access to the mm_node is now forbidden. So instead of hand wiring that
use the cursor functionality.
v2: fix handling as pointed out by Philip.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by and Tested-by: Philip Yang <philip.yang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602100914.46246-5-christian.koenig@amd.com
VEXPRESS_CONFIG needs to either be missing, built-in, or modular when
pl111 is modular. Update the Kconfig to reflect the need.
Fixes: 4dc7c97d04 ("drm/pl111: depend on CONFIG_VEXPRESS_CONFIG")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604014055.4060521-1-keescook@chromium.org
GuC has its own defines for the engine classes. They're currently
mapping 1:1 to the defines used by the driver, but there is no guarantee
this will continue in the future. Given that we've been caught off-guard
in the past by similar divergences, we can prepare for the changes by
introducing helper functions to convert from engine class to GuC class and
back again.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-21-matthew.brost@intel.com
Base offset and count of the GuC scratch registers, used for
sending MMIO messages to GuC, can be initialized earlier with
other GuC members that also depends on platform.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-20-matthew.brost@intel.com
Since most of future CT traffic will be based on G2H requests,
instead of copying incoming CT message to static buffer and then
create new allocation for such request, always copy incoming CT
message to new allocation. Also by doing it while reading CT
header, we can safely fallback if that atomic allocation fails.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-19-matthew.brost@intel.com
In irq handler try to receive just single G2H message, let other
messages to be received from tasklet.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-18-matthew.brost@intel.com
We are no longer using descriptor to hold G2H replies and we are
protecting access to the descriptor and command buffer by the
separate spinlock, so we can stop using mutex.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-17-matthew.brost@intel.com
Ensure H2G buffer updates are visible before descriptor tail updates by
inserting a barrier between the H2G buffer update and the tail. The
barrier is simple wmb() for SMEM and is register write for LMEM. This is
needed if more than 1 H2G can be inflight at once.
If this barrier is not inserted it is possible the descriptor tail
update is scene by the GuC before H2G buffer update which results in the
GuC reading a corrupt H2G value. This can bring down the H2G channel
among other bad things.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-16-matthew.brost@intel.com
We want to stop using guc.send_mutex while sending CTB messages
so we have to start protecting access to CTB send descriptor.
For completeness protect also CTB receive descriptor.
Add spinlock to struct intel_guc_ct_buffer and start using it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-15-matthew.brost@intel.com
Future GuC will require CTB buffers sizes to be multiple of 4K.
Make these changes now as this shouldn't impact us too much.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603230408.54856-2-matthew.brost@intel.com
Upcoming GuC firmware will always require just two CTBs and we
also plan to configure them with different sizes, so definining
them as array is no longer suitable.
v2: Use %p for ptrdiff print
v3: Use %tx for ptrdiff print
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603230408.54856-1-matthew.brost@intel.com
Static analysis identified an issue in skl_crtc_allocate_ddb where
mbus_offset may be used uninitialized.
This patch fixes it.
Fixes: 835c176cb1 ("drm/i915: Introduce MBUS relative dbuf offsets")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603215338.13804-1-manasi.d.navare@intel.com
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate
the possible output and input formats for the current mode and monitor,
and use the negotiated formats in a basic atomic_check callback.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
For each SoC, dpi support different output bus formats, so
add these information into driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The most important change here fixes a race condition that causes either
HDA or (more frequently) display to malfunction because they race for
enabling the SOR power domain at probe time.
Other than that, there's a couple of build warnings for issues
introduced in v5.13 as well as some minor fixes, such as reference leak
plugs.
-----BEGIN PGP SIGNATURE-----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=K0PC
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.13-rc5' of ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.13-rc5
The most important change here fixes a race condition that causes either
HDA or (more frequently) display to malfunction because they race for
enabling the SOR power domain at probe time.
Other than that, there's a couple of build warnings for issues
introduced in v5.13 as well as some minor fixes, such as reference leak
plugs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603144624.788861-1-thierry.reding@gmail.com
To support RGB888_2X12_LE and RGB888_2X12_BE, dpi should sample
on dual edge which could recude half data io pins.
For RGB888_1X24, dpi just sample on single edge (rising or falling
edge).
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
We can retrieve offsets to cmds buffers and descriptor from
actual pointers that we already keep locally.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-11-matthew.brost@intel.com
In upcoming GuC firmware, CTB size will be removed from the CTB
descriptor so we must keep it locally for any calculations.
While around, improve some debug messages and helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-10-matthew.brost@intel.com
Generic helpers should be placed in i915_utils.h.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-9-matthew.brost@intel.com
Stop using fence/status from CTB descriptor as future GuC ABI will
no longer support replies over CTB descriptor.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-8-matthew.brost@intel.com
Drop the variable guc->interrupts.enabled as this variable is just
leading to bugs creeping into the code.
e.g. A full GPU reset disables the GuC interrupts but forgot to clear
guc->interrupts.enabled, guc->interrupts.enabled being true suppresses
interrupts from getting re-enabled and now we are broken.
It is harmless to enable interrupt while already enabled so let's just
delete this variable to avoid bugs like this going forward.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-7-matthew.brost@intel.com
Our fwif.h file is now mix of strict firmware ABI definitions and
set of our helpers. In anticipation of upcoming changes to the GuC
interface try to keep them separate in smaller maintainable files.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-6-matthew.brost@intel.com
This action is no-op in the GuC side for a few versions already
and it is getting entirely removed soon, in an upcoming version.
Time to remove before we face communication issues.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-5-matthew.brost@intel.com
In GuC submission mode the CS is owned by the GuC FW, so all CS status
interrupts are handled by it. We only need the user interrupt as that
signals request completion.
Since we're now starting the engines directly in GuC submission mode
when selected, we can stop switching back and forth between the
execlists and the GuC programming and select directly the correct
interrupt mask.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-4-matthew.brost@intel.com
We have a couple of failure injection points in the CT enablement path,
so we need to use i915_probe_error() to select the appropriate log level.
A new macro (CT_PROBE_ERROR) has been added to the set of CT logging
macros to be used in this scenario and upcoming ones.
While adding the new macros, fix the underlying logging mechanics used
by the existing ones (DRM_DEV_* -> drm_*) and move the inlines to
before they're used inside the macros.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-3-matthew.brost@intel.com
If we're about to sanitize the GuC, something might have going wrong
beforehand, so we should avoid trying to talk to it. Even if GuC is
still running fine, the sanitize will reset its internal state and clear
the CTB registration, so there is still no need to explicitly do so.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2469
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-2-matthew.brost@intel.com
amd-drm-next-5.14-2021-06-02:
amdgpu:
- GC/MM register access macro clean up for SR-IOV
- Beige Goby updates
- W=1 Fixes
- Aldebaran fixes
- Misc display fixes
- ACPI ATCS/ATIF handling rework
- SR-IOV fixes
- RAS fixes
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes for suspend/resume
- More buffer object subclassing work
- Add new INFO query for additional vbios information
- Add new placement for preemptable SG buffers
amdkfd:
- Misc fixes
radeon:
- W=1 Fixes
- Misc cleanups
UAPI:
- Add new INFO query for additional vbios information
Useful for debugging vbios related issues. Proposed umr patch:
https://patchwork.freedesktop.org/patch/433297/
- 16bpc fixed point format support
IGT test:
https://lists.freedesktop.org/archives/igt-dev/2021-May/031507.html
Proposed Vulkan patch:
a25d480207
- Add a new GEM flag which is only used internally in the kernel driver. Userspace
is not allowed to set it.
drm:
- 16bpc fixed point format fourcc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602214009.4553-1-alexander.deucher@amd.com
On ADL_P the power well->PHY mapping doesn't follow the mapping on previous
platforms, fix this up.
While at it remove the redundant dev_priv param from
icl_tc_phy_aux_ch().
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com
An async-put on an encoder specific power domain (for instance the AUX
PW domain) may be pending when removing the encoder. Make sure any such
async-puts are complete while the corresponding encoder is still in place
since at least AUX power wells require this to do a power well->PHY
lookup.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-1-imre.deak@intel.com
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vboxvideo/modesetting.c:11: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/modesetting.c:54: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/modesetting.c:87: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-27-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vboxvideo/hgsmi_base.c:12: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:42: warning: expecting prototype for Notify the host of HGSMI(). Prototype was for hgsmi_send_caps_info() instead
drivers/gpu/drm/vboxvideo/hgsmi_base.c:74: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:102: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:174: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-26-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/exynos/exynos_drm_ipp.c:105: warning: expecting prototype for exynos_drm_ipp_ioctl_get_res_ioctl(). Prototype was for exynos_drm_ipp_get_res_ioctl() instead
drivers/gpu/drm/exynos/exynos_drm_ipp.c:153: warning: expecting prototype for exynos_drm_ipp_ioctl_get_caps(). Prototype was for exynos_drm_ipp_get_caps_ioctl() instead
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-25-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-21-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_tt.c:398: warning: Function parameter or member 'num_pages' not described in 'ttm_tt_mgr_init'
drivers/gpu/drm/ttm/ttm_tt.c:398: warning: Function parameter or member 'num_dma32_pages' not described in 'ttm_tt_mgr_init'
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-20-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:50:1: warning: no previous prototype for ‘tu102_mc_intr_unarm’ [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:62:1: warning: no previous prototype for ‘tu102_mc_intr_rearm’ [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:74:1: warning: no previous prototype for ‘tu102_mc_intr_mask’ [-Wmissing-prototypes]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-16-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hqvdp.c:796: warning: expecting prototype for sti_vdp_vtg_cb(). Prototype was for sti_hqvdp_vtg_cb() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-9-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_tvout.c:166: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_color_order() instead
drivers/gpu/drm/sti/sti_tvout.c:187: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_clip_mode() instead
drivers/gpu/drm/sti/sti_tvout.c:203: warning: expecting prototype for Set the rounded value of a VIP(). Prototype was for tvout_vip_set_rnd() instead
drivers/gpu/drm/sti/sti_tvout.c:223: warning: expecting prototype for Select the VIP input(). Prototype was for tvout_vip_set_sel_input() instead
drivers/gpu/drm/sti/sti_tvout.c:258: warning: expecting prototype for Select the input video signed or unsigned(). Prototype was for tvout_vip_set_in_vid_fmt() instead
drivers/gpu/drm/sti/sti_tvout.c:274: warning: expecting prototype for Set preformatter matrix(). Prototype was for tvout_preformatter_set_matrix() instead
drivers/gpu/drm/sti/sti_tvout.c:299: warning: expecting prototype for Start VIP block for DVO output(). Prototype was for tvout_dvo_start() instead
drivers/gpu/drm/sti/sti_tvout.c:353: warning: expecting prototype for Start VIP block for HDMI output(). Prototype was for tvout_hdmi_start() instead
drivers/gpu/drm/sti/sti_tvout.c:402: warning: expecting prototype for Start HDF VIP and HD DAC(). Prototype was for tvout_hda_start() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hda.c:283: warning: expecting prototype for Search for a video mode in the supported modes table(). Prototype was for hda_get_mode_idx() instead
drivers/gpu/drm/sti/sti_hda.c:301: warning: expecting prototype for Enable the HD DACS(). Prototype was for hda_enable_hd_dacs() instead
drivers/gpu/drm/sti/sti_hda.c:383: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-7-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:77: warning: expecting prototype for Start hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_start() instead
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:187: warning: expecting prototype for Stop hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_stop() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-6-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'clk' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'regs' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'vblank_cb' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'vblank_cb_data' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'fifo_size' not described in 'mtk_disp_rdma'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'clk' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'regs' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'vblank_cb' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'vblank_cb_data' not described in 'mtk_disp_ovl'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-4-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'clk' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'regs' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'data' not described in 'mtk_disp_gamma'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-3-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'clk' not described in 'mtk_disp_color'
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'regs' not described in 'mtk_disp_color'
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_color'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-2-lee.jones@linaro.org
When LLCC support is in a loadable module, the adreno support
cannot be built-in:
aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_gpu_init':
a6xx_gpu.c:(.text+0xe0): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xe0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0xec): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_destroy':
a6xx_gpu.c:(.text+0x274): undefined reference to `llcc_slice_putd'
a6xx_gpu.c:(.text+0x274): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_putd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0x27c): undefined reference to `llcc_slice_putd'
Add a Kconfig dependency that disallows the broken configuration
but allows all working ones.
Fixes: 474dadb8b0 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210103140407.3917405-1-arnd@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-3-keescook@chromium.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vgem/vgem_drv.c:47: warning: expecting prototype for This is vgem, a (non-hardware(). Prototype was for DRIVER_NAME() instead
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526084726.552052-31-lee.jones@linaro.org
Move struct intel_dmc from i915_drv.h to intel_dmc.h.
v2: Add includes along with moving the struct.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com
We check for dmc_payload being there at various points in the driver.
Replace it with the helper.
v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com
Use new format of debug messages across intel_csr.
While at it, change some function definitions which now
need dev_priv for drm_err and drm_info etc.
v2: use container_of() (Jani)
v3: Indentation fixes. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-2-anusha.srivatsa@intel.com
This allows to tie the log message to a specific DRM device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Releasing pinned BOs is illegal now. UVD 6 was missing from:
commit 2f40801dc5 ("drm/amdgpu: make sure we unpin the UVD BO")
Fixes: 2f40801dc5 ("drm/amdgpu: make sure we unpin the UVD BO")
Cc: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When some tools performing psp mailbox attack, the readback value
of register can be a random value which may break psp.
[How]
Use a psp wptr cache machanism to aovid the change made by attack.
v2: unify change and add detailed reason
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On resume we perform DMUB hw_init which allocates memory:
dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc
That results in memory leak in suspend/resume scenarios.
[How]
Allocate memory for the DC wrapper to DMUB only if it was not
allocated before.
No need to reallocate it on suspend/resume.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On QUERY2 IOCTL don't query counts of correctable
and uncorrectable errors, since when RAS is
enabled and supported on Vega20 server boards,
this takes insurmountably long time, in O(n^3),
which slows the system down to the point of it
being unusable when we have GUI up.
Fixes: ae363a212b ("drm/amdgpu: Add a new flag to AMDGPU_CTX_OP_QUERY_STATE2")
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few weeks ago, we saw a two cursor issue in a ChromeOS system. We
fixed it in the commit:
drm/amd/display: Fix two cursor duplication when using overlay
(read the commit message for more details)
After this change, we noticed that some IGT subtests related to
kms_plane and kms_plane_scaling started to fail. After investigating
this issue, we noticed that all subtests that fail have a primary plane
covering the overlay plane, which is currently rejected by amdgpu dm.
Fail those IGT tests highlight that our verification was too broad and
compromises the overlay usage in our drive. This patch fixes this issue
by ensuring that we only reject commits where the primary plane is not
fully covered by the overlay when the cursor hardware is enabled. With
this fix, all IGT tests start to pass again, which means our overlay
support works as expected.
Cc: Tianci.Yin <tianci.yin@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Choi <nicholas.choi@amd.com>
Cc: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mark Yacoub <markyacoub@google.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. eliminate potential array index out of bounds.
2. return meaningful value for failure.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop DC initialization when DCN is harvested in VBIOS. The way
doesn't affect virtual display ip initialization.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FS video support regressed GPU scaling and the scaled buffer ends up
stuck in the top left of the screen at native size - full, aspect,
center scaling modes do not function.
This is because decide_crtc_timing_for_drm_display_mode() does not
get called when scaling is enabled.
[How]
Split recalculate timing and scaling into two different flags.
We don't want to call drm_mode_set_crtcinfo() for scaling, but we
do want to call it for FS video.
Optimize and move preferred_refresh calculation next to
decide_crtc_timing_for_drm_display_mode() like it used to be since
that's not used for FS video.
We don't need to copy over the VIC or polarity in the case of FS video
modes because those don't change.
Fixes: 6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bandwidth calculations are triggered for non zero streams, and
in case of 0 streams, these calculations were skipped with
pstate status not being updated.
[How]
As the pstate status is applicable for non zero streams, check
added for allowing 0 streams inline with dcn internal bandwidth
validations.
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Embed a struct ttm_buffer_object into the i915 gem object, making sure
we alias the gem object part. It's a bit unfortunate that the
struct ttm_buffer_ojbect embeds a gem object since we otherwise could
make the TTM part private to the TTM backend, and use the usual
i915 gem object for the other backends.
To make this a bit more storage efficient for the other backends,
we'd have to use a pointer for the gem object which would require
a lot of changes in the driver. We postpone that for later.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-3-thomas.hellstrom@linux.intel.com
Temporarily remove the buddy allocator and related selftests
and hook up the TTM range manager for i915 regions.
Also modify the mock region selftests somewhat to account for a
fragmenting manager.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-2-thomas.hellstrom@linux.intel.com
In case of error, the function live_context() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33c46ef24cd547d0ad21dc106441491a@intel.com
[tursulin: Wrap commit text, fix Fixes: tag.]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 8f4caef8d5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In case of error, the function live_context() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33c46ef24cd547d0ad21dc106441491a@intel.com
[tursulin: Wrap commit text, fix Fixes: tag.]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528100403.21548-1-yuehaibing@huawei.com
When we want to decouble resource management from buffer management we need to
be able to handle resources separately.
Add a resource pointer and rename bo->mem so that all code needs to
change to access the pointer instead.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-4-christian.koenig@amd.com
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add AMDGPU_INFO_VBIOS_INFO subquery id for detailed vbios info.
Provides a way for the user application to get the VBIOS
information without having to parse the binary.
It is useful for the user to be able to display in a simple way the VBIOS
version in their system if they happen to encounter an issue.
V2:
Use numeric serial.
Parse and expose vbios version string.
V3:
Remove redundant data in drm_amdgpu_info_vbios struct.
V4:
64 bit alignment in drm_amdgpu_info_vbios.
v5: squash together all the reverts, etc. (Alex)
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For 16bpc display support.
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes gcc '-Wunused-function' warning:
‘update_dsc_caps’ and ‘apply_dsc_policy_for_stream’ are only used
if 'CONFIG_DRM_AMD_DC_DCN' is defined,
however, it's defined even if 'CONFIG_DRM_AMD_DC_DCN' is not defined.
Thus gcc will report following warning
if 'CONFIG_DRM_AMD_DC_DCN' is not defined:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5572:13: warning:
‘apply_dsc_policy_for_stream’ defined but not used [-Wunused-function]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5556:13: warning:
‘update_dsc_caps’ defined but not used [-Wunused-function]
Thus move the definition of ‘update_dsc_caps’ and
‘apply_dsc_policy_for_stream’ inside define macro to fix it.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Local variable 'i' and 'j' will be initialized in the for loop, so
remove the redundant initialization.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
define a new macro for_each_new_plane_in_state_reverse to replace
for_each_oldnew_plane_in_state_reverse, so that the unused variable
'old_plane_state' can be removed.
Fix gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10066:26: warning:
variable ‘old_plane_state’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function amdgpu_uvd_cs_msg(), every branch in the switch
statement will have a return, so the code below the switch statement
will not be executed.
Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:845 amdgpu_uvd_cs_msg() warn:
ignoring unreachable code.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows to tie the log message to a specific DRM device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
table_freed will be always true when mapping a memory with size
bigger than 2MB. The problem is page table's entries are always
existed, but existing mapping depends on page talbe's bo, so
using a check of page table's bo existed will resolve the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the memset() and snprintf() is not necessary.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable smart shift on dGPU if it is part of HG system and
the platform supports ATCS method to handle power shift.
V2: avoid psc updates in baco enter and exit (Lijo)
fix alignment (Shashank)
V3: rebased on unified ATCS handling. (Alex)
V4: check for return value and warn on failed update (Shashank)
return 0 if device does not support smart shift. (Lizo)
V5: rebased on ATPX/ATCS structures global (Alex)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't flush gart changes after recovering each BO instead
do it after recovering all the BOs. Flishing gart also needed
for amdgpu_ttm_alloc_gart().
v4: use containerof to retrieve adev struct.
v3: rename amdgpu_gart_tlb_flush() -> amdgpu_gart_invalidate_tlb().
v2: abstract out gart tlb flushing logic to amdgpu_gart.c
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
