lib/zclient.h was missing from #includes so compiler
was rightly complaining about undefined structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since control packets may be dropped by ttl check, the counter
operation should be put after all check including ttl check.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Renamed frr-igmp.yang to frr-gmp.yang, igmp to gmp container.
to support IGMP and MLD protocol.
frr-gmp.yang, created a list of address family under mgmd
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
This causes confusing/annoying log messages at startup otherwise:
`YANG model "ietf-inet-types@*" "*@*"not embedded, trying external file`
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The test case test_PIM_hello_tx_rx_p1 is failing randomly because
sometimes the hello packet is received and sometimes not received while getting
the stats data.
When the hello packet is received HelloRx gets incremented to 1 and then
shutdown of the interface is executed which resets the stats to 0
and again when "no shutdown" of the interface is done, the stats get incremented to 1.
The test case checks after "no shutdown" of the interface whether the stats is incremented
but in this case although the stats got incremented the before and after value is same.
Hence the test case failed.
Adding correct expectations in the test case.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Update ospfd and ospf6d to send opaque route attributes to
zebra. Those attributes are stored in the RIB and can be viewed
using the "show ip[v6] route" commands (other than that, they are
completely ignored by zebra).
Example:
```
debian# show ip route 192.168.1.0/24
Routing entry for 192.168.1.0/24
Known via "ospf", distance 110, metric 20, best
Last update 01:57:08 ago
* 10.0.1.2, via eth-rt2, weight 1
OSPF path type : External-2
OSPF tag : 0
debian#
debian# show ip route 192.168.1.0/24 json
{
"192.168.1.0\/24":[
{
"prefix":"192.168.1.0\/24",
"prefixLen":24,
"protocol":"ospf",
"vrfId":0,
"vrfName":"default",
"selected":true,
[snip]
"ospfPathType":"External-2",
"ospfTag":"0"
}
]
}
```
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
'show bgp ... neighbor [routes|received-routes]' both incorrectly
used a json key of 'advertisedRoutes'.
This corrects the key to be 'receivedRoutes' for commands where
the displayed routes were received, not advertised.
before:
unet> r3 show ip bgp neigh 10.2.30.2 received-routes json | include Routes
"advertisedRoutes":{
after:
ub18# show ip bgp neighbors enp1s0 received-routes json | include Routes
"receivedRoutes":{
ub18# show ip bgp neighbors enp1s0 advertised-routes json | include Routes
"advertisedRoutes":{
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Instead of referring to the draft of IP Prefix Advertisement in
Ethernet VPN let's point to the recently published RFC9136.
Signed-off-by: Marlin Cremers <marlin@cbws.nl>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
checkpatch.pl has a hardcoded list of printf extensions supported... by
the Linux kernel. This happens to have covered the ones we have in FRR
so far, but `%pPA` isn't on the list and others may not be either.
Since we have the frr-format GCC plugin (and CI runs that on Debian 11)
we don't really need these checks in checkpatch.pl.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Topology:
IXIA-----(ens192)FRR(ens224)------iXIA
Configuration:
1. Create 8 sub-interfaces on ens192 under Default VRF and configure 8
EBGP session between FRR and IXIA.
2. Create 1000 sub-interfaces on ens224 under Default VRF and configure
1000 EBGP session between FRR and IXIA.
3. 2M prefixes distributed from Left side Ixia each with 8 ECMP path.
4. So in total, there are 2M prefixes * 8 ECMP = 16M prefixes entries
in RIB and FIB.
Issue:
Shut ens192 and ens224, this is taking 1hr 15 mins to clean up the routes.
Root Cause:
In the case of route deletion, if the particular route node is having
nht count = 0, we are going to the parent and doing nht evaluation,
which is not needed.
Fix:
If the deleted the route node is having nht count > 0, then do a nht
evaluation on the parent node.
Shut ens192 and ens224, it is taking 1 min to clean up the routes
with the fix.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Track what conditionals apply when a DEFPY is encountered, and stack
them around the autogenerated clippy wrapper. Otherwise conditional
DEFPYs result in undefined function warnings.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
