Upon frr restart vtysh replays pim bfd configuration
cli before pim sm command, this results in failure
of pim bfd config on the VIF as it is not pim enabled yet.
Inside pim bfd configuration, call to create PIM vif
handler if it is not created yet.
no ip pim bfd, if pim is not enabled display warning and return.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This patch does two things:
1) Converts the pim_ifp->ifchannel_list to a pim_ifp->ifchannel_rb
2) Removes the hashing to use the RB RB_FIND instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the redundant information in pim_ifp->pim_ifchannel_list
just call it pim_ifp->ifchannel_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim->ifchannel_list can be duplicated by iterating
over each vrf and then over each pim_ifp->pim_ifchannel_list
Since list handling is taking allot of time at scale
convert over to using this value.
Additionally clean up pim_cmd.c to have helper functions
to handle the actual encoding of data for output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
'show ip mroute vrf all count' crashes currently
This commit fixes that issue
Ticket: CM-17052
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In show ip pim interface and show ip pim interface <intf>
display State "down" pim enabled interfaces.
Ticket:CM-16809
Reviewed By:CCR-6398
Testing Done:
show ip pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
br1 up 2.0.1.1 0 local 0 0
lo up 6.0.0.1 0 local 0 0
pimreg up 0.0.0.0 0 local 0 0
swp1 down 6.0.1.1 0 local 0 0
swp2 up 6.0.2.1 1 local 0 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Move the upstream_list, hash and wheel into 'struct pim_instance'
Remove all pimg to pim in pim_upstream
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A bunch of functions had return values that were never
checked for ( and not needed ) and opposite return values
for proper calling function boolean logic.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the socket fd to be owned by the pimg pointer as
well as the counters associated with the fd. This will
allow us to future proof our code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
All PIM Neighbors for a given pim interface is registered with
BFD.
Upon receiving BFD status down event, PIM Neighbor with BFD info is deleted.
Add pim bfd configuraiton (CLI) per interface, '[no] ip pim bfd'
Testing Done:
Configure BFD under PIM interface on all neighbor routers,
check bfd sessions up, remote end unconfigure BFD, results in BFD session down.
Previous state was UP to New state DOWN, results in PIM neighbor delete behind
that particular pim interface.
Pim-smoke Results:
Ran 94 tests in 7409.680s
FAILED (SKIP=8, failures=2)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
If frr.conf file has pim hello option setup prior to pim sm under an interface, upon frr start/restart hello option cli replayed prior to sm command
from vtysh. Added a code in pim hello option cli handler to create pim vif if it does not exist.
Testing Done:
configure pim hello options before pim sm in frr.conf file and restart frr
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When we have no normal mroutes and only static mroutes
there exists a code path where we attempted to dereference
c_oil when we were showing static mroutes. Looks like
a cut-n-paste error, we should be using s_route->c_oil there
Ticket: CM-15013
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ip pim ecmp and ip pim ecmp rebalance configuration CLIs were
not adding to Quagga.confg or running configuration.
Added both the configuration write in Config write handler.
Testing Done: Execute configuration cli and verified running config
and Quagga.conf file containing both configuration.
03# show running-config
Building configuration...
Current configuration:
!
ip multicast-routing
ip pim rp 6.0.0.9 230.0.0.0/16
ip pim join-prune-interval 61
ip pim ecmp
ip pim ecmp rebalance
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When we uplifted the cli from old -> new, I did not properly
handle the switch from <1-3> to (1-3) for number ranges.
Also fix some minor variable renaming that happened?
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This was causing a crash when no group address was passed
because a garbage pointer valuse was used. It also was ignoring
the group address when passing one.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Execute ip igmp version 3 under swp interface,
verified show running displayed 'ip igmp' configuration.
Continuous sending group membership, performed 'no ip igmp'
and verified, group membership flushed. Performed
'ip igmp version 3', verified 'show ip igmp groups'
displaying igmp membership re-populated.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In this patch, PIM nexthop tracking uses locally populated nexthop cached list
to determine ECMP based nexthop (w/ ECMP knob enabled), otherwise picks
the first nexthop as RPF.
Introduced '[no] ip pim ecmp' command to enable/disable PIM ECMP knob.
By default, PIM ECMP is disabled.
Intorudced '[no] ip pim ecmp rebalance' command to provide existing mcache
entry to switch new path based on hash chosen path.
Introduced, show command to display pim registered addresses and respective nexthops.
Introuduce, show command to find nexthop and out interface for (S,G) or (RP,G).
Re-Register an address with nexthop when Interface UP event received,
to ensure the PIM nexthop cache is updated (being PIM enabled).
During PIM neighbor UP, traverse all RPs and Upstreams nexthop and determine, if
any of nexthop's IPv4 address changes/resolves due to neigbor UP event.
Testing Done: Run various LHR, RP and FHR related cases to resolve RPF using
nexthop cache with ECMP knob disabled, performed interface/PIM neighbor flap events.
Executed pim-smoke with knob disabled.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
(cherry picked from commit cba4448178)
To the 'ip pim spt-switchover infinity-and-beyond' command
add 'prefix-list <PLIST>'. To the command.
Use this as the basis to deny (Not immediate switchover)
or permit (Immediate switchover), based upon matching
the group address and the prefix-list.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In this patch, PIM nexthop tracking uses locally populated nexthop cached list
to determine ECMP based nexthop (w/ ECMP knob enabled), otherwise picks
the first nexthop as RPF.
Introduced '[no] ip pim ecmp' command to enable/disable PIM ECMP knob.
By default, PIM ECMP is disabled.
Intorudced '[no] ip pim ecmp rebalance' command to provide existing mcache
entry to switch new path based on hash chosen path.
Introduced, show command to display pim registered addresses and respective nexthops.
Introuduce, show command to find nexthop and out interface for (S,G) or (RP,G).
Re-Register an address with nexthop when Interface UP event received,
to ensure the PIM nexthop cache is updated (being PIM enabled).
During PIM neighbor UP, traverse all RPs and Upstreams nexthop and determine, if
any of nexthop's IPv4 address changes/resolves due to neigbor UP event.
Testing Done: Run various LHR, RP and FHR related cases to resolve RPF using
nexthop cache with ECMP knob disabled, performed interface/PIM neighbor flap events.
Executed pim-smoke with knob disabled.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add code to properly receive v6 addresses up from zebra and to
properly place them into our interface secondary address list.
Additionally cleanup some code in pim_cmd.c that was broken
by these changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code change adds the ability to specify that
we should be able to work with older versions
of PIM.
In future commits we will actually use this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Interface type has been replaced with the SSM range config. And SSM
groups can now co-exists with ASM groups. I have left the pim ssm
per-interface cli control hidden. It now enables pim-sm with a warning.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done: pim-smoke
SSM groups (232/8 or user configured SSM range) can exist in the same
multicast network as ASM groups. For such groups all RPT related state
machine operations have to be skipped as defined by section 4.8 of
RFC4601 -
1. Source registration is skipped for SSM groups. For SSM groups mroute
is setup on the FHR when a new multicast flow is rxed; however source
registration (i.e. pimreg join) is skipped. This will let the ASIC black
hole the traffic till a valid OIL is added to the mroute.
2. (*,G) IGMP registrations are ignored for SSM groups.
Sample output:
=============
fhr# sh ip pim group-type
SSM group range : 232.0.0.0/8
fhr# sh ip pim group-type 232.1.1.1
Group type: SSM
fhr# sh ip pim group-type 239.1.1.1
Group type: ASM
fhr#
Sample config:
=============
fhr(config)# ip pim ssm prefix-list ssm-ranges
fhr(config)#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done:
1. SSM/ASM source-registration/igmp-joins.
2. On the fly multicast group type changes.
3. pim-smoke.
When we get a SGrpt Prune embedded in the *,G Join,
Display the created ifchannel as being SGRpt state.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Changed the state field in the "sh ip pim upstream" output to include
register and join state info as a comma separated value. Register info
is supressed if reg-state=NoInfo.
Sample output:
=============
root@fhr:/home/cumulus# net show pim upstream
Iif Source Group State Uptime JoinTimer
RSTimer KATimer RefCnt
swp1 33.1.1.1 239.1.1.2 J,RegP 00:00:18 --:--:--
00:00:44 00:03:24 2
root@fhr:/home/cumulus#
root@rp:/home/cumulus# net show pim upstream
Iif Source Group State Uptime JoinTimer
RSTimer KATimer RefCnt
lo * 239.1.1.2 J 00:02:08 00:00:52
--:--:-- --:--:-- 1
swp1 33.1.1.1 239.1.1.2 J 00:00:16 00:00:11
--:--:-- 00:03:26 1
root@rp:/home/cumulus#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: pim-smoke
With the separation of register-state and upstream-join-state we no
longer need an enumeration that covers both states. This commit includes
the following -
1. Defined new enumeration for reg state (this 1:1 with RFC4601).
2. Dropped JOIN_PENDING enum value from upstream join state. RFC4601
only define two values NOT_JOINED and JOINED for this state.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: Verified register setup manually and ran pim-smoke
On the FHR upstream-join-state is not particularly relevant as we
don't need to send upstream JPs for the SG. So that field was being
overloaded with the register-state. However some of the events that
triggered changes to the JoinDesired macro were accidentally overwriting
the state with join info (instead of treating it as register info)
confusing the register state machine.
To make the PIM RFC macros' implemention simple I have separated out
the register-state. And upstream->state now solely describes the
upstream-join-state independent of the role of the PIM router.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: verified pim-register state-machine with separate and
combined FHR/RP routers. Also ran pim-smoke.
The 'show ip pim state' command was not
working quite correctly from when
we moved over to the new vtysh-grammar.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Automatically turn on pim if the daemon is turned on.
Hide the 'ip multicast-routing' command
Disable the 'no ip multicast-routing' command
Do not display the 'ip multicast-routing' command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you enter these commands, under an interface:
ip igmp version ...
ip igmp query-interval ...
ip igmp query-max-response-time ...
ip igmp query-max-response-time-dsec ...
These commands will now just turn on igmp for the
interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability for PIM to send Join/Prunes as an
aggregated message instead of individual messages
for each S,G.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleanup the in_ifname and out_ifname buffers
to be large enough to hold the actual interface
names.
Additionally move the common variables to be defined
once, instead of inside of multiple for loops
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
PIM was handling vif creation deletion poorly
for interface down and up events. Fix this
issue by keeping track of which vif index'es
we have issued and allow the wholes to be
filled in.
Ticket: CM-14556
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit does these three things:
1) Add code to 'show ip pim state' to show where OIF's got their
decision to include that interface
2) Add code in pim_mroute_[add|del] to display what we think we are
adding to the kernel
3) Add code to properly track where we got the incoming request from and
to appropriately not remove a OIL if we have state still
Ticket: CM-14034
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Start the abstraction of the zclient data structure out from a
global variable for the entire program to a global variable
to the pim_zebra.c file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were adding the 'ip msdp ...' command to
the parser 2x. Some new code added to the
parser apparently catches this for us now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Mixing well-known and variable property names makes the output difficult
to parse. so wrapped variable-keyed dicts with well-known property
names (such as "oil") in the following outputs -
"show ip mroute json"
"show ip msdp mesh-group json"
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There exists situations where we have noted that
we need to rescan but have missed the window
of opportunity to actually redo the scan
so for the moment allow the S,G 30 second
scanner notice the missed opportunity and
fix it. We'll remove this later.
Ticket: CM-13988
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify pim_usptream_new to auto create the pim
channel oil. Why? Because there exists situations
where we have upstream state and we are attempting
to set the inherited_olist on it and we have
not created the channel oil yet. When that
happens we end up with mroutes that are
being meanies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging is turned on for 'debug mroute' we
are unable to tell when a mroute has been added
or deleted from the mrib. Notice when we
do it and who called it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make the 'ip igmp query-max-response-time' command
take input in deci-seconds and make the
'ip igmp query-max-response-time-dsec' command hidden.
Ticket:CM-13786
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Was failing with a vague error -
"Source set failed"
Changed to used the error string (used by the rest of the commands) -
"Pim not enabled on this interface"
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Anycast rp requires multiple ip addresses on the lo. If PIM is used in
an unnumbered BGP network it picks one of the lo addresses as the
pim-primary for the swp interfaces. But if the anycast IP is picked up
by both sides pim nbr will never converge. So a static "use-source" config
is provided to allow the administrator to force the the hello source to the
unique IP address.
Sample output:
=============
dell-s6000-04(config-if)# do show running-config pimd
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
interface lo
ip pim sm
ip pim use-source 100.1.1.5
!
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo
Interface : lo
State : up
Use Source : 100.1.1.5
Address : 100.1.1.5 (primary)
100.1.1.100
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo json
{
"lo":{
"name":"lo",
"state":"up",
"address":"100.1.1.5",
"index":1,
"lanDelayEnabled":true,
"useSource":"100.1.1.5",
"secondaryAddressList":[
"100.1.1.100"
],
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'ip pim packets <1-100>' command.
Allows you to control the number of packets read in before
giving control back to another part of the process.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Anycast requires that the lo interface be associated with multiple
addresses. One is the anycast IP address (which is the same on all RPs
participating in RP redundancy) and the second is the unique IP address
that will be used as the router id by routing protocols.
To accomodate that we maintain a list of secondary addresses per-pim iface
and allow any of them to be the RP address. This lets the I_am_RP macro
succeed on anycast RPs.
Note that the support is limited i.e. we don't actually advertise a
secondary list to the neighbors. This is assuming the anycast IP will never
be used as a router id i.e. will never be an RPF neighbor.
Sample output:
==============
dell-s6000-04# sh ip pim interface lo
Interface : lo
State : up
Address : 100.1.1.1 (primary)
100.1.1.2
100.1.1.3
100.1.2.1
>>>>>>> SNIP >>>>>>>>>>>>>>>
dell-s6000-04# sh ip pim interface lo json
{
"lo":{
"name":"lo",
"state":"up",
"address":"100.1.1.1",
"index":1,
"lanDelayEnabled":true,
"secondaryAddressList":[
"100.1.1.2",
"100.1.1.3",
"100.1.2.1"
],
>>>>>>> SNIP >>>>>>>>>>>>>>>
dell-s6000-04#sh ip pim rp-info
RP address group/prefix-list OIF I am RP
100.1.2.1 224.0.0.0/4 lo yes
dell-s6000-04#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debugs are extremely expensive currently. Let's
store 'struct prefix_sg sg' string format in
the ifchannel, upstream and msdp_sa structures.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. This is needed to layout the MSDP macros for determining what SAs are
originated by a MSDP speaker.
2. We no longer let the kat timer expire on an active flow. Activity
counters/lastuse is polled via a wheel for every SG entry. If new
activity is detected the keepalive timer is started and SPT bit set.
A SRC_STREAM reference is also created for the entry if one doesn't
already exist.
3. If KAT actually expires it means the flow is no longer active. At
this point we stop advertising the SA to MSDP peers. We also pull
the SRC_STREAM reference (deleting the entry if there are no other
references).
PS: Checking counters on KAT expiry will come in the next change.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the 'ip pim register-suppress-time ...' command.
Remove the 'no ip pim rp keep-al...' command as
that the register suppress set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a 'no ip pim sm' for an interface
that has both pim and igmp on it, only turn
off pim.
Ticket: CM-12985
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Add support for mesh-group based configuration that is easy to apply
via automation. The older per-peer configuartion is temporarily hidden
and will be cleaned up later.
Sample config -
ip msdp mesh-group cumulus source 100.1.1.4
ip msdp mesh-group cumulus member 100.1.1.5
ip msdp mesh-group cumulus member 100.1.1.6
2. Added support for detail peer and sa-cache displays. Along with
filter keys.
3. Add json output for all the msdp displays.
With this commit basic support for anycast-RP with MSDP (in numbered
network is complete). Unnumbered support will be added separately.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added a new MSDP source reference flag for creating (S,G) entries
based on the SA-cache. The RFC recommends treating as SA like rxing
a (S, G) join (which is a bit different then treating like a traffic
stream).
2. SA-SPT is only setup if we are RP for the group and a corresponding
(*,G) exists with a non-empty OIL.
3. When an SA is moved we need to let the SPT live if it is active (this
change will come in a subsequent CL).
Testing done:
1. SA first; SPT setup whenever (*, G) comes around.
2. (*, G) first. As soon as SA is added SPT is setup.
3. (*, G) del with valid SA entries around.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we have multiple incoming joins for
a single group on a interface, we need to
allow proper output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you add to the json by grp, if you have multiple
ifchannels for that group, on the the first one will
be displayed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes -
1. Maintaining SA cache with local and remote entries.
2. Local SA entries - there are two cases where we pick up these -
- We are RP and got a source-register from the FHR.
- We are RP and FHR and learnt a new directly connected source on a
DR interface.
3. Local entries are pushed to peers immediately on addition and
periodically. An immediate push is also done when peer session is
established.
4. Remote SA entries - from other peers in the mesh group and passed
peer-RPF checks.
5. Remote entries are aged out. No other way to del them
currently. In the future we may add a knob to flush entries on
peer-down.
Testing done -
Misc topologies with CL routers plus basic interop with another vendor (
we can process their SA updates and they ours).
Sample output -
root@rp:~# vtysh -c "show ip msdp sa"
Source Group RP Uptime
33.1.1.1 239.1.1.2 local 00:02:34
33.1.1.1 239.1.1.3 local 00:02:19
44.1.1.1 239.1.1.4 100.1.3.1 00:01:12
44.1.1.1 239.1.1.5 100.1.3.1 00:00:55
root@rp:~#
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fix handles two issues:
1) Searching entire vrf_iflist to get per interface pim_ifchannel_list
2) Display of ifchannel information in pim not being ordered correctly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes the following changes -
1. Support for MSDP peer DB (hash and sorted list).
2. Support for the following timers - keepalive, connect-retry, hold.
3. TCP session management (lower-ip is active, higher-ip is passive).
4. MSDP KA packet rx/tx.
5. Limited temporary config (will be replaced with the more automation
friendly RP-set).
Testing done -
Peer bringup/deletion (including interop with another vendor)
Sample out -
root@dell-s6000-04:~# sudo vtysh -c "show ip msdp peer"
Peer Local Mesh-group State Uptime
100.1.1.1 100.1.2.1 default established 00:07:27
100.1.3.1 100.1.2.1 default established 00:31:50
root@dell-s6000-04:~#
Coming soon -
1. part-2: SA cache management.
2. part-3: SPT setup using source in SA cache.
3. part-4: CLI cleanup.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
The test commands are not being maintained and
are not out of date with the rest of the system. There
are better ways to test code and in addition these
commands if entered by a user could seriously impact
their running system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cache the last time we looked up the nexthop for this particular
address. Store time to usec accuracy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This cleans up the following so that they always collect the data to
display in json structures and then either dumps the json output or
traverses it to produce the non-json output.
show ip pim local-membership
show ip pim interface
When entering debug commands under 'conf t' mode
allow the debugs to be saved for future fun and
adventure.
Ticket: CM-13213
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When looking up the channel_oil use a hash
to find it. Keep the list around for quick
walks of the channel oils.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Pim sometimes needs the upstream rpf lookup to
only take into account if we have a nbr out
the selected interface or not. Move
the code for this to a better spot so
we can make a more intelligent decision
here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
mrib_nexthop_addr and rpf_addr should be 'struct prefix'
so that we can safely handle unnumbered data from a nexthop
lookup in zebra
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
List the RP information we have configured.
Fix bug where we were not properly initializing some code
Ticket: CM-12617
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I tried to be smart and skirt around rpf lookup if I knew
the incoming interface. This turns out to be not necessarily
a good thing because we can easily have asymetrical routing.
This fix removes the attempt to cache the ifp we received
the incoming packet on and just lets the lookup work like
it should.
Additionally it removes the weird hardcoding of the rpf
interface from the register stuff.
Ticket: CM-12530
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
reb
Just pass in the actual state to allow us to translate
the state to a string even if we don't have a upstream.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there is allot of IGMP activity for the
kernel upcall that we are ignoring, just
ignore it for the moment as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify multiple rp commands.
'ip pim rp A.B.C.D' -> translates to 'ip pim rp A.G.C.D 224.0.0.0/24'
ip pim rp A.B.C.D A.B.C.D/M
First is the rp, second is the group with mask.
Groups and masks cannot be over each other except 224.0.0.0/24 which
is the fallback if used.
Ticket: CM-7860
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refactor the qpim_rp into pim_rp.c so that the global data
is protected. This will allow us to easily add the group
ranges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix the struct prefix to be an actual struct prefix_sg.
This cleans up a bunch of code to make it look nicer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a *,G report is sent, the RPT and WC bits
are set as well as the source is the RP address
for the group.
If this routers idea of the RP for this group is
different than the idea of the RP from the sender
than that particular *,G can be dropped.
Ticket: CM-12031
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert ifchannel to use a prefix to store (s,g) information.
Additionally create pim_str_sg_dump function to output
data when using debugs.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track whether or not if a mroute has been installed
or not. If not don't display information about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct static_route' data structure duplicated a
decent bit of what is the in the struct channel_oil.
Refactor. This will set us up for further cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the 'show ip pim upstream' command to
show the expected incoming interface for
the source.
Ticket: CM-11220
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we create the pim_ifp we need to see if this
interface allows us to elect our selves the RP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the kernel sends a NOCACHE message to
pim we were looking up the interface to
use for the incoming multicast packet
based upon the source. No need to do
that trust that the kernel has properly
identified it and use that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zebra.h pulls in config.h, which results in fiddling with things like
__FILE_OFFSET_BITS. It must always be included first, in order to set
flags that influence the compiler via <features.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 821df2cf18e5978cc7ab532a8695444380d08270)
The linux kernel wants a pimreg vif device. The pimd
code wants a 'struct interface *' for anything it works
with. Since the pimreg vif device is not a real linux
device that zebra knows about. Cheat by creating
a pimreg interface pointer and setup the code to
properly be able to handle the registration of the vif
device.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit does two things:
(A) Sets up #defines for the pimreg to be used in pim_mroute.c
(B) Moves add_oif into pim_oil.c where it belongs
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add Source type for (S,G) mroute. This will allow us to know that
a (S,G) route came from an actual Source( ie the kernel called us
back with information about a multicast packet it received with
no mroute for it ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the process of creating the pimreg vif device so that
we can get the callbacks from the kernel with the multicast packets
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify the static Rendevous point
as well as specifying that an interface is Sparse Mode.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
