The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Both pim_ecmp_nexthop_lookup and pim_ecmp_fib_lookup_if_vif_index
pass the address in 2 times. Make function calls consistent
and just pass in the src once.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing nexthop lookups do not permanently allocate
memory in zebra and pim to track the nexthop specified
on the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We know the vrf that we are in when we need to initiate a
rescan of the rpf cache. So pass it in and use that information.
This should help the rescan at scale with several vrf's cutting
out a lot of unnecessary work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'ip pim use-source ...' command returns a hard
success/failure. Allow it to return a soft-failure
for when we re-enter the same line.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When PIM handles some MSDP commands, a repeated command
was causing a CMD_WARNING_CONFIG_FAILED. This should
be a CMD_WARNING. Fix the code to allow vtysh to handle
this appropriately.
Ticket: CM-19053
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we ask PIM to do a CLI search of a random (S,G) if the
(S,G) has no RPF due to no route, let the user know about
the issue instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When displaying the 'show ip pim upstream' command.
Display proper information about the RPF address
choosen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying the mroute table, add ability to fill
in all the missing data that for human eyes can be assumed.
This will allow people using grep over the command
can get more information.
sharpd@robot ~> sudo vtysh -c "show ip mroute fill"
Source Group Proto Input Output TTL Uptime
* 229.1.1.1 STATIC dum0 enp3s0 1 00:11:07 Default-IP-Routing-Table
* 229.1.1.1 STATIC dum0 virbr0 1 00:01:47 Default-IP-Routing-Table
sharpd@robot ~>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If pim/igmp is not enabled on an interface, the ->info pointer will be
null. Need to check that before dereferencing it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Start the conversion of pim configuration commands to use
the ferr side channel to allow more detailed information
to be returned to cli commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All the rp debugs were a mish-mash of TRACE or ZEBRA,
but the reality they were all focused on handling NHT
issues associated with the RP's. So let's create
a new debug 'debug pim nht rp' if you are having
issues with RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature does this:
Add the ability to store the non-prefix static RP
entries into a table. Then to lookup the G to
find the RP in that table, finding the longest
prefix match across both prefix-lists and
static RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Error check return from setsockopt and sockets
2) Check return codes for str2prefix
3) Clean up some potential NULL References
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Clean up display of S,GRPt prune state to be more meaningful
2) Upon receipt of a S,GRPt prune make sure we transition to
the correct state
3) Upon loss of a S,GRPt prune make sure we transition to
the correct state as well as immediately send a *,G
join upstream to propagate the loss of the prune.
4) Removal of a weird S,G state being installed upon
loss of a S,G RPt prune.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This could happen if routing isn't up yet but the command did take so we
should exit 0 here. Testing:
root@cel-redxp-10[frr-dwalton76]# vtysh -c 'conf t' -c' ip pim rp
11.11.11.11'
% No Path to RP address specified: 11.11.11.11
root@cel-redxp-10[frr-dwalton76]# echo $?
0
root@cel-redxp-10[frr-dwalton76]#
Upon frr restart vtysh replays pim bfd configuration
cli before pim sm command, this results in failure
of pim bfd config on the VIF as it is not pim enabled yet.
Inside pim bfd configuration, call to create PIM vif
handler if it is not created yet.
no ip pim bfd, if pim is not enabled display warning and return.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This patch does two things:
1) Converts the pim_ifp->ifchannel_list to a pim_ifp->ifchannel_rb
2) Removes the hashing to use the RB RB_FIND instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the redundant information in pim_ifp->pim_ifchannel_list
just call it pim_ifp->ifchannel_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim->ifchannel_list can be duplicated by iterating
over each vrf and then over each pim_ifp->pim_ifchannel_list
Since list handling is taking allot of time at scale
convert over to using this value.
Additionally clean up pim_cmd.c to have helper functions
to handle the actual encoding of data for output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
'show ip mroute vrf all count' crashes currently
This commit fixes that issue
Ticket: CM-17052
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In show ip pim interface and show ip pim interface <intf>
display State "down" pim enabled interfaces.
Ticket:CM-16809
Reviewed By:CCR-6398
Testing Done:
show ip pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
br1 up 2.0.1.1 0 local 0 0
lo up 6.0.0.1 0 local 0 0
pimreg up 0.0.0.0 0 local 0 0
swp1 down 6.0.1.1 0 local 0 0
swp2 up 6.0.2.1 1 local 0 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Move the upstream_list, hash and wheel into 'struct pim_instance'
Remove all pimg to pim in pim_upstream
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A bunch of functions had return values that were never
checked for ( and not needed ) and opposite return values
for proper calling function boolean logic.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the socket fd to be owned by the pimg pointer as
well as the counters associated with the fd. This will
allow us to future proof our code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
All PIM Neighbors for a given pim interface is registered with
BFD.
Upon receiving BFD status down event, PIM Neighbor with BFD info is deleted.
Add pim bfd configuraiton (CLI) per interface, '[no] ip pim bfd'
Testing Done:
Configure BFD under PIM interface on all neighbor routers,
check bfd sessions up, remote end unconfigure BFD, results in BFD session down.
Previous state was UP to New state DOWN, results in PIM neighbor delete behind
that particular pim interface.
Pim-smoke Results:
Ran 94 tests in 7409.680s
FAILED (SKIP=8, failures=2)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
If frr.conf file has pim hello option setup prior to pim sm under an interface, upon frr start/restart hello option cli replayed prior to sm command
from vtysh. Added a code in pim hello option cli handler to create pim vif if it does not exist.
Testing Done:
configure pim hello options before pim sm in frr.conf file and restart frr
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When we have no normal mroutes and only static mroutes
there exists a code path where we attempted to dereference
c_oil when we were showing static mroutes. Looks like
a cut-n-paste error, we should be using s_route->c_oil there
Ticket: CM-15013
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ip pim ecmp and ip pim ecmp rebalance configuration CLIs were
not adding to Quagga.confg or running configuration.
Added both the configuration write in Config write handler.
Testing Done: Execute configuration cli and verified running config
and Quagga.conf file containing both configuration.
03# show running-config
Building configuration...
Current configuration:
!
ip multicast-routing
ip pim rp 6.0.0.9 230.0.0.0/16
ip pim join-prune-interval 61
ip pim ecmp
ip pim ecmp rebalance
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When we uplifted the cli from old -> new, I did not properly
handle the switch from <1-3> to (1-3) for number ranges.
Also fix some minor variable renaming that happened?
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This was causing a crash when no group address was passed
because a garbage pointer valuse was used. It also was ignoring
the group address when passing one.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Execute ip igmp version 3 under swp interface,
verified show running displayed 'ip igmp' configuration.
Continuous sending group membership, performed 'no ip igmp'
and verified, group membership flushed. Performed
'ip igmp version 3', verified 'show ip igmp groups'
displaying igmp membership re-populated.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In this patch, PIM nexthop tracking uses locally populated nexthop cached list
to determine ECMP based nexthop (w/ ECMP knob enabled), otherwise picks
the first nexthop as RPF.
Introduced '[no] ip pim ecmp' command to enable/disable PIM ECMP knob.
By default, PIM ECMP is disabled.
Intorudced '[no] ip pim ecmp rebalance' command to provide existing mcache
entry to switch new path based on hash chosen path.
Introduced, show command to display pim registered addresses and respective nexthops.
Introuduce, show command to find nexthop and out interface for (S,G) or (RP,G).
Re-Register an address with nexthop when Interface UP event received,
to ensure the PIM nexthop cache is updated (being PIM enabled).
During PIM neighbor UP, traverse all RPs and Upstreams nexthop and determine, if
any of nexthop's IPv4 address changes/resolves due to neigbor UP event.
Testing Done: Run various LHR, RP and FHR related cases to resolve RPF using
nexthop cache with ECMP knob disabled, performed interface/PIM neighbor flap events.
Executed pim-smoke with knob disabled.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
(cherry picked from commit cba4448178)
To the 'ip pim spt-switchover infinity-and-beyond' command
add 'prefix-list <PLIST>'. To the command.
Use this as the basis to deny (Not immediate switchover)
or permit (Immediate switchover), based upon matching
the group address and the prefix-list.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In this patch, PIM nexthop tracking uses locally populated nexthop cached list
to determine ECMP based nexthop (w/ ECMP knob enabled), otherwise picks
the first nexthop as RPF.
Introduced '[no] ip pim ecmp' command to enable/disable PIM ECMP knob.
By default, PIM ECMP is disabled.
Intorudced '[no] ip pim ecmp rebalance' command to provide existing mcache
entry to switch new path based on hash chosen path.
Introduced, show command to display pim registered addresses and respective nexthops.
Introuduce, show command to find nexthop and out interface for (S,G) or (RP,G).
Re-Register an address with nexthop when Interface UP event received,
to ensure the PIM nexthop cache is updated (being PIM enabled).
During PIM neighbor UP, traverse all RPs and Upstreams nexthop and determine, if
any of nexthop's IPv4 address changes/resolves due to neigbor UP event.
Testing Done: Run various LHR, RP and FHR related cases to resolve RPF using
nexthop cache with ECMP knob disabled, performed interface/PIM neighbor flap events.
Executed pim-smoke with knob disabled.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add code to properly receive v6 addresses up from zebra and to
properly place them into our interface secondary address list.
Additionally cleanup some code in pim_cmd.c that was broken
by these changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code change adds the ability to specify that
we should be able to work with older versions
of PIM.
In future commits we will actually use this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Interface type has been replaced with the SSM range config. And SSM
groups can now co-exists with ASM groups. I have left the pim ssm
per-interface cli control hidden. It now enables pim-sm with a warning.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done: pim-smoke
SSM groups (232/8 or user configured SSM range) can exist in the same
multicast network as ASM groups. For such groups all RPT related state
machine operations have to be skipped as defined by section 4.8 of
RFC4601 -
1. Source registration is skipped for SSM groups. For SSM groups mroute
is setup on the FHR when a new multicast flow is rxed; however source
registration (i.e. pimreg join) is skipped. This will let the ASIC black
hole the traffic till a valid OIL is added to the mroute.
2. (*,G) IGMP registrations are ignored for SSM groups.
Sample output:
=============
fhr# sh ip pim group-type
SSM group range : 232.0.0.0/8
fhr# sh ip pim group-type 232.1.1.1
Group type: SSM
fhr# sh ip pim group-type 239.1.1.1
Group type: ASM
fhr#
Sample config:
=============
fhr(config)# ip pim ssm prefix-list ssm-ranges
fhr(config)#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done:
1. SSM/ASM source-registration/igmp-joins.
2. On the fly multicast group type changes.
3. pim-smoke.
When we get a SGrpt Prune embedded in the *,G Join,
Display the created ifchannel as being SGRpt state.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Changed the state field in the "sh ip pim upstream" output to include
register and join state info as a comma separated value. Register info
is supressed if reg-state=NoInfo.
Sample output:
=============
root@fhr:/home/cumulus# net show pim upstream
Iif Source Group State Uptime JoinTimer
RSTimer KATimer RefCnt
swp1 33.1.1.1 239.1.1.2 J,RegP 00:00:18 --:--:--
00:00:44 00:03:24 2
root@fhr:/home/cumulus#
root@rp:/home/cumulus# net show pim upstream
Iif Source Group State Uptime JoinTimer
RSTimer KATimer RefCnt
lo * 239.1.1.2 J 00:02:08 00:00:52
--:--:-- --:--:-- 1
swp1 33.1.1.1 239.1.1.2 J 00:00:16 00:00:11
--:--:-- 00:03:26 1
root@rp:/home/cumulus#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: pim-smoke
With the separation of register-state and upstream-join-state we no
longer need an enumeration that covers both states. This commit includes
the following -
1. Defined new enumeration for reg state (this 1:1 with RFC4601).
2. Dropped JOIN_PENDING enum value from upstream join state. RFC4601
only define two values NOT_JOINED and JOINED for this state.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: Verified register setup manually and ran pim-smoke
On the FHR upstream-join-state is not particularly relevant as we
don't need to send upstream JPs for the SG. So that field was being
overloaded with the register-state. However some of the events that
triggered changes to the JoinDesired macro were accidentally overwriting
the state with join info (instead of treating it as register info)
confusing the register state machine.
To make the PIM RFC macros' implemention simple I have separated out
the register-state. And upstream->state now solely describes the
upstream-join-state independent of the role of the PIM router.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14700
Testing Done: verified pim-register state-machine with separate and
combined FHR/RP routers. Also ran pim-smoke.
The 'show ip pim state' command was not
working quite correctly from when
we moved over to the new vtysh-grammar.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Automatically turn on pim if the daemon is turned on.
Hide the 'ip multicast-routing' command
Disable the 'no ip multicast-routing' command
Do not display the 'ip multicast-routing' command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you enter these commands, under an interface:
ip igmp version ...
ip igmp query-interval ...
ip igmp query-max-response-time ...
ip igmp query-max-response-time-dsec ...
These commands will now just turn on igmp for the
interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability for PIM to send Join/Prunes as an
aggregated message instead of individual messages
for each S,G.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleanup the in_ifname and out_ifname buffers
to be large enough to hold the actual interface
names.
Additionally move the common variables to be defined
once, instead of inside of multiple for loops
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
PIM was handling vif creation deletion poorly
for interface down and up events. Fix this
issue by keeping track of which vif index'es
we have issued and allow the wholes to be
filled in.
Ticket: CM-14556
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit does these three things:
1) Add code to 'show ip pim state' to show where OIF's got their
decision to include that interface
2) Add code in pim_mroute_[add|del] to display what we think we are
adding to the kernel
3) Add code to properly track where we got the incoming request from and
to appropriately not remove a OIL if we have state still
Ticket: CM-14034
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Start the abstraction of the zclient data structure out from a
global variable for the entire program to a global variable
to the pim_zebra.c file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were adding the 'ip msdp ...' command to
the parser 2x. Some new code added to the
parser apparently catches this for us now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Mixing well-known and variable property names makes the output difficult
to parse. so wrapped variable-keyed dicts with well-known property
names (such as "oil") in the following outputs -
"show ip mroute json"
"show ip msdp mesh-group json"
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There exists situations where we have noted that
we need to rescan but have missed the window
of opportunity to actually redo the scan
so for the moment allow the S,G 30 second
scanner notice the missed opportunity and
fix it. We'll remove this later.
Ticket: CM-13988
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify pim_usptream_new to auto create the pim
channel oil. Why? Because there exists situations
where we have upstream state and we are attempting
to set the inherited_olist on it and we have
not created the channel oil yet. When that
happens we end up with mroutes that are
being meanies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging is turned on for 'debug mroute' we
are unable to tell when a mroute has been added
or deleted from the mrib. Notice when we
do it and who called it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make the 'ip igmp query-max-response-time' command
take input in deci-seconds and make the
'ip igmp query-max-response-time-dsec' command hidden.
Ticket:CM-13786
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Was failing with a vague error -
"Source set failed"
Changed to used the error string (used by the rest of the commands) -
"Pim not enabled on this interface"
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
