* If the MSDP peer receives the SA from a non-RPF peer towards the
originating RP, it will drop the message.
* SA messages are forwarded away from the RP address only.
* SA messages are not forwarded within the mesh group.
* Preventing the MSDP connection from being dropped due to RPF check
failure (RFC3618, section 13 "MSDP Error Handling")
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Signed-off-by: Adriano Reis <areis@barrukka.local>
There are couple spots where group may be NULL and
when we output strings associated with it we should
ensure we are not doing something stupid.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Description:
"show ip mroute" displays only installed(kernel) mroutes, where
as "show ip mroute json" diplays both installed and not installed
mroutes in the o/p.To make this consistant, diplaying only valid
routes in json o/p.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
Added json support for the following PIM commands.
1. show ip mroute [vrf NAME] count [json]
2. show ip mroute vrf all count [json]
3. show ip mroute [vrf NAME] summary [json]
4. show ip mroute vrf all summary [json]
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Added a new show command "show ip multicast", display the multicast data
packet in and out on interface level.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Signed-off-by: Sarita Patra <saritap@vmware.com>
JSON output for igmp group display is modified as follows for better python handling.
1. Under each interface make array of group as an object
2. Include source and group inside each group object
These improvements are required for the set of topotest cases which will be upstreamed shortly.
Signed-off-by: Saravanan K <saravanank@vmware.com>
This CLI will allow user to configure a igmp group limit which will generate
a watermark warning when reached.
Though watermark may not make sense without setting a limit, this
implementation shall serve as a base to implementing limit in future and helps
tracking a particular scale currently.
Testing:
=======
ip igmp watermark-warn <10-60000>
on reaching the configured number of group, pim will issue warning
2019/09/18 18:30:55 PIM: SCALE ALERT: igmp group count reached watermak limit: 210(vrf: default)
Also added group count and watermark limit configured on cli - show ip igmp groups [json]
<snip>
Sw3# sh ip igmp groups json
{
"Total Groups":221, <=====
"Watermark limit":210, <=========
"ens224":{
"name":"ens224",
"state":"up",
"address":"40.0.0.1",
"index":6,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"groups":[
{
"source":"40.0.0.1",
"group":"225.1.1.122",
"timer":"00:03:56",
"sourcesCount":1,
"version":2,
"uptime":"00:00:24"
<\snip>
<snip>
Sw3(config)# do sh ip igmp group
Total IGMP groups: 221
Watermark warn limit(Set) : 210
Interface Address Group Mode Timer Srcs V Uptime
ens224 40.0.0.1 225.1.1.122 ---- 00:04:06 1 2 00:13:22
ens224 40.0.0.1 225.1.1.144 ---- 00:04:02 1 2 00:13:22
ens224 40.0.0.1 225.1.1.57 ---- 00:04:01 1 2 00:13:22
ens224 40.0.0.1 225.1.1.210 ---- 00:04:06 1 2 00:13:22
<\snip>
Signed-off-by: Saravanan K <saravanank@vmware.com>
Problem: output is cut short when prefix string all octets are 3 digit.
RCA: Buffer was allocated only to hold ip addr str.
Fix: Added 3 bytes more to hold prefix length and a /.
Modified buffer in 'show ip pim bsrp-info' and 'show ip pim bsm database'
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: Client1------LHR-----(int-1)RP(int-2)------client2
Client2 send IGMP join for group G.
Client1 send IGMP join for group G.
verify show ip mroute in RP, will have 2 OIL.
Client2 send IGMP leave.
Verify show ip mroute in RP, will still have 2.
Root cause: When RP receives IGMP join from client2, it creates
a (s,g) channel oil and add the interface int-2 into oil list and
set the flag PIM_OIF_FLAG_PROTO_IGMP to int-2
Client1 send IGMP join, LHR will send a (*,G) join to RP. RP will
add the interface int-1 into the oil list of (s,g) channel_oil and
will set the flag PIM_OIF_FLAG_PROTO_IGMP and PIM_OIF_FLAG_PROTO_PIM
to the int-1 and set PIM_OIF_FLAG_PROTO_PIM to int-2 as well. It is
happening because of the pim_upstream_inherited_olist_decide() and
forward_on() get all the oil and update the flag wrongly.
So now when client 2 sends IGMP prune, RP will not remove the int-2
from oil list since both PIM_OIF_FLAG_PROTO_PIM & PIM_OIF_FLAG_PROTO_IGMP
are set, it just unset the flag PIM_OIF_FLAG_PROTO_IGMP.
Fix: Introduced new flags in if_channel, PIM_IF_FLAG_MASK_PROTO_PIM
& PIM_IF_FLAG_MASK_PROTO_IGMP. If a if_channel is created because of
pim join or pim (s,g,rpt) prune received, then set the flag
PIM_IF_FLAG_MASK_PROTO_PIM. If a if_channel is created becuase of IGMP
join received, then set the flag PIM_IF_FLAG_MASK_PROTO_IGMP.
When an interface needs to be added into the oil list check if
PIM_IF_FLAG_MASK_PROTO_PIM or PIM_IF_FLAG_MASK_PROTO_IGMP is set, then
update oil flag accordingly.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue 1: "show ip pim interface traffic" not show prune TX/RX
Rootcause : not added the variable in the json
Fix : add prune TX/RX in show ip pim interface traffic json
Issue 2: "show ip pim rp-info" not shows the key iAmRp when it is false
Rootcause: Only display the key when the value is true.
Fix: add iAmRp as false in show ip pim rp-info json
Issue 3: "show ip pim rp-info" not showing outbound interface if it is empty
Rootcause: Only display when there is any OIL
Fix: When RP is not reachable then, the outbound interface is Unknown
The command "show ip pim rp-info json" not displaying the outbound
interafce if it is unknown
Signed-off-by: Sarita Patra <saritap@vmware.com>
S - Sparse Mode
C - indicates there is a member of the group directly connected to the router.
R -set on an (S, G) by the receipt of an (S, G) RP bit prune message.
F -This indicates that this router is a FHR and send register messages to RP to inform RP of this active source
P - OIL list is NULL. That means the router will send a prune.
T - At least one packet received via SPT.
Signed-off-by: Sarita Patra <saritap@vmware.com>
RCA: When configured more than 32(MAXVIS), the inerfaces that are configured
after 32nd interfaces have the value of MAXVIF.
This is used as index to access the free vif tracker of array size 32(MAXVIFS).
So the channel oil list pointer which is present as the next field in pim structure get corrupt, when updating free vif.
This gets accessed during rpf update resulting in crash.
Fix: Refrain from allocating mcast interface structure and throw config error when more than MAXVIFS are attempted to configure.
Max vif checks are exempted for vrf device and pimreg as vrf device will be the first interface and not expected to fail and pimreg has reserved vif.
vxlan tunnel termination device creation has this check and throw warning on max vif.
All other creation are through CLI.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Root cause: The header display is put in common outside the vtysh/json if-else.
Fix: Brought inside vtysh condition.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Issue: show ip mroute displays the mroute uptime (time when
mroute installed into the kernel) per oif.
This is confusing.
Fix: Display mroute uptime per (s,g) mroute entry.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The memory type PIM_SPT_PLIST_NAME is specific to
SPT but we are going to store more prefix-list names
in pim, make it generic to allow for less confusion
in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
