L3VNI configured in a specific VRF is allowed to unconfigure from any
VRF, including default (global) VRF. This results L3VNI delete notification
to BGP and subsequent type-5 route uninstall from the VRF the L3VNI belong to.
This also resulted in the inconsistent running configuration.
The deleted L3VNI still shows up in its original VRF. The VRF in which the
"no vni <x>" was executed doesn't display its own L3VNI.
Added a VRF check in zebra to prevent this.
Signed-off-by: Kishore Aramalla <karamalla@vmware.com>
When having a route recovery, because of the route installation
cycling and the next hop label check, it could happen that the PW
never gets recovered. The original code shows the intention of retrying,
but the code was missing. The fix includes the call to the timer programming
the recovery attempt.
Example for reproducing the issue:
|P1| <-> |P2| <-> |P3|
- Being P1, P2, P3 nodes, using IS-IS as IGP, and having a pseudowire
betwen P1 and P3 (P1, P2, P3 having configured LDP daemons).
- After 60 seconds, kill the IS-IS daemon in P2.
- Wait 30 seconds
- Launch again the IS-IS daemon in P2
- The bug/issue is that after P1 <-> P3 recovering connectivity sometimes
the PW is not recovered because the reason explained in the first paragraph.
Signed-off-by: F. Aragon <paco@voltanet.io>
In zebra terminate path, the node was attempted to remove
twice from the RB_TREE table. This lead to a crash during
zebra shutdown zebra_router_free_table already calls RB_REMOVE
to remove a node from rb tree table.
siginfo=0x7fffd9134a30, context=<optimized out>) at lib/sigevent.c:249
rbt=<optimized out>, t=<optimized out>) at lib/openbsd-tree.c:226
t=0x56296965ff50 <zebra_router_table_head_RB_INFO>) at lib/openbsd-tree.c:383
rbt=rbt@entry=0x562969669bd0 <zrouter+16>, elm=elm@entry=0x56296afcf810)
at lib/openbsd-tree.c:393
(elm=0x56296afcf810, head=0x562969669bd0 <zrouter+16>) at zebra/zebra_router.h:46
Singned-off-by: Chirag Shah <chirag@cumulusnetworks.com>
We were memsetting zebra_pbr_rule struct after
we had already put some information in it. Also updated
the init of the struct to use braces instead of a
memset.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The `show ipv[4|6] <nht|import-check> ...` commands are starting
to produce a bunch of output due to multiple daemons now
using the code. Allow the specification of a v4 or v6 address
to allow the show command to only display the interesting nht.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fix covers the case where two or more events are processed but only one
becoming effective. E.g. when mixing a synchronous label request from a LDP
deamon and an asynchronous request from a BGP daemon it could happen to the
BGP having the label chunk, but the LDP stuck waiting for the response.
Given e.g.
ldpd <-------->
(sync label request)
Zebra (label proxy) <--> Zebra (shared label manager)
bgpd <-------->
(async label request)
Sequence:
LDP label request ----->
Zebra (label proxy FW) ----> Zebra (LM)
BGP label request ----->
Zebra (label proxy FW) ----> Zebra (LM)
<---- Zebra (LM) RP LDP
<---- Zebra (LM) RP BGP
Signed-off-by: F. Aragon <paco@voltanet.io>
We don't use th vrf-level VRF_RIB_SCHEDULED flag any longer;
remove it and collapse the zebra_vrf flags' values.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The current code path of registration does this:
a) Lookup or create the rnh
b) register the client with the rnh for callback
If this is a new rnh send a response to the client that
only includes the rnh data that it has (nothing so no path)
If this is a existing rnh send the actual path to the client,
if it exists.
c) If a new client or a flag has changed refigure and send result
to all clients.
This is problematic in that suppose the rnh is new. Clients
will receive two answers:
1) A call back with no nexthops
2) A call back with the resolved # of nexthops
Imagine pim who depends on nht to handle this, pim will create
a mroute( because it does a hard lookup of the rpf as it is registering
the nexthop ), then it will receive the first callback causing
it to tear down the mroute and then receive the second callback
causing it to put it right back.. This is obviously not very
good for mroutes.
This code moves the send to the new client till after the new
client has connected, thus only allowing one callback to the new
client with the actual answer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Routing protocols are allowed ( and even encouraged ) to modify
the flags that influence the nexthop tracking. As such when
we modify the tracking of a nexthop to go from, say, connected force
or not we must re-evaluate the nexthop and send the results
up to the interested parties.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
After we have evaluated the rnh for an import-check type
and we copy the re then we know that the state has changed
and we should be notifying the end user about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
LSP processing was a zvrf flag based upon a connected route
coming or going. But this did not allow us to know
that we should do lsp processing other than after the meta-queue
processing was finished.
Eventually we moved meta-queue processing of do_nht_processing
to after the dataplane sent the main pthread some results.
This of course left us with a timing hole where if a connected
route came in and we received a data plane response *before*
the meta queue was processed we would not do the work as necessary.
Move the lsp processing to a flag off of the rib_dest_t. If it
is marked then we need to process lsps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a detailed debugging command for NHT tracking and add
the detailed output to the log about why we make some decisions
that we are. I tried to model this like the rib processing
detailed debugs that we added a few months back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently nexthop tracking is performed for all nexthops that
are being tracked after a group of contexts are passed back
from the data plane for post install processing.
This is inefficient and leaves us sending nexthop tracking
changes at an accelerated pace, when we think we've changed
a route. Additionally every route change will cause us
to relook at all nexthops we are tracking irrelevant if
they are possibly related to the route change or not.
Let's modify the code base to track the rnh's off of the rib
table's rn, `rib_dest_t`. So after we process a node, install
it into the data plane, in rib_process_result we can
look at the `rib_dest_t` associated with the rn and see that
a nexthop depended on this route node. If so, refigure it.
Additionally we will store rnh's that are not resolved on the
0.0.0.0/0 nexthop tracking list. As such when a route node
changes we can quickly walk up the rib tree and notice that
it needs to be reprocessed as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a default route_node for our routing tables. This will allow us
to know that we can hang data off the default route for processing.
We will be hanging the nexthop tracking data structures off the rib_dest_t
so that we can know which nexthops we need to handle. Effectively
nexthops that we are tracking that are unresolved will be stored on the
default route. When something changes in the rib tree we can
work up the rn->parent pointer checking for nexthops we need to re-evaluate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The resolved_route is the prefix we are using in the routing table
to resolve this particular nexthop we are tracking. Add code
to better track it's change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The prn value as passed in may be NULL as such do not
allow it to be derefed (even though it works now).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have several route types KERNEL and CONNECT that are handled via special
case in the code. This was causing a lot of work keeping the two different
classes of route types as special(SYSTEM OR NOT). Put the dplane
in charge of the code that sets the bits for signalling route install/failure.
This greatly simplifies the code calling path and makes all route types
be handled exactly the same. Additionaly code that we want to run
post data plane install can just work as per normal then, instead
of having to know we need to run it when we have a special type
of route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
When we get a route install failure from the kernel, actually
indicate in the rib the status of the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When switching routes from one route type to another actually
unset the old route as enqueued.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down, the individual vrf's own the shutdown of the table
and subsuquent removal from the routes from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down and we have a very large table to shutdown
and after we've intentionally closed all the client connections
close the zebra zserv client socket.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It had no logical reason to be in the default VRF. This moves it to the
zebra_router, which is better suited to store global references.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
A lot of checks relied on the VRF ID and the EVPN VRF ID to be the same.
This patch changes those checks to the EVPN_ENABLED macro, which checks
if the VRF is the EVPN one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Fix the macros for reading NLA attribute info
from an extended error ack. We were processing the data
using route attributes (rtattr) which is identical in size
to nlattr but probably should not be used.
Further, we were incorrectly calculating the length of the
inner netlink message that cause the error. We have to read
passed that in order to access all the nlattr's.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For a MAC-IP pair generally local/netlink msg for
MAC is received followed by Neigh. The MAC can be detected as duplicate
during this event.
When a neigh update is received, the neigh inherits DUP flag from its
MAC and along with that mark the neigh as INACTIVE.
Also, In the case of DUP detected neigh, do not update its state
to ACTIVE before determining to send notification to bgpd.
There is a time when Neigh update received prior to MAC update.
In that case neigh is marked as inactive since its MAC is
still in REMOTE state. Once the MAC update is received and
it is detected as DUPLICATE, the neigh would inherit DUP flag
but remained in inactive state.
By fixing the first case, the neigh remains in inactive once
detected as DUPLICATE in both scenarios.
The unfreeze action would mark all inherited neighs to ACTIVE,
and clears DUP flag then sends notification to bgpd (to send type-2).
Ticket:CM-24339
Reviewed By:CCR-8451
Testing Done:
Validated dup detection on both environment where neigh and mac
notification can come as either one first.
With the fix, the neigh was remained in "inactive" state
once detected as duplicate.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The 'sho ip route summary' and 'sho ip route summary <prefix>'
paths used different definitions of a 'fib' route. Use
the route-entry 'INSTALLED' flag in both places.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This replaces manual checks of the flag with a wrapper macro to convey
the meaning "is evpn enabled on this vrf?"
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Rename {bgp,zvrf}_def{ault} to {bgp,zvrf}_evpn where it makes sense,
i.e. when they contain the EVPN instance.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Since the EVPN VRF may not be the default one, compare received
messages' VRF agains the EVPN VRF and not the Default.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This uses the EPVN VRF to store L3VNIs hashes, and looks up L2VNIs in
this VRF as they are stored there.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This sends local VNIs and local MAC addresses to the BGP instance
responsible for EVPN rather than the default one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Since the EVPN session and underlay can be in a non-default VRF, the
default VRF can be an overlay VRF.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
If the EVPN VRF is not the default one (i.e. with advertise-all-vni),
this allows showing its information with `show bgp l2evpn evpn ...`
commands. They do not require adding `vrf VRFNAME` since we only
support a single EVPN VRF. The same is true for zebra-specific commands
(e.g. `show evpn ...`).
Configuration commands are not restricted to the default VRF but to
the EVPN one, that is to the one bearing `advertise-all-vni`.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
The EVPN VRF is defined by bgpd, and is the one vrf where
`advertise-all-vni` is present.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Duplicate address detection and recovery was relying on the l2-vni backptr
in the neighbor entry which was simply not initialized resulting in
a NULL pointer access in a setup with dup-addressed VMs -
VM1:{IP1,M1} and VM2:{IP1,M2}
Call stack:
(gdb) bt 6
at lib/sigevent.c:249
nbr=nbr@entry=0x559347f901d0, vtep_ip=..., vtep_ip@entry=..., do_dad=do_dad@entry=true,
is_dup_detect=is_dup_detect@entry=0x7ffc7f6be59f, is_local=is_local@entry=true)
at ./lib/ipaddr.h:86
ip=0x7ffc7f6be6f0, ifp=0x559347f901d0, zvni=0x559347f86800) at zebra/zebra_vxlan.c:3152
(More stack frames follow...)
(gdb) p nbr->zvni
$8 = (zebra_vni_t *) 0x0 <<<<<<<<<<<<<<<<<<<<
(gdb)
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
System Routes if received over the netlink bus in a
specific pattern that causes an update operation for that
route in zebra can leave the dest->selected_fib pointer NULL,
while having the ZEBRA_FLAG_SELECTED flag set. Specifically
one way to achieve this is to do this:
`ip addr del 4.5.6.7/32 dev swp1 ; ip addr add 4.5.6.7/32 dev swp1 metric 9`
Why is this a big deal?
Because nexthop tracking is looking at ZEBRA_FLAG_SELECTED to
know if we can use a route, while nexthop active checking uses
dest->selected_fib.
So imagine we have bgp registering a nexthop. nexthop tracking in
the above case will be able to choose the 4.5.6.7/32 route
if that is what the nexthop is, due to the ZEBRA_FLAG_SELECTED being
properly set. BGP then allows the peers connection to come up and we
install routes with a 4.5.6.7 nexthop. The rib processing for route
installation will then look at the 4.5.6.7 route see no
dest->selected_fib and then start walking up the tree to resolve
the route. In our case we could easily hit the default route and be
unable to resolve the route. Which then becomes inactive in the
rib so we never attempt to install it.
This commit fixes this problem because when the rib_process decides
that we need to update the fib( ie replace old w/ new ), the
replacement with new was not setting the `dest->selected_fib` pointer
to the new route_entry, when the route was a system route.
Ticket: CM-24203
Signed-off-by: Donald Sharp <sharpd@cumulusnetworkscom>
The dest->selected_fib should be reported in json output
so that we can debug subtle conditions a bit better in the
future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleaup the rnh tables on shutdown before we cleanup tables. As that
this will remove any need to do rnh processing as part of shutdown.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we get a neighbor entry in zebra we start processing it.
Let's add some additional debugs to the processing so that when
it bails out and we don't use the data, we know the reason.
This should help in debugging the problems from why bgp does
not appear to have data associated with a neighbor entry
in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The check for an entry being NUD_PERMANENT has already been done
there is no need to do it twice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use const in the accessors for pseudowire nhlfe data; pull
that through the kernel-facing apis that use that data.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
In prep for adding nexthop info for pws, rename the accessor
for the pw destination. Add a nexthop-group to the pw
data in the dataplane module.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The current definition of an unnumberd interface as an interface with a
/32 IPv4 is too restrictive, especially for EVPN symmetric routing since
commit 2b83602b2 "*: Explicitly mark nexthop of EVPN-sourced routes as
onlink".
It removes the bypass check wether the nexthop is an EVPN VTEP, and
relies on the SVI to be unnumberd to bypass the gateway lookup. While
this works great if the SVI has an IP, it might not, and the test falls
flat and EVPN type 5 routes are not installed into the RIB.
Sample interface setup, where vxlan-blue is the L3VNI and br-blue the
SVI:
+----------+
| |
| vrf-blue |
| |
+---+--+---+
| |
+-------+ +-----------+
| |
+----+----+ +---------+---------+
| | | br1 |
| br-blue | | 10.0.0.1/24 |
| | +-+-------+-------+-+
+----+----+ | | |
| | | |
+-----+------+ +-----+--+ +--+---+ +-+----+
| | | | | | | |
| vxlan-blue | | vxlan1 | | eth1 | | eth2 |
| | | | | | | |
+------------+ +--------+ +------+ +------+
For inter-VNI routing, the SVI has no reason to have an IP, but it still
needs type-5 routes from remote VTEPs.
This commit expands the definition of an unnumberd interface to an
interface having a /32 IPv4 or no IPv4 at all.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
When a vrf is deleted we need to tell the zebra_router that we have
finished using the tables we are keeping track of. This will allow
us to properly cleanup the data structures associated with them.
This fixes this valgrind error found:
==8579== Invalid read of size 8
==8579== at 0x430034: zvrf_id (zebra_vrf.h:167)
==8579== by 0x432366: rib_process (zebra_rib.c:1580)
==8579== by 0x432366: process_subq (zebra_rib.c:2092)
==8579== by 0x432366: meta_queue_process (zebra_rib.c:2188)
==8579== by 0x48C99FE: work_queue_run (workqueue.c:291)
==8579== by 0x48C3788: thread_call (thread.c:1607)
==8579== by 0x48A2E9E: frr_run (libfrr.c:1011)
==8579== by 0x41316A: main (main.c:473)
==8579== Address 0x5aeb750 is 0 bytes inside a block of size 4,424 free'd
==8579== at 0x4839A0C: free (vg_replace_malloc.c:540)
==8579== by 0x438914: zebra_vrf_delete (zebra_vrf.c:279)
==8579== by 0x48C4225: vrf_delete (vrf.c:243)
==8579== by 0x48C4225: vrf_delete (vrf.c:217)
==8579== by 0x4151CE: netlink_vrf_change (if_netlink.c:364)
==8579== by 0x416810: netlink_link_change (if_netlink.c:1189)
==8579== by 0x41C1FC: netlink_parse_info (kernel_netlink.c:904)
==8579== by 0x41C2D3: kernel_read (kernel_netlink.c:389)
==8579== by 0x48C3788: thread_call (thread.c:1607)
==8579== by 0x48A2E9E: frr_run (libfrr.c:1011)
==8579== by 0x41316A: main (main.c:473)
==8579== Block was alloc'd at
==8579== at 0x483AB1A: calloc (vg_replace_malloc.c:762)
==8579== by 0x48A6030: qcalloc (memory.c:110)
==8579== by 0x4389EF: zebra_vrf_alloc (zebra_vrf.c:382)
==8579== by 0x438A42: zebra_vrf_new (zebra_vrf.c:93)
==8579== by 0x48C40AD: vrf_get (vrf.c:209)
==8579== by 0x415144: netlink_vrf_change (if_netlink.c:319)
==8579== by 0x415E90: netlink_interface (if_netlink.c:653)
==8579== by 0x41C1FC: netlink_parse_info (kernel_netlink.c:904)
==8579== by 0x4163E8: interface_lookup_netlink (if_netlink.c:760)
==8579== by 0x42BB37: zebra_ns_enable (zebra_ns.c:130)
==8579== by 0x42BC5E: zebra_ns_init (zebra_ns.c:208)
==8579== by 0x4130F4: main (main.c:401)
This can be found by: `ip link del <VRF DEVICE NAME>` then `ip link add <NAME> type vrf table X` again and
then attempting to use the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we install a new route into the kernel always use
REPLACE. Else if the route is already there it can
be translated into an append with the flags we are
using.
This is especially true for the way we handle pbr
routes as that we are re-installing the same route
entry from pbr at the moment.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that the next hop's VRF is used for IPv4 and IPv6 unicast routes
sourced from EVPN routes, for next hop and Router MAC tracking and
install. This way, leaked routes from other instances are handled properly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface. Howver, in the model that
is supported in the implementation and commonly deployed, there is no
explicit Overlay IP address associated with the next hop in the tenant
VRF; the underlay IP is used if (since) the forwarding plane requires
a next hop IP. Therefore, the next hop has to be explicit flagged as
onlink to cause any next hop reachability checks in the forwarding plane
to be skipped.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
Use existing mechanism to specify the nexthops as onlink when installing
these routes from bgpd to zebra and get rid of a special flag that was
introduced for EVPN-sourced routes. Also, use the onlink flag during next
hop validation in zebra and eliminate other special checks.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
Use the L3 interface exchanged between zebra and bgp in route install.
This patch in conjunction with the earlier one helps to eliminate some
special code in zebra to derive the next hop's interface.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
The implementation currently derives this L3 interface for EVPN tenant
routes using special code that looks at route flags. This patch
exchanges the L3 interface between zebra and bgpd as part of the L3-VNI
exchange in order to eliminate some this special code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Running zebra after commit 888756b208
in valgrind produces this item:
==17102== Invalid read of size 8
==17102== at 0x44D84C: rib_dest_from_rnode (rib.h:375)
==17102== by 0x4546ED: rib_process_result (zebra_rib.c:1904)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102== Address 0x83bd468 is 88 bytes inside a block of size 96 free'd
==17102== at 0x4A35F54: free (vg_replace_malloc.c:530)
==17102== by 0x4CCAC00: qfree (memory.c:129)
==17102== by 0x4D03DC6: route_node_destroy (table.c:501)
==17102== by 0x4D039EE: route_node_free (table.c:90)
==17102== by 0x4D03971: route_node_delete (table.c:382)
==17102== by 0x44D82A: route_unlock_node (table.h:256)
==17102== by 0x454617: rib_process_result (zebra_rib.c:1882)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102== Block was alloc'd at
==17102== at 0x4A36FF6: calloc (vg_replace_malloc.c:752)
==17102== by 0x4CCAA2D: qcalloc (memory.c:110)
==17102== by 0x4D03D88: route_node_create (table.c:489)
==17102== by 0x4D0360F: route_node_new (table.c:65)
==17102== by 0x4D034F8: route_node_set (table.c:74)
==17102== by 0x4D03486: route_node_get (table.c:327)
==17102== by 0x4CFB700: srcdest_rnode_get (srcdest_table.c:243)
==17102== by 0x4545C1: rib_process_result (zebra_rib.c:1872)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102==
This is happening because of this order of events:
1) Route is deleted in the main thread and scheduled for rib processing.
2) Rib garbage collection is run and we remove the route node since it
is no longer needed.
3) Data plane returns from the deletion in the kernel and we call
the srcdest_rnode_get function to get the prefix that was deleted.
This recreates a new route node. This creates a route_node with
a lock count of 1, which we freed via the route_unlock_node call.
Then we continued to use the rn pointer. Which leaves us with use
after frees.
The solution is, of course, to just move the unlock the node at the
end of the function if we have a route_node.
Fixes: #3854
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit: 6005fe55bc
Introduced a crash with zebra looking up either the
nbr structure or the mac structure. This is because
the zvni used is NULL and we eventually call a hash_lookup
call that would cause a NULL dereference. Partially
revert this commit to original behavior.
Problems found via clang Static Analyzer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
L3VNI keeps reference to svi interface (ifp).
When a netlink change received there is no flag
that mac has changed. Currently simply overwrite
interface's (ifp) hw_addr (MAC) field.
For originating EVPN type-2 and type-5 routes due to VNI
MAC change, comparison is required to check existing MAC
vs. netlink change MAC field.
Ticket:CM-23850
Reviewed By:CCR-8283
Testing Done:
Validate EVPN type-5 routes originated upon changing MAC address
of L3VNI's SVI inteface via ip link set cmd.
checked show bgp l2vpn evpn route and Rmac field contains new
MAC address.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
FRR is reporting that a lsp deletion event as a failure
in the log messsages. This will lead to confusion and
lots of fun debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
CLANG was throwing an error because struct rtadv_rdnss(dnssl) was being
initialized with = {0} instead of {}. Change to be the latter.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we schedule a packet for future handling, list the packet
type so that we can see what we are getting with debugs.
Also note which client and how many packets we received from that
client.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In Asymmetric and symetric routing scenario in EVPN
where each VTEP pair having different set of addresses
for the SVIs.
This knob allows reachability (ping connectivity) of
SVI IPs and resolve ARP resoultion VTEPs across racks.
This knob should not be used when same SVI IPs configured
on VTEPs across racks or when advertise default gateway
is configured.
Ticket:CM-23782
Testing Done:
Bring up EVPN symmetric routing topology with different
SVI IPs on different VTEPs. Enable advertise svi ip
at each VTEP, remote VTEPs installs arp entry for
SVI IPs via EVPN type-2 route exchange.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
With the data plane changes that were made, we are now running
nexthop tracking 2 times. Once at the end of meta-queue insertion
and once at the end of receiving a bunch of data from the dataplane.
The Addition of the data plane code caused flags to not be set
fully for the resolved routes( since we do not know the answer yet ),
This in turn caused the nexthop tracking run after the meta-queue
to think that the route was not `good`. This would cause it to
tell all interested parties that there was no nexthop.
After the dataplane insertion we are also no running nht code.
This was re-figuring out the nexthop correctly and also
correctly reporting to interested parties that there was a path again.
Example:
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, f - failed route
K>* 0.0.0.0/0 [0/103] via 10.50.11.1, enp0s3, 00:06:47
S>* 4.5.6.7/32 [1/0] via 192.168.209.1, enp0s8, 00:04:47
C>* 10.50.11.0/24 is directly connected, enp0s3, 00:06:47
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:06:47
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:06:47
donna.cumulusnetworks.com(config)# ip route 4.5.6.7/32 192.168.210.1
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, f - failed route
K>* 0.0.0.0/0 [0/103] via 10.50.11.1, enp0s3, 00:07:06
S>* 4.5.6.7/32 [1/0] via 192.168.209.1, enp0s8, 00:00:04
* via 192.168.210.1, enp0s9, 00:00:04
C>* 10.50.11.0/24 is directly connected, enp0s3, 00:07:06
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:07:06
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:07:06
donna.cumulusnetworks.com(config)#
Log files for sharp, which is watching 4.5.6.7:
2019/02/04 15:20:54.844288 SHARP: Received update for 4.5.6.7/32
2019/02/04 15:20:54.844820 SHARP: Received update for 4.5.6.7/32
2019/02/04 15:20:54.844836 SHARP: Nexthop 192.168.209.1, type: 2, ifindex: 3, vrf: 0, label_num: 0
2019/02/04 15:20:54.844853 SHARP: Nexthop 192.168.210.1, type: 2, ifindex: 4, vrf: 0, label_num: 0
As you can see we have received an update with no nexthops( invalid route )
and a second update immediately after it with 2 nexthops.
What's the big deal you say? Well we have code in other daemons that reacts
to not having a path for a nexthop. In BGP this will cause us to tear
down the peer. In staticd we'll remove the recursively resolved route.
In pim we'll remove all paths to the mroute. This is not desirable.
The fix is to remove the meta-queue run of nexthop tracking.
While running after data plane notice of routes to handle is not ideal
we will be fixing this in the future with the nexthop group code, which
should know what nexthops are affected by a nexthop group change.
Fixed code debug code:
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, f - failed route
K>* 0.0.0.0/0 [0/103] via 10.50.11.1, enp0s3, 00:00:46
S>* 4.5.6.7/32 [1/0] via 192.168.209.1, enp0s8, 00:00:02
C>* 10.50.11.0/24 is directly connected, enp0s3, 00:00:46
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:00:46
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:00:46
donna.cumulusnetworks.com(config)# ip route 4.5.6.7/32 192.168.210.1
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, f - failed route
K>* 0.0.0.0/0 [0/103] via 10.50.11.1, enp0s3, 00:00:59
S>* 4.5.6.7/32 [1/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
C>* 10.50.11.0/24 is directly connected, enp0s3, 00:00:59
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:00:59
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:00:59
2019/02/04 15:26:20.656395 SHARP: Received update for 4.5.6.7/32
2019/02/04 15:26:20.656440 SHARP: Nexthop 192.168.209.1, type: 2, ifindex: 3, vrf: 0, label_num: 0
2019/02/04 15:26:33.688251 SHARP: Received update for 4.5.6.7/32
2019/02/04 15:26:33.688322 SHARP: Nexthop 192.168.209.1, type: 2, ifindex: 3, vrf: 0, label_num: 0
2019/02/04 15:26:33.688329 SHARP: Nexthop 192.168.210.1, type: 2, ifindex: 4, vrf: 0, label_num: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The restricting of data about interfaces was both inconsistent
in application and allowed protocol developers to get into states where
they did not have the expected data about an interface that they
thought that they would. These restrictions and inconsistencies
keep causing bugs that have to be sorted through.
The latest iteration of this bug was that commit:
f20b478ef3
Has caused pim to not receive interface up notifications( but
it knows the interface is back in the vrf and it knows the
relevant ip addresses on the interface as they were changed
as part of an ifdown/ifup cycle ).
Remove this restriction and allow the interface events to
be propagated to all clients.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In Zebra , same update api called for all three add/delete/update operation.
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
The zebra.sock data is the listener socket for the zapi protocol.
The rest of the zebra router does not need to see this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The client_list should be owned by the zebra_router data structure
as that it is part of global state information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we get into rib_process_result and the operation we are handling
is DPLANE_OP_ROUTE_UPDATE *and* the route entry being looked at
is a route replace, we currently have no way to decode to the old_re
and the re due to how we have stored context. As such they are the
same pointer.
As such the route replace for the same route type is causing the re
to set the installed flag and then immediately unset the installed
flag, leaving us in a state where the kernel has the route but
the rib thinks we are not installed.
Since the true old_re( the one being replaced by the update operation )
is going away( as that it zebra deletes the old one for us already )
this fix is not optimal but will get us moving forward.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Read the onlink flag from the kernel for routes and pass them
up and through to zebra so that we are consistent with what
the kernel is telling us.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we receive a valid message from the kernel that
is either a kernel or system route, we should trust
that the route is legit and just use it.
Old behavior:
K * 172.22.0.0/15 [0/0] via 172.22.2.254, eva_dummy1 inactive, 00:00:16
New Behavior:
K>* 172.22.0.0/15 [0/0] via 172.22.2.254, eva_dummy1, 00:02:35
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route entry being displayed in debugs was displaying
the originating route type as a number. While numbers
are cool, I for one am not terribly interested in
memorizing them. Modify the (type %d) to a (%s) to
just list the string type of the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Apparently 'f' means both OpenFabric and a Failed kernel
route installation.
Let's switch the 'f' for the failed kernel route installation
to 'r - rejected route'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the nexthop->type is NEXTHOP_TYPE_IPV4_IFINDEX we
were writing the RTA_PREFSRC 2 times for the build_singlepath
and build_multipath functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some v6 attributes for the netlink_route_build_singlepath
code were being written two times for the NEXTHOP_TYPE_IPV6_IFINDEX
nexthop type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In extended-mobility case ({IP1, MAC} binding),
when a MAC moves from local to remote, binding
changes to {IP2, MAC}, local neigh (IP1) marked
as inactive in frr.
The evpn draft recommends to probe the entry once
local binding changes from local to remote.
Once the probe is set for the local neigh entry,
kernel will attempt refresh the entry via sending
unicast address resolution message, if host does not
reply, it will mark FAILED state.
For FAILED entry, kernel triggers delete neigh
request, which result in frr to remove inactive entry.
In absence of probing and aging out entry,
if MAC moves back to local with {IP3, MAC},
frr will mark both IP1 and IP3 as active and sends
type-2 update for both.
The IP1 may not be active host and still frr advertises
the route.
Ticket:CM-22864
Testing Done:
Validate the MAC mobilty in extended mobility scenario,
where local inactive entry gets removed once MAC moves
to remote state.
Once probe is set to the local entry, kernel triggers
reachability of the neigh/arp entry, since MAC moved remote,
ARP request goes to remote VTEP where host is not residing,
thus local neigh entry goes to failed state.
Frr receives neighbor delete faster and removes the entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The kernel neigh update api helps update neighbor entry,
using changing state and flags parameters.
Ticket:CM-22864
Reviewed By:
Testing Done:
Signed-off-by:Chirag Shah <chirag@cumulusnetworks.com>
ip rule configuration is being equipped with extra log information for
fwmark information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The ifa_flags value in the netlink message was originally a uint8_t
value. The linux kernel quickly ran out of 8 bits of data to
pass and the IFA_FLAGS value was added to the netlink message to allow
more than 8 bits of data to be passed. So replace the ifa_flags
with the IFA_FLAGS value if it exists in the interface netlink
message.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The onlink attribute was being passed from upper level protocols
as an attribute of the route *not* the individual nexthop. When
we pass this data to the kernel, we treat the onlink as a attribute
of the nexthop. This commit modifies the code base to allow
us to pass the ONLINK attribute as an attribute of the nexthop.
This commit also fixes static routes that have multiple nexthops
some onlink and some not.
ip route 4.5.6.7/32 192.168.41.1 eveth1 onlink
ip route 4.5.6.7/32 192.168.42.2
S>* 4.5.6.7/32 [1/0] via 192.168.41.1, eveth1 onlink, 00:03:04
* via 192.168.42.2, eveth2, 00:03:04
sharpd@robot ~/frr2> sudo ip netns exec EVA ip route show
4.5.6.7 proto 196 metric 20
nexthop via 192.168.41.1 dev eveth1 weight 1 onlink
nexthop via 192.168.42.2 dev eveth2 weight 1
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we process the dataplane data, keep track of whether or not a route
is in transit or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zebra is using NEXTHOP_FLAG_FIB as the basis of whether or not
a route_entry is installed. This is problematic in that we plan
to separate out nexthop handling from route installation. So modify
the code to keep track of whether or not a route_entry is installed/failed.
This basically means that every place we set/unset NEXTHOP_FLAG_FIB, we
actually also set/unset ROUTE_ENTRY_INSTALLED on the route_entry.
Additionally where we check for route installed via NEXTHOP_FLAG_FIB
switch over to checking if the route think's it is installed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are selecting nexthops for disply, abstract the notion
of what character we display to the end user about the status
of the nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we discover that a command given to the route add/delete
function in rt_socket.c is bogus, print out a debug message
but don't attempt to actually use a nexthop that we have not
figured out yet as part of the data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Just return right there, goto's are useful if you have common
code that needs to be cleaned up before exiting this function,
of which this function has none and there is only one goto.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Neigh detected duplicate detected during local update,
upon receiving kernel neigh delete, set neigh inactive
flag so BGPd can install remote route entry if present.
Only if freeze action enabled, local duplicate detected
entry will not be present in BGPd thus marking neigh
inactive is safe. BGPd will simply attempt install
remote entry if present.
Ticket:CM-23438
Testing Done:
Validated MAC-IP pair, trigger mobility of between two
VTEPs, upon local freeze perform neigh delete which
triggers BGP to install remote type-2 route into kernel.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A MACIP is detected as duplicate and after that
the host continue to move behind different VTEPs results
in local VTEP receiving remote mobility events.
In remote_macip_add, ensure to trigger dad if
MAC is marked as duplicate. In case of freeze
action enabled, is_dup_detect will be set to
avoids installing frozen MAC into kernel.
Ticket:CM-23649
Testing Done:
Configured detection action freeze with detection count
as 7 at DUT and >7 at remote VTEP,
trigger MAC-IP mobility between VTEPs.
once tdetection count reached, MAC detected as duplicate,
post detection move the host to remote. The local VTEP
receives remote macip add and entry is not installed into
kernel with fix.
root@VTEP1:~# net show evpn mac vni 1002 mac aa:aa:aa:aa:aa:aa
MAC: aa:aa:aa:aa:aa:aa
Remote VTEP: 27.0.0.16
Local Seq: 7 Remote Seq: 8
Duplicate, detected at Fri Jan 25 05:03:29 2019
Neighbors:
11.11.11.11 Inactive
Kernel entry still points to LOCAL
root@VTEP1:~# bridge fdb show | grep aa:aa:aa
aa:aa:aa:aa:aa:aa dev hostbond3 vlan 1002 master VxLanA-1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In a VRR/VRRP setup we can have connected routes with different costs.
So this change eliminates suppressing metric display for connected routes.
Sample output -
root@TORC11:~# vtysh -c "show ipv6 route vrf vrf1"
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP, F - PBR,
> - selected route, * - FIB route
VRF vrf1:
K * ::/0 [255/8192] unreachable (ICMP unreachable), 00:00:36
C * 2001:aa:1::/64 [0/100] is directly connected, vlan1002-v0, 00:00:36
C>* 2001:aa:1::/64 [0/90] is directly connected, vlan1002, 00:00:36
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
MACVLAN devices are typically used for applications such as VRR/VRRP that
require a second MAC address (virtual). These devices have a corresponding
SVI/VLAN device -
root@TORC11:~# ip addr show vlan1002
39: vlan1002@bridge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:02:00:00:00:2e brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::2/64 scope global
valid_lft forever preferred_lft forever
root@TORC11:~# ip addr show vlan1002-v0
40: vlan1002-v0@vlan1002: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:00:5e:00:01:01 brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::a/64 metric 1024 scope global
valid_lft forever preferred_lft forever
root@TORC11:~#
The macvlan device is used primarily for RX (VR-IP/VR-MAC). And TX is via
the SVI. To acheive that functionality the macvlan network's metric
is set to a higher value.
Zebra currently ignores the devaddr metric sent by the kernel and hardcodes
it to 0. This commit eliminates that hardcoding. If the devaddr metric
is available (METRIC_MAX) it is used for setting up the connected route
otherwise we fallback to the dev/interface metric.
Setting the macvlan metric to a higher value ensures that zebra will always
select the connected route on the SVI (and subsequently use it for next hop
resolution etc.) -
root@TORC11:~# vtysh -c "show ip route vrf vrf1 2001:aa:1::/64"
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 1024, vrf vrf1
Last update 11:30:56 ago
* directly connected, vlan1002-v0
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 0, vrf vrf1, best
Last update 11:30:56 ago
* directly connected, vlan1002
root@TORC11:~#
Ticket: CM-23511
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local neigh is added with a MAC that is remote or absent the
neigh is kept in zebra as local/in-active. But not propagated to bgpd.
Similarly when an inactive neigh is deleted the del-msg is not propagated
to bgpd.
Without this change bgp and zebra would fall out of sync as that
bgp would not know to rerun bestpath and for it to reinstall a
known remote path for the mac-ip in question. To fix this we
now propagate inactive neigh deletes to bgpd.
Ticket: CM-23018
Testing Done:
1. evpn-min
2. manually triggered the out-of-sync state and verified the fix
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The sequence number used should be unique and increase by 1
for netlink commands. This will allow the code to match
up batched commands to actual requests, so that we can signal
the failure correctly back.
So start the movement and tracking of sequence numbers as
an atomic uint32_t in zebra_router. Modify the dataplane
code to start tracking contexts from this value.
In future commits we will move more of the sequencing
data into using this value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were using dplane_ctx_get_status(ctx) and assigning that
value to zebra_dplane_status, not zebra_dplane_result( yeah what? )
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Finish the LSP update code for the async dataplane for
the openbsd platform. Remove synch apis now that we've
converted to the async code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Remove the last use of the pre-dataplane LSP update apis;
remove the stubs from the 'null' implementation file.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Start performing LSP updates through the async dataplane
subsystem. This is plumbed through for linux/netlink.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Adding infra to zebra dplane to support LSP updates. Add
kernel api for LSP updates that uses a dataplane context; add
stub apis for netlink, bsd, and 'null' kernel paths. Add
version of netlink mpls update code that takes a dplane
context struct instead of a zebra lsp struct.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add public versions of zebra apis that add NHLFEs to an LSP,
and that free NHLFEs. The dataplane code needs to capture/copy
NHLFEs in order to do async LSP programming.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move route info to a separate struct and use a union in the
dplane context to hold either route or lsp info. Add
accessors for LSP info.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
IPv6 uses AF_LINK to represent netmasks, this commit unbreaks
`rtm_read_mesg` that was broke on the `rta_get*` refactory.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 7a163a7c59)
IPv6 netmasks use AF_LINK family type and puts the correct amount of
set bits in the data structure. If we only copy the SDL header we
won't get all IPv6 address length, we must copy the whole extension of
the `sockaddr_in6` struct (which is provided in `destlen` parameter).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 691e903879)
Remove two unused functions in `zebra/rt_socket.c`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 914fea09d9)
`sockaddr` `len` field is the address type size and not the mask length.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit a6c0003182)
This is mostly to be consistent with the "show ip import-check"
command, which is very similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Favor usage of the afi_t enumeration to identify address-families
over using the classic AF_INET[6] constants for that. The choice to
use either of the two seems to be mostly arbitrary throughout our
code base, which leads to confusion and bugs like the one fixed by
commit 6f95d11a1. To address this problem, favor usage of the afi_t
enumeration whenever possible, since 1) it's an enumeration (helps
the compilers to catch some bugs), 2) has a safi_t sibling and 3)
can be used to index static arrays. AF_INET[6] should then be used
only when interfacing with the kernel or external libraries like
libc. The family2afi() and afi2family() functions can be used to
convert between the two different representations back and forth.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
`gate_buf` should be big enough to hold IPv6 addresses and `inet_ntop`
should be run in the correct `sockaddr` struct member.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Debug messages should use `prefix_buf` and `prefix2str` should only be
called once in `kernel_rtm`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add a new field in the ZEBRA_CAPABILITIES zapi message specifying
the VRF backend in use.
For simplicity, make the zclient code call vrf_configure_backend()
to apply the received value automatically instead of requiring
the daemons to do that themselves in their zebra_capabilities()
callbacks.
Additionally, call zebra_vrf_update_all() only after sending the
capabilities message to the client, so that it will know which VRF
backend is in use when processing the VRF messages.
This commit fixes a couple of bugs in the "interface" CLI command and
associated northbound callbacks, which behave differently depending
on the VRF backend in use. Before this commit, the vrf_backend
variable would always be set to VRF_BACKEND_NETNS in the client
daemons, even when zebra was started without the --vrfwnetns option.
This could lead to inconsistent behavior and subtle bugs under
specific circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We were sending ZEBRA_INTERFACE_LINK_PARAMS messages under the
following circumstances:
* New interface was created (via kernel or config);
* Interface went from down to up;
* Update in the link-params configuration.
Now also send ZEBRA_INTERFACE_LINK_PARAMS messages whenever a zclient
connects and sends a ZEBRA_INTERFACE_ADD request. Without this fix,
the client daemons don't receive interface link parameters if they
are configured in the zebra startup configuration.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
client->ifinfo is a VRF bitmap, hence we need to use
vrf_bitmap_check() to check if a client is subscribed to receive
interface information for a particular VRF. Just checking if
the client->ifinfo value is set will always succeed since it's
a pointer initialized by zserv_client_create(). With this fix,
we'll stop sending interface messages from all VRFs to all clients,
even those that didn't subscribe to it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Routes without nexthops don't make any sense, so we need to reject
them otherwise weird things can happen.
NOTE: blackhole routes aren't nexthop-less, they do have a single
nexthop of type NEXTHOP_TYPE_BLACKHOLE.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Future commits are going to introduce more rigor in
state setting in the case of received results from
the data plane. So let us move the DPLANE_OP_ROUTE_DELETE
state check to the same spot as the rest of the code that
is handling a particular operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the status flag from 8 bits to 32 bits and to add
a few new flags that will be used in future commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the meta_queue insertion such that we only enqueue
the route_node into one meta_queue instead of several.
Suppose we have multiple route_entries associated with
a particular node from rip, bgp, staticd. If we receive a
route update from rip, we would enqueue the route_node into
the 1, 2, 3 meta-nodes. Which means that we would run
the entire process of figuring out a route 3 times, while
nothing would change the second two times.
Modify the code to choose the lowest meta-queue and
install it into that one for processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a dataplane provider/plugin registers, return the new
handle/object - that's needed to use some provider apis
later on.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Pass lists of results back to zebra from the dataplane subsystem
(and pthread). This helps reduce the lock/unlock cycles when
zebra is busy. Also remove a couple of typedefs that made their
way into the dataplane header file - those violate the FRR style
guidelines.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
if the default vrf name is manually set, by passing -o parameter to
zebra, then this should be detected when walking the list of netns
available in the system. If a netns called vrf0 is present, then it
should be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when zebra is run, by using vrf netns backend mode, then the parser
detector of netns is run before forcing the default vrf to a possible
value. In that case, there is a possibility that the forced '-o' option
will create a second vrf with same name, whereas this option should be
there to uniquely have a default vrf with a value.
To make things consistent, the forced value will be priorised. Then, the
notifier will attempt to create vrf contexts. The expectation is that
the creation will fail, due to an already present vrf with same name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When an empty netmask a wrong end size is calculated, lets handle this
corner case to avoid spurious warning messages.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Handle corner case where a warning log message is issued on interface
address netmask handling with sockaddr type AF_LINK: it may come empty
or with match all (all 0xFF).
In the first case all lengths are zero and we only need to copy the
first bytes, second case it comes with a zero index and all 0xFF bytes.
In any case we only need to figure out a few of the first bytes instead
of all data.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When porting routing socket macro data handling to functions, the
attribute function was forgotten. The only difference between the
attribute and address handler is the family type check.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
"brief" output for "show interface" helps when we have to quickly check
important information like ip address, vrf etc. This prints
information in the easy to read tabular format. Currently it prints oper
status, ifname, vrf, ipv4 and ipv6 addresses.
Ticket: CM-9109
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
For neigh check duplicate flag as it can be inherited from
duplicate detected MAC (count could be 0).
Ticket:CM-23316
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Below are cases where EVPN duplicate detection
Freeze and Unfreeze required fixes:
Auto recovery needs to check neighbor's duplicate flag
to take action, as neigh could be marked duplicate
via inherited from MAC where IP detection count could be 0.
MAC duplicate detection needs to set flag to true
if freeze action is configured.
Local MAC add update should not send update to bgp
if MAC is in frozen state.
Remote MAC-IP update should not process neigh update if MAC
is detected as duplicate during remote update.
Ticket:CM-23344
Testing Done:
Trigger duplicate detection via both local and remote update trigger,
Validate clear command and other changes expected behavior.
Auto-recovery takes appropriate action on inherited IPs.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add the ability to retrieve the current role of mlag for this machine.
If mlag is not setup we will always return MLAG_ROLE_NONE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra_delete_rnh function is not needed to be exposed
to the entire world. Limit it's scope.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The deletion of a rnh is always proceeded by the same checks
to see if it is done. Just let zebra_delete_rnh do this test.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we call zebra_vrf_table_create, we've already created the info
pointer in zebra_router_get_table, so properly set the info->safi
and just store the zvrf->table[afi][safi] value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When handling events from /var/run/netns folder, if several netns are
removed at the same time, only the first one is deleted in the frr. Fix
this behaviour by applying continue in the loop.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Duplicate address detection should operate
at default vrf instance.
For mac and neigh show command, auto recovery and few places
where tanent vrf_id used for zvrf instead use default
vrf instance. Use vxlan_if's or VRF_DEFAULT vrf_id to
fetch zebra's default vrf instance.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
zebra uses the SIOCETHTOOL ioctl with the ETHTOOL_GSET command to
fetch the speed of interfaces from the kernel. The only problem is
that ETHTOOL_GSET returns EOPNOTSUPP when the given interface is a
virtual interface. This leads to zebra emitting warnings like this
at startup:
ZEBRA: IOCTL failure to read interface lo speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface dummy0 speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface ovs-system speed: 95 Operation not supported
Silence these warnings by ignoring EOPNOTSUPP errors, since we know
they are harmless. This is similar to how we handle EINVAL errors
from the BSD SIOCGIFMEDIA ioctl (commit c69f2c1ff).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route_info data structure already had a mapping of route type
to admin distance. Consolidate the meta_queue_map information
into this route_info data structure. This is to reduce the number
of places we need to remember to touch when adding a new routing
protocol.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
An EVPN type-2 entry is in freeze state during remote update,
remote VTEP can send typ-2 withdraw update,
upon receiving an entry delete (withdraw), first check
kernel has in local reachable state. Upon
unfreeze use the local entry to advertise to peers.
Fetch is for both MAC and IP, delete can come for
only MAC or MAC-IP combined route.
The specific entry fetch only required request flag to be set,
dump flag is not required.
Testing Done:
Simulate two VTEPs to do M1, IP1 mobility sequence,
freeze MAC during remote MAC update, subsequently send
withdraw type-2 route from origintating VTEP.
This results in read apis to invoke for local reachable entry.
Zebra updates its cache and upon unfreeze originates type-2.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Make netlink_request api generic where it can be used
for dump or querying specific information request.
nelink request nlm flags (NLM_F_ROOT | NLM_F_MATCH) are
used to dump purpose, if client wants to query spcific
MAC or IP using netlink_request does not require to set
them.
nlm struct is passed by the caller of netlink_request,
it can also set the nlm request flags.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This commit is the last missing piece to complete BGP LU support in bgpd. To this moment, bgpd (and zebra) supported auto label assignment only for prefixes leaked from VRFs to vpn and for MPLS SR prefixes. This adds auto label assignment to other routes types in bgpd. The following enhancements have been made:
* bgp_route.c:bgp_process_main_one() now sets implicit-null local_label to all local, aggregate and redistributed routes.
* bgp_route.c:bgp_process_main_one() now will request a label from the label pool for any prefix that loses the label for some reason (for example, when the static label assignment config is removed)
* bgp_label.c:bgp_reg_dereg_for_label() now requests labels from label pool for routes which have no associated label index
* zebra_mpls.c:zebra_mpls_fec_register() now expects both label and label_index from the calling function, one of which must be set to MPLS_INVALID_LABEL or MPLS_INVALID_LABEL_INDEX, based on this it will decide how to register the provided FEC.
Signed-off-by: Anton Degtyarev <anton@cumulusnetworks.com>
Reduce the zebra rib workqueue retry timeout, used when the queue
towards the zebra dataplane has reached its limit. Lowering the
value was reported to improve update throughput on some platforms.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The label processing for socket installs was not ensuring
that each nexthop would not accidently use the last
nexthops value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The test we were using to ensure that a mask was sent in
is a bit redundant, let's just always send it in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ADD/DELETE messages are the only ones we support, so leave
early from the function, in other words don't check it every
nexthop loop.
Additionally nexthops only care about non recursive active flags.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I'm going to rearrage the kernel_rtm_ipv4 and v6 functions
so the sin6_masklen needs to be moved a bit earlier.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The write function converted to v4 and v6 functions to a union sockunion
via casting. Just use `union sockunion` instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the ns deletion event to happen *after* the data validity
checks.
Please note this probably still leaves a weird hole if we receive
multiple namespace events ( as the for loop implies ). We will
stop handling anything after a namespace deletion notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the default vrf name was hardset to "Default", whereas the default vrf
name could have been configured in an other manner. Fix this
inconsistency.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the l3vni structure is allocated only once, since that structure is only
used for default netns. For that, move the initialisation part is moved
to a proper place, where there is no risk of attempting to initialise it
more than once, even when vrf backend is netns.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a route removal failure happens return to the installing
protocol that the route deletion failed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the zebra rib processing workqueue, set a small timeout
so that we will wait a short time if the queue into the
async dataplane is full. This helps avoid a situation where
the zebra main pthread constantly retries rib work without
giving the dataplane pthread a chance to make progress.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
NEXTHOP_FLAG_ACTIVE currently means that the nexthop is considered
good enough to be installed. With current ecmp restrictions this
translation from multipath_num is enforced in the data plane.
The problem with this is of course that every data plane now
becomes concerned about the multipath num and must enforce it
independently. Currently *bsd does not honor multipath_num at
all and linux marks all nexthops as being installed even when
it honors a multipath_num that is less than the total.
This code change moves the multipath_num enforcement from a dataplane
decision to a zebra nexthop decision. Thus dataplanes now can
just install those nexthops marked as NEXTHOP_FLAG_ACTIVE
without having to worry about multipath_num.
*BSD will now respect multipath_num and Linux now properly notes
which routes are actually installed or not:
sharpd@donna ~/f/t/topotests> ps -ef | grep frr
frr 6261 1556 0 09:12 ? 00:00:00 /usr/lib/frr/zebra -e 2 --daemon -A 127.0.0.1
frr 6279 1556 0 09:12 ? 00:00:00 /usr/lib/frr/staticd --daemon -A 127.0.0.1
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/106] via 10.0.2.2, enp0s3, 00:00:45
S>* 4.4.4.4/32 [1/0] via 10.0.2.1, enp0s3, 00:00:02
* via 192.168.209.1, enp0s8, 00:00:02
via 192.168.210.1, enp0s9 inactive, 00:00:02
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:00:45
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:00:45
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:00:45
donna.cumulusnetworks.com(config)#
sharpd@donna ~/f/t/topotests> ip route show
default via 10.0.2.2 dev enp0s3 proto dhcp metric 106
4.4.4.4 proto 196 metric 20
nexthop via 10.0.2.1 dev enp0s3 weight 1
nexthop via 192.168.209.1 dev enp0s8 weight 1
10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.15 metric 106
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown
192.168.209.0/24 dev enp0s8 proto kernel scope link src 192.168.209.2 metric 105
192.168.210.0/24 dev enp0s9 proto kernel scope link src 192.168.210.2 metric 103
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Stop creating individual, one-time events as each batch of
incoming zserv/zapi messages is processed - use a singleton
event so that the incoming message activity is more fair if
the zebra main pthread has other events to run.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We never used this information and it was merely stored.
Additionally this is not something that is a flag, it's
a status.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make the v4 and v6 code paths for rib_XXX calls in kernel_socket
as similiar as we can possibly make them. There is no need
for code duplication at this point in time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rib_lookup_ipv4_route function is only used in a debug path.
Is only used for v4 and only checks to make sure that the rib
and fib are in sync( which is not needed/used/supported on other
platforms ). So let's just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For nexthop handling use the actual resolved nexthop.
Nexthops are stored as a `special` list:
Suppose we have 3 way ecmp A, B, C:
nhop A -> resolves to nhop D
|
nhop B
|
nhop C -> resolves to nhop E
A and C are typically NEXTHOP_TYPE_IPV4( or 6 ) if they recursively resolve
We do not necessarily store the ifindex that this resolves to.
Current nexthop code only loops over A,B and C and uses those for
the zebra_rnh.c handling. So interested parties might receive non-fully
resolved nexthops( and they assume they are! ).
Let's convert the looping to go over all nexthops and only deal with
the resolved ones, so we will look at and use D,B and E.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `show ip route A.B.C.D json` command was only displaying
the last route entry looked at and we would drop the data
associated with other route entries. This fixes the issue:
robot# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/100] via 192.168.201.1, enp3s0, 00:13:31
C>* 4.50.50.50/32 is directly connected, lo, 00:13:31
D 10.0.0.1/32 [150/0] via 192.168.201.1, enp3s0, 00:09:46
S>* 10.0.0.1/32 [1/0] via 192.168.201.1, enp3s0, 00:10:04
C>* 192.168.201.0/24 is directly connected, enp3s0, 00:13:31
robot# show ip route 10.0.0.1 json
{
"10.0.0.1\/32":[
{
"prefix":"10.0.0.1\/32",
"protocol":"sharp",
"distance":150,
"metric":0,
"internalStatus":0,
"internalFlags":1,
"uptime":"00:09:50",
"nexthops":[
{
"flags":1,
"ip":"192.168.201.1",
"afi":"ipv4",
"interfaceIndex":2,
"interfaceName":"enp3s0",
"active":true
}
]
},
{
"prefix":"10.0.0.1\/32",
"protocol":"static",
"selected":true,
"distance":1,
"metric":0,
"internalStatus":0,
"internalFlags":2064,
"uptime":"00:10:08",
"nexthops":[
{
"flags":3,
"fib":true,
"ip":"192.168.201.1",
"afi":"ipv4",
"interfaceIndex":2,
"interfaceName":"enp3s0",
"active":true
}
]
}
]
}
robot#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using `SIOCGIFMEDIA` check for `EINVAL`, otherwise we might print
an error message on an unsupported interface.
FreeBSD source code reference:
https://github.com/freebsd/freebsd/blob/master/sys/net/if_media.c#L300
And:
8cb4b0c018/usr.sbin/rtsold/if.c (L211)
/*
* EINVAL simply means that the interface does not support
* the SIOCGIFMEDIA ioctl. We regard it alive.
*/
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some address types were not being skipped triggering a warning log
message, so lets refactor this code to properly handle known and unknown
types.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Move the declaration of ROUNDUP and ROUND_TYPE to outside of
`ifdef SA_SIZE`. We'll use these definitions in the next commit.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Clear dup address vni needs to return non-zero value
in case of command is not successful.
Ticket:CM-23122
Testing Done:
run clear command and check upon failure return code is non-zero.
root@TORS1:~# vtysh -c "clear evpn dup-addr vni 1000 ip 45.0.1.26"
% Requested IP's associated MAC 00:01:02:03:04:05 is still in duplicate
% state
root@TORS1:~# echo $?
1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Problem reported that kernel neighbor entries could end up in "FAILED"
state when the neighbor entry was deleted. This fix handles the
notification of the event from netlink messages and re-inserts the
deleted entry.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Always resend the nexthop information when we get a registration
event. Multiple daemons expect this information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Change helps display detailed output for all possible VNI neighbors
without specifying VNI and ip. It helps in troubleshooting as a single
command can be fired to capture detailed info on all VNIs.
Ticket: CM-22832
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8034
Change helps display detailed output for all possible VNI MACs without
specifying VNI or mac. It helps in troubleshooting - a single
command can be fired to capture detailed info on all VNIs.
Also fixed and existing json related bug where json object is created by
a parent function and freed in child function.
Ticket: CM-22832
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8028
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
the vrf context was not created at previous location of the call.
The call is done after vrf initialisation.
PR=61513
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Nicolas dichtel <nicolas.dichtel@6wind.com>
the netns discovery process executed when vrf backend is netns, allows
the zebra daemon to dynamically change the default vrf name value. This
option is disabled, when the zebra is forced to a default vrf value with
option -o.
PR=61513
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Change helps display detailed output for all possible VNIs without
specifying VNI. It helps in troubleshooting - a single command can
be fired to capture detailed info on all VNIs.
Ticket: CM-22831
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8013
To avoid conflicts between the zebra main pthread and the
dataplane pthread, use a separate routing socket (on non-netlink
platforms) for dataplane route updates to the OS.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a separate netlink socket for the dataplane's updates, to
avoid races between the dataplane pthread and the zebra main
pthread. Revise zebra shutdown so that the dataplane netlink
socket is cleaned-up later, after all shutdown-time dataplane
work has been done.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Improve, simplify dataplane provider locking apis. Add accessor
for dataplane pthread's thread_master, for use by providers who
need to use the thread/event apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Update the dataplane shutdown checks to include the providers.
Also revise the typedef for provider structs to make const
work.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Limit the number of updates processed from the incoming queue;
add more stats. Fill out apis for dataplane providers; convert
route update processing to provider model; move dataplane
status enum
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Display following Per MAC and Neigh's output:
If duplicate address detection is under process,
display detection start time and detection count.
If duplicate address detection detected an address
as duplicate, display detection time and duplicate
status.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The if_is_loopback() function is the right abstraction for identifying
loopback interfaces. There should be no reason for not using it in the
router-id code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the remote mac is deleted by bgpd we can end up with an auto mac
entry in zebra if there are neighs referring to the mac. The remote sequence
number in the auto mac entry needs to be reset to 0 as the mac entry may
have been removed on all VTEPs (including the originating one).
Now if the MAC comes back on a remote VTEP it may be added with MM=0 which
will NOT be accepted if the remote seq was not reset in the previous step.
Ticket: CM-22707
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
This is a fixup to commit -
f32ea5c07 - zebra: act on kernel notifications for remote neighbors
The original commit handled a race condition between kernel and zebra
that would result in an inconsistent state i.e.
kernel has an offload/remote neigh
zebra has a local neigh
The original commit missed setting the neigh to active when zebra
tried to resolve the inconsistency by modifying the local neigh to
remote neigh on hearing back its own kernel update. Fixed here.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-22700
When events cross paths between bgp and zebra bgpd could end up with a
dangling local MAC entry. Consider the following sequence of events on
rack-1 -
1. MAC1 has MM sequence number 1 and points to rack-3
2. Now a packet is rxed locally on rack-1 and rack-2 (simultaneously) with
source-mac=MAC1.
3. This would cause rack-1 and rack-2 to set the MM seq to 2 and
simultaneously report the MAC as local.
4. Now let's say on rack-1 zebra's MACIP_ADD is in bgpd's queue. bgpd
accepts rack-3's update and sends a remote MACIP add to zebra with MM=2.
5. zebra updates the MAC entry from local=>remote.
6. bgpd now processes zebra's "stale local" making it the best path.
However zebra no longer has a local MAC entry.
At this point bgpd and zebra are effectively out of sync i.e. bgpd has a
local-MAC which is not present in the kernel or in zebra.
To handle this window zebra should send a local MAC delete to bgpd on
modifying its cache to remote.
Ticket: CM-22687
Reviewed By: CCR-7935
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Current clang has an issue with the pointer/target argument
to at least one atomic/intrinsic. A variable with '_Atomic'
generates a compile-time error. Use a cast as a workaround
here to allow use of clang for now.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When the rib code is informed that a table is closing/
going away, only try once to uninstall associated routes from
the fib/dataplane. The close path can be called multiple times
in some cases - zebra shutdown, e.g.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Even if the neighbor entry we want already exists, force its
reinstallation to ensure that it's valid. This will now take place when
we request an update of the neighbor entry.
Ticket: CM-22604
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Recursive multipath nexthops were broken by the initial async
dataplane - we were trying to install an extra, invalid
nexthop.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The interface type can be a bond or a bond slave, add some
code to note this and to display it as part of a show interface
command.
Signed-off-by: Dinesh Dutt <didutt@gmail.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Correctly set safi to prevent duplicate allocations
* Free previously allocated table->info before overwriting it
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Avoid running the shutdown/sigint handler code more than once. With
the async dataplane, once shutdown has been initiated, the completion
of all async updates triggers final shutdown of the zebra main
pthread. During that time, avoid taking and processing a second
signal, such as SIGINT or SIGTERM.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Impose a configurable limit on the number of route updates
that can be queued towards the dataplane subsystem.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Dplane support for zebra's route cleanup during shutdown (clean
shutdown via SIGINT, anyway.) The dplane has the opportunity to
process incoming updates, and then triggers final cleanup
in zebra's main thread.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add first pass at show commands for the zebra dplane. Add some stats
counters to show. Start prep for correct shutdown processing, and for
multiple providers.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Correct use of netlink_parse_info() in the netlink fuzzing path.
Also clarify a couple of comments about pthreads.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We need a bit of special handling for system routes, which need
to be offered for redistribution even though they won't be
passing through the dplane system.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Initial WIP api to add providers into the zebra dataplane system,
with some simple ordering/prioritization.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Set SELECTED re immediately in rib_process, without expecting
that fib install has completed. Remove premature redistribute
call also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Slide netlink_talk_info into place to remove dependency on core
zebra structs; add accessors for dplane context block
Start init of route context from zebra core re and rn structs;
start queueing and event handling for incoming route updates.
Expose netlink apis that don't rely on zebra core structs;
add parallel route-update code path using the dplane ctx;
simplest possible event loop to process queued route'
updates.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we fail to install a route into bsd, note the case
where we have no viable nexthops installed for it, so
that we can know in zebra if the route is good or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _wrap_script inclusion implies a certain end functionality
of which we don't care. We just care that the hooks are called.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These three data structures belong in the `zebra_router` structure
as that they do not belong in `struct zebra_ns`.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move the rules_hash to the zrouter data structure and provide
the additional bit of work needed to lookup the rule based upon
the namespace id as well. Make the callers of functions not
care about what namespace id we are in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During a debugging session last night I discovered that I was
still having some `fun` figuring out why zebra was not making
a route's nexthop active. After some debugging I figured out
that I was missing some states that we could end up in that
didn't have debug information about what happened in nexthop_active.
Add the missing breadcrumbs for nexthop resolution. In addition
add a bit of code to notice the ebgp state without recursion turned
on and to let the user know about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
on some cases, kernel routes are not selected, because the kernel
suppressed it without informing the netlink layer that the route has
been suppressed ( for instance, when an interface goes down, the route
never goes back when interface goes up again). This commit intends to
suppress that entry from zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
The condition in the do/while is always false because 'return_nsid' cannot
reach the end of the loop with 'return_nsid' having a different value than
NS_UNKNOWN. Because of that, the condition can be replaced with 0 (false).
Also, the loop can be removed because the two assignments made at the end
of the loop before the condition check are not used (detected via Clang,
afterwards).
Signed-off-by: F. Aragon <paco@voltanet.io>
Conditional code in netlink_macfdb_update() introduced in 2232a77c used
the 'dst_present' variable because not all cases were covered. Now it is
not necessary.
Signed-off-by: F. Aragon <paco@voltanet.io>
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unnecesary redeclaration of already-defined enum 'dp_results' removed.
Can be detected via static analysis with e.g.
./configure CFLAGS=-Wgnu-redeclared-enum CC=clang
Signed-off-by: F. Aragon <paco@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All I can see is an unneccessary complication. If there's some purpose
here it needs to be documented...
Signed-off-by: David Lamparter <equinox@diac24.net>
When we receive a v6 RA packet with an optional
ND_OPT_SOURCE_LINKADDR take that data and construct the
v4 to v6 neighbor entry for that interface to allow
v4 w/ v6 nexthops to work with only global v6 addresses
on an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Abstract the mac neigh installation for 169.254.0.1 into
it's own function that we can pass the mac address into.
This will allow a future commit to use this functionality
when we have the appropriate mac address from reading
optional attributes of a RA packet.
Signed-off-by: Donald Sharp <sharpd@cumuusnetworks.com>
This change makes the zebra acting as label manager proxy not to relay non-LM
messages to clients that a zebra acting in non-proxy mode may send to it. Also,
the existing code does not schedule a rcv in case of relay_response_back
returns -1. This patch re-schedules reads on the socket even in case such a
function returns -1 by calling thread_add_read().
Signed-off-by: F. Aragon <paco@voltanet.io>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
The block comments from a couple commits were not following
proper style. Fix.
Fix SA warning that had snuck in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Netdevices are not sorted in any fashion by the kernel during the initial
interface nldump. So you can get an upper device (such as an SVI) before
its corresponding lower device (bridge).
To fix this problem we skip resolving link dependencies during handling of
nldump notifications. Resolving instead at the end (when all the devices
are present)
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ticket: CM-22388, CM-21796
Reviewed By: CCR-7845
Testing Done:
1. verified on a setup with missing linkages
2. automation - evpn-min
Ensure that when the is_router condition changes for a locally learnt
neighbor, it is informed to BGP only if it is active i.e., the MAC is
also locally learnt.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
1. Failed test
2. vxlan_routing_test.py
Use boolean variables instead of unsigned int for certain VxLAN-EVPN
flags which are really used as boolean.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
Along with a subsequent, related commit
When a remote MAC goes away, but there are neighbors referring to it,
ensure that when the last remote neighbor goes away, the MAC is
uninstalled from the kernel and no longer considered as remote.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22130
Reviewed By: CCR-7777
Testing Done:
1. Replicated failed scenario and verified with fix.
2. evpn-min
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
So the linux kernel uses the RT_TABLE_MAIN for the table
id used for ip routing. The multicast routing tables use
RT_TABLE_DEFAULT. We changed the internal code of zebra_vrf
a few months back to use RT_TABLE_MAIN as the tableid to
use. This caused the pim sg stats to stop working because
of the kernel bug where it uses a different table
for ip routing and ip multicast.
Put a bit of a special case in to do the right thing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging the mroute code path in zebra, add a bit of additional
data to allow us to know what is going on a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Newer linux kernels apparently send data down the netlink
bus for the creation of mroutes. Add a bit of code
to notice this and to handle it appropriately( ie do
nothing at this point in time ) as that the correct
place to do this is in the pim socket in pimd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are displaying data about a netlink message
in debugs or errors, print out the message type
as a string instead of a number.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were linking all libs and binaries against libprotobuf-c if the
option was enabled... that makes no sense at all.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Debugging inactive nexthops in zebra can be quite difficult
and non-obvious what has gone wrong. Add detailed rib
debugs for the cases where we decide that a nexthop is
inactive so that we can more easily debug a reason
for the failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _route_entry_dump function was not handling the nexthop as passed
in from an upper level protocol appropriate and as such not displaying
the v4/v6 nexthop right in the case where we have both going.
Additionally dump the nexthop vrf as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RB-Tree used to store rmac information was not properly
handling the v6 address family. Modify the code to allow
this handling.
Cleans up this error message:
zebra[2231]: host_rb_entry_compare: Unexpected family type: 10
That is being seen, This fixes some connectivity issues being seen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This crash occurs only with netns implementation.
vrf meaning is different regarging its implementation (netns or
vrf-lite)
- With vrf-lite implementation vrf is a property of the interface that
can be changed as the speed or the state (iproute2 command: "ip link
set dev IF_NAME master VRF_NAME"). All interfaces of the system are in
the same netns and so interface name is unique.
- With netns implementation vrf is a characteristic of the interface
that CANNOT be changed: it is the id of the netns where the interface
is located. To change the vrf of an interface (iproute2 command to
move an interface "ip netns exec VRF_NAME1 ip link set dev IF_NAME
netns VRF_NAME2") the interface is deleted from the old vrf and
created in the new vrf.
Interface name is not unique, the same name can be present in the
different netns (typically the lo interface) and search of interface
must be done by the tuple (interface name, netns id).
Current tests on the vrf implementation (vrf-lite or netns) are not
sufficient. In some cases (for example when an interface is moved from
a vrf X to the default vrf and then move back to VRF X) we can have a
corruption message and then a crash of zebra.
To avoid this corruption test on the vrf implementation, needed when an
interface changes, has been rewritten:
- For all interface changes except deletion the if_get_by_name function,
that checks if an interface exists and creates or updates it if
needed, is changed:
* The vrf-lite implementation is unchanged: search of the interface
is based only on the name and update the vrf-id if needed.
* The netns implementation search of the interface is based on the
(name, vrf-id) tuple and interface is created if not found, the
vrf-id is never updated.
- deletion of an interface (reception of a RTM_DELLINK netlink message):
* The vrf-lite implementation is unchanged: the interface
information are cleared and the interface is moved to the default
vrf if it does not belong to (to allow vrf deletion)
* The netns implementation is changed: only the interface
information are cleared and the interface stays in its vrf to
avoid conflict with interface with the same name in the default
vrf.
This implementation reverts (partially or totally):
commit 393ec5424e ("zebra: fix missing node attribute set in ifp")
commit e9e9b1150f ("lib: create interface even if name is the same")
commit 9373219c67 ("zebra: improve logs when replacing interface to an
other netns")
Fixes: b53686c52a ("zebra: delete interface that disappeared")
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when interface is a virtual ethernet interface, then there is no need to
update link pointer of interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There exists a possibility that the ifindex we are passed
does not exist and as such we should check for it not
resolving as part of the debug.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case the default netns has a netns path, then a new NETNS
creation will be bypassed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This function is changed so that the interface index is searched across
the correct namespace.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a header to cleanup no declaration and properly
wrapper some variables to appropriate #ifdef.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were ignoring mpls labels encapped with static routes.
Added support for single and multipath labels.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code prior to this change, was allowing clients to register
for nexthop tracking. Then zebra would look up the rnh and
send to that particular client any known data. Additionally
zebra was blindly re-evaluating the rnh for every registration.
This leads to interesting behavior in that all people registered
for that nexthop will get callbacks even if nothing changes.
Modify the code to know if we have evaluated the rnh or not
and if so limit the re-evaluation to when absolutely necessary
This is of particular importance to do because of nht callbacks
for protocols cause those protocols to do not insignificant
work and as more protocols are registering for nht callbacks
we will cause more work than is necessary.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These MIB OIDs were only used to identify clients on the SMUX protocol.
And even for that, they were essentially pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra/client_main.c code is not being maintained or used.
Remove from system. Especially since the encode/decode
zapi functionality it `purports` to be testing is deprecated
and now being removed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handle Remote Neigh entry state change from Router to Host.
Remote MAC-IP update may not continue EVPN NA Extended community,
Zebra need to accomodate if router_flag change for existing neigh
and install with or without Router Flag (R-bit).
Testing:
Have locally run MAC/IP (neigh entry) with R-bit set,
Checke on remote VTEP 'show bgp evpn route ...mac ip' and
'show evpn arp-cache ...' contians router flag.
Change host to remove R-bit, which locally learnt entry removes
Router flag. This results in remote vtep to remove R-bit from
neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Neigh update can have router_flag change, from unset to set and
viceversa. This is the case where MAC, IP and VLAN are same but
entry's flag moved from R to not R bit and reverse case.
Router flag change needs to trigger bgpd to inform all evpn peers
to remove from the evpn route.
Testing Done:
Send GARP with and without R bit from host and validate neigh entry
and evpn neigh and mac-ip route entry in zebra and bgpd.
Check Peer VTEP evpn route entry where router flag is (un)set.
With R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8 ND:Router
Flag
AddPath ID: RX 0, TX 1261
Last update: Wed Aug 15 20:52:14 2018
Without R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP2(uplink-2) (27.0.0.10)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8
AddPath ID: RX 0, TX 1263
Last update: Wed Aug 15 20:53:10 2018
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The neigh update can come prior to mac add update.
In this case, the mac will be auto created for the vni.
set router flag to local neigh update for mac with auto flag.
The neigh update will be informed to bgpd once local mac is learnt.
Unset router flag if the neigh update comes without the router flag
for an existing neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Enhance the EVPN MAC and Neighbor cache display to show additional
information such as the mobility sequence numbers and the state.
Ensure that the neighbor state is set in a couple of places so
that the display is correct.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement procedures similar to what is specified in
https://tools.ietf.org/html/draft-malhotra-bess-evpn-irb-extended-mobility
in order to support extended mobility scenarios in EVPN. These are scenarios
where a host/VM move results in a different (MAC,IP) binding from earlier.
For example, a host with an address assignment (IP1, MAC1) moves behind a
different PE (VTEP) and has an address assignment of (IP1, MAC2) or a host
with an address assignment (IP5, MAC5) has a different assignment of (IP6,
MAC5) after the move. Note that while these are described as "move" scenarios,
they also cover the situation when a VM is shut down and a new VM is spun up
at a different location that reuses the IP address or MAC address of the
earlier instance, but not both. Yet another scenario is a MAC change for an
attached host/VM i.e., when the MAC of an attached host changes from MAC1 to
MAC2. This is necessary because there may already be a non-zero sequence
number associated with MAC2. Also, even though (IP, MAC1) is withdrawn before
(IP, MAC2) is advertised, they may propagate through the network differently.
The procedures continue to rely on the MAC mobility extended community
specified in RFC 7432 and already supported by the implementation, but
augment it with a inheritance mechanism that understands the relationship
of the host MACIP (ARP/neighbor table entry) to the underlying MAC (MAC
forwarding database entry). In FRR, this relationship is understood by the
zebra component which doubles as the "host mobility manager", so the MAC
mobility sequence numbers are determined through interaction between bgpd
and zebra.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a host moves and is locally reachable, if the local neighbor event
is received before the local MAC event, flag the neighbor as inactive
just as would happen in the case of a new host. This ensures that the
MACIP route will get originated as soon as the local MAC event is got.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
* Added code for "match ipv6 address prefix list" command
* Added common function route_match_address_prefix_list() to process
routemap for AFI_IP and AFI_IP6 address family
Signed-off-by: kssoman <somanks@vmware.com>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
In order for connected routes to be installed the if_is_operative
function is called. This function checks the status of ptm
and decides to use ptm enabled/disabled on the interface.
The call to zebra_ptm_get_enable was returning true and causing
the interface subsystem to do the wrong thing. Modify the
internal bfd case to when checking for ptm enabled to say it
is not enabled.
Tested-by: Mark Stapp <mjs@voltanet.io>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The CMSG_FIRSTHDR was broken on solaris pre version 9. Version 9
was released in May of 2002 and EOL'ed in 2014. Version 8 EOL'ed
in 2012. Remove special case code for a little used platform
that has not seen the light of day in a very long time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We must hide only "pseudowire IFNAME" from vtysh, the "no" form of the
command should be made available to the extract.pl script. Split the
command into two to fix this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On `zebra` / `bfdd` shutdown we now clean up all client data to avoid
memory leaks (ghost clients). This also prevents 'slow' shutdown on
`zebra` sparing us from seeing some rare topotests shutdown failures
(signal handler getting stopped by signal).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This will make `bfdd` synchronize with its client when zebra dies or
bfdd is restarted.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When `bfdd` is enabled - which it is by default - re-route the PTM-BFD
messages to the FRR's internal BFD daemon instead of the external
PTM daemon.
This will help the migration of BFD implementations and avoid
duplicating code.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The client socket value can only be modified by the main thread.
Modifying the client socket from within the client I/O pthread
introduces race conditions.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Socket should be closed in zserv_client_free() and nowhere else.
Credit to Mark Stapp for catching this one.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rename some things to be less confusing
* Convert client close function to take a client struct rather than a
task
* Extern client close function and use it when handling SIGTERM
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of moving the static route handling to it's own daemon
allow zebra to accept static route types from upper level
protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
show evpn mac vni all
show evpn mac vni x
does not display local svi and anycast mac into count.
Ticket:CM-20456
Testing Done:
Before:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 4
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
dell-s6000-07#
After:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 6
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
The parameter was missing in that vty command. Then it is being added.
Also some documentation is refreshed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
NLMSG_NEXT decrements the buffer length (status) by
the header msg length (nlmsg_len) everytime its called.
If nlmsg_len isn't accurate and set to be larger than
what it should represent, it will cause status to
decrement passed 0. This makes NLMSG_NEXT return a
pointer that references an inaccessible address.
When that is passed to NLMSG_OK, it segfaults.
Add a check to verify that there is still something to read
before we try to.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Prefix length validation checks should be returning an error
rather than 0. Switch to that and make them error messages.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Change the fuzzing code so that it fakes data from
the listening socket rather than using its own pseudo one.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Commit a2ca67d1d2 consolidated IPv4 and IPv6 handling. It also applied
our ignorance for IPv4 srcdest routes onto IPv6.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Each ipset with port value monitors either src port or dst port.
The information is added to show pbr iptable commmand.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bad nexthop messages from netlink were causing zebra
to hang here. Added a check to verify the length
of the nexthop so it doesn't keep trying to read.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Some more address family filters we can safely ignore
as well as typos in logger. Added AF_MPLS as filterable.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra needed a check that varifies the prefix length
of an address is a valid length when receiving route
changes and interface address changes.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra needed a check for mtu from the message it
received from the kernel before adding the new link.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The zebra netlink socket was attempting to read netlink
messages with invalid address families in a couple areas.
Added filters and warn messages.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This code allows you to fuzz the netlink listening socket
in zebra by --enable-fuzzing and passing the -w [FILE]
option when running zebra.
File collection is stored in /var/run/frr/netlink_*
where each number is just a counter to keep the
files distinct.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
To keep configuration consistent, vrf that have not been able to be
associated with netns are removed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This test case happens in scenarios with mininet, where external netns
may be impossible for the local instance to be modified. The error is
ignored and the netns parsed is ignored too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
It was reported that "show ipv6 route vrf <vrfname>", "show ipv6 route
vrf <vrfname> ::/0 " or "show ipv6 route vrf <vrfname> json" all
displayed that the nexthop was in the default vrf. This was because
the kernel netlink messages would supply the RTA_OIF of the loopback
interface for the kernel-created default route for the vrf, where ipv4
did not supply any RTA_OIF. This fix suppresses the display if the
nexthop and route entry are in different vrfs and the nexthop is
NEXTHOP_TYPE_BLACKHOLE.
Ticket: CM-21722
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Kernel requests via netlink are synchronous.
Therefore we do not need to specify a need for a ACK and
we can make the netlink_cmd NONBLOCKING
1) If the netlink message is going to cause an error
we will still get one. Since results from the kernel
are synchronous we will get the error message on the
netlink_cmd socket and handle it
2) If the netlink message is going to send more than
one packet we will still get them all. Since the results
from the kernel are synchronous we will receive all data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When creating a netlink_socket, listen to error
codes and abandon ship if it crashes and burns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The fuzzing code was calling zebra_client_create which was refactored to zserv_client_create.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The search algorithm for interface based on ifindex only is adapted to
vrf netns based too. Only the default netns will be used to search the
interface index.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the interface lookup based on ifindex in the case the target vrf is
unknown is using the generic vrf api. Like that, in the case of vrf
based netns, the search across different netns other than the default
one are not searched.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The interface lookup algorithm is different according to if we are on
netns vrf or not. If we are on the former case, then we only have to
parse the interfaces of the netns, while if we are on the other case, we
have to parse all the interfaces of all the vrfs ( since index is not
overlapping in the latter case).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
SVI interface ip/hw address is advertised by the GW VTEP (say TORC11) with
the default-GW community. And the rxing VTEP (say TORC21) installs the GW
MAC as a dynamic FDB entry. The problem with this is a rogue packet from a
server with the GW MAC as source can cause a station move resulting in
TORC21 hijacking the GW MAC address and blackholing all inter rack traffic.
Fix is to make the GW MAC "sticky" pinning it to the GW VTEP (TORC11). This
commit does it by installing the FDB entry as static if the MACIP route is
received with the default-GW community (mimics handling of
mac-mobility-with-sticky community)
Sample output with from TORC12 with TORC11 setup as gateway -
root@TORC21:~# net show evpn mac vni 1004 mac 00:00:5e:00:01:01
MAC: 00:00:5e:00:01:01
Remote VTEP: 36.0.0.11 Remote-gateway Mac
Neighbors:
45.0.4.1
fe80::200:5eff:fe00:101
2001:fee1:0:4::1
root@TORC21:~# bridge fdb show |grep 00:00:5e:00:01:01|grep 1004
00:00:5e:00:01:01 dev vx-1004 vlan 1004 master bridge static
00:00:5e:00:01:01 dev vx-1004 dst 36.0.0.11 self static
root@TORC21:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ticket: CM-21508
While ZAPI I/O threads make a best effort to kill any scheduled tasks on
their threadmasters, after death another pthread can continue to
schedule onto the threadmaster. This isn't a problem per se since the
tasks will never run, but it also means that asserting that it hasn't
happened is pointless.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The warning given by PVS-Studio is related to per-element overflow (there is
no real overflow, because of how elements are mapped in the union). This
same warning is typically reported by Coverity, too.
Signed-off-by: F. Aragon <paco@voltanet.io>
Problem created by the fix for cm-21306 (inactive cross-vrf static routes
when vrfs were bounced.) Determined that in another case, that fix would
cause duplicate nexthops to appear in the table. Resolved the problem by
removing the vrf static route process from the zebra "add" process leaving
it in the zebra " if up" process as added in cm-21306 since that's the point
that the vrf device is now functional.
Ticket: CM-21429
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This correction fixes two bugs detected by Clang scan:
Bug Group: Dead store
Bug Type: Dead assignment
File: zebra/kernel_netlink.c
Function: netlink_parse_extended_ack
Line: 548
Bug Type: Dead increment
File: isisd/isis_lsp.c
Function: lsp_bits2string
Line: 625
Signed-off-by: F. Aragon <paco@voltanet.io>
incoming iptable entries with fragment parameter is handled.
An iptable context is created for each fragment value received from BGP.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The packet length is added to iptable zapi message.
Then the iptable structure is taking into account the pkt_len field.
The show pbr iptable command displays the packet length used if any.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The icmp type/code is displayed.
Also, the flags are correctly set in case ICMP protocol is elected.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When in a dev build add a bit of code to track max
depth of a fifo and to allow zebra to report on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an additional correction after 45981fda06 / PR #2462. I hope
this fixes the Coverity warning (I've added an additional check for ensuring
the string provided by the inotify read is zero-terminated).
Signed-off-by: F. Aragon <paco@voltanet.io>
When a filter function fails to work correctly, we get an
error message that something has gone wrong. Unfortunately
we may not have any clues as to where the decode failure
happened. Add a backtrace to give us a clue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a netlink message from the kernel we have
handler functions for when we send a netlink command, if these
return a failure ( < 0 ) then we output that we had a parse
issue. But if all we get is:
2018-06-21T23:47:45.298156+00:00 qct-ix1-08 zebra[1484]: netlink-cmd (NS 0) filter function error
Then it is not very useful to figure out *where* the error happened.
Add more error code when in a decode path to hopefully allow us
to figure out where this message is coming from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 7f61ea7bd4 in order
to avoid the TAINTED_SCALAR Coverity warning (ending in "Untrusted array
index read"). This is equivalent to the previous commit, but avoiding
pointer arithmetic with tainted variables.
Signed-off-by: F. Aragon <paco@voltanet.io>
Add code to request and read in extended ack information
to provide a bit more context of what went wrong when
a failure is detected in the kernel.
Example of a failed delete:
Jun 20 21:19:25 robot zebra[11878]: Extended Error: Invalid prefix for given prefix length
Jun 20 21:19:25 robot zebra[11878]: netlink-cmd (NS 0) error: Invalid argument, type=RTM_DELROUTE(25), seq=8, pid=4078403400
Jun 20 21:19:25 robot zebra[11878]: 0:4.3.2.0/24: Route Deletion failure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 32ac96b2ba, so
removing the forced string null termination doesn't involve a worse situation
than before (the underflow check should protect for the case of receiving
an incomplete buffer, which would be the cause of non-zero terminated string)
Signed-off-by: F. Aragon <paco@voltanet.io>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some basic code for zebra to start to keep track
of route-maps that have changed. At this point we
are not doing anything. As we fix code to handle
route-maps better, code will be shifted around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that if the vrf device is taken down and then brought
back up, any static route referencing that vrf device was not
re-installed. This fix runs back thru the static routes that
reference the vrf device coming up and re-install them.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Hide following l3vni config from DEFAULT_VRF instance
until it is fully supported.
TORS1(config)# vni 2222456 prefix-routes-only
Ticket:CM-20572
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Cleanup the zebra code to test for failure for reading
from stream once instead of once to see if we should
debug and once for the actual failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
New version of clang are detecting function parameters that we should
not be casting as such. Fix these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The IFLA_INFO_SLAVE_KIND constant is always defined now that we imported
our own copies of the Linux kernel headers. Remove the preprocessor
checks since they aren't necessary anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we have a host prefix, actually free the alloced memory
associated with it when we free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging code in redistribute.c, it is useful to output
the vrf we think the interface is in. So display it
when we are debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
That fix is a workaround from a vtysh limitation.
Because table identifier should be accessible in configuration only for
vrf netns backends, there was a need to differentiate the vty commands.
Unfortunately, vtysh parses the two commands without knowing which
command has really been installed.
Using one single vty command will avoid having this issue in vtysh.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, nothing is displayed. If vrf backend is linux network
namespaces, then "netns-based vrfs" is displayed, before dumping the
list of VRFs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In the case where vrf backend is netns, then the list of ns tables may
be extended. A single list is kept,but an attribute is added: the ns_id.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As table_id for VRF with netns backend is main table ( RT_TABLE_MAIN or
zebrad.rtm_table_default), this makes possible to return the table id
that wants to be configured for those cases. ( in addition to default
VRF). In other cases ( VRF Lite presumably), then vrf table_id is
returned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the table keyword for all ip route/ip mroute/ipv6 route commands
that are available. Also, the main structure is being added a table
identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I mistakenly used an external mechanism to cause a pthread to shut
itself down instead of using the one built into frr_pthread.[ch]. This
created a race condition whereby a pthread could schedule work onto a
dead pthread and cause it to reanimate.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Coalesce multiple write() syscalls into one
* Write larger chunks
* Decrease default read limit to 1000
* Remove unnecessary operations from hot loop (zserv_write)
* Move cross-schedule out of obuf lock
* Use atomic ops to update atomic variable
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Cancelling threads is nice but they can potentially be scheduled again
after cancellation without an explicit check.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Only one I/O task can be scheduled per file descriptor. Having two
separate tasks for buffer filling and buffer flushing was breaking that
invariant and causing messages to never be written.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Separate flush task from write task, so we can continue adding to the
write buffer while it's waiting to flush
* Handle write errors sooner rather than later
* Only schedule a process job if we have packets to process
* Tweak zserv_process_messages to not reschedule itself and rely on
zserv_read() to do so in all proper cases
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
