Somewhere along the line core-files stopped being generated
with the running of the topotests. With this change we now
see this:
sharpd@eva /t/topotests> find . -name '*.dmp' -print
./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
sharpd@eva /t/topotests> sudo gdb /usr/lib/frr/ospf6d ./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/lib/frr/ospf6d...
[New LWP 430478]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d --log file:ospf6d.log --log-level debug -d'.
Program terminated with signal SIGABRT, Aborted.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
(gdb)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Our topotests send SIGBUS 2 seconds after a SIGTERM is
initiated. This is bad because under a heavily loaded
topotest system we may have a case where the system has
not had a chance to properly shut down the daemon.
Extend the time greatly before topotests send SIGBUS.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modernize the test a bit, generate expected results rather than load from
file, and add a general json_cmp with retry function and use it.
Signed-off-by: Christian Hopps <chopps@labn.net>
- Fix xterm support to work, previously it mostly didn't, not it should
in all cases (i.e., single or dist mode).
- Catch when the user tries to use various window requiring topotests
features (e.g., --cli-on-error) but isn't running under supported
system (e.g., byobu/tmux/xterm), and fail the run with an explanation.
Signed-off-by: Christian Hopps <chopps@labn.net>
Refactor the bgp_auth test to create common_config code to allow
non-json based tests to reset routers and load configs in parallel.
Signed-off-by: Christian Hopps <chopps@labn.net>
TMUX and Screen support when running topotests inside docker. This
allows the gdb, shell and vtysh features to correctly work even when
running the tests inside docker.
Add options:
--asan-abort :: aborts the process on ASAN errors
--strace-daemons :: strace some or all daemons
Signed-off-by: Christian Hopps <chopps@labn.net>
The current log prints maximum wait time which is not actually correct,
because it doesn't include the command execution time. We usually have
"failed after X seconds" log with X being far longer than this maximum.
Let's print the maximum number of tries instead.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Pass the topogen 'tgen' object into the startRouterDaemons()
method. it can be used to start a debug cli immediately after
starting a daemon, and that can be handy.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When parsing the output of "ip -6 address", allow arbitrary base interface
names (the part after "@" in the interface name), not just "if0-9". Without
this, link-local addresses sometimes are attributed to the wrong interface
because we're not matching the interface name but still handle the
interface's addresses.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Prepare the infrastructure to allow configuring and launching an SNMP
daemon as part of testing scenario.
Signed-off-by: Babis Chalios <babis@voltanet.io>
Signed-off-by: Pat Ruddy Chalios <pat@voltanet.io>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Fix lib to start loggin to correct daemon file on startup
Fix bgp-auth tests for the logging changes
Fixes Issue # 7545
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Ensure the list of daemons to start is either the one specified
by a caller or the default one from the router configuration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Topotest for isis-vrf is added for ipv4 and ipv6.
2. Test case for checking isis topology.
3. Test case for checking zebra isis routes.
4. Test case for checking linux vrf routes.
5. 2 new API's written in topotest/lib for checking vrf routes.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Avoid unnecessary use of StringIO in one place, use version-
dependent method in another. Remove a couple of other py2->py3
problems.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
