config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Switch bgp and ripngd to use the new aggregate table and
route data structures. This was mainly a search and replace
operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit removes various parts of the bgpd implementation code which
are unused/useless, e.g. unused functions, unused variable
initializations, unused structs, ...
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The vrf 2 vrf route leaking auto-derives RD and RT and
installs the routes into the appropriate vpn table.
These routes when a operator configured ipv[4|6] vpn
neighbors were showing up off box. The RD and RT
values choosen are localy significant but globaly
useless and may cause confusion.
Put a special bit of code in to notice that we
should not be advertising these routes off box.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The return value of XCALLOC will always be non-null. Even if it were to
be null, this code would still crash with a NPD.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The work_queue_free function free'd up the wq pointer but
did not set it too NULL. This of course causes situations
where we may use the work_queue after it is freed. Let's
modify the work_queue to set the pointer for you.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Under a BGP VRF instance, prevent from entering in vrf-policy mode. This
mode is reserved for non VRF instances that want to handle several VRF
at the same time.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Modify mpls.h to rename MPLS_LABEL_ILLEGAL to be MPLS_LABEL_NONE.
Fix all pre-existing code that used MPLS_LABEL_ILLEGAL.
Modify the zapi vrf label message to use MPLS_LABEL_NONE as the
signal to remove label associated with a vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The VRF_DEFAULT parameter is incorrectly used. The 0 value for the bgp
instance is passed instead.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
fixup bgpd: fix compilation issue with bgpd
The multithreading code has a comment that reads:
"XXX: Heavy abuse of stream API. This needs a ring buffer."
This patch makes the relevant code use a ring buffer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Handle the return value of argv_find_and_parse_afi() to avoid passing
along bad values.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This is a possible buffer overflow.
We should always use the buffer size (whenever possible) to tell
functions what the size of the buffer is, instead of a hardcoded value.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The prefix_rd2str uses a buffer size of RD_ADDRSTRLEN.
Modify the code to consistently use this for all of BGP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
PREFIX_STRLEN is the correct length for buffers needed to output
a prefix2str. Additionally cleanup some setting of the last
value to a `\0` this is handled by prefix2str.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we ever turn off assertion for production builds
this code as written will cause a crash in that
the assignment will not happen.
Modify the code such that this erroneous assumption
cannot happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ignore the return value of some functions in the places we know they
can't fail, and other small fixes.
Regarding the change in bgpd/rfapi/rfapi_rib.c, asserting that
rfapiRaddr2Qprefix() didn't fail is the common idiom inside the rfapi
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Commit 8c9cc7bbf6 changed the size
of the `struct bgp_attr_encap_subtlv` type to be a zero length
array at the end instead of having a 1 byte. All memory allocations
for this subsuquently were off by 1 byte since those were not
adjusted either.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a fallout from PR #1022 (zapi consolidation). In the early days,
the client daemons would allocate enough memory to send all nexthops
to zebra. Then zebra would add all nexthops to the RIB and respect
MULTIPATH_NUM only when installing the routes in the kernel. Now things
are different and the client daemons can send at most MULTIPATH_NUM
nexthops to zebra, and failure to respect that will result in a buffer
overflow. The MULTIPATH_NUM limit in the new zebra API is a small price
we pay to avoid allocating memory for each route sent to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Change all callers of IPV4_ADDR_SAME() to pass a pointer to a struct in_addr
Use assignment and comparison instead of memcpy() and memcmp(). Avoids function
calls. Faster.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Core EVPN route handling functionality. This includes support for the
following:
- interface with zebra to learn about local VNIs and MACIPs as well as
to install remote VTEPs (per VNI) and remote MACIPs
- create/update/delete EVPN type-2 and type-3 routes
- attribute creation, route selection and install
- route handling per VNI and for the global routing table
- parsing of received EVPN routes and handling by route type
- encoding attributes for EVPN routes and EVPN prefix creation (for
Updates)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
route_node->parent and route_node->link shouldn't be touched by user
code since that is a recipe for trouble once we have a hash table in
parallel.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
it's just an alias for a millisecond timer used in exactly nine places
and serves only to complicate
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Pointer to void always points at the same thing so make it the type of
the thing that it points at
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... no need to have struct zlog generally-exposed.
A few files get to include log_int.h because they use zlog/vzlog.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
With the changed API, some adaptations are done in rfapi code, and in
bgpd evpn code. For evpn code, the internal storage of routermac addr is
kept as struct ethaddr structure. Also the evpn add_routermac api has as
incoming parameter a struct ethaddr param.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
