We make the assumption that ->attr is not NULL throughout
the code base. We are totally inconsistent about application
of this though.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP code assumes that the extra data is zero'ed out. Ensure that we
are not leaving any situation that the data on the stack is actually all
0's when we pass it around as a pointer later.
Please note in issue #5025, Lou reported a different valgrind
issue, which is not the same issue:
==7313== Conditional jump or move depends on uninitialised value(s)
==7313== at 0x181F9F: subgroup_announce_check (bgp_route.c:1555)
==7313== by 0x1A112B: subgroup_announce_table (bgp_updgrp_adv.c:641)
==7313== by 0x1A1340: subgroup_announce_route (bgp_updgrp_adv.c:704)
==7313== by 0x1A13E3: subgroup_coalesce_timer (bgp_updgrp_adv.c:331)
==7313== by 0x4EBA615: thread_call (thread.c:1531)
==7313== by 0x4E8AC37: frr_run (libfrr.c:1052)
==7313== by 0x1429E0: main (bgp_main.c:486)
==7313==
==7313== Conditional jump or move depends on uninitialised value(s)
==7313== at 0x201C0E: rfapi_vty_out_vncinfo (rfapi_vty.c:429)
==7313== by 0x18D0D6: route_vty_out (bgp_route.c:7481)
==7313== by 0x18DD76: bgp_show_table (bgp_route.c:9365)
==7313== by 0x1930C4: bgp_show_table_rd (bgp_route.c:9471)
==7313== by 0x1932A3: bgp_show (bgp_route.c:9510)
==7313== by 0x193E68: show_ip_bgp_json (bgp_route.c:10284)
==7313== by 0x4E6D024: cmd_execute_command_real.isra.2 (command.c:1072)
==7313== by 0x4E6F51E: cmd_execute_command (command.c:1131)
==7313== by 0x4E6F686: cmd_execute (command.c:1285)
==7313== by 0x4EBF9C4: vty_command (vty.c:516)
==7313== by 0x4EBFB9F: vty_execute (vty.c:1285)
==7313== by 0x4EC250F: vtysh_read (vty.c:2119)
==7313==
that is causing the actual crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Store in bgp_node the reason why we choose a particular
best path over another. At this point we do not do
anything other than just store this data when we make
the decision. Future commits will display it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This diff contains 2 parts:
1. Extract the tunnel type info from bgp extended communities.
2. Make rfapi use this common tunnel type ap
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The bgp_path_info_new function whenever it was called
pretty much duplicated the info_make function call. So
convert over to using it and remove the bgp_path_info_new
function so people are not tempted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit b4897fa5 introduced a call to decrement a route-map counter,
applied to a prefix-list in bgp_rfapi_cfg.c. This commit removes
that call.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In BGP , same update api called for all three add/delete/update operation .
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zclient->redist[afi][type] is a hash table and not an integer since a
while ago when VRF support was introduced. As such, zclient->redist[][]
should never be manipulated directly, the vrf_bitmap_*() helper functions
should be used instead. This fixes a few crashes found by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The routing table data structure can create intermediate route nodes
during its normal operation, so we always need to check if the 'info'
pointer of a route node is NULL or not before dereferencing it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The vnc_direct_del_rn_group_rd() function can be called with the 'afi'
parameter set to AFI_L2VPN on some specific cases. Remove the assert to
fix the crash.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Other parts of the rfapi code check if the 'rfg->rfapi_import_table'
pointer is NULL or not before using it. Do the same here to fix a crash
detected by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The rfapiDeleteRemotePrefixesIt() function checks on several places if
'p' is NULL or not. Introduce an additional NULL check to prevent a
crash from happening.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The rfapi code wasn't checking if strtoul() succeeded or not when parsing
the list of labels. Fix the affected commands by not allowing the user
to enter a non-numeric input.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Other parts of the rfapi code also check if these pointers are NULL or
not before using them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Switch bgp and ripngd to use the new aggregate table and
route data structures. This was mainly a search and replace
operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit removes various parts of the bgpd implementation code which
are unused/useless, e.g. unused functions, unused variable
initializations, unused structs, ...
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The vrf 2 vrf route leaking auto-derives RD and RT and
installs the routes into the appropriate vpn table.
These routes when a operator configured ipv[4|6] vpn
neighbors were showing up off box. The RD and RT
values choosen are localy significant but globaly
useless and may cause confusion.
Put a special bit of code in to notice that we
should not be advertising these routes off box.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The return value of XCALLOC will always be non-null. Even if it were to
be null, this code would still crash with a NPD.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The work_queue_free function free'd up the wq pointer but
did not set it too NULL. This of course causes situations
where we may use the work_queue after it is freed. Let's
modify the work_queue to set the pointer for you.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Under a BGP VRF instance, prevent from entering in vrf-policy mode. This
mode is reserved for non VRF instances that want to handle several VRF
at the same time.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Modify mpls.h to rename MPLS_LABEL_ILLEGAL to be MPLS_LABEL_NONE.
Fix all pre-existing code that used MPLS_LABEL_ILLEGAL.
Modify the zapi vrf label message to use MPLS_LABEL_NONE as the
signal to remove label associated with a vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The VRF_DEFAULT parameter is incorrectly used. The 0 value for the bgp
instance is passed instead.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
fixup bgpd: fix compilation issue with bgpd
The multithreading code has a comment that reads:
"XXX: Heavy abuse of stream API. This needs a ring buffer."
This patch makes the relevant code use a ring buffer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Handle the return value of argv_find_and_parse_afi() to avoid passing
along bad values.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
