This test is sometimes failing when it looks at the
v6 routes in the fib. Since the step before is
ensuring that v3 ospf has just converged let's
give it a bit of time to find and see if things
have had a chance to install the routes too.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test directory takes almost 7 minutes to complete splitting
this up into 3 test files drops it down to just over 3 minutes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Enhanced few exsiting PIM APIs to support both
IPv4 and IPv6 configuration. Added few new APIs
for PIMv6. Tested all existing tests with new
API changes.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
This tests checks that there are no errors when receiving BFD
packets over the various linux vrf interfaces. For example, if
an incoming packet is received by the wrong socket, a VRF
mismatch error would occur, and BFD flapping would be observed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
I rarely get this failure:
@classname: bgp_snmp_mplsl3vpn.test_bgp_snmp_mplsvpn
@name: test_pe1_converge_evpn
@time: 44.875
@message: AssertionError: BGP SNMP does not seem to be running
assert False
+ where False = <bound method SnmpTester.test_oid of <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>>('bgpVersion', '10')
+ where <bound method SnmpTester.test_oid of <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>> = <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>.test_oid
"Wait for protocol convergence"
tgen = get_topogen()
r1 = tgen.gears["r1"]
r1_snmp = SnmpTester(r1, "10.1.1.1", "public", "2c")
assertmsg = "BGP SNMP does not seem to be running"
> assert r1_snmp.test_oid("bgpVersion", "10"), assertmsg
E AssertionError: BGP SNMP does not seem to be running
E assert False
E + where False = <bound method SnmpTester.test_oid of <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>>('bgpVersion', '10')
E + where <bound method SnmpTester.test_oid of <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>> = <lib.snmptest.SnmpTester object at 0x7fa8562eb4f0>.test_oid
Under heavy system load a quick test before BGP can fully come up can result in a failed
test. Add some extra time for snmp to come up properly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test checks that when retain functionality is disabled,
some prefixes are removed from the BGP ipv4 vpn RIB.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- ignore parent from daemonize valgrind files these allocations will be
checked in the child.
- check for memleaks at end of module/file not just after tests.
Signed-off-by: Christian Hopps <chopps@labn.net>
API to verify static route was checking whether
router is installed with expected nexthop. In
this particular scenario we has same route as
Connected and Static both. In heavy loaded
system static routes was taking time to get
installed and API was doing the verification
on Connected route instead Static route.
Enhanced scripts to check only static routes.
Issue: https://github.com/FRRouting/frr/issues/11563
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
When there is change in route-map policy associated with default-originate, changes does not reflect.
When route-map associated with default-originate is deleted, default route doesn't get withdrawn
Update message is not being sent when only route-map is removed from the default-originate config.
SNT counter gets incremented on change of every policy associated with default-originate
Route-map with multiple match clauses causes inconsistencies with default-originate.
Default-originate behaviour on BGP-attributes
Signed-off-by: ARShreenidhi <rshreenidhi@vmware.com>
this commit containes 2 testcases that covers
1. Default originate behaviour on restarting the BGP daemon and FRR router
2. Default Originate behaviour on shut no-shutting the interface
Signed-off-by: ARShreenidhi <rshreenidhi@vmware.com>
Issue was reported by Donald, we were hitting
with key not found error and execution was
stopped, which is fixed by this PR.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
The bgp_conditional_advertisement topotest runs all the test cases in
the same function. It is not easy to debug it because the pytest
"--pause" argument does not make breaks between test cases.
Dispatch the test-cases into functions to benefit from the "--pause"
feature.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Before this patch we can enable 'ip ospf bfd' via '[no] ip ospf bfd profile ...' commads.
After patch '[no] ip ospf bfd profile ...' actual only if 'ip ospf bfd' is set.
Signed-off-by: Dmitrii Turlupov <dturlupov@factor-ts.ru>
Just adding a support for peer-groups, because now it's not possible to
configure BGP role for peer-groups.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
