When an interface does not have a mac address, don't
try to retrieve the mac address ( for it to just fail ).
Example interface:
sharpd@eva [2]> ip link show tun100
21: tun100@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/ipip 192.168.119.224 peer 192.168.119.120
Let's just notice that there is a NOARP flag and abort the call.
Fixes: #11733
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fixup both memory leaks as well as use after free's in nhg's
on shutdown.
This approach is effectively just iterating through all the
hash items and directly just freeing the memory instead
of handling ref counts or cross references.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Commit 35729f38fa introduced the idea of
holding a nexthop group for a small amount of time
before removing it from the system. When this code
was introduced the nexthop group entry was saved
and a timer started, except instead of stopping
processing at that point in time, zebra was
continuing on and deleting nexthop group entries
that that entry depended on as well. This
should not be done until the timer pops.
Fixes: #11596
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Current wording _implies_ `neighbor` updates are sent unicast; this makes it explicit.
Signed-off-by: Ben L <47653825+ad8-bdl@users.noreply.github.com>
RFC 4760 states we SHOULD ignore the NEXT_HOP attribute for BGP Update
messages carrying only MP_REACH_NLRI attributes. Thus we should use the
Network Address of Next Hop field of the MP_REACH_NLRI as the nexthop.
Instead of always looking for BGP_ATTR_NEXT_HOP, this commit ensures:
1) we set mp_nexthop_len to BGP_ATTR_NHLEN_IPV4 for v4 bgp_static routes
2) we check mp_nexthop_len when choosing the nexthop to use for nht
3) we check mp_nexthop_len when choosing the nexthop to send to zebra
4) we check mp_nexthop_len when picking the nexthop to shown by vtysh
Reported-by: Binon Gorbutt <binon@aervivo.com>
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Instead of changing the value of 'BUM flooding' field in
'show bgp l2vpn evpn vni' vty and JSON command from
'Head-end replication' to 'enabled', adding a new field named
'vxlanFlooding' to 'show bgp l2vpn evpn vni' vty and JSON output.
This is done to maintain backward compatibility.'BUM flooding' field
in vty and JSON output will be deprecated later.
Signed-off-by: Pooja Doijode <pdoijode@nvidia.com>
Move the logic to check the mp_nexthop_len against v6 lengths into its
own macro so we can apply that logic elsewhere on its own without always
checking for presence of BGP_ATTR_NEXT_HOP.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The problem here is when the same node is FHR as well as RP,
then the node keeps on sending the register packet.
Register-stop is not sent as well.
This problem has occurred because the RP is the same node
and there is no socket created on loopback interface, so the
packet is never send out and never received back on the same
node, so register recv could not be processed on the node and
hence no register-stop is sent.
Since register packets are unicast packets, its better to handle
the send of register packet via a separate register socket.
This fixes the problem mentioned above as well.
Fixes: #11331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
bgpd was crashing every time `show bgp l2vpn evpn route rd` was issued
with an RD that didn't match "all". This was introduced by 9b01d28988
which changed how argv_find() is handled in various vtysh commands, but
the new changes forgot a "!". So let's re-add the "!".
Before:
```
ub20# show bgp l2vpn evpn route rd 399672:100
vtysh: error reading from bgpd: Resource temporarily unavailable (11)Warning: closing connection to bgpd because of an I/O error!
ub20#
ub20# show bgp l2vpn evpn route rd 399672:100 mac 11:11:11:11:11:11
vtysh: error reading from bgpd: Resource temporarily unavailable (11)Warning: closing connection to bgpd because of an I/O error!
ub20#
```
After:
```
ub20# show bgp l2vpn evpn route rd 399672:100
ub20#
ub20# show bgp l2vpn evpn route rd 399672:100 mac 11:11:11:11:11:11
% Network not in table
ub20#
```
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The same as with prefix-list/route-maps/etc.
```
donatas-pc# show ip access-list spine
ZEBRA:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
BGP:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
PIM:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
BABELD:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
donatas-pc# show bgp ipv4 unicast access-list
ACCESSLIST_NAME Access-list name
spine
donatas-pc# show bgp ipv4 unicast access-list spine
BGP table version is 9, local router ID is 172.17.0.3, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 200.200.200.200/32
enp3s0 0 0 65000 3456 ?
Displayed 1 routes and 10 total paths
donatas-pc#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The test case is with `redirect-off` in evpn multi-homing environment:
```
evpn mh redirect-off
```
After the environment is setup, do the following steps:
1) Let one member of ES learn one mac:
```
2e:52:bb:bb:2f:46 dev ae1 vlan 100 master bridge0 static
```
Now everything is ok and the mac can be synced to other ES peers.
2) Shutdown bond1. At this time, zebra will get three netlink messages,
not one as current code expected. Like:
```
e4:f0:04:89:b6:46 dev vxlan10030 vlan 30 master bridge0 static <-A
e4:f0:04:89:b6:46 dev vxlan10030 nhid 536870913 self extern_learn <-B
e4:f0:04:89:b6:46 dev vxlan10030 vlan 30 self <-C
```
With A), zebra will wrongly remove this mac again:
```
ZEBRA: dpAdd remote MAC e4:f0:04:89:b6:46 VID 30
ZEBRA: Add/update remote MAC e4:f0:04:89:b6:46 intf vxlan10030(26) VNI 10030 flags 0xa01 - del local
ZEBRA: Send MACIP Del f None MAC e4:f0:04:89:b6:46 IP (null) seq 0 L2-VNI 10030 ESI - to bgp
```
With C), zebra will wrongly add this mac again:
```
ZEBRA: Rx RTM_NEWNEIGH AF_BRIDGE IF 26 VLAN 30 st 0x2 fl 0x2 MAC e4:f0:04:89:b6:46 nhg 0
ZEBRA: dpAdd remote MAC e4:f0:04:89:b6:46 VID 30
```
zebra should skip the two messages with `vid`. Otherwise, it will send many
*wrong* messages to bgpd, and the logic is wrong.
`nhg/dst` is in 2nd message without `vid`, it is useful to call
`zebra_evpn_add_update_local_mac()`. But it will fail with "could not find EVPN"
warning for no `vid`, can't call `zebra_evpn_add_update_local_mac()`:
With B):
```
ZEBRA: Rx RTM_NEWNEIGH AF_BRIDGE IF 26 st 0x2 fl 0x12 MAC e4:f0:04:89:b6:46 nhg 536870913
ZEBRA: dpAdd local-nw-MAC e4:f0:04:89:b6:46 VID 0
ZEBRA: Add/Update MAC e4:f0:04:89:b6:46 intf ae1(18) VID 0, could not find EVPN
```
Here, we can get `vid` from vxlan interface instead of from netlink message.
In summary, `zebra_vxlan_dp_network_mac_add()` will process the three messages
wrongly expecting only one messsage, so its logic is wrong. Just skip the two
unuseful messages with `vid`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
`struct prefix` is a superset of `struct prefix_ipv4` and
`struct prefix_ipv6`. Let's let coverity figure it out
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The format message checks done by clippy/xrelfo were still guarded
behind `--enable-dev-build`. They've been clean and reliable, so it's
time to enable them unconditionally.
Fixes: #11680
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
