frr(config-if)# ip igmp join 232.1.1.1 10.10.10.10
frr(config-if)# do sh ip igmp sources
Interface Address Group Source Timer Fwd Uptime
ens192 232.1.1.1 10.10.10.10 04:10 N 00:00:10
frr(config-if)#
The above output is misaligned and is having Address field which is not
required here.
Fixing it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The test is testing whether interface flaps are causing
the appropriate pim reactions. Unfortunately the test
is turning off the multicast stream and the test also
has a keep alive timer of 15 seconds set on all routers.
Which of course means the test has 15 seconds(at most) to finish
testing. This is not always possible given system loads.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test_multicast_pim_sm_topo3.py test is both spending extra time
looking for state that will never occurr but also generating a support
bundle when it doesn't find it. Fix the test to come to the correct
solution faster.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Correct flag name of `attr.es_flags` - ATTR_ES_L3_NHG_USE.
"bgp_path_info"s (Per "es-vrf") with this flag can use l3nhg.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
```
spine1-debian-11# sh ip bgp neighbors 192.168.0.1
BGP neighbor is 192.168.0.1, remote AS 65001, local AS 65000, external link
Hostname: exit1-debian-11
BGP version 4, remote router ID 192.168.10.123, local router ID 192.168.100.1
BGP state = Established, up for 00:00:32
Last read 00:00:30, Last write 00:00:30
Hold time is 180, keepalive interval is 60 seconds
Configured conditional advertisements interval is 5 seconds
Time until conditional advertisements begin is 4 seconds
```
```
"bgpTimerConfiguredConditionalAdvertisementsSec":5,
"bgpTimerUntilConditionalAdvertisementsSec":1,
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before:
```
spine1-debian-11(config-route-map)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
% Malformed communities attribute
```
After:
```
spine1-debian-11(config)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
spine1-debian-11(config-route-map)#
```
Same for large-communities.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a test case to ensure that Kernel routes are not lost
when there are multiple overlapping connected routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This bug should only really affect kernel routes. To reproduce:
a) Have multiple connected routes that point to the same prefix
swp8 up default 169.254.0.250/30
swp9 up default 169.254.0.250/30
b) Have a kernel route that uses one of those connected routes
7.6.2.8 via 169.254.0.249 dev swp8 proto static
(But have it choose a non-selected connected nexthop)
c) Introduce an event that causes the rib table to be reprocessed,
say a unrelated interface going up / down
This causes the route to be lost with this message:
2022/03/28 21:21:53 ZEBRA: [YXCJP-0WZWV] netlink_nexthop_msg_encode: ID (3454): 169.254.0.249, via swp8(1383) vrf default(0)
2022/03/28 21:21:53 ZEBRA: [YF2E6-J60JH] nexthop_active: 169.254.0.249, via swp8 given ifindex does not match nexthops ifindex found found: directly connected, swp9
Effectively the nexthop that zebra is choosing would not be the one
that the kernel route has choosen and FRR removes the route:
022/03/28 21:21:53 ZEBRA: [NM15X-X83N9] rib_process: (0:254):7.6.2.8/32: rn 0x56042e632e90, removing re 0x56042e6316e0
2022/03/28 21:21:53 ZEBRA: [Y53JX-CBC5H] rib_unlink: (0:254):7.6.2.8/32: rn 0x56042e632e90, re 0x56042e6316e0
2022/03/28 21:21:53 ZEBRA: [KT8QQ-45WQ0] rib_gc_dest: (0:?):7.6.2.8/32: removing dest from table
What is happening?
Zebra is not looking at all connected routes and if any of them
would have the appropriate ifindex and just blindly rejecting
the route.
So when nexthop resolution happens and it matches a connected
route and the dest->selected nexthop ifindex does not match, let's sort
through the rest of them and see if any of them match and if so
let's keep the route.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
I should've removed this in #10960. It's a hazard in terms of
forgetting to adjust PRs/other changes that might accidentally still
reference the field.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
vtysh_client_execute() expects just a string without a newline; the
newline is passed through and ends up in logging output where newlines
are not quite wanted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Just simple helpers to get a scope value, never-forward, and is-SSM for
a given address.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start a separate timer which does the sync with the RPKI manager until
returns the synced status.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Since additional information such as block_bits_length is needed to
generate SIDs properly, the type of elements in srv6_locator_chunks
list is extended from "struct prefix_ipv6 *" to
"struct srv6_locator_chunk *". Even in terms of variable name,
"struct srv6_locator_chunk *" is appropriate.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
