Re-evaluate the creation/deletion of groups when there is
a change in group type.
Issue: #10128
Co-authored-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Currently FRR creates an (S,G) PIM state when an IGMPv3
(S,G) join with INCLUDE mode is received for the ASM group.
Since it is an ASM group, we should not create (S,G) PIM state
and should not be sending PIM (S,G) joins towards the source.
This is a misconfiguration. So keep this group in IGMP table
and do not create PIM state.
Issue: #10128
Co-authored-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When an area-range command is applied in an ABR, the more specific prefixes
need to be removed.
r2# sh ipv6 ospf database
AS Scoped Link State Database
Type LSId AdvRouter Age SeqNum Payload
ASE 0.0.0.1 10.254.254.2 53 80000001 ::
ASE 0.0.0.2 10.254.254.2 51 80000001 2001:db8:1::/64
ASE 0.0.0.3 10.254.254.2 51 80000001 2001:db8:3::/64
ASE 0.0.0.4 10.254.254.2 51 80000001 2001:db8:2::/64
ASE 0.0.0.5 10.254.254.2 46 80000001 2001:db8:1::/64
ASE 0.0.0.6 10.254.254.2 46 80000001 2001:db8:3::/64
ASE 0.0.0.7 10.254.254.2 46 80000001 2001:db8:2::/64
ASE 0.0.0.8 10.254.254.2 41 80000001 2001:db8:3::/64
ASE 0.0.0.9 10.254.254.2 41 80000001 2001:db8:1000::1/128 <-- **
ASE 0.0.0.10 10.254.254.2 41 80000001 2001:db8:1000::2/128 <-- **
ASE 0.0.0.12 10.254.254.2 24 80000001 2001:db8:1000::/64
ASE 0.0.0.1 10.254.254.3 52 80000001 2001:db8:2::/64
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
... this shouldn't run for IPv6. (We'll switch to not using
IPV6_HDRINCL later, so the kernel will handle it, but for the time being
let's just stop trying to use the IPv4 code for IPv6.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When the connection goes up, the timer is not stopped and if we have a
subsequent GR event we have an old timer which is not as we expect.
Before:
```
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 95
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 08:27:53 2022
Time until Long-lived stale route deleted: 23 <<<<<<<<<<<<
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 103
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.0.1
65001 47583
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Last update: Mon Mar 28 08:43:29 2022
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 103
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 08:43:30 2022
Time until Long-lived stale route deleted: 17 <<<<<<<<<<<<<<<
```
After:
```
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 79
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (0.0.0.0)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 09:05:18 2022
Time until Long-lived stale route deleted: 24 <<<<<<<<<<<<<<<
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 87
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.0.1
65001 47583
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Last update: Mon Mar 28 09:05:25 2022
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 87
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 09:05:29 2022
Time until Long-lived stale route deleted: 29 <<<<<<<<<<<<<<
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Currently the PIM6d component is getting displayed under
"show ip prefix-list" instead of "show ipv6 prefix-list".
Fixed it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When a client disconnects, we need to check & remove NHT entries for
other SAFIs too. Otherwise we crash later trying to access stale data.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Small simplification for evpn RT commands, i.e. both per-VRF
and per-VNI - `bgp_evpn_vrf_rt_cmd` and `bgp_evpn_vni_rt_cmd`.
Just extract the duplicated code as a common code, there are
no functional changes.
Additionally correct one comment for `ecommunity_free()`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When babeld was switched over to the zapi
interface up/down callbacks the interface up
event was not properly put back in.
Fixes: #10893
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
These 3 values:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
Are defined based upon the number of seconds. Unfortunately doing math
on these values say something like:
days = t->tv_sec / ONE_DAY_SECOND;
Once you go over about a day causes the order of operations to cause the multiplication
to get messed up:
204 if (!t)
(gdb) n
207 w = d = h = m = ms = 0;
(gdb) set t->tv_sec = ONE_DAY_SECOND + 30
(gdb) n
208 memset(buf, 0, size);
(gdb)
210 us = t->tv_usec;
(gdb)
211 if (us >= 1000) {
(gdb)
212 ms = us / 1000;
(gdb)
213 us %= 1000;
(gdb)
217 if (ms >= 1000) {
(gdb)
222 if (t->tv_sec > ONE_WEEK_SECOND) {
(gdb)
227 if (t->tv_sec > ONE_DAY_SECOND) {
(gdb)
228 d = t->tv_sec / ONE_DAY_SECOND;
(gdb) n
229 t->tv_sec -= d * ONE_DAY_SECOND;
(gdb) n
232 if (t->tv_sec >= HOUR_IN_SECONDS) {
(gdb) p d
$6 = 2073600
(gdb) p t->tv_sec
$7 = -179158953570
(gdb)
Converting to adding paranthesis around around the ONE_DAY_SECOND causes
the order of operations to work as expected.
Fixes: #10880
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
```
spine1-debian-11(config-router)# bmp targets ?
BMPTARGETS Name of the BMP target group
ok test1
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The file m4/ax_lua.m4 needs to be a part of distribution, but it is not
inluded in the git repository by default becuase .gitignore file has a
wildcard for all *.m4 files, while individual files that must _not_ be
ignored are listed one by one as exceptions. ax_lua.m4 needs to be added
to this list of exceptions too.
One failure scenario is when you put a snapshot of the source tree in a
new git repository (e.g. the one used for a local CI/CD), this file is
not included in the repository, and subsequently build fails.
This commit adds the exception into m4/.gitignore file
Signed-off-by: Eugene Crosser <crosser@average.org>
`is_vni_param_configured()` is used to check whether RD/RT
configured for specific evpn vni.
There seems to be no need for this mixed check. No caller for
about 5 years, just remove it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
