The client socket value can only be modified by the main thread.
Modifying the client socket from within the client I/O pthread
introduces race conditions.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Socket should be closed in zserv_client_free() and nowhere else.
Credit to Mark Stapp for catching this one.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rename some things to be less confusing
* Convert client close function to take a client struct rather than a
task
* Extern client close function and use it when handling SIGTERM
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of moving the static route handling to it's own daemon
allow zebra to accept static route types from upper level
protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
show evpn mac vni all
show evpn mac vni x
does not display local svi and anycast mac into count.
Ticket:CM-20456
Testing Done:
Before:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 4
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
dell-s6000-07#
After:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 6
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
The parameter was missing in that vty command. Then it is being added.
Also some documentation is refreshed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
NLMSG_NEXT decrements the buffer length (status) by
the header msg length (nlmsg_len) everytime its called.
If nlmsg_len isn't accurate and set to be larger than
what it should represent, it will cause status to
decrement passed 0. This makes NLMSG_NEXT return a
pointer that references an inaccessible address.
When that is passed to NLMSG_OK, it segfaults.
Add a check to verify that there is still something to read
before we try to.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Prefix length validation checks should be returning an error
rather than 0. Switch to that and make them error messages.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Change the fuzzing code so that it fakes data from
the listening socket rather than using its own pseudo one.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Commit a2ca67d1d2 consolidated IPv4 and IPv6 handling. It also applied
our ignorance for IPv4 srcdest routes onto IPv6.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Each ipset with port value monitors either src port or dst port.
The information is added to show pbr iptable commmand.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bad nexthop messages from netlink were causing zebra
to hang here. Added a check to verify the length
of the nexthop so it doesn't keep trying to read.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Some more address family filters we can safely ignore
as well as typos in logger. Added AF_MPLS as filterable.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra needed a check that varifies the prefix length
of an address is a valid length when receiving route
changes and interface address changes.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra needed a check for mtu from the message it
received from the kernel before adding the new link.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The zebra netlink socket was attempting to read netlink
messages with invalid address families in a couple areas.
Added filters and warn messages.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This code allows you to fuzz the netlink listening socket
in zebra by --enable-fuzzing and passing the -w [FILE]
option when running zebra.
File collection is stored in /var/run/frr/netlink_*
where each number is just a counter to keep the
files distinct.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
To keep configuration consistent, vrf that have not been able to be
associated with netns are removed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This test case happens in scenarios with mininet, where external netns
may be impossible for the local instance to be modified. The error is
ignored and the netns parsed is ignored too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
It was reported that "show ipv6 route vrf <vrfname>", "show ipv6 route
vrf <vrfname> ::/0 " or "show ipv6 route vrf <vrfname> json" all
displayed that the nexthop was in the default vrf. This was because
the kernel netlink messages would supply the RTA_OIF of the loopback
interface for the kernel-created default route for the vrf, where ipv4
did not supply any RTA_OIF. This fix suppresses the display if the
nexthop and route entry are in different vrfs and the nexthop is
NEXTHOP_TYPE_BLACKHOLE.
Ticket: CM-21722
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Kernel requests via netlink are synchronous.
Therefore we do not need to specify a need for a ACK and
we can make the netlink_cmd NONBLOCKING
1) If the netlink message is going to cause an error
we will still get one. Since results from the kernel
are synchronous we will get the error message on the
netlink_cmd socket and handle it
2) If the netlink message is going to send more than
one packet we will still get them all. Since the results
from the kernel are synchronous we will receive all data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When creating a netlink_socket, listen to error
codes and abandon ship if it crashes and burns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The fuzzing code was calling zebra_client_create which was refactored to zserv_client_create.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The search algorithm for interface based on ifindex only is adapted to
vrf netns based too. Only the default netns will be used to search the
interface index.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the interface lookup based on ifindex in the case the target vrf is
unknown is using the generic vrf api. Like that, in the case of vrf
based netns, the search across different netns other than the default
one are not searched.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The interface lookup algorithm is different according to if we are on
netns vrf or not. If we are on the former case, then we only have to
parse the interfaces of the netns, while if we are on the other case, we
have to parse all the interfaces of all the vrfs ( since index is not
overlapping in the latter case).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
SVI interface ip/hw address is advertised by the GW VTEP (say TORC11) with
the default-GW community. And the rxing VTEP (say TORC21) installs the GW
MAC as a dynamic FDB entry. The problem with this is a rogue packet from a
server with the GW MAC as source can cause a station move resulting in
TORC21 hijacking the GW MAC address and blackholing all inter rack traffic.
Fix is to make the GW MAC "sticky" pinning it to the GW VTEP (TORC11). This
commit does it by installing the FDB entry as static if the MACIP route is
received with the default-GW community (mimics handling of
mac-mobility-with-sticky community)
Sample output with from TORC12 with TORC11 setup as gateway -
root@TORC21:~# net show evpn mac vni 1004 mac 00:00:5e:00:01:01
MAC: 00:00:5e:00:01:01
Remote VTEP: 36.0.0.11 Remote-gateway Mac
Neighbors:
45.0.4.1
fe80::200:5eff:fe00:101
2001:fee1:0:4::1
root@TORC21:~# bridge fdb show |grep 00:00:5e:00:01:01|grep 1004
00:00:5e:00:01:01 dev vx-1004 vlan 1004 master bridge static
00:00:5e:00:01:01 dev vx-1004 dst 36.0.0.11 self static
root@TORC21:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ticket: CM-21508
While ZAPI I/O threads make a best effort to kill any scheduled tasks on
their threadmasters, after death another pthread can continue to
schedule onto the threadmaster. This isn't a problem per se since the
tasks will never run, but it also means that asserting that it hasn't
happened is pointless.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The warning given by PVS-Studio is related to per-element overflow (there is
no real overflow, because of how elements are mapped in the union). This
same warning is typically reported by Coverity, too.
Signed-off-by: F. Aragon <paco@voltanet.io>
Problem created by the fix for cm-21306 (inactive cross-vrf static routes
when vrfs were bounced.) Determined that in another case, that fix would
cause duplicate nexthops to appear in the table. Resolved the problem by
removing the vrf static route process from the zebra "add" process leaving
it in the zebra " if up" process as added in cm-21306 since that's the point
that the vrf device is now functional.
Ticket: CM-21429
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This correction fixes two bugs detected by Clang scan:
Bug Group: Dead store
Bug Type: Dead assignment
File: zebra/kernel_netlink.c
Function: netlink_parse_extended_ack
Line: 548
Bug Type: Dead increment
File: isisd/isis_lsp.c
Function: lsp_bits2string
Line: 625
Signed-off-by: F. Aragon <paco@voltanet.io>
incoming iptable entries with fragment parameter is handled.
An iptable context is created for each fragment value received from BGP.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The packet length is added to iptable zapi message.
Then the iptable structure is taking into account the pkt_len field.
The show pbr iptable command displays the packet length used if any.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The icmp type/code is displayed.
Also, the flags are correctly set in case ICMP protocol is elected.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When in a dev build add a bit of code to track max
depth of a fifo and to allow zebra to report on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an additional correction after 45981fda06 / PR #2462. I hope
this fixes the Coverity warning (I've added an additional check for ensuring
the string provided by the inotify read is zero-terminated).
Signed-off-by: F. Aragon <paco@voltanet.io>
When a filter function fails to work correctly, we get an
error message that something has gone wrong. Unfortunately
we may not have any clues as to where the decode failure
happened. Add a backtrace to give us a clue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a netlink message from the kernel we have
handler functions for when we send a netlink command, if these
return a failure ( < 0 ) then we output that we had a parse
issue. But if all we get is:
2018-06-21T23:47:45.298156+00:00 qct-ix1-08 zebra[1484]: netlink-cmd (NS 0) filter function error
Then it is not very useful to figure out *where* the error happened.
Add more error code when in a decode path to hopefully allow us
to figure out where this message is coming from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 7f61ea7bd4 in order
to avoid the TAINTED_SCALAR Coverity warning (ending in "Untrusted array
index read"). This is equivalent to the previous commit, but avoiding
pointer arithmetic with tainted variables.
Signed-off-by: F. Aragon <paco@voltanet.io>
Add code to request and read in extended ack information
to provide a bit more context of what went wrong when
a failure is detected in the kernel.
Example of a failed delete:
Jun 20 21:19:25 robot zebra[11878]: Extended Error: Invalid prefix for given prefix length
Jun 20 21:19:25 robot zebra[11878]: netlink-cmd (NS 0) error: Invalid argument, type=RTM_DELROUTE(25), seq=8, pid=4078403400
Jun 20 21:19:25 robot zebra[11878]: 0:4.3.2.0/24: Route Deletion failure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 32ac96b2ba, so
removing the forced string null termination doesn't involve a worse situation
than before (the underflow check should protect for the case of receiving
an incomplete buffer, which would be the cause of non-zero terminated string)
Signed-off-by: F. Aragon <paco@voltanet.io>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some basic code for zebra to start to keep track
of route-maps that have changed. At this point we
are not doing anything. As we fix code to handle
route-maps better, code will be shifted around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that if the vrf device is taken down and then brought
back up, any static route referencing that vrf device was not
re-installed. This fix runs back thru the static routes that
reference the vrf device coming up and re-install them.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Hide following l3vni config from DEFAULT_VRF instance
until it is fully supported.
TORS1(config)# vni 2222456 prefix-routes-only
Ticket:CM-20572
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Cleanup the zebra code to test for failure for reading
from stream once instead of once to see if we should
debug and once for the actual failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
New version of clang are detecting function parameters that we should
not be casting as such. Fix these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The IFLA_INFO_SLAVE_KIND constant is always defined now that we imported
our own copies of the Linux kernel headers. Remove the preprocessor
checks since they aren't necessary anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we have a host prefix, actually free the alloced memory
associated with it when we free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging code in redistribute.c, it is useful to output
the vrf we think the interface is in. So display it
when we are debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
That fix is a workaround from a vtysh limitation.
Because table identifier should be accessible in configuration only for
vrf netns backends, there was a need to differentiate the vty commands.
Unfortunately, vtysh parses the two commands without knowing which
command has really been installed.
Using one single vty command will avoid having this issue in vtysh.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, nothing is displayed. If vrf backend is linux network
namespaces, then "netns-based vrfs" is displayed, before dumping the
list of VRFs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In the case where vrf backend is netns, then the list of ns tables may
be extended. A single list is kept,but an attribute is added: the ns_id.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As table_id for VRF with netns backend is main table ( RT_TABLE_MAIN or
zebrad.rtm_table_default), this makes possible to return the table id
that wants to be configured for those cases. ( in addition to default
VRF). In other cases ( VRF Lite presumably), then vrf table_id is
returned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the table keyword for all ip route/ip mroute/ipv6 route commands
that are available. Also, the main structure is being added a table
identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I mistakenly used an external mechanism to cause a pthread to shut
itself down instead of using the one built into frr_pthread.[ch]. This
created a race condition whereby a pthread could schedule work onto a
dead pthread and cause it to reanimate.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Coalesce multiple write() syscalls into one
* Write larger chunks
* Decrease default read limit to 1000
* Remove unnecessary operations from hot loop (zserv_write)
* Move cross-schedule out of obuf lock
* Use atomic ops to update atomic variable
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Cancelling threads is nice but they can potentially be scheduled again
after cancellation without an explicit check.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Only one I/O task can be scheduled per file descriptor. Having two
separate tasks for buffer filling and buffer flushing was breaking that
invariant and causing messages to never be written.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Separate flush task from write task, so we can continue adding to the
write buffer while it's waiting to flush
* Handle write errors sooner rather than later
* Only schedule a process job if we have packets to process
* Tweak zserv_process_messages to not reschedule itself and rely on
zserv_read() to do so in all proper cases
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Label manager reaches its hands into session / IO code for zserv for
whatever reason, gotta handle that.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Simplify zapi_msg <-> zserv interaction
* Remove header validity checks, as they're already performed before the
packet ever makes it here
* Perform the same kind of batch processing done in zserv_write by
copying multiple inbound packets under lock instead of doing serial
locking
* Perform self-scheduling under the same lock
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Dequeue all pending messages when writing and push them all into the
write buffer. This removes the necessity to self-schedule, avoiding a
mutex lock, and should also maximize throughput by not writing 1 packet
per job.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Increase the maximum number of packets to read per read job
* Store read packets in a local cached buffer to avoid mutex overhead
* Only update last-read time / last-command if we actually read a packet
* Add missing log line for corrupt header case
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add centralized thread scheduling dispatchers for client threads and
the main thread
* Rename everything in zserv.c to stop using a combination of:
- zebra_server_*
- zebra_*
- zserv_*
Everything in zserv.c now begins with zserv_*.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Since it is already quite difficult to understand the various pieces
going on here, I reorganized the file to make it much cleaner and easier
to understand. The organization is now:
zserv.c:
,---------------------------------.
/ include statements |
| ... |
| ... |
| -------------------------------- |
| Client pthread server functions |
| ... |
| ... |
| -------------------------------- |
| Main pthread server functions |
| ... |
| ... |
| -------------------------------- |
| CLI commands, other |
| ... |
| ... |
\_________________________________/
No code has been changed; the functions have merely been moved around.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Time counters need to use atomic access between threads
* After a client disconnects, we properly kill the thread but need to
free its frr_pthread as well
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add doc comments explaining hairy bits of thread lifecycle
* Remove t_suicide as it no longer makes sense
* Remove client double-free
* Remove unnecessary THREAD_OFF being used in incorrect pthread context
* Eliminate unnecessary racey access to client's obuf_fifo
* Ensure zserv_process_messages() reschedules itself if it has not
finished its work
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we receive a route that we think we own and we
are not in startup conditions, then add a small debug
to help debug the issue when this happens, instead
of silently just ignoring the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The re-use of RTPROT_STATIC has caused too many collisions
where other legitimate route sources are causing us to
believe we are the originator of the route. Modify
the code so that if another protocol inserts RTPROT_STATIC
we will assume it's a Kernel Route.
Fixes: #2293
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With:
commit ba7773964c
Author: Renato Westphal <renato@opensourcerouting.org>
Date: Wed Sep 20 22:12:56 2017 -0300
We added our own copy of if_link.h (among others). This
file unconditionally defines IFLA_WIRELESS, so we don't need
the conditional defines in the if_netlink.c code...
Issue: https://github.com/FRRouting/frr/issues/2299
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
After PBR or BGP sends back a request for sending a rule/ipset/ipset
entry/iptable delete, there may be issue in deleting it. A notification
is sent back with a new value indicating that the removal failed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This hook can be used if the plugin module wrap_script is used.
This hook is called to dump the debugging status of this module, on the
vty.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following PBR handlers: ipset, and iptables will prioritary
call the hook from a possible plugin.
If a plugin is attached, then it will return a positive value.
That is why the return status is tested against 0 value, since that
means that there are no plugin module plugged
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon reception of an iptable_add or iptable_del, a list of interface
indexes may be passed in the zapi interface. The list is converted in
interface name so that it is ready to be passed to be programmed to the
underlying system.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those 3 fields are read and written between zebra and bgpd.
This permits extending the ipset_entry structure.
Combinatories will be possible:
- filtering with one of the src/dst port.
- filtering with one of the range src/ range dst port
usage of src or dst is exclusive in a FS entry.
- filtering a port or a port range based on either src or dst port.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Two new vty show functions available:
show pbr ipset <NAME>
show pbr iptables <NAME>
Those function dump the underlying "kernel" contexts. It relies on the
zebra pbr contexts. This helps then to know which zebra pbr
context has been configured since those contexts are mainly configured
by BGP Flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a mark is set, incoming traffic having that mark set can be
redirected to a specific table identifier. This work is done through
netlink.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In cast the removal of an iptable or an ipset pbr context is done,
then a notification is sent back to the relevant daemon that sent the
message.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon the remote daemon leaving, some contexts may have to be flushed.
This commit does the change. IPset and IPSet Entries and iptables are
flushed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit is a fix that removes the structure from the hash list,
instead of just removing that structure.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add ns_id into zebra_pbr ipset
This is important so that each ipset entry knows on which NETNS the
ipset entry must be inkected
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Fix the code so that we would actually start receiving
RULE netlink notifications.
The Kernel expects the long long to be a bit field
value, while the newer netlink message types are
an enum. So we need to convert the message type
number to a bit position and set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move where we check for non-kernel netlink messages to
a slightly earlier spot. This will allow in subsuquent
commits the removal of an extra parameter that needs to
be passed around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The BPF filter was an exclusion list of netlink messages
we did not want to receive from our self. The problem
with this is that the exclusion list was and will be
ever growing. So switch the test around to an inclusion
list since it is shorter and not growing. Right
now this is RTM_NEWADDR and RTM_DELADDR.
Change some of the debug messages to error messages
so that when something slips through and it is unexpected
during development we will see the problem.
Also try to improve the documentation about what
the filter is doing and leave some breadcrumbs for
future developers to know where to change code
when new functionality is added.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In case, the BGP or PBR daemon leaves, the PBR contexts created by this
daemon are flushed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The linux kernel is getting the same Route Replace semantics
for v6 that v4 uses. Allow the end-user to know if their
kernel has this ability and if so to specify it so zebra
can take advantage of this.
Why not do auto-detection? Because you would have to write
code in zebra to add a route then add the same route again
with different nexthops to see if which semantics it is using.
It sure is easier to just add a cli that allows the user to
do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Setup the buf used for extra data passed into kernel such
that we are cleaning it out before writing data to it,
so we can avoid writing uninited data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The neighbor host_list is expensive as well. Modify
the code to take advantage of a rb_tree as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are going to modify more host_list's to host_rb's
so let's rename some functions to take advantage of
what is there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The host_list when we attempt to use it at scale, ends
up spending a non-trivial amount of time finding and
sorting entries for the host list. Convert to a rb tree.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15658
Reviewed By: CCR-6534
Testing Done: Unit
Issue: frr ptm-enable command not working for interfaces that have been created by frr as a place holder.
Root Cause: The ptm-enable on interface configuration was not getting stored when the interface was internally created by frr.
Fix: Store the ptm-enable configuration even if the interface is internally created.
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Ensure that the next hop of the leaked VRF is not overwritten when the
route is being imported into the target VRF from the VPN table. Also, in
the case of multipath routes, ensure that the nexthop's ifindex is not
inadvertently reset.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Netlink messages from the kernel need to be received in a buffer larger
than 8K in order to handle some types of info - for example, the VLAN
information. Define a separate size for receive and set it to 32K, which
is the value used by other netlink receivers like iproute2.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra starts up it receives from the kernel a full dump of
interface information. Unfortunately it is in no particular order.
As such we sometimes receive data from the kernel about interfaces
we do not know about yet.
In this bug, we are attempting to use the interface pointer(->link)
for a vlan interface that we have not properly resolved.
This fix ensures that we will not attempt to call zvni_map_svi
if we have a NULL pointer. There are other places in the code
we are already checking for the fact that the ->link pointer
is valid before calling this function, so I believe that this
is correct.
We do need to come back and resolve all ->link pointers
after we have received the full table. This can be
done in another commit.
Ticket: CM-17041
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a command to enable symmetric routing only for type-5 routes.
This command is provided under vrf <> option in zebra as follows:
vrf <VRF>
vni <VNI> [prefix-routes-only]
We need the corresponding no version of the command as well as follows:
vrf <VRF>
no vni <VNI> [prefix-routes-only]
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
There are cases when switching from one netns to an other one, where the
if_table registration by index has not been flushed. This fix mitigates
the potential crashes, in case the ifp->node pointer is null, the value
is overwritten by the route_node obtained.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When checking for a duplicate interface in an other NETNS, one may find
an interface in default VRF. That interface may have been moved to that
default VRF, for further action. Prevent from doing any action at this
point.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The log information is better displated.
Also the variable name fits better with other_ifp, than with old_ifp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
re->status and re->flags both influence our decision states
for rib processing. Yet it's impossible to see them. Add
a tiny bit of code to allow us to look at them when things
are not behaving like we would expect.
Additionally dump the nexthop->flags at the same time for
the same reasons.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zns->ns pointer is not created until we get a callback
from the kernel that a ns exists. This should potentially
fix a crash in the *BSD code path.
Fixes: #2152
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since BGPd is not currently setting ID and PROTOCOL in label
requests, temporally disable mismatch error propagation.
This commit will be reverted once fixes for BGPd and label
manager are integrated.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The current implementation did not consider multiple clients to
a label-manager acting as proxy, i.e. relaying messages to another
label manager. Specifically, upon a client's request, it checked
the socket & buffer from the actual label manager for pending
responses and directly copìed them to the client --currently--
being served. As a result, if two clients (e.g. ldpd and bgpd)
sent requests, it could happen that responses being 'on the wire'
from the real label manager towards the proxy, where relayed to
the wrong client. This patch, which requires all msgs to include
a a proto & instance pair, lookups up the zserv client that a
message (response) is to be relayed to.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
We are missing some handling of PBR and SHARP protocols
for netlink operations w/ the linux kernel.
Additionally add a bread crumb for new developers( or existing )
to know to fixup the rt_netlink.c when we start handling new
route types to hand to the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a prior refactor, label manager proxy functionality
was broken in two places:
1) in function relay_response_back(), "dst" stream was
accidentally replaced by "src".
2) in zread_relay_label_manager_request(), src was set to point
to a global struct stream *ibuf that was not used/initialized
anywhere.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
When we are debugging add a bit of extra information
so we can know what we are redistributing to our peers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Rename client_connect and client_close hooks to zapi_client_connect
and zapi_client_close
* Remove some more unnecessary headers
* Fix a copy-paste error in zapi_msg.[ch] header comments
* Fix an inclusion comment in zserv.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c was using hardcoded callbacks to clean up various components
when a client disconnected. Ergo zserv.c had to know about all these
unrelated components that it should not care about. We have hooks now,
let's use the proper thing instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When changing from "ip import-table 10 route-map rdn" to "ip
import-table 10" without a route-map, routes would be deleted
and not reinstalled. This fix resolves that problem.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Zebra is starting to have some run-time capabilites that would be
useful to pass up to the higher level protocols so that they
can act in an appropriate manner when needed.
Send the ecmp value zebra is being run with and whether or not
we believe mpls is enabled in the kernel or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The mpls_label2str and mpls_str2label functions should not
be zebra exclusive functions. Move them to lib/mpls.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somewhere along the way the ability to install multiple
pbr-policys for the same pbr-map was lost.
Add this back. There is a limitation in that we are limited
to 64 interfaces per pbr-policy.
Ticket: CM-20429
Signed-off-by: Donald Sharp sharpd@cumulusnetworks.com>
When I implemented this code change I was only testing against
static routes and with one nexthop. I missed the fact that
we needed to tell rib_process to actually rethink the nexthops.
Ticket: CM-20274
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Need to explicitly exit this context otherwise we risk ambiguities
between global and vrf context commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When a user specifies static routes, there are a couple of states
where we will store the route and display it as part of the 'show run'
but it will not be installed until such time that the dependant state
is created. Add some breadcrumbs to the user so that they can figure
out WTF just happened.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Realized (with coverity's help) the fix had a mistake by pasting in
the wrong route entry to unset the selected flag. This fix takes
care of that mistake.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
With the recent change to just pass the prefix in
for the RTM_DELROUTE, for blackhole routes we
had stopped modifying the req.rtm_type to
be the appropriate type for blackhole routes.
Since we are just deleting on the route, and
zebra is never going to really install the same
route multiple times then we do not need
to specify the req.r.rtm_type for the deletion
command.
Ticket: CM-20616
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When I implemented the same functionality in add_ipv6 that
add_ipv4 has I just assumed that broad would not be NULL with
the ZEBRA_IFA_PEER flag set.
Modify the code to act similiar to the flow of control
in add_ipv4.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem was due to in certain route replace circumstances,
we would mark the old route_entry as removed to delete it but
would leave the selected flag set. When the rn was pulled off the
work queue for process, we would find both the new re and old re
(being deleted) with the selected flag set and would assert.
In this change, when we decide to delete the old re, we also mark
it as no longer selected.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This renaming of structure permits better identify which structure is
looked up, since policy routing will not only rely on iprule, but also
on some other structures.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In order to avoid duplicates functions, the zebra_pbr_rule structure
used by zebra to decode the zapi message, and send netlink messages, is
slightly modified. the structure is derived from pbr_rule, but it also
includes sock identifier that is used to send back information to the
daemon that did the request. Also, the ifp pointer is stored in that
structure.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
