Sleeping when convergence is not guaranteed in 60 seconds
and then testing the rib to see if it has the data is
not a great way to have a test complete all the time.
Modify the code so that we check for convergence
and if we have converged then look in the rib.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. There were few tests where routes were configured with blackhole and
non-blackhole nexthops simultaneously, enhanced tests accordingly and
verified in master branch and with PR #8158 changes.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Add some pytest.mark.bgpd. This is about all I could stomach doing
in one patch. I'll do another pass at another time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the last SID in the TI-LFA repair list is an Adj-SID from the
penultimate hop router towards the final hop, the No-PHP flag of the
original Prefix-SID must be honored in the repair list itself since
the penultimate hop router won't have a chance to process that SID
and pop it if necessary.
Reported-by: Fredi Raspall <fredi@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There are two fixes to handle slow convergence on ARM -
1. Ping on every re-try attempt to account for initial packet loss
2. Handle incomplete show outputs gracefully
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The changes add the "jsoncmp_pass" and the "jsoncmp_fail" commands to
compare VTY shell's JSON output to an expected JSON object during
topotests using the LabN testing framework. This helps to eliminate
false negative test results (i.e. due to routes beeing out of order
after convergence or cosmetic changes in VTY shell's text output).
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
When parsing the output of "ip -6 address", allow arbitrary base interface
names (the part after "@" in the interface name), not just "if0-9". Without
this, link-local addresses sometimes are attributed to the wrong interface
because we're not matching the interface name but still handle the
interface's addresses.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Make the generate-support-bundle script and interactions more
python3-friendly, and use python3 explicitly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Modify the timers on the bgp_blackhole_community test to
be more aggressive so our test system will recover faster
when we drop packets.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add pytest marking for ospfd. This commit also has some other test markings
because I do not want to have to go through the same test multiple times.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have a ospfd.conf file in the r2 directory but the
ldp-sync-isis-topo1 test does not use ospf. Let's remove it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Only one of the four reference files was present; add the missing
three. The test just silently passed if a ref file was missing:
change that to a failure.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a test for the infinite recursion case fixed
with 0c4dbb5f8fe8fb188fa0e0aa8ce04764e893b79b
See that commit for details of the problem. This test uses a simpler
version of the repro found there as the test.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This test relied on the default addition of SVI MAC in zebra
now this has been fixed the test needs to be updated to work
with the new behaviour.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
In test_converge_protocols() use sed to match the "show ip(v6) route"
header and strip it, rather than using tail which requires hardcoding
the expected length of the header (which is subject to change).
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Since SNMP is a pain to install add a check which will be used
in all SNMP tests in future to silently skip SNMP tests if SNMP
has not been installed on the base system.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Adding test to verify default route is added when attached-bit
receive and send are enabled and not added when feature is disabled.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
This script involves Restart ospfd,
restart frr with ospf enabled,
staticd with redistribution inside ospf is enabled
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
When P and Q spaces are adjacent then it makes sense to use adjacency SIDs to
from the P node to the Q node. There are some other corner cases where this
makes also sense like when a P/Q node adjacent to root node.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
1. Added 7 testcases to verify PIM BSM functionality. Here we have used Scapy
to send raw packet, generated using Cisco and FRR. Raw packets are kept in
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 8 testcases to verify PIM BSM functionality. Here we have used Scapy
to send raw packet, generated using Cisco and FRR. Raw packets are kept in
JSON file and sent tests on-demand in script.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Tests were timing out in our test system due to lost packets and
flakiness of the lower end systems. Just set the timers to 3/10
and give them plenty of time to converge.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
New test does this:
a) Ensures that we run the correct number of times given two
`ip protocol X` commands( ie we do not run the route-map application
against all routes, only those affected )
b) Ensure that when we modify the route-map the state ends up sane
this includes making a static route depend on a sharp route that
gets removed from the change of the sharp route-map
c) Ensure that the kernel routes are correct.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability for our topotests to take advantage of pytest `mark`ing.
This effectively allows you to tell pytest to run against certain sets
of tests. For a demonstration purpose I've added in marks for:
babel
eigrp
ldp
ospf
pim
rip
And setup tests to run against those tests that only test those protocols.
You can run against eigrp tests by running `pytest -k eigrp`
Other combinations are also available based upon simple boolean logic.
Just read the pytest.mark documentation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Simple test which creates a router running snmp and bgpd and
checks we can read the correct bgpVersion using snmp.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
1. Adding api to verify ip nht command.
2. 5 cases of static routes with admin dist and tag
3. Run time = 89Secs
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
Prepare the infrastructure to allow configuring and launching an SNMP
daemon as part of testing scenario.
Signed-off-by: Babis Chalios <babis@voltanet.io>
Signed-off-by: Pat Ruddy Chalios <pat@voltanet.io>
* If pathd binary is not found, skip the SR-TE topotests.
* Fix some compilation warnings when pathd is not built.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
* Added a new topotest to test bgpd listening on multiple addresses.
* Updated the existing bgpd tests according to the parameter added to
bgp_master_init.
Signed-off-by: "Adriano Marto Reis" <adrianomarto@gmail.com>
In test_bgp_mutli_vrf_topo2.py it's clear that we remove then
re-add the vrf interfaces. Then the test was immediately
checking to ensure that the routes were available.
BGP needs time to reconverge. Let's ensure that first.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add new RLFA topotest that tests all RLFA configuration knobs and
how isisd and ldpd react to various configuration changes that can
occur in the network.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Extend the existing SPF unit testing infrastructure so that it can
test RLFA as well.
These new unit tests are useful to test the RLFA PQ node
computation on several different network topologies in a timely
manner. Artificial LDP labels (starting from 50000) are used to
activate the computed RLFAs.
It's worth mentioning that the computed backup routing tables
contain both local LFAs and remote LFAs, as running RLFA separately
isn't possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The bgp_gr_functionality_topo1 test was shutting down an
interface on r2 and then trying to bring it up on r1.
Hijinx ensued.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
`lcommunity_gettoken` expects a space-delimeted list of 0 or more large
communities. `lcommunity_list_valid` can perform this check.
`lcommunity_list_valid` now validates large community lists more
accurately based on the following condition: Each quantity in a standard bgp
large community must:
1. Contain at least one digit
2. Fit within 4 octets
3. Contain only digits unless the lcommunity is "expanded"
4. Contain a valid regex if the lcommunity is "expanded"
Moreover we validate that each large community list contains exactly 3
such values separated by a single colon each.
One quirk of our validation which is worth documenting is:
```
bgp large-community-list standard test2 permit 1:c:3
bgp large-community-list expanded test1 permit 1:c:3
```
The first line will throw an error complaining about a "malformed community-list
value". The second line will be accepted because the each value is each treated as
a regex when matching large communities, it simply will never match anything so
it's rather useless.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
1. Enhanced lib/topojson.py for creating topologies with switches and routers
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
1. Enhanced lib/common_config.py for common configuration/verification needed
for PIM automation
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
1. Added lib/pim.py for PIM configuration/verification
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
An external label manager plugin may want to use the following
functions:
- create_label_chunk
- assign_label_chunk
- delete_label_chunk
- release_label_chunk
This test ensures that they are externally visible.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
This test checks the interactions between the BGP label requesting
code and the labelpool code to ensure the correct number of labels
and label chunks are requested and those labels are freed back into
the pool when the corresponding prefix is removed.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Timestamps in test logs are needed for correlation with messages in
routing protocol log files. Vox populi indicates preference for
timestamp at beginning of line.
OLD:
(#55) scripts/rip-show.py:61 COMMAND:r1:vtysh -c "show ip rip status": 00:0.* 00:0:wait:RIP Peers:
NEW:
Sat Dec 19 08:26:45 2020 (#55) scripts/rip-show.py:61 COMMAND:r1:vtysh -c "show ip rip status": 00:0.* 00:0:wait:RIP Peers:
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
While accidently running the topotests with version 3
I keep getting:
TypeError: `dict_values` object does not support indexing..
version 2 of python dict.values() returns a list.
version 3 does not
Write some code to allow both to be handled.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. Enhanced framework to
a. Verify fib active routes(lib/common_config.py).
b. Verify bgp multi path routes(lib/bgp.py).
c. Create mininet nodes with different names(lib/topojson.py).
4. 12 Test cases of static routing with ibgp.
Test suite execution time is ~30 minutes.
5. 12 Test cases of static routing with ebgp.
Test suite execution time is ~30 minutes.
Signed-off-by: naveen <nguggarigoud@vmware.com>
The `show ip nht` and `show ipv6 nht` commands were broken.
This is because recent code commit: 0154d8ce45
assumed that p must not be NULL and this is not the case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. As per recent changes done in PR #7652, we have modified the auto-rd verification logic
2. Dev PR link: https://github.com/FRRouting/frr/pull/7652
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
I accidently installed something that is telling me about
unlosed handles in the tests. Let's clean them up.
<and yes I have no idea wtf I did>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test_bgp_multi_vrf_topo2.py script had a bunch
of places where it would change an interface status
or add delete routes that would affect bgp convergence
but it was never ensuring that convergence had happened
before the test verified the bgp rib. I believe this
was leading to many intermittant ci failures in
testing for other PR's to be accepted. Modify
the code to wait for bgp convergence if we just
made a change to the topology
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For each afi/safi of 'show bgp summary', display the peer description
each time needed. This information is useful, for instance in the case
of a device connected with multiple peers.
The topotest all_protocol_startup is changed accordingly.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is the opposite of TOPOTEST_AUTOLOAD: Instead of automatically loading
missing modules, TOPOTEST_NOLOAD prevents module loading and supresses
questions about it.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
the topolog importation folder must be precised. otherwise following
error message appears:
root@dut-vm:~/topotests/bgp_flowspec# python3 test_bgp_flowspec_topo.py
Traceback (most recent call last):
File "test_bgp_flowspec_topo.py", line 96, in <module>
from lib.lutil import lUtil
File "/root/topotests/bgp_flowspec/../lib/lutil.py", line 25, in <module>
from topolog import logger
ImportError: No module named 'topolog'
root@dut-vm:~/topotests/bgp_flowspec#
The same error occurs with lutil and bgprib which are 2 libraries
located under lib/ folder. Some precisions are added too.
PR=71290
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
python3 does not support execfile implementation.
replace it with open and exec api that are available in both python 2
and 3 implementations.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
