Updated /doc/topotests.rst with socat details,
which is needed to run PIMv6 tests. Socat tool
is used to send PIMv6 join and traffic.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
convert:
frr_with_mutex(..)
to:
frr_with_mutex (..)
To make all our code agree with what clang-format is going to produce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
On line 16 of this file following sentence has a typo.
> * once done, the updated copy is swapped in in a single
Remove unused "in" from document.
Signed-off-by: alireza <alirezaarzehgar82@gmail.com>
A new command is available under SAFI_MPLS_VPN:
With this command, the BGP vpnvx prefixes received are
not kept, if there are no VRF interested in importing
those vpn entries.
A soft refresh is performed if there is a change of
configuration: retain cmd, vrf import settings, or
route-map change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The command `debug bgp allow-martian` is not actually
a debug command it's a command that when entered allows
bgp to not reset a peering when a martian nexthop is
passed in the nlri.
Add the `bgp allow-martian-nexthop` command and allow it to be
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Update the documentation with realms and how they
interact with nexthop groups that are installed into
the kernel.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
"show ip ospf neighbour [nbrid] [json]" is expected to give brief output
of the specific neighbour. But it gives the detailed output without
the detail keyword.
"show ip ospf neighbour [nbrid] [deatil] [json]" command is failed to
fetch the ecpected o/p. Corrected it.
Ex o/p:
frr(config-if)# do show ip ospf neighbor
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
8.8.8.8 1 Full/DR 17m03s 31.192s 20.1.1.194 ens192:20.1.1.220 0 0 0
30.1.1.100 1 Full/DR 56.229s 32.000s 30.1.1.100 ens224:30.1.1.220 0 0 0
frr(config-if)#
frr(config-if)#
frr(config-if)# do show ip ospf neighbor 8.8.8.8
Neighbor 8.8.8.8, interface address 20.1.1.194
In the area 0.0.0.0 via interface ens192
Neighbor priority is 1, State is Full/DR, 6 state changes
Most recent state change statistics:
Progressive change 17m18s ago
DR is 20.1.1.194, BDR is 20.1.1.220
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 35.833s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
Graceful restart Helper info:
Graceful Restart HELPER Status : None
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail
No such interface.
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail json
{}
frr(config-if)#
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Allow end operator to set how long a nexthop-group is kept around
in the system after it is no-longer being used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
With current release, forcin the source ip address when setting up a BMP
connection is not possible.
The need is to add an extra parameter for the following vty command:
router bgp 65500
bmp targets AAA
bmp connect 2.2.2.2 port 666 min-retry 100 max-retry 700
bmp connect 2:2::2:2 port 666 min-retry 100 max-retry 700 [source-interface lo1]
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Allow the end operator to match `match peer <PEERGROUPNAME>`
in a route-map. If the end operator defines interface
based peers and peer-groups that have names that overlap
the interface based peer will match first.
Fixes: #11316
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Seems replacement is not working when referenced, only when used directly
in the text |PACKAGE_URL|.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Allow BGP to control the TOS DSCP value in the tcp header
via a new command at the bgp global level `bgp session-dscp <0-63>`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Pavel Shirhov <pavelsh@microsoft.com>
The `bgp no-rib` command cycles through all the bgp rib tables
and removes them from zebra. Modify the code so that FRR notices
that it is attempting to cycle through the safi's that are two level
tables. In addition these safi's cannot just blindly remove the routes
from the rib as that there are none explicitly.
This code just prevents the crash in bgpd. It does not properly cycle
through and remove the zebra changes made that are explicit to these afi's.
This should be handled as appropriate by the developers on these safi's when
it becomes important to them.
Fixes: #11178
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
N-bit flag should be exchanged in BGP OPEN messages, not only when the
bgpd is restarted/started.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
By changing this API call to use a `struct ipaddr`, which encodes the
type of IP address with it. (And rename/remove the `IPV4` from the
command name.)
Also add a comment explaining that this function call is going to be
obsolete in the long run since pimd needs to move to proper MRIB NHT.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This has already been a requirement for Solaris, it is still a
requirement for some of the autoconf feature checks to work correctly,
and it will be a requirement for `-fms-extensions`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- Create frr docker container based in new Red Hat Universal Base
Images.
- This build a docker container based in ubi-8.
- Need to get the devel packages from centos-8 stream repos.
- Centos-8 stream repos added : base, appstream, powertools and epel
Signed-off-by: Javier Garcia <javier.martin.garcia@ibm.com>
Config for -
1. Preventing fragmentation via user configured EAD RTs
2. Limiting the number of EVIs per-fragment if EAD fragmentation is needed
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
For some reason I couldn't think of the word "container" back when I
wrote most of this. It is the proper term most developers wil
understand correctly, so let's use it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RB-tree and double-linked-list easily support backwards iteration, and
an use case seems to have popped up. Let's make it accessible.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
*BSD has some special struggles associated with the graceful
restart code in zebra. Add a bit of documentation to outline
this problem and how it is solved.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem Statement:
=================
This commit is to add document support for OSPF6 authentication
trailer feature, which is adding support for RFC7166.
RCA:
====
NA
Fix:
====
To add detailed description for feature support.
This document caputres
Configuration CLI
Show commands
Debug commands
Clear command
That are added as part of the feature with examples.
Risk:
=====
Low
Tests Executed:
===============
NA
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
`show ip pim assert` shows S,G ifchannel information even when
there is no information available about the assert process.
Fix the code to not dump non-interesting cases.
Fixes: 10462
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While going through the doc, found some commands are missing in the doc.
Also correcting few mistakes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
New Constaint Shortest Path First algorithm has been introduce in FRR library.
Add a new 'show sharp cspf' command as example of how to use these
CSPF algorithm.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
As helper function of Segment Routing Flex Algo or RSVP-TE
add Constrained Shortest Path First algorithm able to compute
path with constraints. Supported constraints are as follow:
- Standard IGP metric
- TE IGP metric
- Delay metric
- Bandwidth for given Class of Service for bandwidth reservation (RSVP-TE)
Usage of CSPF algorithms is detailed in the doc/developer/cspf.rst file
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Here "new" is very puzzling. If new parameters with default values on peer
configuration node are set, they will not be used yet.
So just clarify it:
Only "non-default" values on peer configuration node are set, they can override
the conrresponding values from profile.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Instead of referring to the draft of IP Prefix Advertisement in
Ethernet VPN let's point to the recently published RFC9136.
Signed-off-by: Marlin Cremers <marlin@cbws.nl>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added the High Level design for implementing MLD and PIMv6.
Added a PPT as well in case someone wants to translate it
to some other language.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
On lower CPU with lots of static routes, it will cost more than 2
minutes.
2 minutes is the default timeout value, we can adjust it by configure:
./configure --with-service-timeout=<digit>
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Using with LLGR, this should be allowed setting GR restart-time timer to 0,
to immediately start LLGR timers.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
rfc7196 recommends:
In addition, BGP implementations have an internal constant, which we
will call the 'maximum penalty', and the current computed penalty may
not exceed it.
Router Maximum Penalty: The internal constant for the maximum
penalty value MUST be raised to at least 50,000.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The following subcodes are defined for the Cease NOTIFICATION
message:
Subcode Symbolic Name
1 Maximum Number of Prefixes Reached
2 Administrative Shutdown
3 Peer De-configured
4 Administrative Reset
5 Connection Rejected
6 Other Configuration Change
7 Connection Collision Resolution
8 Out of Resources
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Updating babel default configuration parameters rtt-min and
max-rtt-penalty according to the actual implementation.
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem:
=======
Generate query once cli is generating IGMPv2 report for IGMPv3 enabled interface
Description:
===========
If the version is not specified in the cli, it was taking version 2 as default
Fix:
===
If the version is not specified in the cli along with ip igmp generate-query-once,
the default will be the version enabled on that interface.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
This utility script helps in generated formatted and consistent
change log including:
1- group logs per daemon
2- standarize daemon names (lowercase, end with d)
3- capitalize all log lines
4- no merge commits
caveat: comments are assumed to be in the form
daemon-name : message
Sample Output:
```
sharpd
Follow the practice on cli design for json output
Install route supports nexthop-seg6 (step3)
Install_routes_helper support zapi_route flags (step1)
snapcraft
Add missing dependency
Add pathd to frr snap daemons
Change base to ubuntu 18.04 and libyang 2.0.7
staticd
Convert typedef to enum
Fix distance processing
Fix late initialization of blackhole type
Output config using nb callbacks instead of operational data
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Add Link State TED features to isis_te.c and new CLI to export LS TED and
show LS TED to IS-IS.
IS-IS LSPs are parse each time a new LSP event occurs in order to update
accordingly the Link State Traffic Engineering Database. LS TED could be
exported through the ZAPI Opaque message (see sharpd as example).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There was a historical blurb at the top of the process architecture
document that in several instances caused some confusion regarding
whether or not FRR supports multithreading. Remove this paragraph and
replace it with a summary of the page contents.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
It's strictly optional, but… the backtraces are really much better.
Specifically, `libunwind` is notably more capable in figuring out
function names compared to glibc/libexecinfo `backtrace_symbols()`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* Separate process into stages; stage 1 is preparation, stage 2 is
staging, stage 3 is publishing
* Reorder some steps
* Remove some steps
* Elaborate on some steps
* Add some steps
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Clarify process for editing changelog and updating the configure.ac
project version, as well as procedure for doing sanity testing prior to
creating the release tag.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
