This commit introduces BGP peer-group overrides for the last set of
peer-level attrs which did not offer that feature yet. The following
attributes have been implemented: description, local-as, password and
update-source.
Each attribute, with the exception of description because it does not
offer any inheritance between peer-groups and peers, is now also setting
a peer-flag instead of just modifying the internal data structures. This
made it possible to also re-use the same implementation for attribute
overrides as already done for peer flags, AF flags and AF attrs.
The `no neighbor <neigh> description` command has been slightly changed
to support negation for no parameters, one parameter or * parameters
(LINE...). This was needed for the test suite to pass and is a small
change without any bigger impact on the CLI.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit implements BGP peer-group overrides for the timer flags,
which control the value of the hold, keepalive, advertisement-interval
and connect connect timers. It was kept separated on purpose as the
whole timer implementation is quite complex and merging this commit
together with with the other flag implementations did not seem right.
Basically three new peer flags were introduced, namely
*PEER_FLAG_ROUTEADV*, *PEER_FLAG_TIMER* and *PEER_FLAG_TIMER_CONNECT*.
The overrides work exactly the same way as they did before, but
introducing these flags made a few conditionals simpler as they no
longer had to compare internal data structures against eachother.
Last but not least, the test suite has been adjusted accordingly to test
the newly implemented flag overrides.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit cleans up some ugly leftovers from previous flag-override
implementation and refactors the AF-flag override implementation to
match the same behavior the newly added peer-flag override
implementation has.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The labeled unicast and unicast tables have been combined
into the unicast table. Additionally we have a restriction
where if you configure labeled unicast you cannot configure
unicast. This created a bug with 'show bgp ipv4 labeled-unicast summ'
command where we were displaying NoNeg, because v4 has been intentionally
turned off.
Modify the code so that when we are looking up if we have negotiated
a capapbility we use the correct one, while still using the appropriate
table for prefix count.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It partially implements
a refusal to create multiple instances. If you do not need
multiple instances, just don't create them in the cli instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It sets a small variety
of options via the BGP_OPT_CONFIG_CISCO flag. Set for removal
in 1 year.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes all outstanding style/formatting issues as detected by
'git clang-format' or 'checkpath' for the new peer-group override
implementation, which spanned across several commits.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit fixes peer-group overrides for inverted AF flags. This
implementation is currently only being used by the three 'send-community'
flags. Commit 70ee29b4d introduced generic support for overriding AF
flags, but did not support inverted flags.
By introducing an additional array on the BGP peer structure called
'af_flags_invert' all current and future flags which should work in an
inverted way can now also be properly overridden.
The CLI commands will work exactly the same way as before, just that 'no
<command>' now sets the flag and override whereas '<command>' will unset
the flag and remove the override.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Problem reported due to tab completion showing all possible peers
in every vrf, but when neighbor in wrong vrf entered "no such
neighbor" is the error message. Making it slightly more clear
with "no such neighbor in the view/vrf" to clue the user that they
may have specified the wrong vrf.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This commit moves the command 'bgp enforce-first-as' from global BGP
instance configuration to peer/neighbor configuration, which can now be
changed by executing '[no] neighbor <neighbor> enforce-first-as'.
End users can now enforce sane first-AS checking on regular sessions
while e.g. disabling the checks on routeserver sessions, which usually
strip away their own AS number from the path.
To ensure backwards-compatibility, a migration routine was added which
automatically sets the 'enforce-first-as' flag on all configured
neighbors if the old global setting was activated. The old global
command immediately disappears after running the migration routine once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation does not respect the AFI+SAFI combination of
a peer when executing a non-soft (hard) clear. An example would be the
command `clear bgp ipv4 unicast *`, which will clear all BGP peers, even
those that do not have IPv4-Unicast activated.
This commit fixes that behavior by applying the same rules to both soft
and hard clear commands, so that peers without a matching AFI+SAFI
combination will be no longer modified.
Additionally, this commit adds warning messages to all `clear bgp
[<afi>] [<safi>] <target>` commands when no matching peers with the given
AFI+SAFI combination could be found.
Both existing and new warning messages have been extended to also
mention the AFI+SAFI combination that is missing, which is more helpful
to the user than a generic expression 'No peer configured'.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of building JSON output is greatly different
for large communities compared to standard communities. This is mainly
noticeable by the missing 'list' attribute, which usually offers an
array of all communities present on a BGP route.
This commit adds the missing functionality of properly returning a
'list' attribute in JSON output and also tries a similar approach like
the standard communities are using to implement this feature.
Additionally, the 'format' specifier has been completely removed from
large communities string/JSON rendering, as the official RFC8092 specifies that
there is only one canonical representation:
> The canonical representation of BGP Large Communities is three
> separate unsigned integers in decimal notation in the following
> order: Global Administrator, Local Data 1, Local Data 2. Numbers
> MUST NOT contain leading zeros; a zero value MUST be represented with
> a single zero. Each number is separated from the next by a single
> colon. For example: 64496:4294967295:2, 64496:0:0.
As the 'format' specifier has not been used/checked and only one
canonical representation exists per today, there was no reason to keep
the 'format' parameter in the function signature.
Last but not least, the struct attribute 'community_entry.config' is no
longer being used for large communities and instead 'lcommunity_str' is
being called to maintain a similar approach to standard communities.
As a side effect, this also fixed a memory leak inside 'community_entry_free'
which did not free the allocated memory for the 'config' attribute when
dealing with a large community.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Before this fix, both real neighbors and peer-groups were lumped
together in auto-completion and it didn't work at all for
peer-groups. This fix changes that behavior to do the right
thing.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
In the FRR implementation of EVPN,
eBGP leaf-spine peering for EVPN is fully supported by allowing
the next hop to be propagated and not rewritten at each hop.
There are other changes also related to route import to facilitate this.
However, propagating the next hop is not correct in some cases.
Specifically, if the DC is comprised of multiple PODs
with distinct intra-POD and inter-POD VxLAN tunnels,
EVPN routes received from an adjacent POD by a border/exit leaf
must be propagated into the local POD with the next hop rewritten (to self).
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The loop over all afi's implies that these commands actually need
to loop over all afi's to check the vpn policy. We know the
appropriate afi based upon the node we are in. So just return
the correct afi to look at and then just apply it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, you could configure importing a vrf from inside
the same vrf. This can lead to unexpected behavior in the leaking
process. This fix disallows that behavior.
Ticket: CM-20539
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Tripped over a crash running the cli_crawler that occurred when the
sequence was doing "import vrf NAME" and "no import vrf NAME" inside
a vrf but a default bgp instance had not been created. This fix
auto-creates the default instance if the "import vrf NAME" is
entered and a default instance does not exist.
Ticket: CM-20532
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, the import vrf route-map command only worked
if the route-map existed prior to the command. Additionally, if
the import vrf route-map command was issued without an existing
route-map, the imported prefixes were not removed. This fix
resolves both of thes mis-behaviors. bgp-smoke run with same
failures as base.
Ticket: CM-20459
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7358
Found that when doing "import vrf default" in another vrf, an
extra line was added to the configuration in error. This fix
resolves that incorrect configuration. Manual testing will be
attached to the defect.
Ticket: CM-20467
Signed-off-by: Don Slice <dslice@cumulustnetworks.com>
Reviewed by: Donald Sharp <sharpd@cumulusnetworks.com>
Added the cli for doing route-map filtering on imported routes via
the new "import vrf route-map <NAME> command.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement fixes for route leaking between VRFs through BGP, especially for
the scenario where routes are leaked from a VRF X to multiple other VRFs.
This include making sure that import and export happen via the global VPN
table, setting RD correctly and proper handling for multiple import/export.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the `import vrf XXX` command is entered under
an afi/safi for bgp and the XXX vrf bgp instance
does not yet exist, auto-create it using the same
ASN that the we are importing into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
add the `import vrf XXXX` command
router bgp 4 vrf DONNA
<config>
!
router bgp 4 vrf EVA
<config>
address-family ipv4 uni
import vrf DONNA
!
!
This command will allow for vrf EVA to specify that it would like
to receive the routes from vrf DONNA into it's table.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Remove unused parameter
* Restore behavior described by function comment
* Eliminate NPD caught by static analysis
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is relying on bgp vpn-policy. It is needed to configure
several bgp vrf instances, and in each of the bgp instance, configure
the following command under address-family ipv4 unicast node:
[no] rt redirect import RTLIST
Then, a function is provided, that will parse the BGP instances.
The incoming ecommunity will be compared with the configured rt redirect
import ecommunity list, and return the VRF first instance of the matching
route target.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- vpn_leak_to_vpn_active(): check instance type
- vpn_leak_prechange(): qualify with test for active
- vpn_leak_postchange(): remove duplicated call to
vpn_leak_from_vrf_update_all()
- bgp_vty.c: Avoid null-pointer dereference for command "no rt vpn import"
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This commit fixes the handling of incoming parameters passed in
following vty functions:
clear ip bgp ipv6 [safi] prefix []
clear ip bgp [vrf ] ipv6 [safi] prefix []
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This worked for unnumbered peers but not for numbered peers. This is
before the fix:
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor swp1 interface peer-group FOO
neighbor 1.1.1.1 peer-group FOO
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10# wr
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Integrated configuration saved to /etc/frr/frr.conf
[OK]
cel-redxp-10# conf t
cel-redxp-10(config)# router bgp
cel-redxp-10(config-router)# no neighbor swp1 interface peer-group FOO
cel-redxp-10(config-router)# no neighbor 1.1.1.1 peer-group FOO
cel-redxp-10(config-router)# do show run
Building configuration...
Current configuration:
!
frr version 4.1-dev
frr defaults datacenter
hostname cel-redxp-10
!
service integrated-vtysh-config
!
password cn321
!
log syslog
!
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor 1.1.1.1 remote-as external
!
address-family ipv4 unicast
no neighbor 1.1.1.1 activate
exit-address-family
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10(config-router)#
After the fix "no neighbor 1.1.1.1 peer-group FOO" removes the 1.1.1.1
neighbor.
We need a better error message. "Multiple BGP processes are configured"
doesnt makes sense anymore as with l3vni,
we could have multiple auto configured bgp instances.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
We've run across an issue where the local connected
ip address is not being removed in some error condition.
During trackdown it was noticed that we cannot look
at this table for views/vrf's. While we don't have the
bug tracked down yet this will help us figure it out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported with output of the command "show bgp vrf all
neighbor x.x.x.x" not limiting the output to that peer in any vrf.
This fix corrects the logic to display by neighbor
(ipv4/ipv6/interface) in any vrf.
Ticket: CM-17377
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The bestpath multipath-relax setting was added to the output of
"show ip bgp neighbor json" several months ago but this is not
the correct place to display that information and this fix removes
it from there. The multipath-relax setting was also added
to the output of "show ip bgp sum json" which is fine.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Adds ability to specify that peers should be administratively shutdown
when first configured.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Remove the ability to attempt to configure a couple of options on
directly connected neighbors that don't make sense for them, as well as
the soft error handling code.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If we have configured neighbor 1.1.1.1 for an afi/safi but they have not
activated that afi/safi with us then display "NoNeg" in the state column
of the summary output. This is to make troubleshooting afi/safi
easier.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
The bgpTimerUp value was incorrectly named, add
a correct name bgpTimerUpMsec and add some
code to allow for deprecation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For some reason bgp is calculating the peer uptime
in miliseconds incorrectly. Additionally we have
the peer_uptime function call that should be doing this!
But since we've choosen different names for the json output
we cannot fix it at this point.
uptime contains the number of seconds of uptime here. Just
multiply by 1k and display that( as peer_uptime does )
Fixes: #1585
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Was using 0 as a sentinel value, so user couldn't configure 0 as the
value of the coalesce timer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
BGP VRF can be created/deleted either via config or via l3vni add/del.
We need to handle various sequences.
1. If user config is presented, an l3vni del should not delete the vrf instance
2. do not write bgp config in show running for auto created vrf
2. If l3vni present, disallow the cli for deleting bgp vrf instance
3. If l3vni is added and vrf config is present set the flags properly
4. if bgp vrf is configured unset the AUTO flag
Ticket: CM-18630
Review: CCR-6906
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Since coalesce time is now heuristically adjusted based on peer count,
we need to separate out specific configuration by the user from the
current value. Behavior established is to not adjust if the user has a
value set.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bgpd supports setting a write-quanta that serves as a hint on how many
packets to write per I/O cycle. Now that input is buffered, it makes
sense to add the equivalent parameter for how many packets are processed
per cycle. This is *not* how many packets are read off the wire per I/O
cycle; rather it is how many packets are processed from the input buffer
in a given cycle after having been read off the wire and sanitized.
Since these values must be used from multiple threads, they have also
been made atomic.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Remove t_write
* Remove t_keepalive
These have been replaced by pthreads and are no longer needed. Since
some code looks at these values to determine if the threads are
scheduled, also add a new bitfield to store the same information.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fixes a bug whereby all peer-groups would be shown even when a
particular peer-group was specified for display.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Problem reported that we weren't adjusting the keepalive timer
correctly when we negotiated a lower hold time learned from a
peer. While working on this, found we didn't do inheritance
correctly at all. This fix solves the first problem and also
ensures that the timers are configured correctly based on this
priority order - peer defined > peer-group defined > global config.
This fix also displays the timers as "configured" regardless of
which of the three locations above is used.
Ticket: CM-18408
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6807
Testing-performed: Manual testing successful, fix tested by
submitter, bgp-smoke completed successfully
When retrieving information about neighbors or summary in json
add some information about what bestPath particulars we have for
this bgp session.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of this was so egregiously stupid, I couldn't look at it without
gouging my eyes out...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The bgp clear help string was misordered.
New output:
robot.cumulusnetworks.com# clear bgp
(1-4294967295) Clear peers with the AS number
* Clear all peers
A.B.C.D BGP neighbor address to clear
WORD BGP neighbor on interface to clear
X:X::X:X BGP IPv6 neighbor to clear
external Clear all external peers
ipv4 Address Family
ipv6 Address Family
peer-group Clear all members of peer-group
prefix Clear bestpath and re-advertise
view BGP view
vrf BGP VRF
Fixes: #1005
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the MAC changes for a local neighbor, ensure that the neighbor data
structure as well as the link between the neighbor and MAC data structures
is updated correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17565
Reviewed By: CCR-6605
Testing Done: Manual, evpn-smoke
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
SAFI values have been a major source of confusion over the last few
years. That's because each SAFI needs to be represented in two different
ways:
* IANA's value used to send/receive packets over the network;
* Internal value used for array indexing.
In the second case, defining reserved values makes no sense because we
don't want to index SAFIs that simply don't exist. The sole purpose of
the internal SAFI values is to remove the gaps we have among the IANA
values, which would represent wasted memory in C arrays. With that said,
remove these reserved SAFIs to avoid further confusion in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
