When using "match evpn default-route" rule, match_arg is NULL and strcmp
is not happy with that. There's already a special function named rulecmp
that handles such situations.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, when we check the new prefix-list entry for duplication, we
only take filled in fields into account and ignore optional fields.
For example, if we already have `ip prefix-list A 0.0.0.0/0 le 32` and
we try to add `ip prefix-list A 0.0.0.0/0`, it is treated as duplicate.
We should always compare all prefix-list fields when doing the check.
Fixes#9355.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Previous:
- frrscript_load: push Lua function onto stack
- frrscript_call: calls Lua function
Now:
- frrscript_load: checks Lua function
- frrscript_call: pushes and calls Lua function (first clear the stack)
So now we just need one frrscript_load for consecutive frrscript_call.
frrscript_call does not recompile or reload the script file, it just
keys it from the global Lua table (where it should already be).
Signed-off-by: Donald Lee <dlqs@gmx.com>
When we get a bad value for the opaque data length, instead
of stopping the program, discard the data and move on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When running `make check` against a build that zeromq enabled
the test_zmq unit test was crashing. The commit:
e08165def1
Introduced this crash. Removing the part of the commit
that was causing the crash in the test. This is mainly
to get `make check` working again for those people using
zeromq in their builds.
Fixes: #9176
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When exiting from link-params node, we must not decrement xpath_index
because it is not incremented when entering the node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Will be handy to filter BGP prefixes by using BGP community alias
instead of numerical community values.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
There is some rather heavy error checking logic in frrscript_call. Normally
I'd put this in the _frrscript_call function, but the error checking needs
to happen before the encoders/decoders in the macro are called.
The error checking looks messy but its really just nested ternary
expressions insite a larger statement expression.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Instead of 1 frrscript : 1 lua state, it is changed to 1 : N.
The states are hashed with their function names.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Move `is_default_prefix` variations to `lib/prefix.h` and make the code
use the library version instead of implementing it again.
NOTE
----
The function was split into per family versions to cover all types.
Using `union prefixconstptr` is not possible due to static analyzer
warnings which cause CI to fail.
The specific cases that would cause this failure were:
- Caller used `struct prefix_ipv4` and called the generic function.
- `is_default_prefix` with signature using `const struct prefix *` or
`union prefixconstptr`.
The compiler would complain about reading bytes outside of the memory
bounds even though it did not take into account the `prefix->family`
part.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We are sending up to ZAPI_MESSAGE_OPAQUE_LENGTH but checking
for one less. We know the data will fit in it to that size.
Also we have asserts on the write to ensure we don't go over
it
Fixes: #8995
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There's nothing that can be done here with an error. Try to make
Coverity understand that this is intentional.
(I don't know if the `(void)` will actually fix the coverity warning,
but I don't really have a better way to figure it out beyond just
getting this merged and waiting for a result...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While we do have `show ip prefix-list NAME A.B.C.D/M`, that doesn't
actually run the prefix list matching code. While the result would
hopefully be the same anyway, let's have a way to call the actual prefix
list match code and get a result.
(As an aside, this might be useful for scripting to do a quick "is this
prefix in that prefix list" check.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... the PIM code is kinda misusing prefix lists to match addresses.
Considering the weird semantics of access-lists, I can't fault it.
However, prefix lists aren't great at matching addresses by default,
since they try to match the prefix length too. So, here's an "address
match mode" for prefix lists to get that to work more reasonably.
Fixes: #8492
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RFC 3623 specifies the Graceful Restart enhancement to the OSPF
routing protocol. This PR implements support for the restarting mode,
whereas the helper mode was implemented by #6811.
This work is based on #6782, which implemented the pre-restart part
and settled the foundations for the post-restart part (behavioral
changes, GR exit conditions, and on-exit actions).
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ospf`
EXEC-level command needs to be issued before restarting the ospfd
daemon (there's no specific requirement on how the daemon should
be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospfd is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This replaces the external libsystemd dependency with... pretty much the
same amount of built-in code. But with one fewer dependency and build
switch needed.
Also check `JOURNAL_STREAM` for future logging integration.
Signed-off-by: David Lamparter <equinox@diac24.net>
There are a few places in the code where we use PREFIX_COPY(_IPV4/IPV6)
macro to copy a prefix. Let's always use prefix_copy function for this.
This should fix CID 1482142 and 1504610.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Adding defensive code to the interface_link_params zebra callback
to check if the link params changed before taking action.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Adding a `\n' should now produce a warning. Controlled by `-Werror` so
if you're doing a dev build and it's warning about some `prefix2str`
that should be converted to `%pFX`, you can turn off `-Werror` to fix it
later like with all other warnings.
Signed-off-by: David Lamparter <equinox@diac24.net>
This might be faster if at some point in the future the Linux vDSO
supports CLOCK_THREAD_CPUTIME_ID without making a syscall. (Same
applies for other OSes.)
Signed-off-by: David Lamparter <equinox@diac24.net>
...really no reason to force this into a compile time decision. The
only point is avoiding the getrusage() syscall, which can easily be a
runtime decision.
[v2: also split cputime & walltime limits]
Signed-off-by: David Lamparter <equinox@diac24.net>
Use this noop decoder for const values (since we can't mutate a const
value passed into frrscript_call anyways) or values we don't want to
write a decoder for.
Signed-off-by: Donald Lee <dlqs@gmx.com>
This is an example of creating encoders and decoders for user defined
structs and registering them in the ENCODE_ARGS DECODE_ARGS macro
in frrscript.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Split existing lua_to* functions into two functions:
- lua_decode_*: unmarshall Lua values into an existing C data structure
- lua_to*: allocate *and* unmarshall Lua values into C data structure
This allows us to mutate C data structures passed into frrscript_call,
without allocation
Signed-off-by: Donald Lee <dlqs@gmx.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
glibc removed its pid cache a while back, and grabbing this from TLS is
faster than repeatedly calling the kernel...
Also use `intmax_t` which is more appropriate for both PID & TID.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since the file targets append one anyway, save them some extra work.
syslog can use `%.*s` since it's "forced" printf by API anyway.
Signed-off-by: David Lamparter <equinox@diac24.net>
printfrr() recently acquired the capability to record start/end of
formatting outputs. Make use of this in the zlog code so logging
targets have access to this information.
(This also records how long the `[XXXXX-XXXXX][EC 9999999]` prefix was
so log targets can choose to skip over it.)
Signed-off-by: David Lamparter <equinox@diac24.net>
`log-filter WORD` was giving me a serious headache since it also matches
`log WORD` due to the way the CLI token handling works. This meant that
a mistyped `log something` command would silently be interpreted as a
filter string, causing me serious headscratching and WTFs until I
figured what was going on.
Remove this UX pitfall so noone else falls into it. (Since the command
was never saved to config, renaming it shouldn't cause trouble.)
[Also I apparently forgot to update the docs when I transferred this
over to the new zlog bits...]
TODO for a rainy day: since we collect all the CLI commands anyway, we
should warn somewhere for "2nd level ambiguous" commands like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
Almost all functions currently marked with pure attribute acquire a
route_node lock. By marking them pure we allow compiler to optimize the
code and not call them when it already knows the return value. This is
completely incorrect.
Only two of eleven functions can be marked as pure. And they still won't
be optimized because they are never called from the same function twice.
Let's remove the ext_pure macro completely to reduce the chance of
repeating this mistake in the future.
Fixes#8866, #8809, #8595, #6992.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This commit fixes the following problem:
- enter the interface node
- move the interface to another VRF
- try to continue configuring the interface
It is not possible to continue configuration because the XPath stored in
the vty doesn't correspond with the actual state of the system anymore.
For example:
```
nfware# conf
nfware(config)# interface enp2s0
<-- move the enp2s0 to a different VRF -->
nfware(config-if)# ip router isis 1
% Failed to get iface dnode in candidate DB
```
To fix the issue, go through all connected vty shells and update the
stored XPath.
Suggested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Always terminate default VRF last during FRR shutdown.
On shutdown we were simply looping over the RB tree and terminating
VRFs from the ROOT. This is not guaranteed to be the default last ever.
Instead switch to RB_SAFE and skip the default VRF till the very end.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The %p printf format specifier does already print the pointer address
with a leading "0x" prefix (indicating a hexadecimal number). There's
no need to add that prefix manually.
While here, replace explicit function names in log messages by
__func__.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- Add following set clause for route-maps
"set evpn gateway-ip <ipv4|ipv6 >A.B.C.D|X:X::X:X"
- When this route-map is applied as outboubd policy in BGP, it will set the
gateway-ip in BGP attribute For EVPN type-5 routes.
Example configuration:
route-map RMAP-EVPN_GWIP permit 5
set evpn gateway-ip ipv4 50.0.2.12
set evpn gateway-ip ipv6 50:0:2::12
router bgp 101
bgp router-id 10.100.0.1
neighbor 10.0.1.2 remote-as 102
!
address-family l2vpn evpn
neighbor 10.0.1.2 activate
neighbor 10.0.1.2 route-map RMAP-EVPN_GWIP out
advertise-all-vni
exit-address-family
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Fix the following address sanitizer crash when running the command `find`:
ERROR: AddressSanitizer: dynamic-stack-buffer-overflow
WRITE of size 1 at 0x7fff4840fc1d thread T0
0 in print_cmd ../lib/command.c:1541
1 in cmd_find_cmds ../lib/command.c:2364
2 in find ../vtysh/vtysh.c:3732
3 in cmd_execute_command_real ../lib/command.c:995
4 in cmd_execute_command ../lib/command.c:1055
5 in cmd_execute ../lib/command.c:1219
6 in vtysh_execute_func ../vtysh/vtysh.c:486
7 in vtysh_execute ../vtysh/vtysh.c:671
8 in main ../vtysh/vtysh_main.c:721
9 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
10 in _start (/usr/bin/vtysh+0x21f64d)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Test uses staticd which required some C++ header protections.
Additionally, the test also runs in the ubuntu20 docker container as
grpc is supported there by the packaging system.
Signed-off-by: Christian Hopps <chopps@labn.net>
When the VRF node is exited using "exit" or "quit", there's still a VRF
pointer stored in the vty context. If you try to configure some router
related command, it will be applied to the previous VRF instead of the
default VRF. For example:
```
(config)# vrf test
(config-vrf)# ip router-id 1.1.1.1
(config-vrf)# do show run
...
!
vrf test
ip router-id 1.1.1.1
exit-vrf
!
...
(config-vrf)# exit
(config)# ip router-id 2.2.2.2
(config)# do show run
...
!
vrf test
ip router-id 2.2.2.2
exit-vrf
!
...
```
`vrf-exit` works correctly, because it stores a pointer to the default
VRF into the vty context (but weirdly keeping the VRF_NODE instead of
changing it to CONFIG_NODE).
Instead of relying on the behavior of exit function, always use the
default VRF when in CONFIG_NODE.
Another problem is missing `VTY_CHECK_CONTEXT`. If someone deletes the
VRF in which node the user enters the command, then zebra applies the
command to the default VRF instead of throwing an error.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, we output the command exactly how it is defined in DEFUN.
We shouldn't output varnames and excessive whitespace.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
https://github.com/FRRouting/frr/pull/5865#discussion_r597670225
As this comment says. ZEBRA_FLAG_XXX should not have been used.
To communicate SRv6 Route Information. A simple Nexthop Flag would
have been sufficient for SRv6 information. And I fixed the whole
thing that way.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
I agree with the PR review from mstap and merged
the following two functions into one.
- zapi_nexthop_seg6_cmp
- zapi_nexthop_seg6local_cmp
[note]
If both of them have more complex extensions in the future,
I think it will be less confusing to remove the integration
of these functions and make them as separate functions as
before.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add usuful function to configure SRv6 localsid
which is represented with seg6local lwt route.
Now, it can support only NEXTHOP_TYPE_IFINDEX route.
Actual configurationof SRv6 localsid is performed with
ZEBRA_ROUTE_ADD. So this is just a wrapper function
for route-install.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add new nexthop's addional object for SRv6
routing about seg6 route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6 routes.
seg6 routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at
this commit. later commit add that. This commit add
only nexthop additional object and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new structures for
SRv6-locator. This structure will be used by zebra and another
routing daemon and its ZAPI messaging to manage SRv6-locator.
Encoder/decoder for ZAPI stream is also added by this commit.
Real configuration mechanism isn't implemented at this commit.
later commit add real configure implementation. This commit add only
SRv6-locator's structures and misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new nexthop's addional
object for SRv6 routing about seg6local route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6local routes.
seg6local routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at this commit.
later commit add that. This commit add only nexthop additional object
and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Make seg6local_context2str function's prototype better.
This function is added on commit e496b4203, and function
interface's considering wasn't enough.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
The code that actually calls FRR northbound functions needs to be running in the
master thread. The previous code was running on a GRPC pthread. While fixing
moved to more functional vs OOP to make this easier to see.
Also fix ly merge to merge siblings not throw the originals away.
Signed-off-by: Christian Hopps <chopps@labn.net>
Never send an interface name/index for multihop sessions. It breaks
"neighbor A.B.C.D update-source" config in BGP.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There are two possible use-cases for the `vrf_bind` function:
- bind socket to an interface in a vrf
- bind socket to a vrf device
For the former case, there's one problem - success is returned when the
interface is not found. In that case, the socket is left unbound without
throwing an error.
For the latter case, there are multiple possible problems:
- If the name is not set, then the socket is left unbound (zebra, vrrp).
- If the name is "default" and there's an interface with that name in the
default VRF, then the socket is bound to that interface.
- In most daemons, if the router is configured before the VRF is actually
created, we're trying to open and bind the socket right after the
daemon receives a VRF registration from zebra. We may not receive the
VRF-interface registration from zebra yet at that point. Therefore,
`if_lookup_by_name` fails, and the socket is left unbound.
This commit fixes all the issues and updates the function description.
Suggested-by: Pat Ruddy <pat@voltanet.io>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Prior to this commit, updating a prefix-list that is referenced by a
route-map clause will unconditionally delete the root node of that
route-map's prefix-tree (used with route-map optimization).
This is problematic because routes not matching a more specific node
in the tree (i.e. other prefix-list sequences) will not fall-back to
the default node, thus they will not hit any route-map sequences.
This commit ensures that an update to a prefix-list will only delete
the default node while adding the first/only seq to the list.
Example config:
========
ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16
ip prefix-list peer475-out-pfxlist seq 50 permit 0.0.0.0/0
!
route-map peer475-out permit 5
match ip address prefix-list peer475-out-pfxlist
Before:
========
ub20# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20# conf t
ub20(config)# ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16 le 32
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
2.138.0.0/16 (2)
(P)
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
2.138.0.0/16 (2)
(P)
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)#
After:
========
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)# ip prefix-list peer475-out-pfxlist seq 45 permit 2.138.0.0/16 le 32
ub20(config)# do show route-map peer475-out prefix-table
ZEBRA:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
BGP:
IPv4 Prefix Route-map Index List
_______________ ____________________
0.0.0.0/0 (2)
(P)
peer475-out seq 5
2.138.0.0/16 (2)
(P) 0.0.0.0/0
peer475-out seq 5
IPv6 Prefix Route-map Index List
_______________ ____________________
ub20(config)#
Fixes: 8410
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
lyd_merge_tree replaces dest siblings with source siblings, not what we
want. Instead lyd_merge_siblings to keep both. Instead lyd_merge_siblings
to keep both.
Signed-off-by: Christian Hopps <chopps@labn.net>
This includes community and large-community data.
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:23 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65030
Communities : 65001:1 65001:2 65001:3 65001:4 65001:5 65001:6
Large-Communities: 65001:123:1 65001:123:2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Track 'down' state of connected addresses with a new flag. We
may have multiple addresses on an interface that share a prefix;
in those cases, we need to determine when the first address
is valid, to install a connected route, and similarly detect
when the last address goes 'down', to remove the connected
route.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When specifying only an "le" for an existing ip prefix-list qualified with
both an "le" and "ge" make sure to remove the "ge" property so it does
not stay in the tree.
E.g. Saying these two things in order:
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18 le 24
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18
... should result in the second statement "overwriting" the first like
this:
vxdev-arch# do show ip prefix-list
ZEBRA: ip prefix-list foobar: 3 entries
seq 1 permit 15.0.0.0/16 ge 18
Previously this did not happen and "le" would stick around since it was
never given NB_OP_DESTROY and purged from the data tree.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The distribute_list_init command is not used and is setup
code that will never be used because it makes assumptions about
how distribute-lists work that are fundamentally incorrect.
Remove the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Abstract the parsing of distribute lists so that we
don't have as much cut-n-paste code.
This is a setup commit for future work. In effect
current distribute-list handling is all kinds of messed up
a) eigrp and babel both attempt to use distribute-lists, they just plain
don't work.
b) `distribute-list` is only sent to rip. `ipv6 distribute-list`
is sent to ripngd. If you use `distribute-list` under `router ripng`
it sends the command to rip but ripd is in the wrong mode and it
never works.
c) Should ripngd care about v4 and v6 specific distribute-lists?
This dichotomy was added for babel but babel has been broke
about this since day 1( see a ).
All in all we need to unwind this whole mess. Make distribute-list
commands specific to the daemons( so that we can be in the right
sub-mode ). But the parsing is going to be the same across all
daemons. So let's provide that functionality in `lib/distribute.c`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a simpler, more limited nexthop comparison function. This
compares a few key attributes, such as vrf, gateway, labels.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
pimd was the only user of this function, and that has gone away now.
So just kill the function.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These hoops to get warnings for mis-printing `uint64_t` are apparently
breaking some C++ bits...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The previous method, using zassert.h and hoping nothing includes
assert.h (which, on glibc at least, just does "#undef assert" and puts
its own definition in...) was fragile - and actually broke undetected.
Just provide our own assert.h and control overriding by putting it in a
separate directory to add to the include path (or not.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When an operator encounters a situation where the number
of FD's open is greater than what we have been configured
to legitimately handle via uname or the `--limit-fds` command
line, abort with a message that they should be able to
debug and figure out what is going on.
Fixes: #8596
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
flush netlink related dependencies with gre information.
Add some linux headers required to compile with it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
3 new gre commands are available:
- GRE_GET to permit a daemon to retrieve gre information.
- GRE_UPDATe is the reply message from zebra to the daemon. as it is a
syncronous request, the GRE_GET expected will have to match the vrf id
where the gre information is wished. this has an impact on label
manager with change in APIs.
- SET_GRE_SOURCE. this command will be stubbed for now, assuming that
the gre interface is set accordingly by external script.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Description:
This looks broken after NB changes in routemap. When routemap
action modified from permit to deny, it is expected to apply
the new action on the filtered routes before the action in the
routemap data structure has been changed. But currently this is
not handled by the corresponding northbound API.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Use unsigned value for all RA requests to Zebra
- encoding signed int as unsigned is bad practice
- RA interval is never, and should never be, negative
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Don't uninstall sessions if the address, interface, VRF or TTL didn't change.
Update the library documentation to make it clear to other developers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Currently this flag is only helpful in an extremely rare situation when
the BFD session registration was unsuccessful and after that zebra is
restarted. Let's remove this flag to simplify the API. If we ever want
to solve the problem of unsuccessful registration/deregistration, this
can be done using internal flags, without API modification.
Also add the error log to help user understand why the BFD session is
not working.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Creating any threads before we fork() into the background (if `-d` is
given) is an extremely dangerous footgun; the threads are created in
the parent and terminated when that exits.
This is extra dangerous because while testing, you'd often run the
daemon in foreground without `-d`, and everything works as expected.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... for any initialization that needs to run after forking, but that
would be racy if it were just scheduled on the thread_master (since the
config load is also just a thread callback, ordering would be undefined
for another scheduled thread callback.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
very_late_init doesn't really say what this does, config_post is much
more descriptive. (A config_pre is coming in a jiffy.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The (legacy) code for reading split configs tries to execute config
commands in parent nodes, but doesn't call the node_exit function when
it goes up to a parent node. This breaks BGP RPKI setup (and extended
syslog, which is in the next commit.)
Doing this correctly is a slight bit involved since the node_exit
callbacks should only be called if the command is actually executed on a
parent node.
Signed-off-by: David Lamparter <equinox@diac24.net>
If the last message in a batched logging operation isn't printed due to
priority, this skips the code that flushes prepared messages through
writev() and can trigger the assert() at the end of zlog_fd().
Since any logmsg above info priority triggers a buffer flush, running
into this situation requires a log file target configured for info
priority, at least 1 message of info priority buffered, a debug message
buffered after that, and then a buffer flush (explicit or due to buffer
full).
I haven't seen this chain of events happen in the wild, but it needs
fixing anyway.
Signed-off-by: David Lamparter <equinox@diac24.net>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The log module buffers outgoing messages by default; add an
api to turn that off, and emit messages immediately.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
abort() raises SIGABRT, which would confusingly cause a 2nd backtrace to
be printed after the first one...
Signed-off-by: David Lamparter <equinox@diac24.net>
The "xref_p" variables are placed in the "xref_array" section
specifically so they're next to each other and we get an array at the
end. The ASAN redzone that is inserted around global variables is
breaks that since it'd be inserted before and after each of the array
items. So disable the ASAN redzone for these variables (and only these
variables, nothing else should be affected.)
Signed-off-by: David Lamparter <equinox@diac24.net>
- Handle badly formatted messages (don't set `ifp` in that case)
- Handle unread messages (e.g. when family is not don't trigger `assert`)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
A long time ago there was a difference between number-named and string-named
access/prefix-lists. Currently we always treat the name as a string and
there is no need for a separate list for number-named lists.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problems with the current implementation:
* Delete hook is called before the deletion of the access-list from the
master list, which means that daemons processing this hook successfully
find this access-list, store a pointer to it in their structures, and
right after that the access-list is freed. Daemons end up having stale
pointer to the freed structure.
* Route-maps are not notified of the deletion.
This commit fixes both issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The first change in this commit is the processing of the VRF termination.
When we terminate the VRF, we should not delete the underlying interfaces,
because there may be pointers to them in the northbound configuration. We
should move them to the default VRF instead.
Because of the first change, the VRF interface itself is also not deleted
when deleting the VRF. It should be handled in netlink_link_change. This
is done by the second change.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we have a "route-map optimization" command which is entered
from inside the route-map entry but actually applies to the whole
route-map. In addition, this command is not shown in the running-config
and not stored to the startup-config during "write".
Let's add a new command on the config node level to control this setting
and show it in the running-config to make possible to save it during
"write".
The old command is saved for the backward compatibility but hidden and
marked as deprecated.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this api is needed for nhrp. the goal is to implement it in zebra, while
other daemon will used it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch implements new zapi api to get neighbor information that zebra knows
and that other daemons may need to know. Actually, nhrp daemons is
interested in getting the neighbor information on gre interfaces, and
the API will be used for that.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We should delete the access-list when the last entry and remark is
deleted. This is already done for prefix-lists.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We delete the prefix-list when its last entry is deleted, but the check
is missed when we delete the description.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
CLI must never use operational data, because this won't work in
transactional mode. Rework search for prefix-list/access-list entries
using only candidate config.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The frr_zmq shim was trying to use some internal scheduling
macros, and that was causing trouble. Just use the public
apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This wasn't quite formatting IPv6+port in a useful way (no brackets),
and printing the scope ID (interface index) and unix addrs is useful
too.
Signed-off-by: David Lamparter <equinox@diac24.net>
These are for string quoting (`%pSQ`) and string escaping (`%pSE`); the
sets / escape methods are currently rather "basic" and might be extended
in the future.
Signed-off-by: David Lamparter <equinox@diac24.net>
Analogous to Linux kernel `%pV` (but our mechanism expects 2 specifier
chars and `%pVA` is clearer anyway.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... to suppress the warnings when using something that isn't quite ISO C
compatible and would otherwise cause compiler warnings from `-Wformat`.
Signed-off-by: David Lamparter <equinox@diac24.net>
With 0 currently the default value for the width specifier, it's not
possible to discern that from a %*p where 0 was passed as the length
parameter. Use -1 to allow for that.
Signed-off-by: David Lamparter <equinox@diac24.net>
This commit introduces the changes to the library route-map
north-bound callback implementation in order to align it to
the modified yang definitions.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
The checks were incorrectly removed in commit 4d2f546f under the
assumption that it is needed only in CLI. Actually the checks are needed
for the case when the sequence number is explicitly set by a user.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There was an attempt to consolidate the code in commit fae60215, but the
work was not actually finished and some necessary checks were missed.
Let's finish it.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This is to fix the crash reproduced by the following steps:
* ip link add red type vrf table 1
Creates VRF.
* vtysh -c "conf" -c "vrf red"
Creates VRF NB node and marks VRF as configured.
* ip route 1.1.1.0/24 2.2.2.2 vrf red
* no ip route 1.1.1.0/24 2.2.2.2 vrf red
(or similar l3vni set/unset in zebra)
Marks VRF as NOT configured.
* ip link del red
VRF is deleted, because it is marked as not configured, but NB node
stays.
Subsequent attempt to configure something in the VRF leads to a crash
because of the stale pointer in NB layer.
Fixes#8357.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
clang does not accept __attribute__((transparent_union)) in C++ source
code. We don't need it there anyway so let's just limit it to C.
Signed-off-by: David Lamparter <equinox@diac24.net>
This replaces `%n` with a safe, out-of-band option that simply records
the start and end offset of the output produced for each `%...`
specifier.
The old `%n` code is removed.
Signed-off-by: David Lamparter <equinox@diac24.net>
Allowing printfrr extensions to directly write to the output buffer has
a few advantages:
- there is no arbitrary length limit imposed (previously 64)
- the output doesn't need to be copied another time
- the extension can directly use bprintfrr() to put together pieces
The downside is that the theoretical length (regardless of available
buffer space) must be computed correctly.
Extended unit tests to test these paths a bit more thoroughly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Incorporate into the `show thread cpu` the number of times
we have issued warnings about a particular thread being
too slow.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When generating SLOW_THREAD warnings let's differentiate between
a cpu bound process and a wall bound process. Effectively
a slow thread can now be a process in FRR doing lots of work( cpu bound )
or wall bound ( the cpu is heavy load and a FRR process may be pre-empted
and never scheduled ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
EVPN nexthops are installed as remote neighs by zebra. This was earlier
done only via VRF IPvX uni routes imported from EVPN routes.
With EVPN-MH these VRF routes now reference a L3NHG which is setup based
on the EAD and doesn't include the RMAC. To workaround that BGP now
consolidates and maintains EVPN nexthops which are then sent to zebra.
zebra sets up these nexthops as L3-VNI nh entries using a dummy type-1
route as reference.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Before the transition of prefix-lists to northbound, this setting
controlled whether sequence numbers were displayed in the config.
After the transition, sequence numbers are always displayed in the
configuration, and this command only controls the output of the show
commands, which is not very useful. This command is not even shown in
the config anymore.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Make the local buffer offered to printfrr extension tokens
bigger; existing size wasn't quite enough for some of the
more elaborate struct prefix types.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
New BFD protocol integration API with abstractions to fix most common
protocol integration errors:
- Set address family together with the source/destination addresses
- Set the TTL together with the single/multi hop option
- Set/unset profile/interface easily
- Keep the arguments so we don't have to rebuild them every time
- Install/uninstall functions that keep track of current state so the
daemon doesn't have to
- Reinstall when critical configuration changes (address, multi hop
etc...)
- Reconfigure BFD when the daemon restarts automatically
- Automatically calls the user defined callback for session update
- Shutdown handler for all protocols
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add new status for Vertex, Edge and Subnet to manage their
respective states in the data base.
Add new functions:
- to register/unregister server and client
- to show content of the Database (VTY and Json output)
- to update and compare subnets
- to clean vertex and ted from ORPHAN elements
- to convert message or stream into a Link State Element and update
Link State Database accordingly to message event
Change Edge and Vertex key computation by using the host order systematically.
This impact mostly key based on IPv4 addresses where `ntohl()` function must
be used when searching a Vertex or Edge by key.
Update the documentation accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This logs the unique ID prefix from the xref that each log message call
has, and adds on/off knobs for both EC and unique ID printing.
Signed-off-by: David Lamparter <equinox@diac24.net>
This parametrized use of flog with variable EC and priority doesn't mesh
particularly well with the xref code & there isn't really much reason to
not use fixed/constant calls like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
Just small utilities for when you already have a struct fbuf (i.e. when
bprintfrr() is used to construct longer text from multiple pieces.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Accept macros without ; for LabN CI *only*. This is a bit hairy since
we can't generate warnings for this, so it's very limited in both scope
and duration.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
The point of the `-std=gnu99` was to override a `-std=c99` that may be
coming in from net-snmp. However, we want C11, not C99.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Implement new ringbuf function to do the proper socket reads without
the need of intermediary buffers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Problem:
Prefix-list with mulitiple rules, an update to
a rule/sequence with different prefix/prefixlen
reset prefix-list next-base pointer to avoid
having stale value.
In some case the old next-bast's reference leads
to an assert in tri (trie_install_fn ) add.
bt:
(object=0x55576a4c8a00, updptr=0x55576a4b97e0) at lib/plist.c:560
(plist=0x55576a4a1770, pentry=0x55576a4c8a00) at lib/plist.c:585
(ple=0x55576a4c8a00) at lib/plist.c:745
(args=0x7fffe04beb50) at lib/filter_nb.c:1181
Solution:
Reset prefix-list next-base pointer whenver a
sequence/rule is updated.
Ticket:CM-33109
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
In prefix-list nortbound callback's validation
phase, use type as enum rather string for better
performance.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Following patch
" lib: disallow access list duplicated values"
introduce a libyang dnode iterator for every prefix-list
config which adds an overhead of traversal all prefix dnodes
and degrades the performance in scaled prefix-list config.
This check is not necessary in prefix-list northbound callbacks
as there won't be a case where prefix-list config comes to nb
callback without sequence number.
The dup check is only necessary for the vtysh case for backward
compatiblity reason where cli can be accepted without sequence number.
Ticket: CM-32035
Reviewed By: CCR-11096
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Remove when statements from prefix-list yang OM,
and do the same check in frr validation phase.
This helps a bit in perfomance of prefix-lists
scale config.
Ticket:CM-32035
Reviewed By:CCR-11096
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Instead of crashing, print "NULL" when printfrr callback for
nexthops is called for a NULL nexthop argument.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Example:
```
show yang operational-data /frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-staticd:staticd'][name='staticd'][vrf='default'] staticd
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Apparently you can do `#__VA_ARGS__` and it actually does something
sensible, so here we go recording the format parameters for log messages
into the xref.
This allows some more checking in xrelfo.py, e.g. hints to use `%pFX`
and co.
Signed-off-by: David Lamparter <equinox@diac24.net>
This adds _clippy.ELFFile, which provides a fast wrapper around libelf.
The API is similar to / a subset of pyelfutils, which unfortunately is
painfully slow (to the tune of minutes instead of seconds.)
The idea is that xrefs can be read out of ELF files by reading out the
"xref_array" section or "FRRouting/XREF" note.
Signed-off-by: David Lamparter <equinox@diac24.net>
When the control plane protocol is created, the vrf structure is
allocated, and its address is stored in the northbound node.
The vrf structure may later be deleted by the user, which will lead to
a stale pointer stored in this node.
Instead of this, allow daemons that use the vrf pointer to register the
dependency between the control plane protocol and vrf nodes. This will
guarantee that the nodes will always be created and deleted together, and
there won't be any stale pointers.
Add such registration to staticd and pimd.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When handling a large number of events at one time
FRR will call monotime and getrusage 2 times for each
event. With this change modify the code to change
this to (X events / 2) + 1 calls of getrusage and monotime
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since some recent commit, building c++ code attempting to use zlog_debug
(or any other level) would fail with the following complaint:
lib/zlog.h:91:3: sorry, unimplemented: non-trivial designated
initializers not supported
};
^
lib/zlog.h:105:26: note: in expansion of macro ‘_zlog_ref’
#define zlog_debug(...) _zlog_ref(LOG_DEBUG, __VA_ARGS__)
This is due to out-of-order initialization of the xrefdata struct
fields. Setting them all in the order in which they are defined
fixes the issue.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
When running clippy, the main function in it's
error path could leak the memory pointed to by name.
Fix this. This was/is reported by clang SA.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Only ask the event-loop poll() to awaken if a newly-added timer
actually might have changed the required timeout. Also compute
timer deadline outside of mutex locks.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The existing code was using the oid2in_addr API to copy IPv6
addresses passing an IPv6 length. Create a utility to do this
properly and avoid annoying coverity with type checking.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Adding agentx_enabled hook.
This permits the main LDP process to signal the lde and ldpe
processes when agentx is enabled.
Signed-off-by: Karen Schoener <karen@voltanet.io>
CR, NL and CRNL are all OK, but CRNL shouldn't get treated as 2
newlines (which causes an empty command to be executed => empty prompt
line.)
Signed-off-by: David Lamparter <equinox@diac24.net>
The FDs are in struct vty, and there's ->fd and ->wfd, which shouldn't
be confused. Passing vty_sock along separately just creates mixups.
Signed-off-by: David Lamparter <equinox@diac24.net>
The return code from smux_trap is never used. If we have
never used it after all this time. Remove the return from
the function.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
The logging code writes log messages with a `\n` line ending, meanwhile
the VTY code switches it so you need `\r\n`...
And we don't flush the newline after executing a command either.
After this patch, starting daemons like `zebra/zebra -t` should provide
a nice development/debugging experience with a VTY open right there on
stdio and `log stdout` interspersed.
(This is already documented in the man pages, it just looked like sh*t
previously since the log messages didn't newline correctly.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... in case the user does something like `zebra 3>logfile`. Also useful
for some module purposes, maybe even feeding config at some point in the
future.
Signed-off-by: David Lamparter <equinox@diac24.net>
This command doesn't rely on transactional CLI and works perfectly for
daemons converted to northbound configuration.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
mallinfo() is deprecated as of glibc 2.33 and emits a warning if used.
Support mallinfo2() if available.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
The VRF must be marked as configured when user enters "vrf NAME" command.
Otherwise, the following problem occurs:
`ip link add red type vrf table 1`
VRF structure is allocated.
`vtysh -c "conf t" -c "vrf red"`
`lib_vrf_create` is called, and pointer to the VRF structure is stored
to the nb_config_entry.
`ip link del red`
VRF structure is freed (because it is not marked as configured), but
the pointer is still stored in the nb_config_entry.
`vtysh -c "conf t" -c "no vrf red"`
Nothing happens, because VRF structure doesn't exist. It means that
`lib_vrf_destroy` is not called, and nb_config_entry still exists in
the running config with incorrect pointer.
`ip link add red type vrf table 1`
New VRF structure is allocated.
`vtysh -c "conf t" -c "vrf red"`
`lib_vrf_create` is NOT called, because the nb_config_entry for that
VRF name still exists in the running config.
After that all NB commands for this VRF will use incorrect pointer to
the freed VRF structure.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Extend the thread_cancel_event api so that it's more complete:
look in all the lists of events, including io and timers, for
matching tasks. Add a limited version of the api that only
examines tasks in the event and ready queues.
BGP appears to require the old behavior, so change its macro
to use the more limited cancel api.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
No reason for the thread/task cancellation struct to be public:
move it out of the header file. Also add a flags field.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Valgrind reports:
469901-==469901==
469901-==469901== Conditional jump or move depends on uninitialised value(s)
469901:==469901== at 0x3A090D: bgp_bfd_dest_update (bgp_bfd.c:416)
469901-==469901== by 0x497469E: zclient_read (zclient.c:3701)
469901-==469901== by 0x4955AEC: thread_call (thread.c:1684)
469901-==469901== by 0x48FF64E: frr_run (libfrr.c:1126)
469901-==469901== by 0x213AB3: main (bgp_main.c:540)
469901-==469901== Uninitialised value was created by a stack allocation
469901:==469901== at 0x3A0725: bgp_bfd_dest_update (bgp_bfd.c:376)
469901-==469901==
469901-==469901== Conditional jump or move depends on uninitialised value(s)
469901:==469901== at 0x3A093C: bgp_bfd_dest_update (bgp_bfd.c:421)
469901-==469901== by 0x497469E: zclient_read (zclient.c:3701)
469901-==469901== by 0x4955AEC: thread_call (thread.c:1684)
469901-==469901== by 0x48FF64E: frr_run (libfrr.c:1126)
469901-==469901== by 0x213AB3: main (bgp_main.c:540)
469901-==469901== Uninitialised value was created by a stack allocation
469901:==469901== at 0x3A0725: bgp_bfd_dest_update (bgp_bfd.c:376)
On looking at bgp_bfd_dest_update the function call into bfd_get_peer_info
when it fails to lookup the ifindex ifp pointer just returns leaving
the dest and src prefix pointers pointing to whatever was passed in.
Let's do two things:
a) The src pointer was sometimes assumed to be passed in and sometimes not.
Forget that. Make it always be passed in
b) memset the src and dst pointers to be all zeros. Then when we look
at either of the pointers we are not making decisions based upon random
data in the pointers.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This didn't exist yet when the xref code came around, and since
frrtrace() gets collapsed to nothing by the preprocessor when
tracepoints are disabled, it didn't cause any compiler errors...
Signed-off-by: David Lamparter <equinox@diac24.net>
gcc fucks up global variables with section attributes when they're used
in templated C++ code. The template instantiation "magic" kinda breaks
down (it's implemented through COMDAT in the linker, which clashes with
the section attribute.)
The workaround provides full runtime functionality, but the xref
extraction tool (xrelfo.py) won't work on C++ code compiled by GCC.
FWIW, clang gets this right.
Signed-off-by: David Lamparter <equinox@diac24.net>
The function smux_trap only allows the paaasin of one index which is
applied to all indexed objects. However there is a requirement for
differently indexed objects within a singe trap. This commit
introduces a new function smux_trap_multi_index which can be called
with an array of indices. If this array is onf length 1 the original
smux_trap behaviour is maintained. smux_trap now calls the new
function with and index array length of 1 to avoid changes to
existing callers.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add defines for IANA SNMP routing protocol values
Add macro for returning an IPv6 address to the SNMP agent.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add if_vrf_lookup_by_index_next to get the next ifindex in a vrf
given the previous ifindex or 0 for the first.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add SNMP support for L3vpn Vrf table as defined in [RFC4382]
Keep track of vrf status for the table and for future traps.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Run through the vrf's interface list and return a count, skipping
the l3mdev which has a name which matches the vrf name.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
We don't use `%n` anywhere, so the only purpose it serves is enabling
exploits.
(I thought about this initially when adding printfrr, but I wasn't sure
we don't use `%n` anywhere, and thought I'll check later, and then just
forgot it...)
Signed-off-by: David Lamparter <equinox@diac24.net>
Description: When we get a new vrf add and vrf with same name, but different vrf-id already
exists in the database, we should treat vrf add as update.
This happens mostly when there are lots of vrf and other configuration being replayed.
There may be a stale vrf delete followed by new vrf add. This
can cause timing race condition where vrf delete could be missed and
further same vrf add would get rejected instead of treating last arrived
vrf add as update.
Treat vrf add for existing vrf as update.
Implicitly disable this VRF to cleanup routes and other functions as part of vrf disable.
Update vrf_id for the vrf and update vrf_id tree.
Re-enable VRF so that all routes are freshly installed.
Above 3 steps are mandatory since it can happen that with config reload
stale routes which are installed in vrf-1 table might contain routes from
older vrf-0 table which might have got deleted due to missing vrf-0 in new configuration.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
This allows grabbing a list of all DEFUNs and their help texts through
the xref extraction mechanics.
Signed-off-by: David Lamparter <equinox@diac24.net>
This allows extracting a list of all log messages including their ECs
and autogenerated unique IDs for them.
Signed-off-by: David Lamparter <equinox@diac24.net>
