Fixes the following compilation errors:
In file included from /home/ruslan/sdk/sysroots/corei7-64-poky-linux/usr/include/libyang/tree_data.h:30,
from /home/ruslan/sdk/sysroots/corei7-64-poky-linux/usr/include/libyang/context.h:22,
from /home/ruslan/sdk/sysroots/corei7-64-poky-linux/usr/include/libyang/libyang.h:24,
from ../../src/frr/lib/yang.h:25,
from ../../src/frr/lib/northbound.h:27,
from ../../src/frr/lib/vty.h:36,
from ../../src/frr/lib/ferr.h:28,
from ../../src/frr/lib/lib_errors.h:24,
from ../../src/frr/lib/northbound_confd.c:23:
../../src/frr/lib/northbound_confd.c: In function 'frr_confd_init_cdb':
../../src/frr/lib/northbound_confd.c:533:28: error: 'const struct lys_module' has no member named 'data'
533 | LY_LIST_FOR (module->info->data, snode) {
| ^~
../../src/frr/lib/northbound_confd.c: In function 'frr_confd_data_get_next_object':
../../src/frr/lib/northbound_confd.c:921:3: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
921 | LY_LIST_FOR (lysc_node_child(nb_node->snode), child) {
| ^~~~~~~~~~~
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
We had various forms of min/max macros across multiple daemons
all of which duplicated what we have in compiler.h. Convert
everyone to use the `correct` ones
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, we automatically delete an inactive VRF when its last
interface is deleted. This code introduces a couple of crashes because
of the following problems:
- vrf_delete is called before calling if_del hook, so daemons may try to
dereference an ifp->vrf pointer which is freed
- in if_terminate, we continue to use the VRF in the loop condition
after the last interface is deleted
This check is needed only when the interface is deleted by the user,
because if the interface is deleted by the system, VRF must still exist
in the system. Move the check to appropriate places to fix crashes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There are two APIs to control the expected number of hops for a BFD
session – `bfd_sess_set_mininum_ttl` and `bfd_sess_set_hop_count`.
The former is very confusing, as it takes an expected TTL in the
BFD packet which is actually a protocol internal value. The latter is
simple and straightforward – it takes an expected number of hops, which
is always 1 for single-hop and >1 for multi-hop.
As the former API is not used anywhere, just remove it to avoid any
confusion.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
... need to ignore TLS sections, their address is effectively
meaningless but can overlap other sections we actually need to access.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`assert.h` -> `xref.h` -> `typesafe.h` -> `assert.h`
Might be possible to do this more cleanly some way, but that way is not
obvious, so here's the "simple & dumb" approach.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Looks much prettier if `libunwind` is available, but works with glibc or
libexecinfo's `backtrace()` too.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... its only purpose was to serve as a footgun, and all such uses have
been eliminated now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The `struct thread **ref` that the thread code takes is written to and
needs to stay valid over the lifetime of a thread. This does not hold
up if thread pointers are directly put in a `vector` since adding items
to a `vector` may reallocate the entire array. The thread code would
then write to a now-invalid `ref`, potentially corrupting entirely
unrelated data.
This should be extremely rare to trigger in practice since we only use
one c-ares channel, which will likely only ever use one fd, so the
vector is never resized. That said, c-ares using only one fd is just
plain fragile luck.
Either way, fix this by creating a resolver_fd tracking struct, and
clean up the code while we're at it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These are just used to iterate over active vty sessions, a vector is a
weird choice there.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These had no remaining users for a while now. The logging backend has
its own list of receivers.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Constify some BFD library function parameters to signalize they are
not going to get modified.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If the VRF is not enabled, if_terminate deletes the VRF after the last
interface is removed from it. Therefore daemons crash on the subsequent
call to vrf_delete. We should call vrf_delete only for enabled VRFs.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When the netns is deleted, we should always clear the vrf->ns_ctxt
pointer. Currently, it is not cleared when there are interfaces in the
netns at the time of deletion.
If the netns is re-created, zebra crashes because it tries to use the
stale pointer.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The script entries were being stored in a hash lookup with
the script name a pre-defined array of characters. The hash
lookup is succeeding since it is auto-installed at script
start time irrelevant if there is a handler function.
Modify the code so that if the scriptname is an empty
string "\0" just return a NULL so that zebra does
not attempt to actually load up the script
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
ls_node_same, ls_attributes_same and ls_prefix_same are not producing expected
result due to a wrong usage of memcmp. In addition, if respective structures
are not initialized with 0, there is a risk that the comparison failed.
This patch correct usage of memcmp and expand comparison to each invidual
parameters of the respective structure for safer result.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This function doesn't work correctly with netns VRF backend as the same
index may be used in multiple netns simultaneously. So let's hide it
from the public API to reduce temptation to use it instead of writing
the correct code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The fact that the interface name is used in some nexthop config doesn't
mean that the interface is configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
```
exit1-debian-9(config-route-map)# match ip route-source prefix-list ?
<cr>
PREFIXLIST_NAME IP prefix-list name
p1 p2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
zclient_send_localsid is called by various routing protocol daemons. To set the
srv6 endpoint function. Fix a hard-coded error in the initial implementation.
Before this PR, the srv6 function will be registered to zebra as a BGP route
even if isisd executes zclient_send_localsid.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
When writing the config from the NB-converted daemon, we must not rely
on the operational data. This commit changes the output of the interface
configuration to use only config data. As the code is the same for all
daemons, move it to the lib and remove all the duplicated code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Do not return pointer to the newly created thread from various thread_add
functions. This should prevent developers from storing a thread pointer
into some variable without letting the lib know that the pointer is
stored. When the lib doesn't know that the pointer is stored, it doesn't
prevent rescheduling and it can lead to hard to find bugs. If someone
wants to store the pointer, they should pass a double pointer as the last
argument.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The function thread_is_scheduled allows us to know if
the particular thread is scheduled for execution or not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
*_anywhere(item) returns whether an item is on _any_ container. Only
available for unsorted containers for now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Using a non-NULL sentinel allows distinguishing between "end of list"
and "item not on any list". It's a compare either way, just the value
is different.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides a "is this item on this list" check, which may or may not
be faster than using *_find() for the same purpose. (If the container
has no faster way of doing it, it falls back to using *_find().)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some of the typesafe containers didn't null out their innards of items
after an item was deleted or popped off the container. This is both a
bit unsafe as well as hinders the upcoming _member() from working
efficiently.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It allows FRR to read the interface config even when the necessary VRFs
are not yet created and interfaces are in "wrong" VRFs. Currently, such
config is rejected.
For VRF-lite backend, we don't care at all about the VRF of the inactive
interface. When the interface is created in the OS and becomes active,
we always use its actual VRF instead of the configured one. So there's
no need to reject the config.
For netns backend, we may have multiple interfaces with the same name in
different VRFs. So we care about the VRF of inactive interfaces. And we
must allow to preconfigure the interface in a VRF even before it is
moved to the corresponding netns. From now on, we allow to create
multiple configs for the same interface name in different VRFs and
the necessary config is applied once the OS interface is moved to the
corresponding netns.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When something is used only from zebra and part of its description is
"should be called from zebra only" then it belongs to zebra, not lib.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
... to speed up vector_empty_slot() among other things.
Behavior should be 100% identical to previous.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This function doesn't work correctly with netns VRF backend as the same
ifname may be used in multiple netns simultaneously. So let's hide it
from the public API to reduce temptation to use it instead of writing
the correct code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The fact that the interface name is used in some nexthop config doesn't
mean that the interface is configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
To ensure this, add a const modifier to functions' arguments. Would be
great do this initially and avoid this large code change, but better
late than never.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The switch statement over `enum zebra_link_type` had a default
and FRR was missing a few of the pre-defined types we cared about.
Remove the default statement and add the missing values.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We should never pass pointers to local variables to thread_add_* family.
When an event is executed, the library writes into this pointer, which
means it writes into some random memory on a stack.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The current code passes an address of a local variable to `thread_add_read`
which stores it into `thread->ref` by the lib. The next time the thread
callback is executed, the lib stores NULL into the `thread->ref` which
means it writes into some random memory on the stack.
To fix this, we should pass a pointer to the vector entry to the lib.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
`yang_dnode_get` will `assert` if no YANG node/model exist, so lets test for
its existence first before trying to access it.
This `assert` is only acceptable for internal FRR usage otherwise we
might miss typos or unmatching YANG models nodes/leaves. For gRPC usage
we should let users attempt to use non existing models without
`assert`ing.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Since there's very few locations where the `frr-format` actually prints
false positive warnings, consensus seems to be to just work around the
false positives even if the code is correct.
In fact, there is only one pattern of false positives currently, in
`bfdd/dplane.c` which does `vty_out("%"PRIu64, (uint64_t)be64toh(...))`.
The workaround/fix for this is a replacement `be64toh` whose type is
always `uint64_t` regardless of what OS we're on, making the cast
unnecessary.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass down the safi for when we need address
resolution. At this point in time we are
hard coding the safi to SAFI_UNICAST.
Future commits will take advantage of this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
These are no longer really needed. The client just needs
to call nexthop resolution instead.
So let's remove the zapi types.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
After `<daemon_name> is not running` message vtysh does not return
error. For example if you disable ospf in `/etc/frr/daemons` and run
`vtysh -c configure -c "router ospf"` it prints the message to stderr,
but returns 0.
This commit will make vtysh return error when not in interractive mode.
But if you run commands from vtysh, you will still be able to enter
views and exit them if daemon is not running.
Signed-off-by: Yaroslav Fedoriachenko <yar.fed99@gmail.com>
Instead of sorting each command one-by-one using listnode_add_sort, add
them to the list without sorting and then sort the list only once.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
frrmod_load() attempts to dlopen() several possible paths
(constructed from its basename argument) until one succeeds.
Each dlopen() attempt may fail for a different reason, and
the important one might not be the last one. Example:
dlopen(a/foo): file not found
dlopen(b/foo): symbol "bar" missing
dlopen(c/foo): file not found
Previous code reported only the most recent error. Now frrmod_load()
describes each dlopen() failure.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Sometimes it's needed to match by fields of one object but set fields of
another object. The following commit is an example.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
vrf_name_to_id() returned VRF_DEFAULT when the vrf name was
unknown, hiding errors. Per community recommendation, vrf_name_to_id()
is now removed and the few callers now use vrf_lookup_by_name()
directly.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Without this, the hook code creates functions with empty parameter lists
like "void hook_something()", which is not a proper C prototype. It
needs to be "void hook_something(void)". Add some macro shenanigans to
handle that.
... and make the plumbing functions "inline" too.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This fixes some spurious warnings on *BSD, where `elffile_add_dynreloc`
isn't used since `elf_getdata_rawchunk` is not available.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Commit: 4b983eef2c
Modified the zapi send receive of the c-bit to only
be under the HAVE_BFDD. If you are using ptm-bfd
then the decoder function still expects this to be
sent down. This commit puts this behavior back
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This allows defining a CLI command like this:
`[no] some setting ![VALUE]`
with VALUE being optional for the "no" form, but required for the
positive form. It's just a `[...]` where the empty branch can only be
taken for commands starting with `no`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Instead of adding a separate case clause for every node, just find the
node structure in the global list and get its parent node from there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774e ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There were paths where the zmq wrapper lib could call user
callbacks that would free the internal context struct, but the
context was then used in the lib code. Use a boolean to avoid
freeing the context within an application callback.
Restore logic that frees the context within the 'cancel' api.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
The zeromq lib wrapper uses an internal context struct to help
interact with the libfrr event mechanism. When freeing that
context struct, ensure the caller's pointer is also cleared.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
When using "match evpn default-route" rule, match_arg is NULL and strcmp
is not happy with that. There's already a special function named rulecmp
that handles such situations.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, when we check the new prefix-list entry for duplication, we
only take filled in fields into account and ignore optional fields.
For example, if we already have `ip prefix-list A 0.0.0.0/0 le 32` and
we try to add `ip prefix-list A 0.0.0.0/0`, it is treated as duplicate.
We should always compare all prefix-list fields when doing the check.
Fixes#9355.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Previous:
- frrscript_load: push Lua function onto stack
- frrscript_call: calls Lua function
Now:
- frrscript_load: checks Lua function
- frrscript_call: pushes and calls Lua function (first clear the stack)
So now we just need one frrscript_load for consecutive frrscript_call.
frrscript_call does not recompile or reload the script file, it just
keys it from the global Lua table (where it should already be).
Signed-off-by: Donald Lee <dlqs@gmx.com>
When we get a bad value for the opaque data length, instead
of stopping the program, discard the data and move on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When running `make check` against a build that zeromq enabled
the test_zmq unit test was crashing. The commit:
e08165def1
Introduced this crash. Removing the part of the commit
that was causing the crash in the test. This is mainly
to get `make check` working again for those people using
zeromq in their builds.
Fixes: #9176
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When exiting from link-params node, we must not decrement xpath_index
because it is not incremented when entering the node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Will be handy to filter BGP prefixes by using BGP community alias
instead of numerical community values.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
There is some rather heavy error checking logic in frrscript_call. Normally
I'd put this in the _frrscript_call function, but the error checking needs
to happen before the encoders/decoders in the macro are called.
The error checking looks messy but its really just nested ternary
expressions insite a larger statement expression.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Instead of 1 frrscript : 1 lua state, it is changed to 1 : N.
The states are hashed with their function names.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Move `is_default_prefix` variations to `lib/prefix.h` and make the code
use the library version instead of implementing it again.
NOTE
----
The function was split into per family versions to cover all types.
Using `union prefixconstptr` is not possible due to static analyzer
warnings which cause CI to fail.
The specific cases that would cause this failure were:
- Caller used `struct prefix_ipv4` and called the generic function.
- `is_default_prefix` with signature using `const struct prefix *` or
`union prefixconstptr`.
The compiler would complain about reading bytes outside of the memory
bounds even though it did not take into account the `prefix->family`
part.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We are sending up to ZAPI_MESSAGE_OPAQUE_LENGTH but checking
for one less. We know the data will fit in it to that size.
Also we have asserts on the write to ensure we don't go over
it
Fixes: #8995
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There's nothing that can be done here with an error. Try to make
Coverity understand that this is intentional.
(I don't know if the `(void)` will actually fix the coverity warning,
but I don't really have a better way to figure it out beyond just
getting this merged and waiting for a result...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While we do have `show ip prefix-list NAME A.B.C.D/M`, that doesn't
actually run the prefix list matching code. While the result would
hopefully be the same anyway, let's have a way to call the actual prefix
list match code and get a result.
(As an aside, this might be useful for scripting to do a quick "is this
prefix in that prefix list" check.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... the PIM code is kinda misusing prefix lists to match addresses.
Considering the weird semantics of access-lists, I can't fault it.
However, prefix lists aren't great at matching addresses by default,
since they try to match the prefix length too. So, here's an "address
match mode" for prefix lists to get that to work more reasonably.
Fixes: #8492
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RFC 3623 specifies the Graceful Restart enhancement to the OSPF
routing protocol. This PR implements support for the restarting mode,
whereas the helper mode was implemented by #6811.
This work is based on #6782, which implemented the pre-restart part
and settled the foundations for the post-restart part (behavioral
changes, GR exit conditions, and on-exit actions).
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ospf`
EXEC-level command needs to be issued before restarting the ospfd
daemon (there's no specific requirement on how the daemon should
be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospfd is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This replaces the external libsystemd dependency with... pretty much the
same amount of built-in code. But with one fewer dependency and build
switch needed.
Also check `JOURNAL_STREAM` for future logging integration.
Signed-off-by: David Lamparter <equinox@diac24.net>
There are a few places in the code where we use PREFIX_COPY(_IPV4/IPV6)
macro to copy a prefix. Let's always use prefix_copy function for this.
This should fix CID 1482142 and 1504610.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Adding defensive code to the interface_link_params zebra callback
to check if the link params changed before taking action.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Adding the "clear ipv6 ospf6 command" . It resets
the ospfv3 datastructures and clears the database
as well as route tables. It resets the neighborship
by restarting the interface state machine.
If the user wants to change the router-id, this
command updates the router-id to the latest static
router-id and starts the neighbor formation with
the new router-id.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Adding a `\n' should now produce a warning. Controlled by `-Werror` so
if you're doing a dev build and it's warning about some `prefix2str`
that should be converted to `%pFX`, you can turn off `-Werror` to fix it
later like with all other warnings.
Signed-off-by: David Lamparter <equinox@diac24.net>
This might be faster if at some point in the future the Linux vDSO
supports CLOCK_THREAD_CPUTIME_ID without making a syscall. (Same
applies for other OSes.)
Signed-off-by: David Lamparter <equinox@diac24.net>
...really no reason to force this into a compile time decision. The
only point is avoiding the getrusage() syscall, which can easily be a
runtime decision.
[v2: also split cputime & walltime limits]
Signed-off-by: David Lamparter <equinox@diac24.net>
Use this noop decoder for const values (since we can't mutate a const
value passed into frrscript_call anyways) or values we don't want to
write a decoder for.
Signed-off-by: Donald Lee <dlqs@gmx.com>
This is an example of creating encoders and decoders for user defined
structs and registering them in the ENCODE_ARGS DECODE_ARGS macro
in frrscript.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Split existing lua_to* functions into two functions:
- lua_decode_*: unmarshall Lua values into an existing C data structure
- lua_to*: allocate *and* unmarshall Lua values into C data structure
This allows us to mutate C data structures passed into frrscript_call,
without allocation
Signed-off-by: Donald Lee <dlqs@gmx.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
glibc removed its pid cache a while back, and grabbing this from TLS is
faster than repeatedly calling the kernel...
Also use `intmax_t` which is more appropriate for both PID & TID.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since the file targets append one anyway, save them some extra work.
syslog can use `%.*s` since it's "forced" printf by API anyway.
Signed-off-by: David Lamparter <equinox@diac24.net>
printfrr() recently acquired the capability to record start/end of
formatting outputs. Make use of this in the zlog code so logging
targets have access to this information.
(This also records how long the `[XXXXX-XXXXX][EC 9999999]` prefix was
so log targets can choose to skip over it.)
Signed-off-by: David Lamparter <equinox@diac24.net>
`log-filter WORD` was giving me a serious headache since it also matches
`log WORD` due to the way the CLI token handling works. This meant that
a mistyped `log something` command would silently be interpreted as a
filter string, causing me serious headscratching and WTFs until I
figured what was going on.
Remove this UX pitfall so noone else falls into it. (Since the command
was never saved to config, renaming it shouldn't cause trouble.)
[Also I apparently forgot to update the docs when I transferred this
over to the new zlog bits...]
TODO for a rainy day: since we collect all the CLI commands anyway, we
should warn somewhere for "2nd level ambiguous" commands like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
Almost all functions currently marked with pure attribute acquire a
route_node lock. By marking them pure we allow compiler to optimize the
code and not call them when it already knows the return value. This is
completely incorrect.
Only two of eleven functions can be marked as pure. And they still won't
be optimized because they are never called from the same function twice.
Let's remove the ext_pure macro completely to reduce the chance of
repeating this mistake in the future.
Fixes#8866, #8809, #8595, #6992.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This commit fixes the following problem:
- enter the interface node
- move the interface to another VRF
- try to continue configuring the interface
It is not possible to continue configuration because the XPath stored in
the vty doesn't correspond with the actual state of the system anymore.
For example:
```
nfware# conf
nfware(config)# interface enp2s0
<-- move the enp2s0 to a different VRF -->
nfware(config-if)# ip router isis 1
% Failed to get iface dnode in candidate DB
```
To fix the issue, go through all connected vty shells and update the
stored XPath.
Suggested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Always terminate default VRF last during FRR shutdown.
On shutdown we were simply looping over the RB tree and terminating
VRFs from the ROOT. This is not guaranteed to be the default last ever.
Instead switch to RB_SAFE and skip the default VRF till the very end.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The %p printf format specifier does already print the pointer address
with a leading "0x" prefix (indicating a hexadecimal number). There's
no need to add that prefix manually.
While here, replace explicit function names in log messages by
__func__.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- Add following set clause for route-maps
"set evpn gateway-ip <ipv4|ipv6 >A.B.C.D|X:X::X:X"
- When this route-map is applied as outboubd policy in BGP, it will set the
gateway-ip in BGP attribute For EVPN type-5 routes.
Example configuration:
route-map RMAP-EVPN_GWIP permit 5
set evpn gateway-ip ipv4 50.0.2.12
set evpn gateway-ip ipv6 50:0:2::12
router bgp 101
bgp router-id 10.100.0.1
neighbor 10.0.1.2 remote-as 102
!
address-family l2vpn evpn
neighbor 10.0.1.2 activate
neighbor 10.0.1.2 route-map RMAP-EVPN_GWIP out
advertise-all-vni
exit-address-family
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Fix the following address sanitizer crash when running the command `find`:
ERROR: AddressSanitizer: dynamic-stack-buffer-overflow
WRITE of size 1 at 0x7fff4840fc1d thread T0
0 in print_cmd ../lib/command.c:1541
1 in cmd_find_cmds ../lib/command.c:2364
2 in find ../vtysh/vtysh.c:3732
3 in cmd_execute_command_real ../lib/command.c:995
4 in cmd_execute_command ../lib/command.c:1055
5 in cmd_execute ../lib/command.c:1219
6 in vtysh_execute_func ../vtysh/vtysh.c:486
7 in vtysh_execute ../vtysh/vtysh.c:671
8 in main ../vtysh/vtysh_main.c:721
9 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
10 in _start (/usr/bin/vtysh+0x21f64d)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
