- Often millisecond precision is not good enough to differentiate things that
occur directly one after another, and things that have some pause in between,
increase to microsecond precision (reporting)
Signed-off-by: Christian Hopps <chopps@labn.net>
Verify activation and desactivation of per-vrf and per-af
sid export. Modify the configuration of r2 and verify that
changes are reflected in r1 and on connectivity between ce1 and c2.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
The `bgp_srv6l3vpn_to_bgp_vrf3` topotest tests the SRv6 L3VPN
functionality. It applies the appropriate configuration in `bgpd` and
`zebra`, and then checks that the RIB is updated correctly.
The topotest expects to find the AS-Path in the RIB, which is only
present if the `bgp send-extra-data zebra` option is enabled in the
`bgpd` configuration.
The `bgp send-extra-data zebra` option has been accidentally commented
out in commit 2007e2dbd0.
This commit fixes the `bgp_srv6l3vpn_to_bgp_vrf3` topotest by re-adding
the missing `bgp send-extra-data zebra` option.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
If r1 becomes the "server" (= local port 179), then it initiates the connection
after sending BGP Notification (BFD Down) and r2 resets the last error code.
Telling r1 do not connect to r2, fixes the issue.
Tested with `pytest -s -n 48` at least 20 times - no failures.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
the ospf_basic_functionality/test_ospf_lan.py script is setting
up a lan env that will have 4 ospf routers on it and shutting/no
shutting interfaces with various priorities to see that ospf
is properly choosing roles. I am consistently seeing the
ospf_basic_functionality/test_ospf_lan.py script failing
where it is saying a neighbor is not in the correct state.
Upon examination of the logs we are seeing this:
2023/04/24 09:16:42 OSPF: [M7Q4P-46WDR] vty[7]@(config)# interface r0-s1-eth0 <----- This is where we no shut the interface
2023/04/24 09:16:47 OSPF: [M7Q4P-46WDR] vty[7]@> enable
2023/04/24 09:16:47 OSPF: [M7Q4P-46WDR] vty[7]@# show ip ospf neighbor all json
2023/04/24 09:16:53 OSPF: [QH9AB-Y4XMZ][EC 100663314] STARVATION: task ospf_ism_event (556af08a5b4c) ran for 6038ms (cpu time 0ms)
2023/04/24 09:16:53 OSPF: [HKQ2F-8D0MY][EC 100663315] Thread Starvation: {(thread *)0x556af19da020 arg=0x556af19c0dd0 timer r=-5.086 ospf_ase_calculate_timer() &ospf->t_ase_calc from ospfd/ospf_ase.c:635} was scheduled to pop greater than 4s ago
2023/04/24 09:16:53 OSPF: [M7Q4P-46WDR] vty[18]@> enable
2023/04/24 09:16:53 OSPF: [M7Q4P-46WDR] vty[18]@# show ip ospf neighbor all
2023/04/24 09:16:55 OSPF: [M7Q4P-46WDR] vty[7]@> enable
2023/04/24 09:16:55 OSPF: [M7Q4P-46WDR] vty[7]@# show ip ospf neighbor all json
2023/04/24 09:16:55 OSPF: [M7Q4P-46WDR] vty[7]@> enable
This test is setting the dead interval to 4 seconds, seeing a 6 second delay where the os has gone to town
(probably because of the high load on the system ) and not choosing the correct neighbor as the DR.
OSPF when coming up and after seeing the first neighbor, goes into a waiting period before
the DR is elected. If the neighbor does send it's hello packets but they are not processed
before the wait timer pops because of the starvation event, then the wrong neighbor
will be elected DR. Let's give this test a bit more time to decide who the
DR is in case everything goes a bit south.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fixes bad fixed path use and rootcmd functionality to run things
in the root namespace (all but pid at least).
Signed-off-by: Christian Hopps <chopps@labn.net>
After the munet switch we weren't passing the logger on to low-level
LinuxNamespace and thus Commander parent classes, so the lowest-level
`cmd_status` logs were missing from more specific log files in the run
directory.
Signed-off-by: Christian Hopps <chopps@labn.net>
- Remove the .pid and .vty files and then wait for them to show back up.
- Fix broken BGP GR test to not fail now that it's bug is exposed. It
only worked b/c when starting a daemon the pid file still existed and
blocked the bogus second BGP launch from happening.
Signed-off-by: Christian Hopps <chopps@labn.net>
Rather than create a new global dict and copy all the config into it, just
expose the pytest config globally and use it directly.
Signed-off-by: Christian Hopps <chopps@labn.net>
The typesafe hash _member() didn't check tabshift/count before
proceeding to look at the hash table, leading it to dereference a NULL
pointer when the hash table is in fact empty.
Test case added to tests/lib/test_typelist.
Note this function is not currently used anywhere. Only lib/cspf.c uses
_member(), but it does so on a RB-tree rather than a hash.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add new RIP topology to test the BFD integration and RIP ECMP:
shutdown a link and expect the RIP route change immediately instead of
regular RIP timer.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add a topotest with 9 flex-algo routers to check each router's MPLS
table.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add a topotest to check some Flex-Algo configuration changes.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Append an optional parameter to "show isis route [prefix-sid]" that
formats the output as a JSON array.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Deal with the packing and unpacking of following Flex-Algo
Sub-Sub-TLVs:
- Router Capability (already defined TLV 242)
- List of the Flex-Algo Definitions (Sub-TLV 26)
- Exclude admin group (Sub-Sub-TLV 1)
- Include-any admin group (Sub-Sub-TLV 2)
- Include-all admin group (Sub-Sub-TLV 3)
- Flags (for prefix-metric) (Sub-Sub-TLV 4)
This commit splits data into multiple router capability TLVs if needed
because a TLV cannot contains more than 255 bytes.
Note that the list of SR Algorithm (Sub-TLV 19) within Router Capability
(TLV 242) is already set in a previous commit.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
isis_tlvs_add_extended_ip_reach adds IS-IS Extended
IP reachability to the LSP. In this case, if the
pcfg argument is not NULL, you can add IGP
Prefix-SID as its sub tlv.
Before this commit, only one Prefix-SID can be added.
After this commit, the argument is not a single
pointer but an array of pointers, and multiple
Prefix-SIDs can be added.
This feature is necessary because Flex-Algo
requires multiple Prefix-SIDs for each Algorithm.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The spftree has a new property called algorithm
which is id used to identify the algorithm that
separates it in the same IGP network. This is
used in Flex-Algo. In other cases than Flex-Algo,
the algorithm id is always zero.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Rather than requesting the data for the entire model, just request the route
data for the specific prefix. This also tests the xpath code (which was
previously broken).
Signed-off-by: Christian Hopps <chopps@labn.net>
When launching the daemons under gdb it takes a bit for them to come up, the
currently code only looks for pid files to determine if the daemon is running.
This test is no good as these files are left around by previous runs.
For now do a simple sleep when debugging with gdb to get things working.
Signed-off-by: Christian Hopps <chopps@labn.net>
The tests are killing bgpd and then ending, the next test is checking for all
daemons running and spewing warnings to stderr. Restart the daemons before
ending the test (like other tests in this same module) to avoid this.
Signed-off-by: Christian Hopps <chopps@labn.net>
The label value for the given prefix was ignored,
as the compare function always returns ok.
Do return the json compare output.
Fixes: eee086e6d2 ("topotests: add topotest to check bgp lu explicit-null service")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
1. Added interface name, group address and detail option to existing
"show ip igmp groups" so that user can retrieve all the groups
or a particular group for an interface. Detail option shows the source
information for the group. With that, the show command
looks like:
"show ip igmp [vrf NAME$vrf_name] groups [INTERFACE$ifname [GROUP$grp_str]] [detail$detail] [json$json]"
2. Changed pim_cmd_lookup_vrf() to return empty JSON if VRF is not present
3. Changed "detail" option to print non pretty JSON
4. Added interface name and group address to existing
"show ip igmp sources" so that user can retrieve all the sources for
all the groups or, all the sorces for a particular group for an
interface. With that, the show command looks like:
"show ip igmp [vrf NAME$vrf_name] sourcess [INTERFACE$ifname [GROUP$grp_str]] [json$json]"
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
The scale_up.py script used by several tests installs 50k routes into the rib from
sharpd. It is first looking for the results in the bgp database. Let's ensure
that the routes are actually installed into the rib first before looking in
the bgp tables. This should help situations where the system is under extreme
load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test ensures that the incoming prefixes are received with
the appropriate label value, and that connectivity is ensured
between prefixes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Locally, the bgp_evpn_vxlan_svd_topo1 and bgp_evpn_vxlan_topo1
tests are failing for me. Upon inspection the test is looking
for the mac addresses of the interfaces participating in the
evpn bridging on the hosts. For some reason on my machine
these mac addresses are not in the l2 tables at all on
PE1 or PE2. Adding quick pings solves the problems.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Following replacement of Edge Key type (uint64_t by new structure), this patch
updates the various TE topotests to the new Edge Key references.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
For multicast pimv6 join and traffic, socat is
used, which was not cleaned up post tests executions,
enhanced kill_socat() API to kill socat join and
traffic specific PIDs during teardown module.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Enhanced or added new libraries to support
multicast mld local join automation
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Auther: Vijay Kumar Gupta <vijayg@vmware.com>
Added new test suite to verify functionality
of multicast MLD local join. Added 4 different
test cases in test suite.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Authored-by: Vijay Kumar Gupta <vijayg@vmware.com>
At this point OSPF NSSA deserves a dedicated topotest given the
latest nerd knobs that were added :)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variation of the "area nssa" command into a single
DEFPY to improve code maintainability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prior to this the full retry cycle was run with a "passing" negative
result each time through
Previous runtime ~5 minutes
New runtime ~20 seconds.
Signed-off-by: Christian Hopps <chopps@labn.net>
Test failed time to time, let's try this way:
```
$ for x in $(seq 1 20); do cp test_bgp_labeled_unicast_addpath.py test_$x.py; done
$ sudo pytest -s -n 20
```
Ran 10 times using this pattern, no failure 🤷
Before this change, we checked advertised routes, and at some point `=` was
missing from the output, but advertised correctly. Receiving router gets as
much routes as expected to receive.
I reversed checking received routes, not advertised.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If we set `bgp route-map delay-timer X`, we should ignore starting to announce
routes immediately, and wait for delay timer to expire (or ignore at all if set
to zero).
f1aa49293a broke this because we always sent
route refresh and on receiving BoRR before sending back EoRR.
Let's get fix this.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The flag for telling BGP that a route is expected to be installed
first before notifying a peer was always being set upon receipt
of a path that could be accepted as bestpath. This is not correct:
imagine that you have a peer sending you a route and you have a
network statement that covers the same route. Irrelevant if the
network statement would win the flag on the dest was being set
in bgp_update. Thus you could get into a situation where
the network statement path wins but since the flag is set on
the node, it will never be announced to a peer.
Let's just move the setting of the flag into bgp_zebra_announce
and _withdraw. In _announce set the flag to TRUE when suppress-fib
is enabled. In _withdraw just always unset the flag as that a withdrawal
does not need to wait for rib removal before announcing. This will
cover the case when a network statement is added after the route has
been learned from a peer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test demonstrates that a label is allocated for each
ipv6 next-hop. IPv6 test introduces link local ipv6 addresses
as next hops, and compared to IPv4, one can have two different
next-hops depending if the next-hop is defined by a global
address (static route redistributed) or a bgp peer.
This test checks that:
- The labels are correctly allocated per connected next-hop.
- The default label is used for non connected prefixes.
- The withdraw operation frees the MPLS entry.
- If a recursive route is redistributed by BGP, then the nexthop
tracking will find the appropriate nexthop entry, and the
associated label will be found out.
- When a prefix moves from one peer to one another behind the
vrf, then the MPLS switching operation for return
traffic is changing the outgoing interface to use.
- When the 'label vpn export <value>' MPLS label value is changed,
then the modification is propagated to prefixes which use that value.
- Also, when unconfiguring the per-nexthop allocation mode, check
that the MPLS entries and the VPNv4 entries of r1 are changed
accordingly.
- Reversely, when re-configuring the per-nexthop allocation mode,
check that the allocation mode reuses the other label values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new test suite checks for the mpls label allocation
per nexthop mode. This test checks that:
- The labels are correctly allocated per connected
next-hop.
- The default label is used for non connected prefixes
- The withdraw operation frees the mpls entry.
- If a recursive route is redistributed by BGP, then the nexthop
tracking will find the appropriate nexthop entry, and the associated
label will be found out.
- When a prefix moves from one peer to one another behind the vrf,
then the MPLS switching operation for return traffic is changing
the outgoing interface to use.
- When the 'label vpn export <value>' MPLS label value is changed,
then the modification is propagated to prefixes which use that value.
- When unconfiguring the per-nexthop allocation mode, check
that the MPLS entries and the VPNv4 entries of r1 are changed
accordingly.
- Reversely, when re-configuring the per-nexthop allocation mode,
check that the allocation mode reuses the other label values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Automated new scenarios to multicast pim6
SM test suite. Added 10 test cases to verify
multicast PIM6-SM functionality.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Auther: Vijay Kumar Gupta <vijayg@vmware.com>
Enhanced or added new libraries to support
multicast pimv6 automation
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Auther: Vijay Kumar Gupta <vijayg@vmware.com>
Add tests that configure and disable advertise-high-metrics with wide, narrow, and transition metric styles. Also test ip route behavior.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
This test ensures that BGP VRF instance is able to import ECMP
paths, and is able to install 2 labelled routes accordingly.
The test also ensures that the imported 172.31.0.10/32 prefix
is selected and that the reason why the 172.31.0.10/32 prefix is
selected is not 'Locally configured route'. Actually, imported
routes do not figure out correctly the peer, and the reason is
falsely mentioned as local.
This test also uses IP ranges used for documentation and for
testing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Depending on ip_route and kernel, the output might include a nhid
which causes the test to fail with a strict text output check.
Change to json output to avoid the issue
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Quite a few well-known communities from IANA's list do
not receive special treatment in Cisco IOS XR, and at least one
community on Cisco IOS XR's special treatment list, internet == 0:0,
is not formally a well-known community as it is not in [IANA-WKC] (it
is taken from the Reserved range [0x00000000-0x0000FFFF]).
https://datatracker.ietf.org/doc/html/rfc8642
This is Cisco-specific command which is causing lots of questions when it
comes to debugging and/or configuring it properly, but overall, this behavior
is very odd and it's not clear how it should be treated between different
vendor implementations.
Let's deprecate it and let the operators use 0:0/0 communities as they want.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There were a few tests using "show bgp ... json detail" that did json
comparisons against a predefined json structure. This updates those
predefined json structures to match the new format of the output.
(new output moves path array under "paths" key and adds header keys)
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a iproute2 API guard to the SVD test using `bridge fdb get`.
While it SHOULD be present on most systems based on their kernel
version it may not be present due to kernel/iproute2 version mismatch
weirdness.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add first of dvni topotests. Covers just basic usage of importing
wildcard VNI and installing it via lwt encap.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add new topo tests for validating mac learning, bridging and routing
with single vxlan device configuration
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Have added topotest to verify below scenarios.
1. Verify OSPF Flood reduction functionality with ospf enabled on process level.
2. Verify OSPF Flood reduction functionality with ospf enabled on area level.
3. Verify OSPF Flood reduction functionality between different area's
Have sussessfully tested these in my local setup
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
This test ensures that the regex used to filter as paths has to
be expressed in the asnotation of the BGP instance where prefixes
are received. 2 aspaths have been forged, both for AS 65540, but
only the former is expressed in asdot. If the local BGP instance
is expressed in asdot format, then only the former ASPATH will
match properly the incoming update. Reversely, when the local BGP
instance is expressed in plain format, then only the latter ASPATH
will match properly the incoming update.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This test performs AS handling operations on BGP instances,
and does some checks by using the asdot notation. AS4B values
are used for configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Each BGP prefix may have an as-path list attached. A forged
string is stored in the BGP attribute and shows the as-path
list output.
Before this commit, the as-path list output was expressed as
a list of AS values in plain format. Now, if a given BGP instance
uses a specific asnotation, then the output is changed:
new output:
router bgp 1.1 asnotation dot
!
address-family ipv4 unicast
network 10.200.0.0/24 route-map rmap
network 10.201.0.0/24 route-map rmap
redistribute connected route-map rmap
exit-address-family
exit
!
route-map rmap permit 1
set as-path prepend 1.1 5433.55 264564564
exit
ubuntu2004# do show bgp ipv4
BGP table version is 2, local router ID is 10.0.2.15, vrf id 0
Default local pref 100, local AS 1.1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 4.4.4.4/32 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
*> 10.0.2.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
10.200.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
10.201.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
The changes include:
- the aspath structure has a new field: asnotation type
The ashash list will differentiate 2 aspaths using a different
asnotation.
- 3 new printf extensions display the as number in the wished
format: pASP, pASD, pASE for plain, dot, or dot+ format (extended).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new keyword permits changing the BGP as-notation output:
- [no] router bgp <> [vrf BLABLA] [as-notation [<dot|plain|dot+>]]
At the BGP instance creation, the output will inherit the way the
BGP instance is declared. For instance, the 'router bgp 1.1'
command will configure the output in the dot format. However, if
the client wants to choose an alternate output, he will have to
add the extra command: 'router bgp 1.1 as-notation dot+'.
Also, if the user wants to have plain format, even if the BGP
instance is declared in dot format, the keyword can also be used
for that.
The as-notation output is only taken into account at the BGP
instance creation. In the case where VPN instances are used,
a separate instance may be dynamically created. In that case,
the real as-notation format will be taken into acccount at the
first configuration.
Linking the as-notation format with the BGP instance makes sense,
as the operators want to keep consistency of what they configure.
One technical reason why to link the as-notation output with the
BGP instance creation is that the as-path segment lists stored
in the BGP updates use a string representation to handle aspath
operations (by using regexp for instance). Changing on the fly
the output needs to regenerate this string representation to the
correct format. Linking the configuration to the BGP instance
creation avoids refreshing the BGP updates. A similar mechanism
is put in place in junos too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
AS number can be defined as an unsigned long number, or
two uint16 values separated by a period (.). The possible
valus are:
- usual 32 bit values : [1;2^32 -1]
- <1.65535>.<0.65535> for dot notation
- <0.65535>.<0.65535> for dot+ notation.
The 0.0 value is forbidden when configuring BGP instances
or peer configurations.
A new ASN type is added for parsing in the vty.
The following commands use that new identifier:
- router bgp ..
- bgp confederation ..
- neighbor <> remote-as <>
- neighbor <> local-as <>
- clear ip bgp <>
- route-map / set as-path <>
An asn library is available in lib/ and provides some
services:
- convert an as string into an as number.
- parse an as path list string and extract a number.
- convert an as number into a string.
Also, the bgp tests forge an as_zero_path, and to do that,
an API to relax the possibility to have a 0 as value is
specifically called from the tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is a preliminary work to handle various ways to configure
a BGP Autonomous System. When creating a BGP instance, the
user may want to define the AS number as a dotted value,
instead of using an integer value.
To handle both cases, an as_pretty char attribute will store
the as number as it has been given to the vtysh command:
router bgp <as number>
Whenever the as integer of the BGP instance was dumped,
the as_pretty original format is used.
The json output reuses the integer value to keep backward
compatibility with old displays.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Filter out keys in JSON output with "grep -v" does not work when JSON
does not use the pretty format.
Use native python code to filter out keys.
Fixes: 6c13bd5744 ("topotests: fix bgp_vpnv4_noretain")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The test was sometimes failing around the sleep(4) for
waiting for the routes to be installed. Instead of blindly
sleeping let's check to see that the routes are actually
there in zebra and then continue on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Renamed "gates" to "nexthops"
2. Displaying afi of the nexthops being dispalyed in place of
"nexthops" JSON object in the old JSON output
3. Calling show_route_nexthop_helper() and show_nexthop_json_helper()
instead of print_nh() inorder to keeps the fields in "nexthops"
JSON object in sync with "nexthops" JSON object of
"show nexthop-group rib json".
Updated vtysh:
r1# show ip nht
192.168.0.2
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
192.168.0.4
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
Updated JSON:
r1# show ip nht json
{
"default":{
"ipv4":{
"192.168.0.2":{
"nhtConnected":false,
"clientList":[
{
"protocol":"static",
"socket":28,
"protocolFiltered":"none"
}
],
"nexthops":[
{
"flags":3,
"fib":true,
"directlyConnected":true,
"interfaceIndex":2,
"interfaceName":"r1-eth0",
"vrf":"default",
"active":true
}
],
"resolvedProtocol":"connected"
}
}
}
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
When running the build in a separate build directory, redirecting output
into a file can error out if the directory does not exist yet. Some
places already had `mkdir -p` calls, but not all.
Make all occurences of this consistently use `@$(MKDIR_P)`.
(Extension of PR #12575 to catch more places.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fix the following issues:
- two tests are done in one function. Dispatch the tests in two
functions to help the test debug.
- the first test passes even if a third prefix is not filtered. Match
the exact to avoid false positive.
- the expected values contains variable like version. Do no check
variable values.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
After implementing ACCEPT_OWN extended community, bgpd can't import VPN
routes to the VRFs whose RD is matched with that of VPN routes. This
commit adds new test to check the effect of the next commit.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Testcase: test_pim6_multiple_groups_different_RP_address_p2
was failing because of a bug in framework, Fixed the
bug in this commit.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Multicast pim6 static RP tests are failing
when run in parallel using micronet. There
are APIs to clean mcast traffic before
starting new test but these cleanups
are not needed when socat is used.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Under really heavily loaded systems this is insufficient. Looking
at the run output we have this:
"2.1.3.22\/32":[
{
"installed":true,
}
],
"2.1.3.23\/32":[
{
"queued":true,
}
],
So after 10 seconds on the micronet system only 30 of the 100 routes are installed.
Give it more time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Looks like under heavy load, the test is not giving enough
time to come to steady state. Do this:
a) send more udp packets and for longer
b) Increase time spent waiting
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
MPLS VPN networks can either peer with iBGP or eBGP. When
calculating the distance to send to zebra, the imported prefix
is never sent with distance information, even if the vty
command is used under the ipv4 unicast address family:
router bgp 65505 vrf vrf1
address-family ipv4 unicast
distance bgp 26 27 28
[vpn config]
The observation is that the distance sent to zebra for an
imported prefix is still 20:
[..]
VRF vrf1:
B> 192.168.0.0/24 [20/0] via 2.2.2.2 (vrf default) (recursive), label 20, weight 1, 00:00:12
* via 10.125.0.6, ntfp3 (vrf default), label implicit-null/20, weight 1, 00:00:12
The expectation is that the incoming prefix has to follow the
distance that is configured, or the distance derived from the peer
relationship established by the parent prefix.
In the case, an iBGP relationship is done, and no distance
configuration is done, the below show is expected:
[..]
VRF vrf1:
B*> 192.168.0.0/24 [200/0] via 192.168.0.2, r1-gre0 (vrf default), label 20, weight 1, 00:00:12
In the case an iBGP relationship is done, and distance configuration
is performed as below:
[..]
distance bgp 21 201 41
[..]
Then the below show is expected:
[..]
VRF vrf1:
B*> 192.168.0.0/24 [201/0] via 192.168.0.2, r1-gre0 (vrf default), label 20, weight 1, 00:00:12
To get this behaviour, get the peer origin where the prefix is coming
from.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
I'm seeing test failures after in micronet runs in CI
after 7 seconds * 30 attempts at seeing if it succeeds.
Let's see if another 60 seconds of attempts allows
this to work properly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Single run of this test suite on my machine was 8 minutes.
Breaking this up into 3 test suites halves the run time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This change alters the behavior of existing test code. The
default mode (before any call to luSetWaitType()) is now
"strict".
The historical behavior of luCommand(op="wait) is to ignore
failures to match the specified regexp in the specified time.
In those cases, no result was logged and no error was signaled.
This change introduces a new "strict" mode for luCommand(op="wait):
in "strict" wait mode, each invocation of luCommand(op="wait)
generates an explicit, logged failure result when it fails to match
the specified regexp in the specified time. These failures signal
an error for the test.
Calling luSetWaitType("nostrict") restores the historical behavior.
Calling luSetWaitType("strict") (re)enables the new strict behavior.
Individual calls to luCommand() may also specify op="wait-nostrict"
to override any default and use the historical behavior.
Individual calls to luCommand() may also specify op="wait-strict"
to override any default and use the new behavior.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Test that BFD static monitoring works:
When BFD session is up the routes are installed in the RIB and
distributed with routing protocol (in this case BGP). When the session
is down it is removed from RIB and propagated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Tests are failing in micronet because linux kernel needs are 4.19
not 4.15
2023-01-11 17:15:06,657.657 INFO: topolog.r1: vtysh command => "show zebra"
2023-01-11 17:15:06,657.657 DEBUG: topolog.r1: LinuxNamespace(r1): cmd_status("['/bin/bash', '-c', 'vtysh -c "show zebra" 2>/dev/null']", kwargs: {'encoding': 'utf-8', 'stdout': -1, 'stderr': -2, 'shell': False, 'stdin': None})
2023-01-11 17:15:06,729.729 INFO: topolog.r1: vtysh result:
OS Linux(4.15.0-193-generic)
Notice the missing pimreg11 device needed in vrf blue:
2023-01-11 17:15:06,731.731 DEBUG: topolog.r1: LinuxNamespace(r1): cmd_status("['/bin/bash', '-c', 'vtysh -c "show int brief" 2>/dev/null']", kwargs: {'encoding': 'utf-8', 'stdout': -1, 'stderr': -2, 'shell': False, 'stdin': None})
2023-01-11 17:15:06,781.781 INFO: topolog.r1: vtysh result:
Interface Status VRF Addresses
--------- ------ --- ---------
blue up blue 192.168.0.1/32
r1-eth0 up blue 192.168.100.1/24
r1-eth1 up blue 192.168.101.1/24
Interface Status VRF Addresses
--------- ------ --- ---------
erspan0 down default
gre0 down default
gretap0 down default
lo up default
pimreg up default
Interface Status VRF Addresses
--------- ------ --- ---------
r1-eth2 up red 192.168.100.1/24
r1-eth3 up red 192.168.101.1/24
red up red 192.168.0.1/32
While on a 5.4 machine we have this:
mininet310# show int brief
Interface Status VRF Addresses
--------- ------ --- ---------
blue up blue
dummy1 up blue
dummy2 up blue
pimreg11 up blue
As such let's limit the test to a 4.19 kernel or above that our
documentations states we need for proper pim operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Previously, routes leaked from one VRF to another VRF were associated
with the original nexthop interface.
Commit 14aabc0156 replaced the nexthop
interface with the index of incoming VRF interface.
Due to this change, the `bgp_srv6l3vpn_route_leak` topotest always fails
because it still expects the nexthop interface.
This commit fixes the expected interface name in the
`bgp_srv6l3vpn_route_leak` topotest.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
