If you have an interface being added to a static mroute
and that interface has been configured w/ pim but does
not have a valid ip address yet, we do not create a
VIF for that device yet. As such when we attempt
to assign the vif array in the pim static data structure
we attempt to write into -1 of that array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR log targets are independent, so "log syslog" must not disable
"log file" output.
Fixes: #3551
Fixes: 0204baa876
Signed-off-by: David Lamparter <equinox@diac24.net>
The sequence number used should be unique and increase by 1
for netlink commands. This will allow the code to match
up batched commands to actual requests, so that we can signal
the failure correctly back.
So start the movement and tracking of sequence numbers as
an atomic uint32_t in zebra_router. Modify the dataplane
code to start tracking contexts from this value.
In future commits we will move more of the sequencing
data into using this value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On Mac OS, where we don't have objcopy, ./configure logs:
checking for objcopy... no
checking for .interp value to use... ./configure: line 22174: conftest.interp: No such file or directory
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
./configure on Mac OS logs:
checking whether ranlib supports D option... error: /Library/Developer/CommandLineTools/usr/bin/ranlib: unknown option character `D' in: -D
Usage: /Library/Developer/CommandLineTools/usr/bin/ranlib [-sactfqLT] [-] archive [...]
no
This is quite noisy.
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
./configure logs this on Mac OS:
checking whether ar supports D option... /Library/Developer/CommandLineTools/usr/bin/ar: illegal option -- D
usage: ar -d [-TLsv] archive file ...
ar -m [-TLsv] archive file ...
ar -m [-abiTLsv] position archive file ...
ar -p [-TLsv] archive [file ...]
ar -q [-cTLsv] archive file ...
ar -r [-cuTLsv] archive file ...
ar -r [-abciuTLsv] position archive file ...
ar -t [-TLsv] archive [file ...]
ar -x [-ouTLsv] archive [file ...]
no
This is quite noisy and we're only interested in the result of the
check, not the output.
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
We were using dplane_ctx_get_status(ctx) and assigning that
value to zebra_dplane_status, not zebra_dplane_result( yeah what? )
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Waiting 10 seconds for bgp convergence makes no sense, especially
if the test system is under load and a node is started up before
the node it is connecting to is up. We should wait for the full
default of 120 seconds, plus a little time to ensure nothing is
screwed up too much.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The calculation to know when an LDP PDU went past the maximum
negotiated PDU length was wrong because it wasn't taking the
"Version" and "PDU Length" fields into account (total of four
bytes). Fix this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Finish the LSP update code for the async dataplane for
the openbsd platform. Remove synch apis now that we've
converted to the async code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Remove the last use of the pre-dataplane LSP update apis;
remove the stubs from the 'null' implementation file.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Start performing LSP updates through the async dataplane
subsystem. This is plumbed through for linux/netlink.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Adding infra to zebra dplane to support LSP updates. Add
kernel api for LSP updates that uses a dataplane context; add
stub apis for netlink, bsd, and 'null' kernel paths. Add
version of netlink mpls update code that takes a dplane
context struct instead of a zebra lsp struct.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add public versions of zebra apis that add NHLFEs to an LSP,
and that free NHLFEs. The dataplane code needs to capture/copy
NHLFEs in order to do async LSP programming.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move route info to a separate struct and use a union in the
dplane context to hold either route or lsp info. Add
accessors for LSP info.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
CC lib/frr_pthread.lo
lib/frr_pthread.c:128:40: error: too many arguments to function call, expected 1, have 3
ret = pthread_setname_np(fpt->thread, fpt->os_name, NULL);
~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~
/Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/usr/include/pthread.h:512:1: note: 'pthread_setname_np' declared here
__API_AVAILABLE(macos(10.6), ios(3.2))
Mac OS does have pthread_setname_np, but we can't use it here since it
only accepts a single argument, the thread name, and thus only works for
the current thread.
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
IPv6 uses AF_LINK to represent netmasks, this commit unbreaks
`rtm_read_mesg` that was broke on the `rta_get*` refactory.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 7a163a7c59)
IPv6 netmasks use AF_LINK family type and puts the correct amount of
set bits in the data structure. If we only copy the SDL header we
won't get all IPv6 address length, we must copy the whole extension of
the `sockaddr_in6` struct (which is provided in `destlen` parameter).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 691e903879)
Remove two unused functions in `zebra/rt_socket.c`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit 914fea09d9)
`sockaddr` `len` field is the address type size and not the mask length.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit a6c0003182)
when removing bgp instance, the parsing of rm->info contexts must be
protected. Also, the main level of hierarchy of rds must not be
allocated more than once.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is mostly to be consistent with the "show ip import-check"
command, which is very similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Favor usage of the afi_t enumeration to identify address-families
over using the classic AF_INET[6] constants for that. The choice to
use either of the two seems to be mostly arbitrary throughout our
code base, which leads to confusion and bugs like the one fixed by
commit 6f95d11a1. To address this problem, favor usage of the afi_t
enumeration whenever possible, since 1) it's an enumeration (helps
the compilers to catch some bugs), 2) has a safi_t sibling and 3)
can be used to index static arrays. AF_INET[6] should then be used
only when interfacing with the kernel or external libraries like
libc. The family2afi() and afi2family() functions can be used to
convert between the two different representations back and forth.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In the CLI code, each cmd_token has both a "text" field, containing
the full token text (e.g. "unicast"), and an "arg" field,
containing the original text entered by the user (which might be
an abbreviation, like "uni" instead of "unicast").
To avoid the need to handle abbreviations, the recommended pattern
for DEFUN commands is to use the "text" value of fixed parameters
and the "arg" value of everything else.
Using DEFPY, however, the CLI parameters are automagically turned
into C variables which are initialized under the hood (so that
they're conveniently ready for use). The problem is that this
initialization was always using the "arg" value of the parameters,
which was leading to problems like these:
debian# show ipv6 route isi
Unknown route type
debian#
debian# conf t
debian(config)# router isis 1
debian(config-router)# redistribute ipv4 st level-1
% Configuration failed.
Invalid value "st" in "protocol" element.
YANG path: /frr-isisd:isis/instance[area-tag='1']/redistribute/ipv4[protocol='st']/protocol
To fix these problems (and probably others too), make DEFPY commands
auto-detect the type of the input parameters and use either the
"arg" or "text" value from the cmd_tokens accordingly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
