zfsctl_root_readdir(): properly set eof.
readdir(): set *eofp to 1 on eof.
If there were no dirents to copy out, return EINVAL same as UFS.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Konstantin Belousov <kib@FreeBSD.org>
Closes#17655
When requested to dump metaslabs only for specific vdev, apply the
filter also to log spacemaps to reduce the output. Unfortunately
filtering by metaslab numbers is more difficult so leave those.
While there, tune the output formatting.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17643
Only used for a couple of debug assertions which had very little value.
Setting it required taking certain locks, so we can remove all that too.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Old debug param, not used for anything.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
dn_dirty_txg only existed for DNODE_IS_DIRTY(). In turn, that only
existed to ensure that a dnode was clean before making it eligible for
removal from the array of cached dnodes attached to the object 0 L0
dbuf.
dn_dirtycnt is enough to check that now, so use it directly and remove
the rest.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Bumped when we take the dirty hold in dnode_setdirty(), dropped when the
dnode is finally cleaned up after sync in dnode_rele_task() or
userquota_updates_task().
This gives us a way to check if the dnode is dirty on any txg without
having to rely on outside information (eg presence on a dirty list),
which has been a rich source of bugs in the past.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Suggested-by: Robert Evans <evansr@google.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
This commit adds Debian 13 alias Trixie to the checked operating
systems. The image needs to be run with UEFI support.
Current Debian version overview:
- Debian 11 (Bullseye) -> "oldoldstable"
- Debian 12 (Bookworm) -> "oldstable"
- Debian 13 (Trixie) -> new "stable"
The CI will be run on Debian 12 and Debian 13 now.
Debian 11 is kept, but won't be used automatically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17648
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17633Closes#17646
6cf17f65 (#17456) introduced a change to `configure.ac` which
breaks the patching done in the Debian packages DKMS source
installation phase. This results in a failed module build.
Adapt the awk script doing the patching to handle the added
`AC_CONFIG_FILE` entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17633Closes#17646
All of zpool_find_config() callers now set lpc_printerr. Actually
printing the errors when pool can not be found should make zdb a
half percent less confusing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17642
Since both ZFS- and OS-sides of a zvol now take care of their own
locking and don't get in each other's way, there's no need for the very
complicated removal code to fall back to async tasks if the locks needed
at each stage can't be obtained right now.
Here we change it to be a linear three-step process: select zvols of
interest and flag them for removal, then wait for them to shed activity
and then remove them, and finally, free them.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
zvol_state_lock is intended to protect access to the global name->zvol
lists (zvol_find_by_name()), but has also been used to control access to
OS-side private data, accessed through whatever kernel object is used to
represent the volume (gendisk, geom, etc).
This appears to have been necessary to some degree because the OS-side
object is what's used to get a handle on zvol_state_t, so zv_state_lock
and zv_suspend_lock can't be used to manage access, but also, with the
private object and the zvol_state_t being shutdown and destroyed at the
same time in zvol_os_free(), we must ensure that the private object
pointer only ever corresponds to a real zvol_state_t, not one in partial
destruction. Taking the global lock seems like a convenient way to
ensure this.
The problem with this is that zvol_state_lock does not actually protect
access to the zvol_state_t internals, so we need to take zv_state_lock
and/or zv_suspend_lock. If those are contended, this can then cause
OS-side operations (eg zvol_open()) to sleep to wait for them while hold
zvol_state_lock. This then blocks out all other OS-side operations which
want to get the private data, and any ZFS-side control operations that
would take the write half of the lock. It's even worse if ZFS-side
operations induce OS-side calls back into the zvol (eg creating a zvol
triggers a partition probe inside the kernel, and also a userspace
access from udev to set up device links). And it gets even works again
if anything decides to defer those ops to a task and wait on them, which
zvol_remove_minors_impl() will do under high load.
However, since the previous commit, we have a guarantee that the private
data pointer will always be NULL'd out in zvol_os_remove_minor()
_before_ the zvol_state_t is made invalid, but it won't happen until all
users are ejected. So, if we make access to the private object pointer
atomic, we remove the need to take a global lockout to access it, and so
we can remove all acquisitions of zvol_state_lock from the OS side.
While here, I've rewritten much of the locking theory comment at the top
of zvol.c. It wasn't wrong, but it hadn't been followed exactly, so I've
tried to describe the purpose of each lock in a little more detail, and
in particular describe where it should and shouldn't be used.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
When destroying a zvol, it is not "unpublished" from the system (that
is, /dev/zd* node removed) until zvol_os_free(). Under Linux, at the
time del_gendisk() and put_disk() are called, the device node may still
be have an active hold, from a userspace program or something inside the
kernel (a partition probe). As it is currently, this can lead to calls
to zvol_open() or zvol_release() while the zvol_state_t is partially or
fully freed. zvol_open() has some protection against this by checking
that private_data is NULL, but zvol_release does not.
This implements a better ordering for all of this by adding a new
OS-side method, zvol_os_remove_minor(), which is responsible for fully
decoupling the "private" (OS-side) objects from the zvol_state_t. For
Linux, that means calling put_disk(), nulling private_data, and freeing
zv_zso.
This takes the place of zvol_os_clear_private(), which was a nod in that
direction but did not do enough, and did not do it early enough.
Equivalent changes are made on the FreeBSD side to follow the API
change.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
zvol_remove_minor_impl() and zvol_remove_minors_impl() should be
identical except for how they select zvols to remove, so lets just use
the same function with a flag to indicate if we should include children
and snapshots or not.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
Rename `zcw_zio_error` to `zcw_error` in `trace_zil.h` that was missed
in commit f562e0f69. This fixes compilation errors exposed when building
with `--with-linux=`.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17654
Output the result of the "iops->mkdir() returns struct dentry*"
check to cleanup the configure output.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17641
In the past there have been times when we need to generate new RPMs
for an existing ZFS release. Typically this happens when a new RHEL
version comes out and the kernel symbols no longer match. To get
users to auto-update we just bump the patch number. For example, we
had to create zfs-2.1.13-1 for EL8.8 and zfs-2.1.13-2 for EL8.9.
This commit adds an optional patch level text box to the github
package builder runner.
In addition, this commit also uses `hostnamectl` instead of `hostname`
for F42+ compatibility, if available.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17638
Back in 2014 the zfs_autoimport_disable module option was added to
control whether the kmods should load the pool configs from the cache
file on module load. The default value since that time has been for
the kernel to not process the cache file.
Detecting and importing pools during boot is now controlled outside
of the kmod on both Linux and FreeBSD. By all accounts this has been
working well and we can remove this dormant code on the kernel side.
The spa_config_load() function is has been moved to userspace, it is
now only used by libzpool. Additionally, the spa_boot_init() hook
which was used by FreeBSD now looks to be used and was removed.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17618
When ZIL allocates space for new LWBs without knowing how much it
will require, it can use new metaslab_alloc_range() function to
allocate slightly more or less than it predicted. It allows to
improve space efficiency by allocating bigger LWBs on RAIDZ/dRAID
instead of padding and possibly packing more ZIL records there.
It may also allow to reduce ganging in some cases by allowing to
allocate smaller LWBs when we are not sure we'll need bigger.
On the opposite side, when we allocate space for already closed
LWBs, when we precisely know how much space we need, we may just
allocate what we need instead of relying on writing less than
allocated, that does not work for RAIDZ.
Space for LWBs in open state (still being filled) is allocated
same as before.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17613
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Joel Low <joel@joelsplace.sg>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17058
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Joel Low <joel@joelsplace.sg>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17058
This uses the AVX2 versions of the AESENC and PCLMULQDQ instructions; on
Zen 3 this provides an up to 80% performance improvement.
Original source:
d5440dd2c2/gen/bcm/aes-gcm-avx2-x86_64-linux.S
See the original BoringSSL commit at
3b6e1be439.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Joel Low <joel@joelsplace.sg>
Closes#17058
Physical rewrite patch changed the meaning of BP_GET_BIRTH(), but
I missed update one of its occurences, ending up asserting equal
logical birth times instead of equal physical birth times.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Fixes#17565Closes#17631
In e8f0aa143e, the SONAMEs and package
names for libzfs and libzpool were bumped. The `contrib/debian/control`
file did not declare a conflict/replacement with the old package name.
This can cause dpkg to leave a system in an inconsistent state if the
old package is not manually uninstalled first.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Patrick Fasano <patrick@patrickfasano.com>
Closes#17586
Usage zap's (DMU_*USED_OBJECT) are updated in syncing context via
do_userquota_cacheflush(). zap shrink triggers,
ASSERT(db->db_objset == dmu_objset_pool(db->db_objset)->dp_meta_objset
|| txg != spa_syncing_txg(dmu_objset_spa(db->db_objset)));
DMU_*USED_OBJECT are special object (DMU_OBJECT_IS_SPECIAL), gets
updated in syncing context only. So, relax assert for it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#17602
When dumping indirect blocks, attempt to print corrupt block pointers
rather than abort the program. When corruption is detected zdb will
exit with an error code of 3.
Sponsored by: ConnectWise
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Alek Pinchuk <alek.pinchuk@connectwise.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17166
I got a newer shellcheck, and it pointed out that read without a target
variable is not POSIXly. The var was removed in c3ef9f7528, so I put it
back, and now shellcheck complains about an unused var. That's actually
correct, but necessary, so I've added a suppression for that, probably
better.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17626
Chase URL change from the FreeBSD project.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Closes#17617
Allow zstd_mempool_init() to allocate using vmem_alloc() instead
of kmem_alloc() to silence the large allocation warning on Linux
during module load when the system has a large number of CPUs.
It's not at all clear to me that scaling the allocation size with
the number of CPUs is beneficial and that should be evaluated.
But for the moment this should resolve the warning without
introducing any unexpected side effects.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17620Closes#11557
Systems with a large number of CPU cores (192+) may trigger the large
allocation warning in multilist_create() on Linux. Silence the warning
by converting the allocation to vmem_alloc().
On Linux this results in a call to kvalloc() which will alloc vmem
for large allocations and kmem for small allocations.
On FreeBSD both vmem_alloc and kmem_alloc internally use the same
allocator so there is no functional change.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17616
By using precisely sized fields it is possible to reduce the size
of this structure and respectively struct zio it is included into
by 40 bytes (from 92 to 52).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17619
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
Make sure we properly inform the nolwb waiters of the error, and don't
keep trying.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
Just making it easier to not get the locking and broadcast wrong.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
If the ZIL crashed, any outstanding LWBs are no longer interesting, so
if they return, we need to just clean them up and return, not try to do
any work on them. This is true even if they return success, as that may
be long after the pool suspended and resumed, depending on when/if the
kernel decides to return the IO to us. In particular, we must not try to
get the "next" LWB from zl_lwb_list, since they're no longer on that
list.
So, we put a flag on in-flight LWBs in zil_crash() when we move them
from zl_lwb_list to zl_lwb_crash_list, so we know what's going on when
they return.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
I'm soon about to need another LWB flag, and boolean_t is just so big
for only storing a single bit. Changing to a bitfield is far less
wasteful.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
Update the META file to reflect compatibility with the 6.16
kernel.
Tested with 6.16.0-0-stable of Alpine Linux edge, see
<https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/87929>.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Achill Gilgenast <achill@achill.org>
Closes#17578
This converts the body of a ZED slack notification from
plain text to code block style to help with readability.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: René Wirnata <rene.wirnata@pandascience.net>
Closes#17610
This is trying to get all the uses and non-uses of SET_ERROR correct
(being: only call it if we're the originator of an error _within ZFS_),
and correctly negating errors going to/from the kernel. And/or both.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17605
Since zil_commit_flags(NOW) will always return error if the pool is
suspended, there's no need for a separate suspend check here.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Page writeback is considered completed when the associated itx callback
completes. A syncing writeback will receive the error in its callback
directly, but an in-flight async writeback that was promoted to sync by
the ZIL may also receive an error.
Writeback errors, even syncing writeback errors, are not especially
serious on their own, because the error will ultimately be returned to
the zil_commit() caller, either zfs_fsync() for an explicit sync op (eg
msync()) or to zfs_putpage() itself for a syncing (VM_PAGER_PUT_SYNC)
writeback.
The only thing we need to do when a page writeback fails is to skip
marking the page clean ("undirty"), since we don't know if it made it to
disk yet. This will ensure that it gets written out again in the future,
either some scheduled async writeback or another explicit syncing call.
On the other side, we need to make sure that if a syncing op arrives,
any changes on dirty pages are written back to the DMU and/or the ZIL
first. We do this by starting an async writeback on the vnode cache
first, so any dirty data has been recorded in the ZIL, ready for the
followup zfs_sync()->zil_commit() to find.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Page writeback is considered completed when the associated itx callback
completes. A syncing writeback will receive the error in its callback
directly, but an in-flight async writeback that was promoted to sync by
the ZIL may also receive an error.
Writeback errors, even syncing writeback errors, are not especially
serious on their own, because the error will ultimately be returned to
the zil_commit() caller, either zfs_fsync() for an explicit sync op (eg
msync()) or to zfs_putpage() itself for a syncing (WB_SYNC_ALL) writeback
(kernel housekeeping or sync_file_range(SYNC_FILE_RANGE_WAIT_AFTER).
The only thing we need to do when a page writeback fails is to re-mark
the page dirty, since we don't know if it made it to disk yet. This will
ensure that it gets written out again in the future, either some
scheduled async writeback or another explicit syncing call.
On the other side, we need to make sure that if a syncing op arrives,
any changes on dirty pages are written back to the DMU and/or the ZIL
first. We do this by starting an _async_ (WB_SYNC_NONE) writeback on the
file mapping at the start of the sync op (fsync(), msync(), etc). An
async op will get an async itx created and logged, ready for the
followup zfs_fsync()->zil_commit() to find, while avoiding a zil_commit()
call for every page in the range.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
The vast majority of calls to zil_commit() follow VFS ops, and should
honour the failmode= setting - either wait for sync, or return error.
Some calls however are part of a larger syncing op, and shouldn't ever
block if something goes wrong.
To allow this, we introduce zil_commit_flags(), with a flag
ZIL_COMMIT_FAILMODE to indicate whether or not the pool failmode should
be honoured. zil_commit() is now a wrapper that always sets this flag,
but any caller wanting a different behaviour can request ZIL_COMMIT_NOW
instead to have the call return failure if the pool suspends, regardless
of the failmode= setting.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
If the ZIL runs into trouble, it calls txg_wait_synced(), which blocks
on suspend. We want it to not block on suspend, instead returning an
error. On the surface, this is simple: change all calls to
txg_wait_synced_flags(TXG_WAIT_SUSPEND), and then thread the error
return back to the zil_commit() caller.
Handling suspension means returning an error to all commit waiters. This
is relatively straightforward, as zil_commit_waiter_t already has
zcw_zio_error to hold the write IO error, which signals a fallback to
txg_wait_synced_flags(TXG_WAIT_SUSPEND), which will fail, and so the
waiter can now return an error from zil_commit().
However, commit waiters are normally signalled when their associated
write (LWB) completes. If the pool has suspended, those IOs may not
return for some time, or maybe not at all. We still want to signal those
waiters so they can return from zil_commit(). We have a list of those
in-flight LWBs on zl_lwb_list, so we can run through those, detach them
and signal them. The LWB itself is still in-flight, but no longer has
attached waiters, so when it returns there will be nothing to do.
(As an aside, ITXs can also supply completion callbacks, which are
called when they are destroyed. These are directly connected to LWBs
though, so are passed the error code and destroyed there too).
At this point, all ZIL waiters have been ejected, so we only have to
consider the internal state. We potentially still have ITXs that have
not been committed, LWBs still open, and LWBs in-flight. The on-disk ZIL
is in an unknown state; some writes may have been written but not
returned to us. We really can't rely on any of it; the best thing to do
is abandon it entirely and start over when the pool returns to service.
But, since we may have IO out that won't return until the pool resumes,
we need something for it to return to.
The simplest solution I could find, implemented here, is to "crash" the
ZIL: accept no new ITXs, make no further updates, and let it empty out
on its normal schedule, that is, as txgs complete and zil_sync() and
zil_clean() are called. We set a "restart txg" to three txgs in the
future (syncing + TXG_CONCURRENT_STATES), at which point all the
internal state will have been cleared out, and the ZIL can resume
operation (handled at the top of zil_clean()).
This commit adds zil_crash(), which handles all of the above:
- sets the restart txg
- capture and signal all waiters
- zero the header
zil_crash() is called when txg_wait_synced_flags(TXG_WAIT_SUSPEND)
returns because the pool suspended (ESHUTDOWN).
The rest of the commit is just threading the errors through, and related
housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
