In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250810214144.1985-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Yao Zi says:
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
v2: https://lore.kernel.org/netdev/20250801091240.46114-1-ziyao@disroot.org/
v1: https://lore.kernel.org/all/20250729093734.40132-1-ziyao@disroot.org/
====================
Link: https://patch.msgid.link/20250808093655.48074-2-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Describe perisys-apb4-hclk as the APB clock for TH1520 SoC, which is
essential for accessing GMAC glue registers.
Fixes: 7e756671a6 ("riscv: dts: thead: Add TH1520 ethernet nodes")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-5-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3a ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Besides ones for GMAC core and peripheral registers, the TH1520 GMAC
requires one more clock for configuring APB glue registers. Describe
it in the binding.
Fixes: f920ce04c3 ("dt-bindings: net: Add T-HEAD dwmac support")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-3-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cd ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Fixes: 1b76b2497a ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877 ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
(cherry picked from commit 46fb38cb20c0d185a6391ab524b23e0e0219c41f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
As per the wa_18038517565, we need to disable FBC compressor
clock gating before enabling FBC and enable after disabling
FBC. Placing the enabling of clock gating in the fbc deactivate
function can make the above wa logic go wrong in case of
frontbuffer rendering FBC mechanism. FBC deactivate can get
called during fb invalidate and then the corresponding FBC
activate can get called without properly disabling the clock
gating and can result in compression stalled. So move the
enable clock gating at the end of one FBC session after FBC
is completely disabled for a pipe.
Bspec: 74212, 72197, 69741, 65555
Fixes: 010363c461 ("drm/i915/display: implement wa_18038517565")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250729124648.288497-1-vinod.govindapillai@intel.com
(cherry picked from commit 82dde0407ab126f8413fd6c51429e5057ced5ba2)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Otherwise it would display the virtual allocation size, which is often
much bigger than the RSS.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: e48ade5e23 ("drm/panfrost: show device-wide list of DRM GEM objects over DebugFS")
Tested-by: Christopher Healy <healych@amazon.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250808010235.2831853-1-adrian.larumbe@collabora.com
The commit 65c6604725 ("proc: fix the issue of proc_mem_open returning
NULL") caused proc_maps_open() to return -ESRCH when proc_mem_open()
returns NULL. This breaks legitimate /proc/<pid>/maps access for kernel
threads since kernel threads have NULL mm_struct.
The regression causes perf to fail and exit when profiling a kernel
thread:
# perf record -v -g -p $(pgrep kswapd0)
...
couldn't open /proc/65/task/65/maps
This patch partially reverts the commit to fix it.
Link: https://lkml.kernel.org/r/20250807165455.73656-1-wjl.linux@gmail.com
Fixes: 65c6604725 ("proc: fix the issue of proc_mem_open returning NULL")
Signed-off-by: Jialin Wang <wjl.linux@gmail.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It was discovered in the attached report that commit f822a9a81a ("mm:
optimize mremap() by PTE batching") introduced a significant performance
regression on a number of metrics on x86-64, most notably
stress-ng.bigheap.realloc_calls_per_sec - indicating a 37.3% regression in
number of mremap() calls per second.
I was able to reproduce this locally on an intel x86-64 raptor lake
system, noting an average of 143,857 realloc calls/sec (with a stddev of
4,531 or 3.1%) prior to this patch being applied, and 81,503 afterwards
(stddev of 2,131 or 2.6%) - a 43.3% regression.
During testing I was able to determine that there was no meaningful
difference in efforts to optimise the folio_pte_batch() operation, nor
checking folio_test_large().
This is within expectation, as a regression this large is likely to
indicate we are accessing memory that is not yet in a cache line (and
perhaps may even cause a main memory fetch).
The expectation by those discussing this from the start was that
vm_normal_folio() (invoked by mremap_folio_pte_batch()) would likely be
the culprit due to having to retrieve memory from the vmemmap (which
mremap() page table moves does not otherwise do, meaning this is
inevitably cold memory).
I was able to definitively determine that this theory is indeed correct
and the cause of the issue.
The solution is to restore part of an approach previously discarded on
review, that is to invoke pte_batch_hint() which explicitly determines,
through reference to the PTE alone (thus no vmemmap lookup), what the PTE
batch size may be.
On platforms other than arm64 this is currently hardcoded to return 1, so
this naturally resolves the issue for x86-64, and for arm64 introduces
little to no overhead as the pte cache line will be hot.
With this patch applied, we move from 81,503 realloc calls/sec to 138,701
(stddev of 496.1 or 0.4%), which is a -3.6% regression, however accounting
for the variance in the original result, this is broadly restoring
performance to its prior state.
Link: https://lkml.kernel.org/r/20250807185819.199865-1-lorenzo.stoakes@oracle.com
Fixes: f822a9a81a ("mm: optimize mremap() by PTE batching")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071609.4e743d7c-lkp@intel.com
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit_anon_folio_batch(), we iterate over all pages pointed to by the
PTE batch. Therefore we need to know the first page of the batch;
currently we derive that via folio_page(folio, 0), but, that takes us to
the first (head) page of the folio instead - our PTE batch may lie in the
middle of the folio, leading to incorrectness.
Bite the bullet and throw away the micro-optimization of reusing the folio
in favour of code simplicity. Derive the page and the folio in
change_pte_range, and pass the page too to commit_anon_folio_batch to fix
the aforementioned issue.
Link: https://lkml.kernel.org/r/20250806145611.3962-1-dev.jain@arm.com
Fixes: cac1db8c3a ("mm: optimize mprotect() by PTE batching")
Reported-by: syzbot+57bcc752f0df8bb1365c@syzkaller.appspotmail.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Debugged-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Link: https://lkml.kernel.org/r/20250804225633.841777-1-hsukrut3@gmail.com
Fixes: aadc099c48 ("selftests/proc: add verbose mode for /proc/pid/maps tearing tests")
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hunter <david.hunter.linux@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since 'snprintf()' returns the number of characters emitted, an
output position may be advanced with this return value rather
than using an explicit calls to 'strlen()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables
them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe()
fail, we leave the clocks prepared and enabled. Fix this by using
devm_clk_bulk_get_all_enabled() to combine the steps and provide devm
based release of the prepare and enable state.
This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't
correctly retrieving the struct plat_stmmacenet_data. This becomes
unnecessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: a045e40645 ("net: stmmac: refactor clock management in EQoS driver")
Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which
doesn't take part in the devm release. Therefore, when a device is
unbound, this clock needs to be explicitly put. Fix this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: fecd4d7eef ("net: stmmac: dwmac-rk: Add integrated PHY support")
Link: https://patch.msgid.link/E1ukM1S-0086qo-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f536 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir")
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reviewer's email no longer works. Remove it from MAINTAINERS.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://patch.msgid.link/20250808173925.FECE3782@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This maintainer's email no longer works. Remove it from MAINTAINERS.
Also mark the code as an Orphan.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20250808175324.8C4B7354@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This maintainer's email no longer works. Remove it from MAINTAINERS.
I've been unable to locate a new maintainer for this at Intel. Mark
the driver as Orphaned.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20250808174505.C9FF434F@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In drm_dev_put() call in AlwaysRefCounted::dec_ref() we rely on struct
drm_device to be the first field in drm::Device, whereas everywhere
else we correctly obtain the address of the actual struct drm_device.
Analogous to the from_drm_device() helper, provide the
into_drm_device() helper in order to address this.
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The #[pin_data] and #[pin] annotations are not necessary for
drm::Device, since we don't use any pin-init macros, but only
__pinned_init() on the impl PinInit<T::Data, Error> argument of
drm::Device::new().
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250731154919.4132-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
drm::Device is allocated through __drm_dev_alloc() (which uses
kmalloc()) and the driver private data, <T as drm::Driver>::Data, is
initialized in-place.
Due to the order of fields in drm::Device
pub struct Device<T: drm::Driver> {
dev: Opaque<bindings::drm_device>,
data: T::Data,
}
even with an arbitrary large alignment requirement of T::Data it can't
happen that the size of Device is smaller than its alignment requirement.
However, let's not rely on this subtle circumstance and create a proper
kmalloc() compatible Layout.
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
aligned_size() dates back to when Rust did support kmalloc() only, but
is now used in ReallocFunc::call() and hence for all allocators.
However, the additional padding applied by aligned_size() is only
required by the kmalloc() allocator backend.
Hence, replace aligned_size() with Kmalloc::aligned_layout() and use it
for the affected allocators, i.e. kmalloc() and kvmalloc(), only.
While at it, make Kmalloc::aligned_layout() public, such that Rust
abstractions, which have to call subsystem specific kmalloc() based
allocation primitives directly, can make use of it.
Fixes: 8a799831fc ("rust: alloc: implement `ReallocFunc`")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-2-dakr@kernel.org
[ Remove `const` from Kmalloc::aligned_layout(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250808-inv-icm42600-change-temperature-error-code-v1-1-986fbf63b77d@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix possible incorrect channel lookup in the syscalib functions by using
the correct channel address instead of the channel number.
In the ad7124 driver, the channel field of struct iio_chan_spec is the
input pin number of the positive input of the channel. This can be, but
is not always the same as the index in the channels array. The correct
index in the channels array is stored in the address field (and also
scan_index). We use the address field to perform the correct lookup.
Fixes: 47036a03a3 ("iio: adc: ad7124: Implement internal calibration at probe time")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250726-iio-adc-ad7124-fix-channel-lookup-in-syscalib-v1-1-b9d14bb684af@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace using stack-allocated buffers with a DMA-safe buffer for use
with spi_read(). This allows the driver to be safely used with
DMA-enabled SPI controllers.
The buffer array is also converted to a struct with a union to make the
usage of the memory in the buffer more clear and ensure proper alignment.
Fixes: 1f25ca11d8 ("iio: temperature: add support for Maxim thermocouple chips")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3-v2-1-0c68d41ccf6c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a check to ad7173_update_scan_mode() to ensure that we didn't exceed
the maximum number of unique channel configurations.
In the AD7173 family of chips, there are some chips that have 16
CHANNELx registers but only 8 setups (combination of CONFIGx, FILTERx,
GAINx and OFFSETx registers). Since commit 92c2472169 ("iio: adc:
ad7173: fix num_slots"), it is possible to have more than 8 channels
enabled in a scan at the same time, so it is possible to get a bad
configuration when more than 8 channels are using unique configurations.
This happens because the algorithm to allocate the setup slots only
takes into account which slot has been least recently used and doesn't
know about the maximum number of slots available.
Since the algorithm to allocate the setup slots is quite complex, it is
simpler to check after the fact if the current state is valid or not.
So this patch adds a check in ad7173_update_scan_mode() after setting up
all of the configurations to make sure that the actual setup still
matches the requested setup for each enabled channel. If not, we prevent
the scan from being enabled and return an error.
The setup comparison in ad7173_setup_equal() is refactored to a separate
function since we need to call it in two places now.
Fixes: 92c2472169 ("iio: adc: ad7173: fix num_slots")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-adc-ad7173-fix-setup-use-limits-v2-1-8e96bdb72a9c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix passing a u32 value as a u16 buffer scan item. This works on little-
endian systems, but not on big-endian systems.
A new local variable is introduced for getting the register value and
the array is changed to a struct to make the data layout more explicit
rather than just changing the type and having to recalculate the proper
length needed for the timestamp.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-use-more-iio_declare_buffer_with_ts-7-v2-1-d3ebeb001ed3@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Problem
-------
With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status
causes a warning and a NULL pointer dereference.
This is because the AVX-512 timestamp code uses x86_task_fpu() but
doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function
for kernel threads (PF_KTHREAD specifically), making it return NULL.
The point of the warning was to ensure that kernel threads only access
task->fpu after going through kernel_fpu_begin()/_end(). Note: all
kernel tasks exposed in /proc have a valid task->fpu.
Solution
--------
One option is to silence the warning and check for NULL from
x86_task_fpu(). However, that warning is fairly fresh and seems like a
defense against misuse of the FPU state in kernel threads.
Instead, stop outputting AVX-512_elapsed_ms for kernel threads
altogether. The data was garbage anyway because avx512_timestamp is
only updated for user threads, not kernel threads.
If anyone ever wants to track kernel thread AVX-512 use, they can come
back later and do it properly, separate from this bug fix.
[ dhansen: mostly rewrite changelog ]
Fixes: 22aafe3bcb ("x86/fpu: Remove init_task FPU state dependencies, add debugging warning for PF_KTHREAD tasks")
Co-developed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811185044.2227268-1-sohil.mehta%40intel.com
Marc has reported that commit 85975daeaa ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Fixes: 85975daeaa ("cpuidle: menu: Avoid discarding useful information")
Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1]
Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki
There is no reason to limit intel_idle's loading of ACPI tables to
family 6. Upcoming Intel processors are not in family 6.
Below "Fixes" really means "applies cleanly until".
That syntax commit didn't change the previous logic,
but shows this patch applies back 5-years.
Fixes: 4a9f45a053 ("intel_idle: Convert to new X86 CPU match macros")
Signed-off-by: Len Brown <len.brown@intel.com>
Link: https://patch.msgid.link/06101aa4fe784e5b0be1cb2c0bdd9afcf16bd9d4.1754681697.git.len.brown@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
./tools/testing/selftests/sched_ext/hotplug.c: sched.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22941
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):
sched_ext: Invalid task state transition 0 -> 3 for fish[770]
WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
...
RIP: 0010:scx_set_task_state+0x7c/0xc0
...
Call Trace:
<TASK>
scx_enable_task+0x11f/0x2e0
switching_to_scx+0x24/0x110
scx_enable.isra.0+0xd14/0x13d0
bpf_struct_ops_link_create+0x136/0x1a0
__sys_bpf+0x1edd/0x2c30
__x64_sys_bpf+0x21/0x30
do_syscall_64+0xbb/0x370
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.
Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions.
Fixes: a8532fac7b ("sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enable")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The symbol wb_window_usec cannot be found. Update the doc to reflect the
latest implementation, in other words, the debugfs interface
'curr_win_nsec'.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-4-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the current implementation, the last_issue and last_comp members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Therefore, eliminate the ambiguity here.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250727173959.160835-3-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the current implementation, the sync_cookie and last_cookie members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Based on this, we can optimize wbt_done() by removing one if
condition check for non-throttled write requests.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-2-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The infineon,ir38060 binding never got maintainer and fake "Not Me"
entry have been causing dt_binding_check warnings for 1.5 years now:
regulator/infineon,ir38060.yaml: maintainers:0: 'Not Me.' does not match '@'
Guenter agreed to keep an eye for this hardware and binding.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20250811141526.168752-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cec199c5e3 ("futex: Implement FUTEX2_NUMA") introduced the
futex_put_value() helper to write a value to the given user
address.
However, it uses user_read_access_begin() before the write. For
architectures that differentiate between read and write accesses, like
PowerPC, futex_put_value() fails with -EFAULT.
Fix that by using the user_write_access_begin/user_write_access_end() pair
instead.
Fixes: cec199c5e3 ("futex: Implement FUTEX2_NUMA")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811141147.322261-1-longman@redhat.com
GPUVM deserves a bit more coordination, also given the upcoming Rust
work for GPUVM, hence add a dedicated maintainers entry for DRM GPUVM.
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250808092432.461250-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The SRSO bug can theoretically be used to conduct user->user or guest->guest
attacks and requires a mitigation (namely IBPB instead of SBPB on context
switch) for these. So mark SRSO as being applicable to the user->user and
guest->guest attack vectors.
Additionally, SRSO supports multiple mitigations which mitigate different
potential attack vectors. Some CPUs are also immune to SRSO from
certain attack vectors (like user->kernel).
Use the specific attack vectors requiring mitigation to select the best
SRSO mitigation to avoid unnecessary performance hits.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250721160310.1804203-1-david.kaplan@amd.com
