The current iosys_map_clear() implementation reads the potentially
uninitialized 'is_iomem' boolean field to decide which union member
to clear. This causes undefined behavior when called on uninitialized
structures, as 'is_iomem' may contain garbage values like 0xFF.
UBSAN detects this as:
UBSAN: invalid-load in include/linux/iosys-map.h:267
load of value 255 is not a valid value for type '_Bool'
Fix by unconditionally clearing the entire structure with memset(),
eliminating the need to read uninitialized data and ensuring all
fields are set to known good values.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14639
Fixes: 01fd30da04 ("dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptr")
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250718105051.2709487-1-nitin.r.gote@intel.com
Fix failures on big-endian architectures on tests cases
single_pixel_source_buffer, single_pixel_clip_rectangle,
well_known_colors and destination_pitch.
Fixes: 15bda1f8de ("drm/tests: Add calls to drm_fb_blit() on supported format conversion tests")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-2-jose.exposito89@gmail.com
When compiling with sparse enabled, this warning is thrown:
warning: incorrect type in argument 2 (different base types)
expected restricted __le32 const [usertype] *buf
got unsigned int [usertype] *[assigned] buf
Add a cast to fix it.
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-1-jose.exposito89@gmail.com
- A correctness fix for delegated timestamps
- Address an NFSD shutdown hang when LOCALIO is in use
- Prevent a remotely exploitable crasher when TLS is in use
These arrived too late to be included in the initial nfsd-6.17
pull request.
-----BEGIN PGP SIGNATURE-----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=qWSE
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A correctness fix for delegated timestamps
- Address an NFSD shutdown hang when LOCALIO is in use
- Prevent a remotely exploitable crasher when TLS is in use
* tag 'nfsd-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: fix handling of server side tls alerts
nfsd: avoid ref leak in nfsd_open_local_fh()
nfsd: don't set the ctime on delegated atime updates
Add a PCI quirk to enable microphone input on the headphone jack on
the HONOR BRB-X M1010 laptop.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250811132716.45076-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Christoph suggested that the explicit _GPL_ can be dropped from the
module namespace export macro, as it's intended for in-tree modules
only. It would be possible to restrict it technically, but it was
pointed out [2] that some cases of using an out-of-tree build of an
in-tree module with the same name are legitimate. But in that case those
also have to be GPL anyway so it's unnecessary to spell it out in the
macro name.
Link: https://lore.kernel.org/all/aFleJN_fE-RbSoFD@infradead.org/ [1]
Link: https://lore.kernel.org/all/CAK7LNATRkZHwJGpojCnvdiaoDnP%2BaeUXgdey5sb_8muzdWTMkA@mail.gmail.com/ [2]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/20250808-export_modules-v4-1-426945bcc5e1@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
The lflags value used to look up from_path was overwritten by the one used
to look up to_path.
In other words, from_path was looked up with the wrong lflags value. Fix it.
Fixes: f9fde814de ("fs: support getname_maybe_null() in move_mount()")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://lore.kernel.org/20250811052426.129188-1-yuntao.wang@linux.dev
[Christian Brauner <brauner@kernel.org>: massage patch]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Device-mapper can call add_disk() multiple times for the same gendisk
due to its two-phase creation process (dm create + dm load). This leads
to kobject double initialization errors when the underlying iSCSI devices
become temporarily unavailable and then reappear.
However, if the first add_disk() call fails and is retried, the queue_kobj
gets initialized twice, causing:
kobject: kobject (ffff88810c27bb90): tried to init an initialized object,
something is seriously wrong.
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x80
kobject_init.cold+0x43/0x51
blk_register_queue+0x46/0x280
add_disk_fwnode+0xb5/0x280
dm_setup_md_queue+0x194/0x1c0
table_load+0x297/0x2d0
ctl_ioctl+0x2a2/0x480
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x72/0x390
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by separating kobject initialization from sysfs registration:
- Initialize queue_kobj early during gendisk allocation
- add_disk() only adds the already-initialized kobject to sysfs
- del_gendisk() removes from sysfs but doesn't destroy the kobject
- Final cleanup happens when the disk is released
Fixes: 2bd85221a6 ("block: untangle request_queue refcounting from sysfs")
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/all/83591d0b-2467-433c-bce0-5581298eb161@huawei.com/
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250808053609.3237836-1-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250809141358.168781-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250811081135.374315-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ab03a61c66 ("ublk: have a per-io daemon instead of a per-queue
daemon") allowed each ublk I/O to have an independent daemon task.
However, nr_privileged_daemon is only computed based on whether the last
I/O fetched in each ublk queue has an unprivileged daemon task.
Fix this by checking whether every fetched I/O's daemon is privileged.
Change nr_privileged_daemon from a count of queues to a boolean
indicating whether any I/Os have an unprivileged daemon.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ab03a61c66 ("ublk: have a per-io daemon instead of a per-queue daemon")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808155216.296170-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_ch_release currently quiesces the device's request_queue while
setting force_abort/fail_io. This avoids data races by preventing
concurrent reads from the I/O path, but is not strictly needed - at this
point, canceling is already set and guaranteed to be observed by any
concurrently executing I/Os, so they will be handled properly even if
the changes to force_abort/fail_io propagate to the I/O path later.
Remove the quiesce/unquiesce calls from ublk_ch_release. This makes the
writes to force_abort/fail_io concurrent with the reads in the I/O path,
so make the accesses atomic.
Before this change, the call to blk_mq_quiesce_queue was responsible for
most (90%) of the runtime of ublk_ch_release. With that call eliminated,
ublk_ch_release runs much faster. Here is a comparison of the total time
spent in calls to ublk_ch_release when a server handling 128 devices
exits, before and after this change:
before: 1.11s
after: 0.09s
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808-ublk_quiesce2-v1-1-f87ade33fa3d@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the network stack keeps a reference for too long, DRBD keeps
references on a higher number of pages as a consequence.
Fix all that by no longer relying on page reference counts dropping to
an expected value. Instead, DRBD gives up its reference and lets the
system handle everything else. While at it, remove the open-coded
custom page pool mechanism and use the page_pool included in the
kernel.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Link: https://lore.kernel.org/r/20250605103852.23029-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Resolve a conflict between
commit 6a68d28066 ("selftests/coredump: Fix "socket_detect_userspace_client" test failure")
and
commit 994dc26302 ("selftests/coredump: fix build")
The first commit adds a read() to wait for write() from another thread to
finish. But the second commit removes the write().
Now that the two commits are in the same tree, the read() now gets EOF and
the test fails.
Remove this read() so that the test passes.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/20250811074957.4079616-1-namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
With fuse now using iomap for writeback handling, inode blkbits changes
are problematic because iomap relies on inode->i_blkbits for its
internal bitmap logic. Currently we change inode->i_blkbits in fuse to
match the attr->blksize value passed in by the server.
This commit keeps inode->i_blkbits constant in fuse. Any attr->blksize
values passed in by the server will not update inode->i_blkbits. The
client-side behavior for stat is unaffected, stat will still reflect the
blocksize passed in by the server.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/20250807175015.515192-1-joannelkoong@gmail.com
Fixes: ef7e7cbb32 ("fuse: use iomap for writeback")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Aleksa Sarai <cyphar@cyphar.com> says:
As described in commit 7a54947e72 ('Merge patch series "fs: allow
changing idmappings"'), open_tree_attr(2) was necessary in order to
allow for a detached mount to be created and have its idmappings changed
without the risk of any racing threads operating on it. For this reason,
mount_setattr(2) still does not allow for id-mappings to be changed.
However, there was a bug in commit 2462651ffa ("fs: allow changing
idmappings") which allowed users to bypass this restriction by calling
open_tree_attr(2) *without* OPEN_TREE_CLONE.
can_idmap_mount() prevented this bug from allowing an attached
mountpoint's id-mapping from being modified (thanks to an is_anon_ns()
check), but this still allows for detached (but visible) mounts to have
their be id-mapping changed. This risks the same UAF and locking issues
as described in the merge commit, and was likely unintentional.
For what it's worth, I found this while working on the open_tree_attr(2)
man page, and was trying to figure out what open_tree_attr(2)'s
behaviour was in the (slightly fruity) ~OPEN_TREE_CLONE case.
* patches from https://lore.kernel.org/20250808-open_tree_attr-bugfix-idmap-v1-0-0ec7bc05646c@cyphar.com:
selftests/mount_setattr: add smoke tests for open_tree_attr(2) bug
open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE
Link: https://lore.kernel.org/20250808-open_tree_attr-bugfix-idmap-v1-0-0ec7bc05646c@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit d279c80e0b ("iomap: inline iomap_dio_bio_opflags()") has broken
the logic in iomap_dio_bio_iter() in a way that when the device does
support FUA (or has no writeback cache) and the direct IO happens to
freshly allocated or unwritten extents, we will *not* issue fsync after
completing direct IO O_SYNC / O_DSYNC write because the
IOMAP_DIO_WRITE_THROUGH flag stays mistakenly set. Fix the problem by
clearing IOMAP_DIO_WRITE_THROUGH whenever we do not perform FUA write as
it was originally intended.
CC: John Garry <john.g.garry@oracle.com>
CC: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Fixes: d279c80e0b ("iomap: inline iomap_dio_bio_opflags()")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250730102840.20470-2-jack@suse.cz
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There appear to be no other open_tree_attr(2) tests at the moment, but
as a minimal solution just add some additional checks in the existing
MOUNT_ATTR_IDMAP tests to make sure that open_tree_attr(2) cannot be
used to bypass the tested restrictions that apply to mount_setattr(2).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250808-open_tree_attr-bugfix-idmap-v1-2-0ec7bc05646c@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
As described in commit 7a54947e72 ('Merge patch series "fs: allow
changing idmappings"'), open_tree_attr(2) was necessary in order to
allow for a detached mount to be created and have its idmappings changed
without the risk of any racing threads operating on it. For this reason,
mount_setattr(2) still does not allow for id-mappings to be changed.
However, there was a bug in commit 2462651ffa ("fs: allow changing
idmappings") which allowed users to bypass this restriction by calling
open_tree_attr(2) *without* OPEN_TREE_CLONE.
can_idmap_mount() prevented this bug from allowing an attached
mountpoint's id-mapping from being modified (thanks to an is_anon_ns()
check), but this still allows for detached (but visible) mounts to have
their be id-mapping changed. This risks the same UAF and locking issues
as described in the merge commit, and was likely unintentional.
Fixes: 2462651ffa ("fs: allow changing idmappings")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250808-open_tree_attr-bugfix-idmap-v1-1-0ec7bc05646c@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
xfs_zone_record_blocks not only records successfully written blocks that
now back file data, but is also used for blocks speculatively written by
garbage collection that were never linked to an inode and instantly
become invalid.
Split the latter functionality out to be easier to understand. This also
make it clear that we don't need to attach the rmap inode to a
transaction for the skipped blocks case as we never dirty any peristent
data structure.
Also make the argument order to xfs_zone_record_blocks a bit more
natural.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If the FS has no reflink, then atomic writes greater than 1x block are not
supported. As such, for no reflink it is pointless to accept setting
max_atomic_write when it cannot be supported, so reject max_atomic_write
mount option in this case.
It could be still possible to accept max_atomic_write option of size 1x
block if HW atomics are supported, so check for this specifically.
Fixes: 4528b90527 ("xfs: allow sysadmins to specify a maximum atomic write limit at mount time")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Atomic writes are not currently supported for DAX, but two problems exist:
- we may go down DAX write path for IOCB_ATOMIC, which does not handle
IOCB_ATOMIC properly
- we report non-zero atomic write limits in statx (for DAX inodes)
We may want atomic writes support on DAX in future, but just disallow for
now.
For this, ensure when IOCB_ATOMIC is set that we check the write size
versus the atomic write min and max before branching off to the DAX write
path. This is not strictly required for DAX, as we should not get this far
in the write path as FMODE_CAN_ATOMIC_WRITE should not be set.
In addition, due to reflink being supported for DAX, we automatically get
CoW-based atomic writes support being advertised. Remedy this by
disallowing atomic writes for a DAX inode for both sw and hw modes.
Reported-by: Darrick J. Wong <djwong@kernel.org>
Fixes: 9dffc58f23 ("xfs: update atomic write limits")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The DAX write path does not support IOCB_ATOMIC, so reject it when set.
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a new field to struct xfs_ibulk to directly pass XFS_IWALK* flags,
and thus remove the need to indirect the SAME_AG flag through
XFS_IBULK*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c5 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags")
Cc: <stable@vger.kernel.org> # v5.19
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 83a80e95e7 ("xfs: decouple xfs_trans_alloc_empty from
xfs_trans_alloc") move the place of the assert for a frozen file system
after the sb_start_intwrite call that ensures it doesn't run on frozen
file systems, and thus allows to incorrect trigger it.
Fix that by moving it back to where it belongs.
Fixes: 83a80e95e7 ("xfs: decouple xfs_trans_alloc_empty from xfs_trans_alloc")
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
After commit 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.
Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RCU re-initializes the deferred QS irq work everytime before attempting
to queue it. However there are situations where the irq work is
attempted to be queued even though it is already queued. In that case
re-initializing messes-up with the irq work queue that is about to be
handled.
The chances for that to happen are higher when the architecture doesn't
support self-IPIs and irq work are then all lazy, such as with the
following sequence:
1) rcu_read_unlock() is called when IRQs are disabled and there is a
grace period involving blocked tasks on the node. The irq work
is then initialized and queued.
2) The related tasks are unblocked and the CPU quiescent state
is reported. rdp->defer_qs_iw_pending is reset to DEFER_QS_IDLE,
allowing the irq work to be requeued in the future (note the previous
one hasn't fired yet).
3) A new grace period starts and the node has blocked tasks.
4) rcu_read_unlock() is called when IRQs are disabled again. The irq work
is re-initialized (but it's queued! and its node is cleared) and
requeued. Which means it's requeued to itself.
5) The irq work finally fires with the tick. But since it was requeued
to itself, it loops and hangs.
Fix this with initializing the irq work only once before the CPU boots.
Fixes: b41642c877 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071303.c1134cce-lkp@intel.com
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Since EROFS handles decompression in non-atomic contexts due to
uncontrollable decompression latencies and vmap() usage, it tries
to detect atomic contexts and only kicks off a kworker on demand
in order to reduce unnecessary scheduling overhead.
However, the current approach is insufficient and can lead to
sleeping function calls in invalid contexts, causing kernel
warnings and potential system instability. See the stacktrace [1]
and previous discussion [2].
The current implementation only checks rcu_read_lock_any_held(),
which behaves inconsistently across different kernel configurations:
- When CONFIG_DEBUG_LOCK_ALLOC is enabled: correctly detects
RCU critical sections by checking rcu_lock_map
- When CONFIG_DEBUG_LOCK_ALLOC is disabled: compiles to
"!preemptible()", which only checks preempt_count and misses
RCU critical sections
This patch introduces z_erofs_in_atomic() to provide comprehensive
atomic context detection:
1. Check RCU preemption depth when CONFIG_PREEMPTION is enabled,
as RCU critical sections may not affect preempt_count but still
require atomic handling
2. Always use async processing when CONFIG_PREEMPT_COUNT is disabled,
as preemption state cannot be reliably determined
3. Fall back to standard preemptible() check for remaining cases
The function replaces the previous complex condition check and ensures
that z_erofs always uses (kthread_)work in atomic contexts to minimize
scheduling overhead and prevent sleeping in invalid contexts.
[1] Problem stacktrace
[ 61.266692] BUG: sleeping function called from invalid context at kernel/locking/rtmutex_api.c:510
[ 61.266702] in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 107, name: irq/54-ufshcd
[ 61.266704] preempt_count: 0, expected: 0
[ 61.266705] RCU nest depth: 2, expected: 0
[ 61.266710] CPU: 0 UID: 0 PID: 107 Comm: irq/54-ufshcd Tainted: G W O 6.12.17 #1
[ 61.266714] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 61.266715] Hardware name: schumacher (DT)
[ 61.266717] Call trace:
[ 61.266718] dump_backtrace+0x9c/0x100
[ 61.266727] show_stack+0x20/0x38
[ 61.266728] dump_stack_lvl+0x78/0x90
[ 61.266734] dump_stack+0x18/0x28
[ 61.266736] __might_resched+0x11c/0x180
[ 61.266743] __might_sleep+0x64/0xc8
[ 61.266745] mutex_lock+0x2c/0xc0
[ 61.266748] z_erofs_decompress_queue+0xe8/0x978
[ 61.266753] z_erofs_decompress_kickoff+0xa8/0x190
[ 61.266756] z_erofs_endio+0x168/0x288
[ 61.266758] bio_endio+0x160/0x218
[ 61.266762] blk_update_request+0x244/0x458
[ 61.266766] scsi_end_request+0x38/0x278
[ 61.266770] scsi_io_completion+0x4c/0x600
[ 61.266772] scsi_finish_command+0xc8/0xe8
[ 61.266775] scsi_complete+0x88/0x148
[ 61.266777] blk_mq_complete_request+0x3c/0x58
[ 61.266780] scsi_done_internal+0xcc/0x158
[ 61.266782] scsi_done+0x1c/0x30
[ 61.266783] ufshcd_compl_one_cqe+0x12c/0x438
[ 61.266786] __ufshcd_transfer_req_compl+0x2c/0x78
[ 61.266788] ufshcd_poll+0xf4/0x210
[ 61.266789] ufshcd_transfer_req_compl+0x50/0x88
[ 61.266791] ufshcd_intr+0x21c/0x7c8
[ 61.266792] irq_forced_thread_fn+0x44/0xd8
[ 61.266796] irq_thread+0x1a4/0x358
[ 61.266799] kthread+0x12c/0x138
[ 61.266802] ret_from_fork+0x10/0x20
[2] https://lore.kernel.org/r/58b661d0-0ebb-4b45-a10d-c5927fb791cd@paulmck-laptop
Signed-off-by: Junli Liu <liujunli@lixiang.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250805011957.911186-1-liujunli@lixiang.com
[ Gao Xiang: Use the original trace in v1. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The EROFS filesystem has many configurable options, controlled through
boolean Kconfig symbols. When enabled, these options may need to enable
additional library functionality elsewhere. Currently this is done by
selecting the symbol for the additional functionality. However, if
EROFS_FS itself is modular, and the target symbol is a tristate symbol,
the additional functionality is always forced built-in.
Selecting tristate symbols from a tristate symbol does keep modular
transitivity. Hence fix this by moving selects of tristate symbols to
the main EROFS_FS symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/da1b899e511145dd43fd2d398f64b2e03c6a39e7.1753879351.git.geert+renesas@glider.be
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
If using multiple devices, we should check if the extra device support
DAX instead of checking the primary device when deciding if to use DAX
to access a file.
If an extra device does not support DAX we should fallback to normal
access otherwise the data on that device will be inaccessible.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Friendy Su <friendy.su@sony.com>
Reviewed-by: Jacky Cao <jacky.cao@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250804082030.3667257-2-Yuezhang.Mo@sony.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
commit acc84d15e4 ("ASoC: generic: Standardize ASoC menu")
standardized ASoC generic menu. Then, it moved generic menu position
under SoC group. It should be kept generic position. Tidyup it.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7n0c9d0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a failure message, replace the
message with something a little more meaningful.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250808105324.829883-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have a component driver named "RX-MACRO", which is
lpass-rx-macro.c. The tx macro component driver's name should
be "TX-MACRO" accordingly. Fix it.
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250806140030.691477-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ec ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e591 ("ASoC: fsl_sai: Force a software reset when starting in consumer mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Besides sending the rename request to the server, the rename process
also involves closing any deferred close, waiting for outstanding I/O
to complete as well as marking all existing open handles as deleted to
prevent them from deferring closes, which increases the race window
for potential concurrent opens on the target file.
Fix this by unhashing the dentry in advance to prevent any concurrent
opens on the target.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
According to some logs reported by customers, CIFS client might end up
reporting unlinked files as existing in stat(2) due to concurrent
opens racing with unlink(2).
Besides sending the removal request to the server, the unlink process
could involve closing any deferred close as well as marking all
existing open handles as deleted to prevent them from deferring
closes, which increases the race window for potential concurrent
opens.
Fix this by unhashing the dentry in cifs_unlink() to prevent any
subsequent opens. Any open attempts, while we're still unlinking,
will block on parent's i_rwsem.
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
-----BEGIN PGP SIGNATURE-----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=1iYa
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
-----BEGIN PGP SIGNATURE-----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=VUGL
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
