mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-26 21:52:20 +00:00
loongarch-next
48231 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tiezhu Yang
|
a47bc954cf |
objtool/LoongArch: Get table size correctly if LTO is enabled
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes:
|
||
|
Linus Torvalds
|
63467137ec |
Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
|
||
|
Davide Caratti
|
774a2ae661 |
selftests: net/forwarding: test purge of active DWRR classes
Extend sch_ets.sh to add a reproducer for problematic list deletions when active DWRR class are purged by ets_qdisc_change() [1] [2]. [1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/f3b9bacc73145f265c19ab80785933da5b7cbdec.1754581577.git.dcaratti@redhat.com/ Suggested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/489497cb781af7389011ca1591fb702a7391f5e7.1755016081.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
91325f31af |
12 hotfixes. 5 are cc:stable and the remainder address post-6.16 issues
or aren't considered necessary for -stable kernels. 10 of these fixes are for MM. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaJwLpgAKCRDdBJ7gKXxA js1sAP0c/XlVJhICq9aNJluu4Nj7cKTlzN7nvD/YRivZrG8XJQD/Q5nvFY6yeOdi /HxCAdTDY5HsWv28nEbvnxKKbuFligU= =mtKs -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "12 hotfixes. 5 are cc:stable and the remainder address post-6.16 issues or aren't considered necessary for -stable kernels. 10 of these fixes are for MM" * tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: proc: proc_maps_open allow proc_mem_open to return NULL mm/mremap: avoid expensive folio lookup on mremap folio pte batch userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry mm: pass page directly instead of using folio_page selftests/proc: fix string literal warning in proc-maps-race.c fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats mm/smaps: fix race between smaps_hugetlb_range and migration mm: fix the race between collapse and PT_RECLAIM under per-vma lock mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup() MAINTAINERS: add Masami as a reviewer of hung task detector mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock kasan/test: fix protection against compiler elision |
||
|
Jakub Kicinski
|
d7e82594a4 |
selftests: tls: test TCP stealing data from under the TLS socket
Check a race where data disappears from the TCP socket after TLS signaled that its ready to receive. ok 6 global.data_steal # RUN tls_basic.base_base ... # OK tls_basic.base_base Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250807232907.600366-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
bda053d644 |
selftests: drv-net: don't assume device has only 2 queues
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes:
|
||
|
Sukrut Heroorkar
|
ab5ac789ef |
selftests/proc: fix string literal warning in proc-maps-race.c
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Link: https://lkml.kernel.org/r/20250804225633.841777-1-hsukrut3@gmail.com
Fixes:
|
||
|
Linus Torvalds
|
2b38afce25 |
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
-----BEGIN PGP SIGNATURE-----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=1iYa
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
|
||
|
Len Brown
|
5e98a5e73e |
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology Add ability to average an added counter (useful for pre-integrated "counters", such as Watts) Break the limit of 64 built-in counters. Assorted bug fixes and minor feature tweaks Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
e60a13bcef |
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/ may be readable by all, but /sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz may be readable only by root. Non-root turbostat users see complaints in this scenario. Fail probe of the interface if we can't read current_freq_khz. Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
378e901160 |
tools/power turbostat: standardize PER_THREAD_PARAMS
use a macro for PER_THREAD_PARAMS to make adding one later more clear. no functional change Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Zhang Rui
|
3a088b07c4 |
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes:
|
||
|
Michael Hebenstreit
|
dcd1c379b0 |
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines for nodes/packages (or with option -S). The new format "average" behaves like "raw" but also adds the summary data Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
a5015d945d |
tools/power turbostat: delete GET_PKG()
pkg_base[pkg_id] is a simple array of structure pointers, let the compiler treat it that way. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
5f961fb2a7 |
tools/power turbostat: probe and display L3 cache topology
Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
8d14a098b4 |
tools/power turbostat: Support more than 64 built-in-counters
We have out-grown the ability to use a 64-bit memory location to inventory every possible built-in counter. Leverage the the CPU_SET(3) macros to break this barrier. Also, break the Joules & Watts counters into two, since we can no longer 'or' them together... Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
d240b441b5 |
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
Explain the meaning of the Totl%C0, Any%C0, GFX%C0, CPUGFX% columns. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Linus Torvalds
|
c30a13538d |
bpf-fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiWKasACgkQ6rmadz2v bToTMhAAmAvsOqfaoYR0LfmuwPZj9F0bqg9voRRgHNnf3j1Iz0L2po65pdbJGQPs mf+KivbeWsPic8AD0mnbgPLgPXNYsunxsQ+k5LfShbtECZ+0QqUmT27EAIhsHWTr ghWmMZ6E3kq7bfsTaNAtJNjiovHCr+swqpZoJpAlwz1CxNhESDIjdDzGtarPNxHw s3ioI9gvPuH4x5vq7SblyfgeYJWNk0ZELISmdNEud1nBrdR91Ji2Iqxwkky0qhKI 4kQzN9MmjsIl4dIa1DMlQsMpKkC/sHtoFW2VEUkuHUwP+wa/YIn7iAvD7xc2k3nS 2fLzlpfZnSIdu+2piu9A7RoU4VI/XyC+tud6WmDYGN/xKgA0N7BmoBQjhgptj+uH BitpTGmFPoDuRiQDKHiGPTP6Wc4djt0Ipp6hFr89Q2ywCUCrylRafuJDpOn6xwzG VZH6yK1cMk2kIa8jArGjMtvcWiMbaMn6GwxjQaPC+Syhy6dmAWVmcyEKYXki8GAc N+gl0bBGHEGhcCCuyzxFAOLKx81CDp5C+gfoCzt3lDAXztrd1PeaZV+n9c6jtgVT VPO9TahYqnsfuLPBVDTCGSvVsTP2Fh2fIcdsEJvcF1EISBiwYBw6FGpDi4WlbOfm pisRchdT0YV6vg0V+f2U6mL5UbZr7v5w5PAfh7zXCqvfppoPD8U= =Qt6J -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Alexei Starovoitov: - Fix memory leak of bpf_scc_info objects (Eduard Zingerman) - Fix a regression in the 'perf' tool caused by moving UID filtering to BPF (Ilya Leoshkevich) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: perf bpf-filter: Enable events manually libbpf: Add the ability to suppress perf event enablement bpf: Fix memory leak of bpf_scc_info objects |
||
|
Zhang Rui
|
44207567fa |
tools/power turbostat: Fix bogus SysWatt for forked program
Similar to delta_cpu(), delta_platform() is called in turbostat main
loop. This ensures accurate SysWatt readings in periodic monitoring mode
$ sudo turbostat -S -q --show power -i 1
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07
58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75
58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22
58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55
However, delta_platform() is missing for forked program and causes bogus
SysWatt reporting,
$ sudo turbostat -S -q --show power sleep 1
1.004736 sec
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03
Add missing delta_platform() for forked program.
Fixes:
|
||
|
Calvin Owens
|
d34fe509f5 |
tools/power turbostat: Handle cap_get_proc() ENOSYS
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc(). Check for ENOSYS to recognize this case, and continue on to attempt to access the requested MSRs (such as temperature). Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Calvin Owens
|
6ea0ec1b95 |
tools/power turbostat: Fix build with musl
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
||
|
Len Brown
|
d44c40e4e3 |
tools/power turbostat: verify arguments to params --show and --hide
$ sudo turbostat --quiet --show junk turbostat: Counter 'junk' can not be added. Previously, invalid arguments to --show and --hide were silently ignored Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Linus Torvalds
|
3781648824 |
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- number of device tree / OF reference leak fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nwy7
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
|
||
|
Ilya Leoshkevich
|
5e2ac8e857 |
perf bpf-filter: Enable events manually
On s390, and, in general, on all platforms where the respective event
supports auxiliary data gathering, the command:
# ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
# ./perf report --stats | grep SAMPLE
#
does not generate samples in the perf.data file. On x86 the command:
# sudo perf record -e intel_pt// -u 0 ls
is broken too.
Looking at the sequence of calls in 'perf record' reveals this
behavior:
1. The event 'cycles' is created and enabled:
record__open()
+-> evlist__apply_filters()
+-> perf_bpf_filter__prepare()
+-> bpf_program.attach_perf_event()
+-> bpf_program.attach_perf_event_opts()
+-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)
The event 'cycles' is enabled and active now. However the event's
ring-buffer to store the samples generated by hardware is not
allocated yet.
2. The event's fd is mmap()ed to create the ring buffer:
record__open()
+-> record__mmap()
+-> record__mmap_evlist()
+-> evlist__mmap_ex()
+-> perf_evlist__mmap_ops()
+-> mmap_per_cpu()
+-> mmap_per_evsel()
+-> mmap__mmap()
+-> perf_mmap__mmap()
+-> mmap()
This allocates the ring buffer for the event 'cycles'. With mmap()
the kernel creates the ring buffer:
perf_mmap(): kernel function to create the event's ring
| buffer to save the sampled data.
|
+-> ring_buffer_attach(): Allocates memory for ring buffer.
| The PMU has auxiliary data setup function. The
| has_aux(event) condition is true and the PMU's
| stop() is called to stop sampling. It is not
| restarted:
|
| if (has_aux(event))
| perf_event_stop(event, 0);
|
+-> cpumsf_pmu_stop():
Hardware sampling is stopped. No samples are generated and saved
anymore.
3. After the event 'cycles' has been mapped, the event is enabled a
second time in:
__cmd_record()
+-> evlist__enable()
+-> __evlist__enable()
+-> evsel__enable_cpu()
+-> perf_evsel__enable_cpu()
+-> perf_evsel__run_ioctl()
+-> perf_evsel__ioctl()
+-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)
The second
ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);
is just a NOP in this case. The first invocation in (1.) sets the
event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions
perf_ioctl()
+-> _perf_ioctl()
+-> _perf_event_enable()
+-> __perf_event_enable()
return immediately because event::state is already set to
PERF_EVENT_STATE_ACTIVE.
This happens on s390, because the event 'cycles' offers the possibility
to save auxilary data. The PMU callbacks setup_aux() and free_aux() are
defined. Without both callback functions, cpumsf_pmu_stop() is not
invoked and sampling continues.
To remedy this, remove the first invocation of
ioctl(..., PERF_EVENT_IOC_ENABLE, ...).
in step (1.) Create the event in step (1.) and enable it in step (3.)
after the ring buffer has been mapped.
Output after:
# ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.876 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 16200 (99.5%)
SAMPLE events: 16200
#
The software event succeeded both before and after the patch:
# ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
./perf test -w thloop 2
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 2.870 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 53506 (99.8%)
SAMPLE events: 53506
#
Fixes:
|
||
|
Ilya Leoshkevich
|
9474e27a24 |
libbpf: Add the ability to suppress perf event enablement
Automatically enabling a perf event after attaching a BPF prog to it is not always desirable. Add a new "dont_enable" field to struct bpf_perf_event_opts. While introducing "enable" instead would be nicer in that it would avoid a double negation in the implementation, it would make DECLARE_LIBBPF_OPTS() less efficient. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-2-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
adf12a394c |
Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which causes
perf_mmap_close() to ignore the unmap or unmap the wrong buffer.
- Several internal issues of perf_mmap(), which can cause reference count
leaks in the perf mmap, corrupt accounting or cause leaks in perf
drivers.
The main fix is to prevent VMA splits by implementing the [may_]split()
callback for vm operations. The other issues are addressed by rearranging
code, early returns on failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that requires
larger refactoring of the code and will be done once these fixes are
upstream.
-----BEGIN PGP SIGNATURE-----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=B9L/
-----END PGP SIGNATURE-----
Merge tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
|
||
|
Samiullah Khawaja
|
e6d7626881 |
net: Update threaded state in napi config in netif_set_threaded
Commit |
||
|
Ido Schimmel
|
8d22aea8af |
selftests: netdevsim: Xfail nexthop test on slow machines
A lot of test cases in the file are related to the idle and unbalanced timers of resilient nexthop groups and these tests are reported to be flaky on slow machines running debug kernels. Rather than marking a lot of individual tests with xfail_on_slow(), simply mark all the tests. Note that the test is stable on non-debug machines and that with debug kernels we are mainly interested in the output of various sanitizers in order to determine pass / fail. Before: # make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \ TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \ TEST_GEN_PROGS="" run_tests [...] # TEST: Bucket migration after idle timer (with delete) [FAIL] # Group expected to still be unbalanced [...] not ok 1 selftests: drivers/net/netdevsim: nexthop.sh # exit=1 After: # make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \ TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \ TEST_GEN_PROGS="" run_tests [...] # TEST: Bucket migration after idle timer (with delete) [XFAIL] # Group expected to still be unbalanced [...] ok 1 selftests: drivers/net/netdevsim: nexthop.sh Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20250729160609.02e0f157@kernel.org/ Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250804114320.193203-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lorenzo Stoakes
|
084d2ac403 |
selftests/perf_events: Add a mmap() correctness test
Exercise various mmap(), munmap() and mremap() invocations, which might cause a perf buffer mapping to be split or truncated. To avoid hard coding the perf event and having dependencies on architectures and configuration options, scan through event types in sysfs and try to open them. On success, try to mmap() and if that succeeds try to mmap() the AUX buffer. In case that no AUX buffer supporting event is found, only test the base buffer mapping. If no mappable event is found or permissions are not sufficient, skip the tests. Reserve a PROT_NONE region for both rb and aux tests to allow testing the case where mremap unmaps beyond the end of a mapped VMA to prevent it from unmapping unrelated mappings. Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> |
||
|
Linus Torvalds
|
da23ea194d |
Significant patch series in this pull request:
- The 4 patch series "mseal cleanups" from Lorenzo Stoakes erforms some
mseal cleaning with no intended functional change.
- The 3 patch series "Optimizations for khugepaged" from David
Hildenbrand improves khugepaged throughput by batching PTE operations
for large folios. This gain is mainly for arm64.
- The 8 patch series "x86: enable EXECMEM_ROX_CACHE for ftrace and
kprobes" from Mike Rapoport provides a bugfix, additional debug code and
cleanups to the execmem code.
- The 7 patch series "mm/shmem, swap: bugfix and improvement of mTHP
swap in" from Kairui Song provides bugfixes, cleanups and performance
improvememnts to the mTHP swapin code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+6HQAKCRDdBJ7gKXxA
jv7lAQCAKE5dUhdZ0pOYbhBKTlDapQh2KqHrlV3QFcxXgknEoQD/c3gG01rY3fLh
Cnf5l9+cdyfKxFniO48sUPx6IpriRg8=
=HT5/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
|
||
|
Jakub Kicinski
|
5ef7fdf52c |
selftests: net: packetdrill: xfail all problems on slow machines
We keep seeing flakes on packetdrill on debug kernels, while non-debug kernels are stable, not a single flake in 200 runs. Time to give up, debug kernels appear to suffer from 10msec latency spikes and any timing-sensitive test is bound to flake. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250801181638.2483531-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
806381e1a2 |
powerpc fixes for 6.17 #2
- Fixes for several issues in the powernv PCI hotplug path - Fix htmldoc generation for htm.rst in toctree - Add jit support for load_acquire and store_release in ppc64 bpf jit Thanks to: Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar, Shawn Anastasio, Timothy Pearson, Vishal Parmar -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmiQDOcACgkQpnEsdPSH ZJRqTBAAkpaZRrbzX6P1fjoTb89esIfY7YSymmXrgMwoF1fgTMzPSjg2Lzwzcjfb Ednlo8Hy+Ei2SDvctNaqtOcZuidn81AJN41aFIu44S/Mj1cde/cuBMKUTqx+ZBO0 gI4Bd4+V7yEv484PF7ZJga9K1VM85THCLgVWJ00VNHVHyvxgAuFiXdWmh6/qMUyi thvvLR+ANuAQz3S4VwbBg3AifDl6LXx2s5VB30xYxnPKzFNKZmnGXKwuOJH7rQe2 J8v99n0tcXW1tRGE4pVykzXg4EXL5zgWT9fJ5EZxbeXaW9sqMxi4VjO4jSsrSZ+K q2v362Dyjgygel9aC2rzN8Q+P5horX2QBR7knJJGa0VtztUiPWKR8za7vGLbzlcm rUvnTuoY1dwFB72Sy3amALalvWscssL/1sHazvRv65RcciW7/PZNVEiZ0xh1RKqb J8nWlb+iNBf2z12qLmS5DvUaveaZG1eyndLeD/knsEC49DEOoEy3t7QM1F7KscRR mYPsEpfjF/D0r+vzb6zl2ykwhJf/t7BNu7MdXH7xbIpj5iwtrhSUfvmx6g2MThzA Vee2QvQACscdop3W/6xgATH4xoq96v1XxMmCLnZ/HVl2PorxO27ad4EMNO4sBG8c 5agWHT7EnoUgwNF30DRtIHd7jNK/jt8++3kZx6CG9hdSboAM/pM= =tTms -----END PGP SIGNATURE----- Merge tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Fixes for several issues in the powernv PCI hotplug path - Fix htmldoc generation for htm.rst in toctree - Add jit support for load_acquire and store_release in ppc64 bpf jit Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar * tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc64/bpf: Add jit support for load_acquire and store_release docs: powerpc: add htm.rst to toctree PCI: pnv_php: Enable third attention indicator state PCI: pnv_php: Fix surprise plug detection and recovery powerpc/eeh: Make EEH driver device hotplug safe powerpc/eeh: Export eeh_unfreeze_pe() PCI: pnv_php: Work around switches with broken presence detection PCI: pnv_php: Clean up allocated IRQs on unplug |
||
|
Linus Torvalds
|
e991acf1bc |
Significant patch series in this pull request:
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
||
|
Lorenzo Stoakes
|
f225b34f1e |
mm/mseal: always define VM_SEALED
Patch series "mseal cleanups", v4. Perform a number of cleanups to the mseal logic. Firstly, VM_SEALED is treated differently from every other VMA flag, it really doesn't make sense to do this, so we start by making this consistent with everything else. Next we place the madvise logic where it belongs - in mm/madvise.c. It really makes no sense to abstract this elsewhere. In doing so, we go to great lengths to explain very clearly the previously very confusing logic as to what sealed mappings are impacted here. In doing so, we retain existing logic regarding treatment of madvise() discard operations for a sealed, read-only MAP_PRIVATE file-backed mapping. This is something we likely need to revisit. We then abstract out and explain the 'are there are any gaps in this range in the mm?' check being performed as a prerequisite to mseal being performed. Finally, we simplify the actual mseal logic which is really quite straightforward. No functional change is intended. This patch (of 4): There is no reason to treat VM_SEALED in a special way, in each other case in which a VMA flag is unavailable due to configuration, we simply assign that flag to VM_NONE, so make VM_SEALED consistent with all other VMA flags in this respect. Additionally, use the next available bit for VM_SEALED, 42, rather than arbitrarily putting it at 63 and update the declaration to match all other VMA flags. No functional change intended. Link: https://lkml.kernel.org/r/cover.1753431105.git.lorenzo.stoakes@oracle.com Link: https://lkml.kernel.org/r/aeb398a77029b6e7377cd944328bc9bbc3c90537.1753431105.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jeff Xu <jeffxu@chromium.org> Cc: Kees Cook <kees@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Suresh K C
|
d6a511dea4 |
selftests: cachestat: add tests for mmap, refactor and enhance mmap test for cachestat validation
Add a cohesive test case that verifies cachestat behavior with memory-mapped files using mmap(). Also refactor the test logic to reduce redundancy, improve error reporting, and clarify failure messages for both shmem and mmap file types. [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20250709174657.6916-1-suresh.k.chandrappa@gmail.com Signed-off-by: Suresh K C <suresh.k.chandrappa@gmail.com> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Tested-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
wang lian
|
b50e37889f |
selftests/mm: add process_madvise() tests
Add tests for process_madvise(), focusing on verifying behavior under various conditions including valid usage and error cases. [lianux.mm@gmail.com: v7] Link: https://lkml.kernel.org/r/20250729113109.12272-1-lianux.mm@gmail.com Link: https://lkml.kernel.org/r/20250729113109.12272-1-lianux.mm@gmail.com Link: https://lkml.kernel.org/r/20250721114614.40996-1-lianux.mm@gmail.com Signed-off-by: wang lian <lianux.mm@gmail.com> Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Zi Yan <ziy@nvidia.com> Suggested-by: Mark Brown <broonie@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Zi Yan <ziy@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Kairui Song <ryncsn@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Fan Yu
|
085dece6cc |
tools/getdelays: add backward compatibility for taskstats version
Add version checks to print_delayacct() to handle differences in struct
taskstats across kernel versions. Field availability depends on taskstats
version (t->version), corresponding to TASKSTATS_VERSION in kernel headers
(see include/uapi/linux/taskstats.h).
Version feature mapping:
- version >= 11 - supports COMPACT statistics
- version >= 13 - supports WPCOPY statistics
- version >= 14 - supports IRQ statistics
- version >= 16 - supports *_max and *_min delay statistics
This ensures the tool works correctly with both older and newer kernel
versions by conditionally printing fields based on the reported version.
eg.1
bash# grep -r "#define TASKSTATS_VERSION" /usr/include/linux/taskstats.h
"#define TASKSTATS_VERSION 10"
bash# ./getdelays -d -p 1
CPU count real total virtual total delay total delay average
7481 3786181709 3807098291 36393725 0.005ms
IO count delay total delay average
369 1116046035 3.025ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
eg.2
bash# grep -r "#define TASKSTATS_VERSION" /usr/include/linux/taskstats.h
"#define TASKSTATS_VERSION 14"
bash# ./getdelays -d -p 1
CPU count real total virtual total delay total delay average
68862 163474790046 174584722267 19962496806 0.290ms
IO count delay total delay average
0 0 0.000ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
COMPACT count delay total delay average
0 0 0.000ms
WPCOPY count delay total delay average
0 0 0.000ms
IRQ count delay total delay average
0 0 0.000ms
Link: https://lkml.kernel.org/r/20250731225326549CttJ7g9NfjTlaqBwl015T@zte.com.cn
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Mike Rapoport (Microsoft)
|
b753522bed |
kho: add test for kexec handover
Testing kexec handover requires a kernel driver that will generate some data and preserve it with KHO on the first boot and then restore that data and verify it was preserved properly after kexec. To facilitate such test, along with the kernel driver responsible for data generation, preservation and restoration add a script that runs a kernel in a VM with a minimal /init. The /init enables KHO, loads a kernel image for kexec and runs kexec reboot. After the boot of the kexeced kernel, the driver verifies that the data was properly preserved. [rppt@kernel.org: fix section mismatch] Link: https://lkml.kernel.org/r/aIiRC8fXiOXKbPM_@kernel.org Link: https://lkml.kernel.org/r/20250727083733.2590139-1-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Graf <graf@amazon.com> Cc: Changyuan Lyu <changyuanl@google.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pratyush Yadav <pratyush@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
fan.yu9@zte.com.cn
|
d92dccd05a |
delaytop: enhance error logging and add PSI feature description
This patch improves error diagnostics and documentation for delaytop: 1) Enhanced error logging: - Added explicit error messages in critical failure paths - Implemented BOOL_FPRINT macro for robust output handling 2) PSI feature documentation: - Updated header comment to reflect PSI monitoring capability - Improved output formatting for PSI information System Pressure Information: (avg10/avg60/avg300/total) CPU some: 0.0%/ 0.0%/ 0.0%/ 345(ms) CPU full: 0.0%/ 0.0%/ 0.0%/ 0(ms) Memory full: 0.0%/ 0.0%/ 0.0%/ 0(ms) Memory some: 0.0%/ 0.0%/ 0.0%/ 0(ms) IO full: 0.0%/ 0.0%/ 0.0%/ 65(ms) IO some: 0.0%/ 0.0%/ 0.0%/ 79(ms) IRQ full: 0.0%/ 0.0%/ 0.0%/ 0(ms) Link: https://lkml.kernel.org/r/202507281628341752gMXCMN7S-Vz_LHYHum9r@zte.com.cn Signed-off-by: Fan Yu <fan.yu9@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Acked-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
a6923c06a3 |
bpf-fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiNNksACgkQ6rmadz2v bTrKRhAAnju4bbFRHU88Y68p6Meq/jxgjxHZAkTqZA0Nvbu2cItPRL7XHAAhTWE7 OBEIm3UKCH4gs4fY8rDHiIgnnaQavXUmvXZblOIOjxnqRKJpU3px+wwJvGFq5Enq WP6UZV8tj+O2tNfNNYS+mgQvvIpUISHGpKimvx7ede3e1U3cJBkppbT3gooMHYuc 5s1QtYHWaPY/1DpkHgqJ2UPGcbT9/HSPGMHRNaHKjQTcNcLcrj7RRjchgXqcc7Vs hVijvVrLiuK0MyU42ritmaqvjjgD6hKPZguRQe2/hAtrOo0Alf+4mXkMgam7simN iHfGc7nhw1xAFTPj4WXahja89G00FdDN5NR37Rgurm/i2fY7BuXAkMjiMiwGB3C3 jk2wG3RSifYeC2rxhkYJdqcx8Cz6m+pjgyJ2o9Jy5dn426VXg/kzkUXpl6u5jaPZ SmKoo9Xu1r7xqTaUc9kk8pJI5Xt9vD5oQjF2KQuPZXxNidiwW6k2OGbW+wF26nEi Q6pfDu3pvHAd/UE6cD5yFe97o3Cc2XfGwI/Sv2k99UVPvNcvfAvVo9fsItHBhCPn zHkihW2S0zmbBlhcrB+PrLclNgLleP9JukFN+5scc0a9lbQxIm6v2TNKGlBfDQtO I+Kn266oqT4BEgnQGlCQquINnQAdmS8VMnnunGOu6+rwPUtkI7E= =XLHS -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Alexei Starovoitov: - Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay Mohan, Mark Rutland, Maxwell Bland) - Disallow tail calls between BPF programs that use different cgroup local storage maps to prevent out-of-bounds access (Daniel Borkmann) - Fix unaligned access in flow_dissector and netfilter BPF programs (Paul Chaignon) - Avoid possible use of uninitialized mod_len in libbpf (Achill Gilgenast) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Test for unaligned flow_dissector ctx access bpf: Improve ctx access verifier error message bpf: Check netfilter ctx accesses are aligned bpf: Check flow_dissector ctx accesses are aligned arm64/cfi,bpf: Support kCFI + BPF on arm64 cfi: Move BPF CFI types and helpers to generic code cfi: add C CFI type macro libbpf: Avoid possible use of uninitialized mod_len bpf: Fix oob access in cgroup local storage bpf: Move cgroup iterator helpers to bpf.h bpf: Move bpf map owner out of common struct bpf: Add cookie object to bpf maps |
||
|
Linus Torvalds
|
f4f346c346 |
[GIT PULL] perf tools changes for v6.17
Build-ID processing goodies
---------------------------
Build-IDs are content based hashes to link regions of memory to ELF files
in post processing. They have been available in distros for quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable backing
storage at time they are being put in place and send it as metadata at
that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post processes
the samples to find binaries touched by any samples and to save them with
build-ID. It can skip reading build-ID in userspace if it comes from the
kernel.
perf record
-----------
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat
---------
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
Performance counter stats for 'system wide':
48,137,316,988,873 ns drm-engine-render
34,452,696,746 ns drm-engine-video
20 capacity drm-engine-capacity-video
1.002086194 seconds time elapsed
perf list
---------
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace
-----------
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
$ sudo perf ftrace latency -ab -e i915_request_wait_begin,i915_request_wait_end --hide-empty -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
$ sudo perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
...
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
...
misc
----
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash.
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaIz8IAAKCRCMstVUGiXM
g4huAP9WDTZIT9E0gx4yLJ0slyBV/5ROaUWX8OUVO3JJ/1sEUgEAp3wsSmDYc1/o
XTvqNNjxo1LG+bEmZk8yNAJ2FYghPgw=
=6enW
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build-ID processing goodies:
Build-IDs are content based hashes to link regions of memory to ELF
files in post processing. They have been available in distros for
quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable
backing storage at time they are being put in place and send it as
metadata at that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post
processes the samples to find binaries touched by any samples and
to save them with build-ID. It can skip reading build-ID in
userspace if it comes from the kernel.
perf record:
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat:
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
Performance counter stats for 'system wide':
48,137,316,988,873 ns drm-engine-render
34,452,696,746 ns drm-engine-video
20 capacity drm-engine-capacity-video
1.002086194 seconds time elapsed
perf list
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace:
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
$ sudo perf ftrace latency -ab -e i915_request_wait_begin,i915_request_wait_end --hide-empty -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
$ sudo perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
...
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
...
Misc:
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash"
* tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
perf record: Cache build-ID of hit DSOs only
perf test: Ensure lock contention using pipe mode
perf python: Stop using deprecated PyUnicode_AsString()
perf list: Skip ABI PMUs when printing pmu values
perf list: Remove tracepoint printing code
perf tp_pmu: Add event APIs
perf tp_pmu: Factor existing tracepoint logic to new file
perf parse-events: Remove non-json software events
perf jevents: Add common software event json
perf tools: Remove libtraceevent in .gitignore
perf test: Fix comment ordering
perf sort: Use perf_env to set arch sort keys and header
perf test: Move PERF_SAMPLE_WEIGHT_STRUCT parsing to common test
perf sample: Remove arch notion of sample parsing
perf env: Remove global perf_env
perf trace: Avoid global perf_env with evsel__env
perf auxtrace: Pass perf_env from session through to mmap read
perf machine: Explicitly pass in host perf_env
perf bench synthesize: Avoid use of global perf_env
perf top: Make perf_env locally scoped
...
|
||
|
Linus Torvalds
|
d41e5839d8 |
cxl for v6.17
- Add documentation template for CXL conventions to document CXL platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and improve
readability
- Add return for the dummy version of cxl_decoder_detach() without CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix
-----BEGIN PGP SIGNATURE-----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=79ot
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
|
||
|
Paul Chaignon
|
d8d2d9d12f |
selftests/bpf: Test for unaligned flow_dissector ctx access
This patch adds tests for two context fields where unaligned accesses were not properly rejected. Note the new macro is similar to the existing narrow_load macro, but we need a different description and access offset. Combining the two macros into one is probably doable but I don't think it would help readability. vmlinux.h is included in place of bpf.h so we have the definition of struct bpf_nf_ctx. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/bf014046ddcf41677fb8b98d150c14027e9fddba.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eric Dumazet
|
7cbd49795d |
selftests: avoid using ifconfig
ifconfig is deprecated and not always present, use ip command instead.
Fixes:
|
||
|
Linus Torvalds
|
0bd0a41a51 |
pci-v6.17-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmiL3OkUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vz9bhAAqiD9REYlNUgGX/bEBgCVPFdtjjTz
FpSLzG23vWd2J0FEy04qtQWH9j71IXnM+yMybzsMe9SsPt2HhczzSCIMpPj0FZNN
ccOf3gA/KqPux7FORrS3mpM8OO4ICt3XZhCji3nNg5iW5XlH+NrQKPVxRlvBB0rP
+7RxSjDClUdZ97QSSmp1uZ7Qh1qyV0Ht0qjPMwecrnB2kApt4ZaMphAaKPEjX/4f
RgZPFqbIpRWt9e87Z8ADr5c2jokZAzIV0zauQ2fhbjBkTcXIXL3yOzUbR+ngBWDD
oq21rXJBUCQheA7J6j2SKabgF9AZaI5NI9ERld5vJ1inXSZCyuyKopN1AzuKZquG
N+jyYJqZC99ePvMLbTWs/spU58J03A6TOwaJNE3ISRgbnxFkhvLl7h68XuTDonZm
hYGloXXUj+i+rh7/eJIDDWa9MTpEvl2p1zc6EDIZ/umlnHwg9rGlGQVARMCs6Ist
EiJQEtjMMlXiBJMkFhpxesOdyonGkxAL9WtT6MoEOFF7dqgsTqSKiDUPa+6MHV+I
tsTB630J3ROsWGfQD1uJI2BrCm+op4j6faamH6UMqCrUU0TUZMHiRR3qVWbM6qgU
/WL1gZ96uy5I7UoE0+gH+wMhMClO2BnsxffocToDE5wOYpGDd5BwPEoY8ej8U2lu
CBMCkMor1jDtS8Y=
=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
||
|
Ido Schimmel
|
f8fded7536 |
selftests: net: Fix flaky neighbor garbage collection test
The purpose of the "Periodic garbage collection" test case is to make
sure that "extern_valid" neighbors are not flushed during periodic
garbage collection, unlike regular neighbor entries.
The test case is currently doing the following:
1. Changing the base reachable time to 10 seconds so that periodic
garbage collection will run every 5 seconds.
2. Changing the garbage collection stale time to 5 seconds so that
neighbors that have not been used in the last 5 seconds will be
considered for removal.
3. Waiting for the base reachable time change to take effect.
4. Adding an "extern_valid" neighbor, a non-"extern_valid" neighbor and
a bunch of other neighbors so that the threshold ("thresh1") will be
crossed and stale neighbors will be flushed during garbage
collection.
5. Waiting for 10 seconds to give garbage collection a chance to run.
6. Checking that the "extern_valid" neighbor was not flushed and that
the non-"extern_valid" neighbor was flushed.
The test sometimes fails in the netdev CI because the non-"extern_valid"
neighbor was not flushed. I am unable to reproduce this locally, but my
theory that since we do not know exactly when the periodic garbage
collection runs, it is possible for it to run at a time when the
non-"extern_valid" neighbor is still not considered stale.
Fix by moving the addition of the two neighbors before step 3 and by
reducing the garbage collection stale time to 1 second, to ensure that
both neighbors are considered stale when garbage collection runs.
Fixes:
|
||
|
Linus Torvalds
|
7a64bdfaf3 |
sound updates #2 for 6.17-rc1
For catching up the remaining stuff for 6.17: only small updates
and the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations
can be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix
-----BEGIN PGP SIGNATURE-----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=Q+iZ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
||
|
Linus Torvalds
|
5172a77724 |
tracing tools changes for 6.17:
- Introduce enum timerlat_tracing_mode
Now that BPF based sampling has been added to timerlat, add an enum to
represent which mode timerlat is running in.
- Add action on timelat threshold feature
A new option, --on-threshold, is added, taking an argument
that further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename.
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process.
- shell,command=<command>: Execute shell command.
- Allow resuming tracing in timerlat bpf
rtla-timerlat BPF program uses a global variable stored in a .bss section to
store whether tracing has been stopped. Map it to allow it to resume tracing
after it has been stopped.
- Add continue action to timerlat
Introduce option to resume tracing after a latency threshold overflow. The
option is implemented as an action named "continue".
- Add action on end feature to timerlat
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being executed
whenever a latency threshold is reached, it is executed at the end of the
measurement.
- Have rtla tests check output with grep
Add argument to the check command in the test suite that takes a regular
expression that the output of rtla command is checked against. This allows
testing for specific information in rtla output in addition to checking the
return value.
- Add tests for timerlat actions
- Update the documentation for the new features
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIuAtBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qk1uAQCzkGc7IUqp8038HU0aZoOwSxS04ma3
NvrF0Vuw8wvVqgD+Pogi1M7fr3LyXHzW4k3Vx7Ot3YSy52T6aCohjcKQ0wo=
=P46B
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Introduce enum timerlat_tracing_mode
Now that BPF based sampling has been added to timerlat, add an enum
to represent which mode timerlat is running in
- Add action on timelat threshold feature
A new option, --on-threshold, is added, taking an argument that
further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process
- shell,command=<command>: Execute shell command
- Allow resuming tracing in timerlat bpf
rtla-timerlat BPF program uses a global variable stored in a .bss
section to store whether tracing has been stopped. Map it to allow it
to resume tracing after it has been stopped
- Add continue action to timerlat
Introduce option to resume tracing after a latency threshold
overflow. The option is implemented as an action named "continue"
- Add action on end feature to timerlat
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at
the end of the measurement
- Have rtla tests check output with grep
Add argument to the check command in the test suite that takes a
regular expression that the output of rtla command is checked
against. This allows testing for specific information in rtla output
in addition to checking the return value
- Add tests for timerlat actions
- Update the documentation for the new features
* tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/tests: Test timerlat -P option using actions
rtla/tests: Add grep checks for base test cases
Documentation/rtla: Add actions feature
rtla/tests: Limit duration to maximum of 10s
rtla/tests: Add tests for actions
rtla/tests: Check rtla output with grep
rtla/timerlat: Add action on end feature
rtla/timerlat: Add continue action
rtla/timerlat_bpf: Allow resuming tracing
rtla/timerlat: Add action on threshold feature
rtla/timerlat: Introduce enum timerlat_tracing_mode
|
||
|
Linus Torvalds
|
b80a75cf69 |
hid-for-linus-2025073101
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmiL2DAACgkQpmLzj2vt YEk9aRAApXAYs/LNZ6hS2FvqxSKJhThLEm4sib6CvdQ82Er92aqrZEutkpb8Rq0/ KMPLYTv9QsZgFKilZJnxIRwZRpy37C7SGO8Y3PSARpakxpCPe76RyqcY+DghrB9+ kBRUzfDq9JR8RM8lcxw5dgEjgI3cz/5gS8OFh/LOVqe2nqub3U3Dr2kQkDE3DSiG BqIPhIG//TW0al6IxJQVL59egzVqzzqcgK/efBwT7WjToaCjXuZTClDiKASVLcmW p/xvsPjIBeVuEdOTfboiHowOs3RyXa3zWlHS76/x9JXVDPOrPcleJyoxEedU4BBG selhkdVEYcCOYMlzz7/p1BrIkkpczWfye5rSGQ05qmOeApMAxicKRp0DfTLm0EGa bdmDLIncSBRBb5iATrRS+rQcV6PSzLCaB9+rGiWS/EQPFCKh54SZSNvl5rw0WCHY +b9zmxmr2KG7B8eQQXx0/x6RNCC3gANqkVO4+TXamcGhJaoW2M0+xT9tzid0sL+S Y7t5C8T4KoI4dc2be76KNs/LlR6F5LK1E0HTkapdG+ZoiLc/PsqK0pnGc0aXd+/z Ee246MZEMsURgOEA68dEm4XBdh2xp9xVZIsZtaWcfSSQZJnfpx89v9Tl4MUlfqzj 8BPLeYxxg9gxfxpGcP+oGMjXbeKDjSbmRJroOP4jw/WdPZ2rs0s= =kYcB -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2025073101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - hardening of HID core parser against conversion to 0 bits in s32ton() by buggy/malicious devices (Alan Stern) - fix for potential NULL pointer dereference in hid-apple that could be caused by malicious device with APPLE_MAGIC_BACKLIGHT quirk present triggering overflow in data field (Qasim Ijaz) - support for Wake-on-touch in intel-thc (Even Xu) - support for "Input max input size control" and "Input interrupt delay" I2C features in order to improve compatibility of THC devices with legacy HIDI2C touch devices (Even Xu) - support for Touch Bars on x86 MacBook Pros (Kerem Karabay) - support for XP-PEN Artist 22R Pro (Joshua Goins) - third party trackpart support for MacBookPro15,1 (Aditya Garg) - Apple Magic Keyboard A311[89] USB-C support (Aditya Garg, Grigorii Sokoli) - support for operating modes in amd-sfh (Basavaraj Natikar) - avoid setting up battery timer for Apple and Magicmouse devices without battery (Aditya Garg) - fix for behavior of the hid-mcp2221 driver for !CONFIG_IIO cases (Heiko Schocher) - other assorted fixups and device ID additions * tag 'hid-for-linus-2025073101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits) HID: core: Harden s32ton() against conversion to 0 bits HID: apple: validate feature-report field count to prevent NULL pointer dereference HID: core: Improve the kerneldoc for hid_report_len() selftests/hid: sync python tests to hid-tools 0.10 selftests/hid: sync the python tests to hid-tools 0.8 selftests/hid: run ruff format on the python part HID: magicmouse: use secs_to_jiffies() for battery timeout HID: apple: use secs_to_jiffies() for battery timeout HID: magicmouse: avoid setting up battery timer when not needed HID: apple: avoid setting up battery timer for devices without battery HID: amd_sfh: Enable operating mode HID: uclogic: Add support for XP-PEN Artist 22R Pro HID: rate-limit hid_warn to prevent log flooding HID: replace scnprintf() with sysfs_emit() HID: uclogic: make read-only array reconnect_event static const HID: mcp-2221: Replace manual comparison with min() macro HID: intel-thc-hid: Separate max input size control conditional list HID: mcp2221: set gpio pin mode HID: multitouch: add device ID for Apple Touch Bar HID: multitouch: specify that Apple Touch Bar is direct ... |
||
|
Linus Torvalds
|
6a68cec16b |
sched_ext: Changes for v6.17
- Add support for cgroup "cpu.max" interface. - Code organization cleanup so that ext_idle.c doesn't depend on the source-file-inclusion build method of sched/. - Drop UP paths in accordance with sched core changes. - Documentation and other misc changes. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaIqnxg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGUh5AQC6YM7ggRPYRmy28m5B0nubpKtCHqPOAHSd/QbY MCiThgD+JuE9ewg3wYO/jvJx3NyIRB1McMnAaG59hf6R0Plh5Qo= =TeLF -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Add support for cgroup "cpu.max" interface - Code organization cleanup so that ext_idle.c doesn't depend on the source-file-inclusion build method of sched/ - Drop UP paths in accordance with sched core changes - Documentation and other misc changes * tag 'sched_ext-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Fix scx_bpf_reenqueue_local() reference sched_ext: Drop kfuncs marked for removal in 6.15 sched_ext, rcu: Eject BPF scheduler on RCU CPU stall panic kernel/sched/ext.c: fix typo "occured" -> "occurred" in comments sched_ext: Add support for cgroup bandwidth control interface sched_ext, sched/core: Factor out struct scx_task_group sched_ext: Return NULL in llc_span sched_ext: Always use SMP versions in kernel/sched/ext_idle.h sched_ext: Always use SMP versions in kernel/sched/ext_idle.c sched_ext: Always use SMP versions in kernel/sched/ext.h sched_ext: Always use SMP versions in kernel/sched/ext.c sched_ext: Documentation: Clarify time slice handling in task lifecycle sched_ext: Make scx_locked_rq() inline sched_ext: Make scx_rq_bypassing() inline sched_ext: idle: Make local functions static in ext_idle.c sched_ext: idle: Remove unnecessary ifdef in scx_bpf_cpu_node() |