mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-28 18:10:32 +00:00
loongarch-next
6776 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e1d8f9ccb2 |
tracing fixes for v6.17-rc2:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
|
||
|
Steven Rostedt
|
bfb336cf97 |
ftrace: Also allocate and copy hash for reading of filter files
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes:
|
||
|
Tengda Wu
|
4013aef2ce |
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes:
|
||
|
Steven Rostedt
|
e3d01979e4 |
fgraph: Copy args in intermediate storage with entry
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes:
|
||
|
Masami Hiramatsu (Google)
|
ec879e1a0b |
tracing: fprobe-event: Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes:
|
||
|
Ye Weihua
|
edede7a6dc |
trace/fgraph: Fix the warning caused by missing unregister notifier
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes:
|
||
|
Liao Yuanhong
|
cd6e4faba9 |
ring-buffer: Remove redundant semicolons
Remove unnecessary semicolons. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250813095114.559530-1-liaoyuanhong@vivo.com Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Pu Lehui
|
6a909ea83f |
tracing: Limit access to parser->buffer when trace_get_user failed
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes:
|
||
|
Linus Torvalds
|
e991acf1bc |
Significant patch series in this pull request:
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
||
|
Linus Torvalds
|
3c4a063b1f |
tracing cleanups for v6.17:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using guard()
and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6 argument
registers and then use BTF to format them for human consumption when the
trace file is read. There's several arguments that are "unsigned long" and
even "unsigned int" that are either and address or a mask. It is easier to
understand if they were printed using hexadecimal instead of decimal.
The old method just printed all non-pointer values as signed integers,
which made it even worse for unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaI9pOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkhoAQD+moa8M+WWUS9T9utwREytolfyNKEO
dW0dPVzquX3L6gEAnc7zNla4QZJsdU1bHyhpDTn/Zhu11aMrzoxcBcdrSwI=
=x79z
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer
is already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard()
for these functions so that their use cases can be simplified and not
need to use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using
guard() and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6
argument registers and then use BTF to format them for human
consumption when the trace file is read. There are several arguments
that are "unsigned long" and even "unsigned int" that are either and
address or a mask. It is easier to understand if they were printed
using hexadecimal instead of decimal. The old method just printed all
non-pointer values as signed integers, which made it even worse for
unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs"
* tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have unsigned int function args displayed as hexadecimal
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
tracing: Use __free(kfree) in trace.c to remove gotos
tracing: Add guard() around locks and mutexes in trace.c
tracing: Add guard(ring_buffer_nest)
tracing: Remove unneeded goto out logic
|
||
|
Linus Torvalds
|
8877fcb70f |
This is a small set of changes for modules, primarily to extend module users
to use the module data structures in combination with the already no-op stub module functions, even when support for modules is disabled in the kernel configuration. This change follows the kernel's coding style for conditional compilation and allows kunit code to drop all CONFIG_MODULES ifdefs, which is also part of the changes. This should allow others part of the kernel to do the same cleanup. Note that this had a conflict with sysctl changes [1] but should be fixed now as I rebased on top. The remaining changes include a fix for module name length handling which could potentially lead to the removal of an incorrect module, and various cleanups. The module name fix and related cleanup has been in linux-next since Thursday (July 31) while the rest of the changes for a bit more than 3 weeks. Note that this currently has conflicts in next with kbuild's tree [2]. Link: https://lore.kernel.org/all/20250714175916.774e6d79@canb.auug.org.au/ [1] Link: https://lore.kernel.org/all/20250801132941.6815d93d@canb.auug.org.au/ [2] -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE73Ua4R8Pc+G5xjxTQJ6jxB8ZUfsFAmiPQgkACgkQQJ6jxB8Z UfuPTA//XrRguJFBhQh6cUWqVleTNQJuhjiPsOSO5S52aVET4wsrnRNeM2eM5oqw 0+6ELvhIJINQ1LjpOP8D67d8P5Ds1/qM1pbQIkQsoKiEj6E7Q4dXH5N0uyf/BzO3 HaosLG9cpqcomlSorYEiYoPjqy9EChQzsi+YAYWAB+fW6bvU/AdUHTRH88m3ppBJ Y22BTTPOKKyj5/QgfY+kwH8TTnrzCzY8aoOqW7uimLI5h4c9dFQ2PigRJnoMfDG1 11w5VshOTzZJvNFrUk5GVSirwlxdJDbW6dKfG0DD5+eNWK5dfIEc+/EcuhaGoPvO Euwv8VQubdxHTAG6kzHI0MtxAVQUM1gyz8zHiu18eW++GTtnTFs6m8E6H9AC176G nDkUh3qSxJN2HHgxtS9VUExEEZpYqtWeB9Zts8K3oSWvTaQenHWpVHPADkxzS4JU Jvkjq8SiKo+RqHxaOKfyf1RfOtYe5tjMCLrP7zX39d1+cwGxuc6mip/omY9HFDgn op132fYdt24JSHoioJDzRz9mTfvj3nICEmgX4D4WDQx5lP27CUcLugPnBNHPp0fu 5hL+ajy8M8nq4zm/42Y+F7VS74TIA6mSnJKs9dMCknUWueD6HrDEU9xHi1YMpUMZ cBUSpU+P94dCIScwEzkp926vDnHyxCHLbpF1Jsq5qNNdj7AelHk= =4bGB -----END PGP SIGNATURE----- Merge tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux Pull module updates from Daniel Gomez: "This is a small set of changes for modules, primarily to extend module users to use the module data structures in combination with the already no-op stub module functions, even when support for modules is disabled in the kernel configuration. This change follows the kernel's coding style for conditional compilation and allows kunit code to drop all CONFIG_MODULES ifdefs, which is also part of the changes. This should allow others part of the kernel to do the same cleanup. The remaining changes include a fix for module name length handling which could potentially lead to the removal of an incorrect module, and various cleanups" * tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN module: Restore the moduleparam prefix length check module: Remove unnecessary +1 from last_unloaded_module::name size module: Prevent silent truncation of module name in delete_module(2) kunit: test: Drop CONFIG_MODULE ifdeffery module: make structure definitions always visible module: move 'struct module_use' to internal.h |
||
|
Steven Rostedt
|
3ca824369b |
tracing: Have unsigned int function args displayed as hexadecimal
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Show up in the trace as:
__create_object(ptr=-131387050520576, size=4096, min_count=1, gfp=3264, objflags=0) <-kmem_cache_alloc_noprof
stack_access_ok(state=0xffffc9000233fc98, _addr=-60473102566256, len=8) <-unwind_next_frame
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Instead, by displaying unsigned as hexadecimal, they look more like this:
__create_object(ptr=0xffff8881028d2080, size=0x280, min_count=1, gfp=0x82820, objflags=0x0) <-kmem_cache_alloc_node_noprof
stack_access_ok(state=0xffffc90000003938, _addr=0xffffc90000003930, len=0x8) <-unwind_next_frame
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Changes since v2: https://lore.kernel.org/20250801111453.01502861@gandalf.local.home
- Use btf_int_encoding() instead of open coding it (Martin KaFai Lau)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/20250801165601.7770d65c@gandalf.local.home
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt
|
db5f0c3e3e |
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
The function ring_buffer_write() has a goto out to only do a preempt_enable_notrace(). This can be replaced by a guard. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.205479143@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
12d5189615 |
tracing: Use __free(kfree) in trace.c to remove gotos
There's a couple of locations that have goto out in trace.c for the only purpose of freeing a variable that was allocated. These can be replaced with __free(kfree). Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.040892777@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
debe57fbe1 |
tracing: Add guard() around locks and mutexes in trace.c
There's several locations in trace.c that can be simplified by using guards around raw_spin_lock_irqsave, mutexes and preempt disabling. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.879085376@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
788fa4b47c |
tracing: Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is already being written to by the same context (for example, a trace_printk() in between a ring_buffer_lock_reserve() and a ring_buffer_unlock_commit()). In order to not trigger the recursion detection, these functions use ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for these functions so that their use cases can be simplified and not need to use goto for the release. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.710501021@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
c89504a703 |
tracing: Remove unneeded goto out logic
Several places in the trace.c file there's a goto out where the out is simply a return. There's no reason to jump to the out label if it's not doing any more logic but simply returning from the function. Replace the goto outs with a return and remove the out labels. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.538726745@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
d6f38c1239 |
tracing changes for 6.17
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen in two
different locations has lead to various issues and inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for this
single user.
It's been over 10 years. Tooling and scripts should start replacing the
debugfs location with the tracefs one. The reason tracefs was created in the
first place was to allow access to the tracing facilities without the need
to configure debugfs into the kernel. Using tracefs should now be more
robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED
which is default y, so that the kernel is still built with the automount.
This config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the following
printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number of
events within an event system. Freeing them from softirq context can
potentially cause undesired latency. Use the RCU workqueue to free them
instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time ago with
the idea of "making them visible", but that's not what memory barriers are
for. They are to synchronize access between different variables. There was
no synchronization here making them pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y and
PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with the
following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another probe was
enabled (kprobe, fprobe, uprobe, etc). The eprobes had no config option
of their own. Add one as they should be a separate entity.
It's default y to keep with the old kernels but still has dependencies on
TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to describe
them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment above
pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling of
trace events was first introduced. But there was a bug with this approach
as it only worked for a single instance. When multiple users required soft
disabling and disabling the code was changed to have a ref count. The
SOFT_MODE flag is now set iff the ref count is non zero. This is redundant
and just reading the ref count is good enough.
- Fix typo in comment
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIt5ZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvriAPsEbOEgMrPF1Tdj1mHLVajYTxI8ft5J
aX5bfM2cDDRVcgEA57JHOXp4d05dj555/hgAUuCWuFp/E0Anp45EnFTedgQ=
=wKZW
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
|
||
|
Petr Pavlu
|
a7c54b2b41
|
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
Use the MODULE_NAME_LEN definition in module_exists() to obtain the maximum
size of a module name, instead of using MAX_PARAM_PREFIX_LEN. The values
are the same but MODULE_NAME_LEN is more appropriate in this context.
MAX_PARAM_PREFIX_LEN was added in commit
|
||
|
Linus Torvalds
|
2be6a7503d |
Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they are
unused. Changes are being made to detect when a tracepoint is defined but
unused and a warning is shown at build. But those changes are not yet
ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config settings
to match the config settings of where they are instantiated. Some
tracepoints were moved into architecture specific code as only one
architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if statement
The ftrace_test_filter tracepoint which is defined when ftrace selftests
are configured and is used to test the filter logic, but the tracepoint is
not actually called. It is put into an if statement to not have it get
compiled out, but also not warn for not being used.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIlYqxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qisrAQD+pu2en9LAXLcgbFxQOwhbACpxOpmT
3LiE2+MvDR3ckQD/Vyi31XebdRmj3leJ7ENf28oa155y1pyK/onrPgDHyQ4=
=nFfn
-----END PGP SIGNATURE-----
Merge tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
|
||
|
Linus Torvalds
|
4ff261e725 |
Runtime verification changes for 6.17
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page faults, or
may be blocked trying to take a mutex without priority inheritance.
However, while attempting to implement DA monitors for these real-time
rules, deterministic automaton is found to be inappropriate as the
specification language. The automaton is complicated, hard to understand,
and error-prone.
For these cases, linear temporal logic is found to be more suitable. The
LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them visible for
the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with real-time
applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling preemption
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIk8cBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qi3DAQCFu6DM7uPSh94oggWlH2LukOYVGk2b
CvGrqMFuefae7QD/aK9nCMfzaBehixMOMQHLHELEh527Hd+RwQCrlnLALQU=
=r5HZ
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verification updates from Steven Rostedt:
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page
faults, or may be blocked trying to take a mutex without priority
inheritance.
However, while attempting to implement DA monitors for these
real-time rules, deterministic automaton is found to be inappropriate
as the specification language. The automaton is complicated, hard to
understand, and error-prone.
For these cases, linear temporal logic is found to be more suitable.
The LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them
visible for the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with
real-time applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on
risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling
preemption"
* tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (48 commits)
rv: Add opid per-cpu monitor
rv: Add nrp and sssw per-task monitors
rv: Replace tss and sncid monitors with more complete sts
sched: Adapt sched tracepoints for RV task model
rv: Retry when da monitor detects race conditions
rv: Adjust monitor dependencies
rv: Use strings in da monitors tracepoints
rv: Remove trailing whitespace from tracepoint string
rv: Add da_handle_start_run_event_ to per-task monitors
rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
rv: Fix wrong type cast in monitors_show()
rv: Remove struct rv_monitor::reacting
rv: Remove rv_reactor's reference counter
rv: Merge struct rv_reactor_def into struct rv_reactor
rv: Merge struct rv_monitor_def into struct rv_monitor
rv: Remove unused field in struct rv_monitor_def
rv: Return init error when registering monitors
verification/rvgen: Organise Kconfig entries for nested monitors
tools/dot2c: Fix generated files going over 100 column limit
tools/rv: Stop gracefully also on SIGTERM
...
|
||
|
Linus Torvalds
|
d50b07d05c |
ring-buffer changes for v6.17:
- Rewind persistent ring buffer on boot When the persistent ring buffer is being used for live kernel tracing and the system crashes, the tool that is reading the trace may not have recorded the data when the system crashed. Although the persistent ring buffer still has that data, when reading it after a reboot, it will start where it left off. That is, what was read will not be accessible. Instead, on reboot, have the persistent ring buffer restart where the data starts and this will allow the tooling to recover what was lost when the crash occurred. - Remove the ring_buffer_read_prepare_sync() logic Reading the trace file required stopping writing to the ring buffer as the trace file is only an iterator and does not consume what it read. It was originally not safe to read the ring buffer in this mode and required disabling writing. The ring_buffer_read_prepare_sync() logic was used to stop each per_cpu ring buffer, call synchronize_rcu() and then start the iterator. This was used instead of calling synchronize_rcu() for each per_cpu buffer. Today, the iterator has been updated where it is safe to read the trace file while writing to the ring buffer is still occurring. There is no more need to do this synchronization and it is causing large delays on machines with many CPUs. Remove this unneeded synchronization. - Make static string array a constant in show_irq_str() Making the string array into a constant has shown to decrease code text/data size. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkfURQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnx4AQCNXOuKYJXDvXrkwf449agwrn0lCVyI vV0L65nyIrakpAD8COV/lw8DhlCpb/Lijlzzo5L0n9QpEElNpq5uEntNwgE= =1YIy -----END PGP SIGNATURE----- Merge tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ring-buffer updates from Steven Rostedt: - Rewind persistent ring buffer on boot When the persistent ring buffer is being used for live kernel tracing and the system crashes, the tool that is reading the trace may not have recorded the data when the system crashed. Although the persistent ring buffer still has that data, when reading it after a reboot, it will start where it left off. That is, what was read will not be accessible. Instead, on reboot, have the persistent ring buffer restart where the data starts and this will allow the tooling to recover what was lost when the crash occurred. - Remove the ring_buffer_read_prepare_sync() logic Reading the trace file required stopping writing to the ring buffer as the trace file is only an iterator and does not consume what it read. It was originally not safe to read the ring buffer in this mode and required disabling writing. The ring_buffer_read_prepare_sync() logic was used to stop each per_cpu ring buffer, call synchronize_rcu() and then start the iterator. This was used instead of calling synchronize_rcu() for each per_cpu buffer. Today, the iterator has been updated where it is safe to read the trace file while writing to the ring buffer is still occurring. There is no more need to do this synchronization and it is causing large delays on machines with many CPUs. Remove this unneeded synchronization. - Make static string array a constant in show_irq_str() Making the string array into a constant has shown to decrease code text/data size. * tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Make the const read-only 'type' static ring-buffer: Remove ring_buffer_read_prepare_sync() tracing: ring_buffer: Rewind persistent ring buffer on reboot |
||
|
Linus Torvalds
|
90a871f74b |
ftrace changes for v6.17:
- Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkVkRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmdxAPsGcyT/gnyX/wf70cI63QoODrlRAd7M tg3R0J0H41U05QD/apttbA9GSdZ8bDLLSFAXTJgr8f4GvYvbUsmu2sMBBA8= =gd9V -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. * tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it fgraph: Keep track of when fgraph_ops are registered or not fgraph: Make pid_str size match the comment |
||
|
Linus Torvalds
|
b7dbc2e813 |
Probes updates for v6.17:
- Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow.
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow.
- Fix a typo in the above commit.
- New features for eprobe and tprobe events:
- Add support for arrays in eprobes.
- Support multiple tprobes on the same tracepoint.
- Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead.
- Register tracepoints for tprobe events only when enabled to
resolve a lock dependency.
- Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and __get_insn_slot().
- Sort #include alphabetically in the probes code.
- Remove the unused 'mod' field from the tprobe-event.
- Clean up the entry-arg storing code in probe-events.
- Selftest update
- Enable fprobe events before checking enable_functions in selftests.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmiJ2DQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bSfkH/06Zn5I55rU85FKSBQll
FN4hipmef/9Nd13skDwpEuFyzLPNS4P1up/UBUuyDQUTlO74+t2zSFO2dpcNrWmu
sPTenQ+6h82H3K591WTIC23VzF54syIbFLXEj8iMBALT3wyU4Nn0bs4DCbnTo5HX
R3NVo77rk6wxNJoKYOtT6ALf/lHonuNlGF+KTUGWP8UbWsIY3fIp0RWWy572M0bt
+YBE8D8RIVrw+ZY+vNKn1LdZdWlR1ton518XDf1gV9isTCfKErcd/6HJKwuj5q2v
qMgwiaKK+Gne/ylAKmWLEg2oNDo7kpyfW+612oiECitgZkqxOXhyYYfWgRt1lFNp
Wb8=
=E+Z6
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
|
||
|
Linus Torvalds
|
a03eec7420 |
Probes fixes for v6.16:
- Fix a potential infinite recursion in fprobe by using preempt_*_notrace(). -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmiIdp4bHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8boY8IAMQGLspd1mATbCfnrQKY 2X86OVygOJx7Iq1RCmOV6fhroe5EoNVR/b1RXmZJf2gIoN176zdBdYrBIFC97lYO J1XaU/Ns1McBuKrOjc3TSYYioVPHJrKLiZ1vAoCicTkUsS34MQJXbbAlfdn424pb J1wUeIDJF0WrFH9yVJ4mEs1dH81oCQ3iSG0CYx5/qLggcoubUFrVl4QessJwAuI6 VM+cKDsqMCltBovXFw/fAgWfiQp79z/uq9umOFLdZGsesqutMYTMgJXBS6slKl3a qE2EQ57Op39A2zpk2hUoVoyv5Ey/XkfEjLU7WIMfqjLOL201IGQEKuyvR/mS54Kc HDw= =EeVm -----END PGP SIGNATURE----- Merge tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fix from Masami Hiramatsu: - Fix a potential infinite recursion in fprobe by using preempt_*_notrace() * tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: fprobe: Fix infinite recursion using preempt_*_notrace() |
||
|
Linus Torvalds
|
d9104cec3e |
bpf-next-6.17
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiINnEACgkQ6rmadz2v bToBnA/9F+A3R6rTwGk4HK3xpfc/nm2Tanl3oRN7S2ub/mskDOtWSIyG6cVFZ0UG 1fK6IkByyRIpAF/5qhdlw8drRXHkQtGLA0lP2L9llm4X1mHLofB18y9OeLrDE1WN KwNP06+IGX9W802lCGSIXOY+VmRscVfXSMokyQt2ilHplKjOnDqJcYkWupi3T2rC mz79FY9aEl2YrIcpj9RXz+8nwP49pZBuW2P0IM5PAIj4BJBXShrUp8T1nz94okNe NFsnAyRxjWpUT0McEgtA9WvpD9lZqujYD8Qp0KlGZWmI3vNpV5d9S1+dBcEb1n7q dyNMkTF3oRrJhhg4VqoHc6fVpzSEoZ9ZxV5Hx4cs+ganH75D4YbdGqx/7mR3DUgH MZh6rHF1pGnK7TAm7h5gl3ZRAOkZOaahbe1i01NKo9CEe5fSh3AqMyzJYoyGHRKi xDN39eQdWBNA+hm1VkbK2Bv93Rbjrka2Kj+D3sSSO9Bo/u3ntcknr7LW39idKz62 Q8dkKHcCEtun7gjk0YXPF013y81nEohj1C+52BmJ2l5JitM57xfr6YOaQpu7DPDE AJbHx6ASxKdyEETecd0b+cXUPQ349zmRXy0+CDMAGKpBicC0H0mHhL14cwOY1Hfu EIpIjmIJGI3JNF6T5kybcQGSBOYebdV0FFgwSllzPvuYt7YsHCs= =/O3j -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Remove usermode driver (UMD) framework (Thomas Weißschuh) - Introduce Strongly Connected Component (SCC) in the verifier to detect loops and refine register liveness (Eduard Zingerman) - Allow 'void *' cast using bpf_rdonly_cast() and corresponding '__arg_untrusted' for global function parameters (Eduard Zingerman) - Improve precision for BPF_ADD and BPF_SUB operations in the verifier (Harishankar Vishwanathan) - Teach the verifier that constant pointer to a map cannot be NULL (Ihor Solodrai) - Introduce BPF streams for error reporting of various conditions detected by BPF runtime (Kumar Kartikeya Dwivedi) - Teach the verifier to insert runtime speculation barrier (lfence on x86) to mitigate speculative execution instead of rejecting the programs (Luis Gerhorst) - Various improvements for 'veristat' (Mykyta Yatsenko) - For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to improve bug detection by syzbot (Paul Chaignon) - Support BPF private stack on arm64 (Puranjay Mohan) - Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's node (Song Liu) - Introduce kfuncs for read-only string opreations (Viktor Malik) - Implement show_fdinfo() for bpf_links (Tao Chen) - Reduce verifier's stack consumption (Yonghong Song) - Implement mprog API for cgroup-bpf programs (Yonghong Song) * tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits) selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite selftests/bpf: Add selftest for attaching tracing programs to functions in deny list bpf: Add log for attaching tracing programs to functions in deny list bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions bpf: Fix various typos in verifier.c comments bpf: Add third round of bounds deduction selftests/bpf: Test invariants on JSLT crossing sign selftests/bpf: Test cross-sign 64bits range refinement selftests/bpf: Update reg_bound range refinement logic bpf: Improve bounds when s64 crosses sign boundary bpf: Simplify bounds refinement from s32 selftests/bpf: Enable private stack tests for arm64 bpf, arm64: JIT support for private stack bpf: Move bpf_jit_get_prog_name() to core.c bpf, arm64: Fix fp initialization for exception boundary umd: Remove usermode driver framework bpf/preload: Don't select USERMODE_DRIVER selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure selftests/bpf: Increase xdp data size for arm64 64K page size ... |
||
|
Steven Rostedt
|
0dd1274a05 |
tracing: Have eprobes have their own config option
Eprobes were added in 5.15 and were selected whenever any of the other probe events were selected. If kprobe events were enabled (which it is by default if kprobes are enabled) it would enable eprobe events as well. The same for uprobes and fprobes. Have eprobes have its own config and it gets enabled by default if tracing is enabled. Link: https://lore.kernel.org/all/20250729102636.b7cce553e7cc263722b12365@kernel.org/ Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/20250730140945.360286733@kernel.org Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Colin Ian King
|
6443cdf567 |
ring-buffer: Make the const read-only 'type' static
Don't populate the read-only 'type' on the stack at run time, instead make it static. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250714160858.1234719-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
1a967e92bf |
tracing: Remove "__attribute__()" from the type field of event format
With CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, `__user` is
converted to `__attribute__((btf_type_tag("user")))`. In this case,
some syscall events have it for __user data, like below;
/sys/kernel/tracing # cat events/syscalls/sys_enter_openat/format
name: sys_enter_openat
ID: 720
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int __syscall_nr; offset:8; size:4; signed:1;
field:int dfd; offset:16; size:8; signed:0;
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
field:int flags; offset:32; size:8; signed:0;
field:umode_t mode; offset:40; size:8; signed:0;
Then the trace event filter fails to set the string acceptable flag
(FILTER_PTR_STRING) to the field and rejects setting string filter;
# echo 'filename.ustring ~ "*ftracetest-dir.wbx24v*"' \
>> events/syscalls/sys_enter_openat/filter
sh: write error: Invalid argument
# cat error_log
[ 723.743637] event filter parse error: error: Expecting numeric field
Command: filename.ustring ~ "*ftracetest-dir.wbx24v*"
Since this __attribute__ makes format parsing complicated and not
needed, remove the __attribute__(.*) from the type string.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/175376583493.1688759.12333973498014733551.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Masami Hiramatsu (Google)
|
a3e892ab0f |
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
Since preempt_count_add/del() are tracable functions, it is not allowed
to use preempt_disable/enable() in ftrace handlers. Without this fix,
probing on `preempt_count_add%return` will cause an infinite recursion
of fprobes.
To fix this problem, use preempt_disable/enable_notrace() in
fprobe_return().
Link: https://lore.kernel.org/all/175374642359.1471729.1054175011228386560.stgit@mhiramat.tok.corp.google.com/
Fixes:
|
||
|
Linus Torvalds
|
6e11664f14 |
for-6.17/block-20250728
-----BEGIN PGP SIGNATURE-----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=e86T
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
||
|
Masami Hiramatsu (Google)
|
133c302a0c |
tracing: trace_fprobe: Fix typo of the semicolon
Fix a typo that uses ',' instead of ';' for line delimiter. Link: https://lore.kernel.org/linux-trace-kernel/175366879192.487099.5714468217360139639.stgit@mhiramat.tok.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Gabriele Monaco
|
614384533d |
rv: Add opid per-cpu monitor
Add a per-cpu monitor as part of the sched model:
* opid: operations with preemption and irq disabled
Monitor to ensure wakeup and need_resched occur with irq and
preemption disabled or in irq handlers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Gabriele Monaco
|
e8440a88e5 |
rv: Add nrp and sssw per-task monitors
Add 2 per-task monitors as part of the sched model:
* nrp: need-resched preempts
Monitor to ensure preemption requires need resched.
* sssw: set state sleep and wakeup
Monitor to ensure sched_set_state to sleepable leads to sleeping and
sleeping tasks require wakeup.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Gabriele Monaco
|
d0096c2f9c |
rv: Replace tss and sncid monitors with more complete sts
The tss monitor currently guarantees task switches can happen only while scheduling, whereas the sncid monitor enforces scheduling occurs with interrupt disabled. Replace the monitors with a more comprehensive specification which implies both but also ensures that: * each scheduler call disable interrupts to switch * each task switch happens with interrupts disabled Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nam Cao <namcao@linutronix.de> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/20250728135022.255578-8-gmonaco@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Gabriele Monaco
|
adcc3bfa88 |
sched: Adapt sched tracepoints for RV task model
Add the following tracepoint:
* sched_set_need_resched(tsk, cpu, tif)
Called when a task is set the need resched [lazy] flag
Remove the unused ip parameter from sched_entry and sched_exit and alter
sched_entry to have a value of preempt consistent with the one used in
sched_switch.
Also adapt all monitors using sched_{entry,exit} to avoid breaking build.
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Gabriele Monaco
|
9d475d80c9 |
rv: Retry when da monitor detects race conditions
DA monitor can be accessed from multiple cores simultaneously, this is likely, for instance when dealing with per-task monitors reacting on events that do not always occur on the CPU where the task is running. This can cause race conditions where two events change the next state and we see inconsistent values. E.g.: [62] event_srs: 27: sleepable x sched_wakeup -> running (final) [63] event_srs: 27: sleepable x sched_set_state_sleepable -> sleepable [63] error_srs: 27: event sched_switch_suspend not expected in the state running In this case the monitor fails because the event on CPU 62 wins against the one on CPU 63, although the correct state should have been sleepable, since the task get suspended. Detect if the current state was modified by using try_cmpxchg while storing the next value. If it was, try again reading the current state. After a maximum number of failed retries, react by calling a special tracepoint, print on the console and reset the monitor. Remove the functions da_monitor_curr_state() and da_monitor_set_state() as they only hide the underlying implementation in this case. Monitors where this type of condition can occur must be able to account for racing events in any possible order, as we cannot know the winner. Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/20250728135022.255578-6-gmonaco@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Gabriele Monaco
|
79de661707 |
rv: Adjust monitor dependencies
RV monitors relying on the preemptirqs tracepoints are set as dependent
on PREEMPT_TRACER and IRQSOFF_TRACER. In fact, those configurations do
enable the tracepoints but are not the minimal configurations enabling
them, which are TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS (not selectable
manually).
Set TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS as dependencies for
monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-5-gmonaco@redhat.com
Fixes:
|
||
|
Gabriele Monaco
|
7f904ff6e5 |
rv: Use strings in da monitors tracepoints
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-4-gmonaco@redhat.com
Fixes:
|
||
|
Gabriele Monaco
|
7b70ac4cad |
rv: Remove trailing whitespace from tracepoint string
RV event tracepoints print a line with the format:
"event_xyz: S0 x event -> S1 "
"event_xyz: S1 x event -> S0 (final)"
While printing an event leading to a non-final state, the line
has a trailing white space (visible above before the closing ").
Adapt the format string not to print the trailing whitespace if we are
not printing "(final)".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-3-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Nam Cao
|
3cfb9c1a7d |
rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
Argument 'p' of reactors_show() and monitor_reactor_show() is not a pointer to struct rv_reactor, it is actually a pointer to the list_head inside struct rv_reactor. Therefore it's wrong to cast 'p' to struct rv_reactor *. This wrong type cast has been there since the beginning. But it still worked because the list_head was the first field in struct rv_reactor_def. This is no longer true since commit |
||
|
Nam Cao
|
e82aea50fe |
rv: Fix wrong type cast in monitors_show()
Argument 'p' of monitors_show() is not a pointer to struct rv_monitor, it is actually a pointer to the list_head inside struct rv_monitor. Therefore it is wrong to cast 'p' to struct rv_monitor *. This wrong type cast has been there since the beginning. But it still worked because the list_head was the first field in struct rv_monitor_def. This is no longer true since commit |
||
|
Nam Cao
|
b8a7fba39c |
rv: Remove struct rv_monitor::reacting
The field 'reacting' in struct rv_monitor is set but never used. Delete it. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/a6c16f845d2f1a09c4d0934ab83f3cb14478a71d.1753378331.git.namcao@linutronix.de Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Nam Cao
|
3d3800b4f7 |
rv: Remove rv_reactor's reference counter
rv_reactor has a reference counter to ensure it is not removed while monitors are still using it. However, this is futile, as __exit functions are not expected to fail and will proceed normally despite rv_unregister_reactor() returning an error. At the moment, reactors do not support being built as modules, therefore they are never removed and the reference counters are not necessary. If we support building RV reactors as modules in the future, kernel module's centralized facilities such as try_module_get(), module_put() or MODULE_SOFTDEP should be used instead of this custom implementation. Remove this reference counter. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/bb946398436a5e17fb0f5b842ef3313c02291852.1753378331.git.namcao@linutronix.de Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Nam Cao
|
3d3c376118 |
rv: Merge struct rv_reactor_def into struct rv_reactor
Each struct rv_reactor has a unique struct rv_reactor_def associated with
it. struct rv_reactor is statically allocated, while struct rv_reactor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_reactor_def from rv_reactor
- Dynamic memory allocation is required for rv_reactor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_reactor() does not free the memory
allocated by rv_register_reactor(). This is fortunately not a real
memory leak problem as rv_unregister_reactor() is never called.
Simplify and merge rv_reactor_def into rv_reactor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/71cb91c86cd40df5b8c492b788787f2a73c3eaa3.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Nam Cao
|
24cbfe18d5 |
rv: Merge struct rv_monitor_def into struct rv_monitor
Each struct rv_monitor has a unique struct rv_monitor_def associated with
it. struct rv_monitor is statically allocated, while struct rv_monitor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_monitor_def from rv_monitor
- Dynamic memory allocation is required for rv_monitor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_monitor() does not free the memory
allocated by rv_register_monitor(). This is fortunately not a real
memory leak problem, as rv_unregister_monitor() is never called.
Simplify and merge rv_monitor_def into rv_monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/194449c00f87945c207aab4c96920c75796a4f53.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Nam Cao
|
b0c08dd534 |
rv: Remove unused field in struct rv_monitor_def
rv_monitor_def::task_monitor is not used. Delete it. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/502d94f2696435690a2b1fdbe80a9e56c96fcabf.1753378331.git.namcao@linutronix.de Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
8c4e53a1a0 |
tracing: Call trace_ftrace_test_filter() for the event
The trace event filter bootup self test tests a bunch of filter logic against the ftrace_test_filter event, but does not actually call the event. Work is being done to cause a warning if an event is defined but not used. To quiet the warning call the trace event under an if statement where it is disabled so it doesn't get optimized out. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas.schier@linux.dev> Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20250723194212.274458858@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Gabriele Monaco
|
58d5f0d437 |
rv: Return init error when registering monitors
Monitors generated with dot2k have their registration function (the one called during monitor initialisation) return always 0, even if the registration failed on RV side. This can hide potential errors. Return the value returned by the RV register function. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250723161240.194860-6-gmonaco@redhat.com Reviewed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Gabriele Monaco
|
560473f2e2 |
verification/rvgen: Organise Kconfig entries for nested monitors
The current behaviour of rvgen when running with the -a option is to append the necessary lines at the end of the configuration for Kconfig, Makefile and tracepoints. This is not always the desired behaviour in case of nested monitors: while tracepoints are not affected by nesting and the Makefile's only requirement is that the parent monitor is built before its children, in the Kconfig it is better to have children defined right after their parent, otherwise the result has wrong indentation: [*] foo_parent monitor [*] foo_child1 monitor [*] foo_child2 monitor [*] bar_parent monitor [*] bar_child1 monitor [*] bar_child2 monitor [*] foo_child3 monitor [*] foo_child4 monitor Adapt rvgen to look for a different marker for nested monitors in the Kconfig file and append the line right after the last sibling, instead of the last monitor. Also add the marker when creating a new parent monitor. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250723161240.194860-5-gmonaco@redhat.com Reviewed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |