The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
Do not bother disabling the function graph tracer if the per CPU disabled
field is set. Just record as normal. If tracing is disabled in the ring
buffer it will not be recorded.
Also, when tracing is enabled again, it will not drop the return call of
the function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.715752008@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The kdb_ftdump() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead, simply call tracer_tracing_off() and then tracer_tracing_on() to
disable and then enabled the entire ring buffer in one go!
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.549033722@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The ftrace_dump_one() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead use the new tracer_tracing_disable() that calls into the ring
buffer code to do the disabling.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.381188238@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow a tracer to disable writing to its buffer for a temporary amount of
time and re-enable it.
The tracer_tracing_disable() will disable writing to the trace array
buffer, and requires a tracer_tracing_enable() to re-enable it.
The difference between tracer_tracing_disable() and tracer_tracing_off()
is that the disable version can nest, and requires as many enable() calls
as disable() calls to re-enable the buffer. Where as the off() function
can be called multiple times and only requires a singe tracer_tracing_on()
to re-enable the buffer.
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.210330010@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ignore_pid boolean on the per CPU data descriptor is updated at
sched_switch when a new task is scheduled in. If the new task is to be
ignored, it is set to true, otherwise it is set to false. The current task
should always have the correct value as it is updated when the task is
scheduled in.
Instead of breaking up the read of this value, which requires preemption
to be disabled, just use this_cpu_read() which gives a snapshot of the
value. Since the value will always be correct for a given task (because
it's updated at sched switch) it doesn't need preemption disabled.
This will also allow trace events to be called with preemption enabled.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.038958766@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
There's no reason for the function tracer to check it, if tracing is
disabled, the ring buffer will not record the event anyway.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212234.868972758@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The mmiotracer referenced the per CPU array_buffer->data descriptor but
never actually used it. Remove the references to it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212234.696945463@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allocate kernel memory for processing CPU string
(/sys/kernel/tracing/osnoise/cpus) also in osnoise_cpus_write to allow
the writing of a CPU string of an arbitrary length.
This replaces the 256-byte buffer, which is insufficient with the rising
number of CPUs. For example, if I wanted to measure on every even CPU
on a system with 256 CPUs, the string would be 456 characters long.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250425091839.343289-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The structure ftrace_func_mapper only contains a single field and that is
a ftrace_hash. It is used to abstract it out from a normal hash to control
users of how it gets modified.
The freeing of a ftrace_func_mapper structure is:
free_ftrace_hash(&mapper->hash);
Without context, this looks like a bug. It should be commented that it is
not a bug and it is freed this way.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250416165420.5c717420@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Depth is stored as int because the code uses negative values to break
out of iterations. But what is recorded is always zero or positive. So
expose it as unsigned int instead of int.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-3-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure uses subops of the function tracer.
These are not shown in enabled_functions. Add a "subops:" section to the
enabled_functions line to show what functions are attached via subops. If
the subops is from the function_graph infrastructure, then show the entry
and return callbacks that are attached.
Here's an example of the output:
schedule_on_each_cpu (1) tramp: 0xffffffffc03ef000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 subops: {ent:trace_graph_entry+0x0/0x20 ret:trace_graph_return+0x0/0x150}
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250410153830.5d97f108@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The last remaining user of vfs_submount() (tracefs) is easy to convert
to fs_context_for_submount(); do that and bury that thing, along with
SB_SUBMOUNT
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If one wants to trace the name of the task that wakes up a process and
pass that to the synthetic events, there's nothing currently that lets the
synthetic events do that. Add a "common_comm" to the histogram logic that
allows histograms save the current->comm as a variable that can be passed
through and added to a synthetic event:
# cd /sys/kernel/tracing
# echo 's:wake_lat char[] waker; char[] wakee; u64 delta;' >> dynamic_events
# echo 'hist:keys=pid:comm=common_comm:ts=common_timestamp.usecs if !(common_flags & 0x18)' > events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wake_comm=$comm:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,$wake_comm,next_comm,$delta)' > events/sched/sched_switch/trigger
The above will create a synthetic trace event that will save both the name
of the waker and the wakee but only if the wakeup did not happen in a hard
or soft interrupt context.
The "common_comm" is used to save the task->comm at the time of the
initial event and is passed via the "comm" variable to the second event,
and that is saved as the "waker" field in the "wake_lat" synthetic event.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407154912.3c6c6246@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The add_to_key() function tests if the key is a string or some data. If
it's a string it does some further calculations of the string size (still
truncating it to the max size it can be), and calls strncpy().
If the key isn't as string it calls memcpy(). The interesting point is
that both use the exact same parameters:
strncpy(compound_key + key_field->offset, (char *)key, size);
} else
memcpy(compound_key + key_field->offset, key, size);
As strncpy() is being used simply as a memcpy() for a string, and since
strncpy() is deprecated, just call memcpy() for both memory and string
keys.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/20250403210637.1c477d4a@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "fields" option is set in a trace instance, it ignores the "print fmt"
portion of the trace event and just prints the raw fields defined by the
TP_STRUCT__entry() of the TRACE_EVENT() macro.
The preempt_disable/enable and irq_disable/enable events record only the
caller offset from _stext to save space in the ring buffer. Even though
the "fields" option only prints the fields, it also tries to print what
they represent too, which includes function names.
Add a check in the output of the event field printing to see if the field
name is "caller_offs" or "parent_offs" and then print the function at the
offset from _stext of that field.
Instead of just showing:
irq_disable: caller_offs=0xba634d (12215117) parent_offs=0x39d10e2 (60625122)
Show:
irq_disable: caller_offs=trace_hardirqs_off.part.0+0xad/0x130 0xba634d (12215117) parent_offs=_raw_spin_lock_irqsave+0x62/0x70 0x39d10e2 (60625122)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506105131.4b6089a9@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add adjustments to the values of the "fields" output if the buffer is a
persistent ring buffer to adjust the addresses to both the kernel core and
kernel modules if they match a module in the persistent memory and that
module is also loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325185619.54b85587@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_adjust_address() will take a given address and examine the
persistent ring buffer to see if the address matches a module that is
listed there. If it does not, it will just adjust the value to the core
kernel delta. But if the address was for something that was not part of
the core kernel text or data it should not be adjusted.
Check the result of the adjustment and only return the adjustment if it
lands in the current kernel text or data. If not, return the original
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250506102300.0ba2f9e0@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "fields" option is enabled, the "print fmt" of the trace event is
ignored and only the fields are printed. But some fields contain function
pointers. Instead of just showing the hex value in this case, show the
function name when possible:
Instead of having:
# echo 1 > options/fields
# cat trace
[..]
kmem_cache_free: call_site=0xffffffffa9afcf31 (-1448095951) ptr=0xffff888124452910 (-131386736039664) name=kmemleak_object
Have it output:
kmem_cache_free: call_site=rcu_do_batch+0x3d1/0x14a0 (-1768960207) ptr=0xffff888132ea5ed0 (854220496) name=kmemleak_object
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325213919.624181915@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that module addresses are saved in the persistent ring buffer, their
addresses can be used to adjust the address in the persistent ring buffer
to the address of the module that is currently loaded.
Instead of blindly using the text_delta that only works for core kernel
code, call the trace_adjust_address() that will see if the address matches
an address saved in the persistent ring buffer, and then uses that against
the matching module if it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506111648.5df7f3ec@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the calling conventions for ->d_automount() instances have
an odd wart - returned new mount to be attached is expected to have
refcount 2.
That kludge is intended to make sure that mark_mounts_for_expiry() called
before we get around to attaching that new mount to the tree won't decide
to take it out. finish_automount() drops the extra reference after it's
done with attaching mount to the tree - or drops the reference twice in
case of error. ->d_automount() instances have rather counterintuitive
boilerplate in them.
There's a much simpler approach: have mark_mounts_for_expiry() skip the
mounts that are yet to be mounted. And to hell with grabbing/dropping
those extra references. Makes for simpler correctness analysis, at that...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Many conditional checks in switch-case are redundant
with bpf_base_func_proto and should be removed.
Regarding the permission checks bpf_base_func_proto:
The permission checks in bpf_prog_load (as outlined below)
ensure that the trace has both CAP_BPF and CAP_PERFMON capabilities,
thus enabling the use of corresponding prototypes
in bpf_base_func_proto without adverse effects.
bpf_prog_load
......
bpf_cap = bpf_token_capable(token, CAP_BPF);
......
if (type != BPF_PROG_TYPE_SOCKET_FILTER &&
type != BPF_PROG_TYPE_CGROUP_SKB &&
!bpf_cap)
goto put_token;
......
if (is_perfmon_prog_type(type) && !bpf_token_capable(token, CAP_PERFMON))
goto put_token;
......
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20250423073151.297103-1-yangfeng59949@163.com
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The link_create.flags are currently not used for multi-uprobes, so return
-EINVAL if it is set, same as for other attach APIs.
We allow target_fd to have an arbitrary value for multi-uprobe, though,
as there are existing users (libbpf) relying on this.
Fixes: 89ae89f53d ("bpf: Add multi uprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-2-chen.dylane@linux.dev
The link_create.flags are currently not used for multi-kprobes, so return
-EINVAL if it is set, same as for other attach APIs.
We allow target_fd, on the other hand, to have an arbitrary value for
multi-kprobe, as there are existing users (libbpf) relying on this.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-1-chen.dylane@linux.dev
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb4 ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Move stack_tracer_enabled into trace_stack_sysctl_table. This is part of
a greater effort to move ctl tables into their respective subsystems
which will reduce the merge conflicts in kernel/sysctl.c.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move trace ctl tables into their own const array in
kernel/trace/trace.c. The sysctl table register is called with
subsys_initcall placing if after its original place in proc_root_init.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- fprobe: Fix to remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node
should be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: Fix to lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: Fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint
in the module.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmf0kJ8bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+bEIALiFuYBn2y26OJnfaRnW
rgSC2JupswEVg7HwsN5kA/x1ypXl9SPfJGjbiHLUTq9+4KGOBTmY+k5/OpVO+Qkh
3nYKOkZxKRTglA7hRSTH0rxDV1eobps4nv/xkPjprugcjCGU54+4yb9Hq7Kyflpa
o8p+VS/0VOJ9f3Iy9a9JRfu9qE7Qzz9USCj4N64WMgx/qczPe27twqFEaUpTf1VW
Sw9twtKnqGs9hNE2QmhlzUBuq6gOZMXkjH6t1U4pMWBGB51JqZ5ZBhC4kL/5XEIZ
bEau82El5qdieQC2B7c0RxldceKa4t4QUlJDalZGKpxvTXrCw9rFyv0dRe2cXnKm
Yo0=
=I+MO
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node should
be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint in
the module.
* tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Cleanup fprobe hash when module unloading
tracing: fprobe events: Fix possible UAF on modules
tracing: fprobe: Fix to lock module while registering fprobe
Cleanup fprobe address hash table on module unloading because the
target symbols will be disappeared when unloading module and not
sure the same symbol is mapped on the same address.
Note that this is at least disables the fprobes if a part of target
symbols on the unloaded modules. Unlike kprobes, fprobe does not
re-enable the probe point by itself. To do that, the caller should
take care register/unregister fprobe when loading/unloading modules.
This simplifies the fprobe state managememt related to the module
loading/unloading.
Link: https://lore.kernel.org/all/174343534473.843280.13988101014957210732.stgit@devnote2/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The function get_vm_area() is not defined for non-MMU builds and causes a
build error if it is used. Hide the map_pages() function around a:
#ifdef CONFIG_MMU
to keep it from being compiled when CONFIG_MMU is not set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407120111.2ccc9319@gandalf.local.home
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/4f8ece8b-8862-4f7c-8ede-febd28f8a9fe@roeck-us.net/
Fixes: 394f3f02de ("tracing: Use vmap_page_range() to map memmap ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was mistaken that the physical memory returned from "reserve_mem" had to
be vmap()'d to get to it from a virtual address. But reserve_mem already
maps the memory to the virtual address of the kernel so a simple
phys_to_virt() can be used to get to the virtual address from the physical
memory returned by "reserve_mem". With this new found knowledge, the
code can be cleaned up and simplified.
- Enforce that the persistent memory is page aligned
As the buffers using the persistent memory are all going to be
mapped via pages, make sure that the memory given to the tracing
infrastructure is page aligned. If it is not, it will print a warning
and fail to map the buffer.
- Use phys_to_virt() to get the virtual address from reserve_mem
Instead of calling vmap() on the physical memory returned from
"reserve_mem", use phys_to_virt() instead.
As the memory returned by "memmap" or any other means where a physical
address is given to the tracing infrastructure, it still needs to
be vmap(). Since this memory can never be returned back to the buddy
allocator nor should it ever be memmory mapped to user space, flag
this buffer and up the ref count. The ref count will keep it from
ever being freed, and the flag will prevent it from ever being memory
mapped to user space.
- Use vmap_page_range() for memmap virtual address mapping
For the memmap buffer, instead of allocating an array of struct pages,
assigning them to the contiguous phsycial memory and then passing that to
vmap(), use vmap_page_range() instead
- Replace flush_dcache_folio() with flush_kernel_vmap_range()
Instead of calling virt_to_folio() and passing that to
flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
This also fixes a bug where if a subbuffer was bigger than PAGE_SIZE
only the PAGE_SIZE portion would be flushed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+6oZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhq6AP481KHAgaowQCg7zrKPkMlbYBIigYoU
7aqoAg2rSLBRSQEAl8fViHZgZ9Q+O7xdozQWiIR7/KQW8VIaTcP/V7cHkAU=
=+5JB
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
"Persistent buffer cleanups and simplifications.
It was mistaken that the physical memory returned from "reserve_mem"
had to be vmap()'d to get to it from a virtual address. But
reserve_mem already maps the memory to the virtual address of the
kernel so a simple phys_to_virt() can be used to get to the virtual
address from the physical memory returned by "reserve_mem". With this
new found knowledge, the code can be cleaned up and simplified.
- Enforce that the persistent memory is page aligned
As the buffers using the persistent memory are all going to be
mapped via pages, make sure that the memory given to the tracing
infrastructure is page aligned. If it is not, it will print a
warning and fail to map the buffer.
- Use phys_to_virt() to get the virtual address from reserve_mem
Instead of calling vmap() on the physical memory returned from
"reserve_mem", use phys_to_virt() instead.
As the memory returned by "memmap" or any other means where a
physical address is given to the tracing infrastructure, it still
needs to be vmap(). Since this memory can never be returned back to
the buddy allocator nor should it ever be memmory mapped to user
space, flag this buffer and up the ref count. The ref count will
keep it from ever being freed, and the flag will prevent it from
ever being memory mapped to user space.
- Use vmap_page_range() for memmap virtual address mapping
For the memmap buffer, instead of allocating an array of struct
pages, assigning them to the contiguous phsycial memory and then
passing that to vmap(), use vmap_page_range() instead
- Replace flush_dcache_folio() with flush_kernel_vmap_range()
Instead of calling virt_to_folio() and passing that to
flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
This also fixes a bug where if a subbuffer was bigger than
PAGE_SIZE only the PAGE_SIZE portion would be flushed"
* tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use flush_kernel_vmap_range() over flush_dcache_folio()
tracing: Use vmap_page_range() to map memmap ring buffer
tracing: Have reserve_mem use phys_to_virt() and separate from memmap buffer
tracing: Enforce the persistent ring buffer to be page aligned
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is enabled.
In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same configs
as the function argument tracing requires. Just have the function
argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates
a helper array to hold the deltas between where modules are loaded
on the last boot and the current boot. This array needs to be freed
when the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This
loop is known to trigger soft lockup warnings and requires a
cond_resched(). The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can
happen if a trace event uses a dereferece pointer to something
that was not copied into the ring buffer and can be freed by the
time the trace is read, a verifier is called. At boot or module
load, the verifier scans the print format string for pointers
that can be dereferenced and it checks the arguments to make sure
they do not contain something that can be freed. The "%*p" was
not handled, which would add another argument and cause the verifier
to not only not verify this pointer, but it will look at the wrong
argument for every pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used
to determine if the bytes need to be swapped when calculations are
done. A change was made to the sorting of the mcount_loc that read
the values from the ELF file into an array and the swap happened
on the filling of the array. But one of the calculations of the
array still did the swap when it did not need to. This caused building
on a little endian machine for a big endian target to not find
the mcount function in the 'nm' table and it zeroed it out, causing
there to be no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+2tyBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjPYAPwJDti6nHTqheFwIa1WzJ3yC2tKRYKt
1E5PYW/2Ct5NmwEAqgg3TvJppXHymVdutLghhGFnlBnyTWMI+KIhparSBw8=
=NFM5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is
enabled. In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same
configs as the function argument tracing requires. Just have the
function argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates a
helper array to hold the deltas between where modules are loaded on
the last boot and the current boot. This array needs to be freed when
the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This loop is
known to trigger soft lockup warnings and requires a cond_resched().
The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can happen
if a trace event uses a dereferece pointer to something that was not
copied into the ring buffer and can be freed by the time the trace is
read, a verifier is called. At boot or module load, the verifier
scans the print format string for pointers that can be dereferenced
and it checks the arguments to make sure they do not contain
something that can be freed. The "%*p" was not handled, which would
add another argument and cause the verifier to not only not verify
this pointer, but it will look at the wrong argument for every
pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used to
determine if the bytes need to be swapped when calculations are done.
A change was made to the sorting of the mcount_loc that read the
values from the ELF file into an array and the swap happened on the
filling of the array. But one of the calculations of the array still
did the swap when it did not need to. This caused building on a
little endian machine for a big endian target to not find the mcount
function in the 'nm' table and it zeroed it out, causing there to be
no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
* tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix missing unlock on double nested monitors return path
scripts/sorttable: Fix endianness handling in build-time mcount sort
tracing: Verify event formats that have "%*p.."
ftrace: Add cond_resched() to ftrace_graph_set_hash()
tracing: Free module_delta on freeing of persistent ring buffer
ftrace: Have tracing function args depend on PROBE_EVENTS_BTF_ARGS
-----BEGIN PGP SIGNATURE-----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=Biv4
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull more printk updates from Petr Mladek:
- Silence warnings about candidates for ‘gnu_print’ format attribute
* tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: Silence false positive GCC warning for va_format()
vsnprintf: Drop unused const char fmt * in va_format()
vsnprintf: Mark binary printing functions with __printf() attribute
tracing: Mark binary printing functions with __printf() attribute
seq_file: Mark binary printing functions with __printf() attribute
seq_buf: Mark binary printing functions with __printf() attribute
Some architectures do not have data cache coherency between user and
kernel space. For these architectures, the cache needs to be flushed on
both the kernel and user addresses so that user space can see the updates
the kernel has made.
Instead of using flush_dcache_folio() and playing with virt_to_folio()
within the call to that function, use flush_kernel_vmap_range() which
takes the virtual address and does the work for those architectures that
need it.
This also fixes a bug where the flush of the reader page only flushed one
page. If the sub-buffer order is 1 or more, where the sub-buffer size
would be greater than a page, it would miss the rest of the sub-buffer
content, as the "reader page" is not just a page, but the size of a
sub-buffer.
Link: https://lore.kernel.org/all/CAG48ez3w0my4Rwttbc5tEbNsme6tc0mrSN95thjXUFaJ3aQ6SA@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/20250402144953.920792197@goodmis.org
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions");
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The code to map the physical memory retrieved by memmap currently
allocates an array of pages to cover the physical memory and then calls
vmap() to map it to a virtual address. Instead of using this temporary
array of struct page descriptors, simply use vmap_page_range() that can
directly map the contiguous physical memory to a virtual address.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.754618481@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reserve_mem kernel command line option may pass back a physical
address, but the memory is still part of the normal memory just like
using memblock_alloc() would be. This means that the physical memory
returned by the reserve_mem command line option can be converted directly
to virtual memory by simply using phys_to_virt().
When freeing the buffer there's no need to call vunmap() anymore as the
memory allocated by reserve_mem is freed by the call to
reserve_mem_release_by_name().
Because the persistent ring buffer can also be allocated via the memmap
option, which *is* different than normal memory as it cannot be added back
to the buddy system, it must be treated differently. It still needs to be
virtually mapped to have access to it. It also can not be freed nor can it
ever be memory mapped to user space.
Create a new trace_array flag called TRACE_ARRAY_FL_MEMMAP which gets set
if the buffer is created by the memmap option, and this will prevent the
buffer from being memory mapped by user space.
Also increment the ref count for memmap'ed buffers so that they can never
be freed.
Link: https://lore.kernel.org/all/Z-wFszhJ_9o4dc8O@kernel.org/
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.583750106@goodmis.org
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Enforce that the address and the size of the memory used by the persistent
ring buffer is page aligned. Also update the documentation to reflect this
requirement.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.412882844@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit ac91052f0a ("tracing: tprobe-events: Fix leakage of module
refcount") moved try_module_get() from __find_tracepoint_module_cb()
to find_tracepoint() caller, but that introduced a possible UAF
because the module can be unloaded before try_module_get(). In this
case, the module object should be freed too. Thus, try_module_get()
does not only fail but may access to the freed object.
To avoid that, try_module_get() in __find_tracepoint_module_cb()
again.
Link: https://lore.kernel.org/all/174342990779.781946.9138388479067729366.stgit@devnote2/
Fixes: ac91052f0a ("tracing: tprobe-events: Fix leakage of module refcount")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
RV doesn't support nested monitors having children monitors themselves
and exits with the EINVAL code. However, it returns without unlocking
the rv_interface_lock.
Unlock the lock before returning from the initialisation function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250402071351.19864-2-gmonaco@redhat.com
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202503310200.UBXGitB4-lkp@intel.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If a persistent ring buffer is created, a "module_delta" array is also
allocated to hold the module deltas of loaded modules that match modules
in the scratch area. If this buffer gets freed, the module_delta array is
not freed and causes a memory leak.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250401124525.1f9ac02a@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The option PROBE_EVENTS_BTF_ARGS enables the functions
btf_find_func_proto() and btf_get_func_param() which are used by the
function argument tracing code. The option FUNCTION_TRACE_ARGS was
dependent on the same configs that PROBE_EVENTS_BTF_ARGS was dependent on,
but it was also dependent on PROBE_EVENTS_BTF_ARGS. In fact, if
PROBE_EVENTS_BTF_ARGS is supported then FUNCTION_TRACE_ARGS is supported.
Just make FUNCTION_TRACE_ARGS depend on PROBE_EVENTS_BTF_ARGS.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250401113601.17fa1129@gandalf.local.home
Fixes: 533c20b062 ("ftrace: Add print_function_args()")
Closes: https://lore.kernel.org/all/DB9PR08MB75820599801BAD118D123D7D93AD2@DB9PR08MB7582.eurprd08.prod.outlook.com/
Reported-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory
by the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should
not be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the persistent
memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module helper
function was created to iterate over all the currently loaded modules.
This has a callback to be called for each module. This is needed for
when tracing is started in the persistent buffer and the currently loaded
modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were loaded
The last_boot_info file is updated to print out the addresses of where
the kernel "_text" location was loaded from a previous boot, as well
as where the modules are loaded. If the buffer is recording the current
boot, it only prints "# Current" so that it does not expose the KASLR
offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command line can
not be changed easily, the ring buffer needs to be freed when it is not
going to be used. The memory for the buffer will always be allocated at
boot up, but if the system isn't going to enable tracing, the memory needs
to be freed. Allow it to be freed and added back to the kernel memory
pool.
- Allow stack traces to print the function names in the persistent buffer
Now that the modules are saved in the persistent ring buffer, if the same
modules are loaded, the printing of the function names will examine the
saved modules. If the module is found in the scratch area and is also
loaded, then it will do the offset shift and use kallsyms to display the
function name. If the address is not found, it simply displays the address
from the previous boot in hex.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+cUERQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrAsAQCFt2nfzxoe3wtF5EqIT1VHp/8bQVjG
gBe8B6ouboreogD/dS7yK8MRy24ZAmObGwYG0RbVicd50S7P8Rf7+823ng8=
=OJKk
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged ee57ab5a32 ("locking/lockdep: Disable
KASAN instrumentation of lockdep.c").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEIduBR9MnFA82q/jtumpXJwqY6poFAmfmwrsUHHBldHIucGF2
bHVAc3VzZS5jb20ACgkQumpXJwqY6prWxgf/S7Pvdywm10vJ6fooYa+GxXNMwhyh
XRjZ4m9gjeTNf2KLwX0XHv0XZeFHOmHfjd3iI+pS6CXZnCFTN9J3XPLYsrTxXUb6
U6zzLf8Zsz8TzeI4dgvSBsZln7oICSACkAgdJCq23hpNKeaeRo91dgiZaIwyZJG3
FekqSFtP7pYhfFoNkrFKysqbgl1+RWWZ79L2qRJA0bPzVFlvRUuh6cOHQw+8RMqf
BYLwnArjTkW8AcXpxIXSiwphDHVZ81B96xoplavyoprA5FDpv1W+8y4DtxdWFn+1
QVWCs/ZV3KrwXWpZev625w3fIOOIXILqRINOzLfvXTw+1xFS3TzSQEpVeg==
=4OKc
-----END PGP SIGNATURE-----
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and
preempt_disable() in the module code and its users has
been replaced with just rcu_read_lock()
- The rest of changes are smaller fixes and updates
* tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits)
MAINTAINERS: Update the MODULE SUPPORT section
module: Remove unnecessary size argument when calling strscpy()
module: Replace deprecated strncpy() with strscpy()
params: Annotate struct module_param_attrs with __counted_by()
bug: Use RCU instead RCU-sched to protect module_bug_list.
static_call: Use RCU in all users of __module_text_address().
kprobes: Use RCU in all users of __module_text_address().
bpf: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_address().
x86: Use RCU in all users of __module_address().
cfi: Use RCU while invoking __module_address().
powerpc/ftrace: Use RCU in all users of __module_text_address().
LoongArch: ftrace: Use RCU in all users of __module_text_address().
LoongArch/orc: Use RCU in all users of __module_address().
arm64: module: Use RCU in all users of __module_text_address().
ARM: module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_address().
module: Use RCU in search_module_extables().
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmfi6ZAACgkQ6rmadz2v
bTpLOg/+J7xUddPMhlpFAUlifQEadE5hmw6v1tXpM3zyKHzUWJiv/qsx3j8/ckgD
D+d4P8bqIbI9SSuIS4oZ0+D9pr/g7GYztnoYZmPiYJ7v2AijPuof5dsagFQE8E2y
rhfbt9KHTMzzkdkTvaAZaITS/HWAoJ2YVRB6gfLex2ghcXYHcgmtKRZniQrbBiFZ
MIXBN8Rg6HP+pUdIVllSXFcQCb3XIgjPONRAos4hr5tIm+3Ku7Jvkgk2H/9vUcoF
bdXAcg8xygyH7eY+1l3e7nEPQlG0jUZEsL+tq+vpdoLRLqlIpAUYmwUvqcmq4dPS
QGFjiUcpDbXlxsUFpzjXHIFto7fXCfND7HEICQPwAncdflIIfYaATSQUfkEexn0a
wBCFlAChrEzAmg2vFl4EeEr0fdSe/3jswrgKx0m6ctKieMjgloBUeeH4fXOpfkhS
9tvhuduVFuronlebM8ew4w9T/mBgbyxkE5KkvP4hNeB3ni3N0K6Mary5/u2HyN1e
lqTlnZxRA4p6lrvxce/mDrR4VSwlKLcSeQVjxAL1afD5KRkuZJnUv7bUhS361vkG
IjNrQX30EisDAz+X7tMn3ndBf9vVatwFT4+c3yaxlQRor1WofhDfT88HPiyB4QqQ
Kdx2EHgbQxJp4vkzhp4/OXlTfkihsMEn8egzZuphdPEQ9Y+Jdwg=
=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
Instead of using kaslr_offset() just record the location of "_text". This
makes it possible for user space to use either the System.map or
/proc/kallsyms as what to map all addresses to functions with.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250326220304.38dbedcd@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the previous boot trace buffer can include module text address in
the stacktrace. As same as the kernel text address, convert the module
text address using the module address information.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174282689201.356346.17647540360450727687.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the last boot data is already cleared, there is no reason to update it
again. Skip if the TRACE_ARRAY_FL_LAST_BOOT is cleared.
Also, for calling save_mod() when module loading, we don't need to check
the trace is active or not because any module address can be on the
stacktrace.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174165660328.1173316.15529357882704817499.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In allocate_trace_buffer() the following code:
buf->buffer = ring_buffer_alloc_range(size, rb_flags, 0,
tr->range_addr_start,
tr->range_addr_size,
struct_size(tscratch, entries, 128));
tscratch = ring_buffer_meta_scratch(buf->buffer, &scratch_size);
setup_trace_scratch(tr, tscratch, scratch_size);
Has undefined behavior if ring_buffer_alloc_range() fails because
"scratch_size" is not initialize. If the allocation fails, then
buf->buffer will be NULL. The ring_buffer_meta_scratch() will return
NULL immediately if it is passed a NULL buffer and it will not update
scratch_size. Then setup_trace_scratch() will return immediately if
tscratch is NULL.
Although there's no real issue here, but it is considered undefined
behavior to pass an uninitialized variable to a function as input, and
UBSan may complain about it.
Just initialize scratch_size to zero to make the code defined behavior and
a little more robust.
Link: https://lore.kernel.org/all/44c5deaa-b094-4852-90f9-52f3fb10e67a@stanley.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are some code which depends on CONFIG_MODULES. #ifdef
to enclose it.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174230515367.2909896.8132122175220657625.stgit@mhiramat.tok.corp.google.com
Fixes: dca91c1c5468 ("tracing: Have persistent trace instances save module addresses")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make the ring buffer on reserved memory to be freeable. This allows us
to free the trace instance on the reserved memory without changing
cmdline and rebooting. Even if we can not change the kernel cmdline
for security reason, we can release the reserved memory for the ring
buffer as free (available) memory.
For example, boot kernel with reserved memory;
"reserve_mem=20M:2M:trace trace_instance=boot_mapped^traceoff@trace"
~ # free
total used free shared buff/cache available
Mem: 1995548 50544 1927568 14964 17436 1911480
Swap: 0 0 0
~ # rmdir /sys/kernel/tracing/instances/boot_mapped/
[ 23.704023] Freeing reserve_mem:trace memory: 20476K
~ # free
total used free shared buff/cache available
Mem: 2016024 41844 1956740 14968 17440 1940572
Swap: 0 0 0
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/173989134814.230693.18199312930337815629.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a module is loaded and a persistent buffer is actively tracing, add
it to the list of modules in the persistent memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.469844721@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the last boot module's names and addresses to the last_boot_info file.
This only shows the module information from a previous boot. If the buffer
is started and is recording the current boot, this file still will only
show "current".
~# cat instances/boot_mapped/last_boot_info
10c00000 [kernel]
ffffffffc00ca000 usb_serial_simple
ffffffffc00ae000 usbserial
ffffffffc008b000 bfq
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.299186021@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For trace instances that are mapped to persistent memory, have them use
the scratch area to save the currently loaded modules. This will allow
where the modules have been loaded on the next boot so that their
addresses can be deciphered by using where they were loaded previously.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.129741650@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's no reason to save the KASLR offset for the ring buffer itself.
That is used by the tracer. Now that the tracer has a way to save data in
the persistent memory of the ring buffer, have the tracing infrastructure
take care of the saving of the KASLR offset.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.792722274@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that there's one meta data at the start of the persistent memory used by
the ring buffer, allow the caller to request some memory right after that
data that it can use as its own persistent memory.
Also fix some white space issues with ring_buffer_alloc().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.619631731@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of just having a meta data at the first page of each sub buffer
that has duplicate data, add a new meta page to the entire block of memory
that holds the duplicate data and remove it from the sub buffer meta data.
This will open up the extra memory in this first page to be used by the
tracer for its own persistent data.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.446351513@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of saving off the text and data pointers and using them to compare
with the current boot's text and data pointers, just save off the KASLR
offset. Then that can be used to figure out how to read the previous boots
buffer.
The last_boot_info will now show this offset, but only if it is for a
previous boot:
~# cat instances/boot_mapped/last_boot_info
39000000 [kernel]
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
If the KASLR offset saved is for the current boot, the last_boot_info will
show the value of "current".
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.274956504@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- selftests/ftrace: Improve the ftracetest to add followngs.
. Expand the tprobe event test to check if it can correctly find
the wrong format tracepoint name.
. Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
. Add a new dynamic events argument limitation test case which checks
max number of probe arguments.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmflTlobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8ba9UIALzzZQxzUhJYO/B/XaCz
KTuSrU2594cLr3nCrmCfL3UHUCr5IcjXKCfUdrgzE9mckWF+nVRXWwbp29KpOQky
fzU9Ardbr7ksGAYFk4My+P/BeYa7vh9LwofXzWlJibANVxWvq66+GfKnWnh1P8Bl
/zjov61DAEQmDfXNGZ2oTmKnYYMoPkJU4voRvAEUgiP02SrF04UUa00uC7hmZJJV
aI5b6TatE5FDEmAoHWh0cf04HoyevRyLVOQd5GSswH/oWpyhs90M7a9WENHamBx6
RXEZ3xYyuH9zBSvYVeRn2H1eHnGCR4RMctZiRGXF8EdLWo7RXRQ1Hp9CgvwDrU8Z
IL0=
=vZ3e
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable tracing
via the kernel command line. Unfortunately, by the time the login prompt
appears, the trace is overwritten by the init process and other user space
start up applications. Adding a "traceoff_after_boot" will disable tracing
when the kernel passes control to init which will allow developers to be
able to see the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in the
process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers that
are assigned when the variables are created. These variables should all be
constants.
- Other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+V9IhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4RAP9JhE3n69pGuOVaJTN/LGLr2Axl59n4
KqZSZS1nUM76/gD6AxYpR7nxyxgJ7VjNkLptS9tSjJVdPDxGAl0v3eO04w4=
=SU30
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable
tracing via the kernel command line. Unfortunately, by the time the
login prompt appears, the trace is overwritten by the init process
and other user space start up applications.
Adding a "traceoff_after_boot" will disable tracing when the kernel
passes control to init which will allow developers to be able to see
the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace
events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in
the process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers
that are assigned when the variables are created. These variables
should all be constants.
- Other minor clean ups and fixes
* tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Replace strncpy with memcpy for fixed-length substring copy
tracing: Fix synth event printk format for str fields
tracing: Do not use PERF enums when perf is not defined
tracing: Ensure module defining synth event cannot be unloaded while tracing
tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
tracing: Align synth event print fmt
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
tracepoint: Print the function symbol when tracepoint_debug is set
tracing: Constify struct event_trigger_ops
scripts/tracing: Remove scripts/tracing/draw_functrace.py
tracing: Update MAINTAINERS file to include tracepoint.c
tracing/user_events: Slightly simplify user_seq_show()
tracing/user_events: Don't use %pK through printk
tracing: gfp: Remove duplication of recording GFP flags
tracing: Remove orphaned event_trace_printk
ring-buffer: Fix typo in comment about header page pointer
tracing: Add traceoff_after_boot option
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as well as
allows BPF programs to be attached to these locations to extract even more
data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing the
build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the cumulative
model is equivalent to running single components using the same
reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing but
an empty container for other monitors. Controlling the sched monitor
(enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+QhuxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg62AP9bkeNDbiCuAqjZGddV09Hw26wC3yum
kQoNSebD8G52rQEA9GDjK37xGzYwW/fJokhJVTV39qfub6inAJE5dS6WeQY=
=8Ikv
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the function
graph tracer (funcgraph-args) that when set, the tracers will record the
registers that hold the arguments into each function event. On reading of
the trace, it will use BTF to print those arguments. Most archs support up
to 6 arguments (depending on the complexity of the arguments) and those
are printed. If a function has more arguments then what was recorded, the
output will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+M9vRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrBGAP9NTn4Lpci69n8FJGfz+UKUEKbzOOeg
QrkIZIxbm8N56gEA0RaUionWjt1znZXUdBTsE3h+en/Ik0//VZytQcmJBwM=
=fxuG
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the
function graph tracer (funcgraph-args) that when set, the tracers
will record the registers that hold the arguments into each function
event. On reading of the trace, it will use BTF to print those
arguments. Most archs support up to 6 arguments (depending on the
complexity of the arguments) and those are printed.
If a function has more arguments then what was recorded, the output
will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
* tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use hashtable.h for event_hash
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
function_graph: Remove the unused variable func
ftrace: Add arguments to function tracer
ftrace: Have funcgraph-args take affect during tracing
ftrace: Add support for function argument to graph tracer
ftrace: Add print_function_args()
ftrace: Have ftrace_free_filter() WARN and exit if ops is active
fgraph: Correct typo in ftrace_return_to_handler comment
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros in
the vmlinux elf file. The addresses are stored in the Elf_Rela location.
To sort at build time, an array is allocated and the addresses are added
to it via the content of the mcount_loc section as well as he Elf_Rela
data. After sorting, the information is put back into the Elf_Rela which
now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as well
When clang is used, the mcount_loc section contains the addresses, unlike
the gcc build. An array is still created and the sorting works for both
methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via nm -S
which shows the functions as well as their sizes. Using this information
the sorttable code can determine if a function in the mcount_loc section
was weak and overridden. If the function is not found, it is set to be
zero. On boot, when the mcount_loc section is read and the ftrace table is
created, if the address in the mcount_loc is not in the kernel core text
then it is removed and not added to the ftrace_filter_functions (the
functions that can be attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace functions
On boot, a report of how many pages were used by the ftrace table as well
as how they were grouped (the table holds a list of sections that are
groups of pages that were able to be allocated). The removing of the weak
functions required the accounting to be updated.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+MnThQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qivsAQDhPOCaONai7rvHX9T1aOHGjdajZ7SI
qoZgBOsc2ZUkoQD/U2M/m7Yof9aR4I+VFKtT5NsAwpfqPSOL/t/1j6UEOQ8=
=45AV
-----END PGP SIGNATURE-----
Merge tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing / sorttable updates from Steven Rostedt:
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros
in the vmlinux elf file. The addresses are stored in the Elf_Rela
location.
To sort at build time, an array is allocated and the addresses are
added to it via the content of the mcount_loc section as well as he
Elf_Rela data. After sorting, the information is put back into the
Elf_Rela which now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as
well
When clang is used, the mcount_loc section contains the addresses,
unlike the gcc build. An array is still created and the sorting works
for both methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via
'nm -S' which shows the functions as well as their sizes. Using this
information the sorttable code can determine if a function in the
mcount_loc section was weak and overridden. If the function is not
found, it is set to be zero. On boot, when the mcount_loc section is
read and the ftrace table is created, if the address in the
mcount_loc is not in the kernel core text then it is removed and not
added to the ftrace_filter_functions (the functions that can be
attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace
functions
On boot, a report of how many pages were used by the ftrace table as
well as how they were grouped (the table holds a list of sections
that are groups of pages that were able to be allocated). The
removing of the weak functions required the accounting to be updated.
* tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/sorttable: Allow matches to functions before function entry
scripts/sorttable: Use normal sort if theres no relocs in the mcount section
ftrace: Check against is_kernel_text() instead of kaslr_offset()
ftrace: Test mcount_loc addr before calling ftrace_call_addr()
ftrace: Have ftrace pages output reflect freed pages
ftrace: Update the mcount_loc check of skipped entries
scripts/sorttable: Zero out weak functions in mcount_loc table
scripts/sorttable: Always use an array for the mcount_loc sorting
scripts/sorttable: Have mcount rela sort use direct values
arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64
-----BEGIN PGP SIGNATURE-----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=oxfV
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
checkpatch.pl reports the following warning:
WARNING: Prefer strscpy, strscpy_pad, or __nonstring over strncpy
(see: https://github.com/KSPP/linux/issues/90)
In synth_field_string_size(), replace strncpy() with memcpy() to copy 'len'
characters from 'start' to 'buf'. The code manually adds a NUL terminator
after the copy, making memcpy safe here.
Link: https://lore.kernel.org/20250325181232.38284-1-siddarthsgml@gmail.com
Signed-off-by: Siddarth G <siddarthsgml@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.
Replace %.*s with %s as the C string is guaranteed to be null-terminated.
The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 8db4d6bfbb ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
two locking commits in the locking tree,
part of the locking-core-2025-03-22 pull request. ]
x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid='
(Brendan Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and
related cleanups (Brian Gerst)
- Convert the stackprotector canary to a regular percpu
variable (Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB instruction
(Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation
(Kirill A. Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems,
to support PCI BAR space beyond the 10TiB region
(CONFIG_PCI_P2PDMA=y) (Balbir Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Bootup:
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0
(Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI headers
(Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
(Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking instructions
(Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in nmi_shootdown_cpus()
(Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel,
Artem Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst,
Dan Carpenter, Dr. David Alan Gilbert, H. Peter Anvin,
Ingo Molnar, Josh Poimboeuf, Kevin Brodsky, Mike Rapoport,
Lukas Bulwahn, Maciej Wieczor-Retman, Max Grobecker,
Patryk Wlazlyn, Pawan Gupta, Peter Zijlstra,
Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak,
Vitaly Kuznetsov, Xin Li, liuye.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Dcb3
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
[ Merge note, these two commits are identical:
- f3fa0e40df ("sched/clock: Don't define sched_clock_irqtime as static key")
- b9f2b29b94 ("sched: Don't define sched_clock_irqtime as static key")
The first one is a cherry-picked version of the second, and the first one
is already upstream. ]
Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli,
Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SuQE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
This pull request contains the following branches:
docs.2025.02.04a:
- Add broken-timing possibility to stallwarn.rst.
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr().
- Document self-propagating callbacks.
- Point call_srcu() to call_rcu() for detailed memory ordering.
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header.
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text.
- Remove references to old grace-period-wait primitives.
srcu.2025.02.05a:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock at the
cost of calling synchronize_rcu() in synchronize_srcu(). Moreover, by
returning the percpu offset of the counter at srcu_read_lock_fast()
time, srcu_read_unlock_fast() can save extra pointer dereferencing,
which makes it faster than srcu_read_{un,}lock_lite().
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible.
torture.2025.02.05a:
- Add get_torture_init_jiffies() to return the start time of the test.
- Add a test_boost_holdoff module parameter to allow delaying boosting
tests when building rcutorture as built-in.
- Add grace period sequence number logging at the beginning and end of
failure/close-call results.
- Switch to hexadecimal for the expedited grace period sequence number
in the rcu_exp_grace_period trace point.
- Make cur_ops->format_gp_seqs take buffer length.
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool.
- Complain when invalid SRCU reader_flavor is specified.
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing.
misc.2025.03.04a:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing.
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes().
- Fix get_state_synchronize_rcu_full() GP-start detection.
- Move RCU Tasks self-tests to core_initcall().
- Print segment lengths in show_rcu_nocb_gp_state().
- Make RCU watch ct_kernel_exit_state() warning.
- Flush console log from kernel_power_off().
- rcutorture: Allow a negative value for nfakewriters.
- rcu: Update TREE05.boot to test normal synchronize_rcu().
- rcu: Use _full() API to debug synchronize_rcu().
lazypreempt.2025.03.04a: Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs().
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY.
- Update __cond_resched comment about RCU quiescent states.
- Handle unstable rdp in rcu_read_unlock_strict().
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y.
- osnoise: Provide quiescent states.
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination.
- Limit PREEMPT_RCU configurations.
- Make rcutorture senario TREE07 and senario TREE10 use PREEMPT_LAZY=y.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmfeBLQACgkQSXnow7UH
+rh11Qf/Rt6IZJ/YT/V9Sd+8hMx4O0BMh779pr9cD6mbAG+FDk2Yeva1m8vIdFOb
qId6oc8K/ef2JfFjSn0oHMzQP2D3XUyiJWPNbBDHv/D8Os8GZgjzu8dkxVkSbdbY
OxtvIflbcqFN1JDJfGKZnTEW0/YxGqfnS9b6R7iyyA7SOGQ/WubGOE5qNCqPufc9
zJiP+qTUFYQzCIiPlEJul39o9KboPogbt3QAAQjWmi3utd77ehJnm/15FvAjyau4
uhC2cnGfMY535rQaiaQeBQ/IHIowKripCq0JQFvcUNdyArZM3HOI2x79+2II6ft7
mjHskNODOIJHfW2o1RzQ0yRYAywFIg==
=J+mH
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
Add 3 per-cpu monitors as part of the sched model:
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a per-task monitor as part of the sched model:
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add 2 per-cpu monitors as part of the sched model:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Monitors describing complex systems, such as the scheduler, can easily
grow to the point where they are just hard to understand because of the
many possible state transitions.
Often it is possible to break such descriptions into smaller monitors,
sharing some or all events. Enabling those smaller monitors concurrently
is, in fact, testing the system as if we had one single larger monitor.
Splitting models into multiple specification is not only easier to
understand, but gives some more clues when we see errors.
Add the possibility to create container monitors, whose only purpose is
to host other nested monitors. Enabling a container monitor enables all
nested ones, but it's still possible to enable nested monitors
independently.
Add the sched monitor as first container, for now empty.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7 ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Convert the event_hash array in trace_output.c to use the generic
hashtable implementation from hashtable.h instead of the manually
implemented hash table.
This simplifies the code and makes it more maintainable by using the
standard hashtable API defined in hashtable.h.
Rename EVENT_HASHSIZE to EVENT_HASH_BITS to properly reflect its new
meaning as the number of bits for the hashtable size.
Link: https://lore.kernel.org/20250323132800.3010783-1-sashal@kernel.org
Link: https://lore.kernel.org/20250319190545.3058319-1-sashal@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.
This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.
Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni <gpaoloni@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The vast majority of ftrace event print fmt consist of a space-separated
field=value pair. Synthetic event currently use a comma-separated
field=value pair, which sticks out from events created via more
classical means.
Align the format of synth events so they look just like any other event,
for better consistency and less headache when doing crude text-based
data processing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250319215028.1680278-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f9 ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
'event_trigger_ops mwifiex_if_ops' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
31368 9024 6200 46592 b600 kernel/trace/trace_events_trigger.o
After:
=====
text data bss dec hex filename
31752 8608 6200 46560 b5e0 kernel/trace/trace_events_trigger.o
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/66e8f990e649678e4be37d4d1a19158ca0dea2f4.1741521295.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The perf_event_read_event_output helper is currently only available to
tracing protrams, but is useful for other BPF programs like sched_ext
schedulers. When the helper is available, provide its bpf_func_proto
directly from the bpf base_proto.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250318030753.10949-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- tprobe-events: Fix to clean up tprobe correctly when module unload
tprobe (Tracepoint probe) event does not set TRACEPOINT_STUB to its
'tpoint' pointer when unloading module, thus it is shown as a normal
'fprobe' instead of 'tprobe' and never comes back.
- tprobe-events: Fix leakage of module refcount
When a tprobe's target module is loaded, it gets the module's refcount
in the module notifier but forgot to put it after registering the probe
on it. Fix to get the refcount only when registering tprobe.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmfYFpobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bi0kH/3wSyMa7wP7pSPQ1Hq8i
ZLeKa7pSS3X39IE6urvpYrTUBRw75tqSSozyF6g8jM3Tj8ISpF9rlZJ6ct775mTR
9Ld9wPNgnj0pCZU29VGf9TPm3JCm5V0h0bhE9qZp8wZRiedbwg9e6uZ92LBLAmW+
MisEmLsKrYcOUF1bwhLwoNRzlwidhHKCBAF6vUqVC62kktCe08XKKmiusslVfEZz
KrU0XM1MPnncWd2Cp3qw9ywcC40ES61lBdhMjJcGM3yKqKqlJSQxIBa5rOl0TlJA
D58bEpPhoyGT3sWS7UlqVjdkHy9NtpFx3nvcvPGCrDMLl9qwj4aSrwUBjK693RS7
Dyo=
=D3X0
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Clean up tprobe correctly when module unload
Tracepoint probes do not set TRACEPOINT_STUB on the 'tpoint' pointer
when unloading a module, thus they show as a normal 'fprobe' instead
of 'tprobe' and never come back
- Fix leakage of tprobe module refcount
When a tprobe's target module is loaded, it gets the module's
refcount in the module notifier but forgot to put it after
registering the probe on it.
Fix it by getting the refcount only when registering tprobe.
* tag 'probes-fixes-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix leakage of module refcount
tracing: tprobe-events: Fix to clean up tprobe correctly when module unload
Use preempt_model_str() instead of manually conducting the preemption
model.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-10-bigeasy@linutronix.de
Tracing instances have a ref count to keep them around while files within
their directories are open. This prevents them from being deleted while
they are used. The histogram code had some files that needed to take the
ref count and that was added, but the error paths did not decrement the
ref counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ9cE8hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtm8AQDrdfwo63g/K0xpM0Uej9Ex5pBkHEq/
WwCI2hUbPya0wAEAtEcfvgt7P0GuO0PNOYY3uzhAokfBiN04elatbLEetQ4=
=i35g
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
When enabling the tracepoint at loading module, the target module
refcount is incremented by find_tracepoint_in_module(). But it is
unnecessary because the module is not unloaded while processing
module loading callbacks.
Moreover, the refcount is not decremented in that function.
To be clear the module refcount handling, move the try_module_get()
callsite to trace_fprobe_create_internal(), where it is actually
required.
Link: https://lore.kernel.org/all/174182761071.83274.18334217580449925882.stgit@devnote2/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
When unloading module, the tprobe events are not correctly cleaned
up. Thus it becomes `fprobe-event` and never be enabled again even
if loading the same module again.
For example;
# cd /sys/kernel/tracing
# modprobe trace_events_sample
# echo 't:my_tprobe foo_bar' >> dynamic_events
# cat dynamic_events
t:tracepoints/my_tprobe foo_bar
# rmmod trace_events_sample
# cat dynamic_events
f:tracepoints/my_tprobe foo_bar
As you can see, the second time my_tprobe starts with 'f' instead
of 't'.
This unregisters the fprobe and tracepoint callback when module is
unloaded but marks the fprobe-event is tprobe-event.
Link: https://lore.kernel.org/all/174158724946.189309.15826571379395619524.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.
A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().
Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cd ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
__module_address() can be invoked within a RCU section, there is no
requirement to have preemption disabled.
Replace the preempt_disable() section around __module_address() with
RCU.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matt Bobrowski <mattbobrowski@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: bpf@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250129084751.tH6iidUO@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The modules list and module::kallsyms can be accessed under RCU
assumption.
Remove module_assert_mutex_or_preempt() from find_module_all() so it can
be used under RCU protection without warnings. Update its callers to use
RCU protection instead of preempt_disable().
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Cc: live-patching@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250108090457.512198-7-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Variable func is not effectively used, so delete it.
kernel/trace/trace_functions_graph.c:925:16: warning: variable ‘func’ set but not used.
This happened because the variable "func" which came from "call->func" was
replaced by "ret_func" coming from "graph_ret->func" but "func" wasn't
removed after the replacement.
Link: https://lore.kernel.org/20250307021412.119107-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=19250
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2 seq_puts() calls can be merged.
It saves a few lines of code and a few cycles, should it matter.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/845caa94b74cea8d72c158bf1994fe250beee28c.1739979791.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To reduce RCU noise for nohz_full configurations, osnoise depends
on cond_resched() providing quiescent states for PREEMPT_RCU=n
configurations. For PREEMPT_RCU=y configurations -- where
cond_resched() is a stub -- we do this by directly calling
rcu_momentary_eqs().
With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), however, we have a
configuration with (PREEMPTION=y, PREEMPT_RCU=n) where neither
of the above can help.
Handle that by providing an explicit quiescent state here for all
configurations.
As mentioned above this is not needed for non-stubbed cond_resched(),
but, providing a quiescent state here just pulls in one that a future
cond_resched() would provide, so doesn't cause any extra work for
this configuration.
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Some monitor files like the main header and the Kconfig are missing the
license identifier.
Add it to those and make sure the automatic generation script includes
the line in newly created monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250218123121.253551-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Wire up the code to print function arguments in the function tracer.
This functionality can be enabled/disabled during runtime with
options/func-args.
ping-689 [004] b.... 77.170220: dummy_xmit(skb = 0x82904800, dev = 0x882d0000) <-dev_hard_start_xmit
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185823.154996172@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, when function_graph is started, it looks at the option
funcgraph-args, and if it is set, it will enable tracing of the arguments.
But if tracing is already running, and the user enables funcgraph-args, it
will have no effect. Instead, it should enable argument tracing when it is
enabled, even if it means disabling the function graph tracing for a short
time in order to do the transition.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.978998710@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Wire up the code to print function arguments in the function graph
tracer. This functionality can be enabled/disabled during runtime with
options/funcgraph-args.
Example usage:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.810321199@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a function to decode argument types with the help of BTF. Will
be used to display arguments in the function and function graph
tracer.
It can only handle simply arguments and up to FTRACE_REGS_MAX_ARGS number
of arguments. When it hits a max, it will print ", ...":
page_to_skb(vi=0xffff8d53842dc980, rq=0xffff8d53843a0800, page=0xfffffc2e04337c00, offset=6160, len=64, truesize=1536, ...)
And if it hits an argument that is not recognized, it will print the raw
value and the type of argument it is:
make_vfsuid(idmap=0xffffffff87f99db8, fs_userns=0xffffffff87e543c0, kuid=0x0 (STRUCT))
__pti_set_user_pgtbl(pgdp=0xffff8d5384ab47f8, pgd=0x110e74067 (STRUCT))
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.639418500@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_free_filter() is used to reset the ops filters. But it must be
done if the ops is not currently active (tracing). If it is, it will mess
up the ftrace accounting of what functions are attached and what is not.
WARN and exit the ftrace_free_filter() if the ops is active when it is
called.
Currently, it doesn't seem if anything does this, but it may in the
future.
Link: https://lore.kernel.org/all/20250219095330.2e9f171c@gandalf.local.home/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250219135040.3a9fbe00@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- probe-events: Some issues are fixed.
. probe-events: Remove unused MAX_ARG_BUF_LEN macro.
MAX_ARG_BUF_LEN is not used so remove it.
. fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
. tprobe-events: Reject invalid tracepoint name
User can specify an invalid tracepoint name e.g. including '/', then
the new event is not defined correctly in the eventfs.
. tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmfFKkcbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b/F4H/10qmUSsec9+IbQseg0E
MSRxAhJQ+xOcLfGsWhblW2zirkw9o4PghZYwBodkastu4Wgq2M5ASKd6KqUY2o7D
CX+tCoXf80SDLEVd2go5m72Ml40rrGDEgLvS5YcEa4Iqr5nPZrvCJ7rl2tlqupQH
W2ttOTkX9H28phAFDCsdl5ZJUCJRxlFc6fYG0yZYHsFdRub9J2LPiMTMwIlu56YS
8HH3NxS+wxlKK2I4VfD8mFsOnrNh7MFDLOOwNMlKWvm2wSPbPmVho+eXLAc5xyTO
d+vUpkp4Dp9WWCLuNdO/sqY0IKngO2sM++WbtL/YPP8YijqsrImep4PCR8/fvlN6
Urs=
=dyZm
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe events fixes from Masami Hiramatsu:
- probe-events: Remove unused MAX_ARG_BUF_LEN macro - it is not used
- fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
- tprobe-events: Reject invalid tracepoint name
If a user specifies an invalid tracepoint name (e.g. including '/')
then the new event is not defined correctly in the eventfs.
- tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
* tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Remove unused MAX_ARG_BUF_LEN macro
tracing: fprobe-events: Log error for exceeding the number of entry args
tracing: tprobe-events: Reject invalid tracepoint name
tracing: tprobe-events: Fix a memory leak when tprobe with $retval
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org
Cc: Wen Yang <wenyang@linux.alibaba.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru
Fixes: e31f7939c1 ("ftrace: Avoid potential division by zero in function profiler")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add trace events that fire at osnoise and timerlat sample generation, in
addition to the already existing noise and threshold events.
This allows processing the samples directly in the kernel, either with
ftrace triggers or with BPF.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250203090418.1458923-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add error message when the number of entry argument exceeds the
maximum size of entry data.
This is currently checked when registering fprobe, but in this case
no error message is shown in the error_log file.
Link: https://lore.kernel.org/all/174055074269.4079315.17809232650360988538.stgit@mhiramat.tok.corp.google.com/
Fixes: 25f00e40ce ("tracing/probes: Support $argN in return probe (kprobe and fprobe)")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fix a memory leak when a tprobe is defined with $retval. This
combination is not allowed, but the parse_symbol_and_return() does
not free the *symbol which should not be used if it returns the error.
Thus, it leaks the *symbol memory in that error path.
Link: https://lore.kernel.org/all/174055072650.4079315.3063014346697447838.stgit@mhiramat.tok.corp.google.com/
Fixes: ce51e6153f ("tracing: fprobe-event: Fix to check tracepoint event and return")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458 ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix the following deadlock:
CPU A
_free_event()
perf_kprobe_destroy()
mutex_lock(&event_mutex)
perf_trace_event_unreg()
synchronize_rcu_tasks_trace()
There are several paths where _free_event() grabs event_mutex
and calls sync_rcu_tasks_trace. Above is one such case.
CPU B
bpf_prog_test_run_syscall()
rcu_read_lock_trace()
bpf_prog_run_pin_on_cpu()
bpf_prog_load()
bpf_tracing_func_proto()
trace_set_clr_event()
mutex_lock(&event_mutex)
Delegate trace_set_clr_event() to workqueue to avoid
such lock dependency.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250224221637.4780-1-alexei.starovoitov@gmail.com
Sometimes tracing is used to debug issues during the boot process. Since
the trace buffer has a limited amount of storage, it may be prudent to
disable tracing after the boot is finished, otherwise the critical
information may be overwritten. With this option, the main tracing buffer
will be turned off at the end of the boot process.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/20250208103017.48a7ec83@batman.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As kaslr_offset() is architecture dependent and also may not be defined by
all architectures, when zeroing out unused weak functions, do not check
against kaslr_offset(), but instead check if the address is within the
kernel text sections. If KASLR added a shift to the zeroed out function,
it would still not be located in the kernel text. This is a more robust
way to test if the text is valid or not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Arnd Bergmann" <arnd@arndb.de>
Link: https://lore.kernel.org/20250225182054.471759017@goodmis.org
Fixes: ef378c3b82 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250224180805.GA1536711@ax162/
Closes: https://lore.kernel.org/all/5225b07b-a9b2-4558-9d5f-aa60b19f6317@sirena.org.uk/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The addresses in the mcount_loc can be zeroed and then moved by KASLR
making them invalid addresses. ftrace_call_addr() for ARM 64 expects a
valid address to kernel text. If the addr read from the mcount_loc section
is invalid, it must not call ftrace_call_addr(). Move the addr check
before calling ftrace_call_addr() in ftrace_process_locs().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20250225182054.290128736@goodmis.org
Fixes: ef378c3b82 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: "Arnd Bergmann" <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250225025631.GA271248@ax162/
Closes: https://lore.kernel.org/all/91523154-072b-437b-bbdc-0b70e9783fd0@app.fastmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kmemleak reports the following memory leak after reading set_event file:
# cat /sys/kernel/tracing/set_event
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff110001234449e0 (size 16):
comm "cat", pid 13645, jiffies 4294981880
hex dump (first 16 bytes):
01 00 00 00 00 00 00 00 a8 71 e7 84 ff ff ff ff .........q......
backtrace (crc c43abbc):
__kmalloc_cache_noprof+0x3ca/0x4b0
s_start+0x72/0x2d0
seq_read_iter+0x265/0x1080
seq_read+0x2c9/0x420
vfs_read+0x166/0xc30
ksys_read+0xf4/0x1d0
do_syscall_64+0x79/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue can be reproduced regardless of whether set_event is empty or
not. Here is an example about the valid content of set_event.
# cat /sys/kernel/tracing/set_event
sched:sched_process_fork
sched:sched_switch
sched:sched_wakeup
*:*:mod:trace_events_sample
The root cause is that s_next() returns NULL when nothing is found.
This results in s_stop() attempting to free a NULL pointer because its
parameter is NULL.
Fix the issue by freeing the memory appropriately when s_next() fails
to find anything.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250220031528.7373-1-ahuang12@lenovo.com
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracer should record the preemption level at the point when
the function is invoked. If the tracing subsystem decrement the
preemption counter it needs to correct this before feeding the data into
the trace buffer. This was broken in the commit cited below while
shifting the preempt-disabled section.
Use tracing_gen_ctx_dec() which properly subtracts one from the
preemption counter on a preemptible kernel.
Cc: stable@vger.kernel.org
Cc: Wander Lairson Costa <wander@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de
Fixes: ce5e48036c ("ftrace: disable preemption when recursion locked")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When adding a new fprobe, it will update the function hash to the
functions the fprobe is attached to and register with function graph to
have it call the registered functions. The fprobe_graph_active variable
keeps track of the number of fprobes that are using function graph.
If two fprobes attach to the same function, it increments the
fprobe_graph_active for each of them. But when they are removed, the first
fprobe to be removed will see that the function it is attached to is also
used by another fprobe and it will not remove that function from
function_graph. The logic will skip decrementing the fprobe_graph_active
variable.
This causes the fprobe_graph_active variable to not go to zero when all
fprobes are removed, and in doing so it does not unregister from
function graph. As the fgraph ops hash will now be empty, and an empty
filter hash means all functions are enabled, this triggers function graph
to add a callback to the fprobe infrastructure for every function!
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# echo "f:myevent2 kernel_clone%return" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0024000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
try_to_run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
cleanup_rapl_pmus (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_free_pcibus_map (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_types_exit (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
kvm_shutdown (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
vmx_dump_msrs (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
[..]
# cat /sys/kernel/tracing/enabled_functions | wc -l
54702
If a fprobe is being removed and all its functions are also traced by
other fprobes, still decrement the fprobe_graph_active counter.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.565129766@goodmis.org
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Closes: https://lore.kernel.org/all/20250217114918.10397-A-hca@linux.ibm.com/
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the last fprobe is removed, it calls unregister_ftrace_graph() to
remove the graph_ops from function graph. The issue is when it does so, it
calls return before removing the function from its graph ops via
ftrace_set_filter_ips(). This leaves the last function lingering in the
fprobe's fgraph ops and if a probe is added it also enables that last
function (even though the callback will just drop it, it does add unneeded
overhead to make that call).
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
# echo "f:myevent3 kmem_cache_free" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kmem_cache_free (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
The above enabled a fprobe on kernel_clone, and then on schedule_timeout.
The content of the enabled_functions shows the functions that have a
callback attached to them. The fprobe attached to those functions
properly. Then the fprobes were cleared, and enabled_functions was empty
after that. But after adding a fprobe on kmem_cache_free, the
enabled_functions shows that the schedule_timeout was attached again. This
is because it was still left in the fprobe ops that is used to tell
function graph what functions it wants callbacks from.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.393254452@goodmis.org
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Check if a function is already in the manager ops of a subops. A manager
ops contains multiple subops, and if two or more subops are tracing the
same function, the manager ops only needs a single entry in its hash.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.226762894@goodmis.org
Fixes: 4f554e9556 ("ftrace: Add ftrace_set_filter_ips function")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function graph uses a subops and manager ops mechanism to attach to
ftrace. The manager ops connects to ftrace and the functions it connects
to is defined by a list of subops that it manages.
The function hash that defines what the above ops attaches to limits the
functions to attach if the hash has any content. If the hash is empty, it
means to trace all functions.
The creation of the manager ops hash is done by iterating over all the
subops hashes. If any of the subops hashes is empty, it means that the
manager ops hash must trace all functions as well.
The issue is in the creation of the manager ops. When a second subops is
attached, a new hash is created by starting it as NULL and adding the
subops one at a time. But the NULL ops is mistaken as an empty hash, and
once an empty hash is found, it stops the loop of subops and just enables
all functions.
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
[..]
Fix this by initializing the new hash to NULL and if the hash is NULL do
not treat it as an empty hash but instead allocate by copying the content
of the first sub ops. Then on subsequent iterations, the new hash will not
be NULL, but the content of the previous subops. If that first subops
attached to all functions, then new hash may assume that the manager ops
also needs to attach to all functions.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
Fixes: 87c544108b ("bpf: Send signals asynchronously if !preemptible")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250220042259.1583319-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The amount of memory that ftrace uses to save the descriptors to manage
the functions it can trace is shown at output. But if there are a lot of
functions that are skipped because they were weak or the architecture
added holes into the tables, then the extra pages that were allocated are
freed. But these freed pages are not reflected in the numbers shown, and
they can even be inconsistent with what is reported:
ftrace: allocating 57482 entries in 225 pages
ftrace: allocated 224 pages with 3 groups
The above shows the number of original entries that are in the mcount_loc
section and the pages needed to save them (225), but the second output
reflects the number of pages that were actually used. The two should be
consistent as:
ftrace: allocating 56739 entries in 224 pages
ftrace: allocated 224 pages with 3 groups
The above also shows the accurate number of entires that were actually
stored and does not include the entries that were removed.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200023.221100846@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that weak functions turn into skipped entries, update the check to
make sure the amount that was allocated would fit both the entries that
were allocated as well as those that were skipped.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200023.055162048@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a function is annotated as "weak" and is overridden, the code is not
removed. If it is traced, the fentry/mcount location in the weak function
will be referenced by the "__mcount_loc" section. This will then be added
to the available_filter_functions list. Since only the address of the
functions are listed, to find the name to show, a search of kallsyms is
used.
Since kallsyms will return the function by simply finding the function
that the address is after but before the next function, an address of a
weak function will show up as the function before it. This is because
kallsyms does not save names of weak functions. This has caused issues in
the past, as now the traced weak function will be listed in
available_filter_functions with the name of the function before it.
At best, this will cause the previous function's name to be listed twice.
At worse, if the previous function was marked notrace, it will now show up
as a function that can be traced. Note that it only shows up that it can
be traced but will not be if enabled, which causes confusion.
https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
The commit b39181f7c6 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid
adding weak function") was a workaround to this by checking the function
address before printing its name. If the address was too far from the
function given by the name then instead of printing the name it would
print: __ftrace_invalid_address___<invalid-offset>
The real issue is that these invalid addresses are listed in the ftrace
table look up which available_filter_functions is derived from. A place
holder must be listed in that file because set_ftrace_filter may take a
series of indexes into that file instead of names to be able to do O(1)
lookups to enable filtering (many tools use this method).
Even if kallsyms saved the size of the function, it does not remove the
need of having these place holders. The real solution is to not add a weak
function into the ftrace table in the first place.
To solve this, the sorttable.c code that sorts the mcount regions during
the build is modified to take a "nm -S vmlinux" input, sort it, and any
function listed in the mcount_loc section that is not within a boundary of
the function list given by nm is considered a weak function and is zeroed
out.
Note, this does not mean they will remain zero when booting as KASLR
will still shift those addresses. To handle this, the entries in the
mcount_loc section will be ignored if they are zero or match the
kaslr_offset() value.
Before:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
551
After:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
0
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.883095980@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmeyYIQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNy0H/jWdgjddRaEHQ1RB
e18Oi6MJcTQikHbCHKGZGlyxR4dYxdAONuMmWwgt+266K8qUJSZcNXePwqGEWjx2
qkJ9Tu0Agr8KkfVDtGHGXyd4tuZRpx9Fco6+jKkKiMjjtif7nrUajUGGwRsqGoib
YYzrhbjNZDl17/J58O1E4YZs3w7Lu26PwDR58RZMsSG0pygAfU2fogKcYmi1pTYV
w86icn0LlO8b5Y7fsrY56rLrawnI1RGlxfylUTHzo4QkoIUGvQLB8c6XPMYsVf9R
lvkphu+/fGVnSw577WlVy8DTBso+Pj2nWw4jUTiEAy9hYY6zMxrqrX3XowAwbxj1
m6zP+F8=
=ieVA
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc3' into x86/core, to pick up fixes
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/ff8e6e11df5f928b2b97619ac847b4fa045376a1.1738746821.git.namcao@linutronix.de
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home
Fixes: 9b7bdf6f6e ("tracing: Have trace_printk not use binary prints if boot buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home
Fixes: c76883f18e ("ring-buffer: Add test if range of boot buffer is valid")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently if __tracing_resize_ring_buffer() returns an error, the
tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory
issue that caused the function to fail. If the ring buffer is memory
mapped, then the resizing of the ring buffer will be disabled. But if the
user tries to resize the buffer, it will get an -ENOMEM returned, which is
confusing because there is plenty of memory. The actual error returned was
-EBUSY, which would make much more sense to the user.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213134132.7e4505d7@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Memory mapping the tracing ring buffer will disable resizing the buffer.
But if there's an error in the memory mapping like an invalid parameter,
the function exits out without re-enabling the resizing of the ring
buffer, preventing the ring buffer from being resized after that.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213131957.530ec3c5@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pretty much every caller of is_endbr() actually wants to test something at an
address and ends up doing get_kernel_nofault(). Fold the lot into a more
convenient helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250207122546.181367417@infradead.org
The code was restructured where the function graph notrace code, that
would not trace a function and all its children is done by setting a
NOTRACE flag when the function that is not to be traced is hit.
There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a
TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the
restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used
TRACE_GRAPH_NOTRACE.
For example:
# cd /sys/kernel/tracing
# echo set_track_prepare stack_trace_save > set_graph_notrace
# echo function_graph > current_tracer
# cat trace
[..]
0) | __slab_free() {
0) | free_to_partial_list() {
0) | arch_stack_walk() {
0) | __unwind_start() {
0) 0.501 us | get_stack_info();
Where a non filter trace looks like:
# echo > set_graph_notrace
# cat trace
0) | free_to_partial_list() {
0) | set_track_prepare() {
0) | stack_trace_save() {
0) | arch_stack_walk() {
0) | __unwind_start() {
Where the filter should look like:
# cat trace
0) | free_to_partial_list() {
0) | _raw_spin_lock_irqsave() {
0) 0.350 us | preempt_count_add();
0) 0.351 us | do_raw_spin_lock();
0) 2.440 us | }
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250208001511.535be150@batman.local.home
Fixes: b84214890a ("function_graph: Move graph notrace bit to shadow stack global var")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features to
at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from dot2k,
there are a few manual steps which can be tedious and error prone, like
adding the tracepoints, makefile lines and kconfig, or selecting events
that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those steps to
make creating a new RV monitor much quicker. It is still requires to
select proper tracepoints, this step is harder to automate in a general
way and, in several cases, would still need user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set OSNOISE_WORKLOAD to
the proper value ("on" when running with -k, "off" when running with -u)
every time the option is available instead of setting it only when running
with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally exited earlier
run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number of
CPUs (100+), timerlat can generate more samples than rtla is able to process
via tracefs_iterate_raw_events. This is especially common when the interval
is set to 100us (rteval and cyclictest default) as opposed to the rtla
default of 1000us, but also happens with the rtla default.
Currently, this leads to rtla hanging and having to be terminated with
SIGTERM. SIGINT setting stop_tracing is not enough, since more and more
events are coming and tracefs_iterate_raw_events never exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no more
events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately with
tracefs_iterate_stop, making rtla exit right away instead of waiting for all
events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses events,
making the tracing results inaccurate.
Count both the number of missed events and the total number of processed
events, and display missed events as well as their percentage. The numbers
are displayed for both osnoise and timerlat, even though for the earlier,
missed events are generally not expected.
For hist, the number is displayed at the end of the run; for top, it is
displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever changed,
then the code work break. Change the code to encapsulate this dependency
where the code that uses the structure does not have this dependency.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5UQ4BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qktFAQD2px6MyoOVTssB5Iw3aTWGUfTFoDEc
bfng5JsBxlVJkQEA+2UUvP8FJlLTOQvVEwJiscX7CCJxl5bYkV6GWuGRxQU=
=h//9
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rv and tools/rtla updates from Steven Rostedt:
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features
to at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from
dot2k, there are a few manual steps which can be tedious and error
prone, like adding the tracepoints, makefile lines and kconfig, or
selecting events that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those
steps to make creating a new RV monitor much quicker. It is still
requires to select proper tracepoints, this step is harder to
automate in a general way and, in several cases, would still need
user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set
OSNOISE_WORKLOAD to the proper value ("on" when running with -k,
"off" when running with -u) every time the option is available
instead of setting it only when running with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally
exited earlier run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number
of CPUs (100+), timerlat can generate more samples than rtla is able
to process via tracefs_iterate_raw_events. This is especially common
when the interval is set to 100us (rteval and cyclictest default) as
opposed to the rtla default of 1000us, but also happens with the rtla
default.
Currently, this leads to rtla hanging and having to be terminated
with SIGTERM. SIGINT setting stop_tracing is not enough, since more
and more events are coming and tracefs_iterate_raw_events never
exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no
more events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately
with tracefs_iterate_stop, making rtla exit right away instead of
waiting for all events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses
events, making the tracing results inaccurate.
Count both the number of missed events and the total number of
processed events, and display missed events as well as their
percentage. The numbers are displayed for both osnoise and timerlat,
even though for the earlier, missed events are generally not
expected.
For hist, the number is displayed at the end of the run; for top, it
is displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever
changed, then the code work break. Change the code to encapsulate
this dependency where the code that uses the structure does not have
this dependency.
* tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
rtla: Report missed event count
rtla: Add function to report missed events
rtla: Count all processed events
rtla: Count missed trace events
tools/rtla: Add osnoise_trace_is_off()
rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threads
rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threads
rtla/osnoise: Distinguish missing workload option
rtla/timerlat_top: Abort event processing on second signal
rtla/timerlat_hist: Abort event processing on second signal
rtla/timerlat_top: Stop timerlat tracer on signal
rtla/timerlat_hist: Stop timerlat tracer on signal
rtla: Add trace_instance_stop
tools/rtla: Add basic test suite
verification/dot2k: Implement event type detection
verification/dot2k: Auto patch current kernel source
verification/dot2k: Simplify manual steps in monitor creation
rv: Simplify manual steps in monitor creation
verification/dot2k: Add support for name and description options
verification/dot2k: More robust template variables
...
- Reset idle tasks on reset for runtime verifier
When the runtime verifier is reset, it resets the task's data that is being
monitored. But it only iterates for_each_process() which does not include
the idle tasks. As the idle tasks can be monitored, they need to be reset
as well.
- Fix the enabling and disabling of tracepoints in osnoise
If timerlat is enabled and the WORKLOAD flag is not set, then the osnoise
tracer will enable the migrate task tracepoint to monitor it for its own
workload. The test to enable the tracepoint is done against user space
modifiable parameters. On disabling of the tracer, those same parameters
are used to determine if the tracepoint should be disabled. The problem is
if user space were to modify the parameters after it enables the tracer
then it may not disable the tracepoint.
Instead, a static variable is used to keep track if the tracepoint was
enabled or not. Then when the tracer shuts down, it will use this variable
to decide to disable the tracepoint or not, instead of looking at the user
space parameters.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5UJ1BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qo46AQDjr1yVTyUmzvxe1bMLDoDOq1xeRMRe
4f8CdpOJRxbi0QEAwnl5Ey9Rvcuy8GFpt/USESr4VYWAN10fvsPx7pkphAs=
=RYyn
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier and osnoise fixes from Steven Rostedt:
- Reset idle tasks on reset for runtime verifier
When the runtime verifier is reset, it resets the task's data that is
being monitored. But it only iterates for_each_process() which does
not include the idle tasks. As the idle tasks can be monitored, they
need to be reset as well.
- Fix the enabling and disabling of tracepoints in osnoise
If timerlat is enabled and the WORKLOAD flag is not set, then the
osnoise tracer will enable the migrate task tracepoint to monitor it
for its own workload. The test to enable the tracepoint is done
against user space modifiable parameters. On disabling of the tracer,
those same parameters are used to determine if the tracepoint should
be disabled. The problem is if user space were to modify the
parameters after it enables the tracer then it may not disable the
tracepoint.
Instead, a static variable is used to keep track if the tracepoint
was enabled or not. Then when the tracer shuts down, it will use this
variable to decide to disable the tracepoint or not, instead of
looking at the user space parameters.
* tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Fix resetting of tracepoints
rv: Reset per-task monitors also for idle tasks
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250123204159.4450c88e@gandalf.local.home
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Have emulating atomic64 use arch_spin_locks instead of raw_spin_locks
The tracing ring buffer events have a small timestamp that holds the
delta between itself and the event before it. But this can be tricky
to update when interrupts come in. It originally just set the deltas
to zero for events that interrupted the adding of another event which
made all the events in the interrupt have the same timestamp as the
event it interrupted. This was not suitable for many tools, so it
was eventually fixed. But that fix required adding an atomic64 cmpxchg
on the timestamp in cases where an event was added while another
event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64 bit
timestamp was done by a structure that held multiple 32bit words to hold
parts of the timestamp and a counter. But as updates to the ring buffer
were done, maintaining this became too complex and was replaced by the
atomic64 generic operations which are now used by both 64bit and 32bit
architectures. Shortly after that, it was reported that riscv32 and
other 32 bit architectures that just used the generic atomic64 were
locking up. This was because the generic atomic64 operations defined in
lib/atomic64.c uses a raw_spin_lock() to emulate an atomic64 operation.
The problem here was that raw_spin_lock() can also be traced by the
function tracer (which is commonly used for debugging raw spin locks).
Since the function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off a
warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to be
using raw_spin_locks which have a lot of debugging infrastructure attached
to them (depending on the config options). Instead it should be using
the arch_spin_lock() which does not have any infrastructure attached to
them and is used by low level infrastructure like RCU locks, lockdep
and of course tracing. Using arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64 operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot be
used in NMI context. As an NMI can trigger while holding the atomic64
spin locks it can try to take the same lock and cause a deadlock.
Have the ring buffer fail recording events if in NMI context and the
architecture uses the emulated atomic64 operations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5Jr7RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg7cAPoD/H4BRsFa3UUDnxofTlBuj4A7neJd
rk9ddD9HXH8KywEAhBn1Oujiw81Ayjx7E6s4ednAQX4rldTXBXDyFNuuGgU=
=b13F
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace fing buffer fix from Steven Rostedt:
"Fix atomic64 operations on some architectures for the tracing ring
buffer:
- Have emulating atomic64 use arch_spin_locks instead of
raw_spin_locks
The tracing ring buffer events have a small timestamp that holds
the delta between itself and the event before it. But this can be
tricky to update when interrupts come in. It originally just set
the deltas to zero for events that interrupted the adding of
another event which made all the events in the interrupt have the
same timestamp as the event it interrupted. This was not suitable
for many tools, so it was eventually fixed. But that fix required
adding an atomic64 cmpxchg on the timestamp in cases where an event
was added while another event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64
bit timestamp was done by a structure that held multiple 32bit
words to hold parts of the timestamp and a counter. But as updates
to the ring buffer were done, maintaining this became too complex
and was replaced by the atomic64 generic operations which are now
used by both 64bit and 32bit architectures. Shortly after that, it
was reported that riscv32 and other 32 bit architectures that just
used the generic atomic64 were locking up. This was because the
generic atomic64 operations defined in lib/atomic64.c uses a
raw_spin_lock() to emulate an atomic64 operation. The problem here
was that raw_spin_lock() can also be traced by the function tracer
(which is commonly used for debugging raw spin locks). Since the
function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off
a warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to
be using raw_spin_locks which have a lot of debugging
infrastructure attached to them (depending on the config options).
Instead it should be using the arch_spin_lock() which does not have
any infrastructure attached to them and is used by low level
infrastructure like RCU locks, lockdep and of course tracing. Using
arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64
operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot
be used in NMI context. As an NMI can trigger while holding the
atomic64 spin locks it can try to take the same lock and cause a
deadlock.
Have the ring buffer fail recording events if in NMI context and
the architecture uses the emulated atomic64 operations"
* tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
atomic64: Use arch_spin_locks instead of raw_spin_locks
ring-buffer: Do not allow events in NMI with generic atomic64 cmpxchg()
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and exit.
The calltime and rettime were stored in the generic structures that
were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems than
just the tracer, the calltime and rettime are not needed for them.
Remove the calltime and rettime from the generic fgraph infrastructure
and have the callers that require them handle them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5Jk2BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr3GAQCtzSX6PYTliZKm/Wa5zhebopwhGKEb
Mv0VZejaxYu0hgEA5O57J676FAOaQ7BLzoMojKFhR8RZ6LadKR5r7A0Qzgc=
=Bb/r
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in the
error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did the
same logic as the C code. Add a helper that makes it possible for both
algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake up
when an event is triggered. This will let the application know that the
event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be traced in
modules by writing ":mod:<module>" into set_ftrace_filter. That will
enable either all the functions for the module if it is loaded, or if it
is not, it will cache that command, and when the module is loaded that
matches <module>, its functions will be enabled. This also allows init
functions to be traced. But currently events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event, then
either all the modules events are enabled if it is loaded, or cache it so
that the module's events are enabled when it is loaded. This also works
from the kernel command line, where "trace_event=:mod:<module>", when the
module is loaded at boot up, its events will be enabled then.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5EbMxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkZsAP9Amgx9frSbR1pn1t0I3wVnQx7khgOu
s/b8Ro+vjTx1/QD/RN2AA7f+HK4F27w3Aqfrs0nKXAPtXWsJ9Epp8raG5w8=
=Pg+4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros
to cleanup code and remove all gotos from kprobes code. This work
includes below changes.
. kprobes: Adopt guard() and scoped_guard()
. jump_label: Define guard() for jump_label_lock
. kprobes: Use guard() for external locks
. kprobes: Use guard for rcu_read_lock
. kprobes: Remove unneeded goto
. kprobes: Remove remaining gotos
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
This work includes below changes.
. tracing/kprobe: Adopt guard() and scoped_guard()
. tracing/uprobe: Adopt guard() and scoped_guard()
. tracing/eprobe: Adopt guard() and scoped_guard()
. tracing: Use __free() in trace_probe for cleanup
. tracing: Use __free() for kprobe events to cleanup
. tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time only when getting the module
refcount in check_kprobe_access_safe(). Previously it disabled
preempt needlessly for other checks including
jump_label_text_reserved(), but it took long time because of
the linear search.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmeNy8kbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b/UoIAMYX8pYtLMZjokKSlsnN
Y3rMZecFJNKfXeA62YazpESO9n+BYyqj/Zj25Ws4YzdfnoT4kGtMuoUCS7d5U3lo
RZO/a7i3TgrzQdWbRwBz7l75h+FnCAsrSoLGoH/sQxXUP+p/2C6GJG3O3A/0qMaS
TPp7/nsR78P7MSf6Yr/ODZj0UWMSX6a6QNrzwloiMUjY6aPxz7K1on9cdzMF2QPE
fgtJk+JbCn9nLOJi/SVlO+wu4EfdKrfT7sqz9taNX/eQYmx2O9fE3R92Qvhxh79r
MrqcrMfcwfWtX+yD1kb9mf+jMNYy8Dhcf595B0TGSzCZq64ir9UukntR6YD3raAO
Wm0=
=qmrY
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
-----BEGIN PGP SIGNATURE-----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=f2CA
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
The function graph infrastructure is now generic so that kretprobes,
fprobes and BPF can use it. But there is still some leftover logic that
only the function graph tracer itself uses. This is the calculation of the
calltime and return time of the functions. The calculation of the calltime
has been moved into the function graph tracer and those users that need it
so that it doesn't cause overhead to the other users. But the return
function timestamp was still called.
Instead of just moving the taking of the timestamp into the function graph
trace remove the calltime and rettime completely from the ftrace_graph_ret
structure. Instead, move it into the function graph return entry event
structure and this also moves all the calltime and rettime logic out of
the generic fgraph.c code and into the tracing code that uses it.
This has been reported to decrease the overhead by ~27%.
Link: https://lore.kernel.org/all/Z3aSuql3fnXMVMoM@krava/
Link: https://lore.kernel.org/all/173665959558.1629214.16724136597211810729.stgit@devnote2/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250121194436.15bdf71a@gandalf.local.home
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function. The
fprobe and kretprobe logic implements a similar method as the function
graph tracer to trace the end of the function. That is to hijack the
return address and jump to a trampoline to do the trace when the function
exits. To do this, a shadow stack needs to be created to store the
original return address. Fprobes and function graph do this slightly
differently. Fprobes (and kretprobes) has slots per callsite that are
reserved to save the return address. This is fine when just a few points
are traced. But users of fprobes, such as BPF programs, are starting to add
many more locations, and this method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started, every
task gets its own shadow stack to hold the return address that is going to
be traced. The function graph tracer has been updated to allow multiple
users to use its infrastructure. Now have fprobes be one of those users.
This will also allow for the fprobe and kretprobe methods to trace the
return address to become obsolete. With new technologies like CFI that
need to know about these methods of hijacking the return address, going
toward a solution that has only one method of doing this will make the
kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in the
error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable interrupts and
not trace NMIs. But the code has changed to allow NMIs and also
interrupts. This change was done a long time ago, but the disabling of
interrupts was never removed. Remove the disabling of interrupts in the
function graph tracer is it is not needed. This greatly improves its
performance.
- Allow the :mod: command to enable tracing module functions on the kernel
command line.
The function tracer already has a way to enable functions to be traced in
modules by writing ":mod:<module>" into set_ftrace_filter. That will
enable either all the functions for the module if it is loaded, or if it
is not, it will cache that command, and when the module is loaded that
matches <module>, its functions will be enabled. This also allows init
functions to be traced. But currently events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC
2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4=
=snbx
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
- Clean up the __rb_map_vma() logic
The logic of __rb_map_vma() has a error check with WARN_ON() that makes
sure that the index does not go past the end of the array of buffers. The
test in the loop pretty much guarantees that it will never happen, but
since the relation of the variables used is a little complex, the
WARN_ON() check was added. It was noticed that the array was dereferenced
before this check and if the logic does break and for some reason the
logic goes past the array, there will be an out of bounds access here.
Move the access to after the WARN_ON().
- Consolidate how the ring buffer is determined to be empty
Currently there's two ways that are used to determine if the ring buffer
is empty. One relies on the status of the commit and reader pages and what
was read, and the other is on what was written vs what was read. By using
the number of entries (written) method, it can be used for reading events
that are out of the kernel's control (what pKVM will use). Move to this
method to make it easier to implement a pKVM ring buffer that the kernel
can read.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42XuRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn3GAQCOQ94vr88FSXb/azC9281iDGYC/KbJ
7J4dGv2rXHpoVAEAtXRXSXpG0mTIJ6TtgVKgMrIFAuT/AVo4EIUr2q/CsgA=
=2G7c
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring-buffer updates from Steven Rostedt:
- Clean up the __rb_map_vma() logic
The logic of __rb_map_vma() has a error check with WARN_ON() that
makes sure that the index does not go past the end of the array of
buffers. The test in the loop pretty much guarantees that it will
never happen, but since the relation of the variables used is a
little complex, the WARN_ON() check was added. It was noticed that
the array was dereferenced before this check and if the logic does
break and for some reason the logic goes past the array, there will
be an out of bounds access here. Move the access to after the
WARN_ON().
- Consolidate how the ring buffer is determined to be empty
Currently there's two ways that are used to determine if the ring
buffer is empty. One relies on the status of the commit and reader
pages and what was read, and the other is on what was written vs what
was read. By using the number of entries (written) method, it can be
used for reading events that are out of the kernel's control (what
pKVM will use). Move to this method to make it easier to implement a
pKVM ring buffer that the kernel can read.
* tag 'trace-ringbuffer-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Make reading page consistent with the code logic
ring-buffer: Check for empty ring-buffer with rb_num_of_entries()
The following works fine:
~# echo ':mod:trace_events_sample' > /sys/kernel/tracing/set_event
~# cat /sys/kernel/tracing/set_event
*:*:mod:trace_events_sample
~#
But if a name is given without a ':' where it can match an event name or
system name, the output of the cached events does not include a new line:
~# echo 'foo_bar:mod:trace_events_sample' > /sys/kernel/tracing/set_event
~# cat /sys/kernel/tracing/set_event
foo_bar:mod:trace_events_sample~#
Add the '\n' to that as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250121151336.6c491844@gandalf.local.home
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The adding of cached events for modules not loaded yet required a
descriptor to separate the iteration of events with the iteration of
cached events for a module. But the allocation used the size of the
pointer and not the size of the contents to allocate its data and caused a
slab-out-of-bounds.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250121151236.47fcf433@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z4_OHKESRSiJcr-b@lappy/
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some architectures can not safely do atomic64 operations in NMI context.
Since the ring buffer relies on atomic64 operations to do its time
keeping, if an event is requested in NMI context, reject it for these
architectures.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/20250120235721.407068250@goodmis.org
Fixes: c84897c0ff ("ring-buffer: Remove 32bit timestamp logic")
Closes: https://lore.kernel.org/all/86fb4f86-a0e4-45a2-a2df-3154acc4f086@gaisler.com/
Reported-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Seqlock optimizations that arose in a perf context and were
merged into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount ((Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
- Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages
in advance (Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin Cui)
- Export perf_exclude_event() (Namhyung Kim)
- Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
- AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
- AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
- Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
- Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8XB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
-----BEGIN PGP SIGNATURE-----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=EXYs
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
The static function in trace_events.c called update_cache() is too generic
and conflicts with the function defined in arch/openrisc/include/asm/pgtable.h
Rename it to update_mod_cache() to make it less generic.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250120172756.4ecfb43f@batman.local.home
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501210550.Ufrj5CRn-lkp@intel.com/
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4pR0wAKCRCRxhvAZXjc
ojb2AQD5QfpTEX/ju1TkenTvoNl+JfnIjaVSY40Lm9DWYzmCMAEAuRvf5WRIV713
00/RVOrUvsLobzhmnk0yw53EQ5A+pA0=
=2NDA
-----END PGP SIGNATURE-----
Merge tag 'kernel-6.14-rc1.pid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_max namespacing update from Christian Brauner:
"The pid_max sysctl is a global value. For a long time the default
value has been 65535 and during the pidfd dicussions Linus proposed to
bump pid_max by default. Based on this discussion systemd started
bumping pid_max to 2^22. So all new systems now run with a very high
pid_max limit with some distros having also backported that change.
The decision to bump pid_max is obviously correct. It just doesn't
make a lot of sense nowadays to enforce such a low pid number. There's
sufficient tooling to make selecting specific processes without typing
really large pid numbers available.
In any case, there are workloads that have expections about how large
pid numbers they accept. Either for historical reasons or
architectural reasons. One concreate example is the 32-bit version of
Android's bionic libc which requires pid numbers less than 65536.
There are workloads where it is run in a 32-bit container on a 64-bit
kernel. If the host has a pid_max value greater than 65535 the libc
will abort thread creation because of size assumptions of
pthread_mutex_t.
That's a fairly specific use-case however, in general specific
workloads that are moved into containers running on a host with a new
kernel and a new systemd can run into issues with large pid_max
values. Obviously making assumptions about the size of the allocated
pid is suboptimal but we have userspace that does it.
Of course, giving containers the ability to restrict the number of
processes in their respective pid namespace indepent of the global
limit through pid_max is something desirable in itself and comes in
handy in general.
Independent of motivating use-cases the existence of pid namespaces
makes this also a good semantical extension and there have been prior
proposals pushing in a similar direction. The trick here is to
minimize the risk of regressions which I think is doable. The fact
that pid namespaces are hierarchical will help us here.
What we mostly care about is that when the host sets a low pid_max
limit, say (crazy number) 100 that no descendant pid namespace can
allocate a higher pid number in its namespace. Since pid allocation is
hierarchial this can be ensured by checking each pid allocation
against the pid namespace's pid_max limit. This means if the
allocation in the descendant pid namespace succeeds, the ancestor pid
namespace can reject it. If the ancestor pid namespace has a higher
limit than the descendant pid namespace the descendant pid namespace
will reject the pid allocation. The ancestor pid namespace will
obviously not care about this.
All in all this means pid_max continues to enforce a system wide limit
on the number of processes but allows pid namespaces sufficient leeway
in handling workloads with assumptions about pid values and allows
containers to restrict the number of processes in a pid namespace
through the pid_max interface"
* tag 'kernel-6.14-rc1.pid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tests/pid_namespace: add pid_max tests
pid: allow pid_max to be set per pid namespace
A typo was introduced when adding the ":mod:" command that did
a "#if CONFIG_MODULES" instead of a "#ifdef CONFIG_MODULES".
Fix it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250120125745.4ac90ca6@gandalf.local.home
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501190121.E2CIJuUj-lkp@intel.com/
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the :mod: command is written into /sys/kernel/tracing/set_event (or
that file within an instance), if the module specified after the ":mod:"
is not yet loaded, it will store that string internally. When the module
is loaded, it will enable the events as if the module was loaded when the
string was written into the set_event file.
This can also be useful to enable events that are in the init section of
the module, as the events are enabled before the init section is executed.
This also works on the kernel command line:
trace_event=:mod:<module>
Will enable the events for <module> when it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.514730995@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a :mod: command to enable only events from a given module from the
set_events file.
echo '*:mod:<module>' > set_events
Or
echo ':mod:<module>' > set_events
Will enable all events for that module. Specific events can also be
enabled via:
echo '<event>:mod:<module>' > set_events
Or
echo '<system>:<event>:mod:<module>' > set_events
Or
echo '*:<event>:mod:<module>' > set_events
The ":mod:" keyword is consistent with the function tracing filter to
enable functions from a given module.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.214496360@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer has become generic so that kretprobes and BPF
can use it along with function graph tracing itself. Some of the
infrastructure was specific for function graph tracing such as recording
the calltime and return time of the functions. Calling the clock code on a
high volume function does add overhead. The calculation of the calltime
was removed from the generic code and placed into the function graph
tracer itself so that the other users did not incur this overhead as they
did not need that timestamp.
The calltime field was still kept in the generic return entry structure
and the function graph return entry callback filled it as that structure
was passed to other code.
But this broke both irqsoff and wakeup latency tracer as they still
depended on the trace structure containing the calltime when the option
display-graph is set as it used some of those same functions that the
function graph tracer used. But now the calltime was not set and was just
zero. This caused the calculation of the function time to be the absolute
value of the return timestamp and not the length of the function.
# cd /sys/kernel/tracing
# echo 1 > options/display-graph
# echo irqsoff > current_tracer
The tracers went from:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 4) <idle>-0 | d..1. | 0.000 us | irqentry_enter();
3 us | 4) <idle>-0 | d..2. | | irq_enter_rcu() {
4 us | 4) <idle>-0 | d..2. | 0.431 us | preempt_count_add();
5 us | 4) <idle>-0 | d.h2. | | tick_irq_enter() {
5 us | 4) <idle>-0 | d.h2. | 0.433 us | tick_check_oneshot_broadcast_this_cpu();
6 us | 4) <idle>-0 | d.h2. | 2.426 us | ktime_get();
9 us | 4) <idle>-0 | d.h2. | | tick_nohz_stop_idle() {
10 us | 4) <idle>-0 | d.h2. | 0.398 us | nr_iowait_cpu();
11 us | 4) <idle>-0 | d.h1. | 1.903 us | }
11 us | 4) <idle>-0 | d.h2. | | tick_do_update_jiffies64() {
12 us | 4) <idle>-0 | d.h2. | | _raw_spin_lock() {
12 us | 4) <idle>-0 | d.h2. | 0.360 us | preempt_count_add();
13 us | 4) <idle>-0 | d.h3. | 0.354 us | do_raw_spin_lock();
14 us | 4) <idle>-0 | d.h2. | 2.207 us | }
15 us | 4) <idle>-0 | d.h3. | 0.428 us | calc_global_load();
16 us | 4) <idle>-0 | d.h3. | | _raw_spin_unlock() {
16 us | 4) <idle>-0 | d.h3. | 0.380 us | do_raw_spin_unlock();
17 us | 4) <idle>-0 | d.h3. | 0.334 us | preempt_count_sub();
18 us | 4) <idle>-0 | d.h1. | 1.768 us | }
18 us | 4) <idle>-0 | d.h2. | | update_wall_time() {
[..]
To:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 5) <idle>-0 | d.s2. | 0.000 us | _raw_spin_lock_irqsave();
0 us | 5) <idle>-0 | d.s3. | 312159583 us | preempt_count_add();
2 us | 5) <idle>-0 | d.s4. | 312159585 us | do_raw_spin_lock();
3 us | 5) <idle>-0 | d.s4. | | _raw_spin_unlock() {
3 us | 5) <idle>-0 | d.s4. | 312159586 us | do_raw_spin_unlock();
4 us | 5) <idle>-0 | d.s4. | 312159587 us | preempt_count_sub();
4 us | 5) <idle>-0 | d.s2. | 312159587 us | }
5 us | 5) <idle>-0 | d.s3. | | _raw_spin_lock() {
5 us | 5) <idle>-0 | d.s3. | 312159588 us | preempt_count_add();
6 us | 5) <idle>-0 | d.s4. | 312159589 us | do_raw_spin_lock();
7 us | 5) <idle>-0 | d.s3. | 312159590 us | }
8 us | 5) <idle>-0 | d.s4. | 312159591 us | calc_wheel_index();
9 us | 5) <idle>-0 | d.s4. | | enqueue_timer() {
9 us | 5) <idle>-0 | d.s4. | | wake_up_nohz_cpu() {
11 us | 5) <idle>-0 | d.s4. | | native_smp_send_reschedule() {
11 us | 5) <idle>-0 | d.s4. | 312171987 us | default_send_IPI_single_phys();
12408 us | 5) <idle>-0 | d.s3. | 312171990 us | }
12408 us | 5) <idle>-0 | d.s3. | 312171991 us | }
12409 us | 5) <idle>-0 | d.s3. | 312171991 us | }
Where the calculation of the time for each function was the return time
minus zero and not the time of when the function returned.
Have these tracers also save the calltime in the fgraph data section and
retrieve it again on the return to get the correct timings again.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250113183124.61767419@gandalf.local.home
Fixes: f1f36e22be ("ftrace: Have calltime be saved in the fgraph storage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In the loop of __rb_map_vma(), the 's' variable is calculated from the
same logic that nr_pages is and they both come from nr_subbufs. But the
relationship is not obvious and there's a WARN_ON_ONCE() around the 's'
variable to make sure it never becomes equal to nr_subbufs within the
loop. If that happens, then the code is buggy and needs to be fixed.
The 'page' variable is calculated from cpu_buffer->subbuf_ids[s] which is
an array of 'nr_subbufs' entries. If the code becomes buggy and 's'
becomes equal to or greater than 'nr_subbufs' then this will be an out of
bounds hit before the WARN_ON() is triggered and the code exiting safely.
Make the 'page' initialization consistent with the code logic and assign
it after the out of bounds check.
Link: https://lore.kernel.org/20250110162612.13983-1-aha310510@gmail.com
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
[ sdr: rewrote change log ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently there are two ways of identifying an empty ring-buffer. One
relying on the current status of the commit / reader page
(rb_per_cpu_empty()) and the other on the write and read counters
(rb_num_of_entries() used in rb_get_reader_page()).
with rb_num_of_entries(). This intends to ease later
introduction of ring-buffer writers which are out of the kernel control
and with whom, the only information available is through the meta-page
counters.
Link: https://lore.kernel.org/20250108114536.627715-2-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add ftrace_get_entry_ip() which is only for ftrace based probes, and use
it for kprobe multi probes because they are based on fprobe which uses
ftrace instead of kprobes.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173566081414.878879.10631096557346094362.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In __trace_kprobe_create(), if something fails it must goto error block
to free objects. But when strdup() a symbol, it returns without that.
Fix it to goto the error block to free objects correctly.
Link: https://lore.kernel.org/all/173643297743.1514810.2408159540454241947.stgit@devnote2/
Fixes: 6212dd2968 ("tracing/kprobes: Use dyn_event framework for kprobe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When kprobe multi bpf program can't be executed due to recursion check,
we currently return 0 (success) to fprobe layer where it's ignored for
standard kprobe multi probes.
For kprobe session the success return value will make fprobe layer to
install return probe and try to execute it as well.
But the return session probe should not get executed, because the entry
part did not run. FWIW the return probe bpf program most likely won't get
executed, because its recursion check will likely fail as well, but we
don't need to run it in the first place.. also we can make this clear
and obvious.
It also affects missed counts for kprobe session program execution, which
are now doubled (extra count for not executed return probe).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250106175048.1443905-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
