This adds bindings for MT7988 pinctrl driver.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20241217085435.9586-4-linux@fw-web.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No core changes this time.
New drivers:
- Xlinix Versal pin control driver.
- Ocelot LAN969x pin control driver.
- T-Head TH1520 RISC-V SoC pin control driver.
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC
pin control drivers.
- Qualcomm SM8750 LPASS (low power audio subsystem)
pin control driver.
- Qualcomm PM8937 mixsig IC pin control support, GPIO and
MPP (multi-purpose-pin).
- Samsung Exynos8895 and Exynos9810 SoC pin control driver.
- SpacemiT K1 SoC pin control driver.
- Airhoa EN7581 IC pin control driver.
Improvements:
- The Renesas subdriver now supports schmitt-trigger and
open drain pin configurations if the hardware supports it.
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC.
- Support the DSW community in the Intel Elkhartlake SoC.
-----BEGIN PGP SIGNATURE-----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=F7bj
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
Adding gpio-line-names property works fine for this
device node, but dtb check drops warning:
'gpio-line-names' does not match any of the regexes: '-cfg$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml#
Allow to add property gpio-line-names for this devices.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20241105064206.43626-3-hs@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/20241104-pxa1908-lkml-v13-2-e050609b8d6c@skole.hr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It should be PINMUX/PINMUX2, not GPIOMUX/GPIOMUX2, see
<dt-bindings/pinctrl/pinctrl-cv1800b.h>.
Fixes: 64aa494de6 ("dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.")
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20241029012312.3448287-1-unicornxw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document the 8 GPIOs found on PM8937. It has holes on
3,4 and 6 pins.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-1-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. Add new pin controller drivers for new Samsung SoCs: Exynos8895,
Exynos9810, Exynos990.
2. Correct the condition when applying further interrupt constraints on
certain Samsung pin controllers. The condition was simply not
effective.
-----BEGIN PGP SIGNATURE-----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=Y1vm
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.13
1. Add new pin controller drivers for new Samsung SoCs: Exynos8895,
Exynos9810, Exynos990.
2. Correct the condition when applying further interrupt constraints on
certain Samsung pin controllers. The condition was simply not
effective.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
YAML binding file provides the conversion of the original text-based
binding for the pinctrl-mcp23s08 to microchip,mcp23s08.yaml.
following compatible strings using the deprecated mcp prefix have been
removed from this binding:
- mcp,mcp23s08
- mcp,mcp23s17
- mcp,mcp23008
- mcp,mcp23017
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20241028063939.6276-1-himanshu.bhavani@siliconsignals.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the compatible for Samsung Exynos9810 pinctrl eint block
to the schema. It is compatible with Exynos850 EINT controller,
and doesn't have a dedicated IRQ line.
Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241026-exynos9810-v3-4-b89de9441ea8@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a compatible for Samsung Exynos9810 pinctrl block to the schema.
Exynos9810 has 9 total pin banks and it's similar to other Samsung
SoC pinctrl blocks.
Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241026-exynos9810-v3-3-b89de9441ea8@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The block found on Apple's A7-A11 SoCs are compatible with the
existing driver so add their per-SoC compatibles.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
The IOMUXC controller description is almost identical on i.MX35/5x/6 SoCs,
except for the configuration bits which differ across SoCs. Rename the
fsl,imx6ul-pinctrl.yaml to fsl,imx35-pinctrl.yaml, fill in compatible
strings for the other SoCs and fill in the various bits into desciption.
This way, i.MX35/5x/6 series SoCs can all be converted to DT schema.
Remove the old text DT bindings description.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/20241017211241.170861-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add DT bindings for the TLMM controller on QCS8300 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/20241018-qcs8300_tlmm-v3-1-8b8d3957cf1a@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Marks GPIOs as used on RZ/A1 and RZ/A2,
- Add open-drain and schmitt-trigger support on RZ/V2H(P),
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZxJNNgAKCRCKwlD9ZEnx
cC3jAQDNM1sh8LuEi6lMhgOKvnNPI0l2/HUvIgqtp347/x9/BwD/ZWiTB1Wu7tA1
allIRqsiteZSsFW3u6jTlqv/wDSoxAs=
=Xzt5
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.13
- Marks GPIOs as used on RZ/A1 and RZ/A2,
- Add open-drain and schmitt-trigger support on RZ/V2H(P),
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a dedicated compatible for the exynos990-wakeup-eint node.
This SoC pin controller does not mux interrupts. It's compatible with
Exynos 850's node, while also being compatible with the Exynos7
fallback.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241016154838.64515-3-igor.belwon@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Commit 904140fa45 ("dt-bindings: pinctrl: samsung: use Exynos7
fallbacks for newer wake-up controllers") added
samsung,exynos7-wakeup-eint fallback to some compatibles, so the
intention in the if:then: conditions was to handle the cases:
1. Single Exynos7 compatible or Exynos5433+Exynos7 or
Exynos7885+Exynos7: only one interrupt
2. Exynos850+Exynos7: no interrupts
This was not implemented properly however and if:then: block matches
only single Exynos5433 or Exynos7885 compatibles, which do not exist in
DTS anymore, so basically is a no-op and no enforcement on number of
interrupts is made by the binding.
Fix the if:then: condition so interrupts in the Exynos5433 and
Exynos7885 wake-up pin controller will be properly constrained.
Fixes: 904140fa45 ("dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers")
Cc: stable@vger.kernel.org
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241015065848.29429-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On the RZ/V2H(P) SoC one can configure the 'input-schmitt-{enable,disable}',
'drive-open-drain' and 'drive-push-pull' of multiplexed pins. Update the
binding documentation to include these properties.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20241004123658.764557-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Top Level Mode Multiplexer on the QCS615 Platform.
It concisely explains the pin multiplexing and configuration in
the device tree, and includes simple examples of typical device
tree snippets, making it easier for designers to configure and
manage chip pins.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/20240920-add_qcs615_pinctrl_driver-v2-1-e03c42a9d055@quicinc.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add bindings for the pin controllers on the T-Head TH1520 RISC-V SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: add thead,pad-group to select the pin controller instance]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20240930-th1520-pinctrl-v3-1-32cea2bdbecb@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lan969x is going to reuse the existing Ocelot pinctrl driver - document
that by adding compatible strings for the different SKU's that we
support.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/20240917-lan969x-pinctrl-v2-1-ea02cbc56831@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add compatible for TLMM block representing support on SA8255p.
SA8255p uses the same TLMM block as SA8775p however the ownership
of pins are split between Firmware VM and Linux VM on SA8255p. For
example, pins used by UART are owned and configured by Firmware VM
while pins used by ethernet are owned and configured by Linux VM.
Therefore, adding a sa8255p specific compatible to mark the difference.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240905200218.3810712-1-quic_nkela@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add Xilinx Versal compatible string and corresponding groups, function and
pins properties to support pin controller features on Versal platform.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20240906110113.3154327-2-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC.
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC.
- Rockchip rk3576 pin control support.
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000.
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton
and a few other drivers.
-----BEGIN PGP SIGNATURE-----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=7uZC
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----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=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZtMgmgAKCRCejrg/N2X7
/YHUAP9q4iY9zv4V2bY8jsxzQCNZpAs1E+vRBJWRhzlh6YpTFgD+NVM7eYP2qAe9
lNjE76KaXzuKWUA11mVfCrjhzi7ocgs=
=RQ5+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IOnx
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZsb/9AAKCRCKwlD9ZEnx
cE82AQD3RLb5BZyvGoLBWUGf4n/d2xEap5FrLO0R0r8XuiXjFAEAy2Ww6740vqJN
MIsXQFfDKJ8oXeQ+trULiN0OTqXgdA0=
=vzFq
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.12
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Sophgo CV18XX platform, threshold strength of schmitt trigger can
be configured. As this standard property is already supported by the
common pinconf code. Add "input-schmitt-microvolt" property in
pincfg-node.yaml so that other platforms requiring such feature can
make use of this property.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953C71C87FD150D2E64FF41BBAC2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.
The pinctrl bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/20240730-mbly-pinctrl-v2-1-d470f64e0395@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The binding is supposed to describe the properties of each element
of the pinctrl-single,gpio-range array entry, however when we use
"- items:" instead of "items:", it explicitly describes that there
is just a single entry in the array.
The pinctrl-single,gpio-range property should describe more than one
entry in the array. Fix the typo and adjust the alignment of the
description of the entries appropriately.
Fixes: 677a62482b ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20240627150610.469645-1-nm@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The "pinctrl-single,input-schmitt" have four arguments in the bindings
but the driver needs two. According to the meaning of other properties
and driver, it should have "enable" suffix. Fortunately, there is no
dts using this property, so it is safe to correct this property with the
right name.
Rename existed property "pinctrl-single,input-schmitt" to
"pinctrl-single,input-schmitt-enable" and add the right description for
property "pinctrl-single,input-schmitt" used by the driver.
Fixes: 677a62482b ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953D5E7D7D68DDCE31C0031BBCF2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.
Add "NCSI" pin groups that are equivalent to the RMII pin groups, but
without the RMIIXRCLKO pin.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/20240621093142.698529-2-potin.lai.pt@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support specifying the function per-pin. The driver doesn't care
whether you use pins or groups for this purpose.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240610223550.2449230-2-sean.anderson@linux.dev
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the new RZ/V2H(P) (R9A09G057) Soc,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZmwB0AAKCRCKwlD9ZEnx
cKIJAQDoO2BVZmaYJvJoiV8mHUdcRqj94pL5GF2tvNb/cKqdwQEA8ceFXJC2zp0L
6yjNrDI29WVHsdcQLTy5dAWYeRgJPAQ=
=O4N5
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.11
- Add support for the new RZ/V2H(P) (R9A09G057) Soc,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
i.MX91 and i.MX93 share similar design. They could share same dt-binding
doc, so rename fsl,imx93-pinctrl.yaml to fsl,imx9-pinctrl.yaml and add
i.MX91 compatible string
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240513-imx91-pinctrl-v1-1-c99a23c6843a@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The binding for PM8008 is being reworked so that internal details like
interrupts and register offsets are no longer described. This
specifically also involves dropping the gpio child node and its
compatible string which is no longer needed.
Note that there are currently no users of the upstream binding and
driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240529162958.18081-10-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add documentation for the pin controller found on the Renesas RZ/V2H(P)
(R9A09G057) SoC. The RZ/V2H PFC varies slightly compared to the RZ/G2L
family:
- Additional bits need to be set during pinmuxing,
- The GPIO pin count is different.
Hence, a SoC-specific compatible string, 'renesas,r9a09g057-pinctrl', is
added for the RZ/V2H(P) SoC.
Also, add the 'renesas,output-impedance' property. The drive strength
settings on RZ/V2H(P) depend on the different power rails coming out from
the PMIC (connected via I2C). These power rails (required for drive
strength) can be 1.2V, 1.8V, or 3.3V.
Pins are grouped into 4 groups:
Group 1: Impedance
- 150/75/38/25 ohms (at 3.3V)
- 130/65/33/22 ohms (at 1.8V)
Group 2: Impedance
- 50/40/33/25 ohms (at 1.8V)
Group 3: Impedance
- 150/75/37.5/25 ohms (at 3.3V)
- 130/65/33/22 ohms (at 1.8V)
Group 4: Impedance
- 110/55/30/20 ohms (at 1.8V)
- 150/75/38/25 ohms (at 1.2V)
The 'renesas,output-impedance' property, as documented, can be
[0, 1, 2, 3], these correspond to register bit values that can
be set in the PFC_IOLH_mn register, which adjusts the drive
strength value and is pin-dependent.
As power rail information may not be available very early in the boot
process, the 'renesas,output-impedance' property is added instead of
reusing the 'output-impedance-ohms' property.
Also, allow bias-disable, bias-pull-down and bias-pull-up properties
as these can be used to configure the pins.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240606085133.632307-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
-----BEGIN PGP SIGNATURE-----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=wjQ1
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.10
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MT7622 pinctrl has ANTSEL* pins. Linux support for those was added in
the commit 19f599e83a ("pinctrl: mediatek: mt7622: add antsel
pins/groups"). Include them in binding.
Cc: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-2-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c63 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard
and HP TouchPad. It works the same as all others, so just add the
compatible string for this variant.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Message-ID: <20240417073532.3718510-1-github.com@herrie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow specifying a GPIO hog, as already used on
qcom-msm8974-lge-nexus5-hammerhead.dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240409-qcom-pmic-gpio-hog-v2-1-5ff812d2baed@z3ntu.xyz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow specifying pin to GPIO mapping. It can be find in in-Linux DTS
file for MT7622.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240408105128.30586-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMIH0108 and PMD8028 PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-3-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMXR2230 and PM6450 PMICs.
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Acked-by: Krzystof Kozlowski <krzystof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-2-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On the RZ/G3S SMARC platform, the 'input' property is utilized in
gpio-hog nodes, and the 'output-enable' property is used for ETH0/1 TXC
pins. Update the binding documentation to include these properties,
addressing the following dtbs_check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: key-1-gpio-hog: 'anyOf' conditional failed, one must be fixed:
'input' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: eth0: 'anyOf' conditional failed, one must be fixed:
'output-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240313083828.5048-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----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=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
Use compatible name "qcom,sm4450-tlmm" instead of "qcom,sm4450-pinctrl"
to match the compatible name in sm4450 pinctrl driver.
Fixes: 7bf8b78f86 ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240129092512.23602-2-quic_tengfan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210624214458.68716-1-mail@david-bauer.net
[Fixed up minor bugs found by new checking tools]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZdh+5gAKCRCKwlD9ZEnx
cKiIAP9/dNg+l+cgCuI24EKaIehYnjq54clsWycHBV8i41brPgEAutwuYNMG++Vd
B/iDXOihVSvOhjpQluQMtoYaUBmOCQc=
=N37y
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9 (take two)
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update maxItems to 60 for gpio-reserved-ranges to allow multiple gpio
reserved ranges.
Add input-enable property to allow configuring a pin as input.
Also update example.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240206112501.715042-1-naresh.solanki@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The structure of the NVIDIA Tegra234 common pinmux schema doesn't work
for restricting properties because a child node schema can't be extended
with additional properties from another schema defining the same child
node. The 2 child node schemas are evaluated independently as the
schemas are not recursively combined in any way.
As the common schema is almost all the child node schema anyways, just
remove the parent node from the common schema. Then add 'reg' and adjust
the $ref's in the users of the common schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240202223454.1667383-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Compatible string doesn't really match with compatible string listed in the
driver itself. While binding was converted from txt to yaml
xlnx,zynq-pinctrl was listed as compatible string but example was using
xlnx,pinctrl-zynq and also this string is used in all DTSes.
xlnx,zynq-pinctrl is used only in dt binding and not present in any DT
which is stable for quite a long time that's why use old compatible string
and update binding document instead of starting to use unused compatible
string.
Fixes: 153df45acd ("dt-bindings: pinctrl: pinctrl-zynq: Convert to yaml")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/c1307a4dd5e30290acacc786cb2170deb9eaa539.1706087258.git.michal.simek@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pincfg-node.yaml already defines the type for "slew-rate", so drop the
type from the nuvoton,npcm845-pinctrl binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190106.1540585-2-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
nuvoton,npcm845-pinctrl defines the common "input-debounce" property as
an array rather than an scalar. Update the common definition to expand
it to an uint32-array, and update all the users of the property with
array constraints.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240124190106.1540585-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
